Synthesis of Vanadium Oxide Nanofibers with Variable Crystallinity and V5+/V4+ Ratios

Oxidative stress modulating nanomaterials and their biochemical roles in nanomedicine

Many pathological conditions are predominantly associated with oxidative stress, arising from reactive oxygen species (ROS); therefore, the modulation of redox activities has been a key strategy to restore normal tissue functions. Current approaches involve establishing a favorable cellular redox environment through the administration of therapeutic drugs and redox-active nanomaterials (RANs). In particular, RANs not only provide a stable and reliable means of therapeutic delivery but also possess the capacity to finely tune various interconnected components, including radicals, enzymes, proteins, transcription factors, and metabolites. Here, we discuss the roles that engineered RANs play in a spectrum of pathological conditions, such as cancer, neurodegenerative diseases, infections, and inflammation. We visualize the dual functions of RANs as both generator and scavenger of ROS, emphasizing their profound impact on diverse cellular functions. The focus of this review is solely on inorganic redox-active nanomaterials (inorganic RANs). Additionally, we deliberate on the challenges associated with current RANs-based approaches and propose potential research directions for their future clinical translation.

Nickel-doped vanadium pentoxide (Ni@V2O5) nanocomposite induces apoptosis targeting PI3K/AKT/mTOR signaling pathway in skin cancer: An in vitro and in vivo study

In the present study, the vanadium pentoxide (V2O5) nickel-doped vanadium pentoxide (Ni@V2O5) was prepared and determined for in vitro anticancer activity. The structural characterization of the prepared V2O5 and Ni@V2O5 was determined using diverse morphological and spectroscopic analyses. The DRS-UV analysis displayed the absorbance at 215 nm for V2O5 and 331 nm for Ni@V2O5 as the primary validation of the synthesis of V2O5 and Ni@V2O5. The EDS spectra exhibited the presence of 30% of O, 69% of V, and 1% of Ni and the EDS mapping showed the constant dispersion. The FE-SEM and FE-TEM analysis showed the V2O5 nanoparticles are rectangle-shaped and nanocomposites have excellent interfaces between nickel and V2O5. The X-ray photoelectron spectroscopy (XPS) investigation of Ni@V2O5 nanocomposite endorses the occurrence of elements V, O, and Ni. The in vitro MTT assay clearly showed that the V2O5 and Ni@V2O5 have significantly inhibited the proliferation of B16F10 skin cancer cells. In addition, the nanocomposite produces the endogenous reactive oxygen species in the mitochondria, causes the mitochondrial membrane and nuclear damage, and consequently induces apoptosis by caspase 9/3 enzymatic activity in skin cancer cells. Also, the western blot analysis showed that the nanocomposite suppresses the oncogenic marker proteins such as PI3K, Akt, and mTOR in the skin cancer cells. Together, the results showed that Ni@V2O5 can be used as an auspicious anticancer agent against skin cancer.

Vanadium Oxide: Phase Diagrams, Structures, Synthesis, and Applications

Vanadium oxides with multioxidation states and various crystalline structures offer unique electrical, optical, optoelectronic and magnetic properties, which could be manipulated for various applications. For the past 30 years, significant efforts have been made to study the fundamental science and explore the potential for vanadium oxide materials in ion batteries, water splitting, smart windows, supercapacitors, sensors, and so on. This review focuses on the most recent progress in synthesis methods and applications of some thermodynamically stable and metastable vanadium oxides, including but not limited to V₂O₃, V₃O₅, VO₂, V₃O₇, V₂O₅, V₂O₂, V₆O₁₃, and V₄O₉. We begin with a tutorial on the phase diagram of the V-O system. The second part is a detailed review covering the crystal structure, the synthesis protocols, and the applications of each vanadium oxide, especially in batteries, catalysts, smart windows, and supercapacitors. We conclude with a brief perspective on how material and device improvements can address current deficiencies. This comprehensive review could accelerate the development of novel vanadium oxide structures in related applications.

Graphitic carbon-encapsulated V2O5 nanocomposites as a superb photocatalyst for crystal violet degradation

To materialize the excellent photocatalyst for crystal violet dye-degradation, the graphitic carbon-encapsulated vanadium pentoxide (GC-V₂O₅) nanocomposites were synthesized through the simple sonication method by using the green tea waste-derived GC nanoflakes and the sonochemically synthesized V₂O₅ nanorods. The nanocomposites were confirmed to comprise an aggregated morphology, in which the orthorhombic V₂O₅ nanorods were well anchored with the intertwingled GC nanoflakes. Owing to the encapsulation of defective V₂O₅ by conductive GC, the GC-V₂O₅ nanocomposites exhibited the enhanced photocatalytic dye-degradation efficiency up to 98.4% within 105 min. Namely, the encapsulated GC nanosheets might compensate the native defects (i.e., charge traps) on the V₂O₅ surface; hence, the charge transport could be enhanced during the dye-degradation process while the photocarrier recombination could be suppressed. The results suggest the conducting layer-encapsulated semiconducting oxide nanocomposites (e.g., GC-V₂O₅) to be of good use for future green environmental technology, particularly, as a superb photocatalyst for dye degradation.

Research Progress on the Applications of Electrospun Nanofibers in Catalysis

During the last two decades, electrospinning has become a very popular technique for the fabrication of nanofibers due to its low cost and simple handling. Nanofiber materials have found utilization in many areas such as medicine, sensors, batteries, etc. In catalysis, these materials also present important advantages, since they present a low resistance to internal diffusion and a high surface area to volume ratio. These advantages are mainly due to the diameter–length proportion. A bibliographic analysis on the applications of electrospun nanofibers in catalysis shows that there are two important groups of catalysts that are being investigated, based on TiO2 and in carbon materials. The main applications found are in photo- and in electro-catalysis. The present study contributes by reviewing these catalytic applications of electrospun nanofibers and demonstrating that they are promising materials as catalysts, underlining some works to prove the advantages and possibilities that these materials have as catalysts. On one hand, the possibilities of synthesis are almost infinite, since with coaxial electrospinning quite complex nanofibers with different layers can be prepared. On the other hand, the diameter and other properties can be controlled by monitoring the applied voltage and other parameters during the synthesis, being quite reproducible procedures. The main advantages of these materials can be grouped in two: one related to their morphology, as has been commented, relative to their low resistance and internal diffusion, that is, their fluidynamic behavior in the reactor; the second group involves advantages related to the fact that the active phases can be nanoscaled and dispersed, improving the activity and selectivity in comparison with conventional catalytic materials with the same chemical composition.

Mono-, Bi-, and Tri-Metallic DES Are Prepared from Nb, Zr, and Mo for n-Butane Selective Oxidation via VPO Catalyst

In recent work, deep eutectic solvents (DESs) as ionic liquid analogues have been abundantly used in catalysis. Herein, vanadium phosphorus oxide (VPO) catalysts were synthesized from mono-, bi-, and tri- metallic DES of Nb, Zr, and Mo metal dopants as structure-directing agents and electronic promoters for n-butane selective oxidation towards maleic anhydride. Higher MA selectivity and larger n-butane conversion was successfully obtained using the newly developed catalysts, while oxidation by-product COx (CO, CO2) was minimized. Characterization techniques including FTIR, DSC, XRD, TEM, SEM, EDS, Raman spectroscopy, TGA, XPS, and NH3-TPD were employed to fully characterize the DESs, precursors and catalysts. This work led to an increase of 7.8% in MA mass yield with 16% more n-butane conversion as compared to an unpromoted VPO catalyst. Moreover, the utilization of a low-carbon alkane brought in a green impact on the chemical plant as well as the environment.

VO2 Nanostructures for Batteries and Supercapacitors: A Review

Vanadium dioxide (VO₂ ) received tremendous interest lately due to its unique structural, electronic, and optoelectronic properties. VO₂ has been extensively used in electrochromic displays and memristors and its VO₂ (B) polymorph is extensively utilized as electrode material in energy storage applications. More studies are focused on VO₂ (B) nanostructures which displayed different energy storage behavior than the bulk VO₂ . The present review provides a systematic overview of the progress in VO₂ nanostructures syntheses and its application in energy storage devices. Herein, a general introduction, discussion about crystal structure, and syntheses of a variety of nanostructures such as nanowires, nanorods, nanobelts, nanotubes, carambola shaped, etc. are summarized. The energy storage application of VO₂ nanostructure and its composites are also described in detail and categorically, e.g. Li-ion battery, Na-ion battery, and supercapacitors. The current status and challenges associated with VO₂ nanostructures are reported. Finally, light has been shed for the overall performance improvement of VO₂ nanostructure as potential electrode material for future application.

Selective Oxidation of Simple Aromatics Catalyzed by Nano-Biomimetic Metal Oxide Catalysts: A Mini Review

The process of selective oxy-functionalization of hydrocarbons using peroxide, O3, H2O2, O2, and transition metals can be carried out by the reactive oxygen species such as hydroxyl/hydroperoxyl radical and/or metal oxygenated species generated in the catalytic reaction. Thus, a variety of mechanisms have been proposed for the selective catalytic oxidation of various hydrocarbons including light alkanes, olefins, and simple aromatics by the biological metalloproteins and their biomimetics either in their homogeneous or heterogeneous platforms. Most studies involving these metalloproteins are Fe or Cu monooxygenases. The pathways carried out by these metalloenzymes in the oxidation of C-H bonds invoke either radical reaction mechanisms including Fenton's chemistry and hydrogen atom transfer followed by radical rebound reaction mechanism or electrophilic oxygenation/O-atom transfer by metal-oxygen species. In this review, we discuss the metal oxide nano-catalysts obtained from metal salts/molecular precursors (M = Cu, Fe, and V) that can easily form in situ through the oxidation of substrates using H2O2(aq) in CH3CN, and be facilely separated from the reaction mixtures as well as recycled for several times with comparable catalytic efficiency for the highly selective conversion from hydrocarbons including aromatics to oxygenates. The mechanistic insights revealed from the oxy-functionalization of simple aromatics mediated by the novel biomimetic metal oxide materials can pave the way toward developing facile, cost-effective, and highly efficient nano-catalysts for the selective partial oxidation of simple aromatics.

Nanomaterials in Dentistry: State of the Art and Future Challenges

Nanomaterials are commonly considered as those materials in which the shape and molecular composition at a nanometer scale can be controlled. Subsequently, they present extraordinary properties that are being useful for the development of new and improved applications in many fields, including medicine. In dentistry, several research efforts are being conducted, especially during the last decade, for the improvement of the properties of materials used in dentistry. The objective of the present article is to offer the audience a complete and comprehensive review of the main applications that have been developed in dentistry, by the use of these materials, during the last two decades. It was shown how these materials are improving the treatments in mainly all the important areas of dentistry, such as endodontics, periodontics, implants, tissue engineering and restorative dentistry. The scope of the present review is, subsequently, to revise the main applications regarding nano-shaped materials in dentistry, including nanorods, nanofibers, nanotubes, nanospheres/nanoparticles, and zeolites and other orders porous materials. The results of the bibliographic analysis show that the most explored nanomaterials in dentistry are graphene and carbon nanotubes, and their derivatives. A detailed analysis and a comparative study of their applications show that, although they are quite similar, graphene-based materials seem to be more promising for most of the applications of interest in dentistry. The bibliographic study also demonstrated the potential of zeolite-based materials, although the low number of studies on their applications shows that they have not been totally explored, as well as other porous nanomaterials that have found important applications in medicine, such as metal organic frameworks, have not been explored. Subsequently, it is expected that the research effort will concentrate on graphene and zeolite-based materials in the coming years. Thus, the present review paper presents a detailed bibliographic study, with more than 200 references, in order to briefly describe the main achievements that have been described in dentistry using nanomaterials, compare and analyze them in a critical way, with the aim of predicting the future challenges.

Metal-Organic Decomposition-Mediated Nanoparticulate Vanadium Oxide Hole Transporting Buffer Layer for Polymer Bulk-Heterojunction Solar Cells

In this study, a solution-processable compact vanadium oxide (V₂O₅) film with a globular nanoparticulate structure is introduced to the hole transport layer (HTL) of polymer bulk-heterojunction based solar cells comprised of PTB7:PC₇₀BM by using a facile metal-organic decomposition method to replace the conventionally utilized poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS). For this, a biocompatible structure-determining agent, polyethylene glycol (PEG, M_n 300), is used as an additive in the precursor to form the nanoparticulate compact V₂O₅ (hereafter referred to as NP-V₂O₅) film, which possesses an outstandingly smooth surface morphology. The introduction of NP-V₂O₅ HTL via the solution process with a neutral pH condition successfully improved the stability by preventing the decomposition of indium tin oxide (ITO) glass and the penetration of heavy-metal components and moisture, which are considered as the crucial drawbacks of using PEDOT:PSS. Over 1440 h (60 days) of the stability test, an organic solar cell (OSC) with NP-V₂O₅ showed a significant durability, maintaining 82% of its initial power conversion efficiency (PCE), whereas an OSC with PEDOT:PSS maintained 51% of its initial PCE. Furthermore, due to the positive effects of the modified surface properties of NP-V₂O₅, the PCE was slightly enhanced from 7.47% to 7.89% with a significant improvement in the short-circuit current density and fill factor.

Vanadium Oxide Nanofibers: Synthesis and Research on Functional Properties

Aim:

Vanadium oxide nanofibers have been manufactured by the sol–gel electrospinning method followed by the thermal treatment in air and argon.

Materials and Methods:

The samples are characterized by optical, laser confocal and scanning electron microscopy, energy-dispersive X-ray elemental analysis, X-ray diffraction, cyclic voltammetry, and electrical conductivity measurements.

Results:

The obtained VO2 nanofibers demonstrate the semiconductor-to-metal phase transition. Also, the vanadium pentoxide nanofibers are examined as electrode materials for rechargeable Li-ion batteries.

Selective catalytic oxidation of benzene to phenol by a vanadium oxide nanorod (Vnr) catalyst in CH3CN using H2O2(aq) and pyrazine-2-carboxylic acid (PCA)

A vanadium oxide nanorod (V_nr) catalyst has been synthesized without using surfactants through crystallization, which is highly active for benzene to phenol oxidation.

Effects of vanadium pentoxide with different crystallinities on lithium ion storage performance

V₂O₅ anode materials with low crystallinity release better electrochemical performance than that of V₂O₅ with high crystallinity.