Effect of Ammonia Fiber Expansion Combined with NaOH Pretreatment on the Resource Efficiency of Herbaceous and Woody Lignocellulosic Biomass

Straw Tar Epoxy Resin for Carbon Fiber-Reinforced Plastic: A Review

The massive consumption of fossil fuels has led to the serious accumulation of carbon dioxide gas in the atmosphere and global warming. Bioconversion technologies that utilize biomass resources to produce chemical products are becoming widely accepted and highly recognized. The world is heavily dependent on petroleum-based products, which may raise serious concerns about future environmental security. Most commercially available epoxy resins (EPs) are synthesized by the condensation of bisphenol A (BPA), which not only affects the human endocrine system and metabolism, but is also costly to produce and environmentally polluting. In some cases, straw tar-based epoxy resins have been recognized as potential alternatives to bisphenol A-based epoxy resins, and are receiving increasing attention due to their important role in overcoming the above problems. Using straw tar and lignin as the main raw materials, phenol derivatives were extracted from the middle tar instead of bisphenol A. Bio-based epoxy resins were prepared by replacing epichlorohydrin with epoxylated lignin to press carbon fiber sheets, which is a kind of bio-based fine chemical product. This paper reviews the research progress of bio-based materials such as lignin modification, straw pyrolysis, lignin epoxidation, phenol derivative extraction, and synthesis of epoxy resin. It improves the performance of carbon fiber-reinforced plastic (CFRP) while taking into account the ecological and environmental protection, so that the epoxy resin is developed in the direction of non-toxic, harmless and high-performance characteristics, and it also provides a new idea for the development of bio-based carbon fibers.

Multifaced application of AFEX-pretreated biomass in producing second-generation biofuels, ruminant animal feed, and value-added bioproducts

Lignocellulosic biomass holds a crucial position in the prospective bio-based economy, serving as a sustainable and renewable source for a variety of bio-based products. These products play a vital role in displacing fossil fuels and contributing to environmental well-being. However, the inherent recalcitrance of biomass poses a significant obstacle to the efficient access of sugar polymers. Consequently, the bioconversion of lignocellulosic biomass into fermentable sugars remains a prominent challenge in biorefinery processes to produce biofuels and biochemicals. In addressing these challenges, extensive efforts have been dedicated to mitigating biomass recalcitrance through diverse pretreatment methods. One noteworthy process is Ammonia Fiber Expansion (AFEX) pretreatment, characterized by its dry-to-dry nature and minimal water usage. The volatile ammonia, acting as a catalyst in the process, is recyclable. AFEX contributes to cleaning biomass ester linkages and facilitating the opening of cell wall structures, enhancing enzyme accessibility and leading to a fivefold increase in sugar conversion compared to untreated biomass. Over the last decade, AFEX has demonstrated substantial success in augmenting the efficiency of biomass conversion processes. This success has unlocked the potential for sustainable and economically viable biorefineries. This paper offers a comprehensive review of studies focusing on the utilization of AFEX-pretreated biomass in the production of second-generation biofuels, ruminant feed, and additional value-added bioproducts like enzymes, lipids, proteins, and mushrooms. It delves into the details of the AFEX pretreatment process at both laboratory and pilot scales, elucidates the mechanism of action, and underscores the role of AFEX in the biorefinery for developing biofuels and bioproducts, and nutritious ruminant animal feed production. While highlighting the strides made, the paper also addresses current challenges in the commercialization of AFEX pretreatment within biorefineries. Furthermore, it outlines critical considerations that must be addressed to overcome these challenges, ensuring the continued progress and widespread adoption of AFEX in advancing sustainable and economically viable bio-based industries.

Lignin Extraction by Using Two-Step Fractionation: A Review

Lignocellulosic biomass represents the most abundant renewable carbon source on earth and is already used for energy and biofuel production. The pivotal step in the conversion process involving lignocellulosic biomass is pretreatment, which aims to disrupt the lignocellulose matrix. For effective pretreatment, a comprehensive understanding of the intricate structure of lignocellulose and its compositional properties during component disintegration and subsequent conversion is essential. The presence of lignin-carbohydrate complexes and covalent interactions between them within the lignocellulosic matrix confers a distinctively labile nature to hemicellulose. Meanwhile, the recalcitrant characteristics of lignin pose challenges in the fractionation process, particularly during delignification. Delignification is a critical step that directly impacts the purity of lignin and facilitates the breakdown of bonds involving lignin and lignin-carbohydrate complexes surrounding cellulose. This article discusses a two-step fractionation approach for efficient lignin extraction, providing viable paths for lignin-based valorization described in the literature. This approach allows for the creation of individual process streams for each component, tailored to extract their corresponding compounds.

Origin, Selection, and Succession of Coastal Intertidal Zone-Derived Bacterial Communities Associated with the Degradation of Various Lignocellulose Substrates

Terrestrial microbial consortia were reported to play fundamental roles in the global carbon cycle and renewable energy production through the breakdown of complex organic carbon. However, we have a poor understanding of how biotic/abiotic factors combine to influence consortia assembly and lignocellulose degradation in aquatic ecosystems. In this study, we used 96 in situ lignocellulose enriched, coastal intertidal zone-derived bacterial consortia as the initial inoculating consortia and developed 384 cultured consortia under different lignocellulose substrates (aspen, pine, rice straw, and purified Norway spruce lignin) with gradients of salinity and temperature. As coastal consortia, salinity was the strongest driver for assembly, followed by Norway spruce lignin, temperature, and aspen. Moreover, a conceptual model was proposed to demonstrate different succession dynamics between consortia under herbaceous and woody lignocelluloses. The succession of consortium under Norway spruce lignin is greatly related with abiotic factors, while its substrate degradation is mostly correlated with biotic factors. A discrepant pattern was observed in the consortium under rice straw. Finally, we developed four groups of versatile, yet specific consortia. Our study not only reveals that coastal intertidal wetlands are important natural resources to enrich lignocellulolytic degrading consortia but also provides insights into the succession and ecological function of coastal consortium.

The pretreatment of the sustainable biomass feedstock of Pennisetum giganteum for biorefinery using deep eutectic solvents

In this study, Pennisetum giganteum (PG) was investigated as lignocellulosic feedstock to be pretreated by the acidic and basic deep eutectic solvents (DESs) to generate monomeric sugars. The basic DESs showed excellent efficiency of delignification and saccharification. ChCl/MEA can remove 79.8 % lignin and reserve 89.5 % cellulose. As a result, 95.6 % glucose and 88.0 % xylose yield were obtained, significantly enhanced 9.4 and 15.5 times in contrast with those of the unpretreated PG. The 3D microstructures of raw and pretreated PG were constructed for the first time to better investigate the pretreatment effect on its structure. The increasing porosity (20.5 %) and the reducing CrI (42.2 %) contributed in enhancing enzymatic digestion. Moreover, the recyclability of DES indicated that at least 90 % DES was recovered and 59.5 % lignin still can removed with 79.8 % glucose were obtained after five recycling cycles. Meanwhile, 51.6 % lignin was recovered throughout the recycling process.