Enhanced Adsorption of Aqueous Tetracycline Hydrochloride on Renewable Porous Clay-Carbon Adsorbent Derived from Spent Bleaching Earth via Pyrolysis

Facile Fabrication of Zeolitic Imidazolate Framework-8@Regenerated Cellulose Nanofibrous Membranes for Effective Adsorption of Tetracycline Hydrochloride

The excessive utilization of antimicrobials in humans and animals has resulted in considerable environmental contamination, necessitating the development of high-performance antibiotic adsorption media. A significant challenge is the development of composite nanofibrous materials that are both beneficial and easy to fabricate, with the aim of improving adsorption capacity. Herein, a new kind of zeolitic imidazolate framework-8 (ZIF-8)-modified regenerated cellulose nanofibrous membrane (ZIF-8@RC NFM) was designed and fabricated by combining electrospinning and in situ surface modification technologies. Benefiting from its favorable surface wettability, enhanced tensile strength, interconnected porous structure, and relatively large specific surface area, the resulting ZIF-8@RC NFMs exhibit a relatively high adsorption capacity for tetracycline hydrochloride (TCH) of 105 mg g-1 within 3 h. Moreover, a Langmuir isotherm model and a pseudo-second-order model have been demonstrated to be more appropriate for the description of the TCH adsorption process of ZIF-8@RC-3 NFMs. Additionally, this composite fibrous material could keep a relatively stable adsorption capability under various ionic strengths. The successful fabrication of the novel ZIF-8@RC NFMs may shed light on the further development of wastewater adsorption treatment materials.

Facile fabrication of Eu-based metal-organic frameworks for highly efficient capture of tetracycline hydrochloride from aqueous solutions

The tetracycline hydrochloride (TCH) removal from wastewater is important for the environment and human health yet challenging. Herein, the Eu-based MOF, Eu(BTC) (BTC represents 1,3,5-trimesic acid) was prepared by an efficient and environmental-friendly strategy, and then was used for the TCH capture for the first time. The Eu(BTC) was characterized by different methods such as X-ray diffraction, scanning electron microscopy and Fourier-transform infrared spectroscopy. The TCH uptake of Eu(BTC) was investigated systematically. The influences of experiment conditions such as solution pH value, adsorption time and initial concentration on TCH capacity of Eu(BTC) were also studied. The Eu(BTC) obtained exhibited remarkable TCH uptake (q_m was up to 397.65 mg/g), which was much higher than those of most materials such as UiO-66/PDA/BC (184.30 mg/g), PDA-NFsM (161.30 mg/g) and many carbon-based materials reported till now. Besides, the TCH adsorption behavior on Eu(BTC) was explored by Freundlich and Langmuir equations, and the adsorption mechanism was further analyzed. The experimental results suggested that the TCH adsorption mechanism of Eu(BTC) included the π-π interaction, electrostatic interaction and coordinate bonds. The excellent TCH adsorption performance and the efficient fabrication strategy make the Eu(BTC) prepared promising in TCH removal.

Removal of Ciprofloxacin from Water by a Potassium Carbonate-Activated Sycamore Floc-Based Carbonaceous Adsorbent: Adsorption Behavior and Mechanism

In this study, a porous carbonaceous adsorbent was prepared from sycamore flocs by pyrolysis method and K₂CO₃ activation. The effects of preparative conditions of the material on its adsorptive property were explored. The optimal material (SFB_2-900) was obtained with a K₂CO₃/biochar mass ratio of 2:1 at an activation temperature of 900 °C, possessing a huge surface specific area (1651.27 m²/g). The largest adsorption capacity for ciprofloxacin on SFB_2-900 was up to 430.25 mg/g. The adsorption behavior was well described by the pseudo-second-order kinetic model and the Langmuir isothermal model. Meanwhile, this process was spontaneous and exothermic. The obtained material showed excellent adsorption performance in the conditions of diverse pH range, ionic strength, and water quality of the solution. The optimum adsorption conditions (pH = 7.01, dosage = 0.6 g/L, and C₀ = 52.94 mg/L) determined based on the response surface methodology were in accordance with the practical validation consequences. The good regeneration effect of SFB_2-900 manifested that this material had great practical application potential. Combining the experimental results and density functional theory calculation results, the adsorption mechanisms mainly included pore filling, π-π EDA interactions, electrostatic interactions, and H-bonds. The material could be regarded as a novel and high-efficiency adsorbent for antibiotics. Additionally, these findings also provide reference for the reuse of waste biomass in water treatment.

Mechanistic insights into the removal of As(III) and As(V) by iron modified carbon based materials with the aid of machine learning

The machine learning (ML) technique was used to examine the effects of different microscopic material features on the ability of iron modified carbon-based materials (Fe-CBMs) to remove As(V) and As(III). The findings showed that specific CBMs and Fe-CBMs features (such as surface functionality) from sophisticated microscopic and spectroscopic techniques led to models that were more accurate than those constructed using more basic information, such as bulk elemental composition and surface area (the root-mean-square error fell by 44.7% for As(V) and 56.9% for As(III), respectively). The high non-polar carbon (NPC) content of CBMs and Fe-CBMs had a detrimental influence on As(V) and As(III) removal capability, whereas surface oxygen-containing functional groups (SOFGs) contents on CBMs and Fe-CBMs played an essential role in arsenic removal based on ML approaches. The relative importance of CO was greater by 77.8% and 40.6% than that of C-O on the elimination of As(V) and As(III), respectively. The accurate ML models are helpful for the future design of Fe-CBMs and the relative importance and partial dependence plot analysis can direct the use of Fe-CBMs for arsenic removal in a sensible manner under different application situations.

Pyrolysis temperature affects the physiochemical characteristics of lanthanum-modified biochar derived from orange peels: Insights into the mechanisms of tetracycline adsorption by spectroscopic analysis and theoretical calculations

Biochar (BC) derived from orange peels was modified using LaCl₃ to enhance its tetracycline (TC) adsorption capacity. SEM-EDS, FT-IR, XRD, and BET were used to characterize the physiochemical characteristics of La-modified biochar (La-BC). Batch experiments were conducted to investigate the effects of several variables like pyrolysis temperature, adsorbent dosage, initial pH, and coexisting ions on the adsorption of TC by La-BC. XPS and density functional theory (DFT) were used to elucidate the TC adsorption mechanism of La-BC. The results demonstrated that La was uniformly coated on the surface of the La-BC. The physiochemical characteristics of La-BC highly depended on pyrolysis temperature. Higher temperature increased the specific surface area and functional groups of La-BC, thus enhancing its TC adsorption capacity. La-BC prepared at 700 °C (BC@La-700) achieved the maximum adsorption capacity of 143.20 mg/g, which was 6.8 and 4.6 times higher than that of BC@La-500 and BC@La-600, respectively. The mechanisms of TC adsorption by La-BC were most accurately described by the pseudo-second-order kinetic model. Furthermore, the adsorption isotherm of La-BC was consistent with the Freundlich model. BC@La-700 achieved good TC adsorption efficiencies even at a wide pH range (pH 4-10). Humic acid significantly inhibited TC adsorption by La-BC. The presence of coexisting ions (NH₄⁺, Ca²⁺, NO₃^-) did not significantly affect the adsorption capacity of La-BC, particularly BC@La-700. Moreover, BC@La-700 also exhibited the best recycling performance, which achieved relative high adsorption capacity even after 5 cycles. The XPS results showed that π-π bonds, oxygen-containing functional groups, and La played a major role in the adsorption of TC on La-BC. The result of DFT showed that the adsorption energy of La-BC was the greatest than that of other functional groups on biochar. Collectively, our findings provide a theoretical basis for the development of La-BC based materials to remove TC from wastewater.

The Potential of Spent Coffee Grounds @ MOFs Composite Catalyst in Efficient Activation of PMS to Remove the Tetracycline Hydrochloride from an Aqueous Solution

The efficient removal of Tetracycline Hydrochloride (TC) from wastewater, which is a difficult process, has attracted increasing attention. Aiming to synchronously achieve the goal of natural waste utilization and PMS activation, we have combined the MOFs material with waste coffee grounds (CG). The catalytic activity of the CG@ZIF-67 composite in the TC removal process was thoroughly evaluated, demonstrating that the TC removal rate could reach 96.3% within 30 min at CG@ZIF-67 composite dosage of 100 mg/L, PMS concertation of 1.0 mM, unadjusted pH 6.2, and contact temperate of 293.15 K. The ¹O₂ and ·SO₄^- in the CG@ZIF-67/PMS/TC system would play the crucial role in the TC degradation process, with ¹O₂ acting as the primary ROS. The oxygen-containing functional groups and graphite N on the surface of CG@ZIF-67 composite would play a major role in efficiently activating PMS and correspondingly degrading TC. In addition, the CG@ZIF-67/PMS/TC system could withstand a wide pH range (3-11). The application of CG in preparing MOF-based composites will provide a new method of removing emerging pollutants from an aqueous solution.

Hydrolytically stable mixed ditopic linker based zirconium metal organic framework as a robust photocatalyst towards Tetracycline Hydrochloride degradation and hydrogen evolution

In the existing eco-crisis, designing and engineering an efficient as well as water stable photocatalyst for energy conversion and pollutant abatement remains crucial. In this regard, a mixed linker type zirconium metal organic framework (Zr-MOF) with terepthalic acid based ditopic linkers were utilized to design a single component photocatalyst through single step solvothermal method to utilize photons from visible light illumination towards hydrogen energy (H2) production and Tetracycline Hydrochloride (TCH) degradation. The one pot synthesized mixed linker based Zr-MOF displays visible light absorption through band gap tuning, superior exciton segregation and oxygen vacancy that cumulatively supports the enhancement in the photocatalytic output with respect to their pristine counterparts. Additionally, the X-ray photoelectron spectroscopy, optical and electrochemical studies strongly reinforces the above claims. The prepared mixed linker Zr-MOF showed superior photocatalytic H2 evolution performance of 247.88 µmol h-1 (apparent conversion efficiency; ACE = 1.9%) that is twice than its pristine Zr-MOFs. Moreover, in TCH degradation, the mixed linker MOF displays an enhanced efficacy of 91.8 % and adopts pseudo-first order type kinetics with a rate constant value of 0.032. Typically, the active species participating for the TCH photo-degradation follows the order of hydroxyl (OH.) < superoxide (O2.-) radicals. Consequently, the mixed linker Zr-MOF could be effectively used as a robust photocatalyst exhibiting boosted TCH degradation and H2 production.

Performance of lignin impregnated biochar on tetracycline hydrochloride adsorption: Governing factors and mechanisms

Corn stalk-based and wheat straw-based biochar were modified by lignin impregnation and applied to adsorb tetracycline hydrochloride (TCH) in wastewater. Porous properties of lignin impregnated biochar were improved and showed better adsorption performance for TCH. Lignin impregnated wheat straw biochar (WS-L) had the maximum adsorption capacity of 31.48 mg/g, which was 1.89 times compared to corresponding pristine biochar, because excellent pore structure developed via the lignin impregnation and carbonization. The adsorption behavior of TCH molecules on biochar could be interpreted well by two-step process, and it postulated to be a physical adsorption process based on pore filling, hydrogen bonding, π-π interaction, and electrostatic interactions. And cations including Na⁺, K⁺, Mg²⁺ and Al³⁺ could compete with TCH for adsorption, while Ca²⁺ could promote TCH adsorption by forming tetracycline-Ca²⁺ complexes. Maximum TCH adsorption occurred at pH of 7. The best performing lignin impregnated biochar was WS-L that demonstrated the biochar modulated by lignin had the potential to remove antibiotics from aqueous solutions.

A comparative study on adsorption and catalytic degradation of tetracycline by five magnetic mineral functional materials prepared from steel pickling waste liquor

Palygorskite (Pal), bentonite (Bent), sepiolite (Sep), zeolite (Zeol), and kaolin (Kaol) were used with steel pickling waste liquor to synthesize magnetic palygorskite (Pal@Fe₃O₄), magnetic bentonite (Bent@Fe₃O₄), magnetic sepiolite (Sep@Fe₃O₄), magnetic zeolite (Zeol@Fe₃O₄), and magnetic kaolin (Kaol@Fe₃O₄), for adsorption and catalytic degradation of tetracycline (TC), respectively. Through the study of adsorption kinetics and adsorption isotherms, the maximum adsorption capacity of Pal@Fe₃O₄ to TC was 149.439 mg/g, which was 1.239 times, 2.260 times, 3.161 times, and 3.448 times of Bent@Fe₃O₄, Zeol@Fe₃O₄, Kaol@Fe₃O₄, and Sep@Fe₃O₄, respectively. The kinetic study of tetracycline degradation demonstrated that the maximum reaction rate constant of Bent@Fe₃O₄/H₂O₂ system was K_(obs) = 2.12 × 10^-2 min^-1, which was close to that of Pal@Fe₃O₄/H₂O₂, Kaol@Fe₃O₄/H₂O₂ system, and was 2.000 times, 2.356 times, 2.650 times, and 4.711 times of Fe₃O₄/H₂O₂, Zeol@Fe₃O₄/H₂O₂, Sep@Fe₃O₄/H₂O₂, and H₂O₂ system, respectively. The results showed that Pal@Fe₃O₄ and Bent@Fe₃O₄ were more advantageous in the treatment of wastewater containing tetracycline, and efficient reuse of exhausted magnetic minerals and deep mineralization of organic pollutants were achieved by constructing an advanced oxidation system. The BET, VSM, SEM, XPS, XRD, and FTIR were used to characterize the five clay minerals before and after magnetic modification. It was speculated that the surface structure - OH groups of clay minerals might be significant factors influencing the adsorption performance of magnetic minerals on TC, and reduction ability of clay minerals to Fe³⁺ importantly affected the catalytic performance of magnetic minerals. The specific surface area and morphological structure of clay minerals both affected the adsorption and catalytic degradation of TC by the five magnetic minerals.

Adsorption of tetracycline and Cd(II) on polystyrene and polyethylene terephthalate microplastics with ultraviolet and hydrogen peroxide aging treatment

Microplastics (MPs) could serve as vectors of antibiotics and heavy metals through sorption and desorption. However, the combined adsorption process of antibiotics and heavy metals on aged MPs has rarely been studied. In this study, combined adsorption/desorption of tetracycline (TC) and Cd(II) on/from polystyrene (PS) and polyethylene terephthalate (PET) MPs, as well as ultraviolet (UV) and H₂O₂ aged MPs, was investigated. The specific surface areas of the MPs increased after UV and H₂O₂ aging. Adsorption experiments showed that the pseudo-second-order kinetic model and Freundlich model fitted adsorption of TC and Cd(II) on all of the MPs. The adsorption capacities of TC and Cd(II) were higher on aged MPs than on the pristine MPs, especially on H₂O₂ treated MPs. TC adsorption on the MPs was hardly affected by Cd(II), and Cd(II) adsorption was not significantly affected by TC when the solution pH value was below 8.0. Cd(II) slightly enhanced TC adsorption on the MPs at pH 8.0, especially on the aged MPs. The TC adsorption capacities increased with increasing pH, reaching a maximum at pH 5.0 or 6.0, and they then decreased, while the largest level of Cd(II) adsorption was at approximately pH 6.0. Adsorption of TC and Cd(II) on the pristine and aged MPs was thermodynamically favorable and spontaneous. The trend of the desorption rates of TC and Cd(II) from the MPs in different background solutions was ultrapure water < surface water < simulated gastric fluid. The desorption rates of TC and Cd(II) from the aged MPs were lower than those from the pristine MPs. The results revealed the mechanism of the TC and Cd(II) combined adsorption process on aged MPs, which will provide insight for understanding the aging process and its potential effects on sorption and desorption of antibiotics and heavy metals in the real environment.

Adsorption performance of GO-doped activated ATP composites towards tetracycline

Antibiotic-related environmental contamination directly threatens ecosystems and human health. Adsorption is an efficient and simple treatment process for removing antibiotics from water environments. Attapulgite (ATP) is a natural clay mineral extensively researched as a promising adsorbent material in the food industry, pharmaceutical sanitation, and organic wastewater treatment. Graphene oxide (GO) is widely employed in the treatment of organic wastewater due to its superior physicochemical properties. Here, using high temperature and HCl, ATP was activated (a-ATP), and a GO/a-ATP composite was prepared via hydrothermal synthesis. Using an adsorbent dosage of 0.75 g L-1, pH = 5, reaction time of 120 min, initial temperature = 35 °C, and initial TC concentration of 50 mg L-1, the adsorption capacity of GO/a-ATP for TC was 38.8 mg g-1. The pseudo-first-order model (PFO) and pseudo-second-order (PSO) model were fitted to the kinetic data, and yielded an R 2-value of PSO (0.99991) > PFO (0.9389), indicating that the adsorption process is related to chemisorption. Adsorption was also well described by the mixed-order (MO) model (R 2 = 0.9827), demonstrating that two rate-limiting adsorption reaction steps, diffusion and adsorption, occur; the former exerting greater influence. Equilibrium data was fitted to Langmuir, Freundlich, and Temkin isotherm models; the Langmuir model gave the best fit, suggesting the adsorption process is a homogeneous and monolayer adsorption process. Various thermodynamic parameters such as standard Gibbs free energy (ΔG 0) and standard enthalpy (ΔH 0) were also calculated, these results indicate the adsorption reaction is an endothermic process. Our study shows that GO/a-ATP is a promising adsorbent material for use in the adsorption of tetracycline in aquatic environments.

Synergistic adsorption and degradation of diclofenac by zero-valent iron modified spent bleaching earth carbon: Mechanism and toxicity assessment

Diclofenac (DCF) is a drug compound that exists widely in water bodies, which may pose a threat to the ecological environment. In this study, spent bleaching earth (SBE) was pyrolyzed, modified with cetyltrimethylammonium bromide (CTAB) and loaded with zero-valent iron (nZVI) to obtain CTAB-SBE@C-nZVI. The effects of CTAB concentration, Fe⁰ loading, CTAB-SBE@C-nZVI dosage, and initial pH value on the removal efficiency of DCF were studied. The results showed that the DCF removal efficiency could reach a maximum of 87.0% with 2.0 g/L dosage of the optimal material, which was prepared under the conditions of 30 mmol/L CTAB concentration, 25% Fe⁰ loading, and initial pH 5. It indicated that the strong adsorption of the material and the reduction effect of nZVI can achieve high-efficiency removal of DCF. Based on the detected reaction intermediate products, four possible degradation paths were inferred. The toxicity assessment of DCF and its intermediates manifested that the degradation of DCF by CTAB-SBE@C-nZVI was a process of gradual dechlorination and toxicity reduction. CTAB-SBE@C-nZVI displayed excellent DCF removal efficiency, good stability and environmental friendliness, achieving wastes treat wastes and exhibiting good prospects.

Electrospun flexible core-sheath PAN/PU/β-CD@Ag nanofiber membrane decorated with ZnO: enhance the practical ability of semiconductor photocatalyst

It is necessary to effectively separate photocatalytic materials from water bodies and reuse catalysts for industrial wastewater treatment. Herein, a novel nanofiber membrane with enhanced light absorption and reusability of photocatalytic materials was prepared. The three-dimensional porous structure of the nanofibers helps the photocatalyst efficiently degrade pollutants. Specifically, a high-efficiency photocatalyst carrier with a nanofiber structure (PAN/PU/β-CD@Ag nanofiber membrane) was prepared by electrospinning and a simple silver plating process, and then ZnO NPs were synthesized in situ on the nanofiber membrane during the hydrothermal process. Under visible-light irradiation, the ZnO-loaded PAN/PU/β-CD@Ag nanofiber membranes exhibited excellent photocatalytic performance for the degradation of methylene blue (MB, 71.5%) and tetracycline hydrochloride (TCH, 70.5%). Additionally, a possible pathway of charge migration in this system was proposed. This design may provide a new idea for the preparation of visible-light photocatalytic nanofiber membranes and their treatments of wastewater containing dyes and hormones.

Chemical Vapor Deposition Growth of MoS2 on g-C3N4 Nanosheets for Efficient Removal of Tetracycline Hydrochloride

MoS₂ was vertically grown on g-C₃N₄ nanosheets by chemical vapor deposition to prepare nanocomposites named MS-CN samples. Because of a large-surface area of 545.2 m²·g^-1 and a total pore volume of 1.7 cm³·g^-1, the sample MS-CN revealed fast and large adsorption capacity for tetracycline hydrochloride (TCH). The adsorption kinetics model proved that TCH could be rapidly adsorbed within 5 min, and chemical adsorption was dominant. For single-component adsorption of TCH, the maximum adsorption capacity was ∼154 mg/g. The monolayer adsorption was carried out on the surface of MS-CN. Both of the film and intra-particle diffusion were considered as significant processes to facilitate adsorption. Thermodynamic parameters indicate that the adsorption of TCH is a spontaneous endothermic process. The adsorption of TCH was highly pH-dependent. The maximum adsorption capacity of TCH was obtained in the case of pH ∼ 7. After four adsorption and desorption cycles, MS-CN still maintained well-adsorption performance. Multiple adsorption mechanism, pore filling, electrostatic force, π-π conjugation, and hydrogen bonding interactions were studied. Because of fast adsorption, large adsorption capacity, and high stability, it is a promising adsorbent for antibiotics.

Synergistic adsorption and advanced oxidation activated by persulfate for degradation of tetracycline hydrochloride using iron-modified spent bleaching earth carbon

At present, tetracycline hydrochloride (TCH) is a widely used antibiotic, and is often detected in water, posing a serious harm to human and ecological health. In this study, spent bleaching earth (SBE) was pyrolyzed to obtain spent bleaching earth carbon (SBE@C) and the nano Fe⁰/SBE@C prepared after zero-valent iron loading was adopted to remove TCH in water for the first time. The combination of nano Fe⁰/SBE@C and PS, the strong adsorption of SBE@C coupled with the oxidation of free radicals could achieve TCH efficient removal. The effects of nano Fe⁰ load, nano Fe⁰/SBE@C dosage, solution initial pH, and PS/TCH molar ratio on TCH removal efficiency in nano Fe⁰/SBE@C + PS system were studied. The results indicate that the optimal reaction conditions are 5% nano Fe⁰ load, 0.2 g/L nano Fe⁰/SBE@C dosage, initial pH of 3, PS/TCH molar ratio of 100:1. Under these conditions, TCH removal efficiency could reach 91%. Meanwhile, response surface methodology (RSM) was applied to predict optimal value of reaction conditions. The removal efficiency corresponding to the predicted optimal conditions was consistent with the actual removal efficiency obtained from the experiment. Moreover, six reaction systems were tested, and TCH removal efficiency in the SBE@C + PS system was 22.6%. When nano Fe⁰ was loaded on SBE@C, TCH removal efficiency in Fe⁰/SBE@C + PS system increased to 78.2%, in which TCH was first adsorbed on the surface of nano Fe⁰/SBE@C, and then was degraded by the oxidation of SO₄^•- and •OH. Totally, the nano Fe⁰/SBE@C + PS system displayed excellent TCH removal efficiency, good stability and reusability, exhibiting a promise toward TCH removal.

Effective adsorption of zeolite/carbon composite molecular sieve synthesized from spent bleaching earth

Spent bleaching earth (SBE) as an industrious solid rubbish seriously causes the environmental pollution problem. The resourceful utilization of SBE has become increasingly important. In this work, silicon and carbon ingredients derived from SBE were coincidently employed to synthesize a 4A zeolite/carbon composite molecular sieve (4A/CMS). Therein, the graphite carbon components in the form of porous lamellar scattering among the interlayer, surface, and periphery of 4A zeolite promote the rate of mass transfer for the lipophilic gas, which can effectively improve the adsorption property for the volatile organic compounds. The obtained 4A/CMS has large specific surface area, hierarchical pore structure, satisfactory adsorption capacity, and regeneration performance, and its equilibrium adsorption capacity of p-xylene can achieve 209.57 mg·g^-1. The pseudo-first-order rate equation is appropriate for the adsorption kinetics. In the end, the formation mechanism of 4A/CMS was illuminated in detail. □ Spent bleaching earth (SBE) as an industrious solid rubbish were utilized resourcefully. Silicon and carbon ingredients from SBE were coincidently employed to synthesize 4A/CMS. Graphitic carbon with hierarchical pore promoted the rate of mass transfer of organic gas. 4A/CMS exhibited excellent adsorption capacity and regeneration performance of p-xylene.

La/LaF3 co-modified MIL-53(Cr) as an efficient adsorbent for the removal of tetracycline

Chromium based metal-organic framework (MIL-53(Cr)) has enormous potential in the removal of organic contaminants from aqueous solutions due to its outstanding water stability, whereas its poor adsorption capacity limits the application. In this study, La/LaF₃-MIL-53(Cr) was successfully synthesized by taking the advantages of La doping and LaF₃ encapsulation with one-step hydrothermal method. Diverse analysis tools were utilized to verify that La not only existed in the framework, but also was loaded in the pores in the form of LaF₃. The adsorption experiment results demonstrated that 0.3-La/LaF₃-MIL-53(Cr) exhibited significantly improved adsorption capacity by four times compared with the pristine MIL-53(Cr) material. XPS and FTIR revealed that the affinity of La to tetracycline was significantly stronger than that of Cr and the excellent dispersion of LaF₃ in the material may also be the cause of the increase in adsorption capacity. This study described a simple method to combine two different forms of modification and the modified material was potential for tetracycline adsorption.

Insight into the mechanisms of ball-milled biochar addition on soil tetracycline degradation enhancement: Physicochemical properties and microbial community structure

A set of soil under the addition of ball-milled biochar (BM-biochar) from different feedstocks (wheat straw (WS) and rice husk (RH)) and pyrolysis temperature (300 °C, 500 °C, and 700 °C) was established to analyze the tetracycline (TC) degradation performance enhancement and greenhouse gas carbon dioxide (CO₂), and nitrous oxide (N₂O) emission reduction from various angles, including physicochemical properties of soil and microbial community structure. After 45 days' incubation, the pH value decreased slightly from 7.34 to 7.22 for WS biochar-treated soil, while slightly increased from 7.34 to 7.50 for RH biochar-treated soil. The lowest KCl-leachable TC concentrations of BMWS700 and RH700 was about 0.0037 mg/L. Ball-milled 500 °C and 700 °C biochars enhanced the removal rate of TC significantly. The maximum reduction of TC was from 2.17 to 0.079 mg/kg, equivalent to 96% removal after ball-milled 500 °C wheat straw biochar (BMWS500) addition, suggesting the promoting effect of biochars on microorganisms for adsorption and degradation of TC. Biochars' addition reduced CO₂ and N₂O emissions, BM-biochar enlarged this effect under the pyrolysis temperature 500 °C for both feedstock types. Ball milled rice husk biochar pyrolyzed under 500 °C (BMRH500) presented the maximum inhibitory effect CO₂ emission. The addition of BM-biochar changed the microbial community and diversity. The relative abundance of bacterium and fungus such as Proteobacteria, Acidobacteria, Chlorofexi, Mortierella, and Chaetomium increased due to BM-biochar addition, which promoted the degradation of TC and gave rise to more healthy soil environment for plant or microbes. The larger specific surface area, π-π interactions, hydrophobic interaction, and hydrogen bonding are account for better adsorption and degradation of TC by BM-biochars. This work elucidated the management of organic contaminants in real soil by BM-biochar.

Resource utilization of organic spent adsorbent to prepare three-dimensional sulfate-functionalized layered double oxide for superior removal of azo dye

Developing superior, rapid, cost-effective adsorbents derived from organic spent adsorbent is an economically sustainable way for purifying azo dye wastewater. Herein, we report a precursor-calcination strategy for the recycle of the organic spent adsorbent to a high value-added three-dimensional sulfate-functionalized MgAl-layered double oxide (3S-LDO). Thanks to the unique property of the sulfate group and LDO, 3S-LDO exhibited a superior (4340.71 mg/g) and ultrafast (<1 h) adsorption toward methyl orange (MO, as the representative of azo dye). A thermodynamic study revealed that the reaction process was spontaneous and exothermic. FT-IR, XPS, and XRD results confirmed that the sulfate from 3S-LDO played a vital role in MO removal wherein the S=O bond (with the electrophilic character) from SO₄^2- interacted with the N=N double bond (with rich electron) in MO through the electron donor-acceptor mechanism. And the "memory effect" and surface complexation of 3S-LDO further strengthened the MO adsorption. More importantly, 3S-LDO could work efficiently in a wide pH range and even in the presence of competitive anions (e.g., Cl^-, NO₃^-, and CO₃^2-). Multiple cyclic runs and selective tests demonstrated the excellent reusability and explicit selectivity of 3S-LDO. This work not only provides a prospective sulfate-functionalized adsorbent from organic waste for rapid azo dye removal from wastewater but also achieves the high value-added utilization of organic waste.

Efficient removal of tetracycline by a hierarchically porous ZIF-8 metal organic framework

Most reported metal organic frameworks (MOFs) have microporous structures and defective active sites, limiting their practical application to macromolecular substances. A hierarchical porous zeolitic imidazolate framework-8 (ZIF-8) was prepared using poly(diallyldimethylammonium chloride) (PDDA) as a structure-directing agent under facile "aqueous room-temperature" conditions to increase the mass transfer and adsorption capacity tetracycline hydrochloride (TCH). The ZIF-8 pore structure and morphology were synchronously tuned by controlling the PDDA molecular weight and dosage. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Bruner-Emmett-Teller (BET), scanning electron microscopy (SEM), NH₃-temperature-programmed desorption (NH₃-TPD) and adsorption results revealed abundant pore structures and open metal sites in the prepared materials, along with excellent TCH adsorption performance compared with ZIF-8, despite decreased BET surface areas. Initial screens revealed large adsorption capacities of hierarchical porous ZIF-8P3(4) (976.8 mg g^-1) due to the presence of more abundant unsaturated metal sites than ZIF-8 and novel hierarchical porous structures. Therefore, TCH adsorption on ZIF-8 and ZIF-8P3(4), including the kinetics, isotherms, thermodynamics and pH effect, was studied. The adsorption process follows pseudo-second-order kinetics and the Freundlich models better, indicating multilayer adsorption of TCH on the surface of the two absorbents. Adsorption behavior test, FTIR, XPS, BET and XRD results show that TCH adsorption on ZIF-8 and ZIF-8P3(4) most likely involves coordination bonds, electrostatic and π-π interactions, hydrogen bonds, and pore-filling effects. This study provides new insights into the template preparation of MOFs with high adsorption performance as potentially economical adsorbents to remove organic matter from contaminated water.

Adsorption Behavior of Congo Red onto Barium-Doped ZnO Nanoparticles: Correlation between Experimental Results and DFT Calculations

Ba-loaded ZnO nanoparticles (Ba/ZnO) were obtained by the co-precipitation process and employed as a sorbent for Congo Red (C₃₂H₂₂N₆Na₂O₆S₂) dye (CR). Physicochemical parameters such as particle size, pH, and contact time were checked to characterize the adsorption process. The maximum adsorption capacity of Ba/ZnO NPs for CR (1614.26 mg/g) proves its potential utility in the elimination of CR dye from wastewater. The adsorption mechanism was studied via infrared spectroscopy and density functional theory calculations. The geometrical parameters and electronic properties of the CR-Ba/ZnO complex, particularly the interaction energy, the density of states, and the charge transfer, highlighted the Ba-ion mediation in the chemical bond formation between CR and the surface. The interaction between CR and Ba-doped ZnO has found to show strong chemisorption with charge transfer between the SO₃^- group and adsorbed Ba²⁺ ion on the surface.

The preparation of three-dimensional flower-like TiO2/TiOF2 photocatalyst and its efficient degradation of tetracycline hydrochloride

A kind of high-efficiency photocatalyst of the three-dimensional flower-like TiO2/TiOF2 was synthesized by a one-step hydrothermal method. XRD, FE-SEM, EDS, HTEM, BET, XPS, PL, and UV-Vis-DRS were utilized to characterize the photocatalyst. The photocatalyst of TiO2/TiOF2 shows a narrow band gap of 2.8 eV. The generation of Ti3+ and an oxygen vacancy (Ov) in the photocatalyst are helpful to increase the absorption of visible light, and to inhibit faster charge recombination by capturing photogenerated carriers. Through the degradation of tetracycline hydrochloride (TCH) under simulated sunlight, the photocatalytic activity and stability of the synthesized samples were investigated. The results showed that the removal rate of tetracycline hydrochloride was 59% only in 0.5 h of dark reaction and 85% in 0.5 h of simulated sunlight. The removal efficiency of the photocatalyst for the adsorption and photocatalytic degradation of TCH is higher than that of the single TiO2, TiOF2, and Degussa P25. The synthesized three-dimensional flower-like TiO2/TiOF2 has great application potential in the treatment of antibiotic wastewater.

Synergetic adsorption and Fenton-like degradation of tetracycline hydrochloride by magnetic spent bleaching earth carbon: Insights into performance and reaction mechanism

In this study, the synergetic adsorption and Fenton-like degradation of tetracycline hydrochloride (TCH) by magnetic spent bleaching earth carbon (Mag-SBE@C) with H₂O₂ were developed and performed, with 91.5% of TCH degradation efficiency and 42.1% of TOC removal efficiency. The effects of the reaction parameters (temperature, initial pH, catalyst dosage, molar ratio of TCH to H₂O₂) on TCH degradation in Mag-SBE@C/H₂O₂ system were studied. Under the optimal conditions (temperature 41.1 °C, initial pH 4.89 and molar ratio of H₂O₂ to TCH 114.435) forecasted by response surface methodology (RSM), high TCH degradation efficiency (99%) was achieved. Also, four cycling tests were performed to confirm the excellent stability and regeneration ability of Mag-SBE@C in presence of H₂O₂. In addition, the characteristics of Mag-SBE@C after reaction are analyzed in details via scanning electron microscope (SEM), energy dispersive spectrometer (EDS), Brunner-Emmet-Teller (BET), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrum (FTIR) and X-ray diffraction (XRD), and it was found that Fe₃O₄ nanoparticles on Mag-SBE@C surface acted as co-catalyst and participated in degradation and improved reaction efficiency, while its properties were not greatly changed. The quenching experiments showed that hydroxyl radicals on Mag-SBE@C surface (OH_adsorption) were dominant in Mag-SBE@C/H₂O₂ system. Meanwhile, three possible TCH degradation pathways were given based on the possible intermediates determined by liquid chromatography quadrupole-time-of-flight mass spectrometry (LC-Q-TOF-MS/MS). Mag-SBE@C is an excellent heterogeneous Fenton-like catalyst, exhibiting greatly potential to antibiotics elimination.

Self-propagating synthesis of Zn-loaded biochar for tetracycline elimination

Herein, a novel Zn-loaded biochar (Zn-LBC) originating from Fraxinus pennsylvanica Marsh leaves was successfully prepared through a simple and rapid self-propagating combustion reaction (SHS) and could serve as an efficient adsorbent for tetracycline (TC) elimination from water. The adsorption performance was analyzed via a series of characterizations and batch adsorption experiments. The results showed that the novel adsorbent Zn-LBC exhibited an excellent TC adsorption capacity (159.64 mg/g), which was 2.63 times higher than that of the original biochar (60.78 mg/g). The pseudo-second-order kinetic model and Freundlich isothermal model fit the adsorption data well. It is noteworthy that Zn-LBC had little effect on the adsorption capacity of TC in the 0-10 mg/L various coexisting ion range and presence of humic acid (HA). In addition, the adsorption test of TC using hospital wastewater as the water sample also achieved satisfactory results (raw influent: 52.65 mg/g, final effluent: 85.64 mg/g). FT-IR and XPS investigations showed that the TC adsorption mechanism included surface complexation, π-π interactions, and hydrogen bonds. The results provide new ideas for exploring low-cost and highly efficient modified biochar adsorbent for TC elimination.

Clay-activated carbon adsorbent obtained by activation of spent bleaching earth and its application for removing Pb(II) ion

BE/C-A750-1/1 is prepared by carbonizing SBE and then activating with KOH. BE/C-A750-1/1 has good adsorption capacity for Pb(II), and the adsorption capacity for Pb(II) is 206.65 mg/g. The harmful effects of coexisting cations are listed in ascending order: K⁺ < Na⁺ < Mg²⁺. Adsorption and desorption studies show that the adsorption capacity of BE/C-A750-1/1 for Pb(II) after adsorption and desorption 3 times is 183.62 mg/g. The adsorption mechanism mainly includes electrostatic attraction, ion exchange, physical adsorption, and chemical complexation. This suggests that activated BE/C may be a promising candidate for removing Pb(II) from industrial wastewater. Clay/carbon nanocomposites were prepared by carbonizing and activating the spent bleaching earth served as adsorbents for the efficient removal of Pb(II) from wastewater.

Adsorption of toxic dye Eosin Y from aqueous solution by clay/carbon composite derived from spent bleaching earth

The environmentally friendly clay/carbon composite (SBE/C) was prepared by one-step pyrolysis under N₂ atmosphere at 700°C of spent bleaching earth (SBE) from the industrial waste of the refined oil industry. SBE/C was tested to remove anionic dye Eosin Y from aqueous water. The results revealed that SBE/C had larger specific surface area than SBE, and the equilibrium adsorption capacity of SBE/C (11.15 mg/g) was about 3 times than that of SBE (4.04 mg/g). The adsorption process was found to be exothermic and spontaneous. The adsorption capacity of SBE/C was independent on pH (5-12), and exhibits satisfactorily recyclable performance. Combined with characterization analysis, the adsorption mechanism likely includes electrostatic interaction, hydrogen bonding, hydrophobic interaction, halogen bonding, and π-π interaction. Overall, this exploration of SBE/C might open a window to the design of an efficient and low-cost adsorbent for Eosin Y dye elimination from wastewater. PRACTITIONER POINTS: The resource utilization of industrial waste SBE was achieved. SBE/C was synthesized and tested to adsorb Eosin Y for the first time. SBE/C had characteristics with porous structure and large surface area. pH had little effect on adsorption capacity of SBE/C for Eosin Y. SBE/C exhibited potential for dye elimination from wastewater.

Adsorption of tetracycline hydrochloride onto ball-milled biochar: Governing factors and mechanisms

Pristine and ball milled wheat stalk biochars pyrolysed at 300 °C, 450 °C, 600 °C were studied for tetracycline hydrochloride (TCH) adsorption from aqueous solution. Surface characteristics of ball milled biochar (BM-biochar) were significantly enhanced over their pristine counterparts. TCH adsorption occurred largely on external surface and by filling pores of biochars as evidenced by strong positive correlation between adsorption and external specific surface area (SSA), total pore volume, or mesoporous volume. A two-stage intra-particle diffusion model, limited by the TCH diffusion through the boundary liquid layer, well described TCH adsorption. Maximum TCH adsorption occurred at about pH = 6-8. While solution cations including Na⁺, K⁺ and Mg²⁺ subdued TCH adsorption as they competed for adsorption sites, Ca²⁺ promoted TCH adsorption due to formation of tetracycline-Ca²⁺ complexes. The best performing BM-biochar was the one pyrolysed at 600 °C with TCH adsorption amount of 84.54 mg/g. Therefore, this BM-biochar has the potential for TCH removal from aqueous solutions. And the research shed light on the management of organic contaminants in real wastewater by BM-biochar.

Magnetic spent bleaching earth carbon (Mag-SBE@C) for efficient adsorption of tetracycline hydrochloride: Response surface methodology for optimization and mechanism of action

The utilization of spent bleaching earth (SBE)-based materials for adsorption of pollutants from water and wastewater has received growing attention. In this work, a comparative study of magnetic spent bleaching earth carbon (Mag-SBE@C) and spent bleaching earth carbon (SBE@C) was performed to remove tetracycline hydrochloride (TCH) from aqueous solutions. Mag-SBE@C exhibits the larger adsorption capacity (0.238 mmol/g) obtained by the Langmuir model than the original SBE@C (0.150 mmol/g). The adsorption process fits well with the pseudo second-order model and is found to be exothermic (ΔH₀ < 0) and spontaneous (ΔG₀ < 0). The optimal adsorption conditions (Mag-SBE@C dose 2.217 g/L, initial TCH concentration 0.113 mmol/L, initial solution pH 6.533) predicted by the response surface methodology (RSM) are consistent with the actual verification results. The inhibition extents of coexisting cations are ranked in a decline: Al³⁺ > Cu²⁺ > Fe³⁺ > Mg²⁺ > K⁺ > Na⁺. Various characterization results indicate that the adsorption mechanism of TCH by Mag-SBE@C likely includes the π-π interactions, hydrogen bonding, electrostatic interactions, π-cations interactions, FeN covalent bonding, and changes in physical and chemical properties. Mag-SBE@C is easily solid-liquid separated using magnetic field, and can be potentially reused for 13 times before completely losing its activity, exhibiting great potential to antibiotics elimination.

Bio-inspired, high, and fast adsorption of tetracycline from aqueous media using Fe3O4-g-CN@PEI-β-CD nanocomposite: Modeling by response surface methodology (RSM), boosted regression tree (BRT), and general regression neural network (GRNN)

Because antibiotic-containing wastewaters are able to contaminate all environmental matrices (e.g. water bodies, soil, etc.), a special attention should be paid on developing appropriate materials for their remediation. Herein, the novel nanocomposite (NC) of Fe₃O₄-g-CN@PEI-β-CD was synthesized and employed effectively for the adsorptive removal of tetracycline (TC), the second most produced and employed antibiotic around the world. The successful fabrication of the nanocomposite with a high specific surface area (57.12 m²/g) was confirmed using XRD, SEM, TEM, FTIR, TGA, EDX, and BET analyses. The Fe₃O₄-g-CN@PEI-β-CD NC exhibited fast adsorption rates towards TC and maximum adsorption capacity on the basis of the Langmuir model reached 833.33 mg g^-1, much higher than that reported by different carbon- and/or nano-based materials. The adsorption process was modeled using the approaches of central composite design (CCD), boosted regression tree (BRT), and general regression neural network (GRNN) under various operational conditions of initial TC concentration, pH, adsorbent dose, tempreature, and time. The comparison of the models indicated good predictions of all, however, the BRT model was more accurate compared to the others, with R² = 0.9992, RMSE = 0.0026, MAE = 0.0014, and AAD = 0.0028, proving that it is a powerful approach for modeling TC adsorption by Fe₃O₄-g-CN@PEI-β-CD nanocomposite. The results showed that the order of the variables' effectiveness is as follow: pH > dose > TC concentration. The high adsorption capacity along with high efficiency (98 % in the optimized conditions by GA) ensures the potential of the as-prepared nanocomposite for in situ remediation of antibiotic-containing wastewaters.

Surface Functionalization of Montmorillonite with Chitosan and the Role of Surface Properties on Its Adsorptive Performance: A Comparative Study on Mycotoxins Adsorption

Understanding surface and interfacial information, which has a close relationship to the structures and properties of materials, helps guide the design of materials for specific applications. This study focuses on the surface functionalization of montmorillonite (Mt) with chitosan (CTS) and exploring the role of surface properties on its adsorptive performance. Two prototypical products, namely, 180-Htc@Mt and 250-Htc@Mt, were fabricated via the hydrothermal method at 180 and 250 °C, respectively. Field emission scanning electron microscopy revealed that hydrothermal carbon (Htc) derived from CTS anchored on the surface of Mt uniformly with a spherical morphology. The introduction of Htc endowed the surface of Mt with abundant hydroxy, amine, and amide groups; organic carbon; developed porosity; and hydrophobic interfacial property. Hydrothermal temperature has huge impacts on the surface system, and smaller particles (average size of 27 vs 53 nm) with deeper carbonization, higher content of carbonaceous and nitrogenous functional groups, more developed porosity (66.149 vs 39.434 m²/g of specific surface area, 0.115 vs 0.090 cm³/g of pore volume), and slightly decreased hydrophobicity can be readily achieved at a higher temperature. The incoming surface protonated amine and amide functional groups show an ion-dipolar interaction to polar aflatoxin B₁ (AFB₁), and the increased organic carbon content as well as interfacial hydrophobicity generate a hydrophobic interaction to weak polar zearalenone (ZER). Consequently, the surface functionalization affords Mt enhanced adsorption capacity for AFB₁, approximately two times compared with Mt, and superior adsorption ability for ZER (10 mg/g). The present work provides sufficient evidence of "surface directs application" of Mt, which encourages researchers to focus on studies of the surface science of clay minerals.

Transformation of novel TiOF2 nanoparticles to cluster TiO2-{001/101} and its degradation of tetracycline hydrochloride under simulated sunlight

The anatase type cluster TiO₂-{001/101} was rapidly generated by a one-step hydrothermal method. The transformation process of coral-like TiOF₂ nanoparticles to cluster TiO₂-{001/101} was investigated for the first time, and the sensitization between cluster TiO₂-{001/101} and tetracycline hydrochloride (TCH) was also discussed. The degradation rate of TCH by cluster TiO₂-{001/101} under simulated sunlight was 92.3%, and the total removal rate was 1.76 times that of P25. Besides, cluster TiO₂-{001/101} settles more easily than P25 in deionized water. The study showed that cluster TiO₂-{001/101} derived from coral-like TiOF₂ nanoparticles had a strong adsorption effect on TCH, which was attributed to the oxygen vacancy (O_v) and {001} facets of cluster TiO₂-{001/101}. The strong adsorption effect promoted the sensitization between cluster TiO₂-{001/101} and TCH, and widened the visible light absorption range of cluster TiO₂-{001/101}. In addition, the fluorescence emission spectrum showed that cluster TiO₂-{001/101} had a lower luminous intensity, which was attributed to the heterojunction formed by {001} facets and {101} facets that reduces the recombination rate of carriers. It should be noted that cluster TiO₂-{001/101} still has good degradation performance for TCH after five cycles of degradation. This study provides a new idea for the synthesis of cluster TiO₂-{001/101} with high photocatalytic performance for the treatment of TCH wastewater.

Degradation of tetracycline hydrochloride by cluster TiO₂-{001/101} under simulated sunlight.