Evaluation of a Biocomposite Mesh Modified with Decellularized Human Amniotic Membrane for Intraperitoneal Onlay Mesh Repair

Ibuprofen-loaded bilayer electrospun mesh modulates host response toward promoting full-thickness abdominal wall defect repair

Pro-inflammatory response impairs the constructive repair of abdominal wall defects after mesh implantation. Electrospinning-aid functionalization has the potential to improve the highly orchestrated response by attenuating the over-activation of foreign body reactions. Herein, we combined poly(L-lactic acid-co-caprolactone) (PLLA-CL) with gelatin proportionally via electrospinning, with Ibuprofen (IBU) incorporation to fabricate a bilayer mesh for the repair improvement. The PLLA-CL/gelatin/IBU (PGI) mesh was characterized in vitro and implanted into the rat model with a full-thickness defect for a comprehensive evaluation in comparison to the PLLA-CL/gelatin (PG) and off-the-shelf small intestinal submucosa (SIS) meshes. The bilayer PGI mesh presented a sustained release of IBU over 21 days with degradation in vitro and developed less-intensive intraperitoneal adhesion along with a histologically weaker inflammatory response than the PG mesh after 28 days. It elicited an M2 macrophage-dominant foreign body reaction within the process, leading to a pro-remodeling response similar to the biological SIS mesh, which was superior to the PG mesh. The PGI mesh provided preponderant mechanical supports over the SIS mesh and the native abdominal wall with similar compliance. Collectively, the newly developed mesh advances the intraperitoneal applicability of electrospun meshes by guiding a pro-remodeling response and offers a feasible functionalization approach upon immunomodulation.

A Review of Advanced Abdominal Wall Hernia Patch Materials

Tension-free abdominal wall hernia patch materials (AWHPMs) play an important role in the repair of abdominal wall defects (AWDs), which have a recurrence rate of <1%. Nevertheless, there are still significant challenges in the development of tailored, biomimetic, and extracellular matrix (ECM)-like AWHPMs that satisfy the clinical demands of abdominal wall repair (AWR) while effectively handling post-operative complications associated with abdominal hernias, such as intra-abdominal visceral adhesion and abnormal healing. This extensive review presents a comprehensive guide to the high-end fabrication and the precise selection of these advanced AWHPMs. The review begins by briefly introducing the structures, sources, and properties of AWHPMs, and critically evaluates the advantages and disadvantages of different types of AWHPMs for AWR applications. The review subsequently summarizes and elaborates upon state-of-the-art AWHPM fabrication methods and their key characteristics (e.g., mechanical, physicochemical, and biological properties in vitro/vivo). This review uses compelling examples to demonstrate that advanced AWHPMs with multiple functionalities (e.g., anti-deformation, anti-inflammation, anti-adhesion, pro-healing properties, etc.) can meet the fundamental clinical demands required to successfully repair AWDs. In particular, there have been several developments in the enhancement of biomimetic AWHPMs with multiple properties, and additional breakthroughs are expected in the near future.

Directly coaxial bioprinting of 3D vascularized tissue using novel bioink based on decellularized human amniotic membrane

Despite several progressions in the biofabrication of large-scale engineered tissues, direct biopri nting of perfusable three-dimensional (3D) vasculature remained unaddressed. Developing a feasible method to generate cell-laden thick tissue with an effective vasculature network to deliver oxygen and nutrient is crucial for preventing the formation of necrotic spots and tissue death. In this study, we developed a novel technique to directly bioprint 3D cell-laden prevascularized construct. We developed a novel bioink by mixing decellularized human amniotic membrane (dHAM) and alginate (Alg) in various ratios. The bioink with encapsulated human vein endothelial cells (HUVECs) and a crosslinker, CaCl2, were extruded via sheath and core nozzle respectively to directly bioprint a perfusable 3D vasculature construct. The various concentration of bioink was assessed from several aspects like biocompatibility, porosity, swelling, degradation, and mechanical characteristics, and accordingly, optimized concentration was selected (Alg 4 %w/v - dHAM 0.6 %w/v). Then, the crosslinked bioink without microchannel and the 3D bioprinted construct with various microchannel distances (0, 1.5 mm, 3 mm) were compared. The 3D bioprinted construct with a 1.5 mm microchannels distance demonstrated superiority owing to its 492 ± 18.8 % cell viability within 14 days, excellent tubulogenesis, remarkable expression of VEGFR-2 which play a crucial role in endothelial cell proliferation, migration, and more importantly angiogenesis, and neovascularization. This perfusable bioprinted construct also possess appropriate mechanical stability (32.35 ± 5 kPa Young's modulus) for soft tissue. Taking these advantages into the account, our new bioprinting method possesses a prominent potential for the fabrication of large-scale prevascularized tissue to serve for regenerative medicine applications like implantation, drug-screening platform, and the study of mutation disease.

Biomedical Application of Decellularized Scaffolds

Tissue loss and end-stage organ failure are serious health problems across the world. Natural and synthetic polymer scaffold material based artificial organs play an important role in the field of tissue engineering and organ regeneration, but they are not from the body and may cause side effects such as rejection. In recent years, the biomimetic decellularized scaffold based materials have drawn great attention in the tissue engineering field for their good biocompatibility, easy modification, and excellent organism adaptability. Therefore, in this review, we comprehensively summarize the application of decellularized scaffolds in tissue engineering and biomedicine in recent years. The preparation methods, modification strategies, construction of artificial tissues, and application in biomedical applications are discussed. We hope that this review will provide a useful reference for research on decellularized scaffolds and promote their application tissue engineering.

Evaluation of colonic anastomosis healing using hybrid nanosheets containing molybdenum disulfide (MOS2) scaffold of human placental amniotic membrane and polycaprolactone (PCL) in rat animal model

Anastomosis is a standard technique following different conditions such as obstruction, tumor, and trauma. Obstruction, adhesion, or anastomosis leakage can be some of its complications. To improve healing and prevent postoperative complications, we design a hybrid scaffold containing acellular human amniotic membranes and polycaprolactone-molybdenum disulfide nanosheets for colon anastomosis. The animal model of colocolonic anastomosis was performed on two groups of rats: control and scaffold. The hybrid scaffold was warped around the anastomosis site in the scaffold group. Samples from the anastomosis site were resected on the third and seventh postoperative days for histopathological and molecular assessments. Histopathologic score and burst pressure had shown significant improvement in the scaffold group. No mortality and anastomosis leakage was reported in the scaffold group. In addition, inflammatory markers were significantly decreased, while anti-inflammatory cytokines were increased in the scaffold group. The result indicates that our hybrid scaffold is a proper choice for colorectal anastomosis repair by declining postoperative complications and accelerating healing.

Human Acellular Amniotic Membrane as Skin Substitute and Biological Scaffold: A Review of Its Preparation, Preclinical Research, and Clinical Application

Human acellular amniotic membrane (HAAM) has emerged as a promising tool in the field of regenerative medicine, particularly for wound healing and tissue regeneration. HAAM provides a natural biological scaffold with low immunogenicity and good anti-infective and anti-scarring results. Despite its potential, the clinic application of HAAM faces challenges, particularly with respect to the preparation methods and its low mechanical strength. This review provides a comprehensive overview of HAAM, covering its preparation, sterilization, preclinical research, and clinical applications. This review also discusses promising decellularization and sterilization methods, such as Supercritical Carbon Dioxide (SC-CO2), and the need for further research into the regenerative mechanisms of HAAM. In addition, we discuss the potential of HAAM as a skin dressing and cell delivery system in preclinical research and clinical applications. Both the safety and effectiveness of HAAM have been validated by extensive research, which provides a robust foundation for its clinical application.

Research on essential performance of oxidized chitosan-crosslinked acellular porcine aorta modified with bioactive SCPP/DOPA for esophageal scaffold with enhanced mechanical strength, biocompatibility and anti-inflammatory

Acellular porcine aorta (APA) is an excellent candidate for an implanted scaffold but needs to be modified with appropriate cross-linking agent to increase its mechanical property and storage time in vitro as well as to give itself some bioactivities and eliminate its antigenicity for acting as a novel esophageal prosthesis. In this paper, a polysaccharide crosslinker (oxidized chitosan, OCS) was prepared by oxidizing chitosan using NaIO₄ and further used to fix APA to prepare a novel esophageal prosthesis (scaffold). And then the surface modification with dopamine (DOPA) and strontium-doped calcium polyphosphate (SCPP) were performed one after another to prepare DOPA/OCS-APA and SCPP-DOPA/OCS-APA to improve the biocompatibility and inhibit inflammation of the scaffolds. The results showed that the OCS with a feeding ratio of 1.5:1.0 and a reaction time of 24 h had a suitable molecular weight and oxidation degree, almost no cytotoxicity and good cross-linking effect. Compared with glutaraldehyde (GA) and genipin (GP), OCS-fixed APA could provide a more suitable microenvironment for cell proliferation. The vital cross-linking characteristics and cytocompatibility of SCPP-DOPA/OCS-APA were evaluated. Results suggested that SCPP-DOPA/OCS-APA exhibited suitable mechanical properties, excellent resistance to enzymatic degradation/acid degradation, suitable hydrophilicity, and the ability to promote the proliferation of Human normal esophageal epithelial cells (HEECs) and inhibit inflammation in vitro. In vivo tests also confirmed that SCPP-DOPA/OCS-APA could diminish the immunological response to samples and had a positive impact on bioactivity and anti-inflammatory. In conclusion, SCPP-DOPA/OCS-APA could act as an effective, bioactive artificial esophageal scaffold and be expected to be used for clinical in the future.

Tissue-Adhesive Decellularized Extracellular Matrix Patches Reinforced by a Supramolecular Gelator to Repair Abdominal Wall Defects

Implantation of surgical meshes composed of synthetic and biological materials has been applied for abdominal wall defect repair. Despite many efforts, there are no reliable meshes that fully satisfy clinical requirements because of their lack of biodegradability, mechanical strength, and tissue-adhesive properties. Here, we report biodegradable, decellularized extracellular matrix (dECM)-based biological patches to treat abdominal wall defects. By incorporating a water-insoluble supramolecular gelator that forms physical cross-linking networks through intermolecular hydrogen bonding, dECM patches were reinforced to improve mechanical strength. Reinforced dECM patches possessed higher tissue adhesion strength and underwater stability compared with the original dECM because of enhanced interfacial adhesion strength. In vivo experiments using an abdominal wall defect rat model showed that reinforced dECM patches induced collagen deposition and the formation of blood vessels during material degradation, and the accumulation of CD68-positive macrophages was suppressed compared to nonbiodegradable synthetic meshes. Tissue-adhesive and biodegradable dECM patches with improved mechanical strength by a supramolecular gelator have enormous potential for use in the repair of abdominal wall defects.

Preparation and Characterization of Polylactic Acid/Nano Hydroxyapatite/Nano Hydroxyapatite/Human Acellular Amniotic Membrane (PLA/nHAp/HAAM) Hybrid Scaffold for Bone Tissue Defect Repair

Bone tissue engineering is a novel and efficient repair method for bone tissue defects, and the key step of the bone tissue engineering repair strategy is to prepare non-toxic, metabolizable, biocompatible, bone-induced tissue engineering scaffolds of suitable mechanical strength. Human acellular amniotic membrane (HAAM) is mainly composed of collagen and mucopolysaccharide; it has a natural three-dimensional structure and no immunogenicity. In this study, a polylactic acid (PLA)/Hydroxyapatite (nHAp)/Human acellular amniotic membrane (HAAM) composite scaffold was prepared and the porosity, water absorption and elastic modulus of the composite scaffold were characterized. After that, the cell-scaffold composite was constructed using newborn Sprague Dawley (SD) rat osteoblasts to characterize the biological properties of the composite. In conclusion, the scaffolds have a composite structure of large and small holes with a large pore diameter of 200 μm and a small pore diameter of 30 μm. After adding HAAM, the contact angle of the composite decreases to 38.7°, and the water absorption reaches 249.7%. The addition of nHAp can improve the scaffold's mechanical strength. The degradation rate of the PLA+nHAp+HAAM group was the highest, reaching 39.48% after 12 weeks. Fluorescence staining showed that the cells were evenly distributed and had good activity on the composite scaffold; the PLA+nHAp+HAAM scaffold has the highest cell viability. The adhesion rate to HAAM was the highest, and the addition of nHAp and HAAM could promote the rapid adhesion of cells to scaffolds. The addition of HAAM and nHAp can significantly promote the secretion of ALP. Therefore, the PLA/nHAp/HAAM composite scaffold can support the adhesion, proliferation and differentiation of osteoblasts in vitro which provide sufficient space for cell proliferation, and is suitable for the formation and development of solid bone tissue.

Feasibility study of oxidized naringin as a novel crosslinking agent for crosslinking decellularized porcine Achilles tendon and its potential application for anterior cruciate ligament repair

Naringin (Nar), a natural flavanone glycoside, has been shown to possess a variety of biological activities, including anti-inflammatory, anti-apoptotic, bone formation, and so forth. In this study, Nar was oxidized by sodium periodate and the oxidized naringin (ONar) was used as a novel biological crosslinking agent. In addition, ONar-fixed porcine decellularized Achilles tendon (DAT) was developed to substitute anterior cruciate ligament (ACL) for researching a novel ACL replacement material. The ONar with a 24 h oxidation time had appropriate aldehyde group content, almost no cytotoxicity, and a good crosslinking effect. The critical characteristics and cytocompatibility of ONar-fixed DAT were also investigated. The results demonstrated that 1% ONar-fixed DAT exhibited good resistance to enzymatic degradation and thermal stability as well as suitable mechanical strength. Moreover, 1% ONar-fixed specimens exhibited excellent L929 fibroblasts-cytocompatibility and MC3T3-E1-cytocompatibility. They also promoted the secretion of hepatocyte growth factor (HGF) and basic fibroblast growth factor (bFGF) from fibroblasts and bone morphogenetic protein-2 (BMP-2) from osteoblasts. And they also showed the good anti-inflammatory properties in vivo experiments. Our data provided an experimental basis for ONar as a new cross-linking reagent in chemical modification of DAT and ONar-fixed DAT for ACL repair.

Development of a decellularized human amniotic membrane-based electrospun vascular graft capable of rapid remodeling for small-diameter vascular applications

The performance of small-diameter vascular grafts adapted to vascular replacement is commonly hindered by stenosis. To address this issue, a graft featuring rapid remodeling with degradation is warranted. In this work, a 1.8-mm-diameter graft was constructed by fabricating a decellularized human amniotic membrane (HAM) with polycaprolactone (PCL)/silk fibroin (SF) around it through electrospinning, namely, an HPS graft, and applied in a rat aortic grafting model for comparison to a decellularized porcine small intestinal submucosa (SIS)-integrated PCL/SF (SPS) graft and an autologous aorta. In vitro studies demonstrated that HAM provided a bioactive milieu for rapid endothelial cell proliferation and resisting fibroblast-induced collagen secretion. PCL/SF provides a biocompatible microenvironment for cellular infiltration with mechanical properties resembling those of the rat aorta. In vivo studies showed that the HPS graft induced functional endothelialization more rapidly, along with less intensive ECM deposition than the SPS graft upon the histologically weaker inflammatory response and foreign body reaction 4 weeks after implantation, and maintained patency by progressively stabilizing the remodeling structure approximating the native counterparts over 24 weeks. The bioengineered graft expands the applicability of allogeneic matrices with degradable electrospun polymers for long-term in situ vascular applications. STATEMENT OF SIGNIFICANCE: An orchestrated remodeling of the vascular graft, featuring rapid endothelialization and resisting extracellular matrix (ECM) deposition on the luminal surface, with a mechanically stable structure, is requisite for long-term vascular patency. Nevertheless, off-the-shelf grafts might not fulfil the criteria under abdominal aortic pressure. Herein, we fabricated a 1.8-mm-diameter vascular graft through the integration of a decellularized human amniotic membrane (HAM) with electrospun polycaprolactone (PCL)/silk fibroin (SF). In a rat aortic grafting model, the graft is capable of rapid endothelialization and resisting collagen deposition and provides a native-like mechanical structure for stabilizing the remodeling process towards that of the native aorta. This bioengineered graft has potential for small-diameter vascular regeneration, and provides advanced strategies to facilitate full-remodeling tissue applications.

The evaluation of functional small intestinal submucosa for abdominal wall defect repair in a rat model: Potent effect of sequential release of VEGF and TGF-β1 on host integration

Ineffective vessel penetration and extracellular matrix (ECM) remodeling are responsible for the failure of porcine small intestinal submucosa (SIS)-repaired abdominal wall defects. Combined growth factors could be used as directing signals in a nature-mimicking strategy to improve this repair through mesh functionalization. In this work, vascular endothelial growth factor (VEGF) and transforming growth factor β1 (TGF-β1) were incorporated into a silk fibroin membrane via coaxial aqueous electrospinning to exploit their benefits of biological interactions. The membrane was sandwiched into the SIS bilayer as a functional mesh to repair partial-thickness defects in a rat model. Membrane characterization demonstrated that the core-shell structure ensured the independent distribution and sequential release of two regulators and protection of their bioactivities, which were confirmed by cell viability and protein expression. The mesh was further assessed to facilitate vasculature formation and collagen secretion in vitro, and exhibited better host integration than VEGF- or TGF-β1-containing mesh and developed reinforced mechanical properties compared with the VEGF-containing mesh after 28 days in vivo. Determination of the underlying biological interactions revealed that rapid VEGF release promotes angiogenesis and collagen secretion but initially potentiates the inflammatory response. Sustained TGF-β1 release at relatively low concentrations promoted VEGF for vessel permeation and maturation and steadily induced ECM remodeling under milder foreign body reactions. The functionalization of SIS improves repair by sufficient integration with timely remodeling and helps elucidate the related regulatory interactions.

Feasibility study of oxidized hyaluronic acid cross-linking acellular bovine pericardium with potential application for abdominal wall repair

Bovine pericardium(BP)is one of the biological membranes with extensive application in tissue engineering. To fully investigate the potential clinical applications of this natural biological material, a suitable cross-linking reagent is hopefully adopted for modification. Glutaraldehyde (GA) is a clinically most common synthetic cross-linking reagent. In the study, oxidized hyaluronic acid (AHA) was developed to substitute GA to fix acellular bovine pericardium (ABP) for lower cytotoxicity, aiming to evaluate the feasibility of AHA as a cross-linking reagent and develop AHA-fixed ABP as a biological patch for abdominal wall repair. The AHA with the feeding ratio (1.8:1.0) has an appropriate molecular weight and oxidation degree, almost no cytotoxicity and good cross-linking effect. The critical cross-linking characteristics and cytocompatibility of AHA-fixed ABP were also investigated. The results demonstrated that 2.0% AHA-fixed ABP had the most suitable mechanical properties, thermal stability, resistance to enzymatic degradation and hydrophilicity. Moreover, 2.0% AHA-fixed samples exhibited an excellent cytocompatibility with human peritoneal mesothelial cells (HPMC) and low antigenicity. It also showed a prominent anti-calcification ability required for abdominal wall repair. Our data provided experimental basis for future research on AHA as a new cross-linking reagent and AHA-fixed ABP for abdominal wall repair.

Tailoring electrospun mesh for a compliant remodeling in the repair of full-thickness abdominal wall defect - The role of decellularized human amniotic membrane and silk fibroin

Tailored electrospun meshes have been increasingly explored for abdominal wall defect repair in preclinical and clinical studies. However, the fabrication of a bioengineered mesh adapts to the intraperitoneal repair for a compliant remodeling remains a great challenge. In this study, we fabricated a functional mesh by combining polycaprolactone (PCL) with silk fibroin (SF) and decellularized human amniotic membrane (HAM) proportionally via electrospinning. SF was integrated with PCL (40:60 w/w) to regulate the structural flexibility. Micronized HAM was incorporated to PCL/SF (10:90 w/w) to provide a biocompatible milieu with functions being conferred to facilitate intraperitoneal repair. After the blend electrospinning, the PCL/SF/HAM mesh was characterized in vitro and implanted into the rat model with a full-thickness defect for a comprehensive evaluation in comparison to the PCL and PCL/SF meshes. The results demonstrated that electrospinning fabricated PCL stabilized the mechanical elongation toward approximating the native counterparts after integrating with SF. After integrating with HAM, which is coupled with diverse biomolecular compositions, the developed PCL/SF/HAM mesh provided a better microenvironment for cell proliferation and vasculogenic network over other meshes without HAM addition and possessed the functions capable of inhibiting transforming growth factor β1 (TGF-β1) expression and collagen secretion under inflammatory conditions. Moreover, the functional mesh developed less-intensive adhesion along with histologically weaker inflammatory response and foreign body reaction than the PCL and PCL/SF meshes after 90 days in vivo. During the remodeling process, the bioactive structure induced more pronounced neovascularization and remarkable incorporation of collagen and elastin fibers and contractile filaments for a mechanically sufficient and physiologically stiffness-matched healing. This tailor-made mesh expands the intraperitoneal applicability of conventional electrospun meshes for a compliant remodeling in the repair of abdominal wall defects.

Topological Structure Design and Fabrication of Biocompatible PLA/TPU/ADM Mesh with Appropriate Elasticity for Hernia Repair

The meshes for hernia repair result in many problems that are related to complications including chronic pain and limited movement due to inadequate mechanical strength, non-absorbability, or low elasticity. In this study, degradable polylactic acid (PLA), synthetic thermoplastic polyurethane (TPU), and acellular dermal matrix (ADM) powders are combined to prepare a novel PLA/TPU/ADM mesh with three different topological structures (square, circular, and diamond) by 3D printing. The physicochemical properties and structural characteristics of mesh are studied, the results show that the diamond structure mesh with the pore size of 3 mm has sufficient elasticity and tensile strength, which provides the efficient mechanical strength required for hernia repair (16 N cm^-1 ) and the value more than polypropylene(PP) mesh. Besides, in vitro and in vivo experiments demonstrate human umbilical vein endothelial cells could successfully proliferate on the PLA/TPU/ADM mesh whose biocompatibility with the host is shown using a rat model of abdominal wall defect. In conclusion, the results of this study demonstrate that the PLA/TPU/ADM mesh may be considered a good choice for hernia repair as its potential to overcome the elastic and strength challenges associated with a highly flexible abdominal wall, as well as its good biocompatibility.

Functionalized Strategies and Mechanisms of the Emerging Mesh for Abdominal Wall Repair and Regeneration

Meshes have been the overwhelmingly popular choice for the repair of abdominal wall defects to retrieve the bodily integrity of musculofascial layer. Broadly, they are classified into synthetic, biological and composite mesh based on their mechanical and biocompatible features. With the development of anatomical repair techniques and the increasing requirements of constructive remodeling, however, none of these options satisfactorily manages the conditional repair. In both preclinical and clinical studies, materials/agents equipped with distinct functions have been characterized and applied to improve mesh-aided repair, with the importance of mesh functionalization being highlighted. However, limited information exists on systemic comparisons of the underlying mechanisms with respect to functionalized strategies, which are fundamental throughout repair and regeneration. Herein, we address this topic and summarize the current literature by subdividing common functions of the mesh into biomechanics-matched, macrophage-mediated, integration-enhanced, anti-infective and antiadhesive characteristics for a comprehensive overview. In particular, we elaborate their effects separately with respect to host response and integration and discuss their respective advances, challenges and future directions toward a clinical alternative. From the vastly different approaches, we provide insight into the mechanisms involved and offer suggestions for personalized modifications of these emerging meshes.