Highly Efficient Separation of Glycoprotein by Dual-Functional Magnetic Metal-Organic Framework with Hydrophilicity and Boronic Acid Affinity

A dual-recognition strategy based on pH-responsive molecularly imprinted membrane for highly selective capture of catecholamines: From construction to practical application

BACKGROUND

Catecholamines (CAs) are involved in a wide range of physiological and pathological processes in the body and are progressively being used as important biomarkers for a variety of diseases. It is of great significance for accurate quantification of CAs to the diagnosis and treatment of diseases. However, the separation of CAs from complex biological matrices is still a great challenge due to the trace levels of CAs and the limited selectivity of existing pretreatment methods.

RESULTS

In this work, a dual-recognition imprinted membrane (BA-MIM) was developed to utilize the synergistic action of pH-responsive boron affinity and molecular imprinted cavities for highly selective capture and release of CAs. The prepared BA-MIM possessed remarkable adsorption capacity (maximum capacity, 43.3 mg g-1), desirable surface hydrophilicity (46.2°), superior selectivity (IF = 6.2, α = 14.3), as well as favorable reusability (number of cycles, 6 times). On this basis, an integrated analytical method based on BA-MIM extraction combined with ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) was innovatively developed to highly selective separation, enrichment, and detection of CAs in rat brain tissue. Under the optimum conditions, a low quantitation limits (0.05-0.10 ng mL-1), wide linear range (10-1000 ng mL-1), good linearity (r2 > 0.99), and satisfactory recoveries (88.5%-98.5 %) were obtained for CAs. The proven method was further applied to kidney-yang-deficiency-syndrome (KYDS) group rat model, revealed the intrinsic connection between kidney disease and catecholamine metabolism.

SIGNIFICANCE

This work provides an excellent reference paradigm for the effective construction of dual-recognition functional membrane material to the high-selective analysis of trace targets in complex matrices. Additionally, this integrated analytical strategy demonstrates its efficiency, sustainability, versatility, and convenience, showing remarkable prospect in a variety of applications for biological sample analysis.

Surface Modification of Polystyrene with Boronic Acid for Immunoaffinity-Based Cell Enrichment

Obtaining an enriched and phenotypically pure cell population from heterogeneous cell mixtures is important for diagnostics and biosensing. Existing techniques such as fluorescent-activated cell sorting (FACS) and magnetic-activated cell sorting (MACS) require preincubation with antibodies (Ab) and specialized equipment. Cell immunopanning removes the need for preincubation and can be done with no specialized equipment. The majority of the available antibody-mediated analyte capture techniques require a modification to the Abs for binding. In this work, no antibody modification is used because we take advantage of the carbohydrate chain in the Fc region of Ab. We use boronic acid as a cross-linker to bind the Ab to a modified surface. The process allows for functional orientation and cleavable binding of the Ab. In this study, we created an immunoaffinity matrix on polystyrene (PS), an inexpensive and ubiquitous plastic. We observed a 37% increase in Ab binding compared with that of a passive adsorption approach. The method also displayed a more consistent antibody binding with 17 times less variation in Ab loading among replicates than did the passive adsorption approach. Surface topography analysis revealed that a dextran coating reduced nonspecific antibody binding. Elemental analysis (XPS) was used to characterize the surface at different stages and showed that APBA molecules can bind upside-down on the surface. While upside-down antibodies likely remain functional, their elution behavior might differ from those bound in the desired way. Cell capture experiments show that the new surface has 43% better selectivity and 2.4-fold higher capture efficiency compared to a control surface of passively adsorbed Abs. This specific surface chemistry modification will allow the targeted capture of cells or analytes with the option of chemical detachment for further research and characterization.

Bi-functionality of glyoxal caged nucleic acid coupled with CRISPR/Cas12a system for Hg2+ determination

A highly sensitive and selective fluorescence method has been conducted for the detection of Hg2+ based on aminophenylboronic acid-modified carboxyl magnetic beads (CMB@APBA) and CRISPR/Cas12a system mediated by glyoxal caged nucleic acid (gcDNA). As a bi-functional DNA linker, gcDNA offers advantages of simultaneous recognition by boronic acid and complementary DNA/RNA. Under acidic condition, gcDNA can be immobilized on CMB@APBA through the formation of borate ester bond. The formed boric acid-esterified gcDNA can further bind with complementary CRISPR RNA through A-T base pairing to activate Cas12a with kcat/Km ratio of 3.4 × 107 s-1 M-1, allowing for amplified signal. Hg2+ can specifically combine with CMB@APBA, resulting in the release of gcDNA from CMB@APBA and the following inhibition on the activation of CRISPR/Cas12a system around magnetic bead. Under optimal conditions, the method exhibits a linear range from 20 to 250 nM, with a detection limit of 2.72 nM. The proposed method can detect Hg2+ in milk and tea beverages, providing a great significance for on-site monitoring of Hg2+ contamination in food.

Highly efficient determination of trace ascorbic acid in vitamin C tablets by boronate affinity-modified magnetic metal-organic frameworks

Ascorbic acid (AA) plays an important role in many life processes. The chronic nutritional deficiency of AA will lead to the symptoms of scurvy. Therefore, the sensitive quantitative detection of AA is most important in the pharmaceutical analysis, food industry and diagnostic application. In this study, a dual-functional magnetic metal-organic frameworks (Fe3O4@SiO2@UiO-PBA) nanoparticles was synthesized by modifying phenylboronic acid to the surface of magnetic UiO-66-NH2 via postsynthetic modification for selectively and sensitively florescent detection of AA. Due to the abundant amino groups and grafted phenylboronic acid, the proposed nanoparticles have the dual properties of hydrophilicity and boronate affinity. Under optimum conditions, the obtained Fe3O4@SiO2@UiO-PBA nanoparticles can detect AA within 30 s, and has a good linear relationship with the concentration of AA in the range of 5.0-60 μM with a detection limit of 2.5 μM (S/N = 3). In addition, the prepared Fe3O4@SiO2@UiO-PBA nanoparticles showed excellent selectivity and great potential application in the highly efficient determination of trace AA in vitamin C tablets. These results indicated that a convenient method was proposed to develop fluorescent probes for rapid and sensitive detection of trace AA in real samples.

Protein Recognition Based on Temperature-Stimulated Multiparameter Response Virtual Array Sensing Strategy

In the field of array sensing, researchers are committed to miniaturizing array sensing systems while ensuring the acquisition of multiple sensing information. Here, a new strategy called "stimulus responsive array sensing" was presented to obtain virtual multiple sensing without constructing multiple physical sensing units. Based on bioluminescence resonance energy transfer, where luciferase acts as the donor and temperature stimulus response polymers act as the receptors, by using only one sensing unit to output multiple stimulus responsive sensing signals in temperature dimension, an equivalent array sensing could be achieved. This strategy can distinguish and quantify a variety of proteins. More importantly, glucose responsive monomers were doped in polymers; thus, more virtual sensing units can be further increased to obtain more sensing signals, greatly increasing the accuracy of protein recognition, and it can also be used to differentiate several compositions of protein under different glucose concentrations in urine caused by different renal diseases. The results show the potential of the "stimulus responsive array sensing" for analyzing molecular compositions in complex biological systems and show a new tack in array sensing.

Combining multisite functionalized magnetic nanomaterials with interference-free SERS nanotags for multi-target sepsis biomarker detection

Surface-enhanced Raman scattering (SERS) is an ultra-sensitive vibration spectroscopy technology, with the advantages of multi-index and non-destructive quantitative detection, has attracted much attention in the joint detection of biomarkers. A novel SERS biosensor with multisite capture and interference-free quantification was designed for the joint detection of the sepsis biomarker interleukin-6 (IL-6) and procalcitonin (PCT). This biosensor had two interference-free core-shell SERS probes with highly efficient electromagnetic enhancement and a multisite functionalized magnetic nanomaterial with high adsorption capacity. They formed sandwich structure with the targets through boronic affinity and immunoreaction, and the multi-target quantitative analysis of biomarkers in serum was performed using a portable Raman spectrometer in the Raman-silent region. The SERS biosensor was exhibited highly sensitive with detection limits of 0.584 and 2.99 pg/mL for IL-6 and PCT, respectively. In addition, it exhibited excellent selectivity and specificity even with the interference of other proteins. As this SERS method showed excellent performance in the detection of sepsis, it has great potential for multi-index detection in clinical diagnosis of major diseases.

pH-responsive magnetic graphene oxide composite as an adsorbent with high affinity for rapid capture of nucleosides

A novel pH-responsive magnetic graphene oxide composite (MGO@PEI-BA) is proposed for the first time as an adsorbent for the rapid capture and detection of nucleosides (cytidine, uridine, guanosine, and adenosine). The morphology, structure, and magnetic properties of the composite were evaluated using various characterization techniques. The results indicated that the composite was successfully fabricated. A series of parameters that affect extraction and elution were optimized through one-factor-at-a-time and Box-Behnken design of response surface methodology (BBD-RSM). The unique layered structures and easily accessible active sites of the composite facilitated molecular transport, resulting in instantaneous equilibrium of nucleosides adsorption within 5 min. Based on this study, a magnetic dispersive micro-solid-phase extraction (MD-μ-SPE) method assisted by the MGO@PEI-BA was developed in combination with UHPLC-UV analysis for the determination of nucleosides in rat urine. Under the optimum conditions, a wide linear range (10-2000 ng mL-1), good linearity (r > 0.99), low detection limits (1-3 ng mL-1), low relative standard deviations (RSDs ≤ 3.9%), and satisfactory recoveries (82.7-96.3%) were achieved. These results demonstrate that the MGO@PEI-BA is an excellent adsorbent for extracting nucleosides from biological samples.

An ultrasensitive label-free fluorescent aptamer sensor based on pH-gated release coumarin for detect HER2

Evaluation of human epidermal growth factor receptor 2 (HER2) molecular markers is a very suitable option for early diagnosis of breast cancer. Metal-organic frameworks (MOFs) have large porosity and surface interactions such as π-π stacking, electrostatics, hydrogen bonding, and coordination. Here, we integrated the HER2 aptamer and fluorescent probe coumarin (COU) with zeolite imidazolic acid framework-8 (ZIF-8) to construct a label-free fluorescent aptamer sensor with pH-gated release of COU. In the presence of the target-HER2, the aptamer adsorbed on the surface of ZIF-8@COU specifically recognizes and falls off the HER2 protein, exposing a portion of the pore size of ZIF-8@COU while reducing the negative charge on the sensor surface, under alkaline hydrolysis conditions, a large number of COU fluorescent molecules can be produced and released in the detection system.The aptamer fluorescence sensor has good detection performance, sensitivity and low background interference, the detection linearity range of HER2 protein is 0.05-10 ng/mL, the detection limit is 0.0005 ng/mL, and it has good recovery rate for the serum detection of clinical breast cancer patients. Therefore, this sensor has high potential in detecting and monitoring HER2 levels for the care and clinical diagnosis of breast cancer patients.

Surface ligand-assisted synthesis and biomedical applications of metal-organic framework nanocomposites

Metal-organic framework (MOF) nanocomposites have recently gained intensive attention for biosensing and disease therapy applications owing to their outstanding physiochemical properties. However, the direct growth of MOF nanocomposites is usually hindered by the mismatched lattice in the interface between the MOF and other nanocomponents. Surface ligands, molecules with surfactant-like properties, are demonstrated to exhibit the robust capability to modify the interfacial properties of nanomaterials and can be utilized as a powerful strategy for the synthesis of MOF nanocomposites. Besides this, surface ligands also exhibit significant functions in the morphological control and functionalization of MOF nanocomposites, thus greatly enhancing their performance in biomedical applications. In this review, the surface ligand-assisted synthesis and biomedical applications of MOF nanocomposites are comprehensively reviewed. Firstly, the synthesis of MOF nanocomposites is discussed according to the diverse roles of surface ligands. Then, MOF nanocomposites with different properties are listed with their applications in biosensing and disease therapy. Finally, current challenges and further directions of MOF nanocomposites are presented to motivate the development of MOF nanocomposites with elaborate structures, enriched functions, and excellent application prospects.

Ultrasensitive Detection of Multidrug-Resistant Bacteria Based on Boric Acid-Functionalized Fluorescent MOF@COF

The widespread use of antibiotics has made multidrug-resistant bacteria (MDRB) one of the greatest threats toward global health. Current conventional microbial detection methods are usually time-consuming, labor-intensive, expensive, and unable to detect low concentrations of bacteria, which cause great difficulties in clinical diagnosis and treatment. Herein, we constructed a versatile biosensing platform on the basis of boric acid-functionalized porous framework composites (MOF@COF-BA), which were able to realize highly efficient and sensitive label-free MDRB detection via fluorescence. In this design, MDRB were captured using aptamer-coated nanoparticles and the fluorescent probe MOF@COF-BA was tightly anchored onto the surface of MDRB due to interactions between boric acid groups and glycolipids on bacteria cells. Benefitting from the remarkable fluorescence performance of MOF@COF-BA, rapid and specific detection of MDRB, such as methicillin-resistant Staphylococcus aureus (MRSA) and Acinetobacter baumannii (AB), was realized with a detection range of 20-10⁸ CFU/mL (for both) and limits of detection of 7 CFU/mL (MRSA) and 5 CFU/mL (AB). The feasibility of using the developed platform to selectively detect MRSA and AB from complex urine, human serum, and cerebrospinal fluid samples was also demonstrated. This work provides a promising strategy for accurate MDRB diagnosis, avoiding serious infection using rational antibiotic therapy.

Construction of dual-hydrophilic metal-organic framework with hierarchical porous structure for efficient glycopeptide enrichment

As an important role in life activities, it is necessary and important to study protein glycosylation. The pre-enrichment of N-glycopeptides is a significant step in glycoproteomics research. According to the inherent size, hydrophilicity and other properties of N-glycopeptides, affinity materials designed to match them will be able to separate N-glycopeptides from complex samples. In this work, we designed and prepared dual-hydrophilic hierarchical porous metal-organic frameworks (MOFs) nanospheres by metal-organic assembly (MOA) based template method and post-synthesis modification strategy. The hierarchical porous structure significantly improved the diffusion rate and binding sites for N-glycopeptide enrichment. Furthermore, the combination of hydrophilic MOFs and small molecules endowed the as-prepared MOFs nanospheres excellent hydrophilicity, which is conducive to the enrichment of N-glycopeptides based on hydrophilic interaction liquid chromatography (HILIC). Therefore, the nanospheres showed surprising enrichment ability for N-glycopeptides such as excellent selectivity (1/500, human serum immunoglobulin G/bovine serum albumin, m/m) and extremely low detective limitation (0.5 fmol). Meanwhile, 550 N-glycopeptides were identified from rat liver samples, proving its application potential in glycoproteomics research and providing design idea for porous affinity materials.

Isolation of Cytochrome C for Proteomics with Lindqvist-type Polyiodate Modified Metal Organic Framework

Separation and purification of Cytochrome C (Cyt-C) is important for proteomic. High efficient and selective pretreatment method for Cyt-C in real samples are always needed. Herein, polyniobate (K₇H[Nb₆O₁₉]·13H₂O, Nb₆O₁₉) is modified on a metal-organic framework MIL-125(Ti) through intermolecular hydrogen bonds and an aqueous-stable composite Nb₆O₁₉/MIL-125(Ti) is successfully prepared to pretreat complex protein sample. Protein adsorption studies have shown that Nb₆O₁₉/MIL-125(Ti) can promote the selective adsorption of Cyt-C due to the synergistic effect of electrostatic and hydrogen-bond interactions. At pH=10.0 (Britton-Robinson buffer), the adsorption efficiency of 300 μL 100 μg·mL^-1 Cyt-C onto 1.0 mg Nb₆O₁₉/MIL-125(Ti) can reach 99.5%. The adsorption behavior of Cyt-C fits well with the Langmuir adsorption model, corresponding to a maximum theoretical adsorption capacity of 168.35 mg·g^-1. Using 3 mol·L^-1 NaCl as the eluent, a high elution efficiency of 92.19% is obtained. In addition, the results of the sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis confirm that Nb₆O₁₉/MIL-125(Ti) efficiently adsorbed Cyt-C from scrofa heart extraction. LC-MS/MS spectrometry results show that the purification of Cyt-C reduces the abundance from the 12th to the 154th place after Nb₆O₁₉/MIL-125(Ti) treatment. Moreover, low abundant proteins, e.g., Superoxide dismutase 1, IF rod domain-containing protein and Ubiquitin-60S ribosomal protein L40 were considerably enriched. These outcomes confirm the practicability of Nb₆O₁₉/MIL-125 (Ti) as a Cyt-C extractant has potential application value in scrofa heart proteomics.

Functionalization of Mesoporous Silica with a G-A-Mismatched dsDNA Chain for Efficient Identification and Selective Capturing of the MutY Protein

MUTYH adenine DNA glycosylase and its homologous protein (collectively MutY) are typical DNA glycosylases with a [4Fe4S] cluster and a helix-hairpin-helix (HhH) motif in its structure. In the present work, the binding behaviors of the MutY protein to dsDNA containing different base mismatches were investigated. The type and distribution of base mismatch in the dsDNA chain were found to influence the DNA-protein binding interaction greatly. The [4Fe4S] cluster of the MutY protein is able to identify a G-A mismatch in the dsDNA chain specifically by monitoring the anomalies of charge transport in the dsDNA chain, allowing the entrance of the identified dsDNA chain into the internal cavity of the MutY protein and the strong DNA-protein binding at the HhH motif of the protein through multiple H-bonds. The dsDNA chain with a centrally located G-A mismatch is thus functionalized on mesoporous silica (MSN) via amination reaction, and the obtained dsDNA(G-A)@MSN is used as a powerful sorbent for the selective capturing of the MutY protein from complex samples. By using 0.5% NH3·H2O (m/v) as a stripping reagent, efficient isolation of the MutY protein from different cell lines and bacteria is achieved and the recovered MutY protein is demonstrated to maintain favorable DNA adenine glycosylase activity.

Analysis of Viral Spike Protein N-Glycosylation Using Ultraviolet Photodissociation Mass Spectrometry

Characterization of protein glycosylation by tandem mass spectrometry remains challenging owing to the vast diversity of oligosaccharides bound to proteins, the variation in monosaccharide linkage patterns, and the lability of the linkage between the glycan and protein. Here, we have adapted an HCD-triggered-ultraviolet photodissociation (UVPD) approach for the simultaneous localization of glycosites and full characterization of both glycan compositions and intersaccharide linkages, the latter provided by extensive cross-ring cleavages enabled by UVPD. The method is applied to study glycan compositions based on analysis of glycopeptides from proteolytic digestion of recombinant human coronaviruse spike proteins from SARS-CoV-2 and HKU1. UVPD reveals unique intersaccharide linkage information and is leveraged to localize N-linked glycoforms with confidence.

Metal oxide-based macroporous ordered double affinity molecularly imprinted polymer for specific separation and enrichment of glycoprotein from food samples: a co-modification of DMSA and boronate affinity

Metal oxide-based macroporous ordered double affinity molecularly imprinted polymers (D-MIPs) were developed as solid phase extraction (SPE) adsorbents for the specific identification of ovalbumin (OVA) under physiological pH conditions prior to ultraviolet visible (UV-vis) spectrophotometric detection. Herein, macroporous alumina (MA) was used as a matrix; dimercaptosuccinic acid (DMSA) and 3-aminophenylboric acid (APBA) were employed as dual-functional monomers; APBA is a self-polymerizing monomer. The effects of synthesis conditions, SPE conditions as well as selectivity, reproducibility, and reusability were studied. The co-modification of DMSA and boronate affinity renders the adsorbent exhibiting a high adsorption capacity (114.4 mg g^-1) and short equilibrium time (30 min). The surface imprinting technology causes the adsorbent to have high selectivity towards OVA. The OVA recovery range is 91.1-99.6%. This study provides a promising method for the enrichment of OVA and other cis-diol-containing analytes in complex biological samples. A novel metal oxide-based macroporous ordered nanoparticle with a combination of DMSA and boronate affinity was successfully prepared for specific separation and enrichment of glycoprotein from complex biological samples.

Improved detection and recognition of glycoproteins using fluorescent polymers with a molecular imprint based on glycopeptides

Highly specific novel glycopeptide-based fluorescent molecularly imprinting polymers (g-FMIPs) were constructed to recognize and determine the target glycoprotein in complex biological samples. The glycopeptide of ovalbumin (OVA), with the unique structural characteristics of glycan and peptide, and potential application in improving the specificity recognition of g-FMIPs, was selected as the template molecule. The nitrogen-doped graphene quantum dots (N-GQDs) were introduced for fluorescence response. The obtained g-FMIPs possessed rapid binding kinetics and high adsorption capacity. Notably, the g-FMIPs exhibited remarkable selectivity and sensitivity with a high imprinting factor of 6.57, good linearity of 0.625 - 5.00 μM, and limit of detection of 0.208 μM. After treatment with g-FMIPs, the concentration of OVA in eluted solution was 1.07 μM. The obtained recoveries at 1.43 μM, 2.86 μM, and 4.29 μM spiked concentrations were 97.2%, 93.5%, and 101%, respectively, and the relative standard deviations were 2.6%, 4.2%, and 1.1%, respectively. In summary, the proposed strategy will expand the MIPs construction method and its application prospects in precision recognition and sensitive detection of trace glycoproteins from complex biosamples.

Dendrimer-assisted boronate affinity cellulose foams for the efficient and selective separation of glycoproteins

Surfaces engineered to identify and enrich glycoproteins are of considerable interest in the diagnostic and detection fields. A boronate affinity (BA) material was proposed as a potential candidate for the isolation of glycoproteins. However, this material has the disadvantages of low efficiency and non-degradability. Herein, a novel dendrimer-amplified BA cellulose foam (PEI-PBA-CF) was fabricated via a mild two-step approach. The as-prepared PEI-PBA-CF exhibited a rapid adsorption equilibrium rate (within 60 min) and outstanding adsorption capacity for horseradish peroxidase (537.4 mg g^-1) and ovalbumin (495.5 mg g^-1). Furthermore, competitive adsorption experiments demonstrated that PEI-PBA-CF could achieve selective separation and purification of glycoproteins from complex biological samples due to the synergistic effect of the improved BA capacity by the dendrimer and the well-interconnected porous structure of the biomass matrix. Consequently, these cellulose foams might present new application opportunities in analytical and biomedical fields.

Tannic acid-directed synthesis of magnetic and boronic acid-functionalized metal-organic frameworks for selective extraction and quantification of catecholamines in human urine

A novel magnetic borate-functionalized metal-organic framework nanocomposite was designed and fabricated for selective enrichment of catecholamines from human urine. Firstly, the polytannic acid (PTA) layer with natural low-cost and ecofriendly polyphenol tannic acid as the organic ligand and Fe³⁺ as the cross-linker was coated onto the surface of Fe₃O₄. Then, the borate-functionalized metal-organic framework (MIL-100(Fe)-B) with 5-boronobenzene-1,3-dicarboxylic acid as a ligand fragment was modified onto the PTA-coated Fe₃O₄ through a metal-ligand-fragment coassembly strategy. The obtained smart porous adsorbent Fe₃O₄@PTA@MIL-100(Fe)-B was confirmed by means of several characterization methods and then applied as an effective magnetic solid phase extraction (MSPE) sorbent for specific extraction of trace catecholamines in human urine. The Plackett-Burman design was used for screening the variables significantly affecting the extraction efficiency. Then, the significant factors were further investigated by the Box-Behnken design to determine the optimal extraction conditions. Under the optimal conditions, a method for selective MSPE combined with high-performance liquid chromatography with a fluorescence detector for the quantitation of catecholamines in human urine was developed and validated. With the proposed method, the linearity range was from 0.500 to 500 ng mL^-1 for norepinephrine and epinephrine and from 1.00 to 500 ng mL^-1 for dopamine. The detection limits were 0.050, 0.11, and 0.20 ng mL^-1 for norepinephrine, epinephrine, and dopamine, respectively. The recoveries from spiking experiments varied from 91.5 to 108% with relative standard deviations (RSDs) of 0.80-4.8%. The established method is rapid, sensitive, accurate, inexpensive, and ecofriendly and was successfully applied to the determination of the target catecholamines in human urine samples.

Ionic liquid modification of metal-organic framework endows high selectivity for phosphoproteins adsorption

Zr-based metal-organic framework, UiO-66-NH₂, provides favorable adsorption capacity to phosphoproteins, however, it exhibits obvious nonspecific adsorption to other proteins. In the present work, we report a facile strategy to reduce the nonspecific adsorption of nonphosphoproteins by modifying UiO-66-NH₂ with imidazolium ionic liquids (ILs). With respect to bare UiO-66-NH₂, the modified counterpart, UiO@IL, exhibits much improved selectivity to phosphoproteins while maintains comparable adsorption performance. The surface of UiO@IL presents a strong hydrophilicity due to the modification of ILs. Hydrophobic and electrostatic interaction between the absorbent and nonphosphoprotein is significantly reduced. In addition, the interaction between imidazole group of ILs moiety and phosphate group in phosphoprotein ensures the favorable adsorption capacity of UiO@IL for phosphoproteins. Anionic moieties of ILs, i.e., Cl^-, Br^-, BF₄^-, CF₃SO₃^-, play negligible effect in the adsorption process. As a representative, phosphoprotein β-casein (β-ca) is selectively enriched at a mass ratio of BSA:β-ca = 100:1. UiO@IL was further applied for the selective enrichment of phosphoprotein in milk.

Metal-organic frameworks as advanced materials for sample preparation of bioactive peptides

Development of novel affinity materials and separation techniques is crucial for the progress of modern proteomics and peptidomics. Detection of peptides and proteins from complex matrices still remains a challenging task due to the highly complicated biological composition, low abundance of target molecules, and large dynamic range of proteins. As an emerging area of analytical science, metal-organic framework (MOF)-based separation of proteins and peptides is attracting growing interest. This minireview summarizes the recent advances in MOF-based affinity materials for the sample preparation of proteins and peptides. Some newly emerging MOF nanoreactors for the degradation of peptides and proteins are introduced. An update of MOF-based affinity materials for the isolation of glycopeptides, phosphopeptides and low-abundance endogenous peptides in the last two years is focused on. The separation mechanism is discussed along with the chemical structures of MOFs. Finally, the remaining challenges and future development of MOFs in analyzing peptides and proteins in complicated biological samples are discussed.

Boron-Modified Defect-Rich Molybdenum Disulfide Nanosheets: Reducing Nonspecific Adsorption and Promoting a High Capacity for Isolation of Immunoglobulin G

A new type of boric acid derivative-modified molybdenum disulfide nanosheet was prepared by amination and sulfur chemical grafting, where lipoic acid, lysine, and 5-carboxybenzoboroxole were used as reactants. The two-dimensional composite, abbreviated as MoS₂-Lys-CBX, is an ultrathin nanosheet with a minimum unit of single or few layers. Compared with the original molybdenum disulfide, the nonspecific adhesion of interfering proteins on the surface was reduced, and the adsorption capacity of glycoproteins was enhanced, which was 1682.2 mg g^-1 represented by IgG. The adsorbed IgG can be easily eluted with 0.3 wt % CTAB with an elution efficiency of 94.1%. Circular dichroism spectra indicate no obvious conformation change of IgG during the purification process by the MoS₂-Lys-CBX nanosheets. The as-prepared MoS₂-Lys-CBX nanosheets were then employed for the isolation of IgG from human serum sample, obtaining high-purity light and heavy chains of IgG, as demonstrated by SDS-PAGE assays.

A novel Wulff-type boronate acid-functionalized magnetic metal-organic framework imprinted polymer for specific recognition of glycoproteins under physiological pH

Boronate affinity molecularly imprinted materials have been widely used for the separation of glycoproteins under alkaline conditions that is not conducive to the structural stability of the protein. In this work, a kind of novel molecularly imprinted polymer (MIP/TBA/MOF@Fe₃ O₄ ) was prepared via grafting self-assembled molecular team of boronic acids on the surface of the magnetic metal-organic framework core. The teamed boronate affinity was formed by 2-mercaptoethylamine and 4-mercaptophenylboronic acid for specific separation of glycoproteins under physiological pH (pH 7.4). The obtained nanoparticles show high binding capacities (337.8 mg/g), fast adsorption equilibrium time (20 min), and good specificity (imprinting factor, 4.52) for glycoproteins under physiological pH. Furthermore, the prepared imprinted polymer still shows good adsorption capacity for glycoprotein after five times of repeated use, and its adsorption capacity only dropped by 4.7%. More importantly, the prepared nanoparticles have good potential to adsorb glycoproteins from real biological samples.

Isolation and characterization of glycosylated neuropeptides

Glycosylation is one of the most ubiquitous and complex post-translational modifications (PTMs). It plays pivotal roles in various biological processes. Studies at the glycopeptide level are typically considered as a downstream work resulting from enzymatic digested glycoproteins. Less attention has been focused on glycosylated endogenous signaling peptides due to their low abundance, structural heterogeneity and the lack of enabling analytical tools. Here, protocols are presented to isolate and characterize glycosylated neuropeptides utilizing nanoflow liquid chromatography coupled with mass spectrometry (LC-MS). We first demonstrate how to extract neuropeptides from raw tissues and perform further separation/cleanup before MS analysis. Then we describe hybrid MS methods for glycosylated neuropeptide profiling and site-specific analysis. We also include recommendations for data analysis to identify glycosylated neuropeptides in crustaceans where a complete neuropeptide database is still lacking. Other strategies and future directions are discussed to provide readers with alternative approaches and further unravel biological complexity rendered by glycosylation.

Advances in hydrophilic nanomaterials for glycoproteomics

Owing to the formidable challenge posed by microheterogeneities in glycosylation sites, macroheterogeneity of the modification number of glycans, and low abundance and ionization efficiency of glycosylation, the crucial premise for conducting in-depth profiling of the glycoproteome is to develop highly efficient technology for separation and enrichment. The appearance of hydrophilic interaction chromatography (HILIC) has considerably accelerated the progress in glycoproteomics. In particular, additional hydrophilic nanomaterials have been developed for glycoproteomics research in the recent years. In this review, we mainly summarize the recent progresses made in the design and synthesis of different hydrophilic nanomaterials, as well as their applications in glycoproteomics, according to the classification of the main hydrophilic functional molecules on the surface. Further, we briefly illustrate the potential retention mechanism of the HILIC mode and discuss the limits and barriers of hydrophilic nanomaterials in glycoproteomics, as well as propose their possible development trends in the future.

Solvent controlled self-assembly of π-stacked/H-bonded supramolecular organic frameworks from a C3-symmetric monomer for iodine adsorption

Three π-stacked/H-bonded supramolecular organic frameworks (SOFs) with different architectures based on a C₃-symmetric monomer were achieved through tuning the solvent systems.

Boronic acid-functionalized iron oxide magnetic nanoparticles via distillation–precipitation polymerization and thiol–yne click chemistry for the enrichment of glycoproteins

Synthesis of phenylboronic acid functionalized iron oxide nanoparticles for glycoprotein enrichment via distillation–precipitation polymerization combined with thiol–yne click chemistry.