Controlling Interlayer Spacing of Graphene Oxide Membranes by External Pressure Regulation

Unraveling the Atomistic Mechanisms Underlying Effective Reverse Osmosis Filtration by Graphene Oxide Membranes

The graphene oxide (GO) membrane displays promising potential in efficiently filtering ions from water. However, the precise mechanism behind its effectiveness remains elusive, particularly due to the lack of direct experimental evidence at the atomic scale. To shed light on this matter, state-of-the-art techniques are employed such as integrated differential phase contrast-scanning transmission electron microscopy and electron energy loss spectroscopy, combined with reverse osmosis (RO) filtration experiments using GO membranes. The atomic-scale observations after the RO experiments directly reveal the binding of various ions including Na+, K+, Ca2+, and Fe3+ to the defects, edges, and functional groups of GO. The remarkable ion-sieving capabilities of GO membranes are confirmed, which can be attributed to a synergistic interplay of size exclusion, electrostatic interactions, cation-π, and other non-covalent interactions. Moreover, GO membranes modified by external pressure and cation also demonstrated further enhanced filtration performance for filtration. This study significantly contributes by uncovering the atomic-scale mechanism responsible for ion sieving in GO membranes. These findings not only enhance the fundamental understanding but also hold substantial potential for the advancement of GO membranes in reverse osmosis (RO) filtration.

Reversible Constrained Dissociation and Reassembly of MXene Films

Enabling materials to undergo reversible dynamic transformations akin to the behaviors of living organisms represents a critical challenge in the field of material assembly. The pursuit of such capabilities using conventional materials has largely been met with limited success. Herein, the discovery of reversible constrained dissociation and reconfiguration in MXene films, offering an effective solution to overcome this obstacle is reported. Specifically, MXene films permit rapid intercalation of water molecules between their distinctive layers, resulting in a significant expansion and exhibiting confined dissociation within constrained spaces. Meanwhile, the process of capillary compression driven by water evaporation reinstates the dissociated MXene film to its original compact state. Further, the adhesive properties emerging from the confined disassociation of MXene films can spontaneously induce fusion between separate films. Utilizing this attribute, complex structures of MXene films can be effortlessly foamed and interlayer porosity precisely controlled, using only water as the inducer. Additionally, a parallel phenomenon has been identified in graphene oxide films. This work not only provides fresh insights into the microscopic mechanisms of 2D materials such as MXene but also paves a transformative path for their macroscopic assembly applications in the future.

Comparative Retention Analysis of Intercalated Cations Inside the Interlayer Gallery of Lamellar and Nonlamellar Graphene Oxide Membranes in Reverse Osmosis Process: A Molecular Dynamics Study

Over the past decade, multilayered graphene oxide (GO) membranes have emerged as promising candidates for desalination applications. Despite their potential, a comprehensive understanding of separation mechanisms remains elusive due to the intricate morphology and structural arrangement of interlayer galleries. Moreover, a critical concern of multilayered GO membranes is their susceptibility to swelling within aqueous environments, which hinders their practical implementation. Therefore, this study introduces cation intercalation within GO laminates to elucidate the underlying factors governing swelling behavior and subsequently mitigate it. Moreover, this study performed nonequilibrium molecular dynamics simulations on the cation (Mg2+ or K+)-intercalated lamellar and nonlamellar GO membranes to understand the effect of the arrangement of GO sheets on the retention time of intercalated cations within GO layers, water permeance, and salt rejection mechanism in the reverse osmosis process using cation-intercalated GO membranes. Our results highlight that lamellar GO membranes exhibit higher water permeance, attributed to their well-defined interlayer gallery structure. On the other hand, nonlamellar GO membranes display superior salt rejection due to their complex interlayer gallery structure that impedes salt permeation. Moreover, the structural complexity of nonlamellar GO membranes contributes to greater stability by retention of the more intercalated cations for a longer time within the layers. Furthermore, it is observed that a higher percentage of Mg2+ cations remained inside the GO laminates as compared to K+ cations, hence resulting in the greater stability of the Mg2+-intercalated GO membrane in the aqueous environment.

Reduction-enhanced water flux through layered graphene oxide (GO) membranes stabilized with H3O+ and OH- ions

Graphene oxide (GO) is one of the most promising candidates for next generation of atomically thin membranes. Nevertheless, one of the major issues for real world application of GO membranes is their undesirable swelling in an aqueous environment. Recently, we demonstrated that generation of H3O+ and OH- ions (e.g., with an external electric field) in the interlayer gallery could impart aqueous stability to the layered GO membranes (A. Gogoi, ACS Appl. Mater. Interfaces, 2022, 14, 34946). This, however, compromises the water flux through the membrane. In this study, we report on reducing the GO nanosheets as a solution to this issue. With the reduction of the GO nanosheets, the water flux through the layered GO membrane initially increases and then decreases again beyond a certain degree of reduction. Here, two key factors are at play. Firstly, the instability of the H-bond network between water molecules and the GO nanosheets, which increases the water flux. Secondly, the pore size reduction in the interlayer gallery of the membranes, which decreases the water flux. We also observe a significant improvement in the salt rejection of the membranes, due to the dissociation of water molecules in the interlayer gallery. In particular, for the case of 10% water dissociation, the water flux through the membranes can be enhanced without altering its selectivity. This is an encouraging observation as it breaks the traditional tradeoff between water flux and salt rejection of a membrane.

Recent Advances in Graphene-Enabled Materials for Photovoltaic Applications: A Comprehensive Review

Graphene's two-dimensional structural arrangement has sparked a revolutionary transformation in the domain of conductive transparent devices, presenting a unique opportunity in the renewable energy sector. This comprehensive Review critically evaluates the most recent advances in graphene production and its employment in solar cells, focusing on dye-sensitized, organic, and perovskite devices for bulk heterojunction (BHJ) designs. This comprehensive investigation discovered the following captivating results: graphene integration resulted in a notable 20.3% improvement in energy conversion rates in graphene-perovskite photovoltaic cells. In comparison, BHJ cells saw a laudable 10% boost. Notably, graphene's 2D internal architecture emerges as a protector for photovoltaic devices, guaranteeing long-term stability against various environmental challenges. It acts as a transportation facilitator and charge extractor to the electrodes in photovoltaic cells. Additionally, this Review investigates current research highlighting the role of graphene derivatives and their products in solar PV systems, illuminating the way forward. The study elaborates on the complexities, challenges, and promising prospects underlying the use of graphene, revealing its reflective implications for the future of solar photovoltaic applications.

Desalination Performance in Janus Graphene Oxide Channels: Geometric Asymmetry vs Charge Polarity

Improving the desalination performance of membranes is always in the spotlight of scientific research; however, Janus channels with polarized surface charge as nanofiltration membranes are still unexplored. In this work, using molecular dynamics simulations, we demonstrate that Janus graphene oxide (GO) channels with appropriate geometry and surface charge can serve as highly efficient nanofiltration membranes. We observe that the water permeability of symmetric Janus GO channels is significantly superior to that of asymmetric channels without sacrificing much ion rejection, owing to weakened ion blockage and electrostatic effects. Furthermore, in symmetric Janus GO channels, the transport of water and ions is sensitive to the charge polarity of the channel inner surface, which is realized by tuning the ratio of cationic and anionic functionalization. Specifically, with the increase in cationic functionalization, the water flux decreases monotonously, while ion rejection displays an interesting maximum behavior that indicates desalination optimization. Moreover, the trade-off between water permeability and ion rejection suggests that the Janus GO channels have an excellent desalination potential and are highly tunable according to the specific water treatment requirements. Our work sheds light on the key role of channel geometry and charge polarity in the desalination performance of Janus GO channels, which paves the way for the design of novel desalination devices.

Nanowire-assisted electrochemical perforation of graphene oxide nanosheets for molecular separation

Two-dimensional nanosheets, e.g., graphene oxide (GO), have been widely used to fabricate efficient membranes for molecular separation. However, because of poor transport across nanosheets and high width-to-thickness ratio, the permeation pathway length and tortuosity of these membranes are extremely large, which limit their separation performance. Here we report a facile, scalable, and controllable nanowire electrochemical concept for perforating and modifying nanosheets to shorten permeation pathway and adjust transport property. It is found that confinement effects with locally enhanced charge density, electric field, and hydroxyl radical generation over nanowire tips on anode can be executed under low voltage, thereby inducing confined direct electron loss and indirect oxidation to reform configuration and composition of GO nanosheets. We demonstrate that the porous GO nanosheets with a lot of holes are suitable for assembling separation membranes with tuned accessibility, tortuosity, interlayer space, electronegativity, and hydrophilicity. For molecular separation, the prepared membranes exhibit quadruple water permeance and higher rejections for salts (>91%) and small molecules (>96%) as/than original ones. This nanowire electrochemical perforation concept offers a feasible strategy to reconstruct two-dimensional materials and tune their transport property for separation.

Decoding the Interplay between Topology and Surface Charge in Graphene Oxide Membranes During Humidity Induced Swelling

Graphene oxide (GO) membranes are known to have a complex morphology that depends on the degree of oxidation of the graphene flake and the membrane preparation technique. In this study, using Grand Canonical Monte Carlo simulations, we investigate the mechanism of swelling of GO membranes exposed to different relative humidity (RH) values and show how this is intimately related to the graphene surface chemistry. We show that the structure of the GO membrane changes while the membrane adsorbs water from the environment and that graphene oxide flakes become charged as the membrane is loaded with water and swells. A detailed comparison between simulation and experimental adsorption data reveals that the flake surface charge drives the water adsorption mechanism at low RH when the membrane topology is still disordered and the internal pores are small and asymmetric. As the membrane is exposed to higher RH (80%), the flake acquires more surface charge as more oxide groups deprotonate, and the pores grow in size, yet maintain their disordered geometry. Only for very high relative humidity (98%) does the membrane undergo structural changes. At this level of humidity, the pores in the membrane become slit-like but the flake surface charge remains constant. Our results unveil a very complex mechanism of swelling and show that a single molecular model cannot fully capture the ever-changing chemistry and morphology of the membrane as it swells. Our computational procedure provides the first atomically resolved insight into the GO membrane structure of experimental samples.

Tunable Sieving of Ions Using Graphene Oxide: Swelling Peculiarities in Free-Standing and Confined States

The paper describes a comparative study of swelling processes in free-standing graphene oxide (GO) membranes and GO laminates encapsulated with epoxy glue. For free-standing graphene oxide membranes, a huge variation in d-spacing in the range of 8-12 Å depending on the ambient humidity and from 12 to >30 Å depending on the electrolyte type and its concentration was revealed using direct in situ and in operando XRD studies. Limited swelling at various humidity levels as well as in electrolyte solution with low constriction/expansion of epoxy-encapsulated GO is counterposed to that of free-standing graphene oxides. The swelling suppression was explained by both physical constriction and the intercalation of amines into GO laminates, which was proved by local EDX studies. This results in ion diffusivity variation for over 2 orders of magnitude in free-standing and constrained graphene oxide membranes and provides factual evidence for tunable sieving of ions with confined graphene oxides.

Ionic transport through a bilayer nanoporous graphene with cationic and anionic functionalization

Understanding the ionic transport through multilayer nanoporous graphene (NPG) holds great promise for the design of novel nanofluidic devices. Bilayer NPG with different structures, such as nanopore offset and interlayer space, should be the most simple but representative multilayer NPG. In this work, we use molecular dynamics simulations to systematically investigate the ionic transport through a functionalized bilayer NPG, focusing on the effect of pore functionalization, offset, applied pressure and interlayer distance. For a small interlayer space, the fluxes of water and ions exhibit a sudden reduction to zero with the increase in offset that indicates an excellent on-off gate, which can be deciphered by the increasing potential of mean force barriers. With the increase in pressure, the fluxes increase almost linearly for small offsets while always maintain zero for large offsets. Finally, with the increase in interlayer distance, the fluxes increase drastically, resulting in the reduction in ion rejection. Notably, for a specific interlayer distance with monolayer water structure, the ion rejection maintains high levels (almost 100% for coions) with considerable water flux, which could be the best choice for desalination purpose. The dynamics of water and ions also exhibit an obvious bifurcation for cationic and anionic functionalization. Our work comprehensively addresses the ionic transport through a bilayer NPG and provides a route toward the design of novel desalination devices.

Fundamental Understanding of Ultrathin, Highly Stable Self-Assembled Liquid Crystalline Graphene Oxide Membranes Leading to Precise Molecular Sieving through Non-equilibrium Molecular Dynamics

Self-assembled graphene oxide lyotropic liquid crystal (GO LLC) structures are mostly formed in aqueous medium; however, most GO derivatives are water insoluble, so processing GO LLCs in water poses a practical limitation. The use of polar aprotic solvent (like dimethyl sulfoxide) for the formation of GO LLC structures would be interesting, because it would allow incorporating additives, like photoinitiators or cross-linkers, or blending with polymers that are insoluble in water, which hence would expand its scope. The well-balanced electrostatic interaction between DMSO and GO can promote and stabilize the GO nanosheets' alignment even at lower concentrations. With this in mind, herein we report mechanically robust, chlorine-tolerant, self-assembled nanostructured GO membranes for precise molecular sieving. Small-angle X-ray scattering and polarized optical microscopy confirmed the alignment of the modified GO nanosheets in polar aprotic solvent, and the LLC structure was effectively preserved even after cross-linking under UV light. We found that the modified GO membranes exhibited considerably improved salt rejection for monovalent ions (99%) and water flux (120 LMH) as compared to the shear-aligned GO membrane, which is well supported by forward osmosis simulation studies. Additionally, our simulation studies indicated that water molecules traveled a longer path while permeating through the GO membrane compared to the GO LLC membrane. Consequently, salt ions permeate slowly across the GO LLC membrane, yielding higher salt rejection than the GO membrane. This begins to suggest strong electrostatic repulsion with the salt ions, causing higher salt rejection in the GO LLC membrane. We foresee that the ordered cross-linked GO sheets contributed to excellent mechanical stability under a high-pressure, cross-flow, chlorine environment. Overall, these membranes are easily scalable, exhibit good mechanical stability, and represent a breakthrough for the potential use of polymerized GO LLC membranes in practical water remediation applications.

Electron and ion transport behavior of Vanadium based MXene induced by pressure for Lithium ion intercalated electrodes

Pressure, analogous with temperature and composition, is other meaningful variant for tuning the structure-activity properties of layered materials. In-situ high-pressure electrical results discover that Vanadium based MXene (V₂CT_x MXene) conductivity is increased by one order of magnitude from ambient to 10.4 GPa, and then the conductivity is still fixated on meeting growth as pressure releasing. Increased carrier concentration due to denser compactness is the most important factor in improving sample conductivity. Furthermore, abundant of V₂CT_x samples after preloading different pressures are prepared by the mean of the double-anvil hydraulic press for the first time, and results of increased conductivity were reproduced at ambient conditions. The first-principles calculation of V₂C (non-functional group), V₂CF, V₂CO, and V₂COH explains for the lattice expansion by tracing emotion of different function groups upon decompression. Electrochemical results obtain that once forming V₂CT_x MXene anode rapidly quenched from 2.0 GPa in hydraulic press shows better performance, obviously weakening electric polarization and increasing Li-ion transport rate due to its proper interlaminar densification and improved conductivity. This work opens up a new, simple, and universal approach to develop MXene materials with superior electrical and electrochemical properties, as well as expanding the potential applications for energy storage.

Deformation constraints of graphene oxide nanochannels under reverse osmosis

Nanochannels in laminated graphene oxide nanosheets featuring confined mass transport have attracted interest in multiple research fields. The use of nanochannels for reverse osmosis is a prospect for developing next-generation synthetic water-treatment membranes. The robustness of nanochannels under high-pressure conditions is vital for effectively separating water and ions with sub-nanometer precision. Although several strategies have been developed to address this issue, the inconsistent response of nanochannels to external conditions used in membrane processes has rarely been investigated. In this study, we develop a robust interlayer channel by balancing the associated chemistry and confinement stability to exclude salt solutes. We build a series of membrane nanochannels with similar physical dimensions but different channel functionalities and reveal their divergent deformation behaviors under different conditions. The deformation constraint effectively endows the nanochannel with rapid deformation recovery and excellent ion exclusion performance under variable pressure conditions. This study can help understand the deformation behavior of two-dimensional nanochannels in pressure-driven membrane processes and develop strategies for the corresponding deformation constraints regarding the pore wall and interior.

Selective Ion Transport in Two-Dimensional Lamellar Nanochannel Membranes

Precise and ultrafast ion sieving is highly desirable for many applications in environment-, energy-, and resource-related fields. The development of a permselective lamellar membrane constructed from parallel stacked two-dimensional (2D) nanosheets opened a new avenue for the development of next-generation separation technology because of the unprecedented diversity of the designable interior nanochannels. In this Review, we first discuss the construction of homo- and heterolaminar nanoarchitectures from the starting materials to the emerging preparation strategies. We then explore the property-performance relationships, with a particular emphasis on the effects of physical structural features, chemical properties, and external environment stimuli on ion transport behavior under nanoconfinement. We also present existing and potential applications of 2D membranes in desalination, ion recovery, and energy conversion. Finally, we discuss the challenges and outline research directions in this promising field.

Ultrathin Graphene Oxide-Based Nanocomposite Membranes for Water Purification

Two-dimensional graphene oxide (GO)-based lamellar membranes have been widely developed for desalination, water purification, gas separation, and pervaporation. However, membranes with a well-organized multilayer structure and controlled pore size remain a challenge. Herein, an easy and efficient method is used to fabricate MoO₂@GO and WO₃@GO nanocomposite membranes with controlled structure and interlayer spacing. Such membranes show good separation for salt and heavy metal ions due to the intensive stacking interaction and electrostatic attraction. The as-prepared composite membranes showed high rejection rates (˃70%) toward small metal ions such as sodium (Na⁺) and magnesium (Mg²⁺) ions. In addition, both membranes also showed high rejection rates ˃99% for nickel (Ni²⁺) and lead (Pb²⁺) ions with good water permeability of 275 ± 10 L m^-2 h^-1 bar^-1. We believe that our fabricated membranes will have a bright future in next generation desalination and water purification membranes.

Self-assembly of stable and high-performance molecular cage-crosslinked graphene oxide membranes for contaminant removal

Membrane separation is regarded as efficient technology to alleviate global water crisis. Two-dimensional membranes are promising for contaminant removal from wastewaters, but their uncontrollable transport pathway and instability hinder the further development. In this study, the high-performance and stable two-dimensional framework membranes are self-assembled by graphene oxide (GO) nanosheets and amino-appended metal-organic polyhedrons (MOPs) for water purification and remediation. The MOP molecular cages are uniformly intercalated between GO nanosheets and enriched at defects/edges, and can crosslink membranes, to provide in-plane selective channels, refine vertical passageways, and fix out-of-plane interlayer spaces. The prepared GO/MOP framework membranes have improved stability and nanofiltration performance under cross-flow condition, can keep performance in water after 50 h filtration, and show high rejections over 92% for Na₂SO₄ and 99% for antibiotic and dye contaminants with molecular weights over 280 g mol^-1, and sixfold permeance as that of GO membranes. Our molecular cage-intercalated and crosslinked two-dimensional frameworks offer an alternative route to design robust membranes for efficient removal of contaminants in wastewaters.

Enhanced Ion Rejection in Carbon Nanotubes by a Lateral Electric Field

Reverse osmosis membranes hold great promise for dealing with global water scarcity. However, the trade-off between ion selectivity and water permeability is a serious obstacle to desalination. Herein, we introduce an effective strategy to enhance the desalination performance of the membrane. A series of molecular dynamics simulations manifest that an additional lateral electric field significantly promotes ion rejection in carbon nanotubes (CNTs) under the drive of longitudinal pressure. Specifically, with the increase in the electric field, the ion flux shows a deep linear decay, while the water flux decreases only slightly, resulting in a linear increase in ion rejection. The energy barriers of ions around the CNT inlet are obtained by calculating the potentials of mean force to explain enhanced ion rejection. The lateral electric field uniformly raises the energy barriers of ions by pushing them away from the CNT inlet, corresponding to the enhanced ion velocity in the field direction. Furthermore, with the increase in CNT diameter, there is a significant increase in the flux of both ions and water; however, the lateral electric field can also obviously enhance the ion rejection in wider CNTs. Consequently, the enhancement of ion rejection by lateral electric fields should be universal for different CNT diameters, which opens a new avenue for selective permeation and may have broad implications for desalination devices with large pore sizes.

Arresting Aqueous Swelling of Layered Graphene-Oxide Membranes with H3O+ and OH- Ions

Over the past decade, graphene oxide (GO) has emerged as a promising membrane material with superior separation performance and intriguing mechanical/chemical stability. However, its practical implementation remains very challenging primarily because of its undesirable swelling in an aqueous environment. Here, we demonstrated that dissociation of water molecules into H₃O⁺ and OH^- ions inside the interlayer gallery of a layered GO membrane can strongly affect its stability and performance. We reveal that H₃O⁺ and OH^- ions form clusters inside the GO laminates that impede the permeance of water and salt ions through the membrane. Dynamics of those clusters is sensitive to an external ac electric field, which can be used to tailor the membrane performance. The presence of H₃O⁺ and OH^- ions also leads to increased stability of the hydrogen bond (H-bond) network among the water molecules and the GO layers, which further reduces water permeance through the membrane, while crucially imparting stability to the layered GO membrane against undesirable swelling.

Modular Assembly of Isostructural Mixed-Ligand Uranyl Coordination Polymers Based on a Patterning Strategy

Controlling the orderly assembly of molecular building blocks for the formation of the desired architectural, chemical, and physical properties of the resulting solid-state materials remains a long-term goal and deserves to be examined. In this work, we propose a patterning strategy for modular assembly and structural regulation of mixed-ligand uranyl coordination polymers (CPs) through the combination of couples of organic ligands with complementary molecular geometry and well-matched coordination modes. By using a 5-(p-tolyldiazenyl)isophthalic acid ligand (H₂ptdi) with different rigid linear bicarboxylic acid linkers to construct a well-defined ladder-like pattern, five novel isostructural uranyl coordination polymers, [(UO)₂(ptdi)(bdc)_0.5](dma) (1), [(UO)₂(ptdi)(bpdc)_0.5](dma) (2), [(UO)₂(ptdi)(tpdc)_0.5](dma) (3), [(UO)₂(ptdi)(ndc)_0.5](dma) (4), and [(UO)₂(ptdi) (pdc)_0.5](dma) (5) {H₂bdc, 1,4-dicarboxybenzene; H₂bpdc, 4,4'-biphenyldicarboxylic acid; H₂tpdc, terphenyl-4,4″-dicarboxylic acid; H₂ndc, 2,6-naphthalenedicarboxylic acid; H₂pdc, 1,6-pyrenedicarboxylic acid; [dma]⁺, [(CH₃)₂NH₂]⁺}, were successfully synthesized. Structural analysis reveals that 1-5 have similar ladder-like units but different sizes of one-dimensional nanochannels and interlayer spacing due to the different lengths and widths of the linkers. Because of the changes in interlayer spacing of these isostructural cationic frameworks, differences in the performance of Eu³⁺ ion exchange with [dma]⁺ are observed. Moreover, those compounds with high phase purity have been further characterized by thermogravimetric analysis, infrared spectroscopy, and luminescence spectroscopy, element analysis, PXRD and UV spectroscopy. Among them, compound 3 with strong fluorescence can selectively detect Fe³⁺ over several competing metal cations in aqueous solution. This work not only provides a feasible patterning method for effectively regulating the modular synthesis of functional coordination polymers but also enriches the library of uranyl-based coordination polymers with intriguing structures and functionality.

The coming of age of water channels for separation membranes: from biological to biomimetic to synthetic

Water channels are one of the key pillars driving the development of next-generation desalination and water treatment membranes. Over the past two decades, the rise of nanotechnology has brought together an abundance of multifunctional nanochannels that are poised to reinvent separation membranes with performances exceeding those of state-of-the-art polymeric membranes within the water-energy nexus. Today, these water nanochannels can be broadly categorized into biological, biomimetic and synthetic, owing to their different natures, physicochemical properties and methods for membrane nanoarchitectonics. Furthermore, against the backdrop of different separation mechanisms, different types of nanochannel exhibit unique merits and limitations, which determine their usability and suitability for different membrane designs. Herein, this review outlines the progress of a comprehensive amount of nanochannels, which include aquaporins, pillar[5]arenes, I-quartets, different types of nanotubes and their porins, graphene-based materials, metal- and covalent-organic frameworks, porous organic cages, MoS₂, and MXenes, offering a comparative glimpse into where their potential lies. First, we map out the background by looking into the evolution of nanochannels over the years, before discussing their latest developments by focusing on the key physicochemical and intrinsic transport properties of these channels from the chemistry standpoint. Next, we put into perspective the fabrication methods that can nanoarchitecture water channels into high-performance nanochannel-enabled membranes, focusing especially on the distinct differences of each type of nanochannel and how they can be leveraged to unlock the as-promised high water transport potential in current mainstream membrane designs. Lastly, we critically evaluate recent findings to provide a holistic qualitative assessment of the nanochannels with respect to the attributes that are most strongly valued in membrane engineering, before discussing upcoming challenges to share our perspectives with researchers for pathing future directions in this coming of age of water channels.

Critical Flux and Fouling Analysis of PVDF-Mixed Matrix Membranes for Reclamation of Refinery-Produced Wastewater: Effect of Mixed Liquor Suspended Solids Concentration and Aeration

Fouling tends to cause a significant increase in hydraulic resistance, decreased permeate flux, or increased transmembrane pressure (TMP) when a process is operated under constant TMP or constant flux conditions. To control membrane fouling and maintain sustainable operation, the concept of critical flux has been discussed by several researchers. Various fouling mechanisms, such as macromolecule adsorption, pore plugging, or cake build-up, as well as hydrodynamic conditions, for example aeration, can take place at the membrane surface. This study aimed to investigate the effects of mixed liquor suspended solid (MLSS) concentration and air bubble flow rate (ABFR) on the critical flux and fouling behavior, when treating refinery-produced wastewater. To determine the critical flux values, the experimental flux-steps were the following: (1) the filtration began with a 30 min step duration at a low flux (10 to 20 L/m²h); (2) at the end of this step (after 30 min), the permeate flux was increased, (3) this step was repeated until the TMP did not remain constant at the constant permeate flux, (4) the critical flux was then achieved. A critical flux model with an R² of 0.9 was, therefore, derived, which indicates that the particle properties were regulated by the suspended solids. The increase of MLSS concentration, from 3 mg/L to 4.5 mg/L, resulted in a decrease of the permeate flux by 18%. Moreover, an increase in ABFR, from 1.2 mL/min to 2.4 mL/min, increased the permeate flux, but this decreased with a greater flow rate of aeration. To assess the stability and reversibility of fouling during critical flux (J_c) determination using a mixed matrix membrane, flux-step methods were utilized. A step height of 14.3 L/m²h and 30 min duration were arbitrarily chosen. The flux increased to 32.5 L/m²h with a slight increase of trans membrane pressure (TMP), while the rate of increase became significant at a higher flux of 143.6 L/m²h, due to fouling. Overall, this study proved that the response of MLSS concentration and aeration affected the membrane performance, based on the critical flux and fouling behavior.

Tailored design of nanofiltration membranes for water treatment based on synthesis-property-performance relationships

Tailored design of high-performance nanofiltration (NF) membranes is desirable because the requirements for membrane performance, particularly ion/salt rejection and selectivity, differ among the various applications of NF technology ranging from drinking water production to resource mining. However, this customization greatly relies on a comprehensive understanding of the influence of membrane fabrication methods and conditions on membrane properties and the relationships between the membrane structural and physicochemical properties and membrane performance. Since the inception of NF, much progress has been made in forming the foundation of tailored design of NF membranes and the underlying governing principles. This progress includes theories regarding NF mass transfer and solute rejection, further exploitation of the classical interfacial polymerization technique, and development of novel materials and membrane fabrication methods. In this critical review, we first summarize the progress made in controllable design of NF membrane properties in recent years from the perspective of optimizing interfacial polymerization techniques and adopting new manufacturing processes and materials. We then discuss the property-performance relationships based on solvent/solute mass transfer theories and mathematical models, and draw conclusions on membrane structural and physicochemical parameter regulation by modifying the fabrication process to improve membrane separation performance. Next, existing and potential applications of these NF membranes in water treatment processes are systematically discussed according to the different separation requirements. Finally, we point out the prospects and challenges of tailored design of NF membranes for water treatment applications. This review bridges the long-existing gaps between the pressing demand for suitable NF membranes from the industrial community and the surge of publications by the scientific community in recent years.

Fast Reduced Graphene-Based Membranes with High Desalination Performance

Graphene-oxide (GO) membrane with notable ions sieving properties has attracted significant attention for many applications. However, because of the water swelling of GO membrane, the rejection of monovalent metal cations is generally low. In this work, we developed a fast and facile method to fabricate a kind of reduced GO membranes using the thermal treatment method at 160 °C for only one minute, which denoted as fast reduced GO membrane (FRGO). Surprising, the FRGO membrane represents high ion sieving ability and ultrahigh water/ions selectivity, compared with other reduced GO membranes with similar average interlayer spacings, and even superior to most of GO-based membranes reported in literature. Building on these findings, we provide a new light on fabricating of energy- and environment-related high desalination performance of GO-based membranes as well as a new insight into the transport mechanism within 2D laminar nanochannels.

A Facile and Scalable Method of Fabrication of Large-Area Ultrathin Graphene Oxide Nanofiltration Membrane

With their ultrafast water transport and excellent molecule sieving properties, graphene oxide (GO)-based membranes show great potential in the membrane filtration field for water purification and molecular separation. However, the inability of uniform GO membranes to be produced on an industrial scale and their nonenvironmentally friendly reduction treatment are the bottleneck preventing their industrial applications. Herein, we report a scalable ultrathin uniform GO membrane fabrication technique. Ultrathin GO membranes with a large area of 30 × 80 cm² and a thickness of a few nanometers were uniformly and facilely fabricated using a continuous process combining Mayer rod-coating and a short-time, high-power UV reduction. The interlayer spacing of the GO membrane could be effectively reduced and regulated to improve the salt rejection rate. The fabricated membrane showed superior water permeability of over 60.0 kg m^-2 h^-1 and a high separation efficiency of over 96.0% for a sodium sulfate (Na₂SO₄) solution. It also exhibited excellent mechanical stability under various harsh crossflow conditions. More importantly, the fabrication method developed here can be scaled up using a roll-to-roll industrial production process, which successfully solves the problem currently faced by GO membrane researchers and makes the industrial usage of GO membrane a reality.

High-throughput molecular simulations reveal the origin of ion free energy barriers in graphene oxide membranes

Graphene oxide (GO) membranes are highly touted as materials for contemporary separation challenges including desalination, yet understanding of the interplay between their structure and salt rejection is limited. K⁺ ion permeation through hydrated GO membranes was investigated by combining structurally realistic molecular models and high-throughput molecular dynamics simulations. We show that it is essential to consider the complex GO microstructure to quantitatively reproduce experimentally-derived free energy barriers to K⁺ permeation for membranes with various interlayer distances less than 1.3 nm. This finding confirms the non-uniformity of GO nanopores and the necessity of the high-throughput approach for this class of material. The large barriers arise due to significant dehydration of K⁺ inside the membrane, which can have as few as 3 coordinated water molecules, compared to 7 in bulk solution. Thus, even if the membranes have an average pore size larger than the ion's hydrated diameter, the significant presence of pores whose size is smaller than the hydrated diameter creates bottlenecks for the permeation process.

Biochar/Kevlar Nanofiber Mixed Matrix Nanofiltration Membranes with Enhanced Dye/Salt Separation Performance

Mixed matrix membranes have received ever-growing attention due to their high separation performance, taking the advantages of both porous fillers and polymer backbones. However, limitations still exist due to the instability of polymers in harsh environments. Here, Kevlar aramid nanofibers, a nanoscale version of poly(paraphenylene terephthalamide), were applied to fabricate a nanofiltration membrane by a thermo-assisted phase inversion method due to their high mechanical strength, physical stability and resistance to solvents. Biochar was incorporated in the Kevlar nanofibers to evaluate its performance in dye/salt separation performance. The fillers’ distribution in the polymeric matrix, structural characteristics, and the interaction of fillers with the polymer in the membrane were characterized via SEM, FTIR, AFM and contact angle analysis. Under the optimal fabrication conditions, the obtained membrane exhibited a pure water flux of 3.83 L m⁻² h⁻¹ bar⁻¹ with a dye rejection of 90.55%, 93.54% and 95.41% for Congo red, methyl blue and Reactive blue 19, respectively. Meanwhile, the mixed matrix membrane maintained a salt rejection of 59.92% and 85.37% for NaCl and Na₂SO₄, respectively. The obtained membrane with high separation performance suggested that Kevlar nanofiber and biochar are good candidates for membrane synthesis.

POSS-Functionalized Graphene Oxide/PVDF Electrospun Membranes for Complete Arsenic Removal Using Membrane Distillation

This work demonstrates very high removal rates (below the detection limit of 0.045 ppb) of inorganic arsenic from water using electrospun polyvinylidene difluoride (PVDF) membranes enhanced by the addition of functionalized graphene oxide in membrane distillation. This shows potential for applications in the many parts of the world suffering from arsenic-contaminated groundwater. These membranes were enhanced by the addition of reduced graphene oxide functionalized with superhydrophobic polyhedral oligomeric silsesquioxane molecules (POSS-rGO) into the spinning solutions. The flux of the best-performing rGO-enhanced membrane (containing 2 wt % POSS-rGO) was 21.5% higher than that of the pure PVDF membrane and almost double that of a commercial polytetrafluoroethylene (PTFE) membrane after 24 h of testing, with rejection values exceeding 99.9%. Furthermore, the flux of this membrane was stable over 5 days (∼28 L m^-2 h^-1) of continuous testing and was more stable than those of the PTFE and control membranes when treating a concentrated fouling solution of calcium carbonate and iron(III) sulfate heptahydrate. It also achieved higher permeate quality in these conditions. The Young's modulus and ultimate tensile strength of the best-performing membrane increased by 38 and 271%, respectively, compared to the pure polymer membrane, while both had similar porosities of ∼91%.

Enhanced Ion Sieving of Graphene Oxide Membranes via Surface Amine Functionalization

Membranes based on two-dimensional (2D) nanomaterials have shown great potential to alleviate the worldwide freshwater crisis due to their outstanding performance of freshwater extraction from saline water via ion rejection. However, it is still very challenging to achieve high selectivity and high permeance of water desalination through precise d-spacing control of 2D nanomaterial membranes within subnanometer. Here, we developed functionalized graphene oxide membranes (FGOMs) with nitrogen groups such as amine groups and polarized nitrogen atoms to enhance metal ion sieving by one-step controlled plasma processing. The nitrogen functionalities can produce strong electrostatic interactions with metal ions and result in a mono/divalent cation selectivity of FGOMs up to 90 and 28.3 in single and binary solution, which is over 10-fold than that of graphene oxide membranes (GOMs). First-principles calculation confirms that the ionic selectivity of FGOMs is induced by the difference of binding energies between metal ions and polarized nitrogen atoms. Besides, the ultrathin FGOMs with a thickness of 50 nm can possess a high water flux of up to 120 mol m^-2 h^-1 without sacrificing rejection rates of nearly 99.0% on NaCl solution, showing an ultrahigh water/salt selectivity of around 4.31 × 10³. Such facile and efficient plasma processing not only endows the GOMs with a promising future sustainable water purification, including ion separation and water desalination, but also provides a new strategy to functionalize 2D nanomaterial membranes for specific purposes.

Preparation of bottom-up graphene oxide using citric acid and tannic acid, and its application as a filler for polypropylene nanocomposites

The production of graphene oxide (GO) in large amounts for commercialization in the chemical industry has been limited because harsh and tedious process conditions are required. In this study, a novel carbon nanomaterial called 'bottom-up graphene oxide (BGO)' could be easily prepared for the first time by heat treatment of the mixture of citric acid (CA) and tannic acid (TA) with different weight ratios for the first time. BGO3 prepared using a 50/50 weight ratio of CA/TA was found to have an average lateral size of 250.0 nm and an average thickness of 7.2 nm, and it was further functionalized with cardanol to prepare cardanol functionalized BGO3 (CBGO3) to be used as a filler for the polypropylene (PP) nanocomposite, where cardanol was used to increase the compatibility between BGO3 and PP. The improved mechanical properties and thermal stability of PP nanocomposites containing CBGO3 could be ascribed to the intrinsic mechanical properties of the carbon nanomaterial and the increased compatibility by the attached cardanol on BGO3.

Graphene oxide biopolymer aerogels for the removal of lead from drinking water using a novel nano-enhanced ion exchange cascade

Potable water in developing countries often contains levels of toxic metals that exceed the recommended international limits, with impacts on human health. The aim of the present study was to develop a low cost aerogel synthesised from graphene oxide (GO) cross-linked with alginate to remove Pb²⁺ from potable water. Aerogels were made by a sol-gel of the composite materials followed by a freeze drying method. The shape of the aerogels were 50 mm diameter disks, 5 mm deep and characterised by an open porous network of 50 to 150 micrometres which are mechanically robust upon hydration. Firstly, the study was conducted using a batch adsorption method from a starting concentration 0.48 mM (100 mg/l) of Pb²⁺ in ultrapure water over 240 min, n = 4 with controls. A second series of experiments compared the adsorption of different competing ions at different valencies (Na⁺, Ca²⁺, Cu²⁺, La³⁺) in an equivalent media. A third series of experiments explored Pb²⁺ desorption from the aerogel at low pH and in highly acidic conditions. This simple filter system, based on a batch adsorption methodology expresses a high affinity for Pb²⁺ resulting in an ultra-high mean maximum adsorption capacity of 504 mg/g of Pb²⁺ within 240 mins at pH 5. The aerogel can also adsorb other toxic metal salts such as La³⁺ and Cu²⁺ with a capacity of 146 and 193 mg/g respectively. Furthermore, the aerogel structure can be acid washed removing 98% of the Pb²⁺ from the structure within three minutes. Overall, the data shows that GO alginate aerogels are highly effective at removing Pb²⁺ from water and the primary mechanism involved is ion exchange, although other phenomenon such as proton tunnelling may be a contributing factor to the ultra-high efficiency of the aerogel for Pb²⁺ remediation.