Mechanistic Origin of the Combined Effect of Surfaces and Mechanical Agitation on Amyloid Formation

Surface effects on functional amyloid formation

Functional amyloids formed by the protein FapC in Pseudomonas bacteria are key structural components of Pseudomonas biofilms, which mediate chronic infections and also contribute to antimicrobial resistance. Here, we combine kinetic experiments with mechanistic modelling to probe the role of surfaces in FapC functional amyloid formation. We find that nucleation of new fibrils is predominantly heterogeneous in vitro, being catalysed by reaction vessel walls but not by the air/water interface. Removal of such interfaces by using microdroplets greatly slows heterogeneous nucleation and reveals a hitherto undetected fibril surface-catalysed "secondary nucleation" reaction step. We tune the degree of catalysis by varying the interface chemistry of the reaction vessel and by adding nanoparticles with tailored surface properties that catalyse fibril nucleation. In so doing, we discover that the rate of nucleation is controlled predominantly by the strength with which FapC binds to the catalytic sites on the interface, and by its surface area. Surprisingly, neither primary nucleation rate nor catalytic site binding strength appear closely correlated to the charge and hydrophilicity of the interface. This indicates the importance of considering experimental design in terms of surface chemistry of the reaction container while also highlighting the notion that fibril nucleation during protein aggregation is a heterogeneous process.

α-Synuclein oligomers form by secondary nucleation

Oligomeric species arising during the aggregation of α-synuclein are implicated as a major source of toxicity in Parkinson's disease, and thus a major potential drug target. However, both their mechanism of formation and role in aggregation are largely unresolved. Here we show that, at physiological pH and in the absence of lipid membranes, α-synuclein aggregates form by secondary nucleation, rather than simple primary nucleation, and that this process is enhanced by agitation. Moreover, using a combination of single molecule and bulk level techniques, we identify secondary nucleation on the surfaces of existing fibrils, rather than formation directly from monomers, as the dominant source of oligomers. Our results highlight secondary nucleation as not only the key source of oligomers, but also the main mechanism of aggregate formation, and show that these processes take place under conditions which recapitulate the neutral pH and ionic strength of the cytosol.

Understanding the Impact of Combined Hydrodynamic Shear and Interfacial Dilatational Stress, on Interface-Mediated Particle Formation for Monoclonal Antibody Formulations

During biomanufacturing, several unit operations expose solutions of biologics to multiple stresses, such as hydrodynamic shear forces due to fluid flow and interfacial dilatational stresses due to mechanical agitation or bubble collapse. When these stresses individually act on proteins adsorbed to interfaces, it results in an increase in protein particles in the bulk solution, a phenomenon referred to as interface-induced protein particle formation. However, an understanding of the dominant cause, when multiple stresses are acting simultaneously or sequentially, on interface-induced protein particle formation is limited. In this work, we established a unique set-up using a peristaltic pump and a Langmuir-Pockels trough to study the impact of hydrodynamic shear stress due to pumping and interfacial dilatational stress, on protein particle formation. Our experimental results together demonstrate that for protein solutions subjected to various combinations of stress (i.e., interfacial and hydrodynamic stress in different sequences), surface pressure values during adsorption and when subjected to compression/dilatational stresses, showed no change, suggesting that the interfacial properties of the protein film are not impacted by pumping. The concentration of protein particles is an order of magnitude higher when interfacial dilatational stress is applied at the air-liquid interface, compared to solutions that are only subjected to pumping. Furthermore, the order in which these stresses are applied, have a significant impact on the concentration of protein particles measured in the bulk solution. Together, these studies conclude that for biologics exposed to multiple stresses throughout bioprocessing and manufacturing, exposure to air-liquid interfacial dilatational stress is the predominant mechanism impacting protein particle formation at the interface and in the bulk solution.

Microfluidic Stress Device to Decouple the Synergistic Effect of Shear and Interfaces on Antibody Aggregation

Protein denaturation and aggregation resulting from the effects of interfacial stress, often enhanced by flow and shear stress, pose significant challenges in the production of therapeutic proteins and monoclonal antibodies. The influence of flow on protein stability is closely intertwined with interfacial effects. In this study, we have developed a microfluidic device capable of exposing low volume (< 320 µL) protein solutions to highly uniform shear. To disentangle the synergistic impact of flow and interfaces on protein aggregation, we fabricated two devices composed of different materials, namely poly(methyl methacrylate) (PMMA) and stainless steel. Upon application of shear, we observed formation of protein particles in the micron-size range. Notably, The number of particles generated in the steel devices was ∼ 3.5 fold lower than in the PMMA device, hinting at an interface-mediated effect. With increasing the protein concentration from 1 to 50 mg/mL we observed a saturation in the amount of aggregates, further confirming the key role of solid-liquid interfaces in inducing particle formation. Introduction of non-ionic surfactants prevented protein aggregation, even at the highest tested protein concentration and low surfactant concentrations of 0.05 mg/mL. Overall, our findings corroborate the synergistic impact of shear and interface effects on protein aggregation. The device developed in this study offers a small-scale platform for assessing the stability of antibody formulations throughout various stages of the development and manufacturing process.

Engineering Core/Ligands Interfacial Anchors of Nanoparticles for Efficiently Inhibiting Both Aβ and Amylin Fibrillization

Accurate construction of artificial nano-chaperones' structure is crucial for precise regulation of protein conformational transformation, facilitating effective treatment of proteopathy. However, how the ligand-anchors of nano-chaperones affect the spatial conformational changes in proteins remains unclear, limiting the development of efficient nano-chaperones. In this study, three types of gold nanoparticles (AuNPs) with different core/ligands interface anchor structures (Au─NH─R, Au─S─R, and Au─C≡C─R, R = benzoic acid) are synthesized as an ideal model to investigate the effect of interfacial anchors on Aβ and amylin fibrillization. Computational results revealed that the distinct interfacial anchors imparted diverse distributions of electrostatic potential on the nanointerface and core/ligands bond strength of AuNPs, leading to differential interactions with amyloid peptides. Experimental results demonstrated that all three types of AuNPs exhibit site-specific inhibitory effects on Aβ40 fibrillization due to preferential binding. For amylin, amino-anchored AuNPs demonstrate strong adsorption to multiple sites on amylin and effectively inhibit fibrillization. Conversely, thiol- and alkyne-anchored AuNPs adsorb at the head region of amylin, promoting folding and fibrillization. This study not only provided molecular insights into how core/ligands interfacial anchors of nanomaterials induce spatial conformational changes in amyloid peptides but also offered guidance for precisely engineering artificial-chaperones' nanointerfaces to regulate the conformational transformation of proteins.

Molecular mechanism of α-synuclein aggregation on lipid membranes revealed

The central hallmark of Parkinson's disease pathology is the aggregation of the α-synuclein protein, which, in its healthy form, is associated with lipid membranes. Purified monomeric α-synuclein is relatively stable in vitro, but its aggregation can be triggered by the presence of lipid vesicles. Despite this central importance of lipids in the context of α-synuclein aggregation, their detailed mechanistic role in this process has not been established to date. Here, we use chemical kinetics to develop a mechanistic model that is able to globally describe the aggregation behaviour of α-synuclein in the presence of DMPS lipid vesicles, across a range of lipid and protein concentrations. Through the application of our kinetic model to experimental data, we find that the reaction is a co-aggregation process involving both protein and lipids and that lipids promote aggregation as much by enabling fibril elongation as by enabling their initial formation. Moreover, we find that the primary nucleation of lipid-protein co-aggregates takes place not on the surface of lipid vesicles in bulk solution but at the air-water and/or plate interfaces, where lipids and proteins are likely adsorbed. Our model forms the basis for mechanistic insights, also in other lipid-protein co-aggregation systems, which will be crucial in the rational design of drugs that inhibit aggregate formation and act at the key points in the α-synuclein aggregation cascade.

Comparison of the Protective Effect of Polysorbates, Poloxamer and Brij on Antibody Stability Against Different Interfaces

Therapeutic proteins and antibodies are exposed to a variety of interfaces during their lifecycle, which can compromise their stability. Formulations, including surfactants, must be carefully optimized to improve interfacial stability against all types of surfaces. Here we apply a nanoparticle-based approach to evaluate the instability of four antibody drugs against different solid-liquid interfaces characterized by different degrees of hydrophobicity. We considered a model hydrophobic material as well as cycloolefin-copolymer (COC) and cellulose, which represent some of the common solid-liquid interfaces encountered during drug production, storage, and delivery. We assess the protective effect of polysorbate 20, polysorbate 80, Poloxamer 188 and Brij 35 in our assay and in a traditional agitation study. While all nonionic surfactants stabilize antibodies against the air-water interface, none of them can protect against hydrophilic charged cellulose. Polysorbates and Brij increase antibody stability in the presence of COC and the model hydrophobic interface, although to a lesser extent compared to the air-water interface, while Poloxamer 188 has a negligible stabilizing effect against these interfaces. These results highlight the challenge of fully protecting antibodies against all types of solid-liquid interfaces with traditional surfactants. In this context, our high-throughput nanoparticle-based approach can complement traditional shaking assays and assist in formulation design to ensure protein stability not only at air-water interfaces, but also at relevant solid-liquid interfaces encountered during the product lifecycle.

Interfacial Adsorption Controls Particle Formation in Antibody Formulations Subjected to Extensional Flows and Hydrodynamic Shear

During their manufacturing and delivery to patients, therapeutic proteins are commonly exposed to various interfaces and to hydrodynamic shear forces. Although adsorption of proteins to solid-liquid interfaces is known to foster formation of protein aggregates and particles, the impact of shear remains controversial, in part because of experimental challenges in separating the effects of shear from those caused by simultaneous exposure to interfaces. Extensional flows (occurring when solutions flow through sudden contractions) exert localized elongational forces that have been suspected to be damaging to proteins. In this work, we measured aggregation and particle formation in formulations of polyclonal and monoclonal antibodies subjected to extensional flow, high shear (105 s-1) and exposure to stainless-steel/water interfaces. Modification of the surface charge at the stainless steel/water interface changed protein adsorption characteristics without altering shear profiles, enabling shear and interfacial interactions to be separated. Even under conditions where antibodies were subjected to high hydrodynamic shear and extensional flow, production of subvisible particles could be inhibited by modifying the stainless-steel surface charge to minimize antibody adsorption. Digital images of particles recorded by flow imaging microscopy (FIM) and analyzed with machine learning algorithms were consistent with a particle formation mechanism by which antibodies adsorb and aggregate at the stainless-steel/water interface and subsequently form particles when shear displaces the interfacial aggregates, transporting them into the bulk solution. Topographical differences measured using atomic force microscopy (AFM) supported the proposed mechanism by showing reduced levels of protein adsorption on surface-charge-modified stainless-steel.

Understanding and controlling the molecular mechanisms of protein aggregation in mAb therapeutics

In antibody development and manufacturing, protein aggregation is a common challenge that can lead to serious efficacy and safety issues. To mitigate this problem, it is important to investigate its molecular origins. This review discusses (1) our current molecular understanding and theoretical models of antibody aggregation, (2) how various stress conditions related to antibody upstream and downstream bioprocesses can trigger aggregation, and (3) current mitigation strategies employed towards inhibiting aggregation. We discuss the relevance of the aggregation phenomenon in the context of novel antibody modalities and highlight how in silico approaches can be exploited to mitigate it.

Nanoparticle-Enhanced RT-QuIC (Nano-QuIC) Diagnostic Assay for Misfolded Proteins

Misfolded proteins associated with various neurodegenerative diseases often accumulate in tissues or circulate in biological fluids years before the clinical onset, thus representing ideal diagnostic targets. Real-time quaking-induced conversion (RT-QuIC), a protein-based seeded-amplification assay, holds great potential for early disease detection, yet challenges remain for routine diagnostic application. Chronic Wasting Disease (CWD), associated with misfolded prion proteins of cervids, serves as an ideal model for evaluating new RT-QuIC methodologies. In this study, we investigate the previously untested hypothesis that incorporating nanoparticles into RT-QuIC assays can enhance their speed and sensitivity when applied to biological samples. We show that adding 50 nm silica nanoparticles to RT-QuIC experiments (termed Nano-QuIC) for CWD diagnostics greatly improves the performance by reducing detection times 2.5-fold and increasing sensitivity 10-fold by overcoming the effect of inhibitors in complex tissue samples. Crucially, no false positives were observed with these 50 nm silica nanoparticles, demonstrating the enhanced reliability and potential for diagnostic application of Nano-QuIC in detecting misfolded proteins.

Artificial intelligence velocimetry reveals in vivo flow rates, pressure gradients, and shear stresses in murine perivascular flows

Quantifying the flow of cerebrospinal fluid (CSF) is crucial for understanding brain waste clearance and nutrient delivery, as well as edema in pathological conditions such as stroke. However, existing in vivo techniques are limited to sparse velocity measurements in pial perivascular spaces (PVSs) or low-resolution measurements from brain-wide imaging. Additionally, volume flow rate, pressure, and shear stress variation in PVSs are essentially impossible to measure in vivo. Here, we show that artificial intelligence velocimetry (AIV) can integrate sparse velocity measurements with physics-informed neural networks to quantify CSF flow in PVSs. With AIV, we infer three-dimensional (3D), high-resolution velocity, pressure, and shear stress. Validation comes from training with 70% of PTV measurements and demonstrating close agreement with the remaining 30%. A sensitivity analysis on the AIV inputs shows that the uncertainty in AIV inferred quantities due to uncertainties in the PVS boundary locations inherent to in vivo imaging is less than 30%, and the uncertainty from the neural net initialization is less than 1%. In PVSs of N = 4 wild-type mice we find mean flow speed 16.33 ± 11.09 µm/s, volume flow rate 2.22 ± 1.983 × 103 µm3/s, axial pressure gradient ( - 2.75 ± 2.01)×10-4 Pa/µm (-2.07 ± 1.51 mmHg/m), and wall shear stress (3.00 ± 1.45)×10-3 Pa (all mean ± SE). Pressure gradients, flow rates, and resistances agree with prior predictions. AIV infers in vivo PVS flows in remarkable detail, which will improve fluid dynamic models and potentially clarify how CSF flow changes with aging, Alzheimer's disease, and small vessel disease.

Agitation does not induce fibrillation in reduced hen egg-white lysozyme at physiological temperature and pH

Several proteins and peptides tend to form an amyloid fibril, causing a range of unrelated diseases, from neurodegenerative to certain types of cancer. In the native state, these proteins are folded and soluble. However, these proteins acquired β-sheet amyloid fibril due to unfolding and aggregation. The conversion mechanism from well-folded soluble into amorphous or amyloid fibril is not well understood yet. Here, we induced unfolding and aggregation of hen egg-white lysozyme (HEWL) by reducing agent dithiothreitol and applied mechanical sheering force by constant shaking (1000 rpm) on the thermostat for 7 days. Our turbidity results showed that reduced HEWL rapidly formed aggregates, and a plateau was attained in nearly 5 h of incubation in both shaking and non-shaking conditions. The turbidity was lower in the shaking condition than in the non-shaking condition. The thioflavin T binding and transmission electron micrographs showed that reduced HEWL formed amorphous aggregates in both conditions. Far-UV circular dichroism results showed that reduced HEWL lost nearly all alpha-helical structure, and β-sheet secondary structure was not formed in both conditions. All the spectroscopic and microscopic results showed that reduced HEWL formed amorphous aggregates under both conditions.

Surface-Induced Protein Aggregation and Particle Formation in Biologics: Current Understanding of Mechanisms, Detection and Mitigation Strategies

Protein stability against aggregation is a major quality concern for the production of safe and effective biopharmaceuticals. Amongst the different drivers of protein aggregation, increasing evidence indicates that interactions between proteins and interfaces represent a major risk factor for the formation of protein aggregates in aqueous solutions. Potentially harmful surfaces relevant to biologics manufacturing and storage include air-water and silicone oil-water interfaces as well as materials from different processing units, storage containers, and delivery devices. The impact of some of these surfaces, for instance originating from impurities, can be difficult to predict and control. Moreover, aggregate formation may additionally be complicated by the simultaneous presence of interfacial, hydrodynamic and mechanical stresses, whose contributions may be difficult to deconvolute. As a consequence, it remains difficult to identify the key chemical and physical determinants and define appropriate analytical methods to monitor and predict protein instability at these interfaces. In this review, we first discuss the main mechanisms of surface-induced protein aggregation. We then review the types of contact materials identified as potentially harmful or detected as potential triggers of proteinaceous particle formation in formulations and discuss proposed mitigation strategies. Finally, we present current methods to probe surface-induced instabilities, which represent a starting point towards assays that can be implemented in early-stage screening and formulation development of biologics.

An Intra-Company Analysis of Inherent Particles in Biologicals Shapes the Protein Particle Mitigation Strategy Across Development Stages

To better understand protein aggregation and inherent particle formation in the biologics pipeline at Novartis, a cross-functional team collected and analyzed historical protein particle issues. Inherent particle occurrences from the past 10 years were systematically captured in a protein particle database. Where the root cause was identified, a number of product attributes (such as development stage, process step, or protein format) were trended. Several key themes were revealed: 1) there was a higher propensity for inherent particle formation with non-mAbs than with mAbs; 2) the majority of particles were detected following manufacturing at scale, and were not predicted by the small-scale studies; 3) most issues were related to visible particles, followed by subvisible particles; 4) 50% of the issues were manufacturing related. These learnings became the foundation of a particle mitigation strategy across development and technical transfer, and resulted in a set of preventive actions. Overall, this study provides further insight into a recognized industry challenge and hopes to inspire the biopharmaceutical industry to transparently share their experiences with inherent particles formation.

A proteome scale study reveals how plastic surfaces and agitation promote protein aggregation

Protein aggregation in biotherapeutics can reduce their activity and effectiveness. It may also promote immune reactions responsible for severe adverse effects. The impact of plastic materials on protein destabilization is not totally understood. Here, we propose to deconvolve the effects of material surface, air/liquid interface, and agitation to decipher their respective role in protein destabilization and aggregation. We analyzed the effect of polypropylene, TEFLON, glass and LOBIND surfaces on the stability of purified proteins (bovine serum albumin, hemoglobin and α-synuclein) and on a cell extract composed of 6000 soluble proteins during agitation (P = 0.1-1.2 W/kg). Proteomic analysis revealed that chaperonins, intrinsically disordered proteins and ribosomes were more sensitive to the combined effects of material surfaces and agitation while small metabolic oligomers could be protected in the same conditions. Protein loss observations coupled to Raman microscopy, dynamic light scattering and proteomic allowed us to propose a mechanistic model of protein destabilization by plastics. Our results suggest that protein loss is not primarily due to the nucleation of small aggregates in solution, but to the destabilization of proteins exposed to material surfaces and their subsequent aggregation at the sheared air/liquid interface, an effect that cannot be prevented by using LOBIND tubes. A guidance can be established on how to minimize these adverse effects. Remove one of the components of this combined stress - material, air (even partially), or agitation - and proteins will be preserved.

Contribution of the 12–17 hydrophobic region of islet amyloid polypeptide in self-assembly and cytotoxicity

The islet amyloid polypeptide (IAPP) is a 37-residue aggregation-prone peptide hormone whose deposition as insoluble fibrils in the islets of Langerhans is associated with type II diabetes. Therapeutic interventions targeting IAPP amyloidogenesis, which contributes to pancreatic β-cell degeneration, remain elusive owing to the lack of understanding of the self-assembly mechanisms and of the quaternary proteospecies mediating toxicity. While countless studies have investigated the contributions of the 20–29 amyloidogenic core in self-assembly, IAPP central region, i.e. positions 11 to 19, has been less studied, notwithstanding its potential key role in oligomerization. In this context, the present study aimed at investigating the physicochemical and conformational properties driving IAPP self-assembly and associated cytotoxicity. Computational tools and all-atom molecular dynamics simulation suggested that the hydrophobic 12–17 segment promotes IAPP self-recognition and aggregation. Alanine scanning revealed that the hydrophobic side chains of Leu12, Phe15 and Val17 are critical for amyloid fibril formation. Destabilization of the α-helical folding by Pro substitution enhanced self-assembly when the pyrrolidine ring was successively introduced at positions Ala13, Asn14 and Phe15, in comparison to respective Ala-substituted counterparts. Modulating the peptide backbone flexibility at position Leu16 through successive incorporation of Pro, Gly and α-methylalanine, inhibited amyloid formation and reduced cytotoxicity, while the isobutyl side chain of Leu16 was not critical for self-assembly and IAPP-mediated toxicity. These results highlight the importance of the 12–17 hydrophobic region of IAPP for self-recognition, ultimately supporting the development of therapeutic approaches to prevent oligomerization and/or fibrillization.

Mechanistic insights into the size-dependent effects of nanoparticles on inhibiting and accelerating amyloid fibril formation

The aggregation of peptides into amyloid fibrils has been linked to ageing-related diseases, such as Alzheimer's and type 2 diabetes. Interfaces, particularly those with large nanostructured surfaces, can affect the kinetics of peptide aggregation, which ranges from complete inhibition to strong acceleration. While a number of physiochemical parameters determine interfacial effects, we focus here on the role of nanoparticle (NP) size and curvature. We used thioflavin T (ThT) fluorescence assays to demonstrate the size-dependent effects of NPs on amyloid fibril formation for the peptides Aβ₄₀, NNFGAIL, GNNQQNY and VQIYVK. While 5 nm gold NPs (AuNP-5) retarded or inhibited the aggregation of all peptides except NNFGAIL, larger 20 nm gold NPs (AuNP-20) tended to accelerate or not influence peptide aggregation. Differences in the NP effects for the peptides resulted from the different peptide properties (size, tendency to aggregate) and associated surface binding affinities. Additional dynamic light scattering (DLS), electron microscopy, and atomic force microscopy (AFM) experiments with the Aβ₄₀ peptide confirmed size-dependent NP effects on peptide aggregation, and also suggested a structural influence on the formed fibrils. NPs can serve as a surface for the adsorption of peptide monomers and enable nucleation to oligomers and fibril formation. However, molecular dynamics (MD) simulations showed that peptide oligomers were less stable at smaller NPs. High surface curvatures destabilized prefibrillar structures, which provides a possible explanation for inhibitory effects on fibril growth, provided that peptide-NP surface binding was relevant for fibril formation. These mechanistic insights can support the design of future nanostructured materials.

Insulin aggregation starts at dynamic triple interfaces, originating from solution agitation

The consequences of agitation on protein stability are particularly relevant to therapeutic proteins. However, the precise contribution of the different effects induced by agitation in pathways leading to protein denaturation and aggregation at interfaces is not entirely understood. In particular, the contribution of a moving triple line, induced by the sweeping of a solution meniscus on a container wall upon agitation, has only been rarely assessed. In this article, we therefore designed experimental setups to analyze how mixing, shear stress, and dynamic triple interfaces influence insulin aggregation in physiological conditions. This has been achieved by controlling agitation speed, shear stress, and the extension of triple interfaces in order to shed light on the contribution of different agitation-induced effects on insulin aggregation in physiological conditions. We demonstrate that strong agitation is necessary for the onset of insulin aggregation, while the growth of the aggregates is sustained even under weak agitation. Kinetic insulin aggregation studies in conditions of intermittent wetting show that the aggregation rate correlates with the amount of dynamic triple interfaces that the proteins are exposed to. Finally, we demonstrate that the triple line, where the protein solution, the air, and a hydrophobic surface meet constitutes a preferential early aggregation site.

The effect of mechanical shocks on the initial aggregation behavior of yeast prion protein Sup35NM

To study the effect of mechanical shocks on the neurodegenerative-related fibril-formation protein, the aggregation process, especially the initial oligomerization of a model yeast prion protein Sup35NM, was followed and analyzed by using a combination of laser light scattering, the Smoluchowski coagulation analysis, Thioflavin T fluorescence assay, and transmission electron microscopy. We find that an initial short-time mechanical shock (ultrasonication or circular shaking) affects the in vitro association kinetics of neurodegenerative-related Sup35NM proteins in dilute PBS solutions by generating a relatively larger number of smaller non-structured oligomers that further serve as tiny "crystallization" seeds in promoting the formation of longer fibrils. Our study provides an effective and quantitative method to investigate the initial oligomerization kinetics of amyloid fibrils formation. Furthermore, the current results may shed light on the molecular understanding on how environmental factors increase the risk of neurodegenerative diseases such as dementia.

Influencing factors and characterization methods of nanoparticles regulating amyloid aggregation

Human disorders associated with amyloid aggregation, such as Alzheimer's disease and Parkinson's disease, afflict the lives of millions worldwide. When peptides and proteins in the body are converted to amyloids, which have a tendency to aggregate, the toxic oligomers produced during the aggregation process can trigger a range of diseases. Nanoparticles (NPs) have been found to possess surface effects that can modulate the amyloid aggregation process and they have potential application value in the treatment of diseases related to amyloid aggregation and fibrillary tangles. In this review, we discuss recent progress relating to studies of nanoparticles that regulate amyloid aggregation. The review focuses on the factors influencing this regulation, which are important as guidelines for the future design of NPs for the treatment of amyloid aggregation. We describe the characterization methods that have been utilized so far in such studies. This review provides research information and characterization methods for the rational design of NPs, which should result in therapeutic strategies for amyloid diseases.

Structural basis for the inhibition of IAPP fibril formation by the co-chaperonin prefoldin

Chaperones, as modulators of protein conformational states, are key cellular actors to prevent the accumulation of fibrillar aggregates. Here, we integrated kinetic investigations with structural studies to elucidate how the ubiquitous co-chaperonin prefoldin inhibits diabetes associated islet amyloid polypeptide (IAPP) fibril formation. We demonstrated that both human and archaeal prefoldin interfere similarly with the IAPP fibril elongation and secondary nucleation pathways. Using archaeal prefoldin model, we combined nuclear magnetic resonance spectroscopy with electron microscopy to establish that the inhibition of fibril formation is mediated by the binding of prefoldin's coiled-coil helices to the flexible IAPP N-terminal segment accessible on the fibril surface and fibril ends. Atomic force microscopy demonstrates that binding of prefoldin to IAPP leads to the formation of lower amounts of aggregates, composed of shorter fibrils, clustered together. Linking structural models with observed fibrillation inhibition processes opens perspectives for understanding the interference between natural chaperones and formation of disease-associated amyloids.

Prebiotically Plausible Autocatalytic Peptide Amyloids

The prebiotic emergence of molecules capable both of self-replication and of storing information was a defining event at the dawn of life. Still, no plausible prebiotic self-replication of biologically relevant molecules has been demonstrated. Building upon the known templating nature of amyloids, we present two systems in which the products of a peptide-bond-forming reaction act as self-replicators to enhance the yield and stereoselectivity of their formation. This first report of an amino acid condensation that can undergo autocatalysis further supports the potential role of amyloids in prebiotic molecular evolution as an environment-responsive and information-coding system capable of self-replication.

Design of Biopharmaceutical Formulations Accelerated by Machine Learning

In addition to activity, successful biological drugs must exhibit a series of suitable developability properties, which depend on both protein sequence and buffer composition. In the context of this high-dimensional optimization problem, advanced algorithms from the domain of machine learning are highly beneficial in complementing analytical screening and rational design. Here, we propose a Bayesian optimization algorithm to accelerate the design of biopharmaceutical formulations. We demonstrate the power of this approach by identifying the formulation that optimizes the thermal stability of three tandem single-chain Fv variants within 25 experiments, a number which is less than one-third of the experiments that would be required by a classical DoE method and several orders of magnitude smaller compared to detailed experimental analysis of full combinatorial space. We further show the advantage of this method over conventional approaches to efficiently transfer historical information as prior knowledge for the development of new biologics or when new buffer agents are available. Moreover, we highlight the benefit of our technique in engineering multiple biophysical properties by simultaneously optimizing both thermal and interface stabilities. This optimization minimizes the amount of surfactant in the formulation, which is important to decrease the risks associated with corresponding degradation processes. Overall, this method can provide high speed of converging to optimal conditions, the ability to transfer prior knowledge, and the identification of new nonlinear combinations of excipients. We envision that these features can lead to a considerable acceleration in formulation design and to parallelization of operations during drug development.

Half-Time Heat Map Reveals Ultrasonic Effects on Morphology and Kinetics of Amyloidogenic Aggregation Reaction

Ultrasonication has been recently adopted in amyloid-fibril assays because of its ability to accelerate fibril formation, being promising in the early stage diagnosis of amyloidoses in clinical applications. Although applications of this technique are expanding in the field of protein science, its effects on the aggregation reactions of amyloidogenic proteins are poorly understood. In this study, we comprehensively investigated the morphology and structure of resultant aggregates, kinetics of fibril formation, and seed-detection sensitivity under ultrasonication using β₂-microglobulin and compared these characteristics under shaking, which has been traditionally adopted in amyloid-fibril assays. To discuss the ultrasonic effects on the amyloid-fibril formation, we propose the half-time heat map, which describes the phase diagram of the aggregation reaction of amyloidogenic proteins. The experimental results show that ultrasonication greatly promotes fibril formation, especially in dilute monomer solutions, induces short-dispersed fibrils, and is capable of detecting ultra-trace-concentration seeds with a detection limit of 10 fM. Furthermore, we indicate that ultrasonication highly alters the energy landscape of an aggregation reaction due to the effect of ultrasonic cavitation. These insights contribute not only to our understanding of the effects of agitation on amyloidogenic aggregation reactions but also to their effective application in the clinical diagnosis of amyloidoses.

An accelerated surface-mediated stress assay of antibody instability for developability studies

High physical stability is required for the development of monoclonal antibodies (mAbs) into successful therapeutic products. Developability assays are used to predict physical stability issues such as high viscosity and poor conformational stability, but protein aggregation remains a challenging property to predict. Among different types of stresses, air–water and solid–liquid interfaces are well known to potentially trigger protein instability and induce aggregation. Yet, in contrast to the increasing number of developability assays to evaluate bulk properties, there is still a lack of experimental methods to evaluate antibody stability against interfaces. Here, we investigate the potential of a hydrophobic nanoparticle surface-mediated stress assay to assess the stability of mAbs during the early stages of development. We evaluate this surface-mediated accelerated stability assay on a rationally designed library of 14 variants of a humanized IgG4, featuring a broad span of solubility values and other developability properties. The assay could identify variants characterized by high instability against agitation in the presence of air–water interfaces. Remarkably, for the set of investigated molecules, we observe strong correlations between the extent of aggregation induced by the surface-mediated stress assay and other developability properties of the molecules, such as aggregation upon storage at 45°C, self-association (evaluated by affinity-capture self-interaction nanoparticle spectroscopy) and nonspecific interactions (estimated by cross-interaction chromatography, stand-up monolayer chromatography (SMAC), SMAC*). This highly controlled surface-mediated stress assay has the potential to complement and increase the ability of the current set of screening techniques to assess protein aggregation and developability potential of mAbs during the early stages of drug development.

Abbreviations:AC-SINS: Affinity-Capture Self-Interaction Nanoparticle Spectroscopy; AMS: Ammonium sulfate precipitation; ANS: 1-anilinonaphtalene-8-sulfonate; CIC: Cross-interaction chromatography; DLS: Dynamic light scattering; HIC: Hydrophobic interaction chromatography; HNSSA: Hydrophobic nanoparticles surface-stress assay; mAb: Monoclonal antibody; NP: Nanoparticle; SEC: Size exclusion chromatography; SMAC: Stand-up monolayer chromatography; WT: Wild type

The effects of nanobubbles on the assembly of glucagon amyloid fibrils

Some recent studies have shown that the surface and interface play an important role in the assembly and aggregation of amyloid proteins. However, it is unclear how the gas-liquid interface affects the protein assembly at the nanometer scale although the presence of gas-liquid interfaces is very common in in vitro experiments. Nanobubbles have a large specific surface area, which provides a stage for interactions with various proteins and peptides on the nanometer scale. In this work, nanobubbles produced in solution were employed for studying the effects of the gas-liquid interface on the assembly of glucagon proteins. Atomic force microscopy (AFM) studies showed that nanobubble-treated glucagon solution formed fibrils with an apparent height of 4.02 ± 0.71 nm, in contrast to the fibrils formed with a height of 2.14 ± 0.53 nm in the control. Transmission electron microscopy (TEM) results also showed that nanobubbles promoted the assembly of glucagon to form more fibrils. Thioflavin T (ThT) fluorescence and Fourier transform infrared (FTIR) analyses indicated that the nanobubbles induced the change of the glucagon conformation to a β-sheet structure. A mechanism that explains how nanobubbles affect the assembly of glucagon amyloid fibrils was proposed based on the above-mentioned experimental results. Given the fact that there are a considerable amount of nanobubbles existing in protein solutions, our results indicate that nanobubbles should be considered for fully understanding the protein aggregation events in vitro.

Sequestration within biomolecular condensates inhibits Aβ-42 amyloid formation

Biomolecular condensates are emerging as an efficient strategy developed by cells to control biochemical reactions in space and time by locally modifying composition and environment. Yet, local increase in protein concentration within these compartments could promote aberrant aggregation events, including the nucleation and growth of amyloid fibrils. Understanding protein stability within the crowded and heterogeneous environment of biological condensates is therefore crucial, not only when the aggregation-prone protein is the scaffold element of the condensates but also when proteins are recruited as client molecules within the compartments. Here, we investigate the partitioning and aggregation kinetics of the amyloidogenic peptide Abeta42 (Aβ-42), the peptide strongly associated with Alzheimer's disease, recruited into condensates based on low complexity domains (LCDs) derived from the DEAD-box proteins Laf1, Dbp1 and Ddx4, which are associated with biological membraneless organelles. We show that interactions between Aβ-42 and the scaffold proteins promote sequestration and local increase of the peptide concentration within the condensates. Yet, heterotypic interactions within the condensates inhibit the formation of amyloid fibrils. These results demonstrate that biomolecular condensates could sequester aggregation-prone proteins and prevent aberrant aggregation events, despite the local increase in their concentration. Biomolecular condensates could therefore work not only as hot-spots of protein aggregation but also as protective reservoirs, since the heterogenous composition of the condensates could prevent the formation of ordered fibrillar aggregates.

Biomolecular condensates sequester an aggregation-prone peptide and prevent its aggregation, showing that heterotypic interactions within the condensates can prevent the formation of amyloid fibrils, despite the local increase in concentration.

The role of water in the primary nucleation of protein amyloid aggregation

The understanding of the complex conformational landscape of amyloid aggregation and its modulation by relevant physicochemical and cellular factors is a prerequisite for elucidating some of the molecular basis of pathology in amyloid related diseases, and for developing and evaluating effective disease-specific therapeutics to reduce or eliminate the underlying sources of toxicity in these diseases. Interactions of proteins with solvating water have been long considered to be fundamental in mediating their function and folding; however, the relevance of water in the process of protein amyloid aggregation has been largely overlooked. Here, we provide a perspective on the role water plays in triggering primary amyloid nucleation of intrinsically disordered proteins (IDPs) based on recent experimental evidences. The initiation of amyloid aggregation likely results from the synergistic effect between both protein intermolecular interactions and the properties of the water hydration layer of the protein surface. While the self-assembly of both hydrophobic and hydrophilic IDPs would be thermodynamically favoured due to large water entropy contributions, large desolvation energy barriers are expected, particularly for the nucleation of hydrophilic IDPs. Under highly hydrating conditions, primary nucleation is slow, being facilitated by the presence of nucleation-active surfaces (heterogeneous nucleation). Under conditions of poor water activity, such as those found in the interior of protein droplets generated by liquid-liquid phase separation, however, the desolvation energy barrier is significantly reduced, and nucleation can occur very rapidly in the bulk of the solution (homogeneous nucleation), giving rise to structurally distinct amyloid polymorphs. Water, therefore, plays a key role in modulating the transition free energy of amyloid nucleation, thus governing the initiation of the process, and dictating the type of preferred primary nucleation and the type of amyloid polymorph generated, which could vary depending on the particular microenvironment that the protein molecules encounter in the cell.

The role of surfaces on amyloid formation

Interfaces can strongly accelerate or inhibit protein aggregation, destabilizing proteins that are stable in solution or, conversely, stabilizing proteins that are aggregation-prone. Although this behaviour is well-known, our understanding of the molecular mechanisms underlying surface-induced protein aggregation is still largely incomplete. A major challenge is represented by the high number of physico-chemical parameters involved, which are highly specific to the considered combination of protein, surface properties, and solution conditions. The key aspect determining the role of interfaces is the relative propensity of the protein to aggregate at the surface with respect to bulk. In this review, we discuss the multiple molecular determinants that regulate this balance. We summarize current experimental techniques aimed at characterizing protein aggregation at interfaces, and highlight the need to complement experimental analysis with theoretical modelling. In particular, we illustrate how chemical kinetic analysis can be combined with experimental methods to provide insights into the molecular mechanisms underlying surface-induced protein aggregation, under both stagnant and agitation conditions. We summarize recent progress in the study of important amyloids systems, focusing on selected relevant interfaces.

Environmental Control of Amyloid Polymorphism by Modulation of Hydrodynamic Stress

The phenomenon of amyloid polymorphism is a key feature of protein aggregation. Unravelling this phenomenon is of great significance for understanding the underlying molecular mechanisms associated with neurodegenerative diseases and for the development of amyloid-based functional biomaterials. However, the understanding of the molecular origins and the physicochemical factors modulating amyloid polymorphs remains challenging. Herein, we demonstrate an association between amyloid polymorphism and environmental stress in solution, induced by an air/water interface in motion. Our results reveal that low-stress environments produce heterogeneous amyloid polymorphs, including twisted, helical, and rod-like fibrils, whereas high-stress conditions generate only homogeneous rod-like fibrils. Moreover, high environmental stress converts twisted fibrils into rod-like fibrils both in-pathway and after the completion of mature amyloid formation. These results enrich our understanding of the environmental origin of polymorphism of pathological amyloids and shed light on the potential of environmentally controlled fabrication of homogeneous amyloid biomaterials for biotechnological applications.

Shear-Induced Amyloid Aggregation in the Brain: V. Are Alzheimer's and Other Amyloid Diseases Initiated in the Lower Brain and Brainstem by Cerebrospinal Fluid Flow Stresses?

Amyloid-β (Aβ) and tau oligomers have been identified as neurotoxic agents responsible for causing Alzheimer's disease (AD). Clinical trials using Aβ and tau as targets have failed, giving rise to calls for new research approaches to combat AD. This paper provides such an approach. Most basic AD research has involved quiescent Aβ and tau solutions. However, studies involving laminar and extensional flow of proteins have demonstrated that mechanical agitation of proteins induces or accelerates protein aggregation. Recent MRI brain studies have revealed high energy, chaotic motion of cerebrospinal fluid (CSF) in lower brain and brainstem regions. These and studies showing CSF flow within the brain have shown that there are two energetic hot spots. These are within the third and fourth brain ventricles and in the neighborhood of the circle of Willis blood vessel region. These two regions are also the same locations as those of the earliest Aβ and tau AD pathology. In this paper, it is proposed that cardiac systolic pulse waves that emanate from the major brain arteries in the lower brain and brainstem regions and whose pulse waves drive CSF flows within the brain are responsible for initiating AD and possibly other amyloid diseases. It is further proposed that the triggering of these diseases comes about because of the strengthening of systolic pulses due to major artery hardening that generates intense CSF extensional flow stress. Such stress provides the activation energy needed to induce conformational changes of both Aβ and tau within the lower brain and brainstem region, producing unique neurotoxic oligomer molecule conformations that induce AD.

Lysozyme Membranes Promoted by Hydrophobic Substrates for Ultrafast and Precise Organic Solvent Nanofiltration

Organic solvent nanofiltration (OSN) is regarded as a promising separation technology in chemical and pharmaceutical industries. However, it remains a great challenge in fabricating OSN membranes with high permeability and precise selectivity by simple, transfer-free, and up-scalable processes. Herein, we report lysozyme nanofilm composite membranes (LNCM) prepared by one-step methods with hydrophobic substrates at the air/water interface. The microporous substrates not only promote the heterogeneous nucleation of amyloid-like lysozyme oligomers to construct small pores in the formed nanofilms but also benefit for the simultaneous composition of LNCM via hydrophobic interactions. The constructed nanopores are reduced to around 1.0 nm, and they are demonstrated by grazing incidence small-angle X-ray scattering with a closely packed model. The LNCM can tolerate most organic polar solvents and the permeability surpasses most of state-of-the-art OSN membranes.

Tracking endocytosis and intracellular distribution of spherical nucleic acids with correlative single-cell imaging

A comprehensive understanding of interactions between nanoparticles (NPs) and biological components is critical to the clinical application of NPs and nanomedicine. Here we provide a step-by-step correlative imaging approach to investigate plasmonic NPs of different aggregation states at the single-cell level. Traceable spherical nucleic acids (SNAs) are fabricated by decorating 50-nm spherical gold NPs with fluorophore-labeled DNA, serving as dually emissive (fluorescent and plasmonic) NPs. The in situ correlative imaging with dark-field microscopy (DFM) and fluorescence microscopy (FM) reveals intracellular distribution of SNAs, whereas DFM combined with scanning electron microscopy (SEM) allows semi-quantification of SNA clustering states in solution. The imaging data are analyzed by ImageJ and a colorimetry-based algorithm written in Python. The clustering states of SNAs in a single cell can be efficiently distinguished within 20 s. This method can be readily installed to monitor real-time endocytosis and cellular distribution of plasmonic NPs of different aggregation states and to quantitatively image targets of interest (e.g., specific DNA, messenger RNA, peptides or proteins) in living cells. The entire procedure can be completed in 3-5 d and requires standard DFM, FM and SEM imaging and data analysis skills and equipment.

The extent of protein hydration dictates the preference for heterogeneous or homogeneous nucleation generating either parallel or antiparallel β-sheet α-synuclein aggregates

α-Synuclein amyloid self-assembly is the hallmark of a number of neurodegenerative disorders, including Parkinson's disease, although there is still very limited understanding about the factors and mechanisms that trigger this process. Primary nucleation has been observed to be initiated in vitro at hydrophobic/hydrophilic interfaces by heterogeneous nucleation generating parallel β-sheet aggregates, although no such interfaces have yet been identified in vivo. In this work, we have discovered that α-synuclein can self-assemble into amyloid aggregates by homogeneous nucleation, without the need of an active surface, and with a preference for an antiparallel β-sheet arrangement. This particular structure has been previously proposed to be distinctive of stable toxic oligomers and we here demonstrate that it indeed represents the most stable structure of the preferred amyloid pathway triggered by homogeneous nucleation under limited hydration conditions, including those encountered inside α-synuclein droplets generated by liquid-liquid phase separation. In addition, our results highlight the key role that water plays not only in modulating the transition free energy of amyloid nucleation, and thus governing the initiation of the process, but also in dictating the type of preferred primary nucleation and the type of amyloid polymorph generated depending on the extent of protein hydration. These findings are particularly relevant in the context of in vivo α-synuclein aggregation where the protein can encounter a variety of hydration conditions in different cellular microenvironments, including the vicinity of lipid membranes or the interior of membraneless compartments, which could lead to the formation of remarkably different amyloid polymorphs by either heterogeneous or homogeneous nucleation.

On the Mechanism of Self-Assembly by a Hydrogel-Forming Peptide

Self-assembling peptide-based hydrogels are a class of tunable soft materials that have been shown to be highly useful for a number of biomedical applications. The dynamic formation of the supramolecular fibrils that compose these materials has heretofore remained poorly characterized. A better understanding of this process would provide important insights into the behavior of these systems and could aid in the rational design of new peptide hydrogels. Here, we report the determination of the microscopic steps that underpin the self-assembly of a hydrogel-forming peptide, SgI_37-49. Using theoretical models of linear polymerization to analyze the kinetic self-assembly data, we show that SgI_37-49 fibril formation is driven by fibril-catalyzed secondary nucleation and that all the microscopic processes involved in SgI_37-49 self-assembly display an enzyme-like saturation behavior. Moreover, this analysis allows us to quantify the rates of the underlying processes at different peptide concentrations and to calculate the time evolution of these reaction rates over the time course of self-assembly. We demonstrate here a new mechanistic approach for the study of self-assembling hydrogel-forming peptides, which is complementary to commonly used materials science characterization techniques.

Thermodynamic and kinetic design principles for amyloid-aggregation inhibitors

Understanding the mechanism of action of compounds capable of inhibiting amyloid-fibril formation is critical to the development of potential therapeutics against protein-misfolding diseases. A fundamental challenge for progress is the range of possible target species and the disparate timescales involved, since the aggregating proteins are simultaneously the reactants, products, intermediates, and catalysts of the reaction. It is a complex problem, therefore, to choose the states of the aggregating proteins that should be bound by the compounds to achieve the most potent inhibition. We present here a comprehensive kinetic theory of amyloid-aggregation inhibition that reveals the fundamental thermodynamic and kinetic signatures characterizing effective inhibitors by identifying quantitative relationships between the aggregation and binding rate constants. These results provide general physical laws to guide the design and optimization of inhibitors of amyloid-fibril formation, revealing in particular the important role of on-rates in the binding of the inhibitors.

Effects of sedimentation, microgravity, hydrodynamic mixing and air-water interface on α-synuclein amyloid formation

The formation of amyloid fibrils is a characterizing feature of a range of protein misfolding diseases, including Parkinson's disease. The propensity of native proteins to form such amyloid fibril, both in vitro and in vivo, is highly sensitive to the surrounding environment, which can alter the aggregation kinetics and fibrillization mechanisms. Here, we investigate systematically the influence of several representative environmental stimuli on α-synuclein aggregation, including hydrodynamic mixing, the presence of an air-water interface and sedimentation. Our results show that hydrodynamic mixing and interfacial effects are critical in promoting several microscopic steps of α-synuclein aggregation and amyloid fibril formation. The presence of an air-water interface under agitation significantly promoted primary nucleation. Secondary processes were facilitated by hydrodynamic mixing, produced by 3D rotation and shaking either in the presence or in the absence of an air-water interface. Effects of sedimentation, as investigated in a microgravity incubator, of α-synuclein lead only to minor changes on the aggregation kinetics rates in comparison to static conditions. These results forward the understanding of α-synuclein fibrillization, paving the way for the development of high-throughput assays for the screening of pharmacological approaches targeting Parkinson's disease.

Inhibiting and catalysing amyloid fibrillation at dynamic lipid interfaces

Proteins are naturally exposed to diverse interfaces in living organisms, from static solid to dynamic fluid. Solid interfaces can enrich proteins as corona, and then catalyze, retard or hinder amyloid fibrillation. But fluid interfaces abundant in biology have rarely been studied for their correlation with protein fibrillation. Unsaturated fatty acids own growing essential roles in diet, whose fluid interfaces are found in vitro to catalyze amyloid fibrillation under certain physiologic conditions. It is determined by the location of double bonds within alkyl chains as well as the presence of physical shear. Docosahexaenoic acid (DHA) shows low catalysis because its unique alkyl chain does not favor to stabilize cross-β nucleus. Mixtures of different fatty acids also decelerate their catalytic activity. High catalysis poses an unprecedented approach to synthesize biologic nanofibrils as one-dimensional (1D) building blocks of functional hybrids. Fibrillation inhibition implied that appropriate diet would be a preventive strategy for amyloid-related diseases. Thus these results may find their significances in diverse fields of science as chemistry, biotechnology, nanotechnology, nutrition, amyloid pathobiology and nanomedicine.

Modification of Serum Albumin by High Conversion of Carboxyl to Amino Groups Creates a Potent Inhibitor of Amyloid β-Protein Fibrillogenesis

Fibrillogenesis of amyloid β-protein (Aβ) has been thought to be implicated in the progression of Alzheimer's disease (AD). Therefore, development of high-efficiency inhibitors is one of the strategies for the prevention and treatment of AD. Serum albumin has been found to capture Aβ monomers through its hydrophobic groove and suppress amyloid formation, but the inhibition efficiency is limited. Inspired by the strong inhibition potency of a basic protein, human lysozyme, we have herein proposed to develop a basified serum albumin by converting carboxyl groups into amino groups with ethylenediamine conjugated on the protein surface. The idea was verified with both bovine and human serum albumins (BSA/HSA). Four basified BSA (BSA-B) preparations with amino modification degrees (MDs) from 8.0 to 41.5 were first synthesized. Extensive biophysical and biological analyses revealed that the inhibition potency significantly increased with increasing amino MD. BSA-B of the highest MD (41.5), BSA-B4, which had an isoelectric point of 9.7, presented strong inhibition on Aβ₄₂ fibrillation at a concentration as low as 0.5 μM, at which it functioned similarly with 25 μM native BSA to impede 25 μM Aβ fibrillation. Cell viability assays also confirmed that the detoxification of 5 μM BSA-B4 was superior over 25 μM native BSA by increasing cell viability from 60.6% to 96.0%. Fluorescence quenching study unveiled the decrease of the binding affinity between Aβ₄₂ and the hydrophobic pocket region of BSA-B4, while quartz crystal microbalance experiments demonstrated that the binding constant of BSA-B4 to Aβ₄₂ increased nearly 5 times. Therefore, the increase of electrostatic interactions between BSA-B4 and Aβ₄₂ was the main reason for its high potency. Hence, aminated BSA achieved a conversion of binding way to Aβ from a mainly single-site hydrophobic binding to multiregional electrostatic interactions. Similar results were obtained with basified HSA preparations on inhibiting the amyloid formation and cytotoxicity. This work has thus provided new insights into the development of more efficient protein-based inhibitors against Aβ fibrillogenesis.

Identification of a hinge residue controlling islet amyloid polypeptide self-assembly and cytotoxicity

The islet amyloid polypeptide (IAPP) is a 37-residue peptide hormone whose deposition as amyloid fibrils in the pancreatic islets is associated with type 2 diabetes. Previous studies have suggested that residue Asn-21 plays a critical role in the in vitro self-assembly of IAPP. Herein, we studied structure-self-assembly relationships focusing on position 21 to gain detailed insights into the molecular mechanisms of IAPP self-assembly and to probe the conformational nature of the toxic assemblies associated with β-cell death. Thioflavin T (ThT) fluorescence, CD spectroscopy, and transmission EM analysis revealed that the Asn-21 amide side chain is not required for IAPP nucleation and amyloid elongation, as N21A and N21G variants assembled into prototypical fibrils. In contrast, Asn-21 substitution with the conformationally constrained and turn-inducing residue Pro accelerated IAPP self-assembly. Successive substitutions with hydrophobic residues led to the formation of ThT-negative β-sheet-rich aggregates having high surface hydrophobicity. Cell-based assays revealed no direct correlation between the in vitro amyloidogenicity of these variants and their toxicity. In contrast, leakage of anionic lipid vesicles disclosed that membrane disruption is closely associated with cytotoxicity. We observed that the N21F variant self-assembles into worm-like aggregates, causing loss of lipid membrane structural integrity and inducing β-cell apoptosis. These results indicate that specific intra- and intermolecular interactions involving Asn-21 promote IAPP primary nucleation events by modulating the conformational conversion of the oligomeric intermediates into amyloid fibrils. Our study identifies position 21 as a hinge residue that modulates IAPP amyloidogenicity and cytotoxicity.

Unified theoretical description of the kinetics of protein aggregation

Solution conditions chosen for the production of amyloid can also promote formation of significant extents of amorphous protein aggregate. In one interpretation, the amyloid and amorphous aggregation pathways are considered to be in competition with each other. An alternative conceptualization involves considering amorphous aggregation as an obligatory intermediate process of the amyloid formation pathway. Here, we review recently developed macroscopic-level theories of protein aggregation that unify these two competing models into a single paradigm. Key features of the unified model included (1) a description of the amorphous aggregate as a second liquid phase with the degree of liquid-like character determined by the mobility of the monomer within it, and (2) heterogeneous growth pathways based on nucleation, growth, and fragmentation of amyloid occurring within different phases and at their interfacial boundary. Limiting-case behaviors of the protein aggregation reaction, either singly involving amyloid or amorphous aggregate production, and mixed-case behaviors, involving competitive and/or facilitated growth of amorphous and amyloid species, are presented and reviewed in context. This review principally describes an approach developed by Hirota and Hall 2019 (Hirota, N. and Hall, D. 2019. Protein Aggregation Kinetics: A Unified Theoretical Description. Chapter 7 of 'Protein Solubility and Amorphous Aggregation: From Academic Research to Applications in Drug Discovery and Bioindustry' edited by Y. Kuroda and F. Arisaka. CMC Publishers). Sections of that work are translated from the original Japanese and republished here with the full permission of CMC Publishing Corporation.

Sensitivity analysis of the variability of amyloid aggregation profiles

The variability of amyloid aggregation profiles is linearly proportional to the duration of the aggregation process, and arises from a perturbation of one or more of the initial conditions.

Impact of nanoparticles on amyloid peptide and protein aggregation: a review with a focus on gold nanoparticles

Society is increasingly exposed to nanoparticles as they are ubiquitous in nature and introduced as man-made air pollutants and as functional ingredients in cosmetic products as well as in nanomedicine. Nanoparticles differ in size, shape and material properties. In addition to their intended function, the side effects on biochemical processes in organisms remain unclear. Nanoparticles can significantly influence the nucleation and aggregation process of peptides. The development of several neurodegenerative diseases, such as Alzheimer's disease, is related to the aggregation of peptides into amyloid fibrils. However, there is no comprehensive or universal mechanism to predict or explain apparent acceleration or inhibition of these aggregation processes. In this work, selected studies and possible mechanisms for amyloid peptide nucleation and aggregation, in the presence of nanoparticles, are highlighted. These studies are discussed in the context of recent data from our group on the role of gold nanoparticles in amyloid peptide aggregation using experimental methods and large-scale molecular dynamics simulations. A complex interplay of the surface properties of the nanoparticles, the properties of the peptides, as well as the resulting forces between both the nanoparticles and the peptides, appear to determine whether amyloid peptide aggregation is influenced, catalysed or inhibited by the presence of nanoparticles.