Polymerization-Induced Cooperative Assembly of Block Copolymer and Homopolymer via RAFT Dispersion Polymerization

Modern Trends in Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) is a powerful and versatile technique for producing colloidal dispersions of block copolymer particles with desired morphologies. Currently, PISA can be carried out in various media, over a wide range of temperatures, and using different mechanisms. This method enables the production of biodegradable objects and particles with various functionalities and stimuli sensitivity. Consequently, PISA offers a broad spectrum of potential commercial applications. The aim of this review is to provide an overview of the current state of rational synthesis of block copolymer particles with diverse morphologies using various PISA techniques and mechanisms. The discussion begins with an examination of the main thermodynamic, kinetic, and structural aspects of block copolymer micellization, followed by an exploration of the key principles of PISA in the formation of gradient and block copolymers. The review also delves into the main mechanisms of PISA implementation and the principles governing particle morphology. Finally, the potential future developments in PISA are considered.

In-depth study of anticancer drug diffusion through a cross-linked -pH-responsive polymeric vesicle membrane

Post-encapsulation and release of the anticancer drug doxorubicin hydrochloride (DOX·HCl) through cell-like transmission functions of polymeric vesicles were studied using cross-linked pH-responsive polymeric vesicles. The vesicles were fabricated for the first time via the redox-initiated reversible addition-fragmentation chain transfer dispersion polymerization in ethanol-water mixture, using 2-(diisopropylamino)ethyl methacrylate and glycidyl methacrylate, and the vesicle membrane was modified post-cross-linking by using ethylenediamine. A phase diagram was constructed for reproducible fabrication of the polymeric vesicles, and well-shaped vesicles were formed when the target degree of polymerization of the hydrophobic polymer chains was equal to or higher than 50 with solid content in the range of 10-30 wt%. The cross-linked vesicle membrane served as a gate enabling "open" and "closed" states in response to pH stimulation. Up to 50% drug loading efficiency and 39% drug loading content could be achieved, and in vitro release of the DOX-loaded vesicles in aqueous buffer solutions showed a much faster DOX release rate at pH 5.0 than at pH 6.5. The polymeric vesicles were of very low cytotoxicity to A549 cells up to the concentration of 2 mg/mL, and the IC₅₀ of DOX-loaded vesicles were higher than that of the free DOX. The intracellular DOX release study indicated higher cellular uptake capability for DOX-loaded vesicles than that of free DOX.

Organic–inorganic hybrid nanomaterials prepared via polymerization-induced self-assembly: recent developments and future opportunities

This review highlights recent developments in the preparation of organic–inorganic hybrid nanomaterials via polymerization-induced self-assembly.

Expanding the Scope of Polymerization-Induced Self-Assembly: Recent Advances and New Horizons

Over the past decade or so, polymerization-induced self-assembly (PISA) has become a versatile method for rational preparation of concentrated block copolymer nanoparticles with a diverse set of morphologies. Much of the PISA literature has focused on the preparation of well-defined linear block copolymers by using linear macromolecular chain transfer agents (macro-CTAs) with high chain transfer constants. In this review, a recent process is highlighted from an unusual angle that has expanded the scope of PISA including i) synthesis of block copolymers with nonlinear architectures (e.g., star block copolymer, branched block copolymer) by PISA, ii) in situ synthesis of blends of polymers by PISA, and iii) utilization of macro-CTAs with low chain transfer constants in PISA. By highlighting these important examples, new insights into the research of PISA and future impact these methods will have on polymer and colloid synthesis are provided.

Type I Photoinitiator-Functionalized Block Copolymer Nanoparticles Prepared by RAFT-Mediated Polymerization-Induced Self-Assembly

Type I photoinitiators have been widely used in UV-vis curing technology for the fabrication of functional polymer materials such as coatings, inks, and adhesives. To overcome the drawbacks of using small molecular type I photoinitiators and expand the potential applications of UV-vis curing technology, attaching type I photoinitiators onto the surface of polymer colloids is an attractive strategy. Here we report a robust strategy for the efficient preparation of type I photoinitiator-functionalized block copolymer nanoparticles with various morphologies via aqueous reversible addition-fragmentation chain transfer (RAFT)-mediated polymerization-induced self-assembly (PISA), in which the photoinitiating ability of the type I photoinitiator end group provides a landscape for further functionalization. These block copolymer nanoparticles could also be used as heterogeneous photoinitiators to generate hydrogels with nanoparticles embedded inside. Significantly, the properties and functionalities of these hydrogels could be further controlled by using different block copolymer nanoparticles. This study provides a robust strategy toward the preparation of type I photoinitiator-functionalized block copolymer nanoparticles with the capacity to be modified with varying functionalities.

Directional effect on the fusion of ellipsoidal morphologies into nanorods and nanotubes

Particle fusion is well-recognized as an important spontaneous process to produce higher-order nanostructures during morphology transition in polymerization-induced self-assembly (PISA). However, to our knowledge, the directional contact, adhesion, and fusion of adjacent nanoparticles have been rarely elucidated in PISA. Herein, a directional fusion of ellipsoidal morphologies was demonstrated during PISA of semi-fluorinated liquid-crystalline (SFLC) block copolymers. The ellipsoidal nanostructures, including micelles and vesicles, preferred to undergo a directional fusion in a head-to-head model, leading to the formation of nanorods and nanotubes, respectively. We believe the directional fusion will offer insightful guidance in PISA to the preparation of complicated functional nanostructures.

Structural Difference in Macro-RAFT Agents Redirects Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) has served as a versatile platform for the large-scale preparation of well-defined block copolymer nano-objects. It appears to be "common sense" that block copolymers with narrow molecular weight distributions are inevitable. In this study, we have conducted the direct comparison of reversible addition-fragmentation transfer (RAFT)-mediated PISA of 2-hydroxypropyl methacrylate (HPMA) using polymethacrylate- and polyacrylate-based macro-RAFT agents. Taking advantage of the poor RAFT controllability of polyacrylate-based macro-RAFT agents with respect to HPMA, uniform submicron-sized polymeric microspheres were prepared by photoinitiated RAFT-mediated PISA of HPMA. The diameter of polymeric microspheres can be precisely controlled by further chain-extension of PHPMA. Finally, uniform epoxy-functionalized multicompartment block copolymer particles (MBCPs) were prepared by a two-step photoinitiated RAFT-mediated PISA with poly(glycidyl methacrylate) (PGlyMA) as the third block. The performance of MBCPs as Pickering emulsifiers was evaluated in detail. This study not only expands the scope of RAFT-mediated PISA for preparing well-defined polymer particles but also provides important insights into the mechanism of RAFT-mediated PISA.

Scalable preparation of alternating block copolymer particles with inverse bicontinuous mesophases

Block copolymer particles with controlled morphologies are of great significance in nanomaterials and nanotechnology. However, ordered inverse morphologies are difficult to achieve due to complex mechanism and formation conditions. Here we report scalable preparation of amphiphilic alternating block copolymer particles with inverse bicontinuous mesophases via polymerization-induced self-assembly (PISA). Concentrated dispersion copolymerizations (up to 40% solid content) of styrene (St) and pentafluorostyrene (PFS) employing a short poly(N,N-dimethylacrylamide) (PDMA29) stabilizer block lead to the formation of well-defined, highly asymmetric PDMA29-b-P(St-alt-PFS)x block copolymers with precise compositions and various morphologies, from simple spheres to ordered inverse cubosome mesophases. The particle morphology is affected by the molecular weight, solid content, and nature of the cosolvents. The cubosome structure is confirmed by electron microscopies and small angle X-ray scattering spectroscopy. This scalable PISA approach offers facile access to ordered inverse mesophases, significantly expanding the PISA morphology scope and enabling its applicability to the materials science fields.

Monodisperse poly(methyl methacrylate) microspheres with tunable carboxyl groups on the surface obtained by photoinitiated RAFT dispersion polymerization

Monodisperse polymeric microspheres with tunable carboxy groups on the surface are prepared by photoinitiated RAFT dispersion polymerization using binary mixtures of two macromolecular chain transfer agents (macro-CTAs).

Synthesis of Light-Responsive Pyrene-Based Polymer Nanoparticles via Polymerization-Induced Self-Assembly

The use of an in situ, one-pot polymerization-induced self-assembly method to synthesize light-responsive pyrene-containing nanoparticles is reported. The strategy is based on the chain extension of a hydrophilic macromolecular chain transfer agent, poly(oligo(ethylene glycol) methyl ether methacrylate), using a light-responsive monomer, 1-pyrenemethyl methacrylate (PyMA), via a reversible addition-fragmentation chain transfer dispersion polymerization; yielding nanoparticles of various morphologies (spherical micelles and worm-like micelles). In this process, addition of comonomers, such as butyl methacrylate (BuMA) or methyl methacrylate (MMA), are required to obtain high PyMA monomer conversion (>80% in 24 h). The addition of comonomers reduces the π-π stacking of the pyrene moieties, which facilitates the diffusion of monomers in the nanoparticle core. The addition of BuMA (as a comonomer) offers P(PyMA-co-BuMA) core-forming chains with high mobility that enables the reorganization of chains and then the evolution of morphology to form vesicles. In contrast, when MMA comonomer is used, kinetically trapped spheres are obtained; this is due to the low mobility of the core-forming chains inhibiting in situ morphological evolution. Finally, the UV-light-induced dissociation of these light-responsive nanoparticles due to the gradual cleavage of the pyrene moieties and the subsequent hydrophobic-to-hydrophilic transitions of the core-forming blocks is demonstrated.

Controlling Nanomaterial Size and Shape for Biomedical Applications via Polymerization-Induced Self-Assembly

Rapid developments in the polymerization-induced self-assembly (PISA) technique have paved the way for the environmentally friendly production of nanoparticles with tunable size and shape for a diverse range of applications. In this feature article, the biomedical applications of PISA nanoparticles and the substantial progress made in controlling their size and shape are highlighted. In addition to early investigations into drug delivery, applications such as medical imaging, tissue culture, and blood cryopreservation are also described. Various parameters for controlling the morphology of PISA nanoparticles are discussed, including the degree of polymerization of the macro-CTA and core-forming polymers, the concentration of macro-CTA and core-forming monomers, the solid content of the final products, the solution pH, the thermoresponsitivity of the macro-CTA, the macro-CTA end group, and the initiator concentration. Finally, several limitations and challenges for the PISA technique that have been recently addressed, along with those that will require further efforts into the future, will be highlighted.

New Insights into RAFT Dispersion Polymerization-Induced Self-Assembly: From Monomer Library, Morphological Control, and Stability to Driving Forces

Polymerization-induced self-assembly (PISA) has been established as an efficient, robust, and versatile approach to synthesize various block copolymer nano-objects with controlled morphologies, tunable dimensions, and diverse functions. The relatively high concentration and potential scalability makes it a promising technique for industrial production and practical applications of functional polymeric nanoparticles. This feature article outlines recent advances in PISA via reversible addition-fragmentation chain transfer dispersion polymerization. Considerable efforts to understand morphological control, broaden the monomer library, enhance morphological stability, and incorporate multiple driving forces in PISA syntheses are summarized herein. Finally, perspectives on the future of PISA research are discussed.

Synthesis of poly(ionic liquid)-based nano-objects with morphological transitionsviaRAFT polymerization-induced self-assembly in ethanol

A full range of morphologies including spheres, worms and vesicles was observed in poly(ionic liquid)-based block copolymer nano-objectsviaethanolic dispersion polymerization.

Self-Assembly of Cellulose Oligomers into Nanoribbon Network Structures Based on Kinetic Control of Enzymatic Oligomerization

The ability to chemically synthesize desired molecules followed by their in situ self-assembly in reaction solution has attracted much attention as a simple and environmentally friendly method to produce self-assembled nanostructures. In this study, α-d-glucose 1-phosphate monomers and cellobiose primers were subjected to cellodextrin phosphorylase-catalyzed reverse phosphorolysis reactions in aqueous solution in order to synthesize cellulose oligomers, which were then in situ self-assembled into crystalline nanoribbon network structures. The average degree-of-polymerization (DP) values of the cellulose oligomers were estimated to be approximately 7-8 with a certain degree of DP distribution. The cellulose oligomers crystallized with the cellulose II allomorph appeared to align perpendicularly to the base plane of the nanoribbons in an antiparallel manner. Detailed analyses of reaction time dependence suggested that the production of nanoribbon network structures was kinetically controlled by the amount of water-insoluble cellulose oligomers produced.

Polymerization-Induced Self-Assembly: The Effect of End Group and Initiator Concentration on Morphology of Nanoparticles Prepared via RAFT Aqueous Emulsion Polymerization

Polymerization-induced self-assembly (PISA) is a widely used technique for the synthesis of nanoparticles with various morphologies including spheres, worms, and vesicles. The development of a PISA formulation based on reversible addition-fragmentation chain transfer (RAFT) aqueous emulsion polymerization offers considerable advantages such as enhanced rate of polymerization, high conversion and environmentally friendly conditions. However, this formulation has typically produced spheres as opposed to worms and vesicles. Herein, we report the formation of vesicle morphology by increasing the RAFT end-group hydrophobicity of the macromolecular chain transfer agent or manipulating the radical initiator concentration used in the aqueous emulsion polymerization PISA formulation. Additionally, decreasing the molecular weight of the hydrophobic polystyrene domain in these vesicles leads to the formation of worms. This work demonstrates that RAFT end-group hydrophobicity and radical initiator concentration are key parameters which can be exploited to enable access to sphere, worm, and vesicle morphologies via the RAFT aqueous emulsion polymerization.

Polymerization-Induced Self-Assembly of Homopolymer and Diblock Copolymer: A Facile Approach for Preparing Polymer Nano-Objects with Higher-Order Morphologies

Polymerization-induced self-assembly of homopolymer and diblock copolymer using a binary mixture of small chain transfer agent (CTA) and macromolecular chain transfer agent (macro-CTA) is reported. With this system, homopolymer and diblock copolymer were formed and chain extended at the same time to form polymer nano-objects. The molar ratio of homopolymer and diblock copolymer had a significant effect on the morphology of the polymer nano-objects. Porous vesicles, porous nanospheres, and micron-sized particles with highly porous inner structure were prepared by this method. We expect that this method will greatly expand the promise of polymerization-induced self-assembly for the synthesis of a range of polymer nano-objects with unique morphologies.

In situ synthesis of a self-assembled AB/B blend of poly(ethylene glycol)-b-polystyrene/polystyrene by dispersion RAFT polymerization

A diblock-copolymer/homopolymer self-assembled blend was synthesized through dispersion RAFT polymerization, and its morphology changed with a decreasing ratio of diblock-copolymer/homopolymer.

Adding a solvophilic comonomer to the polymerization-induced self-assembly of block copolymer and homopolymer: a cooperative strategy for preparing large compound vesicles

We report a RAFT dispersion polymerization of styrene and 4-vinylpyridine in methanol/water at 70 °C. The polymerization was mediated by a binary mixture of DDMAT and mPEG₄₅-DDMAT.

Versatile multicompartment nanoparticles constructed with two thermo-responsive, pH-responsive and hydrolytic diblock copolymers

Multicompartment block copolymer nanoparticles constructed with two smart diblock copolymers are prepared and their versatile morphology upon stimuli is demonstrated.