Metal-Organic Framework-Based Materials for Wastewater Treatment: Superior Adsorbent Materials for the Removal of Hazardous Pollutants

Removal of organic dyes from aqueous solution using a novel pyrene appended Zn(II)-based metal-organic framework and its photocatalytic properties

In this study, we report the efficient removal of organic dyes from aqueous solutions using a newly synthesized pyrene-appended Zn(II)-based metal-organic framework (MOF), ZnSiF6Pyrene MOF, with the chemical formula C52H32F6N4SiZn·4(CHCl3). The MOF was synthesized through a facile method at room temperature using a dipyridylpyrene ligand and ZnSiF6 metal source, resulting in a highly crystalline structure with pyrene functional groups forming the framework. The synthesized MOF was characterized using various analytical techniques, including Fourier-transform infrared spectroscopy (FT-IR), powder X-ray diffraction (PXRD) analysis, and scanning electron microscopy (SEM). Thermal stability was assessed using thermogravimetric analysis (TGA), while the surface area of the MOF was determined using a Brunauer-Emmett-Teller (BET) surface analyzer. Furthermore, the single-crystal X-ray diffraction (SCXRD) structure was studied to authenticate its solid-state structure. The as-synthesized MOF exhibited remarkable adsorption capacity towards various organic dyes, including Congo red (CR), rhodamine B (RhB), and methyl violet (MV), due to its ample surface area and strong π-π interactions between the pyrene moieties and dye molecules, as demonstrated by experimental and in silico docking studies. The photocatalytic degradation of MV dye was also investigated. Detailed trapping tests indicate that hydroxyl (˙OH) and superoxide (O2˙-) radicals are likely the primary active species responsible for the photodegradation of the dye under study. Furthermore, the photocatalytic property of the MOF was investigated under visible light irradiation, demonstrating excellent ability to generate singlet oxygen. This study highlights the potential of pyrene-appended Zn(II)-based MOFs as promising materials for environmental remediation applications.

Unveiling the scope and perspectives of MOF-derived materials for cutting-edge applications

Although synthesis and design of MOFs are crucial factors to the successful implementation of targeted applications, there is still lack of knowledge among researchers about the synthesis of MOFs and their derived composites for practical applications. For example, many researchers manipulate study results, and it has become quite difficult to quit this habit specifically among the young researchers Undoubtedly, MOFs have become an excellent class of compounds but there are many challenges associated with their improvement to attain diverse applications. It has been noted that MOF-derived materials have gained considerable interest owing to their unique chemical properties. These compounds have exhibited excellent potential in various sectors such as energy, catalysis, sensing and environmental applications. It is worth mentioning that most of the researchers rely on commercially available MOFs for use as precursor supports, but it is an unethical and wrong practice because it prevents the exploration of the hidden diversity of similar materials. The reported studies have significant gaps and flaws, they do not have enough details about the exact parameters used for the synthesis of MOFs and their derived materials. For example, many young researchers claim that MOF-based materials cannot be synthesized as per the reported instructions for large-scale implementation. In this regard, current article provides a comprehensive review of the most recent advancements in the design of MOF-derived materials. The methodologies and applications have been evaluated together with their advantages and drawbacks. Additionally, this review suggests important precautions and solutions to overcome the drawbacks associated with their preparation. Applications of MOF-derived materials in the fields of energy, catalysis, sensing and environment have been discussed. No doubt, these materials have become excellent class but there are still many challenges ahead to specify it for the targeted applications.

Synthesis and characterization of amine functionalized silylated clay for heavy metal adsorption: Thermodynamic and kinetic studies on Fe(III) ion

Amine functionalized bentonites were used as adsorbents for the bioremoval of Fe(III) ions, which led to the inclusion of functional groups such as -OH, -NH2, -OCH3, etc. FTIR, XRD, SEM, AFM, TG, BET, XRF, and CHNS analyzer were used to analyze the surface and textural characteristics. The influence of adsorption factors, such as pH, contact time, temperature, and initial concentration, have been investigated and tailored in batch adsorption experiments of Fe (III) metal ions. The maximum adsorption efficiency and capacity of modified BNT-APTMS is 100.90 % and 103.91 mg/g respectively. The adsorption process is best fit with Freundlich model (R2=0.998) than Langmuir model (R2=0.788) and the Temkin model D-R isotherm parameters indicating a physisorption process. A mechanism of spontaneous complexation was accomplished, because of the heterogeneity of the surface, electrostatic forces, pore filling, and π-π stacking. Follows PSO kinetics and favours Freundlich isotherm. The adsorbent substance showed a remarkable capacity for regeneration, assuring the substance's stability and reusability.

Green electrospun Fe-based MOFs incorporated polyvinyl alcohol/carboxymethyl chitosan nanofibrous membranes for enhanced adsorption of tetracycline hydrochloride

Tetracycline hydrochloride (TCH) removal from wastewater has drawn much attention recently, although it still remains challenging. Herein, Fe-based metal-organic frameworks (MOFs) incorporated nanofibrous membranes were prepared by green electrospinning and applied as adsorbents to remove TCH. The presence of MOFs noticeably improved specific surface area of the nanofibrous membranes, and adsorption capability increased with the amount of MOFs within membranes. As the temperature increased, the amount of TCH that was adsorbed continuously reduced, and the maximum adsorption capacity (248.5 mg/g) was attained at 273 K. The adsorption behavior of the nanofibrous membranes followed Langmuir isotherm model and pseudo-second-order kinetic model. Thermodynamic parameters suggested that the adsorption process was spontaneous and exothermic. A series of interactions between the membrane and TCH, such as pore filling, coordination bonding, π-π interaction, hydrogen bonding interaction and electrostatic interaction, combined to enhance the adsorption performance. Good stability and adsorption capability were demonstrated by the nanofibrous membranes, suggesting that they could be used for effective and affordable water purification.

Highlights in Interface of Wastewater Treatment by Utilizing Metal Organic Frameworks: Purification and Adsorption Kinetics

Polluted water has become a concern for the scientific community as it causes many severe threats to living beings. Detection or removal of contaminants present in wastewater and attaining purity of water that can be used for various purposes are a primary responsibility. Different treatment methods have already been used for the purification of sewage. There is a need for low-cost, highly selective, and reusable materials that can efficiently remove pollutants or purify contaminated water. In this regard, MOFs have shown significant potential for applications such as supercapacitors, drug delivery, gas storage, pollutant adsorption, etc. The outstanding structural diversity, substantial surface areas, and adjustable pore sizes of MOFs make them superior candidates for wastewater treatment. This Review provides an overview of the interaction science and engineering (kinetic and thermodynamic aspects with interactions) underpinning MOFs for water purification. First, fundamental strategies for the synthesis methods of MOFs, different categories, and their applicability in wastewater treatment are summarized, followed by a detailed explanation of various interaction mechanisms. Finally, current challenges and future outlooks for research on MOF materials toward the adsorption of hazardous components are discussed. A new avenue for modifying their structural characteristics for the adsorption and separation of hazardous materials, which will undoubtedly direct future work, is also summarized.

Covalent-Organic Framework-Based Materials in Theranostic Applications: Insights into Their Advantages and Challenges

Nanomedicine has been essential in bioimaging and cancer therapy in recent years. Nanoscale covalent-organic frameworks (COFs) have been growing as an adequate classification of biomedical nanomaterials with practical application prospects because of their increased porosity, functionality, and biocompatibility. The high sponginess of COFs enables the incorporation of distinct imaging and therapeutic mechanisms with a better loading efficiency. Nevertheless, preliminary biocompatibility limits their possibility for clinical translation. Thus, cutting-edge nanomaterials with high biocompatibility and improved therapeutic efficiency are highly expected to fast-track the clinical translation of nanomedicines. The inherent effects of nanoscale COFs, such as proper size, modular pore geometry and porosity, and specific postsynthetic transformation through simple organic changes, make them particularly appealing for prospective nanomedicines. The organic building blocks of COFs may also be postmodified for particular binding to biomarkers. The exceptional features of COFs cause them to be an encouraging nanocarrier for bioimaging and therapeutic applications. In this review, we have systematically discussed the advances of COFs in the field of theranostics by providing essential features of COFs along with their synthetic methods. Further, the applications of COFs in the field of theranostics (such as drug delivery systems, photothermal, and photodynamic therapy) are discussed in detail with the help of available literature to date. Furthermore, the advantages of COFs over other materials for therapeutics and drug delivery are discussed. Finally, the review concludes with potential future COF applications in the theranostic field.

Performance of ionic liquid functionalized metal organic frameworks in the adsorption process of phenol derivatives

The growth of industrial activities has produced a significant increase in the release of toxic organic pollutants (OPs) to the environment from industrial wastewater. On this premise, this study reports the use of metal organic frameworks (MOFs) impregnated with various ionic liquids (ILs) in the adsorption of phenol derivatives, i.e., 2,6-dimethylphenol and 4,4'-dihydroxybiphenyl. MOFs were prepared starting from 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) with divalent (Co, Ni, Cu) and trivalent (Ce) metal salts in mild hydrothermal conditions using water as a green solvent. Imidazolium base ionic liquids, namely 1-butyl-3-methylimidazolium trifluoromethanesulfonate, 1-butyl-3-methylimidazolium nitrate, 1-butyl-3-methylimidazolium chloride, and 1-hexyl-3-methyl-imidazolium chloride, were used to modify MOFs, leading to composite materials (IL@MOF), which show the structural characteristics of MOFs, and complement the advantages of ILs. SEM, EDX images, and TG data indicate that the IL is just attached on the surface of the adsorbent material, with no changes in crystal size or morphology, but with slightly altered thermal stabilities of IL@MOF composites compared to the original ILs and MOFs, pointing to some interionic interaction between IL and MOF. This research consists of equilibrium experiments, studying the effect of the initial concentration of OPs on the adsorption efficiency of the as-prepared MOFs and IL@MOF, in order to determine the influence of the nature of the adsorbent on its developed adsorption capacity and to investigate the performance of both ILs and MOFs. To determine the maximum adsorption capacity, several empirical isotherms were used: Langmuir, Freundlich, Redlich-Peterson, and Dubinin-Radushkevich. The characteristic parameters for each isotherm and the correlation coefficient (R2) were identified. The IL modification of MOFs increased the adsorption capacity of IL@MOF for the removal of phenol derivatives from aqueous solution. The adsorption capacity function of the MOF structure follows the trend CeHEDP > CoHEDP > NiHEDP > CuHEDP. The best performance was achieved by adsorbent materials based on Ce.

A Novel Recyclable Magnetic Nano-Catalyst for Fenton-Photodegradation of Methyl Orange and Imidazole Derivatives Catalytic Synthesis

A magnetite chlorodeoxycellulose/ferroferric oxide (CDC@Fe3O4) heterogeneous photocatalyst was synthesised via treated and modified cotton in two steps. The designed nanocomposites were characterised by FTIR, TGA, XRD, SEM, and VSM analyses. The Fenton-photocatalytic decomposition efficiency of the synthesised magnetic catalyst was evaluated under visible sunlight using Methyl Orange (MO) as a model organic pollutant. The impacts of several degradation parameters, including the light source, catalyst load, irradiation temperature, oxidant dose, and pH of the dye aqueous solution and its corresponding concentration on the Fenton photodegradation performance, were methodically investigated. The (CDC@Fe3O4) heterogeneous catalyst showed a remarkable MO removal rate of 97.9% at 10 min under visible-light irradiation. (CDC@Fe3O4) nanomaterials were also used in a heterogeneous catalytic optimised protocol for a multicomponent reaction procedure to obtain nine tetra-substituted imidazole derivatives. The green protocol afforded imidazole derivatives in 30 min with good yields (91-97%) at room temperature and under ultrasound irradiation. Generally, a synthesised recyclable heterogeneous nano-catalyst is a good example and is suitable for wastewater treatment and organic synthesis.

Novel Hydrophobic Functionalized UiO-66 Series: Synthesis, Characterization, and Evaluation of Their Structural and Physical-Chemical Properties

A novel set of four functionalized hydrophobic UiO-66-NHR series were synthesized through postsynthetic procedures, utilizing various benzoyl chlorides and UiO-66-NH2 as starting materials. This synthesis method was carried out by employing p- (1) and o-toluoyl (2), as well as 2- (3) and 4-fluorobenzoyl (4) substituents. The analysis of the resulting compounds was performed using conventional spectroscopic methods such as FT-IR and 1H NMR to quantify the conversion rate into amide. Furthermore, SEM and XPS techniques were employed for morphological and surface analysis. Finally, the evaluation of the chemical stability and contact angle using the sessile drop method was performed to evaluate the technological potential of these compounds for application in aqueous and acidic media (such as selective separation of different metals and wastewater recovery).

Enhanced CO2 capture potential of UiO-66-NH2 synthesized by sonochemical method: experimental findings and performance evaluation

The excessive release of greenhouse gases, especially carbon dioxide (CO2) pollution, has resulted in significant environmental problems all over the world. CO2 capture technologies offer a very effective means of combating global warming, climate change, and promoting sustainable economic growth. In this work, UiO-66-NH2 was synthesized by the novel sonochemical method in only one hour. This material was characterized through PXRD, FT-IR, FE-SEM, EDX, BET, and TGA methods. The CO2 capture potential of the presented material was investigated through the analysis of gas isotherms under varying pressure conditions, encompassing both low and high-pressure regions. Remarkably, this adsorbent manifested a notable augmentation in CO2 adsorption capacity (3.2 mmol/g), achieving an approximate enhancement of 0.9 mmol/g, when compared to conventional solvothermal techniques (2.3 mmol/g) at 25 °C and 1 bar. To accurately represent the experimental findings, three isotherm, and kinetic models were used to fit the experimental data in which the Langmuir model and the Elovich model exhibited the best fit with R2 values of 0.999 and 0.981, respectively. Isosteric heat evaluation showed values higher than 80 kJ/mol which indicates chemisorption between the adsorbent surface and the adsorbate. Furthermore, the selectivity of the adsorbent was examined using the Ideal Adsorbed Solution Theory (IAST), which showed a high value of 202 towards CO2 adsorption under simulated flue gas conditions. To evaluate the durability and performance of the material over consecutive adsorption-desorption processes, cyclic tests were conducted. Interestingly, these tests demonstrated only 0.6 mmol/g capacity decrease for sonochemical UiO-66-NH2 throughout 8 consecutive cycles.

Sono-processes: Emerging systems and their applicability within the (bio-)medical field

Sonochemistry, although established in various fields, is still an emerging field finding new effects of ultrasound on chemical systems and are of particular interest for the biomedical field. This interdisciplinary area of research explores the use of acoustic waves with frequencies ranging from 20 kHz to 1 MHz to induce physical and chemical changes. By subjecting liquids to ultrasonic waves, sonochemistry has demonstrated the ability to accelerate reaction rates, alter chemical reaction pathways, and change physical properties of the system while operating under mild reaction conditions. It has found its way into diverse industries including food processing, pharmaceuticals, material science, and environmental remediation. This review provides an overview of the principles, advancements, and applications of sonochemistry with a particular focus on the domain of (bio-)medicine. Despite the numerous benefits sonochemistry has to offer, most of the research in the (bio-)medical field remains in the laboratory stage. Translation of these systems into clinical practice is complex as parameters used for medical ultrasound are limited and toxic side effects must be minimized in order to meet regulatory approval. However, directing attention towards the applicability of the system in clinical practice from the early stages of research holds significant potential to further amplify the role of sonochemistry in clinical applications.

Sulfate Radical-Based Degradation of Organic Pollutants: A Review on Application of Metal-Organic Frameworks as Catalysts

The degradation of organic pollutants present in domestic and industrial effluents is a matter of concern because of their high persistence and ecotoxicity. Recently, advanced oxidation processes (AOPs) are being emphasized for organic pollutant removal from effluents, as they have shown higher degradation efficiencies when compared to conventional activated sludge processes. Sulfate radical-based methods are some of the AOPs, mainly carried out using persulfate (PS) and peroxymonosulfate (PMS), which have gained attention due to the ease of sulfate radical generation and the effective degradation of organic molecules. PMS is gaining more popularity because of its high reactivity and ability to generate excess sulfate radicals. PMS has been the major focus; therefore, its mechanism has been explained, and limitations have been elaborated. The involvement of metal-organic frameworks for PMS/PS activation applied to organic pollutant removal and recent advances in the application of biochar and hydrogel-assisted metal-organic frameworks have been discussed.

Efficient Removal of Carcinogenic Azo Dyes from Water Using Iron(II) Clathrochelate Derived Metalorganic Copolymers Made from a Copper-Catalyzed [4 + 2] Cyclobenzannulation Reaction

A novel synthetic strategy is disclosed to prepare a new class of metalorganic copolymers that contain iron(II) clathrochelate building blocks by employing a mild and cost-effective copper-catalyzed [4 + 2] cyclobenzannulation reaction, using three specially designed diethynyl iron(II) clathrochelate synthons. The target copolymers CBP1-3 were isolated in high purity and excellent yields as proven by their structural and photophysical characterization, namely, Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS) and UV-VIS absorption and emission spectroscopies. The thermogravimetric analysis (TGA) of CBP1-3 revealed an excellent chemical stability. Investigation of the adsorption properties of the target copolymers towards the carcinogenic methyl red dye from aqueous solution revealed a quantitative uptake in 30 min. Isothermal adsorption studies disclosed that methyl red uptake from aqueous solution followed the Langmuir model for all of the target copolymers, reaching a maximum adsorption capacity (q_m) of 431 mg g^-. Kinetic investigation revealed that the adsorption followed pseudo-first-order with an equilibrium adsorption capacity (q_e,cal) of 79.35 mg g^- and whose sorption property was sustained even after its reuse several times.