Atomic Oxygen Tailored Graphene Oxide Nanosheets Emissions for Multicolor Cellular Imaging

Facile synthesis of N-doped graphene quantum dots as a fluorescent sensor for Cr(vi) and folic acid detection

The development of stable fluorescent sensors for toxic pollutants and drugs is meaningful to the environment and public health. In this work, nitrogen-doped graphene quantum dots (N-GQDs) were facially synthesized by a one-step hydrothermal method using soluble starch and l-arginine as carbon and nitrogen sources in pure water at 190 °C for 4 h. The as-synthesized N-GQDs were well characterized and displayed blue fluorescence emission at 445 nm with excellent pH stability, salt tolerance, thermostability, photobleaching resistance and reproducibility. Moreover, N-GQDs could serve as an "on-off" sensor for selective detection of Cr(vi) and folic acid with low detection limit (0.80 and 2.1 μM), good linear correlation over wide linear range (0-50 μM and 0-200 μM) as well as short response time (<10 s). The practical applications of N-GQDs for Cr(vi) and folic acid detection in actual samples were further investigated and showed acceptable recoveries (92-105%) with relative standard deviations less than 5%. These results indicated that this N-GQDs-based sensor could be a potential alternative for Cr(vi) and folic acid detection in the fields of environmental monitoring and drug analysis.

Amide salt pyrolysis fabrication of graphene nanosheets with multi-excitation single color emission

A novel and simple approach of using amide salt pyrolysis to produce photoluminescent (multi-excitation and single color emission) graphene nanosheets (GNs) with a thickness of <1 nm and a diameter of about 100-200 nm is described herein. It has characteristics of high water solubility, low toxicity, easy manufacturing, etc., and has potential application prospects in analytical chemistry and biomedicine.

Waste derived approach towards wealthy fluorescent N-doped graphene quantum dots for cell imaging and H2O2 sensing applications

Herein, we report the synthesis of a highly fluorescent nitrogen doped graphene quantum dots (N-GQDs) from waste precursors such as melamine sponge and arjuna bark via a microwave treatment and its functional and morphological characterization using various spectroscopy techniques such as optical, FTIR, XPS and TEM. The as-prepared aqueous N-GQD (dia. 2-3 nm) was used for the bio-imaging application using breast carcinoma cell line (MDA-MB-231) as a model, and the locations of all cells in the cytoplasm as well as nuclei were observed to stain brightly in blue fluorescent color successfully. In addition to that, the aqueous N-GQD showed fluorescence quenching behavior in the presence of hydrogen peroxide, which was exploited to sense H₂O₂, a probable toxin generated in the diseased cells. Importantly, the cell cytotoxicity was measured and found to be non-toxic (70% survival) to the MDA-MB-231 cells even at very high concentration (∼1.8 mg/ml) of the synthesized N-GQD. This study revealing excellent biocompatibility and imaging of the model cancer cells, and sensing of H₂O₂ by fluorescent quenching, indicates potential in-vivo cell culture applications of the prepared fluorescent N-GQD.

Facile and green synthesis of carbon nanodots from environmental pollutants for cell imaging and Fe3+ detection

An economical and green approach has been provided to turn environmental pollutants into carbon nanodots for their potential applications in both bioimaging and Fe3+ detection.

Probing the emission dynamics in nitrogen doped carbon dots by reversible capping with mercury (II) through surface chemistry

In this study, the mechanistic insight and emission dynamics have been explored of size dependent nitrogen doped carbon quantum dots (namely 3A,3B & 3C) with toxic metal Hg2+ ions via...

Nanomaterial Additives for Fabrication of Stimuli-Responsive Skeletal Muscle Tissue Engineering Constructs

Volumetric muscle loss necessitates novel tissue engineering strategies for skeletal muscle repair, which have traditionally involved cells and extracellular matrix-mimicking scaffolds and have thus far been unable to successfully restore physiologically relevant function. However, the incorporation of various nanomaterial additives with unique physicochemical properties into scaffolds has recently been explored as a means of fabricating constructs that are responsive to electrical, magnetic, and photothermal stimulation. Herein, several classes of nanomaterials that are used to mediate external stimulation to tissue engineered skeletal muscle are reviewed and the impact of these stimuli-responsive biomaterials on cell growth and differentiation and in vivo muscle repair is discussed. The degradation kinetics and biocompatibilities of these nanomaterial additives are also briefly examined and their potential for incorporation into clinically translatable skeletal muscle tissue engineering strategies is considered. Overall, these nanomaterial additives have proven efficacious and incorporation in tissue engineering scaffolds has resulted in enhanced functional skeletal muscle regeneration.

Karakkat J, Truskewycz A, Saedi AA, Joseph P, Apostolopoulos V, Nurgali K, Cole I, Cai Z, T. H. Lai D. Bioimaging of C2C12 Muscle Myoblasts Using Fluorescent Carbon Quantum Dots Synthesized from Bread

Biocompatible carbon quantum dots (CQDs) have recently attracted increased interest in biomedical imaging owing to their advantageous photoluminescence properties. Numerous precursors of fluorescent CQDs and various fabrication procedures are also reported in the literature. However; the use of concentrated mineral acids and other corrosive chemicals during the fabrication process curtails their biocompatibility and severely limits the utilization of the products in cell bio-imaging. In this study; a facile; fast; and cost-effective synthetic route is employed to fabricate CQDs from a natural organic resource; namely bread; where the use of any toxic chemicals is eliminated. Thus; the novel chemical-free technique facilitated the production of luminescent CQDs that were endowed with low cytotoxicity and; therefore; suitable candidates for bioimaging sensors. The above mentioned amorphous CQDs also exhibited fluorescence over 360-420 nm excitation wavelengths; and with a broad emission range of 360-600 nm. We have also shown that the CQDs were well internalized by muscle myoblasts (C2C12) and differentiated myotubes; the cell lines which have not been reported before.

Mechanisms behind excitation- and concentration-dependent multicolor photoluminescence in graphene quantum dots

Despite numerous efforts, the mechanism behind multicolor photoluminescence (PL) in graphene quantum dots (GQDs) is still controversial. A deep insight into the origin of the multicolor emissions in GQDs is quite necessary for modulating their luminescence to facilitate the better use of this fluorescent material. Herein, GQDs with amino, carboxyl, and ammonium carboxylate groups were synthesized. The as-prepared GQDs exhibited intriguing excitation- and concentration-dependent multicolor PL characteristics. By regulating the excitation wavelength or concentration of GQDs, specific luminescence colors including blue, cyan, green, yellow, and even orange can be obtained. Systematic structural and optical studies indicated that the graphene basal plane and different functional groups dominantly exhibited nN 2P-σ*, π-π*, nO 2p-π* (-COOH), nO 2p-π* (-COO-) and nN 2p-π* electronic transitions, which appeared as multi-fluorescent centers that gave rise to the excitation-dependent multicolor PL. The occurrence of different types of electronic transitions and their color emissions were proved by pH-dependent PL measurements. In addition, systematic optical and morphology analyses revealed that GQDs could self-assemble into J-type aggregates with different morphologies and sizes as the concentration increased, and the observed concentration-dependent multicolor PL can be ascribed to aggregation-mediated energy level reconstruction in GQDs. Our findings further suggest that the competition among various fluorescent centers and self-aggregation processes dominated the luminescent properties of GQDs. This work will contribute to understand the origins of excitation- and concentration-dependent multicolor emissions in GQDs, which is also highly instructive for broadening the application fields of GQDs.

Green synthesis, biomedical and biotechnological applications of carbon and graphene quantum dots. A review

Carbon and graphene quantum dots are prepared using top-down and bottom-up methods. Sustainable synthesis of quantum dots has several advantages such as the use of low-cost and non-toxic raw materials, simple operations, expeditious reactions, renewable resources and straightforward post-processing steps. These nanomaterials are promising for clinical and biomedical sciences, especially in bioimaging, diagnosis, bioanalytical assays and biosensors. Here we review green methods for the fabrication of quantum dots, and biomedical and biotechnological applications.

Graphene Oxide: From Tunable Structures to Diverse Luminescence Behaviors

Since the first discovery of luminescent graphene oxide (GO), exponentially increasing investigations on the tunable structures and surfaces for modulating its optical properties have struggled to expand applications in imaging, sensing, biomedical diagnostics, and so on. Here, the latest works on reconstructing or modifying the structures and surfaces of GO to achieve diverse luminescence are systematically reviewed, including fluorescence, electroluminescence, and chemiluminescence. Moreover, the fundamental difficulties of the investigations and applications of luminescent GO nanomaterials are clarified to inspire more constructive thoughts for expanding their application boundaries.

Graphene- and Graphene Oxide-Based Nanocomposite Platforms for Electrochemical Biosensing Applications

Graphene and its derivatives such as graphene oxide (GO) and reduced GO (rGO) offer excellent electrical, mechanical and electrochemical properties. Further, due to the presence of high surface area, and a rich oxygen and defect framework, they are able to form nanocomposites with metal/semiconductor nanoparticles, metal oxides, quantum dots and polymers. Such nanocomposites are becoming increasingly useful as electrochemical biosensing platforms. In this review, we present a brief introduction on the aforementioned graphene derivatives, and discuss their synthetic strategies and structure-property relationships important for biosensing. We then highlight different nanocomposite platforms that have been developed for electrochemical biosensing, introducing enzymatic biosensors, followed by non-enzymatic biosensors and immunosensors. Additionally, we briefly discuss their role in the emerging field of biomedical cell capture. Finally, a brief outlook on these topics is presented.

Synthesis of Carbon Quantum Dot Nanoparticles Derived from Byproducts in Bio-Refinery Process for Cell Imaging and In Vivo Bioimaging

The carbon quantum dot (CQD), a fluorescent carbon nanoparticle, has attracted considerable interest due to its photoluminescent property and promising applications in cell imaging and bioimaging. In this work, biocompatible, photostable, and sustainably sourced CQDs were synthesized from byproducts derived from a biorefinery process using one-pot hydrothermal treatment. The main components of byproducts were the degradation products (autohydrolyzate) of biomass pretreated by autohydrolysis. The as-synthesized CQDs had a size distribution from 2.0⁻6.0 nm and had high percentage of sp² and sp³ carbon groups. The CQDs showed blue-green fluorescence with a quantum yield of ~13%, and the fluorescence behaviors were found to be stable with strong resistance to photobleaching and temperature change. In addition, it is found that the as-synthesized CQDs could be used for imaging of cells and tumors, which show potential applications in bioimaging and related fields such as phototherapy and imaging.

Graphene Oxide as an Optical Biosensing Platform: A Progress Report

A few years ago, crucial graphene oxide (GO) features such as the carbon/oxygen ratio, number of layers, and lateral size were scarcely investigated and, thus, their impact on the overall optical biosensing performance was almost unknown. Nowadays valuable insights about these features are well documented in the literature, whereas others remain controversial. Moreover, most of the biosensing systems based on GO were amenable to operating as colloidal suspensions. Currently, the literature reports conceptually new approaches obviating the need of GO colloidal suspensions, enabling the integration of GO onto a solid phase and leading to their application in new biosensing devices. Furthermore, most GO-based biosensing devices exploit photoluminescent signals. However, further progress is also achieved in powerful label-free optical techniques exploiting GO in biosensing, particularly using optical fibers, surface plasmon resonance, and surface enhanced Raman scattering. Herein, a critical overview on these topics is offered, highlighting the key role of the physicochemical properties of GO. New challenges and opportunities in this exciting field are also highlighted.

Graphene-based advanced nanoplatforms and biocomposites from environmentally friendly and biomimetic approaches

Environmentally friendly and biomimetic approaches to fabricate graphene-based advanced nanoplatforms and biocomposites for biomedical applications are summarized in this review.

Synthesis of carbon quantum dots with green luminescence from potato starch

Water-soluble carbon quantum dots (CQDs) are synthesized via an acid assisted ultrasonic route using the biomass carbon precursor of potato starch as the raw material.

Simultaneous drug delivery and cellular imaging using graphene oxide

Graphene oxide (GO), a derivative of graphene, and its related nanomaterials have attracted much attention in recent years due to the excellent biocompatibility and large surface area of GO with abundant oxygen functional groups, which further enable it to serve as a nano-bio interface. Herein, we demonstrate the induction of blue fluorescence in GO suspensions via a mild thermal annealing procedure. Additionally, this procedure preserves the oxygen functional groups on the graphene plane which enables the conjugation of cancer drugs without obvious cytotoxicity. Consequently, we demonstrate the capability of GO to simultaneously play the dual-role of a: (i) cellular imaging agent and (ii) drug delivery agent in CT26 cancer cells without the need for additional fluorescent protein labeling. Our method offers a simple, controllable strategy to tune and enhance the fluorescence property of GO, which shows potential for biomedical applications and fundamental studies.

Advances on graphene-based nanomaterials for biomedical applications

Graphene-based nanomaterials, such as graphene oxide and reduced graphene oxide, have been attracting increasing attention in the field of biology and biomedicine over the past few years. Incorporation of these novel materials with drug, gene, photosensitizer and other cargos to construct novel delivery systems has witnessed rapid advance on the basis of their large surface area, distinct surface properties, excellent biocompatibility and pH sensitivity. Moreover, the inherent photothermal effect of these appealing materials enables them with the ability of killing targeting cells via a physical mechanism. Recently, more attentions have been attached to tissue engineering, including bone, neural, cardiac, cartilage, musculoskeletal, and skin/adipose tissue engineering, due to the outstanding mechanical strength, stiffness, electrical conductivity, various two-dimensional (2D) and three-dimensional (3D) morphologies of graphene-based nanomaterials. Herein, emerging applications of these nanomaterials in bio-imaging, drug/gene delivery, phototherapy, multimodality therapy and tissue engineering were comprehensively reviewed. Inevitably, the burgeon of this kind of novel materials leads to the endeavor to consider their safety so that this issue has been deeply discussed and summarized in our review. We hope that this review offers an overall understanding of these nanomaterials for later in-depth investigations.

Facile and large-scale synthesis of green-emitting carbon nanodots from aspartame and the applications for ferric ions sensing and cell imaging

A facile, economical and green strategy to prepare green-fluorescent nitrogen-doped carbon nanodots (N-CDs) with a quantum yield (QY) of approximately 31.91% has been built up, while aspartame was employed as the carbon-nitrogen source for the first time. The prepared N-CDs exhibited ultrahigh brightness, favorable strong photostability and negligible cytotoxicity. The outstanding optical properties are mainly derived from the their robost composition and steric distribution of the doped nitrogen atoms, which have been characterized detailedly. The obtained N-CDs showed highly selective and sensitive response toward ferric ions (Fe³⁺) through a fluorescence static quenching process in a wide linear range of 0.005-60µmol/L. The detection limit was as low as 1.43nmol/L, allowing the analysis of Fe³⁺ in a very simple method. The excitation-dependent luminescent behavior of the obtained N-CDs guaranteed the multicolor emissive property when they were used in cell imaging. And the application for intracellular Fe³⁺ sensing further verified this novel N-CDs may open more opportunities in biosensor, bioimaging and biological assay.

Coffee Grounds to Multifunctional Quantum Dots: Extreme Nanoenhancers of Polymer Biocomposites

Central to the design and execution of nanocomposite strategies is the invention of polymer-affinitive and multifunctional nanoreinforcements amenable to economically viable processing. Here, a microwave-assisted approach enabled gram-scale fabrication of polymer-affinitive luminescent quantum dots (QDs) from spent coffee grounds. The ultrasmall dimensions (approaching 20 nm), coupled with richness of diverse oxygen functional groups, conferred the zero-dimensional QDs with proper exfoliation and uniform dispersion in poly(l-lactic acid) (PLLA) matrix. The unique optical properties of QDs were inherited by PLLA nanocomposites, giving intensive luminescence and high visible transparency, as well as nearly 100% UV-blocking ratio in the full-UV region at only 0.5 wt % QDs. The strong anchoring of PLLA chains at the nanoscale surfaces of QDs facilitated PLLA crystallization, which was accompanied by substantial improvements in thermomechanical and tensile properties. With 1 wt % QDs, for example, the storage modulus at 100 °C and tensile strength increased over 2500 and 69% compared to those of pure PLLA (4 and 57.3 MPa), respectively. The QD-enabled energy-dissipating and flexibility-imparting mechanisms upon tensile deformation, including the generation of numerous shear bands, crazing, and nanofibrillation, gave an unusual combination of elasticity and extensibility for PLLA nanocomposites. This paves the way to biowaste-derived nanodots with high affinity to polymer for elegant implementation of distinct light management and extreme nanoreinforcements in an ecofriendly manner.

Graphene-Based Biosensors: Going Simple

The main properties of graphene derivatives facilitating optical and electrical biosensing platforms are discussed, along with how the integration of graphene derivatives, plastic, and paper can lead to innovative devices in order to simplify biosensing technology and manufacture easy-to-use, yet powerful electrical or optical biosensors. Some crucial issues to be overcome in order to bring graphene-based biosensors to the market are also underscored.

Fluorophore-functionalized graphene oxide with application in cell imaging

A fluorescent carbon material with excellent fluorescence performances and a nearly nucleus-staining was prepared by a simple method.