Diffusion Behavior of Water Molecules in Hydrogels with Controlled Network Structure

Colloidal Hydrogel with Staged Sequestration and Release of Molecules Undergoing Competitive Binding

Competitive binding of distinct molecules in the hydrogel interior can facilitate dynamic exchange between the hydrogel and the surrounding environment. The ability to control the rates of sequestration and release of these molecules would enhance the hydrogel's functionality and enable targeting of a specific task. Here, we report the design of a colloidal hydrogel with two distinct pore dimensions to achieve staged, diffusion-controlled scavenging and release dynamics of molecules undergoing competitive binding. The staged scavenging and release strategy was shown for CpG oligodeoxynucleotide (ODN) and human epidermal growth factor (hEGF), two molecules exhibiting different affinities to the quaternary ammonium groups of the hydrogel. Fast ODN scavenging from the ambient environment occurred via diffusion through submicrometer-size hydrogel pores, while delayed hEGF release from the hydrogel was governed by its diffusion through nanometer-size pores. The results of the experiments were in agreement with simulation results. The significance of staged ODN-hEGF exchange was highlighted by the dual anti-inflammation and tissue proliferation hydrogel performance.

Injectable and 3D Extrusion Printable Hydrophilic Silicone-Based Hydrogels for Controlled Ocular Delivery of Ophthalmic Drugs

While silicone elastomers have found widespread use in the biomedical industry, 3D printing them has proven to be difficult due to the material's slow drying time, low viscosity, and hydrophobicity. Herein, we arrested the hydrophilic silicone (HS) macrochains into a semi-interpenetrating polymer network (semi-IPN) via an in situ photogelation-assisted 3D microextrusion printing technique. The flow behavior of the pregel solutions and the mechanical properties of the printed HS hydrogels were tested, showing a high elastic modulus (approximately 15 kPa), a low tan δ, high elasticity, and delayed network rupturing. The uniaxial compression tests demonstrated a nearly negligible permanent deformation, suggesting that the printed hybrid hydrogel maintained its elastic properties. Drug loading and diffusion in the microporous hydrogel are shown via the non-Fickian anomalous transport mechanism, leading to highly tunable loading/releasing profiles (approximately 20% cumulative release) depending on the HS concentration. The drug encapsulation exhibits exceptional stability, remaining intact without any degradation even after a storage period of 1 month. As far as we know, this is the first soft biomaterial based on HS that functions as an exceptional controlled drug delivery device.

Spatial Confinement Engineered Gel Composite Evaporators for Efficient Solar Steam Generation

Recently, solar-driven interfacial evaporation (SDIE) has been developed quickly for low-cost and sustainable seawater desalination, but addressing the conflict between a high evaporation rate and salt rejection during SDIE is still challenging. Here, a spatial confinement strategy is proposed to prepare the gel composite solar evaporator (SCE) by loading one thin hydrogel layer onto the skeleton of a carbon aerogel. The SCE retains the hierarchically porous structure of carbon aerogels with an optimized water supply induced by dual-driven forces (capillary effects and osmotic pressure) and takes advantage of both aerogels and hydrogels, which can gain energy from air and reduce water enthalpy. The SCE has a high evaporation rate (up to 4.23 kg m-2 h-1 under one sun) and excellent salt rejection performance and can maintain structural integrity after long-term evaporation even at high salinities. The SDIE behavior, including heat distribution, water transport, and salt ion distribution, is investigated by combining theoretical simulations and experimental results. This work provides new inspiration and a theoretical basis for the development of high-performance interfacial evaporators.

Dynamics of an aqueous suspension of short hyaluronic acid chains near a DPPC bilayer

The synergy between hyaluronic acid (HA) and lipid molecules plays a crucial role in synovial fluids, cell coatings, etc. Diseased cells in cancer and arthritis show changes in HA concentration and chain size, impacting the viscoelastic and mechanical properties of the cells. Although the solution behavior of HA is known in experiments, a molecular-level understanding of the role of HA in the dynamics at the interface of HA-water and the cellular boundary is lacking. Here, we perform atomistic molecular dynamics simulation of short HA chains in an explicit water solvent in the presence of a DPPC bilayer, relevant in pathological cases. We identify a stable interface between HA-water and the bilayer where the water molecules are in contact with the bilayer and the HA chains are located away without any direct contact. Both translation and rotation of the interfacial waters in contact with the lipid bilayer and translation of the HA chains exhibit subdiffusive behavior. The diffusive behavior sets in slightly away from the bilayer, where the diffusion coefficients of water and HA decrease monotonically with increase in HA concentration. On the contrary, the dependence on HA chain size is only marginal due to enhanced chain flexibility as their size increases.

Chemistries and materials for atmospheric water harvesting

Atmospheric water harvesting (AWH) is recognized as a crucial strategy to address the global challenge of water scarcity by tapping into the vast reserves of atmospheric moisture for potable water supply. Within this domain, sorbents lie in the core of AWH technologies as they possess broad adaptability across a wide spectrum of humidity levels, underpinned by the cyclic sorption and desorption processes of sorbents, necessitating a multi-scale viewpoint regarding the rational material and chemical selection and design. This Invited Review delves into the essential sorption mechanisms observed across various classes of sorbent systems, emphasizing the water-sorbent interactions and the progression of water networks. A special focus is placed on the insights derived from isotherm profiles, which elucidate sorbent structures and sorption dynamics. From these foundational principles, we derive material and chemical design guidelines and identify key tuning factors from a structural-functional perspective across multiple material systems, addressing their fundamental chemistries and unique attributes. The review further navigates through system-level design considerations to optimize water production efficiency. This review aims to equip researchers in the field of AWH with a thorough understanding of the water-sorbent interactions, material design principles, and system-level considerations essential for advancing this technology.

Molecular Clogging Organogels with Excellent Solvent Maintenance, Adjustable Modulus, and Advanced Mechanics for Impact Protection

Inspired by mechanically interlocking supramolecular materials, exploiting the size difference between the bulky solvent and the cross-linked network mesh, a molecular clogging (MC) effect is developed to effectively inhibit solvent migration in organogels. A bulky solvent (branched citrate ester, BCE) with a molecular size above 1.4 nm is designed and synthesized. Series of MC-Gels are prepared by in situ polymerization of crosslinked polyurea with BCE as the gel solvent. The MC-Gels are colorless, transparent, and highly homogeneous, show significantly improved stability than gels prepared with small molecule solvents. As solvent migration is strongly inhibited by molecular clogging, the solvent content of the gels can be precisely controlled, resulting in a series of MC-Gels with continuously adjustable mechanics. In particular, the modulus of MC-Gel can be regulated from 1.3 GPa to 30 kPa, with a variation of 43 000 times. The molecular clogging effect also provides MC-Gels with unique high damping (maximum damping factor of 1.9), impact resistant mechanics (high impact toughness up to 40.68 MJ m-3 ). By applying shatter protection to items including eggs and ceramic armor plates, the potential of MC-Gels as high strength, high damping soft materials for a wide range of applications is well demonstrated.

Sieving and Clogging in PEG-PEGDA Hydrogel Membranes

Hydrogels are promising systems for separation applications due to their structural characteristics (i.e., hydrophilicity and porosity). In our study, we investigate the permeation of suspensions of rigid latex particles of different sizes through free-standing hydrogel membranes prepared by photopolymerization of a mixture of poly(ethylene glycol) diacrylate (PEGDA) and large poly(ethylene glycol) (PEG) chains of 300,000 g·mol-1 in the presence of a photoinitiator. Atomic force microscopy and cryoscanning electron microscopy (cryoSEM) were employed to characterize the structures of the hydrogel membranes. We find that the 20 nm particle permeation depends on both the PEGDA/PEG composition and the pressure applied during filtration. In contrast, we do not measure a significant permeation of the 100 nm and 1 μm particles, despite the presence of large cavities of 1 μm evidenced by the cryoSEM images. We suggest that the PEG chains induce local nanoscale defects in the cross-linking of PEGDA-rich walls separating the micrometer-sized cavities, which control the permeation of particles and water. Moreover, we discuss the decline of the permeation flux observed in the presence of latex particles compared to that of pure water. We suggest that a thin layer of particles forms on the surface of the hydrogels.

Nanogels designed for cell-free nucleic acid sequestration

Chronic wounds exhibit over-expression of cell-free deoxyribonucleic acid (cfDNA), leading to a prolonged inflammation and non-healing wounds. Scavenging excessive cfDNA molecules is a promising strategy for chronic wound treatment. Nanoscopic particles act as efficient cfDNA scavengers due to their large surface area, however their efficiency in cfDNA uptake was limited by adsorption solely on the nanoparticle surface. In contrast, nanogels may provide multiple cfDNA binding sites in the nanoparticle interior, however their use for cfDNA scavenging is yet to be explored. Herein, we report cationic nanogels derived from a copolymer of chitosan and poly{2-[(acryloyloxy)ethyl]trimethylammonium chloride} end-grafted to the chitosan backbone as side chains. The nanogels retain their positive charge at the pH and ionic strength of chronic wound exudate, enabling electrostatically driven cfDNA scavenging. The network structure of the nanogels leads to the cfDNA sequestration in the nanogel interior, in addition to surface attachment. A key factor in cfDNA sequestration is the ratio of the pore size of the nanogel-to-cfDNA molecular dimensions. The enhanced cfDNA scavenging efficiency, along with biocompatibility of the nanogels, makes them a promising component of dressings for chronic wound treatment.

Polymer-embedded deep eutectic solvents (PEDES) as a novel bio-enabling formulation approach

There is a growing interest in using deep eutectic solvents (DES) as a pharmaceutical delivery system for poorly water-soluble compounds. To reduce the risk of drug precipitation following oral administration, this study addresses the hypothesis that directly including a polymeric precipitation inhibitor (PI) in a DES mixture could obtain a polymer-embedded deep eutectic system (PEDES) as a novel bio-enabling formulation principle. Following broad formulation screening, a PEDES embedding 15 % w/w of polyvinyl pyrrolidone K30 (PVP) in L-carnitine:ethylene glycol (1:4, molar ratio) DES was successfully formulated as a supersaturating formulation using indomethacin as model drug. The solubility of 175.6 mg/mL obtained in DES was remarkably high, and upon release (phosphate buffer, pH 6.5) a maximum supersaturation factor of 9.8 was recorded, whereby the release kinetics displayed a suitable "parachute effect". The formulation was further characterized to include a molecular dynamics simulation. It can be concluded that PEDES appears to be a viable novel formulation approach, setting solid grounds for further research to assess the full potential of this novel type of supersaturating drug delivery system.

Stimulus-Responsive Transport Properties of Nanocolloidal Hydrogels

Applications of polymer hydrogels in separation technologies, environmental remediation, and drug delivery require control of hydrogel transport properties that are largely governed by the pore dimensions. Stimulus-responsive change in pore size offers the capability to change gel's transport properties "on demand". Here, we report a nanocolloidal hydrogel that exhibits temperature-controlled increase in pore size and, as a result, enhanced transport of encapsulated species from the gel. The hydrogel was formed by the covalent cross-linking of aldehyde-modified cellulose nanocrystals and chitosan carrying end-grafted poly(N-isopropylacrylamide) (pNIPAm) molecules. Owing to the temperature-mediated coil-to-globule transition of pNIPAm grafts, they acted as a temperature-responsive "gate" in the hydrogel. At elevated temperature, the size of the pores showed up to a 4-fold increase, with no significant changes in volume, in contrast with conventional pNIPAm-derived gels exhibiting a reduction in both pore size and volume in similar conditions. Temperature-mediated transport properties of the gel were explored by studying diffusion of nanoparticles with different dimensions from the gel, leading to the established correlation between the kinetics of diffusion-governed nanoparticle release and the ratio nanoparticle dimensions-to-pore size. The proposed approach to stimulus-responsive control of hydrogel transport properties has many applications, including their use in nanomedicine and tissue engineering.

Fabrication of submillimeter-sized spherical self-oscillating gels and control of their isotropic volumetric oscillatory behaviors

In this study, we established a fabrication method and analyzed the volumetric self-oscillatory behaviors of submillimeter-sized spherical self-oscillating gels. We validated that the manufactured submillimeter-sized spherical self-oscillating gels exhibited isotropic volumetric oscillations during the Belousov-Zhabotinsky (BZ) reaction. In addition, we experimentally elucidated that the volumetric self-oscillatory behaviors (i.e., period and amplitude) and the oscillatory profiles depended on the following parameters: (1) the molar composition of N-(3-aminopropyl)methacrylamide hydrochloride (NAPMAm) in the gels and (2) the concentration of Ru(bpy)₃-NHS solution containing an active ester group on conjugation. These clarified relationships imply that controlling the amount of Ru(bpy)₃ in the gel network could influence the gel volumetric oscillation during the BZ reaction. These results of submillimeter-sized and spherical self-oscillating gels bridge knowledge gaps in the current field because the gels with corresponding sizes and shapes have not been systematically explored yet. Therefore, our study could be a cornerstone for diverse applications of (self-powered) gels in various scales and shapes, including soft actuators exhibiting life-like functions.

Fabrication and Characterization of Chicken- and Bovine-Derived Chondroitin Sulfate/Sodium Alginate Hybrid Hydrogels

The physicochemical properties and microstructure of hybrid hydrogels prepared using sodium alginate (SA) and chondroitin sulfate (CS) extracted from two animal sources were investigated. SA-based hybrid hydrogels were prepared by mixing chicken- and bovine-derived CS (CCS and BCS, respectively) with SA at 1/3 and 2/3 (w/w) ratios. The results indicated that the evaporation water loss rate of the hybrid hydrogels increased significantly upon the addition of CS, whereas CCS/SA (2/3) easily absorbed moisture from the environment. The thermal stability of the BCS/SA (1/3) hybrid hydrogel was higher than that of CCS/SA (1/3) hybrid hydrogel, whereas the hardness and adhesiveness of the CCS/SA (1/3) hybrid hydrogel were lower and higher, respectively, than those of the BCS/SA (1/3) hybrid hydrogel. Low-field nuclear magnetic resonance experiments demonstrated that the immobilized water content of the CCS/SA (1/3) hybrid hydrogel was higher than that of the BCS/SA (1/3) hybrid hydrogel. FTIR showed that S=O characteristic absorption peak intensity of BCS/SA (2/3) was obviously higher, suggesting that BCS possessed more sulfuric acid groups than CCS. SEM showed that the hybrid hydrogels containing CCS have more compact porous microstructure and better interfacial compatibility compared to BCS.

Symbolic regression development of empirical equations for diffusion in Lennard-Jones fluids

Symbolic regression (SR) with a multi-gene genetic program has been used to elucidate new empirical equations describing diffusion in Lennard-Jones (LJ) fluids. Examples include equations to predict self-diffusion in pure LJ fluids and equations describing the finite-size correction for self-diffusion in binary LJ fluids. The performance of the SR-obtained equations was compared to that of both the existing empirical equations in the literature and to the results from artificial neural net (ANN) models recently reported. It is found that the SR equations have improved predictive performance in comparison to the existing empirical equations, even though employing a smaller number of adjustable parameters, but show an overall reduced performance in comparison to more extensive ANNs.

Super-swelling Hydrogel-forming Microneedle based Transdermal Drug Delivery: Mathematical Modelling, Simulation and Experimental Validation

Super-swelling hydrogel-forming microneedles (HFMNs) based transdermal drug delivery (TDD) is gaining significant interest due to their non-invasiveness and ability to deliver a wide range of drugs. The HFMNs swell by imbibing interstitial skin fluid (ISF), and they facilitate drug transport from the reservoir attached at the base into the skin without polymer dissolution. To develop HFMNs for practical applications, a complete understanding of the drug transport mechanism is required, allowing for controlled TDD and geometrical optimisation. A three-phase system consisting of a reservoir, microneedle, and skin is considered. A mathematical model is developed to incorporate the drug binding within the matrix of the compartment, which was not considered earlier. Super-swelling nature of the HFMNs is incorporated through the swelling ratio obtained experimentally for a polymer. The results are validated with in vitro diffusion studies of ibuprofen sodium (IBU) across excised porcine skin, showing that around 20% of the loaded IBU in lyophilised wafer was delivered in 24 hours. It was observed that increasing IBU solubility in reservoir can achieve high drug transport across the skin. The developed model is shown to be in good agreement with the experimental data. It is concluded that the proposed model can be considered a tool with predictive design and development of super-swelling HFMNs based TDD systems.

Water-Saturated Ion Gel for Humidity-Independent High Precision Epidermal Ionic Temperature Sensor

Although ion gels are attractive sensing materials for deformable epidermal sensors or implantable devices, their sensing performances are highly affected by environmental humidity change, so that their sensing reliability cannot be secured. This study proposes a new concept of maintaining the high-precision temperature sensing performance of highly deformable ion gel sensors. In this approach, a hydrophobic ion gel sensing layer is kept water-saturated by attaching a hydrogel layer, rather than attempting to completely block water penetration. This study performs experimental and theoretical investigation on water concentration in the ion gel, using the analysis of mass transportation at the interface of the ion gel and the hydrogel. By using the charge relaxation time of the ionic molecules, the temperature sensor is not affected by environmental humidity in the extreme range of humidity (30%-100%). This study demonstrates a highly deformable on-skin temperature sensor which shows the same performance either in water or dry state and while exercising with large strains (ε = 50%).

Star polymer networks: a toolbox for cross-linked polymers with controlled structure

The synthesis of precisely controlled polymer networks has been a long-cherished dream of polymer scientists. Traditional random cross-linking strategies often lead to uncontrolled networks with various kinds of defects. Recent...

PEG-based Cleavable Hydrogel Microparticles with controlled porosity for permiselective trafficking of biomolecular complexes in biosensing applications

In the last decade, PEG-based hydrogels have been extensively used for the production of microparticles for biosensing applications. The biomolecule accessibility and mass transport rate represent key parameters for the...

Reaction-diffusion model to quantify and visualize mass transfer and deactivation within core-shell polymeric microreactors

HYPOTHESIS

The performance of a polymeric core-shell microreactor depends critically on (i) mass transfer, (ii) catalyzed chemical reaction, and (iii) deactivation within the nonuniform core-shell microstructure environment. As such, these three basic working principles control the active catalytic phase density in the reactor.

THEORY

We present a high-fidelity, image-based nonequilibrium computational model to quantify and visualize the mass transport as well as the deactivation process of a core-shell polymeric microreactor. In stark contrast with other published works, our microstructure-based computer simulation can provide a single-particle visualization with a micrometer spatial accuracy.

FINDINGS

We show how the interplay of kinetics and thermodynamics controls the product-induced deactivation process. The model predicts and visualizes the non-trivial, spatially resolved active catalyst phase patterns within a core-shell system. Moreover, we also show how the microstructure influences the formation of foulant within a core-shell structure; that is, begins from the core and grows radially onto the shell section. Our results suggest that the deactivation process is highly governed by the porosity/microstructure of the microreactor as well as the affinity of the products towards the solid phase of the reactor.

Molecular Characterization of Polymer Networks

Polymer networks are complex systems consisting of molecular components. Whereas the properties of the individual components are typically well understood by most chemists, translating that chemical insight into polymer networks themselves is limited by the statistical and poorly defined nature of network structures. As a result, it is challenging, if not currently impossible, to extrapolate from the molecular behavior of components to the full range of performance and properties of the entire polymer network. Polymer networks therefore present an unrealized, important, and interdisciplinary opportunity to exert molecular-level, chemical control on material macroscopic properties. A barrier to sophisticated molecular approaches to polymer networks is that the techniques for characterizing the molecular structure of networks are often unfamiliar to many scientists. Here, we present a critical overview of the current characterization techniques available to understand the relation between the molecular properties and the resulting performance and behavior of polymer networks, in the absence of added fillers. We highlight the methods available to characterize the chemistry and molecular-level properties of individual polymer strands and junctions, the gelation process by which strands form networks, the structure of the resulting network, and the dynamics and mechanics of the final material. The purpose is not to serve as a detailed manual for conducting these measurements but rather to unify the underlying principles, point out remaining challenges, and provide a concise overview by which chemists can plan characterization strategies that suit their research objectives. Because polymer networks cannot often be sufficiently characterized with a single method, strategic combinations of multiple techniques are typically required for their molecular characterization.

Ultrasound-stimulated Brownian ratchet enhances diffusion of molecules retained in hydrogels

We demonstrate that low-frequency ultrasonic stimulation applied directly to a hydrogel, at energy levels below the cavitation threshold, can control the release of a therapeutic molecule. The hydrogel that contained the molecules was enclosed within a hollow acoustic horn. The harmonic modes in the acoustic horn combined with the physical gel structure to induce a flashing ratchet that released all of the retained molecules in less than 90 s at an intensity of 1.5 W cm^-2 (applied energy of 135 J cm^-2, ultrasound center frequency of 27.9 ± 1.5 kHz). In contrast, ultrasound is used currently as a remote stimulus for drug-delivery systems, at energy levels above the cavitation threshold. The low-energy flashing ratchet approach that we describe is applicable to drive the diffusion of molecules in a range of gels that are ubiquitous in biomedical systems, including for example in drug delivery, molecule identification and separation systems.