Tale of COF-on-MOF Composites with Structural Regulation and Stepwise Luminescence Enhancement

Construction of MOF@COF-derived composites for ratiometric fluorescence detection of water with ultralow background

A ratiometric sensor with ultralow background is highly desired due to its low environmental influence and high sensitivity. Herein, inspired by the solubility difference of carboxylate in aqueous and organic solvents, we prepared a core-shell structure porous zirconia-covalent organic framework (COF) composite through thermal hydrolysis of UiO-66-COF precursors in organic alkali solution. The ligand 2-aminoterephthalic acids (H2BDC-NH2) of UiO-66 were transformed into 2-aminoterephthalate salts (ATA salts) that existed in zirconium-oxo clusters building units. The composites emitted only yellow emission (597 nm) from the COF in organic solvent due to the insolubility of ATA salts that induce aggregation-caused quenching (ACQ) and the protection of the COF shell. Contrarily, when water was added into mixture, the ATA salts were released into solution and its fluorescence recovered at 446 nm, while the fluorescence of COF was quenched due to the blockage of the intramolecular charge transfer (ICT) process by water. Thus, a high-sensitivity ratiometric fluorescence method is obtained with ultralow background signal and fast response (less than 1 min) for sensing water in organic solvent. We believe that the proposed ratiometric fluorescence sensor based on the zirconia-COF composite will provide the guidance for detection with wide applications.

Covalent Organic Framework/Graphene Hybrids: Synthesis, Properties, and Applications

To address current energy crises and environmental concerns, it is imperative to develop and design versatile porous materials ideal for water purification and energy storage. The advent of covalent organic frameworks (COFs), a revolutionary terrain of porous materials, is underscored by their superlative features such as divinable structure, adjustable aperture, and high specific surface area. However, issues like inferior electric conductivity, inaccessible active sites impede mass transfer and poor processability of bulky COFs restrict their wider application. As a herculean stride forward, COF/graphene hybrids amalgamate the strengths of their constituent components and have in consequence, enticed significant scientific intrigue. Herein, the current progress on the structure and properties of graphene-based materials and COFs are systematically outlined. Then, synthetic strategies for preparing COF/graphene hybrids, including one-pot synthesis, ex situ synthesis, and in situ growth, are comprehensively reviewed. Afterward, the pivotal attributes of COF/graphene hybrids are dissected in conjunction with their multifaceted applications spanning adsorption, separation, catalysis, sensing, and energy storage. Finally, this review is concluded by elucidating prevailing challenges and gesturing toward prospective strides within the realm of COF/graphene hybrids research.

MOF@COF Nanocapsules Enhance Soft Tissue Sarcoma Treatment: Synergistic Effects of Photodynamic Therapy and PARP Inhibition on Tumor Growth Suppression and Immune Response Activation

Soft tissue sarcomas (STS) are highly malignant tumors with limited treatment options owing to their heterogeneity and resistance to conventional therapies. Photodynamic therapy (PDT) and poly-ADP-ribose polymerase (PARP) inhibitors (PARPi) have shown potential for STS treatment, with PDT being effective for sarcomas located on the extremities and body surface and PARPi targeting defects in homologous recombination repair. To address the limitations of PDT and harness the potential of PARPi, herein, a novel therapeutic approach for STS treatment combining nanocapsules bearing integrated metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), i.e., MOF@COF, with PDT and PARPi is proposed. Nanocapsules are designed, referred to as ZTN@COF@poloxamer, which contain a Zr-based MOF and tetrakis (4-carbethoxyphenyl) porphyrin as a photosensitizer, are coated with a COF to improve the sensitizing properties, and are loaded with niraparib to inhibit DNA repair. Experiments demonstrate that this new nanocapsules treatment significantly inhibits STS growth, promotes tumor cell apoptosis, exhibits high antitumor activity with minimal side effects, activates the immune response of the tumor, and inhibits lung metastasis in vivo. Therefore, MOF@COF nanocapsules combined with PARPi offer a promising approach for STS treatment, with the potential to enhance the efficacy of PDT and prevent tumor recurrence.

Reticular framework materials for photocatalytic organic reactions

Photocatalytic organic reactions, harvesting solar energy to produce high value-added organic chemicals, have attracted increasing attention as a sustainable approach to address the global energy crisis and environmental issues. Reticular framework materials, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), are widely considered as promising candidates for photocatalysis owing to their high crystallinity, tailorable pore environment and extensive structural diversity. Although the design and synthesis of MOFs and COFs have been intensively developed in the last 20 years, their applications in photocatalytic organic transformations are still in the preliminary stage, making their systematic summary necessary. Thus, this review aims to provide a comprehensive understanding and useful guidelines for the exploration of suitable MOF and COF photocatalysts towards appropriate photocatalytic organic reactions. The commonly used reactions are categorized to facilitate the identification of suitable reaction types. From a practical viewpoint, the fundamentals of experimental design, including active species, performance evaluation and external reaction conditions, are discussed in detail for easy experimentation. Furthermore, the latest advances in photocatalytic organic reactions of MOFs and COFs, including their composites, are comprehensively summarized according to the actual active sites, together with the discussion of their structure-property relationship. We believe that this study will be helpful for researchers to design novel reticular framework photocatalysts for various organic synthetic applications.

Highly Efficient Dual-Color Luminophores for Sensitive and Selective Detection of Diclazepam Based on MOF/COF Bi-Mesoporous Composites

Currently, studies on electrochemiluminescence (ECL) mainly focused on the single emission of luminophores while those on multi-color ECL were rarely reported. Here, a bi-mesoporous composite of the metal-organic framework (MOF)/covalent-organic framework (COF) with strong and stable dual-color ECL was prepared to construct a novel ECL sensor for sensitive detecting targets. A PTCA-COF with excellent ECL performance was loaded with a great amount of another ECL emitter Cu₃(HHTP)₂. Remarkably, the integrated composite had both ECL properties of PTCA-COF at 520 nm and Cu₃(HHTP)₂ at 600 nm wavelengths. Furthermore, Cu₃(HHTP)₂ with good electron transfer ability can greatly enhance the electrical conductivity and promote electrochemical activation. Thus, the simultaneous enhanced two-color ECL intensity and the catalytic properties of the conductive MOF exerted a dual enhancement effect on the ECL signal of the composite. Significantly, diclazepam can not only be adsorbed well on the multi-stage porous structure MOF/COF composite by π-π interactions but also selectively quench the ECL signal of the PTCA-COF, realizing the sensitive detection. The ECL sensor showed a wide detection range from 1.0 × 10^-13 to 1.0 × 10^-8 g/L, and the limit of detection (LOD) was as low as 2.6 × 10^-14 g/L (S/N = 3). The proposed ECL sensor preparation method was simple and sensitive, providing a new perspective for the potential application of multi-color ECL in the sensing field.

Amino-functionalized Al-MOF modulated TpTt-COF with dual-emission for fluorescent and optosmart detecting tetracycline in food samples

Tetracycline residues in animal-derived food pose serious harm to human health, making it demanded to develop simple and sensitive method for detecting tetracycline. Herein, a dual-emission synchronous response fluorescence probe is reported based on amino-functionalized Al-MOF modulated TpTt-COF (donate as NMT). NMT exhibits excellent dual-emission at 455 and 575 nm under single excitation. Tetracycline is sensitively detected through quenching the dual-emission of NMT. NMT specifically recognizes tetracycline through intermolecular hydrogen bonding between -OH/-NH₂ of tetracycline and deprotonated O^-/-NH-/CN of NMT. A calibration curve is built between the fluorescence ratio and the tetracycline concentration with a detection limit of 0.014 μmol/L. NMT is employed to detect tetracycline in milk, pork and chicken, and displays satisfactory recoveries of 94.39-105.67%, respectively. The optosmart sensor based on NMT and smartphone has been constructed for visually detecting tetracycline. This method provides routes to construct MOF-COF fluorescence probes and has good prospects in food analysis.

Covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) as electrochemical sensors for the efficient detection of pharmaceutical residues

Pharmaceutical residues are the undecomposed remains from drugs used in the medical and food industries. Due to their potential adverse effects on human health and natural ecosystems, they are of increasing worldwide concern. The acute detection of pharmaceutical residues can give a rapid examination of their quantity and then prevent them from further contamination. Herein, this study summarizes and discusses the most recent porous covalent-organic frameworks (COFs) and metal-organic frameworks (MOFs) for the electrochemical detection of various pharmaceutical residues. The review first introduces a brief overview of drug toxicity and its effects on living organisms. Subsequently, different porous materials and drug detection techniques are discussed with materials' properties and applications. Then the development of COFs and MOFs has been addressed with their structural properties and sensing applications. Further, the stability, reusability, and sustainability of MOFs/COFs are reviewed and discussed. Besides, COFs and MOFs' detection limits, linear ranges, the role of functionalities, and immobilized nanoparticles are analyzed and discussed. Lastly, this review summarized and discussed the MOF@COF composite as sensors, the fabrication strategies to enhance detection potential, and the current challenges in this area.

Covalent Organic Frameworks (COFs) as Multi-Target Multifunctional Frameworks

Covalent organic frameworks (COFs), synthesized from organic monomers, are porous crystalline polymers. Monomers get attached through strong covalent bonds to form 2D and 3D structures. The adjustable pore size, high stability (chemical and thermal), and metal-free nature of COFs make their applications wider. This review article briefly elaborates the synthesis, types, and applications (catalysis, environmental Remediation, sensors) of COFs. Furthermore, the applications of COFs as biomaterials are comprehensively discussed. There are several reported COFs having good results in anti-cancer and anti-bacterial treatments. At the end, some newly reported COFs having anti-viral and wound healing properties are also discussed.

Color-Tunable Binary Copolymers Manipulated by Intramolecular Aggregation and Hydrogen Bonding

Construction of color-tunable luminescent polymeric materials with enhanced emission intensity and room-temperature phosphorescence (RTP) performance regulated by a single chromophore component is highly desirable in the scope of photoluminescent materials. Herein, a set of binary copolymers were facilely synthesized using free radical polymerization by selecting different types of polymer matrix and N-substituted naphthalimides (NPA) as chromophores. Surprisingly, the fluorescence emission of copolymers could be remarkably enhanced, because of the intramolecular aggregation of NPA manipulated by a single polymer chain in both solution and solid state. Moreover, RTP signals of binary copolymers were all clearly observed in the air without any processing procedure, because of the embedding of phosphors into hydrogen bonding networks after copolymerization with vinyl-based acrylamide monomers. Taking advantages of the synergistic effect of copolymerization-induced aggregation and copolymerization-induced rigidification to promote optical performance, UV stimulus-responsive luminescent polymer films with processability, flexibility, and adjustable emission wavelength were simply prepared using a drop-casting method in large scale, the setting of which is the basis for application in the fields of organic optoelectronics, information security, and bioimaging/sensing.