Tuning W18O49/Cu2O{111} Interfaces for the Highly Selective CO2 Photocatalytic Conversion to CH4

Pivotal Impact Factors in Photocatalytic Reduction of CO2 to Value-Added C1 and C2 Products

Over the past decades, CO2 greenhouse emission has been considerably increased, causing global warming and climate change. Indeed, converting CO2 into valuable chemicals and fuels is a desired option to resolve issues caused by its continuous emission into the atmosphere. Nevertheless, CO2 conversion has been hampered by the ultrahigh dissociation energy of C=O bonds, which makes it thermodynamically and kinetically challenging. From this prospect, photocatalytic approaches appear promising for CO2 reduction in terms of their efficiency compared to other traditional technologies. Thus, many efforts have been made in the designing of photocatalysts with asymmetric sites and oxygen vacancies, which can break the charge distribution balance of CO2 molecule, reduce hydrogenation energy barrier and accelerate CO2 conversion into chemicals and fuels. Here, we review the recent advances in CO2 hydrogenation to C1 and C2 products utilizing photocatalysis processes. We also pin down the key factors or parameters influencing the generation of C2 products during CO2 hydrogenation. In addition, the current status of CO2 reduction is summarized, projecting the future direction for CO2 conversion by photocatalysis processes.

Construction of floating photothermal-assisted S-scheme heterojunction with enhanced photocatalytic degradation of tetracycline: Insights into mechanisms, degradation pathways and toxicity assessment

Inspired by ecological floating beds to treat water pollution through photosynthesis, we employed a combination of calcination and hydrothermal methods to construct a photothermal-assisted photocatalysis system based on a floating monolithic porous mesh of g-C3N4 (MPMCN) loaded with the excellent photothermal material Bi2MoO6 (BMO), forming a BMO/MPMCN S-scheme heterojunction. This approach improved the utilization efficiency of solar light by BMO/MPMCN, minimized heat loss, and enhanced the overall temperature of the material during the reaction process, thereby accelerating interfacial electron transfer. The unique floating structure confers a larger specific surface area to BMO/MPMCN, providing more reaction sites for TC pollutants and efficiently removing TC contamination from water. BMO/MPMCN degradated 99.3% of TC after 90 min of photothermal reaction, and exhibited good recyclability and reusability. Structural and performance characterizations of the material were carried out using techniques such as XRD, TEM, electrochemical testing, and ESR. Furthermore, the corresponding band structure and S-scheme electron transfer mechanism of the BMO/MPMCN heterojunction were deduced through the combination of in-situ XPS and UPS. The possible degradation pathways of TC and the ecological toxicity changes of intermediate products were analyzed. Finally, a mechanistic model for the photothermal-assisted photocatalytic degradation of TC in water by the BMO/MPMCN S-scheme heterojunction was established, providing a novel approach for the practical application of photocatalysis technology.

Constructing cuprous oxide-modified zinc tetraphenylporphyrin ultrathin nanosheets heterojunction for enhanced photocatalytic carbon dioxide reduction to methane

The application of supermolecular naonostructures in the photocatalytic carbon dioxide reduction reaction (CO2RR) has attracted increasing attentions. However, it still faces significant challenges, such as low selectivity for multi-electron products and poor stability. Here, the cuprous oxide (Cu2O)-modified zinc tetraphenylporphyrin ultrathin nanosheets (ZnTPP NSs) are successfully constructed through the aqueous chemical reaction. Comprehensive characterizations confirm the formation of type-II heterojunction between Cu2O and ZnTPP in Cu2O@ZnTPP, and the electron transfer from Cu2O to ZnTPP through the Zn-O-Cu bond under the static contact. Under the visible-light irradiation (λ > 420 nm), the optimized Cu2O@ZnTPP sample as catalyst for photocatalytic CO2RR exhibits the methane (CH4) evolution rate of 120.9 μmol/g/h, which is ∼ 4 and ∼ 10 times those of individual ZnTPP NSs (28.0 μmol/g/h) and Cu2O (12.8 μmol/g/h), respectively. Meanwhile, the CH4 selectivity of ∼ 98.7 % and excellent stability can be achieved. Further experiments reveal that Cu2O@ZnTPP has higher photocatalytic conversion efficiency than Cu2O and ZnTPP NSs, and the photoinduced electron transfer from ZnTPP to Cu2O can be identified via the path of ZnTPP→ (ZnTPP•ZnTPP)*→ ZnTPP-→ Zn-O-Cu → Cu2O. Consequently, Cu2O@ZnTPP exhibits a shorter electron-hole separation lifetime (3.3 vs. 9.3 ps) and a longer recombination lifetime (23.1 vs. 13.4 ps) than individual ZnTPP NSs. This work provides a strategy to construct the organic nanostructures for photocatalytic CO2RR to multi-electron products.

Construction of Dual-Active Sites by Interfacing with Polyhydroxy Fullerene on Nickel Hydroxide Surfaces to Promote CO2 Deep Photoreduction to CH4

Due to the complex series of elementary steps involved, achieving deep photoreduction of CO2 to multielectron products such as CH4 remains a challenging task. Therefore, it is crucial to strategically design catalysts that facilitate the controlled formation of the crucial intermediates and provide precise control over the reaction pathway. Herein, we present a pioneering approach by employing polyhydroxy fullerene (PHF) molecules to modify the surface of Ni(OH)2, creating stable and effective synergistic sites to enhance the formation of CH4 from CO2 under light irradiation. As a result, the optimized PHF-modified Ni(OH)2 cocatalyst achieves a CH4 production rate of 455 μmol g-1 h-1, with an electron-based selectivity of approximately 60%. The combination of in situ characterizations and theoretical calculations reveals that the hydroxyl species on the surface of PHF can participate in stabilizing crucial intermediates and facilitating water activation, thereby altering the reaction pathway to form CH4 instead of CO. This study provides a novel approach to regulating the selectivity of photocatalytic CO2 reduction by exploring molecular surface modification through interfacing with functionalized carbon clusters.

Visible-Light-Driven Inactivation of Bacteria and H2 Generation Catalyzed by Oxygen-Vacancy-Rich One-Dimensional/Two-Dimensional W18O49/g-C3N4 Z-Scheme Heterostructures

Z-scheme heterostructure-based photocatalysts consist of a reduction photocatalyst and an oxidation photocatalyst, enabling them to possess a high capacity for both reduction and oxidation. However, the coupling reaction between photocatalytic H2 generation through water reduction and sterilization using Z-scheme systems has been rarely reported. Herein, 1D W18O49 nanowires embedded over 2D g-C3N4 nanosheets are well-constructed as an integrated Z-scheme heterojunction. Experimental results and density functional theory calculations not only demonstrate the achievement of efficient interfacial charge separation and transport, leading to prolonged lifetime of photogenerated charge carriers, but also directly confirm the mechanism of Z-scheme charge transfer. As expected, the optimized W18O49/g-C3N4 nanostructure exhibits superior photocatalytic sterilization activity against Staphylococcus aureus as well as excellent H2 generation performance under visible-light irradiation (λ ≥ 420 nm). Due to its nontoxic nature, W18O49/g-C3N4 holds great potential in eradicating bacterial infections in living organisms.

Fabrication of Ultrafine Cu2 O Nanoparticles on W18 O49 Ultra-Thin Nanowires by In-Situ Reduction for Highly Efficient Photocatalytic Nitrogen Fixation

Photocatalytic ammonia synthesis technology is one of the important methods to achieve green ammonia synthesis. Herein, two samples of Cu ion-doped W18 O49 with different morphologies, ultra-thin nanowires (Cu-W18 O49 -x UTNW) and sea urchin-like microspheres (Cu-W18 O49 -x SUMS), are synthesized by a simple solvothermal method. Subsequently, Cu2 O-W18 O49 -x UTNW/SUMS is synthesized by in situ reduction, where the NH3 production rate of Cu2 O-W18 O49 -30 UTNW is 252.4 µmol g-1  h-1 without sacrificial reagents, which is 11.8 times higher than that of the pristine W18 O49 UTNW. The Cu2 O-W18 O49 -30 UTNW sample is rich in oxygen vacancies, which promotes the chemisorption and activation of N2 molecules and makes the N≡N bond easier to dissociate by proton coupling. In addition, the in situ reduction-generated Cu2 O nanoparticles exhibit ideal S-scheme heterojunctions with W18 O49 UTNW, which enhances the internal electric field strength and improves the separation and transfer efficiency of the photogenerated carriers. Therefore, this study provides a new idea for the design of efficient nitrogen fixation photocatalysis.

Recent advances in perovskite-based Z-scheme and S-scheme heterojunctions for photocatalytic CO2 reduction

The dramatic rise in carbon dioxide levels in the atmosphere caused by the continuous use of carbon fuels continues to have a significant impact on environmental degradation and the disappearance of energy reserves. Past few years have seen a significant increase in the interest in photocatalytic carbon dioxide reduction because of its ability to lower CO2 releases from the burning of fossil fuels while also producing fuels and important chemical products. Because of their excellent catalytic efficiency, great uniformity, lengthy charge diffusion layers and texture flexibility that enable accurate band gap and band line optimization, perovskite-based nanomaterials are perhaps the most advantageous among the numerous semiconductors proficient in accelerating CO2 conversion under visible light. Firstly, a brief insight into photocatalytic CO2 conversion mechanism and structural features of perovskites are discussed. Further the classification and selection of perovskites for Z and S-scheme heterojunctions and their role in photocatalytic CO2 reduction analysed. The efficient modification and engineering of heterojunctions via co-catalyst loading, morphology control and vacancy introduction have been comprehensively reviewed. Third, the state-of-the-art achievements of perovskite-based Z-scheme and S-scheme heterojunctions are systematically summarized and discussed. Finally, the challenges, bottlenecks and future perspectives are discussed to provide a pathway for applying perovskite-based heterojunctions for solar-to-chemical energy conversion.

Copper(II)-Doped Two-Dimensional Titanium-Based Metal-Organic Frameworks toward Light-Driven CO2 Reduction to Value-Added Products

Recently, metal-organic framework (MOF)-based photocatalysts for an efficient CO₂ reduction reaction have drawn wide attention in multidisciplinary fields and sustainable chemistry. In this work, a series of Cu²⁺-doped two-dimensional Ti-based MOFs were fabricated by a facile in situ solvothermal method. Cu²⁺ ions were doped in equal proportions and uniformly dispersed in the crystal structure of the MOF matrix. Interestingly, the doping content of Cu²⁺ ions and the photocatalytic performance displayed an obvious volcanic relationship, the medium-concentration Cu²⁺-doped sample (T1-2Cu) held the greatest activity with 100% carbonaceous product (CH₄ and CO) formation, and the CH₄ production rate was 3.7 μmol g^-1 h^-1 with 93% electron selectivity. The band structure, local electronic structure, carrier separation kinetics, and CO₂ adsorption studies demonstrated that the excellent photocatalytic activity of T1-2Cu benefited from the appropriate amount of Cu²⁺ ion doping: (1) a doping amount of 2 atom % optimized the conduction band position of the MOF substrate and endowed T1-2Cu with strong reduction potential in thermodynamics, (2) doping Cu²⁺ ions tuned the local electronic environment around titanium oxide clusters and optimized the generation, separation, and migration processes of photoinduced carriers, and (3) the introduction of Cu²⁺ ions also provided more accessible active sites and more probabilities for the adsorption and activation of CO₂ reactants.

Promoting photocatalytic CO2 reduction to CH4 via a combined strategy of defects and tunable hydroxyl radicals

A well-designed photocatalyst with excellent activity and selectivity is crucial for photocatalytic CO₂ conversion and utilization. TiO₂ is one of the most promising photocatalysts. However, its excessive surface oxidation potential and insufficient surface active sites inhibit its activity and photocatalytic CO₂ reduction selectivity. In this work, highly dispersed Bi₂Ti₂O₇ was introduced into defective TiO₂ to adjust its oxidation potential and the generation of radicals, further inhibiting reverse reactions during the photocatalytic conversion of CO₂. Moreover, an in situ topochemical reaction etching route was designed, which achieved defective surfaces, a contacted heterophase interface, and an efficient electron transfer path. The optimized heterophase photocatalyst exhibited 93.9% CH₄ selectivity at a photocatalytic rate of 6.8 μmol·g^-1·h^-1, which was 7.9 times higher than that of P25. This work proposes a feasible approach to fabricating photocatalysts with well-designed band structures, highly dispersed heterophase interfaces, and sufficient surface active sites to effectively modulate the selectivity and activity of CO₂ photoreduction by manipulating the reaction pathways.

Core-shell ZIF-8@MIL-68(In) derived ZnO nanoparticles-embedded In2O3 hollow tubular with oxygen vacancy for photocatalytic degradation of antibiotic pollutant

Developing a novel core-multishelled metal oxide hollow tube with rich oxygen vacancy is highly attractive in photocatalytic degradation of antibiotic pollutant. Herein, ZnO@In₂O₃ core-shell hollow microtubes were synthesized via one-step calcination of ZIF-8@MIL-68(In) formed by an in-situ self-assembly. TEM images demonstrate that 0D ZnO quantum dots (QDs) shell with 0.2 µm were well coated on the surface of 1D In₂O₃ hollow tube as the core with 1.2 µm. The synthesized heterostructure indicates the enhanced photocatalytic performance in tetracycline (TC) degradation compared with single ZIF-derived ZnO and MIL-68(In)-derived In₂O₃ under simulated solar irradiation. Besides, organic pollutants including malachite green (MG), methylene blue (MB) and rhodamine B (RhB) are further used to evaluate the photocatalytic activity of ZnO@In₂O₃, and the effect of weight ratios between ZnO and In₂O₃ on degradation efficiency is also studies. The ZnO@In₂O₃ heterojunction can provide higher specific surface area, expose more active sites, possess appropriate number of oxygen vacancies, enhance light absorption and further effectively boost the transfer and separation of photoinduced charge carriers. In addition, the proposed photocatalytic mechanism and degradation pathway are discussed in detail based on active species trapping test, electron spin resonance (ESR) and LCMS.

Recent advances in Cu2O-based composites for photocatalysis: a review

Cu₂O-based composites for photocatalysis have been extensively explored owing to their promising application in solving environmental and energy problems. At present, the research on photocatalysis is focused on improving the photocatalytic performance of materials. It has been reported that adjusting the morphology and size of Cu₂O can effectively improve its photocatalytic property. However, photocorrosion is still an inevitable problem, which hinders the application of Cu₂O in photocatalysis. The strategies of constructing heterogeneous nanostructures and ion doping can significantly improve the light stability, light absorption capacity and separation efficiency of electron-hole pairs. Cu₂O-based composites exhibit superior performances in degrading organic matter, producing hydrogen, reducing CO₂ and sterilization. Therefore, the construction of multi-materials will be one of the future directions in their photocatalytic application. This review summarizes the recent strategies for enhancing the photocatalytic activity of Cu₂O by analyzing different Cu₂O-based photocatalysts, and the charge transfer pathway is further discussed in detail. Finally, several opportunities and challenges in the field of photocatalysis are illustrated.

Constructing electron transfer pathways and active centers over W18O49 nanowires by doping Fe3+ and incorporating g-C3N5 for enhanced photocatalytic nitrogen fixation

A compound constructed from fluffy and porous g-C₃N₅ with OV-rich Fe-W₁₈O₄₉ was employed in the photocatalytic nitrogen fixation. The formation rate of ammonia reached 131.6 μmol g⁻¹ h⁻¹ when Fe-W₁₈O₄₉/g-C₃N₅ was employed as the catalyst.