Chemical Warfare Agents Detoxification Properties of Zirconium Metal-Organic Frameworks by Synergistic Incorporation of Nucleophilic and Basic Sites

Green synthesis of MOF-based textile composites for the degradation of a chemical warfare agent simulant

A green synthesis of UiO-66-NH2 embedded in chitosan and deposited on textiles has been investigated for the degradation of chemical warfare agents. This method requires no heating or use of toxic solvents. The composite synthesized presents an interesting efficiency in detoxifying common simulants of chemical warfare agents, such as DMNP. In parallel, resistance and permeability tests were also realized in order to confirm the suitability of the composites for further applications.

Starfruit-Shaped Zirconium Metal-Organic Frameworks: From 3D Intermediates to 2D Nanosheet Petals with Enhanced Catalytic Activity

We present the fabrication of a novel Starfruit-shaped metal-organic framework (SMOF) composed of zirconium and Tetra(4-carboxyphenyl)porphine linkers. The SMOF exhibits a unique morphology with edge-sharing two-dimensional (2D) nanosheet petals. Our investigation unravels a captivating transformation process, wherein three-dimensional (3D) shuttle-shaped MOFs form initially and subsequently evolve into 2D nanosheet-based SMOF structures. The distinct morphology of SMOF showcases superior catalytic activity in detoxifying G-type nerve agent and blister agent simulants, surpassing that of its 3D counterparts. This discovery of the 3D-to-2D transition growth pathway unlocks exciting opportunities for exploring novel strategies in advanced MOF nanostructure development, not only for catalysis but also for various other applications.

Construction of imidazole@defective hierarchical porous UiO-66 and fibrous composites for rapid and nonbuffered catalytic hydrolysis of organophosphorus nerve agents

Hydrolytic destruction of toxic organophosphorus nerve agents by metal-organic framework (MOF) catalysts is commonly reliant on bulk water and volatile liquid base, preventing real-world implementation. Poor accessibility to MOF-based active sites in heterogeneous catalysis is also a crucial factor since reactants diffusion is limited by inherently small micropores. To overcome these practical limitations, a ligand-selective pyrolysis strategy was used to construct unsaturated Zr defects and additional mesopores in UiO-66(Zr). Owing to synergistic effect of Zr defects and hierarchical pores, hydrolysis rate constant (k) of nerve agent simulant DMNP (dimethyl 4-nitrophenyl phosphate) on optimal DHP-UiO-30% (defective hierarchical porous UiO-66) is 3.2 times higher than counterpart UiO-30% in N-ethylmorpholine buffer. Encapsulating imidazole (Im) into DHP-UiO-30% affords Im@DHP-UiO, mimicking phosphotriesterase. Im-72@DHP-UiO exhibits rapid DMNP detoxification with 99% conversion in 12 min and initial half-life (t1/2) of 1.8 min in nonbuffered water. As the first example of 'three-in-one' detoxifier, Im@DHP-UiO is further integrated onto nonwoven fabric to construct Im@DHP/Fiber, achieving solid-phase detoxification at ambient humidity with t1/2 of 19.6 min and final conversion of 91%. This is comparable to many powdered catalysts in aqueous solution buffered by volatile bases. This unified strategy is critical and viable to efficiently hydrolyze nerve agents in practical settings.

High Capacity Adsorption and Degradation of a Nerve Agent Simulant and a Pesticide by a Nickel Pyrazolate Metal-Organic Framework

The development of materials that enable the efficient removal of toxic compounds is important for the improvement of current protective materials or decontamination technologies. Current materials rely either on agent removal by adsorption or by effecting (catalytic) degradation. Ideally, both of these mechanisms are combined in a single material in order to target a more broad spectrum of toxic agents and to improve the performance of the materials. Recent attempts to combine materials with either adsorptive or catalytic properties into a composite material are promising, although the overall performance often suffers from competition for the agent between the adsorptive and catalytic domains in the composites. In this work, we propose that metal-organic frameworks (MOFs) could feature both adsorptive properties as well as catalytic properties in a single structural domain, thereby avoiding a reduction in the overall performance originating from competitive agent interactions. We showcase this concept using the MOF Ni3(BTP)2, which exhibits strong affinity and high capacity for the storage of a nerve agent simulant and a pesticide. Moreover, it is demonstrated that the adsorbed agents are efficiently degraded and that the nontoxic degradation products are rapidly expelled from the MOF pores. Its ability to catalyze the hydrolytic degradation of both organophosphate and organophosphorothioate compounds highlights another unique feature of this material. The presented concept illustrates the feasibility for developing materials that target a broader spectrum of agents via adsorption, catalysis, or both and by their broader reactivity toward different types of agents.

Humidity Enhances the Solid-Phase Catalytic Ability of a Bulk MOF-808 Metal-Organic Gel toward a Chemical Warfare Agent Simulant

Zirconium-based metal-organic frameworks have emerged as promising materials for detoxifying chemical warfare agents (CWAs) due to their remarkable stability and porosity. However, their practical application is hindered by issues with their powder form and poor catalytic performance in solid-phase degradation. To address these challenges, herein, a granular MOF-808 metal-organic gel (G808) is prepared under optimized conditions for catalytic degradation of the simulant 2-chloroethyl ethyl sulfide (2-CEES), a sulfide blister agent, in a neat state under different humidity conditions. The detoxification performance of G808 toward 2-CEES is significantly enhanced as the content of water present increases. The half-life of 2-CEES decontaminated by G808 can be shortened to 816 s, surpassing those of many other benchmark materials. To confirm the mechanism of catalytic degradation, we used gas chromatography, gas chromatography-mass spectrometry, and theoretical calculations. The findings revealed that hydrolysis was the predominant route. Additionally, granular G808 was reusable and adaptable to high-moisture environments, making it an excellent protective material with practical potential.

Porphyrin-Moiety-Functionalized Metal-Organic Layers Exhibiting Catalytic Capabilities for Detoxifying Nerve Agent and Blister Agent Simulants

The development of very efficient bifunctional catalysts for the simultaneous detoxification of two kinds of the deadliest chemical warfare agents (CWAs), nerve agent and blister agent, is highly desirable. In this study, two porphyrin-based ligands [tetrakis(4-carboxyphenyl) porphyrin (TCPP) and protoporphyrin IX (PPIX)] are introduced into 2D Zr-1,3,5-tris(4-carboxyphenyl)benzene (BTB) metal-organic layers (MOLs), composed of six-connected Zr₆ nodes and the tritopic carboxylate ligand BTB, by a solvent-assisted ligand incorporation method. The loads of TCPP and PPIX are 6.4 and 10.9 wt %, respectively. The detoxification of simulants of the nerve agent and the blister agent was conducted to investigate the catalytic activity of porphyrin-moiety-functionalized MOLs. The reaction half-life of optimal TCPP-functionalized MOL catalyzing the hydrolysis of a nerve agent simulant is only 2.8 min, meanwhile, the half-life of the selective catalytic oxidation of a blister agent simulant is only 1.2 min under LED illumination. More importantly, such a degradation half-life is only about 4 min under natural sunlight (∼60 mW/cm²). To our knowledge, TCPP-functionalized MOL is by far the most efficient catalyst for blister agent simulant degradation under solar light. Therefore, 2D ultrathin MOLs on demand appear to be a promising and efficient material platform for the development of bifunctional catalysts for CWA protection.

Dual-Function Detoxifying Nanofabrics against Nerve Agent and Blistering Agent Simulants

The development of functional materials that can detoxify multiple chemical warfare agents (CWAs) at the same time is of great significance to cope with the uncertainty of CWA use in real-world situations. Although many catalysts capable of detoxifying CWAs have been reported, there is still a lack of effective means to integrate these catalytic-active materials on practical fibers/fabrics to achieve effective protection against coexistence of a variety of CWAs. In this work, by a combination of electrospinning and in situ solvothermal reaction, PAN@Zr(OH)₄@MOF-808 nanofiber membranes were prepared for detoxification of both nerve agent and blistering agent simulants dimethyl 4-nitrophenyl phosphate (DMNP) and 2-chloroethyl ethyl sulfide (CEES). Under the catalytic effect of the MOF-808 component, DMNP hydrolysis with a half-life as short as 1.19 min was achieved. Meanwhile, an 89.3% CEES removal rate was obtained within 12 h by adsorption and catalysis of MOF-808 and Zr(OH)₄ components at ambient conditions, respectively. PAN@Zr(OH)₄@MOF-808 nanofiber membranes also showed a superior blocking effect on CEES compared to bare PAN and PAN@Zr(OH)₄ nanofiber membranes. Simultaneous protection against DMNP and CEES showed effective inhibition of both simulants for at least 2 h. The preparation method also imparted intrinsically good interfacial adhesion between the components, contributing to the excellent recycling stability of PAN@Zr(OH)₄@MOF-808 nanofiber membranes. Therefore, the prepared composite nanofabrics have great application potential, which provides a new idea for the construction of broad-spectrum protective detoxification materials.

Mixed-Linker Isoreticular Zn(II) Metal-Organic Frameworks as Brønsted Acid-Base Bifunctional Catalysts for Knoevenagel Condensation Reactions

Multicomponent metal-organic frameworks (MOFs) have received an increasing amount of attention due to their potential to produce new topologies, pore metrics, and functionalities compared to MOFs with a single metal cluster and one organic linker. Herein, five isoreticular Zn MOFs were obtained by mixing two types of linear ditopic linkers in a one-pot solvothermal synthesis. Interestingly, in the resulting Zn MOFs a six-connected cyclic trinuclear Zn(II) cluster and an eight-connected linear trinuclear Zn(II) cluster coexist, leading to an uncommon (6,8)-connected network. Catalytic activities toward the solvent-free Knoevenagel reactions were observed for all of these MOFs. Further experimental and computational studies suggest that they are Brønsted acid-base bifunctional catalysts. Through chemical modifications of dicarboxylate ligands, including their aromatic backbones and substituents, we have successfully implemented reticular chemistry for the modulations of pore sizes, surface areas, and catalytic performances in a series of four-component isoreticular MOFs.

Aqueous-Phase Destruction of Nerve-Agent Simulants at Copper Single Atoms in UiO-66

Metal-organic frameworks (MOFs) have shown great success in aqueous-phase hydrolysis of nerve agents, with some even showing promise in the gas phase. However, both aqueous-phase reactivity and gas-phase reactivity are hindered because of the binding of the hydrolyzed products to the MOF nodes in a stable, bridging configuration, which limits turnover. Single transition-metal atoms in MOFs have been a growing field of interest for catalytic applications, and single atoms have been proposed to prevent the unwanted bridged conformation and increase catalytic turnover. To date, there has been little experimental evidence to support the hypothesis. Herein, we report two copper single atom-modified UiO-66 MOFs for nerve-agent simulant degradation. Despite the capping of highly active Zr⁴⁺ nodes with fewer Lewis acidic Cuⁿ⁺ atoms, the reactivity of both CuMOFs approaches that of native UiO-66 under aqueous conditions. Computational studies reveal that the Cu coordination environment impairs product inhibition with respect to the native MOF.

Ultrafast Degradation and High Adsorption Capability of a Sulfur Mustard Simulant under Ambient Conditions Using Granular UiO-66-NH2 Metal-Organic Gels

Zirconium-based metal-organic frameworks (Zr-MOFs) have been considered as prospective materials for the degradation of nerve chemical warfare agents (CWAs) but show poor catalytic performance toward blister agents. Moreover, the powder issues and the poor adsorption capability also remain as the major challenges for the application of Zr-MOFs in practical CWA detoxification. Herein, a series of defected granular UiO-66-NH2 metal-organic gels are synthesized via adjusting the amount of added concentrated hydrochloric acid for the decontamination of 2-chloroethyl ethyl sulfide (2-CEES), a sulfur mustard simulant. The half-life of 2-CEES decontaminated by defected granular UiO-66-NH2 metal-organic gels can be shortened to 7.6 min, which is the highest reported value for MOFs under ambient conditions. The mechanism of decontamination is that the amino group on the linkers in UiO-66-NH2 MOGs undergoes a substitution reaction with 2-CEES to yield 2-(2-(ethylthio)ethylamino)terephthalic acid, which is less toxic and fixed in the frameworks. The recycling test corroborates that the granular UiO-66-NH2 xerogels possess good stability and reusability. Static adsorption and desorption tests show that UiO-66-NH2 xerogels possess a high 2-CEES vapor adsorption capacity of 802 mg/g after exposure for 1 d and only 28 wt % desorption capacity after air exposure for 7 d. The dual function of ultrafast degradation and high adsorption capability provide a firm foundation for using UiO-66-NH2 xerogels as a future protection media.

Degradation of G-Type Nerve Agent Simulant with Phase-Inverted Spherical Polymeric-MOF Catalysts

For the neutralization of chemical warfare agents (CWAs), the generation of an effective catalyst that can be handled safely and applied in personal protective equipment is required. Recently, zirconium-based metal-organic frameworks (Zr-MOFs: UiO-66 and UiO-67) have shown great promise in the degradation of CWAs, including nerve agents. Their catalytic activity is owed to the interplay of both Zr(IV) Lewis acids and Lewis basic groups in the MOF structure. The latter act as proximal bases that can interact with CWAs and improve the catalytic activity of Zr-MOFs. The powder form of MOFs, though, makes them impractical catalysts, as it is challenging to handle, regenerate, and reuse them. To address this challenge, we have synthesized three Zr-MOFs with Lewis basic amino and pyridine functionalities and shaped them in spherical polymeric beads using the phase inversion method. Using this method, we can generate beads with many polymer and MOF combinations (MOF@polymer). We controlled the MOF loading in these beads, and scanning electron microscopy images revealed that the MOF crystals are evenly distributed in the polymeric matrix, ensuring effective catalytic activity. We used these beads to degrade dimethyl p-nitrophenyl phosphate (DMNP), a simulant for the G-type nerve agent. Using ³¹P NMR, we showed that UiO-66-NH₂@PES and UiO-67-(NH₂)₂@PES PES: poly(ether sulfone) beads destruct DMNP to dimethyl phosphate (DMP) with a half-life (t_1/2) of 5.09 and 4.34 min, respectively. Beads made of hydrophobic polymers such as poly(vinylidene fluoride) (PVDF), polystyrene (PS), and Zr-MOFs with pyridine functionalities show that the quantitative hydrolysis of DMNP requires more time compared to that seen with the UiO-66-NH₂@PES beads. Our work highlights the facile shaping of MOF powders into beads that can be easily regenerated with their catalytic activity to be maintained for at least three cycles of use.

Effective Degradation of Novichok Nerve Agents by the Zirconium Metal-Organic Framework MOF-808

Novichoks are a novel class of nerve agents (also referred to as the A-series) that were employed in several poisonings over the last few years. This calls for the development of novel countermeasures that can be applied in protective concepts (e.g., protective clothing) or in decontamination methods. The Zr metal-organic framework MOF-808 has recently emerged as a promising catalyst in the hydrolysis of the V- and G-series of nerve agents as well as their simulants. In this paper, we report a detailed study of the degradation of three Novichok agents by MOF-808 in buffers with varying pH. MOF-808 is revealed to be a highly efficient and regenerable catalyst for Novichok agent hydrolysis under basic conditions. In contrast to the V- and G-series of agents, degradation of Novichoks is demonstrated to proceed in two consecutive hydrolysis steps. Initial extremely rapid P-F bond breaking is followed by MOF-catalyzed removal of the amidine group from the intermediate product. The intermediate thus acted as a competitive substrate that was rate-determining for the whole two-step degradation route. Under acidic conditions, the amidine group in Novichok A-230 is more rapidly hydrolyzed than the P-F bond, giving rise to another moderately toxic intermediate. This intermediate could in turn be efficiently hydrolyzed by MOF-808 under basic conditions. These experimental observations were corroborated by density functional theory calculations to shed light on molecular mechanisms.

Synthesis of a UiO-66/g-C3N4 composite using terephthalic acid obtained from waste plastic for the photocatalytic degradation of the chemical warfare agent simulant, methyl paraoxon

In our study, Zr-based UiO-66 (Zr) was synthesized using terephthalic acid obtained from waste plastic. Thereafter, UiO-66/g-C₃N₄ composites were prepared by the solvothermal method, and their photocatalytic activity in the photodegradation of the chemical warfare agent simulant, dimethyl 4-nitrophenyl phosphate (DMNP), was evaluated. The as-synthesized UiO-66/g-C₃N₄ exhibited a high surface area (1440 m² g⁻¹) and a high capillary volume (1.49 cm³ g⁻¹). The UiO-66/g-C₃N₄ samples absorbed a visible light band with bandgap energies of 2.13–2.88 eV. The as-synthesized UiO-66/g-C₃N₄ composites exhibited highly efficient degradation of DMNP with a short half-life (t_1/2 of 2.17 min) at pH 7 under visible light irradiation. The trapping experiments confirmed that the h⁺ and ˙O₂⁻ radicals played an important role in the photocatalytic degradation of DMNP. The UiO-66/g-C₃N₄ catalyst simultaneously performed two processes: the hydrolysis and photocatalytic oxidation of DMNP in water. During irradiation, a p–n heterojunction between UiO-66 and g-C₃N₄ restricted the recombination of photogenerated electrons and holes, resulting in the enhancement in the degradation rate of DMNP.

UiO-66/g-C₃N₄ with a high surface area (1440 m² g⁻¹) and a high capillary volume (1.49 cm³ g⁻¹) exhibited highly efficient degradation of dimethyl 4-nitrophenyl phosphate with t_1/2 = 2.17 min.

Utilizing Zirconium MOF-functionalized Fiber Substrates Prepared by Molecular Layer Deposition for Toxic Gas Capture and Chemical Warfare Agent Degradation

Metal-organic frameworks (MOFs) are a class of porous organic-inorganic solids extensively explored for numerous applications owing to their catalytic activity and high surface area. In this work MOF thin films deposited in a one-step, molecular layer deposition (MLD), an all-gas-phase process, on glass wool fibers are characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and their capabilities towards toxic industrial chemical (TIC) capture and chemical warfare agents (CWA) degradation are investigated. It is shown that despite low volume of the active material used, MOFs thin films are capable of removal of harmful gaseous chemicals from air stream and CWA from neutral aqueous environment. The results confirm that the MLD-deposited MOF thin films, amorphous and crystalline, are suitable materials for use in air filtration, decontamination, and physical protection against CWA and TIC.

Green MIP-202(Zr) Catalyst: Degradation and Thermally Robust Biomimetic Sensing of Nerve Agents

Rapid and robust sensing of nerve agent (NA) threats is necessary for real-time field detection to facilitate timely countermeasures. Unlike conventional phosphotriesterases employed for biocatalytic NA detection, this work describes the use of a new, green, thermally stable, and biocompatible zirconium metal-organic framework (Zr-MOF) catalyst, MIP-202(Zr). The biomimetic Zr-MOF-based catalytic NA recognition layer was coupled with a solid-contact fluoride ion-selective electrode (F-ISE) transducer, for potentiometric detection of diisopropylfluorophosphate (DFP), a F-containing G-type NA simulant. Catalytic DFP degradation by MIP-202(Zr) was evaluated and compared to the established UiO-66-NH₂ catalyst. The efficient catalytic DFP degradation with MIP-202(Zr) at near-neutral pH was validated by ³¹P NMR and FT-IR spectroscopy and potentiometric F-ISE and pH-ISE measurements. Activation of MIP-202(Zr) using Soxhlet extraction improved the DFP conversion rate and afforded a 2.64-fold improvement in total percent conversion over UiO-66-NH₂. The exceptional thermal and storage stability of the MIP-202/F-ISE sensor paves the way toward remote/wearable field detection of G-type NAs in real-world environments. Overall, the green, sustainable, highly scalable, and biocompatible nature of MIP-202(Zr) suggests the unexploited scope of such MOF catalysts for on-body sensing applications toward rapid on-site detection and detoxification of NA threats.

Layer-by-Layer Integration of Zirconium Metal-Organic Frameworks onto Activated Carbon Spheres and Fabrics with Model Nerve Agent Detoxification Properties

We report the controlled synthesis of thin films of prototypical zirconium metal-organic frameworks [Zr₆O₄(OH)₄(benzene-1,4-dicarboxylate-2-X)₆] (X = H, UiO-66 and X = NH₂, UiO-66-NH₂) over the external surface of shaped carbonized substrates (spheres and textile fabrics) using a layer-by-layer method. The resulting composite materials contain metal-organic framework (MOF) crystals homogeneously distributed over the external surface of the porous shaped bodies, which are able to capture an organophosphate nerve agent simulant (diisopropylfluorophosphate, DIFP) in competition with moisture (very fast) and hydrolyze the P-F bond (slow). This behavior confers the composite material self-cleaning properties, which are useful for blocking secondary emission problems of classical protective equipment based on activated carbon.

Effective adsorption of A-series chemical warfare agents on graphdiyne nanoflake: a DFT study

Chemical warfare agents (CWAs) are highly poisonous and their presence may cause diverse effects not only on living organisms but also on environment. Therefore, their detection and removal in a short time span is very important. In this regard, here the utility of graphdiyne (GDY) nanoflake is studied theoretically as an electrochemical sensor material for the hazardous CWAs including A-230, A-232, and A-234. Herein, we explain the phenomenon of adsorption of A-series CWAs on GDY nanoflake within the density functional theory (DFT) framework. The characterisation of adsorption is based on optimised geometries, BSSE-corrected energies, SAPT0, RDG, FMO, CHELPG charge transfer, QTAIM and UV-Vis analyses. The calculated counterpoise adsorption energies for reported complexes range from - 13.70 to - 17.19 kcal mol^-1. These adsorption energies show that analytes are physiosorbed onto GDY which usually takes place through noncovalent interactions. The noncovalent adsorption of CWAs on GDY is also attributed by the SAPT0, RDG and QTAIM analyses. These properties also reveal that dispersion factors dominate in the complexes among many noncovalent components (exchange, induction, electrostatic, steric and repulsion). In order to estimate the sensitivity of GDY, the %sensitivity and average energy gap variations are quantitatively measured by energies of HOMO and LUMO orbitals. In terms of adsorption affinity of GDY, UV-Vis analysis, CHELPG charge transfer and DOS analyses depict an appreciable response towards these toxic CWAs. Graphical abstract.

Photoenhanced Degradation of Sarin at Cu/TiO2 Composite Aerogels: Roles of Bandgap Excitation and Surface Plasmon Excitation

Multifunctional composites that couple high-capacity adsorbents with catalytic nanoparticles (NPs) offer a promising route toward the degradation of organophosphorus pollutants or chemical warfare agents (CWAs). We couple mesoporous TiO₂ aerogels with plasmonic Cu nanoparticles (Cu/TiO₂) and characterize the degradation of the organophosphorus CWA sarin under both dark and illuminated conditions. Cu/TiO₂ aerogels combine high dark degradation rates, which are facilitated by hydrolytically active sites at the Cu||TiO₂ interface, with photoenhanced degradation courtesy of semiconducting TiO₂ and the surface plasmon resonance (SPR) of the Cu nanoparticles. The TiO₂ aerogel provides a high surface area for sarin binding (155 m² g^-1), while the addition of Cu NPs increases the abundance of hydrolytically active OH sites. Degradation is accelerated on TiO₂ and Cu/TiO₂ aerogels with O₂. Under broadband illumination, which excites the TiO₂ bandgap and the Cu SPR, sarin degradation accelerates, and the products are more fully mineralized compared to those of the dark reaction. With O₂ and broadband illumination, oxidation products are observed on the Cu/TiO₂ aerogels as the hydrolysis products subsequently oxidize. In contrast, the photodegradation of sarin on TiO₂ is limited by its slow initial hydrolysis, which limits the subsequent photooxidation. Accelerated hydrolysis occurs on Cu/TiO₂ aerogels under visible illumination (>480 nm) that excites the Cu SPR but not the TiO₂ bandgap, confirming that the Cu SPR excitation contributes to the broadband-driven activity. The high hydrolytic activity of the Cu/TiO₂ aerogels combined with the photoactivity upon TiO₂ bandgap excitation and Cu SPR excitation is a potent combination of hydrolysis and oxidation that enables the substantial chemical degradation of organophorphorus compounds.

Rapid, Biomimetic Degradation of a Nerve Agent Simulant by Incorporating Imidazole Bases into a Metal-Organic Framework

Metal-organic frameworks (MOFs) are excellent catalytic materials for the hydrolytic degradation of nerve agents and their simulants. However, most of the MOF-based hydrolysis catalysts to date are reliant on liquid water media buffered by a volatile liquid base. To overcome this practical limitation, we developed a simple and feasible strategy to synthesize MOF composites that structurally mimic phosphotriesterase's active site as well as its ligated histidine residues. By incorporating imidazole and its derivative into the pores of MOF-808, the obtained MOF composites achieved rapid degradation of a nerve agent simulant (dimethyl-4-nitrophenyl phosphate, DMNP) in pure water as well as in a humid environment without liquid base. Remarkably, one of the composites Im@MOF-808 displayed the highest catalytic activity for DMNP hydrolysis in unbuffered aqueous solutions among all reported MOF-based catalysts. Furthermore, solid-phase catalysis showed that Im@MOF-808 can also rapidly hydrolyze DMNP under high-humidity conditions without bulk water or external bases. This work provides a viable solution toward the implementation of MOF materials into protective equipment for practical nerve agent detoxification.

Decomposition of the Simulant 2-Chloroethyl Ethyl Sulfide Blister Agent under Ambient Conditions Using Metal-Organic Frameworks

Metal organic frameworks (MOFs) have been suggested as promising materials for application in the degradation of chemical warfare agents, with the majority of studies to date focusing on nerve agents. One of the most prominent MOFs used in the detoxification of nerve agents is UiO-66, which is of interest as a future nerve agent decontaminant. However, blister agents, which constitute one of the most toxic and highly reactive categories of chemical agents, are yet to be examined as gas-phase decontamination targets using MOF structures. In this study, a novel type of UiO-66 with a smaller particle size, namely, UiO-66S, was used as a decontaminant for the blister agent simulant, 2-chloroethyl ethyl sulfide (2-CEES). The gas-phase chemical adsorption and decomposition of 2-CEES were demonstrated for the first time, with an estimated t_1/2 of 1.34 h. This value is the highest reported value for an MOF in gas-phase reaction conditions. The obtained nontoxic degradation products were identified, and the reaction mechanism was studied using density functional theory calculations. Furthermore, the synthesized UiO-66S catalyst also exhibits superior catalytic ability toward nerve agent simulants (diisopropyl fluorophosphate).The results of the study provide a firm basis for the use of UiO-66S as a future decontaminant for both nerve and blister agents.

In vitro human skin decontamination efficacy of MOF-808 in decontamination lotion following exposure to the nerve agent VX

Metal-organic frameworks (MOFs) have shown promising properties for removal of chemical warfare agents, in particular for material decontamination and functionalized fabrics. The MOF-properties could also be beneficial for skin decontamination, especially when exposed to highly toxic and low volatile nerve agents. In such exposures, efficient decontamination is crucial for adequate medical management. In the present study, seven zirconium-based MOFs were evaluated for their ability to degrade VX and subsequently tested in vitro for decontamination of VX on human dermatomed skin. Of the MOFs evaluated, MOF-808 showed the greatest ability to degrade VX in an alkaline buffer with complete degradation of VX within 5 min. PCN-777, Zr-NDC and NU-1000 displayed degradation half-lives of approximately 10 min. When including MOF-808 in a skin friendly carrier with slightly acidic pH, a decreased agent degradation rate was observed, requiring over 24 h to reach complete degradation. In skin decontamination experiments, MOF-808 enhanced the efficacy compared to the carrier alone, essentially by improved agent absorption. Adding MOF-808 to Reactive Skin Decontamination Lotion (RSDL) did not improve the high effectiveness of RSDL alone. The present study showed that including MOF in skin decontamination lotions could be beneficial. Further studies should include optimizing the particulates and formulations.

Effect of superabsorbent polymers (SAP) and metal organic frameworks (MOF) wiping sandwich patch on human skin decontamination and detoxification in vitro

Most chemical warfare agents partition rapidly into stratum corneum (SC) and subsequently slowly diffuse through - or are retained in the membrane. Since chemicals can interact with SC components during the process, skin decontamination poses a challenging yet important problem. To address these issues, we have developed a new method in combination with wet and dry decon technologies with new materials for emergency or delayed contamination scenarios. An in vitro human skin diffusion system was employed to model various dermal exposures of radiolabeled chemical warfare simulants, followed by surface decontamination with metal organic frameworks (MOFs), super-absorbent polymers (SAP), and/or dermal decontamination gel (DDGel). All samples measured for radioactive recovery and acetylcholinesterase activity to ascertain relative decon efficacy. Results demonstrated powerful water absorption of SAP, strong catalysis of UiO-66 MOF, and decon enhancement of pre-wetting surface contaminants. SAP had no interfering interactions with MOF yet provided additional benefits as porosity and reactivity that allowed for fast liquidized chemical transportation, absorption, and degeneration. We then designed a cotton-based SAP/MOF patch that worked cooperatively in decontamination and detoxification. Together with pre-wet, SAP/MOF wipe, and DDGel applications, maximum effect was observed in early and/or extended dermal exposure, and no "wash-in" effect occurred.

An alternative material for an effective treatment technique proposal in the light of bibliometric profile of global scientific research on antibiotic resistance and Escherichia coli

Antibiotic resistance is considered by the countries to be a global health issue and a huge threat to public health. The reduction of resistant microorganisms from water/wastewater is of importance in environmental sciences since they are resistant in the aquatic environment. In this study, a bibliometric analysis of literature from the field of environmental science in water ecosystems from 2015 to 2019 was carried out using the keywords "Antibiotic Resistance (AR)" and "Escherichia coli". Furthermore, using the keywords of "Fresh Water," "Sea Water," and "Waste Water," 155, 52, and 57 studies were discovered, respectively. It is found that 217 studies of the total 2115 studies investigated on AR are mostly performed in the "Waste Water" by considering human health. Given the studies, an up-to-date solution should be proposed since the release of antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) from wastewater treatment plants needs to be mitigated. For this reason, it is obvious that working on micro and macro ecosystems will increase the probability of solutions in antibiotic resistance. A discussion of removal techniques for coliform bacteria, particularly antibiotic resistant Escherichia coli, was presented. One of the unique values of this study is to offer an innovative solution that removing them by metal-organic frameworks (MOFs) are emerging crystalline hybrid materials. MOFs are used for environmental, biological, and food antimicrobial substances efficiently. Therefore, we can give inspiration to the future studies of antimicrobial resistance removal via adsorption using MOFs as adsorbents. Graphical Abstract.

Copper-Linked Rotaxanes for the Building of Photoresponsive Metal Organic Frameworks with Controlled Cargo Delivery

We have prepared a photoresponsive metal-organic framework by using an amide-based [2]rotaxane as linker and copper(II) ions as metal nodes. The interlocked linker was obtained by the hydrogen bond-directed approach employing a fumaramide thread as template of the macrocyclic component, this latter incorporating two carboxyl groups. Single crystal X-ray diffraction analysis of the metal-organic framework, prepared under solvothermal conditions, showed the formation of stacked 2D rhombohedral grids forming channels decorated with the interlocked alkenyl threads. A series of metal-organic frameworks differing in the E/Z olefin ratio were prepared either by the previous isomerization of the linker or by postirradiation of the reticulated materials. By dynamic solid state ²H NMR measurements, using deuterium-labeled materials, we proved that the geometry of the olefinic axis of the interlocked struts determined the obtention of materials with different independent local dynamics as a result of the strength of the intercomponent noncovalent interactions. Moreover, the usefulness of these novel copper-rotaxane materials as molecular dosing containers has also been assayed by the diffusion and photorelease of p-benzoquinone, evaluated in different solvents and temperatures.

Artificial Metalloenzymes: Recent Developments and Innovations in Bioinorganic Catalysis

Cellular life is orchestrated by the biochemical components of cells that include nucleic acids, lipids, carbohydrates, proteins, and cofactors such as metabolites and metals, all of which coalesce and function synchronously within the cell. Metalloenzymes allow for such complex chemical processes, as they catalyze a myriad of biochemical reactions both efficiently and selectively, where the metal cofactor provides additional functionality to promote reactivity not readily achieved in their absence. While the past 60 years have yielded considerable insight on how enzymes catalyze these reactions, a need to engineer and develop artificial metalloenzymes has been driven not only by industrial and therapeutic needs, but also by innate human curiosity. The design of miniature enzymes, both rationally and through serendipity, using both organic and inorganic building blocks has been explored by many scientists over the years and significant progress has been made. Herein, recent developments over the past 5 years in areas that have not been recently reviewed are summarized, and prospects for future research in these areas are addressed.

Detoxification Properties of Guanidinylated Chitosan Against Chemical Warfare Agents and Its Application to Military Protective Clothing

This study investigates the detoxification properties of guanidinylated chitosan against chemical warfare agents and its application to the preparation of military protective clothing. Guanidinylated chitosan was synthesized by chitosan guanidinylation with cyanamide. The detoxification properties of the guanidinylated chitosan were then evaluated using a chemical warfare agent simulant, called diisopropylfluorophosphate (DFP). Cotton fabric was treated with 1 wt.% of guanidinylated chitosan in acetic acid and water solution using the simple and conventional textile treatment method of pad–dry–cure. The detoxification properties of the guanidinylated chitosan-treated cotton fabric were evaluated to investigate the application of guanidinylated chitosan to the preparation of military protective clothing. Subsequently, 71.3% of DFP was hydrolyzed to non-hazardous diisopropylhydrogenphosphate (DHP) in 2 h because of the base organocatalytic activity of 0.02 g guanidinylated chitosan itself. Moreover, 60.1% of DFP was hydrolyzed by the catalytic activity of the guanidinylated chitosan-treated cotton fabric, which contained only 0.0002 g of guanidinylated chitosan. This result shows that the guanidinylated chitosan itself has detoxification properties for hydrolyzing DFP to DHP, and its detoxification properties can be more efficient when applied to cotton fabric because it showed 84.3% of the detoxification properties with only 1 wt.% of guanidinylated chitosan. For the first time, this study shows that guanidinylated chitosan has considerable detoxification properties and can be used as an agent to prepare protective clothing.

High-Throughput Screening of MOFs for Breakdown of V-Series Nerve Agents

Metal-organic frameworks (MOFs) have shown promise for the catalytic decomposition of chemical weapons. Finding the best materials for the degradation of nerve agents requires the ability to screen a high number of samples and elucidate the key parameters of effective catalysis. In this work, a high-throughput screening (HTS) method has been developed to evaluate MOFs as catalysts, specifically against the V-class of nerve agents. Over 100 MOFs have been tested using the V-class simulant, O,O-diethyl S-phenyl phosphorothioate (DEPPT), revealing good activity for some UiO-66 derivatives. A medium-throughput hydrolysis assay for the nerve agent O-ethyl S-[2-(diisopropylamino)ethyl]methylphosphonothioate (VX) was also performed using six MOFs selected from HTS and was validated by ³¹P NMR. The results demonstrated that the DEPPT-based assay is a good indicator of V-series agent reactivity and should be considered in addition to the common (4-nitrophenyl)phosphate (DMNP) assay that is used for G-series agents.

Multimodal Characterization of Materials and Decontamination Processes for Chemical Warfare Protection

This Review summarizes the recent progress made in the field of chemical threat reduction by utilizing new in situ analytical techniques and combinations thereof to study multifunctional materials designed for capture and decomposition of nerve gases and their simulants. The emphasis is on the use of in situ experiments that simulate realistic operating conditions (solid-gas interface, ambient pressures and temperatures, time-resolved measurements) and advanced synchrotron methods, such as in situ X-ray absorption and scattering methods, a combination thereof with other complementary measurements (e.g., XPS, Raman, DRIFTS, NMR), and theoretical modeling. The examples presented in this Review range from studies of the adsorption and decomposition of nerve agents and their simulants on Zr-based metal organic frameworks to Nb and Zr-based polyoxometalates and metal (hydro)oxide materials. The approaches employed in these studies ultimately demonstrate how advanced synchrotron-based in situ X-ray absorption spectroscopy and diffraction can be exploited to develop an atomic- level understanding of interfacial binding and reaction of chemical warfare agents, which impacts the development of novel filtration media and other protective materials.

Insights into Catalytic Gas-Phase Hydrolysis of Organophosphate Chemical Warfare Agents by MOF-Supported Bimetallic Metal-Oxo Clusters

Zirconium-based metal-organic frameworks (Zr-MOFs) have been reported to be efficient catalysts for the hydrolysis of organophosphate chemical warfare agents (CWAs) in buffered solutions. However, for the gas-phase reaction, which is more relevant to the situation in a battlefield gas mask application, the kinetics of Zr-MOF catalysts may be severely hindered by strong product inhibition. To improve the catalytic performance, we computationally screened a series of synthetically accessible Zr-MOF-supported bimetallic metal-oxo clusters in which the metal-oxygen-metal active motif is preserved, aiming to find catalysts that have lower binding affinities to the hydrolysis product. For the promising catalyst Al₂O₂(OH)₂@NU-1000 identified from the screening using density functional theory, we mapped out the full reaction pathway of gas-phase dimethyl p-nitrophenolphosphate (DMNP) hydrolysis and analyzed the free energy profile as well as the turnover frequency (TOF). We found that the catalytic mechanism on the new catalyst is slightly different from the one on NU-1000, which also led to a different TOF-limiting step. Additional factors that can affect the overall catalytic performance in practical application, such as the amount of ambient moisture and the existence of acid gases that may poison the catalyst, have also been evaluated.

Defectous UiO-66 MOF Nanocomposites as Reactive Media of Superior Protection against Toxic Vapors

The composites of UiO-66 with nanographite or oxidized graphitic carbon nitride nanospheres (∼10 wt %) were synthesized and used as CEES decontamination media from a vapor phase. The materials were characterized using XRD, nitrogen adsorption, SEM, potentiometric titration, FTIR, and thermal analysis. The results showed a marked improvement of the detoxification capability against the vapors of CEES compared to those of pristine UiO-66, either in terms of the amount adsorbed or surface reactivity. The maximum weight uptake for the composites reached 632 mg g^-1, which was higher than that on UiO-66. The improved adsorption and catalytic activity were linked to the new interface between the modifiers and MOF units/defects, which provided additional active sites formed as a result of modifiers' surface groups acting as MOF linkers. The morphology and porosity were also altered, positively affecting the sites' accessibility and their dispersion in the MOF particles. Dehydrohalogenation and oxidation were the predominant pathways of the composites' surface reactivity. The detoxification mechanisms involving CEES vapor-UiO-66 surface interactions differ from those reported for CEES liquid/dissolved liquid-UiO-66 interactions, and dehydrohalogenation, fragmentation, and oxidation predominate.

Metal-Organic Framework- and Polyoxometalate-Based Sorbents for the Uptake and Destruction of Chemical Warfare Agents

The threat of chemical warfare agents (CWAs), assured by their ease of synthesis and effectiveness as a terrorizing weapon, will persist long after the once-tremendous stockpiles in the U.S. and elsewhere are finally destroyed. As such, soldier and civilian protection, battlefield decontamination, and environmental remediation from CWAs remain top national security priorities. New chemical approaches for the fast and complete destruction of CWAs have been an active field of research for many decades, and new technologies have generated immense interest. In particular, our research team and others have shown metal-organic frameworks (MOFs) and polyoxometalates (POMs) to be active for sequestering CWAs and even catalyzing the rapid hydrolysis of agents. In this Forum Article, we highlight recent advancements made in the understanding and evaluation of POMs and Zr-based MOFs as CWA decontamination materials. Specifically, our aim is to bridge the gap between controlled, solution-phase laboratory studies and real-world or battlefield-like conditions by examining agent-material interactions at the gas-solid interface utilizing a multimodal experimental and computational approach. Herein, we report our progress in addressing the following research goals: (1) elucidating molecular-level mechanisms of the adsorption, diffusion, and reaction of CWA and CWA simulants within a series of Zr-based MOFs, such as UiO-66, MOF-808, and NU-1000, and POMs, including Cs₈Nb₆O₁₉ and (Et₂NH₂)₈[(α-PW₁₁O₃₉Zr(μ-OH)(H₂O))₂]·7H₂O, (2) probing the effects that common ambient gases, such as CO₂, SO₂, and NO₂, have on the efficacy of the MOF and POM materials for CWA destruction, and (3) using CWA simulant results to develop hypotheses for live agent chemistry. Key hypotheses are then tested with targeted live agent studies. Overall, our collaborative effort has provided insight into the fundamental aspects of agent-material interactions and revealed strategies for new catalyst development.

Zirconium-Based Metal-Organic Frameworks for the Catalytic Hydrolysis of Organophosphorus Nerve Agents

Organophoshorus nerve agents are among the most toxic chemicals known to humans, and because of their unfortunate recent use despite international bans, there is an urgent need to develop materials that can effectively degrade these nerve agents. Within the past decade, zirconium-based metal-organic frameworks (Zr-MOFs) have emerged as a bioinspired class of materials capable of rapidly hydrolyzing these compounds and significantly diminishing their toxicity. Both experimental and computational insights have guided the design of Zr-MOFs, leading to the development of catalysts capable of detoxifying nerve agents and simulants, chemicals with similar functionality but lower toxicity, via hydrolysis within seconds in basic aqueous solutions. While these systems are acceptable for the elimination of stockpile weapons, translating this catalytic performance to filters incorporating Zr-MOFs that can be used in masks or protective clothing is not trivial. As such, a large area of focus recently has been targeted toward integrating these hydrolysis catalysts into protective clothing and gear while retaining the performance from solution-based catalytic systems. This Forum Article provides an overview of the development of Zr-MOFs for the catalytic hydrolysis of organophosphorus substrates, including design principles and mechanistic insights for both solution-based and textile-coated systems. Finally, we highlight the remaining challenges yet to be addressed and offer perspectives on the future directions for this field.

Calculations on the unimolecular decomposition of the nerve agent VX

It is very difficult to perform experiments on the physical parameters for the thermal decomposition of chemical nerve agents such as VX and computations, therefore, are useful. The reaction dynamics of the gas-phase pericyclic hydrogen transfer of the nerve agent VX is studied computationally. The geometries of the stationary structures are calculated at M06-2X/jul-cc-pVTZ level of theory. Single point energy calculations are carried out at the CBS/QB3 level to correct the energy barriers. Canonical reaction rate constants are calculated as a function of temperature. The one-dimensional semiclassical transition state theory is used to analyse the quantum tunneling effects. A reduced-dimensional hindered rotor model is proposed, tested, and applied to calculate the vibrational partition functions. It is found that the ester (O-side) and thioester (S-side) side chains of VX undergo pericyclic H-transfer reactions that result in decomposition of the molecule. The S-side reaction is favoured both kinetically and thermodynamically and dominates the pyrolysis over the temperature range from 600 K to 1000 K. It is predicted that VX completely decomposes in 2 s at temperatures above 750 K.

Building MOF Nanocomposites with Oxidized Graphitic Carbon Nitride Nanospheres: The Effect of Framework Geometry on the Structural Heterogeneity

Composite of two MOFs, copper-based Cu-BTC (HKUST-1) and zirconium-based Zr-BDC (UiO-66), with oxidized graphitic carbon nitride nanospheres were synthesized. For comparison, pure MOFs were also obtained. The surface features were analyzed using x-ray diffraction (XRD), sorption of nitrogen, thermal analysis, and scanning electron microscopy (SEM). The incorporation of oxidized g-C₃N₄ to the Cu-BTC framework caused the formation of a heterogeneous material of a hierarchical pores structure, but a decreased surface area when compared to that of the parent MOF. In the case of UiO-66, functionalized nanospheres were acting as seeds around which the crystals grew. Even though the MOF phases were detected in both materials, the porosity analysis indicated that in the case of Cu-BTC, a collapsed MOF/nonporous and amorphous matter was also present and the MOF phase was more defectous than that in the case of UiO-66. The results suggested different roles of oxidized g-C₃N₄ during the composite synthesis, depending on the MOF geometry. While spherical units of UiO-66 grew undisturbed around oxidized and spherical g-C₃N₄, octahedral Cu-BTC units experienced geometrical constraints, leading to more defects, a disturbed growth of the MOF phase, and to the formation of mesopores at the contacts between the spheres and MOF units. The differences in the amounts of CO₂ adsorbed between the MOFs and the composites confirm the proposed role of oxidized g-C₃N₄ in the composite formation.