Reconfigurable Tunneling Transistors Heterostructured by an Individual Carbon Nanotube and MoS2

Self-Rolled-Up WSe2 One-Dimensional/Two-Dimensional Homojunctions: Enabling High-Performance Self-Powered Polarization-Sensitive Photodetectors

Mixed-dimensional heterostructures integrate materials of diverse dimensions with unique electronic functionalities, providing a new platform for research in electron transport and optoelectronic detection. Here, we report a novel covalently bonded one-dimensional/two-dimensional (1D/2D) homojunction structure with robust junction contacts, which exhibits wide-spectrum (from the visible to near-infrared regions), self-driven photodetection, and polarization-sensitive photodetection capabilities. Benefiting from the ultralow dark current at zero bias voltage, the on/off ratio and detectivity of the device reach 1.5 × 103 and 3.24 × 109 Jones, respectively. Furthermore, the pronounced anisotropy of the WSe2 1D/2D homojunction is attributed to its low symmetry, enabling polarization-sensitive detection. In the absence of any external bias voltage, the device exhibits strong linear dichroism for wavelengths of 638 and 808 nm, with anisotropy ratios of 2.06 and 1.96, respectively. These results indicate that such mixed-dimensional structures can serve as attractive building blocks for novel optoelectronic detectors.

Single-Gate MoS2 Tunnel FET with a Thickness-Modulated Homojunction

Two-dimensional (2D) materials stand as a promising platform for tunnel field-effect transistors (TFETs) in the pursuit of low-power electronics for the Internet of Things era. This promise arises from their dangling bond-free van der Waals heterointerface. Nevertheless, the attainment of high device performance is markedly impeded by the requirement of precise control over the 2D assembly with multiple stacks of different layers. In this study, we addressed a thickness-modulated n/p+-homojunction prepared from Nb-doped p+-MoS2 crystal, where the issue on interface traps can be neglected without any external interface control due to the homojunction. Notably, our observations reveal the existence of a negative differential resistance, even at room temperature (RT). This signifies the successful realization of TFET operation under type III band alignment conditions by a single gate at RT, suggesting that the dominant current mechanism is band-to-band tunneling due to the ideal interface.

Modulating the Function of GeAs/ReS2 van der Waals Heterojunction with its Potential Application for Short-Wave Infrared and Polarization-Sensitive Photodetection

Van der Waals heterojunction (vdWs) of 2D materials with integrated or extended superior characteristics, opening up new opportunities in functional electronic and optoelectric device applications. Exploring methods to achieve multifunctional vdWs heterojunction devices is one of the most promising prospects in this area. Herein, a diverse function of forward rectifying diode, Zener tunneling diode, and backward rectifying diodes are realized in GeAs/ReS2 heterojunction by modulating the doping level of GeAs. The tunneling diode presents an interesting trend forward negative differential resistance (NDR) behavior which may facilitate the application of multi-value logic. More importantly, the GeAs/ReS2 forward rectifying diode exhibits highly sensitive photodetection in the wide-spectrum range up to 1550 nm corresponding to a short-wave infrared (SWIR) region. In addition, as two strong anisotropic 2D materials of GeAs and ReS2 , the heterojunction exhibits strong polarization-sensitive photodetection behavior with a dichroic photocurrent ratio of 1.7. This work provides an effective strategy to achieve multifunctional 2D vdW heterojunction devices and develops more possibilities to broaden their functionalities and applications.

High-Sensitivity 2D MoS2/1D MWCNT Hybrid Dimensional Heterostructure Photodetector

A photodetector based on a hybrid dimensional heterostructure of laterally aligned multiwall carbon nanotubes (MWCNTs) and multilayered MoS₂ was prepared using the micro-nano fixed-point transfer technique. Thanks to the high mobility of carbon nanotubes and the efficient interband absorption of MoS₂, broadband detection from visible to near-infrared (520-1060 nm) was achieved. The test results demonstrate that the MWCNT-MoS2 heterostructure-based photodetector device exhibits an exceptional responsivity, detectivity, and external quantum efficiency. Specifically, the device demonstrated a responsivity of 3.67 × 10³ A/W (λ = 520 nm, V_ds = 1 V) and 718 A/W (λ = 1060 nm, V_ds = 1 V). Moreover, the detectivity (D*) of the device was found to be 1.2 × 10¹⁰ Jones (λ = 520 nm) and 1.5 × 10⁹ Jones (λ = 1060 nm), respectively. The device also demonstrated external quantum efficiency (EQE) values of approximately 8.77 × 10⁵% (λ = 520 nm) and 8.41 × 10⁴% (λ = 1060 nm). This work achieves visible and infrared detection based on mixed-dimensional heterostructures and provides a new option for optoelectronic devices based on low-dimensional materials.

Reconfigurable Two-Dimensional Air-Gap Barristors

Reconfigurable logic circuits implemented by two-dimensional (2D) ambipolar semiconductors provide a prospective solution for the post-Moore era. It is still a challenge for ambipolar nanomaterials to realize reconfigurable polarity control and rectification with a simplified device structure. Here, an air-gap barristor based on an asymmetric stacking sequence of the electrode contacts was developed to resolve these issues. For the 2D ambipolar channel of WSe₂, the barristor can not only be reconfigured as an n- or p-type unipolar transistor but also work as a switchable diode. The air gap around the bottom electrode dominates the reconfigurable behaviors by widening the Schottky barrier here, thus blocking the injection of both electrons and holes. The electrical performances can be improved by optimizing the electrode materials, which achieve an on/off ratio of 10⁴ for the transistor and a rectifying ratio of 10⁵ for the diode. A complementary inverter and a switchable AND/OR logic gate were constructed by using the air-gap barristors as building blocks. This work provides an efficient approach with great potential for low-dimensional reconfigurable electronics.

Mixed-Dimensional 1D/2D van der Waals Heterojunction Diodes and Transistors in the Atomic Limit

Inverting a semiconducting channel is the basis of all field-effect transistors. In silicon-based metal-oxide-semiconductor field-effect transistors (MOSFETs), a gate dielectric mediates this inversion. Access to inversion layers may be granted by interfacing ultrathin low-dimensional semiconductors in heterojunctions to advance device downscaling. Here we demonstrate that monolayer molybdenum disulfide (MoS₂) can directly invert a single-walled semiconducting carbon nanotube (SWCNT) transistor channel without the need for a gate dielectric. We fabricate and study this atomically thin one-dimensional/two-dimensional (1D/2D) van der Waals heterojunction and employ it as the gate of a 1D heterojunction field-effect transistor (1D-HFET) channel. Gate control is based on modulating the conductance through the channel by forming a lateral p-n junction within the CNT itself. In addition, we observe a region of operation exhibiting a negative static resistance after significant gate tunneling current passes through the junction. Technology computer-aided design (TCAD) simulations confirm the role of minority carrier drift-diffusion in enabling this behavior. The resulting van der Waals transistor architecture thus has the dual characteristics of both field-effect and tunneling transistors, and it advances the downscaling of heterostructures beyond the limits of dangling bonds and epitaxial constraints faced by III-V semiconductors.