Perovskite/Poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] Bulk Heterojunction for High-Efficient Carbon-Based Large-Area Solar Cells by Gradient Engineering

Superwetting Nanofluids of NiOx-Nanocrystals/CsBr Solution for Fabricating Quality NiOx-CsPbBr3 Gradient Hybrid Film in Carbon-Based Perovskite Solar Cells

The wettability of precursor solution on substrates is the critical factor for fabricating quality film. In this work, superwetting nanofluids (NFs) of non-stoichiometric nickel oxide (NiOx) nanocrystals (NCs)-CsBr solution are first utilized to fabricate quality NiOx-CsPbBr3 hybrid film with gradient-distributed NiOx NCs in the upper part for constructing hole transport ladder in carbon-based perovskite solar cells (C-PSCs). As anticipated, the crystalline properties (improved crystalline grain diameters and reduced impurity phase) and hole extraction/transport of the NiOx-CsPbBr3 hybrid film are improved after incorporating NiOx NCs into CsPbBr3. This originates from the superb wettability of NiOx-CsBr NFs on substrates and the excellent hole-transport properties of NiOx. Consequently, the C-PSCs with the structure of FTO/SnO2/NiOx-CsPbBr3/C displays a power conversion efficiency of 10.07%, resulting in a 23.6% improvement as compared with the pristine CsPbBr3 cell. This work opens up a promising strategy to improve the absorber layer in PSCs by incorporating NCs into perovskite layers through the use of the superwettability of NFs and by composition gradient engineering.

Robust and Efficient Carbon-Based Planar Perovskite Solar Cells with a CsPbBr3-MoS2 Hybrid Absorber

Optical response improvement and hole transport/extraction enhancement are critical to enhancing the power conversion efficiency (PCE) of carbon electrode-based perovskite solar cells (C-PSCs) with an absorber of CsPbBr3. In this study, a multifunctional optimization method by embedding MoS2 nanosheets in CsPbBr3 bulk to construct a perovskite-nanosheet hybrid structure was presented. A CsPbBr3-MoS2 hybrid film was fabricated by two-step spin-coating the precursor solutions of PbBr2 and CsBr-MoS2 under an ambient atmosphere, where the aqueous solution with highly distributed MoS2 nanosheets was applied as a solvent of the hybrid precursor solution. MoS2 nanosheets were utilized as a p-type modifier and extra absorber to hybridize with CsPbBr3 for improving the CsPbBr3-carbon interface and light absorption ability of the perovskite layer. As expected, the optical response ability, absorber film quality, and carrier separation/extraction/transport properties of C-PSCs were enhanced significantly by embedding MoS2 nanosheets in CsPbBr3 film, which resulted in enhanced C-PSCs properties. Finally, the C-PSCs with the structure of FTO/SnO2/CsPbBr3-MoS2/C presented a champion PCE of 7.87% (active area: 1 cm2), which demonstrated excellent ambient and operational stability. This study provides an efficient method for constructing ultrastable C-PSCs by hybridizing perovskite and nanosheets.

Hole-Transport Material Engineering in Highly Durable Carbon-Based Perovskite Photovoltaic Devices

Despite the fast-developing momentum of perovskite solar cells (PSCs) toward flexible roll-to-roll solar energy harvesting panels, their long-term stability remains to be the challenging obstacle in terms of moisture, light sensitivity, and thermal stress. Compositional engineering including less usage of volatile methylammonium bromide (MABr) and incorporating more formamidinium iodide (FAI) promises more phase stability. In this work, an embedded carbon cloth in carbon paste is utilized as the back contact in PSCs (having optimized perovskite composition), resulting in a high power conversion efficiency (PCE) of 15.4%, and the as-fabricated devices retain 60% of the initial PCE after more than 180 h (at the experiment temperature of 85 °C and under 40% relative humidity). These results are from devices without any encapsulation or light soaking pre-treatments, whereas Au-based PSCs retain 45% of the initial PCE at the same conditions with rapid degradation. In addition, the long-term device stability results reveal that poly[bis(4-phenyl) (2,4,6-trimethylphenyl) amine] (PTAA) is a more stable polymeric hole-transport material (HTM) at the 85 °C thermal stress than the copper thiocyanate (CuSCN) inorganic HTM for carbon-based devices. These results pave the way toward modifying additive-free and polymeric HTM for scalable carbon-based PSCs.

Big data driven perovskite solar cell stability analysis

During the last decade lead halide perovskites have shown great potential for photovoltaic applications. However, the stability of perovskite solar cells still restricts commercialization, and lack of properly implemented unified stability testing and disseminating standards makes it difficult to compare historical stability data for evaluating promising routes towards better device stability. Here, we propose a single indicator to describe device stability that normalizes the stability results with respect to different environmental stress conditions which enables a direct comparison of different stability results. Based on this indicator and an open dataset of heterogeneous stability data of over 7000 devices, we have conducted a statistical analysis to assess the effect of different stability improvement strategies. This provides important insights for achieving more stable perovskite solar cells and we also provide suggestions for future directions in the perovskite solar cell field based on big data utilization.

Efficient and Stable Large-Area Perovskite Solar Cells with Inorganic Perovskite/Carbon Quantum Dot-Graded Heterojunction

This work reports on a compositionally graded heterojunction for photovoltaic application by cooperating fluorine-doped carbon quantum dots (FCQDs in short) into the CsPbI2.5Br0.5 inorganic perovskite layer. Using this CsPbI2.5Br0.5/FCQDs graded heterojunction in conjunction with low-temperature-processed carbon electrode, a power conversion efficiency of 13.53% for 1 cm2 all-inorganic perovskite solar cell can be achieved at AM 1.5G solar irradiation. To the best of our knowledge, this is one of the highest efficiency reported for carbon electrode based all-inorganic perovskite solar cells so far, and the first report of 1 cm2 carbon counter electrode based inorganic perovskite solar cell with PCE exceeding 13%. Moreover, the inorganic perovskite/carbon quantum dot graded heterojunction photovoltaics maintained over 90% of their initial efficiency after thermal aging at 85° for 1056 hours. This conception of constructing inorganic perovskite/FCQDs graded heterojunction offers a feasible pathway to develop efficient and stable photovoltaics for scale-up and practical applications.