A Semiconducting Bi2O2(C4O4) Coordination Polymer Showing a Photoelectric Response

Quasi-2D Bi0.775Ln0.225O1.5 (Ln = La, Pr, Nd, Sm, Eu): reversible iodine intercalation and their evaluation as the anode in the lithium-ion battery system

Layered materials with a robust structure and reversible intercalation behavior are highly sought-after in applications involving energy conversion and storage systems, energy converting devices, supercapacitors, batteries, superconductors, photonic materials, and catalysis involving hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), solar cells and sensors. In the current study, quasi-2D rhombohedral Bi0.775Ln0.225O1.5 (Ln = La, Pr, Nd, Sm, and Eu) samples, synthesized by a solution combustion route, have been demonstrated to intercalate iodine reversibly. A solid-vapor reaction was employed to intercalate iodine at moderate temperatures, and deintercalation occurred on heating at higher temperatures. Expansion of the rhombohedral c-axis by ∼10 Å occurred, and the iodine between the interlayers existed as triiodide ions (I3-) in an unsymmetrical fashion. The amount of intercalated iodide has been determined from thermogravimetric analysis. Electron microscopic analysis confirmed these systems' intercalation and subsequent lattice expansion. In the diffuse reflectance spectra, charge transfer from the triiodide ions to the host oxide was noticed, and it caused the absorption edge to fall beyond the visible region for the intercalated samples. XPS analysis of iodine intercalated Bi0.775Pr0.225O1.5 has shown the mixed valence states for Pr and the existence of I3- along with some IO3- species. The quasi-2D structure was stable during the thermal deintercalation process. The evaluation of iodine intercalated Bi0.775Ln0.225O1.5 (Ln = La, Pr, Nd, Sm, and Eu) samples as anode material in the lithium-ion battery system has given quite promising results, exhibiting fast Li+-ion diffusion, low charge transfer resistance, good reversible capacity, capacity retention (after cycling back to 10 mA g-1), and structural stability (after long cycles).

Framework Adaptability and Concerted Structural Response in a Bismuth Metal-Organic Framework Catalyst

Bismuth metal-organic frameworks (MOFs) as heterogeneous catalysts are scarce, and there is little knowledge on the influence of the MOF features on their resulting activity and behavior. Here, we present the synthesis, characterization, and catalytic activity in the one-pot multicomponent Strecker reaction with ketones of three new MOFs prepared with the combination of indium or bismuth and 4,4',4'',4'''-methanetetrayltetrabenzoic acid. One of them, denoted BiPF-7, is very robust and chemically stable, and demonstrates a high activity in the formation of the desired α-aminonitriles. The interaction of the catalytic substrates with the metal centers in this MOF has been crystallographically characterized, showcasing a concerted framework adaptability process that involves structural changes in framework components that are not directly involved in the binding of the guests.

Building a Green, Robust, and Efficient Bi-MOF Heterogeneous Catalyst for the Strecker Reaction of Ketones

In this work, we present the new [Bi₁₄(μ₃-O)₉(μ₄-O)₂(μ_3–OH)₅(3,5-DSB)₅(H₂O)₃]·7H₂O, BiPF-4 (bismuth polymeric framework—4) MOF, its microwave hydrothermal synthesis, as well as its behavior as a heterogeneous catalyst in the multicomponent organic Strecker reaction. The BiPF-4 material shows a three-dimensional (3D) framework formed by peculiar inorganic oxo-hydroxo-bismutate layers connected among them through the 3,5-dsb (3,5-disulfobenzoic acid) linker. These two-dimensional (2D) layers, built by junctions of Bi7 polyhedra SBU, provide the material of many Lewis acid catalytic sites because of the mixing in the metal coordination number. BiPF-4 is a highly robust, green, and stable material that demonstrates an excellent heterogeneous catalytic activity in the multicomponent Strecker reaction of ketones carried out in one-pot synthesis, bringing a reliable platform of novel green materials based on nontoxic and abundant metal sources such as bismuth.

In this work, we present the new [Bi₁₄(μ₃-O)₉(μ₄-O)₂(μ₃₋OH)₅(3,5-DSB)₅(H₂O)₃]·7H₂O, BiPF-4 (bismuth polymeric framework—4) MOF, its microwave hydrothermal synthesis, as well as its behavior as a heterogeneous catalyst in the multicomponent organic Strecker reaction.

A Novel Porous Ti-Squarate as Efficient Photocatalyst in the Overall Water Splitting Reaction under Simulated Sunlight Irradiation

A new porous titanium(IV) squarate metal-organic framework (MOF), denoted as IEF-11, having a never reported titanium secondary building unit, is successfully synthesized and fully characterized. IEF-11 not only exhibits a permanent porosity but also an outstanding chemical stability. Further, as a consequence of combining the photoactive Ti(IV) and the electroactive squarate, IEF-11 presents relevant optoelectronic properties, applied here to the photocatalytic overall water splitting reaction. Remarkably, IEF-11 as a photocatalyst is able to produce record H₂ amounts for MOF-based materials under simulated sunlight (up to 672 µmol g_catalyst in 22 h) without any activity loss during at least 10 d.

Polymeric Terbium(III) Squarate Hydrate as a Luminescent Magnet

Polymeric terbium(III) squarate hydrate [{Tb2(C4O4)3(H2O)8}n] was prepared from TbCl3 or Tb2O3 and squaric acid. The crystal structure was determined in a monoclinic Pc space group, and the whole molecular arrangement gives a sandwiched two-dimensional structure. The coordination polyhedra are described as a square antiprism. The solid complex emits green light under UV irradiation at room temperature with the quantum yield of 25%. Although Tb3+ is a non-Kramers ion, the alternating-current magnetic susceptibility showed frequency dependence in a 2000-Oe DC field, and the effective energy barrier for magnetization reorientation was 33(2) K. Thus, [{Tb2(C4O4)3(H2O)8}n] displayed functions of a potential luminescent magnet.

Bi(iii) MOFs: syntheses, structures and applications

The synthesis methods, structures and applications of Bi(iii)-based MOFs in catalysis, adsorption, fluorescence, etc. are reviewed.

Plasma-Induced Defects Enhance the Visible-Light Photocatalytic Activity of MIL-125(Ti)-NH2 for Overall Water Splitting

Defect engineering in metal-organic frameworks is commonly performed by using thermal or chemical treatments. Herein we report that oxygen plasma treatment generates structural defects on MIL-125(Ti)-NH₂ , leading to an increase in its photocatalytic activity. Characterization data indicate that plasma-treated materials retain most of their initial crystallinity, while exhibiting somewhat lower surface area and pore volume. XPS and FT-IR spectroscopy reveal that oxygen plasma induces MIL-125(Ti)-NH₂ partial terephthalate decarboxylation and an increase in the Ti-OH population. Thermogravimetric analyses confirm the generation of structural defects by oxygen plasma and allowed an estimation of the resulting experimental formula of the treated MIL-125(Ti)-NH₂ solids. SEM analyses show that oxygen plasma treatment of MIL-125(Ti)-NH₂ gradually decreases its particle size. Importantly, diffuse reflectance UV/Vis spectroscopy and valence band measurements demonstrate that oxygen plasma treatment alters the MIL-125(Ti)-NH₂ band gap and, more significantly, the alignment of highest occupied and lowest unoccupied crystal orbitals. An optimal oxygen plasma treatment to achieve the highest efficiency in water splitting with or without methanol as sacrificial electron donor under UV/Vis or simulated sunlight was determined. The optimized plasma-treated MIL-125(Ti)-NH₂ photocatalyst acts as a truly heterogeneous photocatalyst and retains most of its initial photoactivity and crystallinity upon reuse.