Synthesis of the Ni2P-Co Mott-Schottky Junction as an Electrocatalyst to Boost Sulfur Conversion Kinetics and Application in Separator Modification in Li-S Batteries

High-Loading Lithium-Sulfur Batteries with Solvent-Free Dry-Electrode Processing

Lithium-sulfur (Li-S) batteries, with their high energy density, nontoxicity, and the natural abundance of sulfur, hold immense potential as the next-generation energy storage technology. To maximize the actual energy density of the Li-S batteries for practical applications, it is crucial to escalate the areal capacity of the sulfur cathode by fabricating an electrode with high sulfur loading. Herein, ultra-high sulfur loading (up to 12 mg cm-2) cathodes are fabricated through an industrially viable and sustainable solvent-free dry-processing method that utilizes a polytetrafluoroethylene binder fibrillation. Due to its low porosity cathode architecture formed by the binder fibrillation process, the dry-processed electrodes exhibit a relatively lower initial capacity compared to the slurry-processed electrode. However, its mechanical stability is well maintained throughout the cycling without the formation of electrode cracking, demonstrating significantly superior cycling stability. Additionally, through the optimization of the dry-processing, a single-layer pouch cell with a loading of 9 mg cm-2 and a novel multi-layer pouch cell that uses an aluminum mesh as its current collector with a total loading of 14 mg cm-2 are introduced. To address the reduced initial capacity of dry-processed electrodes, strategies such as incorporating electrocatalysts or employing prelithiated active materials are suggested.

Boron-Doped Dinickel Phosphide to Enhance Polysulfide Conversion and Suppress Shuttling in Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are promising for next-generation high-energy energy storage systems. However, the slow reaction kinetics render mobile polysulfides hardly controlled, yielding shuttling effects and eventually damaging Li metal anodes. To improve the cyclability of Li-S batteries, high-efficiency catalysts are desired to accelerate polysulfide conversion and suppress the shuttling effect. Herein, we studied a doping system with Ni2P and Ni2B as the end members and found a B-doped Ni2P catalyst that demonstrates high activity for Li-S batteries. As anionic dopants, B demonstrates an interesting reverse electron transfer to P and tunes the electronic structure of Ni2P dramatically. The resultant B-doped Ni2P exhibits short Ni-B bonds and strong Ni-S interaction, and the electron donation of B to P further enhances the adsorption of polysulfide on catalysts. The S-S bonds of polysulfides were activated appropriately, therefore decreasing a low energy barrier for conversion reactions.

Hierarchical Ohmic Contact Interface Engineering for Efficient Hydrazine-Assisted Hydrogen Evolution Reaction

Hydrazine oxidation reaction coupled with hydrogen evolution reaction (HER) is an effective strategy to achieve low energy water splitting for hydrogen production. In order to realize the application of hydrazine-assisted HER system, researchers have been focusing on the development of electrocatalysts with integrated dual active sites, while the performance under high current density is still unsatisfying. In this work, hierarchical Ohmic contact interface engineering is designed and used as a bridge between the NiMo and Ni2 P heterojunction toward industrial current density applications, with the charge transfer impedance greatly eliminated via such a pathway with low energy barrier. As a proof-of-concept, the importance of charge redistribution and energy barrier at the Ohmic contact interface is investigated by significantly reducing the voltage of overall hydrazine splitting (OHzS) at high current density. Intriguingly, the NiMo/Ni2 P hierarchical Ohmic contact heterojunction can drive current densities of 100 and 500 mA cm-2 with only 181 and 343 mV cell voltage in the OHzS electrolyzer with high electrocatalytic stability. The proposed hierarchical Ohmic contact interface engineering paves new avenue for hydrogen production with low energy consumption.

Surface design for high ion flux separator in lithium-sulfur batteries

Addressing the shuttle effect is a critical challenge in realizing practical applications of lithium-sulfur batteries. One promising avenue refers to the surface modification of separators, transitioning them from closed to open structures. In the current investigation, a high ion flux separator was devised by means of MnO2 self-assembly onto a Porous Polypropylene (PP) separator, subsequently coupling it with biochar. The separator exhibited favorable ion and electronic conductivity. Moreover, it adeptly captured and transformed polysulfides into Li2S2/Li2S, cyclically curbing the mobility of Polysulfide lithium (LiPSs). In addition, this augmentation in the kinetic conversion of LiPSs during the electrochemical process translated into an impressive discharge specific capacity and area capacity of 939 mAh/g and 4 mAh cm-2, respectively. Moreover, this innovative design methodology provides an alternative avenue for future separator designs within lithium-sulfur batteries.

Co/CoS2 Heterojunction Embedded in N, S-Doped Hollow Nanocage for Enhanced Polysulfides Conversion in High-Performance Lithium-Sulfur Batteries

Modulating the electronic configuration of the substrate to achieve the optimal chemisorption toward polysulfides (LiPSs) for boosting polysulfide conversion is a promising way to the efficient Li-S batteries but filled with challenges. Herein, a Co/CoS2 heterostructure is elaborately built to tuning d-orbital electronic structure of CoS2 for a high-performance electrocatalyst. Theoretical simulations first evidence that Co metal as the electron donator can form a built-in electric field with CoS2 and downshift the d-band center, leading to the well-optimized adsorption strength for lithium polysulfides on CoS2 , thus contributing a favorable way for expediting the redox reaction kinetics of LiPSs. As verification of prediction, a Co/CoS2 heterostructure implanted in porous hollow N, S co-doped carbon nanocage (Co/CoS2 @NSC) is designed to realize the electronic configuration regulation and promote the electrochemical performance. Consequently, the batteries assembled with Co/CoS2 @NSC cathode display an outstanding specific capacity and an admirable cycling property as well as a salient property of 8.25 mAh cm-2 under 8.18 mg cm-2 . The DFT calculation also reveals the synergistic effect of N, S co-doping for enhancing polysulfide adsorption as well as the detriment of excessive sulfur doping.

Bifunctional Additive for Lithium-Sulfur Batteries Based on the Metal-Phthalocyanine Complex

With extremely high specific capacity and high energy density, lithium-sulfur batteries (LSBs) have attracted enormous interest as promising candidates for energy storage devices. However, several problems, such as the shuttle effect and sluggish redox kinetics, hinder the successful realization of LSBs on an industrial scale. Therefore, designing an efficient electrode material to inhibit the shuttle effect and improve the reaction kinetics of polysulfides (LiPS) is of utmost significance. Herein, a bifunctional additive with excellent polysulfide adsorption and superior catalytic behavior is developed using the phthalocyanine-tetrasulfonic acid nickel complex tetrasodium salt (Ni-PCTs) additive. Ni-PCTs provide effective trapping of LiPS due to their abundant sulfonic acid groups. Moreover, Ni-PCTs exhibit effective catalytic conversion of LiPS due to the presence of N atoms in the phthalocyanine ring as well as the central Ni atoms. Consequently, the as-assembled LSBs, with a 10 wt % Ni-PCTs additive, exhibit a significant increase in specific capacities, such as the high initial specific capacity of 1283 mA h g-1 at 0.15 mA/cm2 and a stable specific capacity of 623 mA h g-1 after 400 cycles. The current study demonstrates the promise of metal phthalocyanines for sulfur cathodes, opening up avenues for further research and development of LSBs.

Quantum dot heterostructures on N-doped graphene with accelerated diffusion kinetics for stable lithium-ion storage

The high energy density and low self-discharge rate of lithium-ion batteries make them promising for large-scale energy storage. However, the practical development of such electrochemical energy storage systems relies heavily on the development of anode materials with high multiplier capacity and stable cycle life. Here, a simple and efficient one-step hydrothermal method is used to obtain stannide heterostructures, which are loaded on N-doped graphene (SnS2/SnO2@NG) that promotes Li+ diffusion for fast charge transfer. It is demonstrated that the built-in electric field generated by the electron transfer from electron-rich SnS2 to SnO2 in the stannide heterojunction collectively provides abundant cation adsorption sites, accelerating the migration of Li+ thus improving the electrochemical reaction kinetics. Besides, the SnS2/SnO2 nanoparticles have high structural stability, and the heterojunction compressive stresses obtained from density functional theory (DFT) calculations can significantly limit the structural damage. When applied as anodes in Li+ batteries with 300 cycles at 0.5 A/g, we achieved a high reversible capacity of 892.73 mAh/g. The rational design of low-cost batteries for energy storage and conversion can benefit from the quantitative design of fast and persistent charge transfer in a stannide heterostructure.

A strontium ferrite modified separator for adsorption and catalytic conversion of polysulfides for excellent lithium-sulfur batteries

Lithium-sulfur batteries (LSBs) have emerged as one of the ideal contenders for the upcoming generation of high energy storage devices due to their superb energy density. Nonetheless, the shuttle effect generated by intermediate lithium polysulfides (LiPSs) during cell cycling brings about capacity degradation and poor cycling stability of LSBs. Here, a versatile SrFe₁₂O₁₉ (FSO) and acetylene black (AB) modified PP separator is first presented to inhibit the shuttle effect. Thanks to the strong chemical interaction of Fe and Sr with polysulphides in FSO, it can trap LiPSs and provide catalytic sites for their conversion. Therefore, the cell using the FSO/AB@PP separator has a high initial discharge specific capacity (930 mA h g^-1) at 2 C and lasts for 1000 cycles with a remarkably low fading rate (0.036% per cycle), while those using PE and AB@PP separators have inferior initial specific capacities (255 mA h g^-1 and 652 mA h g^-1, respectively) and fail within 600 cycles. This work proposes a novel approach for addressing the shuttle of LiPSs from a bimetallic oxide modified separator.