Corrosion Behavior and In Vitro Cytotoxicity of Ni-Ti and Stainless Steel Arch Wires Exposed to Lysozyme, Ovalbumin, and Bovine Serum Albumin

Evaluation of the Corrosion Resistance of Different Types of Orthodontic Fixed Retention Appliances: A Preliminary Laboratory Study

(i) Objective: The present study aimed to compare the electrochemical corrosion resistance of six different types of fixed lingual retainer wires used as fixed retention appliances in an in vitro study. (ii) Methods: In the study, two different Ringer solutions, with pH 7 and pH 3.5, were used. Six groups were formed with five retainer wires in each group. In addition, 3-braided stainless steel, 6-braided stainless steel, Titanium Grade 1, Titanium Grade 5, Gold, and Dead Soft retainer wires were used. The corrosion current density (i_corr), corrosion rate (CR), and polarization resistance (R_p) were determined from the Tafel polarization curves. (iii) Results: The corrosion current density of the Gold retainer group was statistically higher than the other retainer groups in both solutions (p < 0.05). The corrosion rate of the Dead Soft retainer group was statistically higher than the other retainer groups in both solutions (p < 0.05). The polarization resistance of the Titanium Grade 5 retainer group was statistically higher than the other retainer groups in both solutions (p < 0.05). As a result of Scanning Electron Microscope (SEM) images, pitting corrosion was not observed in the Titanium Grade 1, Titanium Grade 5 and Gold retainer groups, while pitting corrosion was observed in the other groups. (iv) Conclusion: From a corrosion perspective, although the study needs to be evaluated in vivo, the Titanium Grade 5 retainer group included is in this in vitro study may be more suitable for clinical use due to its high electrochemical corrosion resistance and the lack of pitting corrosion observed in the SEM images.

Determination of metal ions release from orthodontic archwires in artificial saliva using inductively coupled plasma-optical emission spectrometer (ICP-OES)

Over the last decades many concerns have been raised regarding the migration of potentially toxic metals from the orthodontic appliances to the oral environment due to the dynamic dominant conditions. The current study aimed to investigate the effect of the oral environment acidity and aging time on the ion release from orthodontic archwires. For this purpose, dental archwires consisted of three different alloys were immersed in artificial saliva of varied pH values for 7 and 30 days at 37±1°C. The liquid extracts were then analyzed with inductively coupled plasma-optical emission spectrometer (ICP-OES). It was found that the released ion species and the measured concentrations were not in accordance with manufacturers’ data. Furthermore, the leachates were mainly enriched with Cr and Ni ions by decreasing the saliva pH, while most of the archwires released the highest amounts of Ni, Mn and Cr ions after 30 days aging at pH = 3.5. Independent of the material type or the aging conditions, the total release of Ni and Cr ions was within the considered average dietary intake levels.