Novel Biomimic Crystalline Colloidal Array for Fast Detection of Trace Parathion

A Robust Method for the Elaboration of SiO2-Based Colloidal Crystals as a Template for Inverse Opal Structures

Photonic crystals (PCs) are nanomaterials with photonic properties made up of periodically modulated dielectric materials that reflect light between a wavelength range located in the photonic band gap. Colloidal PCs (C-PC) have been proposed for several applications such as optical platforms for the formation of physical, chemical, and biological sensors based on a chromatic response to an external stimulus. In this work, a robust protocol for the elaboration of photonic crystals based on SiO₂ particle (SP) deposition using the vertical lifting method was studied. A wide range of lifting speeds and particle suspension concentrations were investigated by evaluating the C-PC reflectance spectrum. Thinner and higher reflectance peaks were obtained with a decrease in the lifting speed and an increase in the SP concentrations up to certain values. Seven batches of twelve C-PCs employing a SP 3% suspension and a lifting speed of 0.28 µm/s were prepared to test the reproducibility of this method. Every C-PC fabricated in this assay has a wavelength peak in a range of 10 nm and a peak width lower than 90 nm. Inverse-opal polymeric films with a highly porous and interconnected morphology were obtained using the developed C-PC as a template. Overall, these results showed that reproducible colloidal crystals could be elaborated on a large scale with a simple apparatus in a short period, providing a step forward in the scale-up of the fabrication of photonic colloidal crystal and IO structures as those employed for the elaboration of photonic polymeric sensors.

Aptamer-based photonic crystals enable ultra-trace detection of staphylococcal enterotoxin B without labels

Staphylococcal enterotoxin B (SEB) is one of the most common serotypes in staphylococcal food-poisoning cases. A rapid, sensitive, and simple method for SEB detection is crucial for public health. A photonic crystal (PC) sensing material for label-free detection of ultra-trace SEB was proposed in this study. Gold nanoparticle-doped silica microspheres were stacked to form an opal PC through self-assembly, and SEB aptamers, as the recognition element, were modified onto the PC. When the target protein of SEB came in contact with the PC sensing material, the reflection peak intensity of PCs decreased accordingly. The detection range was 1 × 10^-6 to 1 ng mL^-1, and the detection limit was 0.103 × 10^-6 ng mL^-1. Furthermore, the PC sensing material had great specificity and accuracy, which can be used for real sample monitoring. This PC sensing material achieved ultra-sensitive detection, which did not involve complicated preparation processes and reporter labelling.

Recent Advances in Sensing Applications of Molecularly Imprinted Photonic Crystals

Photonic crystals (PhCs) with a brightly colored structure are novel materials and are widely used in chemical and biological sensing. Combining PhCs with molecular imprinting technology (MIT), the molecularly imprinted PhC (MIPC) sensors are fabricated, which can specifically recognize the target molecules. Aside from high sensitivity and selectivity, the MIPC sensors could recognize the naked eye detection because of its optical properties. In this review, an overview of recent advances in sensing applications of MIPC sensors including the responsive mechanisms, application in environmental monitoring, and the application to human health were illustrated. The MIPC sensors all responded to the analytes specifically and also showed high sensitivity in real samples, which provided a method to realize the rapid, convenient, naked eye, and real-time detection. Furthermore, the current limitations and potential future directions of MIPC sensors were also discussed.

Sensitive and label-free chemiluminescence detection of malathion using exonuclease-assisted dual signal amplification and G-quadruplex/hemin DNAzyme

Malathion is one of the most commonly used organophosphorus pesticides that can cause serious harm to the ecological environment and human health. Herein, we demonstrated a label-free chemiluminescent aptasensor for the sensitive detection of malathion based on exonuclease-assisted dual signal amplification and G-quadruplex/hemin DNAzyme. Upon the addition of malathion, the aptamer probe specifically bound to the target to form a complex malathion-S3, leaving a duplex S1-S2. The complex malathion-S3 was digested by exonuclease I and the target was released. The released target was recycled to perform exonuclease I-assisted signal amplification. Furthermore, after treatment with exonuclease III, the duplex S1-S2 was converted into the secondary target ST. The secondary target ST interacted with the hairpin H1 to form a complex H1-ST, which was further digested by exonuclease III and released the secondary target. The released secondary target was recycled to perform exonuclease III-assisted signal amplification. After complete amplification, large numbers of G-quadruplex/hemin DNAzymes were generated. Under the optimal experimental conditions, the prepared aptasensor showed an excellent linear response to malathion with a detection limit of 0.47 pM. The relative standard deviations were in the range of 4.2-6.9%. Moreover, the aptasensor was successfully applied to detect malathion in spiked food and traditional Chinese medicine samples.

Detection of chlorantraniliprole residues in tomato using field-deployable MIP photonic sensors

A photonic sensor based on inversed opal molecular imprinted polymer (MIP) film to detect the presence of chlorantraniliprole (CHL) residue in tomatoes was developed. Acrylic acid was polymerized in the presence of CHL inside the structure of a colloidal crystal, followed by etching of the colloids and CHL elution. Colloidal crystals and MIP films were characterized by scanning electron microscopy and FT-IR, confirming the inner structure and chemical structure of the material. MIP films supported on polymethylmethacrylate (PMMA) slides were incubated in aqueous solutions of the pesticide and in blended tomato samples. The MIP sensor displayed shifts of the peak wavelength of the reflection spectra in the visible range when incubated in CHL concentrations between 0.5 and 10 μg L^-1, while almost no peak displacement was observed for non-imprinted (NIP) films. Whole tomatoes were blended into a liquid and spiked with CHL; the sensor was able to detect CHL residues down to 0.5 μg kg^-1, significantly below the tolerance level established by the US Environmental Protection Agency of 1.4 mg kg^-1. Stable values were reached after about 30-min incubation in test samples. Control samples (unspiked processed tomatoes) produced peak shifts both in MIP and NIP films; however, this matrix effect did not affect the detection of CHL in the spiked samples. These promising results support the application of photonic MIP sensors as an economical and field-deployable screening tool for the detection of CHL in crops.

Development and perspectives of rapid detection technology in food and environment

Food safety become a hot issue currently with globalization of food trade and food supply chains. Chemical pollution, microbial contamination and adulteration in food have attracted more attention worldwide. Contamination with antibiotics, estrogens and heavy metals in water environment and soil environment have also turn into an enormous threat to food safety. Traditional small-scale, long-term detection technologies have been unable to meet the current needs. In the monitoring process, rapid, convenient, accurate analysis and detection technologies have become the future development trend. We critically synthesizing the current knowledge of various rapid detection technology, and briefly touched upon the problem which still exist in research process. The review showed that the application of novel materials promotes the development of rapid detection technology, high-throughput and portability would be popular study directions in the future. Of course, the ultimate aim of the research is how to industrialization these technologies and apply to the market.

Molecular Imprinted Polymers Coupled to Photonic Structures in Biosensors: The State of Art

Optical sensing, taking advantage of the variety of available optical structures, is a rapidly expanding area. Over recent years, whispering gallery mode resonators, photonic crystals, optical waveguides, optical fibers and surface plasmon resonance have been exploited to devise different optical sensing configurations. In the present review, we report on the state of the art of optical sensing devices based on the aforementioned optical structures and on synthetic receptors prepared by means of the molecular imprinting technology. Molecularly imprinted polymers (MIPs) are polymeric receptors, cheap and robust, with high affinity and selectivity, prepared by a template assisted synthesis. The state of the art of the MIP functionalized optical structures is critically discussed, highlighting the key progresses that enabled the achievement of improved sensing performances, the merits and the limits both in MIP synthetic strategies and in MIP coupling.

Oriented boronate affinity-imprinted inverse opal hydrogel for glycoprotein assay via colorimetry

A biomimetic antibody is described for colorimetric determination of glycoprotein, and horseradish peroxidase (HRP) is used as model analyte. Use is made of oriented surface imprinted inverse opal hydrogel particles functionalized with phenylboronic acid. The inverse opal hydrogel particles were negatively replicated from silica colloidal crystal beads (SCCBs), so that they were endowed with larger specific surface area than the bulk structure. Benefit from that, there were abundant surface molecularly imprinting sites in the hydrogel particles. Because the imprinting sites match the structure of the template molecules, they can recognize HRP with high selectivity and sensitivity. The recognized glycoprotein was bonded with the phenylboronic acid within the sites. The bonded HRP was determined by colorimetry of 3, 3', 5, 5'-tetramethylbenzidine (TMB) single-component solution at 450 nm, and it shows a 16.03 imprinting factor under optimized conditions. Alpha-fetoprotein (AFP) was also investigated and demostrated the value of this strategy in practical applications. The results show that the absorbance increases linearly in the 1-50 ng mL^-1 AFP concentration range and has a 1.32 ng mL^-1 detection limit. The assay of human serum was realized by the standard addition method. This strategy is promising to open new horizons for glycoprotein assay. Graphical abstract Schematic representation of the preparation of oriented boronate affinity-imprinted inverse opal hydrogel particles for glycoprotein assay.

Sandwich-Like Sensor for the Highly Specific and Reproducible Detection of Rhodamine 6G on a Surface-Enhanced Raman Scattering Platform

Nonspecificity and low reproducibility are always the main challenges in surface-enhanced Raman scattering (SERS) detection, especially for testing real samples. In this study, we developed a sandwich-like sensor (AuA-pMIP) to detect rhodamine 6G (R6G) by integrating a porous molecularly imprinted polymer (pMIP) with a well-ordered AuNP array (AuA). To form a uniformly distributed hot spot, AuA was fabricated at an oil-water interface and was subsequently fixed between pMIP and a support slide. Finite-difference time-domain simulation indicated that the enhanced electric field covered a distance of ∼2 μm above the AuA, in which the pMIP provided effective mass-transfer channels and sufficient specific binding sites for target molecules. High specificity for AuA-pMIP in R6G detection was demonstrated by comparing the SERS performance of R6G on AuA-pMIP with that of its structural analogues on the same sensor. Remarkably, the stable sandwich-like structure allowed us to achieve a recyclable SERS sensor with high reproducibility. Finally, AuA-pMIP displayed excellent specificity and sensitivity toward R6G in a test based on a real orange juice sample. This study presents a promising method to achieve real sample testing on a SERS platform.

Molecularly Imprinted Polymer-Based Hybrid Materials for the Development of Optical Sensors

We report on the development of new optical sensors using molecularly imprinted polymers (MIPs) combined with different materials and explore the novel strategies followed in order to overcome some of the limitations found during the last decade in terms of performance. This review pretends to offer a general overview, mainly focused on the last 3 years, on how the new fabrication procedures enable the synthesis of hybrid materials enhancing not only the recognition ability of the polymer but the optical signal. Introduction describes MIPs as biomimetic recognition elements, their properties and applications, emphasizing on each step of the fabrication/recognition procedure. The state of the art is presented and the change in the publication trend between electrochemical and optical sensor devices is thoroughly discussed according to the new fabrication and micro/nano-structuring techniques paving the way for a new generation of MIP-based optical sensors. We want to offer the reader a different perspective based on the materials science in contrast to other overviews. Different substrates for anchoring MIPs are considered and distributed in different sections according to the dimensionality and the nature of the composite, highlighting the synergetic effect obtained as a result of merging both materials to achieve the final goal.

The visual detection of anesthetics in fish based on an inverse opal photonic crystal sensor

A novel smart sensor for the rapid and label-free detection of benzocaine has been developed based on the combination of photonic crystal (PC) and molecular imprinting polymer (MIP) techniques. A molecularly imprinted photonic crystal (MIPC) hydrogel film was prepared via a non-covalent, self-assembly approach with a PC mould. With a highly ordered inverse opal structure, the resulting benzocaine MIPC exhibited high sensitivity, smart specificity, quick response times and good regeneration abilities. It can give rise to a readable optical signal and color change upon binding with benzocaine, with a detection limit of 16.5 μg mL-1. The sensor has been successfully used to visually estimate benzocaine concentrations in fish samples. In comparison with HPLC, the developed MIPC sensor has shown satisfactory accuracy in terms of results. It has great potential for on-site screening and the visual detection of trace benzocaine in real samples.

High-Performance and Multifunctional Colorimetric Humidity Sensors Based on Mesoporous Photonic Crystals and Nanogels

Colorimetric sensors, as a key branch of the application of photonic crystals (PCs), brings enthusiasm to scientists to do research. Here, simple mesoporous and structurally colored one-dimensional photonic crystals (1DPCs) constructed by alternating assembly of poly(acrylamide- N,N'-methylene bis(acrylamide)) (P(AM-MBA)) nanogels and TiO₂ nanoparticles are reported as high-performance colorimetric humidity sensors. The sensors with bright colors display rapid response to relative humidity (RH) change and reach sensing balance in 0.5 s. By varying RH from 47.0% to 89.3%, stopband of a sensor changes from 426 to 668 nm, almost spanning the whole visible range. Meanwhile, visual sensing of RH possesses good reversibility and repeatability. Moreover, the sensors with delicate patterns are facilely fabricated by partial UV photodegradation of the polymer layers with nano TiO₂ as catalyst. The delicate patterns and backgrounds show different colors and change color simultaneously and quickly by varying the ambient humidity. Accurate QR code pattern is also realized on the PC sensor; it is found successful reading of the data is only achieved by increasing RH to realize high color contrast between the code and background. Given their excellent properties, the porous hybrid PCs are promising as high-performance humidity sensors with potential display, decoration, information-storage, and encryption functions.