Allylic Aminations with Hindered Secondary Amine Nucleophiles Catalyzed by Heterobimetallic Pd–Ti Complexes

Primary Allylic Amine Synthesis via Pd-Catalyzed Direct Amination of Allylic Alcohols with Ammonium Acetate

Pd/DPEphos-catalyzed direct amination of allylic alcohols with readily available ammonium acetate as a nitrogen source provides access to convenient and scalable syntheses of primary allylic amines with high monoallylation selectivity. Mechanistic studies revealed that ammonium acetate functions as a Brønsted acid to activate the hydroxyl groups and inhibit overreaction.

Metal-Free Decarboxylative Allylation of Oxime Esters under Light Irradiation

Allylation reactions, often used as a key step for constructing complex molecules and drug candidates, typically rely on transition-metal (TM) catalysts. Even though TM-free radical allylations have been developed using allyl-stannanes, -sulfides, -silanes or -sulfones, much less procedures have been reported using simple and commercially available allyl halides, that are used for the preparation of the before-mentioned allyl derivatives. Here, we present a straightforward photocatalytic protocol for the decarboxylative allylation of oxime esters using allyl bromide derivatives under metal-free and mild conditions. This methodology yields a diverse variety of functionalized molecules including several pharmaceutically relevant molecules.

Ethylene/Polar Monomer Copolymerization by [N, P] Ti Complexes: Polar Copolymers with Ultrahigh-Molecular Weight

A series of novel titanium complexes (2a-2e) bearing [N, P] aniline-chlorodiphenylphosphine ligands (1a-1e) featuring CH3 and F substituents have been synthesized and characterized. Surprisingly, in the presence of polar additive, the complexes (2a-2e) all displayed high catalytic activities (up to 1.04 × 106 gPolymer (mol·Ti)-1·h-1 and produced copolymer with the ultrahigh molecular weight up to 1.37 × 106 g/mol. The catalytic activities are significantly enhanced by introducing electron-withdrawing group (F) into the aniline aromatic ring. Especially, the increase in activity based on different complexes followed the order of 2e > 2d > 2c > 2b > 2a. Simultaneously, density functional theory (DFT) calculations have been performed to probe the polymerization mechanism as well as the electronic and steric effects of various substituents on the catalyst backbone. DFT computation revealed that the polymerization behaviors could be adjusted by the electronic effect of ligand substituents; however, it has little to do with the steric hindrance of the substituents. Furthermore, theoretical calculation results keep well in accordance with experimental measurement results. The article provided an appealing design method that the employment of fluorine atom as electron-withdrawing to be studied is the promotive effect of transition-metal coordination polymerization.

Iridium-catalysed reductive allylic amination of α,β-unsaturated aldehydes

Allylic amination is a powerful tool for constructing N-allylic amines widely found in bioactive molecules. Generally, allylic alcohols and unsaturated hydrocarbons have been considered for allylic amination reactions to minimize waste production. Herein, we present an iridium-catalysed method for reductive allylic amination of α,β-unsaturated aldehydes with amines to afford N-allylic amines under air conditions. This protocol is demonstrated to provide products from many substrates (41 examples) in moderate-to-excellent yields. This synthetic methodology is also highlighted by the synthesis of drug molecules, optically pure products, as well as scale-up experiments.

Reactivity of Ir(I)-aminophosphane platforms towards oxidants

The iridium(I)-aminophosphane complex [Ir{κ3C,P,P'-(SiNP-H)}(cod)] has been prepared by reaction of [IrCl(cod)(SiNP)] with KCH3COO. DFT calculations show that this reaction takes place through an unexpected outer sphere mechanism (SiNP = SiMe2{N(4-C6H4Me)PPh2}2; SiNP-H = CH2SiMe{N(4-C6H4Me)PPh2}2). The reaction of [IrCl(cod)(SiNP)] or [Ir{κ3C,P,P'-(SiNP-H)}(cod)] with diverse oxidants has been explored, yielding a range of iridium(III) derivatives. On one hand, [IrCl(cod)(SiNP)] reacts with allyl chloride rendering the octahedral iridium(III) derivative [IrCl2(η3-C3H5)(SiNP)], which, in turn, reacts with tert-butyl isocyanide yielding the substitution product [IrCl(η3-C3H5)(CNtBu)(SiNP)]Cl via the observed intermediate [IrCl2(η1-C3H5)(CNtBu)(SiNP)]. On the other hand, the reaction of [Ir{κ3C,P,P'-(SiNP-H)}(cod)] with [FeCp2]X (X = PF6, CF3SO3), I2 or CF3SO3CH3 results in the metal-centered two-electron oxidation rendering a varied assortment of iridium(III) compounds. [Ir{κ3C,P,P'-(SiNP-H)}(cod)] reacts with [FeCp2]+ (1 : 2) in acetonitrile affording [Ir{κ3C,P,P'-(SiNP-H)}(CH3CN)3]2+ isolated as both the triflato and the hexafluorophosphato derivatives. Also, the reaction of [Ir{κ3C,P,P'-(SiNP-H)}(cod)] with I2 (1 : 1) yields a mixture of iridium(III) derivatives, namely the mononuclear compound [IrI(κ2P,P'-SiNP)(η2,η3-C8H11)]I, containing the η2,η3-cycloocta-2,6-dien-1-yl ligand, and two isomers of the dinuclear derivative [Ir2{κ3C,P,P'-(SiNP-H)}2(μ-I)3]I, the first species being isolated in low yield. DFT calculations indicate that [IrI(κ2P,P'-SiNP)(η2,η3-C8H11)]I forms as the result of a bielectronic oxidation of iridium(I) followed by the deprotonation of the cod ligand by iodide and the protonation of the methylene moiety of the [Ir{κ3C,P,P'-(SiNP-H)}] platform by the newly formed HI. Finally, the oxidation of [Ir{κ3C,P,P'-(SiNP-H)}(cod)] by methyl triflate proceeds via a hydride abstraction from the cod ligand, with the elimination of methane and the formation of the η2,η3-cycloocta-2,6-dien-1-yl ligand with the concomitant two-electron oxidation of the iridium centre. The crystal structures of selected compounds have been determined.

Added Complexity!-Mechanistic Aspects of Heterobimetallic Complexes for Application in Homogeneous Catalysis

Inspired by multimetallic assemblies and their role in enzyme catalysis, chemists have developed a plethora of heterobimetallic complexes for application in homogeneous catalysis. Starting with small heterobimetallic complexes with σ-donating and π-accepting ligands, such as N-heterocyclic carbene and carbonyl ligands, more and more complex systems have been developed over the past two decades. These systems can show a significant increase in catalytic activity compared with their monometallic counterparts. This increase can be attributed to new reaction pathways enabled by the presence of a second metal center in the active catalyst. This review focuses on mechanistic aspects of heterobimetallic complexes in homogeneous catalysis. Depending on the type of interaction of the second metal with the substrates, heterobimetallic complexes can be subdivided into four classes. Each of these classes is illustrated with multiple examples, showcasing the versatility of both, the types of interactions possible, and the reactions accessible.

Synthesis and reactivity of an iridium complex based on a tridentate aminophosphano ligand

The iridium(III) hydride compound [IrH{κ³C,P,P'-(SiNP-H)}(CN^tBu)₂][PF₆] (1PF₆) was obtained by reaction of [Ir(SiNP)(cod)][PF₆] with CN^tBu as the result of the intramolecular oxidative addition of the SiCH₂-H bond to iridium(I) [SiNP = Si(CH₃)₂{N(4-tolyl)PPh₂}₂, SiNP-H = CH₂Si(CH₃){N(4-tolyl)PPh₂}₂]. The mechanism of the reaction was investigated by NMR spectroscopy and DFT calculations showing that the pentacoordinated intermediate [Ir(SiNP)(cod)(CN^tBu)][PF₆] (2PF₆) forms in the first place and that further reacts with CN^tBu, affording the square planar intermediate [Ir(SiNP)(CN^tBu)₂][PF₆] (3PF₆) that finally undergoes the intramolecular oxidative addition of the SiCH₂-H bond. The reactivity of 1PF₆ was investigated. On one hand, the reaction of 1PF₆ with N-chlorosuccinimide or N-bromosuccinimide provides the haloderivatives [IrX{κ³C,P,P'-(SiNP-H)}(CN^tBu)₂][PF₆] (X = Cl, 4PF₆; Br, 5PF₆), and the reaction of 5PF₆ with AgPF₆ in the presence of acetonitrile affords the solvato species [Ir{κ³C,P,P'-(SiNP-H)}(CH₃CN)(CN^tBu)₂]²⁺ (6²⁺) isolated as the hexafluorophosphate salt. On the other hand, the reaction of 1PF₆ with HBF₄ gives the iridium(III) compound [IrH(CH₂SiF₂CH₃)(HNP)₂(CN^tBu)₂][BF₄] (7BF₄) as the result of the formal addition of hydrogen fluoride to the Si-N bonds of 1⁺ [HNP = HN(4-tolyl)PPh₂]. A similar outcome was observed in the reaction of 1PF₆ with CF₃COOH rendering 7PO₂F₂. In this case the intermediate [IrH{κ²C,P-CH₂SiMeFN(4-tolyl)PPh₂}(HNP)(CN^tBu)₂]⁺ (8⁺) was observed and characterised in situ by NMR spectroscopy. DFT calculations suggests that the reaction goes through the sequential protonation of the nitrogen atom of the Si-N-P moiety followed by the formal addition of fluoride ion to silicon. Also, the crystal structures of SiNP, 1PF₆, 4PF₆ and 7BF₄ have been determined by X-ray diffraction measurements.

Kinetic, ESI-CID-MS and Computational Studies of π-Allyliridium C,O-Benzoate-Catalyzed Allylic Amination: Understanding the Effect of Cesium Ion

The mechanism of π-allyliridium C,O-benzoate-catalyzed allylic amination was studied by (a) reaction progress kinetic analysis (RPKA), (b) tandem ESI-MS analysis, and (c) computational studies involving density functional theory (DFT) calculations. Reaction progress kinetic analysis (RPKA) reveals a zero-order dependence on allyl acetate, first-order dependence on catalyst and fractional-order dependence on amine. These data corroborate rapid ionization of the allylic acetate followed by turnover limiting C-N bond formation. To illuminate the origins of the 0.4 kinetic order dependence on amine, ESI-MS analyses of quaternary ammonium-labelled piperazine with multistage collision induced dissociation (CID) were conducted that corroborate intervention of cesium-bridged amine dimers that dissociate to form monomeric cesium amide nucleophiles. Computational data align with RPKA and ESI-CID-MS analyses and suggest early transition states mitigate the impact of steric factors, thus enabling formation of highly substituted C-N bonds with complete levels of branched regioselectivity. Specifically, trans-effects of the iridium complex facilitate nucleophilic attack at the more substituted allyl terminus trans to phosphorus with enantioselectivity governed by steric repulsions between the chiral bisphosphine ligand and the π-allyl of a dominant diastereomer of the stereogenic-at-metal complex. Beyond defining aspects of the mechanism of π-allyliridium C,O-benzoate-catalyzed allylic amination, these data reveal that a key feature of cesium carbonate not only lies in its enhanced basicity, but also its capacity for Lewis-acid enhanced Brønsted acidification of amines.

Regio- and Enantioselective Iridium-Catalyzed Amination of Alkyl-Substituted Allylic Acetates with Secondary Amines

Robust air-stable cyclometalated π-allyliridium C,O-benzoates modified by (S)-tol-BINAP catalyze the reaction of secondary aliphatic amines with racemic alkyl-substituted allylic acetates to furnish products of allylic amination with high levels of enantioselectivity. Complete branched regioselectivities were observed despite the formation of more highly substituted C-N bonds.

DMSO-allyl bromide: a mild and efficient reagent for atom economic one-pot N-allylation and bromination of 2°-aryl amines, 2-aryl aminoamides, indoles and 7-aza indoles

A mixture DMSO-allyl bromide has been developed as a reagent for an atom economic one-pot N-allylation and aryl bromination under basic conditions. Utilizing this reagent, N-allylation-bromination of a number of 2°-aryl amines, aryl aminoamides, indoles, and 7-aza indoles has been achieved. The scope of the substrates and limitations, the synthetic utility of the products, and a plausible reaction mechanism have been proposed.

One-Pot Synthesis of α-Alkyl Styrene Derivatives

There is a significant need to develop more rapid and efficient routes to styrene derivatives, since they are extensively used in polymer sciences. This manuscript reports a one-pot synthesis of an array of α-alkyl styrene derivatives from readily available natural products (i.e., estragole and safrole). This method is regioselective, producing a rearranged adduct, under transition metal-free conditions. This methodology has broad nucleophile scope, even tolerating sterically hindered nucleophiles; it is general for carbon, nitrogen, oxygen, and sulfur nucleophiles.

N-Methyl Allylic Amines from Allylic Alcohols by Mitsunobu Substitution Using N-Boc Ethyl Oxamate

We report the practical, scalable synthesis of a range of N-methyl allylic amines. Primary and secondary allylic alcohols underwent a regioselective Mitsunobu reaction with readily accessible N-Boc ethyl oxamate to deliver the corresponding N-Boc allylic amines, including in enantiopure form via stereospecific substitution. Subsequent N-methylation and Boc deprotection without chromatography yielded the amine products as hydrochloride salts. This method solves the problem of converting commercially available alcohols into often volatile N-methyl allylic amines, many of which have limited commercial availability.

H2 and carbon-heteroatom bond activation mediated by polarized heterobimetallic complexes

The field of heterobimetallic chemistry has rapidly expanded over the last decade. In addition to their interesting structural features, heterobimetallic structures have been found to facilitate a range of stoichiometric bond activations and catalytic processes. The accompanying review summarizes advances in this area since January of 2010. The review encompasses well-characterized heterobimetallic complexes, with a particular focus on mechanistic details surrounding their reactivity applications.

Evaluation of Pd→B Interactions in Diphosphinoborane Complexes and Impact on Inner-Sphere Reductive Elimination

The dative Pd→B interaction in a series of R DPBR' Pd0 and PdII complexes (R DPBR' =(o-PR2 C6 H4 )2 BR', diphosphinoborane) was analyzed using XRD, 11 B NMR spectroscopy and NBO/NLMO calculations. The borane acceptor discriminates between the oxidation state PdII and Pd0 , stabilizing the latter. Reaction of lithium amides with [(R DPBR' )PdII (4-NO2 C6 H4 )I] chemoselectively yields the C-N coupling product. DFT modelling indicates no significant impact of PdII →B coordination on the inner-sphere reductive elimination rate.

Practical regio- and stereoselective azidation and amination of terminal alkenes

There is significant interest in developing more rapid and efficient production of nitrogen-containing allylic compounds, as widely used in various syntheses. This work reports a variety of allylic azides and allylic amines synthesized by an efficient, new one-pot protocol that employs readily available terminal alkenes as starting materials. This method is highly regio- and stereoselective, affording the linear (E)-isomer, under metal-free conditions. This process tolerates several functional groups including halogen-containing molecules; it is general for azides and amine nucleophiles; and, adducts were obtained in good yields.

C-N Bond Formation from Allylic Alcohols via Cooperative Nickel and Titanium Catalysis

Amination of allylic alcohols is facilitated via cooperative catalysis. Catalytic Ti(O- i-Pr)₄ is shown to dramatically increase the rate of nickel-catalyzed allylic amination, and mechanistic experiments confirm activation of the allylic alcohol by titanium. Aminations of primary and secondary allylic alcohols are demonstrated with a variety of amine nucleophiles. Diene-containing substrates also cyclize onto the nickel allyl intermediate prior to amination, generating carbocyclic amine products. This tandem process is only achieved under our cooperative catalytic system.

Electrophilic activation of alkynes for enyne cycloisomerization reactions with in situ generated early/late heterobimetallic Pt-Ti catalysts

In situ formation of heterobimetallic Pt-Ti catalysts enables rapid room temperature catalysis in enyne cycloisomerization reactions. The Lewis acidic titanium atom in the ligand framework is shown to be essential for fast catalysis. A range of enyne substrates are efficiently cyclized to carbocycles and heterocycles in high yield.

Tantallacyclopentadiene as a unique metal-containing diene ligand coordinated to nickel for preparing tantalum–nickel heterobimetallic complexes

The mononuclear tantallacyclopentadiene, TaCl₃(C₄H₂^tBu₂), coordinates to Ni to form heterobimetallic complexes of Cl₃Ta(μ-C₄H₂^tBu₂)Ni(L) (L = COD, phosphines, IPr).