Efficient Utilization of the Active Sites in Defective Graphene Blocks through Functionalization Synergy for Compact Capacitive Energy Storage

Defective nitrogen doped carbon material derived from nano-ZIF-8 for enhanced in-situ H2O2 generation and tetracycline hydrochloride degradation in electro-Fenton system

Tetracycline hydrochloride (TC) accumulates in large quantities in the water environment, causing a serious threat to human health and ecological environment safety. This research focused on developing cost-effective catalysts with high 2e- selectivity for electro-Fenton (EF) technology, a green pollution treatment method. Defective nitrogen-doped porous carbon (d-NPC) was prepared using the metal-organic framework as the precursor to achieve in-situ H2O2 production and self-decomposition into high activity ·OH for degradation of TC combined with Co2+/Co3+. The d-NPC produced 172.1 mg L-1 H2O2 within 120 min, and could degrade 96.4% of TC in EF system. The self-doped defects and graphite-nitrogen in d-NPC improved the oxygen reduction performance and increased the H2O2 yield, while pyridine nitrogen could catalyze H2O2 to generate ·OH. The possible pathway of TC degradation was also proposed. In this study, defective carbon materials were prepared by ball milling, which provided a new strategy for efficient in-situ H2O2 production and the degradation of pollutants.

Effects of Intrinsic Defects in Pt-Based Carbon Supports on Alkaline Hydrogen Evolution Reaction

Carbon material has widely been utilized in the synthesis of efficient carbon-supported Pt (Pt/C) catalysts, in which the structural properties greatly influence the electrocatalytic performances of Pt/C catalysts. However, the effects of intrinsic defects in carbon supports on the performance of the alkaline hydrogen evolution reaction (HER) have not been systematically investigated. Herein, porous carbon supports with different degrees of intrinsic defects were prepared by a simple template-assisted strategy, and the resulting samples were systematically studied by various analytical methods. The results suggested that the presence of abundant intrinsic defects (vacancy and topological defects) in the carbon support was advantageous in terms of favoring the dispersion and anchoring of Pt species, promoting electron transfer between Pt atoms and the carbon support, and tuning the electronic states of Pt species. These features improved the HER performance of Pt/C catalysts. Compared to the nontemplate-assisted carbon-supported Pt catalyst (Pt/NTC) with an overpotential of 178 mV, the optimized template-assisted carbon-supported Pt catalyst (Pt/TC) exhibited a lower overpotential of 58 mV at 10 mA cm-2. Besides, the Pt/TC catalyst displayed better HER durability than the Pt/NTC catalyst owing to its strong metal-support interaction. The DFT calculations confirmed the important role played by intrinsic defects (vacancy and topological defects) in stabilizing Pt atoms, with Pt-C3 coordination identified as the most favorable structure for improving the HER performance of Pt. Overall, novel insights on the significant contribution of intrinsic defects in porous carbon supports on the HER performances of Pt/C catalysts were provided, useful for future design and fabrication of advanced carbon-supported catalysts or other carbon-based electrode materials.

Direct carbonization of cellulose toward hydroxyl-rich porous carbons for pseudocapacitive energy storage

Designing carbon materials with specific oxygen-containing functional groups is very attractive for the precise decoration of carbon electrode materials and the basic understanding of specific charge storage mechanisms, which contributes to the further development of high-performance carbon materials for energy storage and conversion applications. In this contribution, a hydroxyl-rich micropore-dominated porous carbon material was obtained by direct carbonization of cellulose. The content of oxygen atoms in hydroxyl form in the obtained carbon is nearly 6 at.%. With the pyrolysis temperature changed, the macroscopic morphology, the specific surface area, surface functional groups, and graphitization degree of the carbon materials were changed strongly. Besides, the carbon material obtained with a carbonization temperature of 900 °C (C9) showed enhanced specific capacitance in sulfuric acid, sodium hydroxide, and sodium sulfate aqueous electrolytes, which mainly originates from the contribution of pseudocapacitance. The pseudocapacitance mainly depends on the presence of surface hydroxyl functional groups. Besides, the pseudocapacitance value of C9 material in neutral electrolytes (151.34 F g-1) is about twice that in acidic (75.9 F g-1) and alkaline (75.78 F g-1) electrolytes.

MnO2 porous carbon composite from cellulose enabling high gravimetric/volumetric performance for supercapacitor

Preparing electrode material integrated with high gravimetric/volumetric capacitance and fast electron/ion transfer is crucial for the practical application. Owing to the structural contradiction, it is a big challenge to construct electrode material with high packing density, sufficient ion transport channels, and fast electronic transfer pathways. Herein, MnO2 porous carbon composite with abundant porous structure and 3D carbon skeleton was facilely fabricated from Linum usitatissimum. L stems via NaOH activation and MnO2 introduction. The in-situ introduced MnO2 not only increases the packing density and the electrical conductivity of the porous carbon but also provides more active sites for oxidation reactions. These unique characteristics endow the resultant MnO2 porous carbon composite with remarkable gravimetric capacitance of 549 F g-1, volumetric capacitance of 378 F cm-3, and capacitance retention of 54.9 %. Giving the simple process and low cost, this work might offer a new approach for structural design and the practical application of high-performance electrode materials.

Revealing the Self-Doping Defects in Carbon Materials for the Compact Capacitive Energy Storage of Zn-Ion Capacitors

Zn-ion capacitors are attracting great attention owing to the abundant and relatively stable Zn anodes but are impeded by the low capacitance of porous carbon cathodes with insufficient energy storage sites. Herein, using ball-milled graphene with different defect densities as the models, we reveal that the self-doping defects of carbon show a capacitive energy storage behavior with robust charge-transfer kinetics, providing a capacitance contribution of ca. 90 F g^-1 per unit of defect density (A_D/A_G value from Raman spectra) in both aqueous and organic electrolytes. Furthermore, a simple NaCl-assisted ball-milling method is developed to prepare novel graphene blocks (BSG) with abundant self-doping defect density, enriched pores, balanced electric conductivity, and high compact density (0.83 g cm^-3). The optimized ion and electron transfer paths promote efficient utilization of the self-doping defects in BSG, contributing to improved gravimetric and volumetric capacitance (224 F g^-1/186 F cm^-3 at 0.5 A g^-1) and remarkable rate performance (52.2% capacitance retention at 20 A g^-1). The defect engineering strategy may open up a new avenue to improve the capacitive performance of dense carbons for Zn-ion capacitors.

Lithiophilic onion-like carbon spheres as lithium metal uniform deposition host

Lithium metal is considered as a promising anode material for next-generation secondary batteries, owing to its high theoretical specific capacity (3860 mA h g^-1). Nevertheless, the practical application of Li in lithium metal batteries (LMBs) is hampered by inhomogeneous Li deposition and irreversible "dead Li", which lead to low coulombic efficiency (CE) and safe hazards. Designing unique lithiophilic structure is an efficient strategy to control Li uniformly plating /stripping. Here, we report the silver (Ag) nanoparticles coated with nitrogen-doped onion-like carbon microspheres (Ag@NCS) as a host to reduce the nucleation overpotential of Li for dendrite-free LBMs. The Ag@NCS were prepared by a simple one-step injection pyrolysis. The lithiophilic Ag is demonstrated to be priority selective deposition of Li in the carbon cage. Meanwhile, the onion-like structure benefits to uniform lithium nucleation and dendrite-free lithium during cycling. Impressively, we successfully captured lithium metal on different hosts at atomic scale, further proving that Ag@NCS can effectively and uniformly deposit Li. Besides, Ag@NCS show a superiorly electrochemical performance with a low nucleation overpotential (∼1 mV), high CE and stable cycling performance (over 400 cycles at 0.5 mA cm^-2) compared to the Ag-free onion-like carbon in LMBs. Even under harsh conditions (1 mA cm^-2, 4 mA h cm^-2), Ag@NCS still present superior cycling stability for more than 150 cycles. Furthermore, a full cell composed of LiFePO₄ cathode exhibits significantly improved voltage hysteresis with low voltage polarization. This work provides a new choice and route for the design and preparation of lithiophilic host materials.