Highly Luminescent CsPbBr3@Cs4PbBr6 Nanocrystals and Their Application in Electroluminescent Emitters

Tunable Emissive CsPbBr3/Cs4PbBr6 Quantum Dots Engineered by Discrete Phase Transformation for Enhanced Photogating in Field-Effect Phototransistors

Precise control of quantum structures in hybrid nanocrystals requires advancements in scientific methodologies. Here, on the design of tunable CsPbBr3/Cs4PbBr6 quantum dots are reported by developing a unique discrete phase transformation approach in Cs4PbBr6 nanocrystals. Unlike conventional hybrid systems that emit solely in the green region, this current strategy produces adjustable luminescence in the blue (450 nm), cyan (480 nm), and green (510 nm) regions with high photoluminescence quantum yields up to 45%, 60%, and 85%, respectively. Concentration-dependent studies reveal that phase transformation mechanisms and the factors that drive CsBr removal occur at lower dilutions while the dissolution-recrystallization process dominates at higher dilutions. When the polymer-CsPbBr3/Cs4PbBr6 integrated into a field-effected transistor the resulting phototransistors featured enhanced photosensitivity exceeding 105, being the highest reported for an n-type phototransistor, while maintaining good transistor performances as compared to devices consisting of polymer-CsPbBr3 NCs.

Stable, Scalable, and Free-Standing Perovskite Quantum Dots Composite Reinforced by Cellulose Fibers

Perovskite quantum dots (PQDs) have attracted emerging attention as fluorescent and light-absorbing materials for next-generation optoelectronics due to their outstanding properties and cost-efficiency. However, PQD thin film suffers significant instability due to structure and material failures, which hinders their application in flexible and reliable PQD-based advanced wearable devices. Herein, we use commercial cellulose fiber-based filter paper as a substrate to synthesize PQDs in situ and fabricate PQD-paper free-standing flexible composite film. The abundant hydroxy capping ligands of cellulose fibers and the unique dense network structure of the filter paper can facilitate confined crystallization, forming strong interactions between the PQDs and substrate, the unpackaged PQD composite film showed extraordinary stability (>30 days) in the air with high humidity (90%). Meanwhile, the strong interaction between PQDs and paper enables an ultrasimple drop-cast synthesis process with excellent process tolerance, making it customizable and easy to scale up (10 cm in diameter). Due to the uniformly dispersed PQDs on cellulose fibers of the substrate, the composite demonstrates impressive photo-responsive properties. Photodetector (PD) arrays were designed on free-standing PQD paper and flexible graphitic electrodes, and circuits were fabricated by drawing. The PD arrays can work as optical and electrical dual-mode image sensors with incredible bending robustness, enduring up to 100,000 cycles at 180°.

InCl3-Assisted Surface Defects Restoring to Enhance Lead-Free Cs2ZrCl6 Nanocrystals for X-Ray Imaging and Blue LED Applications

As one type of recent emerging lead-free perovskites, Cs2ZrCl6 nanocrystals are widely concerned, benefiting from the eminent designability, high X-ray cutoff efficiency, and favorable stability. Improving the luminescence performance of Cs2ZrCl6 nanocrystals has great importance to cater for practical applications. In view of the surface defects frequently formed by the liquid phase method, the particle morphology and surface quality of this material are expected to be regulated if certain intervention is made in the synthesis process. In the work, differing from normal cell lattice modulation based on the ion doping, the grain size and surface morphology of Cs2ZrCl6 nanocrystals are optimized via adding a certain amount of InCl3 to the synthetic solution. The surface defects are restored to inhibit the defect-induced non-radiative transition, resulting in the improvement of the luminescence properties. Moreover, a flexible Cs2ZrCl6@polydimethylsiloxane film with excellent heat, water, and bending resistance and a light-emitting diode (LED) device are fabricated, exhibiting excellent application potential for X-ray imaging and blue LED.

High-Pressure Structural and Optical Studies of Pure Low-Dimensional Cesium Lead Chlorides CsPb2Cl5 and Cs4PbCl6

We report high-pressure single-crystal X-ray diffraction, optical absorption, and photoluminescence investigations of all-inorganic perovskite-related materials CsPb2Cl5 and Cs4PbCl6. The crystal structure of CsPb2Cl5, composed of alternate layers of Cs+ cations and Pb-Cl frameworks, is stable under pressure up to at least 4.2 GPa. Because external stress is mainly absorbed by the Cs+ layers, the optical absorption edge of the crystal only slightly red-shifts with increasing pressure, which correlates well with a moderate shortening of the Pb-Cl bonds. A quite different response to pressure shows Cs4PbCl6, the crystal built of isolated PbCl64- octahedra and Cs+ cations. During the compression at around 3.4 GPa, the trigonal phase I, space group R3̅c, transforms to the orthorhombic phase II, space group Cmce, which at around 4 GPa transforms into phase III. On decompression, phase II is not restored, but phase III converts through a diffuse phase transition into another high-pressure phase IV, which is stable in a wide pressure range and transforms to the initial phase I only around atmospheric pressure. The red shift of the absorption edge and the profound modification of the absorption spectrum in phase II were ascribed to the deformation of the PbCl64- octahedra. The transition to phase III induces a blue shift of the absorption edge, while the transition to phase IV is associated with a large red shift. Photoluminescence was detected in phases I and II with the intensity quenched with increasing pressure.

CsBr-Triggered Reversible Phase Transition of Perovskite Nanocrystals for Advanced Information Encryption and Decryption

Luminescent perovskite nanocrystals (NCs), possessing the advantages of low cost, easy detection, and excellent luminescence, are becoming more and more significant in the fields of information encryption and decryption. Most hydrochromic perovskite NCs for information encryption have moderate reversibility and are easily passively decrypted by water in the moist air, limiting their practical applications. Herein, a lyochromic material is synthesized based on reversible phase transition between luminescent CsPbBr3-HBr (pretreating CsPbBr3 with HBr) and nonluminescent Cs4PbBr6, exhibiting excellent reversibility in 50 cycles triggered by CsBr solution. HBr treatment boosts the ion migration of NCs via diminishing surface ligands and passivating Br vacancy, assisting CsBr concentration acting as a crucial factor in dynamic ion exchange equilibrium between the trigger solution and CsPbBr3-HBr. By utilizing CsPbBr3-HBr as a safety ink, the CsBr-triggered photoluminescence switch has been demonstrated to be reproducible, stable, and reliable for information encryption and decryption.

APTES and CTAB Synergistic Induce a Heterozygous CsPbBr3/Cs4PbBr6 Perovskite Composite and its Application on the Sensitive Fluorescent Detection of Iodide ions

Recently, all-inorganic halide perovskite quantum dots (IPQD) as a new fluorescent material with excellent fluorescence properties have attracted wide attention. However, their instability in polar solvents is the main factor hindering their application in analysis. Herein, a heterozygous perovskite (CsPbBr3/Cs4PbBr6) was simultaneously prepared and stabilized by a silylanization strategy using (3-aminopropyl)-triethoxysilane (APTES) and cetyltrimethyl ammonium bromide (CTAB) assisted precipitation encapsulation method. The synthesized CsPbBr3/Cs4PbBr6 emitted an independent fluorescence at 520 nm. The obtained CsPbBr3/Cs4PbBr6 exhibited good stability in ethanol/water mixtures. It was used as a fluorescent probe for sensitively detecting iodide ions (I-) by fluorescence quenching mechanism in the concentration range of 1 ~ 70.0 µM with the detection limit (LOD) of 0.83 µM (relative standard deviation (RSD) = 1.33%, n = 20). The simplicity and high selectivity of the proposed fluorescent analysis method were the prominent features. This work could be extended to the other target ion detection by a perovskite fluorescent quenching.

Ultra-Stable and Highly Efficient White Light Emitting Diodes through CsPbBr3 Perovskite Nanocrystals-Silica Composite Phosphor Functionalized with Surface Phenyl Molecules

Poor stability of CsPbBr₃ perovskite nanocrystals (NCs) to moisture/heat/light has significantly limited their application as a green phosphor, despite their outstanding luminescent properties. Here, a remarkably stable CsPbBr₃ NCs-silica composite phosphor functionalized with surface phenyl molecules (CsPbBr₃ -SiO₂ ^Ph ) is synthesized by controlling low-temperature hydrolysis and condensation reaction of perhydropolysilazane in the presence of CsPbBr₃ NCs followed by phenyl-functionalization. Through the process, CsPbBr₃ NCs are confined in a compact silica matrix, which is impermeable to H₂ O. The synthesis strategy is extended to a classical red quantum dot, CdZnSeS@ZnS NCs, to fabricate a white light emitting diode (WLED) consisting of CsPbBr₃ -SiO₂ ^Ph and CdZnSeS@ZnS-SiO₂ ^Ph phosphor and silicone resin packaged on a commercial blue InGaN chip with luminous efficacy (LE) of 9.36 lm W^-1 . The WLED undergoes enhancements in both green and red photoluminescence over time to achieve a highly efficient performance of 38.80 lm W^-1 . More importantly, the WLED exhibits unprecedented operational stability of LE/LE₀  = 94% after 101 h-operation at 20 mA (2.56 V). The ultra-high operational stability and efficient performance are mainly attributed to thermal curing and aging through which grain growth occurs as well as deactivation of defect states by permeated atmospheric O₂ .

Highly Stable and Photoluminescent CsPbBr3/Cs4PbBr6 Composites for White-Light-Emitting Diodes and Visible Light Communication

Inorganic lead halide perovskite is one of the most excellent fluorescent materials, and it plays an essential role in high-definition display and visible light communication (VLC). Its photochromic properties and stability determine the final performance of light-emitting devices. However, efficiently synthesizing perovskite with high quality and stability remains a significant challenge. Here, we develop a facile and environmentally friendly method for preparing high-stability and strong-emission CsPbBr₃/Cs₄PbBr₆ composites using ultrasonication and liquid paraffin. Tuning the contents of liquid paraffin, bright-emission CsPbBr₃/Cs₄PbBr₆ composite powders with a maximum PLQY of 74% were achieved. Thanks to the protection of the Cs₄PbBr₆ matrix and liquid paraffin, the photostability, thermostability, and polar solvent stability of CsPbBr₃/Cs₄PbBr₆-LP are significantly improved compared to CsPbBr₃ quantum dots and CsPbBr₃/Cs₄PbBr₆ composites that were prepared without liquid paraffin. Moreover, the fabricated CsPbBr₃/Cs₄PbBr₆-LP-based WLEDs show excellent luminescent performance with a power efficiency of 129.5 lm/W and a wide color gamut, with 121% of the NTSC and 94% of the Rec. 2020, demonstrating a promising candidate for displays. In addition, the CsPbBr₃/Cs₄PbBr₆-LP-based WLEDs were also demonstrated in a VLC system. The results suggested the great potential of these high-performance WLEDs as an excitation light source to achieve VLC.

Highly efficient silica coated perovskite nanocrystals with the assistance of ionic liquids for warm white LEDs

Given the inherent characteristics of defect-tolerant, tunable emission performance, and high extinction coefficient, lead halide perovskite nanocrystals (NCs) have attracted widespread attention as a promising material in optoelectronic fields. However, their poor structural stability greatly impedes their practical applications. Herein, a novel strategy for synthesizing stable CsPbBr₃@SiO₂ NCs via the hydrolytic polycondensation of (3-aminopropyl)triethoxysilane (APTES) in the presence of ionic liquids (ILs) is deliberately designed. The problems of fluorescence quenching and undesirable agglomeration of NCs resulting from ligand loss and surface erosion existing in common encapsulation methods can be effectively resolved. The fast and controllable growth of the SiO₂ shell around the CsPbBr₃ NCs is realized owing to the high polarity and hygroscopicity of the IL. Moreover, the dual effects of the IL for passivating the surface defects and avoiding the structural degradation of NCs during the hydrolysis process of APTES are demonstrated. As a result, CsPbBr₃@SiO₂ NCs with a high photoluminescence quantum yield of 85.7% and excellent stability are realized. Furthermore, this method proves to be a versatile tool to obtain CsPbX₃@SiO₂ NCs with different halide compositions, realizing a broad tunable wavelength from 421.2 nm to 651.6 nm. A warm white LED with a high color rending index was assembled through packaging CsPbBr₃@SiO₂ NCs and Cu-In-Zn-S/ZnS/PVP composites on a commercial blue chip. These findings are expected to facilitate the development of perovskite NCs, which provides access to their optoelectronic applications.

Highly emissive green CsPbBr3/Cs4PbBr6 composites: formation kinetics, excellent heat, light, and polar solvent resistance, and flexible light-emitting application

Benefit from their near-unity photoluminescence quantum yield (PL QY), narrow emission band, and widely tunable bandgap, metal halide perovskites have shown promising in light-emitting applications. Despite such promise, how to facile, environmentally-friendly, and large-scale prepare solid metal halide perovskite with high emission and stability remains a challenging. Herein, we demonstrate a convenient and environmentally-friendly method for the mass synthesis of solid CsPbBr₃/Cs₄PbBr₆ composites using high-power ultrasonication. Adjusting key experimental parameters, bright emitting CsPbBr₃/Cs₄PbBr₆ solids with a maximum PL QY of 71% were obtained within 30 min. XRD, SEM, TEM, Abs/PL, XPS, and lifetime characterizations provide solid evidence for forming CsPbBr₃/Cs₄PbBr₆ composites. Taking advantage of these composites, the photostability, thermostability, and polar solvent stability of CsPbBr₃/Cs₄PbBr₆ are much improved compared to CsPbBr₃. We further demonstrated CsPbBr₃/Cs₄PbBr₆ use in flexible/stretchable film and high-power WLEDs. After being subjected to bending, folding, and twisting, the film retains its bright emission and exhibits good resistance to mechanical deformation. Additionally, our WLEDs display a superior, durable high-power-driving capability, operating currents up to 300 mA and maintaining high luminous intensity for 50 hours. Such highly emissive and stable metal halide perovskites make them promising for solid-state lighting, lasing, and flexible/stretchable display device applications.

Stable and Bright Electroluminescent Devices utilizing Emissive 0D Perovskite Nanocrystals Incorporated in a 3D CsPbBr3 Matrix

The 0D cesium lead halide perovskite Cs₄ PbBr₆ has drawn remarkable interest due to its highly efficient robust green emission compared to its 3D CsPbBr₃ counterpart. However, seizing the advantages of the superior photoluminescence properties for practical light-emitting devices remains elusive. To date, Cs₄ PbBr₆ has been employed only as a higher-bandgap nonluminescent matrix to passivate or provide quantum/dielectric confinement to CsPbBr₃ in light-emitting devices and to enhance its photo-/thermal/environmental stability. To resolve this disparity, a novel solvent engineering method to incorporate highly luminescent 0D Cs₄ PbBr₆ nanocrystals (perovskite nanocrystals (PNCs)) into a 3D CsPbBr₃ film, forming the active emissive layer in single-layer perovskite light-emitting electrochemical cells (PeLECs) is designed. A dramatic increase of the maximum external quantum efficiency and luminance from 2.7% and 6050 cd m^-2 for a 3D-only PeLEC to 8.3% and 11 200 cd m^-2 for a 3D-0D PNC device with only 7% by weight of 0D PNCs is observed. The majority of this increase is driven by the efficient inherent emission of the 0D PNCs, while the concomitant morphology improvement also contributes to reduced leakage current, reduced hysteresis, and enhanced operational lifetime (half-life of 129 h), making this one of the best-performing LECs reported to date.

0D Perovskites: Unique Properties, Synthesis, and Their Applications

0D perovskites have gained much attention in recent years due to their fascinating properties derived from their peculiar structure with isolated metal halide octahedra or metal halide clusters. However, the systematic discussion on the crystal and electronic structure of 0D perovskites to further understand their photophysical characteristics and the comprehensive overview of 0D perovskites for their further applications are still lacking. In this review, the unique crystal and electronic structure of 0D perovskites and their diverse properties are comprehensively analyzed, including large bandgaps, high exciton binding energy, and largely Stokes-shifted broadband emissions from self-trapped excitons. Furthermore, the photoluminescence regulation are discussed. Then, the various synthetic methods for 0D perovskite single crystals, nanocrystals, and thin films are comprehensively summarized. Finally, the emerging applications of 0D perovskites to light-emitting diodes, solar cells, detectors, and some others are illustrated, and the outlook on future research in the field is also provided.

Erasable Cs4PbBr6 quantum dots glass with switchable photoluminescence

Encapsulating quantum dots (QDs) into a transparent glass matrix can not only increase their stability but also explore new luminescence properties. Herein, erasable Cs₄PbBr₆ QDs with switchable photoluminescence are successfully obtained by a heat-treatment method in a borosilicate glass matrix. First, QDs can self-crystalize in borosilicate glass without the heat treatment. Second, it is found that when the QDs glass is heat treated below T_g, QDs can be destroyed. Further, when the QDs glass is reheat treated above T_g, atom rearrangement can occur and QDs can reprecipitate in the glass matrix. Consequently, the switchable photoluminescence of QDs can be achieved. The special erasable QDs glass and switchable photoluminescence in this work can resolve the technological challenge of recovering the luminescence performance of QDs after they have been destroyed.

Efficient Energy Transfer in Te4+-Doped Cs2ZrCl6 Vacancy-Ordered Perovskites and Ultrahigh Moisture Stability via A-Site Rb-Alloying Strategy

As an effective method to improve the optical properties and stability of perovskite matrix, doped halide perovskites have attracted extensive attention in the field of optoelectronic applications. Herein, a series of all inorganic lead-free Te⁴⁺-doped Cs₂ZrCl₆ vacancy-ordered perovskites were successfully synthesized with different Te-doping concentrations by a solvothermal method, and deliberate Te⁴⁺-doping results in green-yellow triplet self-trapped exciton (STE) emission with a high photoluminescence quantum yield (PLQY) of 49.0%. The efficient energy transfer was observed from singlet to triplet emission. Further, the effects of A-site Rb alloying on the optical properties and stability were investigated. We found that A-site Rb alloying and C-site cohalogenation did not change the luminescence properties of Te⁴⁺, but the addition of a small amount of Rb⁺ can improve the PL intensity and moisture stability. Our results provide physical insights into the nS² Te⁴⁺-ion-doping-induced emissive mechanism and shed light on improving the environmental stability for further applications.