1
|
Wang R, Li J, Bi Q, Yang B, He T, Lin K, Zhu X, Zhang K, Jin R, Huang C, Nie Y, Zhang X. Crystallographic plane-induced selective mineralization of nanohydroxyapatite on fibrous-grained titanium promotes osteointegration and biocorrosion resistance. Biomaterials 2025; 313:122800. [PMID: 39241551 DOI: 10.1016/j.biomaterials.2024.122800] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/03/2024] [Revised: 08/21/2024] [Accepted: 09/01/2024] [Indexed: 09/09/2024]
Abstract
The (002) crystallographic plane-oriented hydroxyapatite (HA) and anatase TiO2 enable favorable hydrophilicity, osteogenesis, and biocorrosion resistance. Thus, the crystallographic plane control in HA coating and crystalline phase control in TiO2 is vital to affect the surface and interface bioactivity and biocorrosion resistance of titanium (Ti) implants. However, a corresponding facile and efficient fabrication method is absent to realize the HA(002) mineralization and anatase TiO2 formation on Ti. Herein, we utilized the predominant Ti(0002) plane of the fibrous-grained titanium (FG Ti) to naturally form anatase TiO2 and further achieve a (002) basal plane oriented nanoHA (nHA) film through an in situ mild hydrothermal growth strategy. The formed FG Ti-nHA(002) remarkably improved hydrophilicity, mineralization, and biocorrosion resistance. Moreover, the nHA(002) film reserved the microgroove-like topological structure on FG Ti. It could enhance osteogenic differentiation through promoted contact guidance, showing one order of magnitude higher expression of osteogenic-related genes. On the other hand, the nHA(002) film restrained the osteoclast activity by blocking actin ring formation. Based on these capacities, FG Ti-nHA(002) improved new bone growth and binding strength in rabbit femur implantation, achieving satisfactory osseointegration within 2 weeks.
Collapse
Affiliation(s)
- Ruohan Wang
- National Engineering Research Centre for Biomaterials, College of Biomedical Engineering, Sichuan University, Chengdu, 610065, China
| | - Juan Li
- Department of Orthodontics, West China School of Stomatology, State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Qunjie Bi
- National Engineering Research Centre for Biomaterials, College of Biomedical Engineering, Sichuan University, Chengdu, 610065, China
| | - Binbin Yang
- National Engineering Research Centre for Biomaterials, College of Biomedical Engineering, Sichuan University, Chengdu, 610065, China; The Affiliated Stomatological Hospital, Southwest Medical University, Luzhou, Sichuan, 646000, China
| | - Ting He
- National Engineering Research Centre for Biomaterials, College of Biomedical Engineering, Sichuan University, Chengdu, 610065, China
| | - Kaifeng Lin
- Department of Orthodontics, West China School of Stomatology, State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, 610041, China
| | - Xiangdong Zhu
- National Engineering Research Centre for Biomaterials, College of Biomedical Engineering, Sichuan University, Chengdu, 610065, China
| | - Kai Zhang
- National Engineering Research Centre for Biomaterials, College of Biomedical Engineering, Sichuan University, Chengdu, 610065, China
| | - Rongrong Jin
- National Engineering Research Centre for Biomaterials, College of Biomedical Engineering, Sichuan University, Chengdu, 610065, China.
| | - Chongxiang Huang
- National Engineering Research Centre for Biomaterials, College of Biomedical Engineering, Sichuan University, Chengdu, 610065, China; School of Aeronautics and Astronautics, Sichuan University, Chengdu, 610065, China
| | - Yu Nie
- National Engineering Research Centre for Biomaterials, College of Biomedical Engineering, Sichuan University, Chengdu, 610065, China.
| | - Xingdong Zhang
- National Engineering Research Centre for Biomaterials, College of Biomedical Engineering, Sichuan University, Chengdu, 610065, China
| |
Collapse
|
2
|
Anwer AH, Ahtesham A, Shoeb M, Mashkoor F, Ansari MZ, Zhu S, Jeong C. State-of-the-art advances in nanocomposite and bio-nanocomposite polymeric materials: A comprehensive review. Adv Colloid Interface Sci 2023; 318:102955. [PMID: 37467558 DOI: 10.1016/j.cis.2023.102955] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/09/2023] [Revised: 05/23/2023] [Accepted: 06/20/2023] [Indexed: 07/21/2023]
Abstract
The modern eco-friendly materials used in research and innovation today consist of nanocomposites and bio-nanocomposite polymers. Their unique composite properties make them suitable for various industrial, medicinal, and energy applications. Bio-nanocomposite polymers are made of biopolymer matrices that have nanofillers dispersed throughout them. There are several types of fillers that can be added to polymers to enhance their quality, such as cellulose-based fillers, clay nanomaterials, carbon black, talc, carbon quantum dots, and many others. Biopolymer-based nanocomposites are considered a superior alternative to traditional materials as they reduce reliance on fossil fuels and promote the use of renewable resources. This review covers the current state-of-the-art in nanocomposite and bio-nanocomposite materials, focusing on ways to improve their features and the various applications they can be used for. The review article also investigates the utilization of diverse nanocomposites as a viable approach for developing bio-nanocomposites. It delves into the underlying principles that govern the synthesis of these materials and explores their prospective applications in the biomedical field, food packaging, sensing (Immunosensors), and energy storage devices. Lastly, the review discusses the future outlook and current challenges of these materials, with a focus on sustainability.
Collapse
Affiliation(s)
- Abdul Hakeem Anwer
- School of Mechanical Engineering, Yeungnam University, Gyeongsan, Gyeongbuk 38541, Republic of Korea
| | - Afreen Ahtesham
- School of Chemical Sciences University Sains Malaysia, Penang, Malaysia
| | - Mohd Shoeb
- School of Mechanical Engineering, Yeungnam University, Gyeongsan, Gyeongbuk 38541, Republic of Korea
| | - Fouzia Mashkoor
- School of Mechanical Engineering, Yeungnam University, Gyeongsan, Gyeongbuk 38541, Republic of Korea
| | - Mohd Zahid Ansari
- School of Materials Science and Engineering, Yeungnam University, Gyeongsan, Gyeongbuk, 38541, Republic of Korea
| | - Shushuai Zhu
- School of Mechanical Engineering, Yeungnam University, Gyeongsan, Gyeongbuk 38541, Republic of Korea
| | - Changyoon Jeong
- School of Mechanical Engineering, Yeungnam University, Gyeongsan, Gyeongbuk 38541, Republic of Korea.
| |
Collapse
|
3
|
Sahare P, Alvarez PG, Yanez JMS, Bárcenas JGL, Chakraborty S, Paul S, Estevez M. Engineered titania nanomaterials in advanced clinical applications. BEILSTEIN JOURNAL OF NANOTECHNOLOGY 2022; 13:201-218. [PMID: 35223351 PMCID: PMC8848344 DOI: 10.3762/bjnano.13.15] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/01/2021] [Accepted: 02/03/2022] [Indexed: 06/06/2023]
Abstract
Significant advancement in the field of nanotechnology has raised the possibility of applying potent engineered biocompatible nanomaterials within biological systems for theranostic purposes. Titanium dioxide (titanium(IV) oxide/titania/TiO2) has garnered considerable attention as one of the most extensively studied metal oxides in clinical applications. Owing to the unique properties of titania, such as photocatalytic activity, excellent biocompatibility, corrosion resistance, and low toxicity, titania nanomaterials have revolutionized therapeutic approaches. Additionally, titania provides an exceptional choice for developing innovative medical devices and the integration of functional moieties that can modulate the biological responses. Thus, the current review aims to present a comprehensive and up-to-date overview of TiO2-based nanotherapeutics and the corresponding future challenges.
Collapse
Affiliation(s)
- Padmavati Sahare
- Centre of Applied Physics and Advanced Technologies (CFATA), National Autonomous University of Mexico, Queretaro, Mexico
| | - Paulina Govea Alvarez
- Centre of Applied Physics and Advanced Technologies (CFATA), National Autonomous University of Mexico, Queretaro, Mexico
| | - Juan Manual Sanchez Yanez
- Instituto de Investigaciones Químico Biológicas, Universidad Michoacana de San Nicolas de Hidalgo, Morelia, Mexico
| | | | - Samik Chakraborty
- Division of Nephrology, Boston Children’s Hospital, Harvard Medical School, Boston, MA 02115, USA
| | - Sujay Paul
- Tecnologico de Monterrey, School of Engineering and Sciences, Campus Queretaro, Av. Epigmenio Gonzalez, No. 500 Fracc. San Pablo, CP 76130 Querétaro, Mexico
| | - Miriam Estevez
- Centre of Applied Physics and Advanced Technologies (CFATA), National Autonomous University of Mexico, Queretaro, Mexico
| |
Collapse
|
4
|
Matusiak J, Maciołek U, Kosińska-Pezda M, Sternik D, Orzeł J, Grządka E. Textural and Thermal Properties of the Novel Fucoidan/Nano-Oxides Hybrid Materials with Cosmetic, Pharmaceutical and Environmental Potential. Int J Mol Sci 2022; 23:ijms23020805. [PMID: 35054994 PMCID: PMC8775903 DOI: 10.3390/ijms23020805] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/20/2021] [Revised: 01/07/2022] [Accepted: 01/09/2022] [Indexed: 02/04/2023] Open
Abstract
The main purpose of the research was to obtain and study hybrid materials based on three different nano-oxides commonly used in the cosmetic and pharmaceutical industries: Al2O3, TiO2, and ZnO, with the natural bioactive polysaccharide fucoidan. Since the mentioned oxides are largely utilized by industry, there is no doubt that the presented studies are important from an environmental point of view. On the basis of the textural studies (dynamic light scattering DLS, low temperature nitrogen adsorption, X-ray diffraction analysis XRD, scanning electron microscopy SEM) it was proved that the properties of the hybrid materials differ from the pure components of the system. Moreover, the advanced thermal analysis (TG-DTG-DSC) combined with the evolved gas analysis using Fourier transformed infrared spectroscopy (FTIR) and mass spectrometry were applied to describe the thermal decomposition of fucoidan, oxides and hybrid materials. It was found that the interactions between the polymer and the oxides results in the formation of the hybrid materials due to the functionalization of the nanoparticles surface, and that their thermal stability increased when compared to the pure substrates. Such findings definitely fill the literature void regarding the fucoidan based hybrid materials and help the industrial formulators in the preparation of new products.
Collapse
Affiliation(s)
- Jakub Matusiak
- Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Sklodowska University in Lublin, M. Curie-Sklodowska Sq. 3, 20-031 Lublin, Poland
- Correspondence:
| | - Urszula Maciołek
- Analytical Laboratory, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Sklodowska University in Lublin, M. Curie-Sklodowska Sq. 3, 20-031 Lublin, Poland;
| | - Małgorzata Kosińska-Pezda
- Department of Inorganic and Analytical Chemistry, Faculty of Chemistry, Rzeszow University of Technology, 35-959 Rzeszow, Poland;
| | - Dariusz Sternik
- Department of Physical Chemistry, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Sklodowska University in Lublin, M. Curie-Sklodowska Sq. 3, 20-031 Lublin, Poland;
| | - Jolanta Orzeł
- Department of Radiochemistry and Environmental Chemistry, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Sklodowska University in Lublin, M. Curie-Sklodowska Sq. 3, 20-031 Lublin, Poland; (J.O.); (E.G.)
| | - Elżbieta Grządka
- Department of Radiochemistry and Environmental Chemistry, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Sklodowska University in Lublin, M. Curie-Sklodowska Sq. 3, 20-031 Lublin, Poland; (J.O.); (E.G.)
| |
Collapse
|
5
|
Mai Z, Chen J, Cao Q, Hu Y, Dong X, Zhang H, Huang W, Zhou W. Rational design of hollow mesoporous titania nanoparticles loaded with curcumin for UV-controlled release and targeted drug delivery. NANOTECHNOLOGY 2021; 32:205604. [PMID: 33567415 DOI: 10.1088/1361-6528/abe4fe] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Curcumin (Cur), appeared to provide huge potential in biomedical application. However, its therapeutic efficacy was greatly limited as the result of poor solubility and instability. To address these limitations, we create a new type of hollow mesoporous titania nanoparticle (HMTN) to encapsulate Cur. HMTN was decorated with a layer of hydrophilic polyethylenimine (PEI), which controlled the release rate of Cur inside the pore due to its dendritic structure. Combined with the folic acid (FA) mediated targeting effect, the potential multifunctional Cur loaded titania nanoparticle (Cur-FA-PEI-HMTN) showed excellent biocompatibility and bioavailability, as well as the UV-responsive drug release properties. The operating parameters to prepare hollow structure were studied and the Cur-FA-PEI-HMTN nanosystem had been fully characterized by Brunauer-Emmet-Teller, Fourier transform infrared spectroscopy, transmission electron microscope, thermal gravity analysis, differential thermal analysis, x-ray diffraction, dynamic light scattering and zeta potential. In addition, the hemolytic test, as well as CCK8, flow cytometry, Hoechst 33342 staining experiment, were carried out to confirm the low cytotoxity and high biocompatibility. The confocal microscopy analysis results also revealed the increasing uptake of Cur@FA-PEI-HMTN by MCF-7 cells. The synthesized nanoparticles displayed great potential as drug nanovehicles with high biocompatibility.
Collapse
Affiliation(s)
- Zhuoxian Mai
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, Guangzhou, 510642, People's Republic of China
- Biomass 3D Printing Materials Research Center, College of Materials and Energy, South China Agricultural University, Guangzhou 510642, People's Republic of China
| | - Jiali Chen
- Department of Anatomy, Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering, Southern Medical University, Guangzhou 510515, People's Republic of China
| | - Qingyun Cao
- College of Animal Science, South China Agricultural University, Guangzhou 510642, People's Republic of China
| | - Yang Hu
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, Guangzhou, 510642, People's Republic of China
- Biomass 3D Printing Materials Research Center, College of Materials and Energy, South China Agricultural University, Guangzhou 510642, People's Republic of China
| | - Xianming Dong
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, Guangzhou, 510642, People's Republic of China
- Biomass 3D Printing Materials Research Center, College of Materials and Energy, South China Agricultural University, Guangzhou 510642, People's Republic of China
| | - Hongwu Zhang
- Department of Anatomy, Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering, Southern Medical University, Guangzhou 510515, People's Republic of China
| | - Wenhua Huang
- Department of Anatomy, Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering, Southern Medical University, Guangzhou 510515, People's Republic of China
| | - Wuyi Zhou
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, Guangzhou, 510642, People's Republic of China
- Biomass 3D Printing Materials Research Center, College of Materials and Energy, South China Agricultural University, Guangzhou 510642, People's Republic of China
| |
Collapse
|
6
|
Zhang J, Yan Z, Liu X, Zhang Y, Zou H, Le Y, Chen JF. Conductive Skeleton-Heterostructure Composites Based on Chrome Shavings for Enhanced Electromagnetic Interference Shielding. ACS APPLIED MATERIALS & INTERFACES 2020; 12:53076-53087. [PMID: 33169974 DOI: 10.1021/acsami.0c14300] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/22/2023]
Abstract
Renewable bio-based electromagnetic interference (EMI) shielding materials receive increasing attention undoubtedly. However, there is still a challenge to use raw biomass materials to construct a significant structure through an effortless and environmental route for EMI shielding applications. Herein, for the first time, we demonstrated a hybrid composite of multi-walled carbon nanotube/polypyrrole/chrome-tanned collagen fiber (MWCNT/PPy/CF), which utilized waste chrome shavings as a matrix. X-ray photoelectron spectroscopy reveals that the chromium on the CF has a binding effect on the PPy layer, which endows the tight integration between the CF and PPy layer. After the MWCNT network was loaded on the PPy layer, this ternary structure could provide stable conductive paths and a rich number of polarized interfaces. The MWCNT/PPy/CF composite exhibits superior electrical conductivity (354 ± 52 S/m), higher than PPy/CF (222 ± 38 S/m) and MWCNT/CF (104 ± 11 S/m), owing to the synergy of dual conductive structures. Notably, the shielding effectiveness (SE) value of the MWCNT/PPy/CF composite reaches 30 dB in the X band at a thickness of 0.48 mm. The shielding effectiveness of reflection (SER) (9.1 dB) is similar to that of PPy/CF (8.2 dB), while the shielding effectiveness of absorption (SEA) is significantly improved from 15.3 dB (PPy/CF) to 20.4 dB (MWCNT/PPy/CF) due to the additional coverage of the MWCNT network. This indicates the synergy between the MWCNT network and conductive PPy/CF skeleton. This work provided a method to prepare sustainable and low-cost renewable EMI shielding materials using chrome shavings. Meanwhile, this novel structure combining a conductive skeleton and heterostructure can be considered as a potential application in relevant fields.
Collapse
Affiliation(s)
- Jian Zhang
- State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, PR China
- Research Center of the Ministry of Education for High Gravity Engineering and Technology, Beijing University of Chemical Technology, Beijing 100029, PR China
| | - Zixuan Yan
- State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, PR China
| | - Xingzheng Liu
- State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, PR China
| | - Yu Zhang
- State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, PR China
| | - Haikui Zou
- Research Center of the Ministry of Education for High Gravity Engineering and Technology, Beijing University of Chemical Technology, Beijing 100029, PR China
| | - Yuan Le
- State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, PR China
- Research Center of the Ministry of Education for High Gravity Engineering and Technology, Beijing University of Chemical Technology, Beijing 100029, PR China
| | - Jian-Feng Chen
- State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, PR China
- Research Center of the Ministry of Education for High Gravity Engineering and Technology, Beijing University of Chemical Technology, Beijing 100029, PR China
| |
Collapse
|
7
|
Dai Z, Wen W, Guo Z, Song XZ, Zheng K, Xu X, Qi X, Tan Z. SiO2-coated magnetic nano-Fe3O4 photosensitizer for synergistic tumour-targeted chemo-photothermal therapy. Colloids Surf B Biointerfaces 2020; 195:111274. [DOI: 10.1016/j.colsurfb.2020.111274] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/04/2019] [Revised: 07/20/2020] [Accepted: 07/22/2020] [Indexed: 11/28/2022]
|
8
|
Ghorai SK, Maji S, Subramanian B, Maiti TK, Chattopadhyay S. Promoted Osteoconduction of Polyurethane-Urea Based 3D Nanohybrid Scaffold through Nanohydroxyapatite Adorned Hierarchical Titanium Phosphate. ACS APPLIED BIO MATERIALS 2019; 2:3907-3925. [PMID: 35021325 DOI: 10.1021/acsabm.9b00487] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
The lack of optimal physiological properties, bacterial colonization, and auto-osteoinduction, are the foremost issues of orthopedic implantations. In terms of bone healing, many researchers have reported the release of additional growth factors of the implanted biomaterials to accelerate the bone regeneration process. However, the additional growth factor may cause side effects such as contagion, nerve pain, and the formation of ectopic bone. Thus, the design of an osteoconductive scaffold having excellent biocompatibility, appropriate physicomechanical properties, and promoted auto osteoinductivity with antibacterial activity is greatly desired. In this study, 2D rodlike nanohydroxyapatite (nHA) adorned titanium phosphate (TP) with a flowerlike morphology was synthesized by a hydrothermal precipitation reaction. The nanohybrid material (nHA-TP) was incorporated into the synthesized polycaprolactone diol and spermine based thermoplastic polyurethane-urea (PUU) via in situ technique followed by salt leaching to fabricate the macroporous 3D polymer nanohybrid scaffold (PUU/nHA-TP). Structure explication of PUU was performed by NMR spectroscopy. The synthesized nanohybrid scaffold with 1% nHA-TP showed 67% increase of tensile strength and 18% improved modulus compared to the pristine PUU via formation of H-bonding or dative bonds between the metal and the amide linkage of the polyurethane or polyurea. In vitro study showing improved cell viability and proliferation of the seeded cell revealed the superior osteoconductivity of the nanohybrid scaffold. Most importantly, the in vivo experiments revealed a significant amount of bone regeneration in the nanohybrid scaffold implanted tibial site compared to the pristine scaffold without any toxic effect. Introduction of the minute amount of titanium phosphate within the adorned nHA promotes the osteoconductivity significantly by the capability of forming coordinate bonds of the titanium ion. Depending on the mechanical, physicochemical, in vitro characteristics, and in vivo osteoconductivity, the PUU/nHA-TP nanohybrid scaffold has great potential as an alternative biomaterial in bone tissue regeneration application.
Collapse
Affiliation(s)
- Sanjoy Kumar Ghorai
- Rubber Technology Centre, Indian Institute of Technology, Kharagpur-721302, India
| | - Somnath Maji
- Department of Biotechnology, Indian Institute of Technology, Kharagpur-721302, India
| | | | - Tapas Kumar Maiti
- Department of Biotechnology, Indian Institute of Technology, Kharagpur-721302, India
| | | |
Collapse
|
9
|
He Y, Wan J, Yang Y, Yuan P, Yang C, Wang Z, Zhang L. Multifunctional Polypyrrole-Coated Mesoporous TiO 2 Nanocomposites for Photothermal, Sonodynamic, and Chemotherapeutic Treatments and Dual-Modal Ultrasound/Photoacoustic Imaging of Tumors. Adv Healthc Mater 2019; 8:e1801254. [PMID: 30844136 DOI: 10.1002/adhm.201801254] [Citation(s) in RCA: 54] [Impact Index Per Article: 10.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/07/2018] [Revised: 02/02/2019] [Indexed: 12/21/2022]
Abstract
TiO2 nanoparticles have emerged as satisfactory sonosensitizers in sonodynamic therapy over the years, but shortcomings such as poor drug loading capability and inadequate techniques to construct suitable TiO2 nanoparticles, limit their broader applications. Hence, in this paper, versatile nanocomposites that combine mesoporous TiO2 nanoparticles (mTiO2 s) with the promising photothermal material, polypyrrole (PPY) to exert synergistic therapeutic effects on tumors are fabricated. The PPY-coated mesoporous TiO2 nanocomposites (mTiO2 @PPYs) act as drug delivery vehicles and ultrasonically activated sonosensitizers as well as photothermal agents. Besides, mTiO2 @PPY may have potential as an ultrasound/photoacoustic (US/PA) imaging contrast agent. The mTiO2 @PPY shows a favorable drug loading and good photothermal conversion ability. Moreover, intracellular reactive oxygen species generation is verified. The in vitro cell experiments on HepG2 and 4T1 cells demonstrate that honokiol (HNK)-loaded mTiO2 @PPY has satisfactory cytotoxicity under laser and US irradiation, and the results are further validated by animal experiments. The ability of mTiO2 @PPY as a contrast agent for US and PA imaging is investigated both in vitro and in vivo. The results indicate that mTiO2 @PPY-HNK has multitherapeutic effects and bimodal imaging property, which shows great prospect as a novel nanosystem in antitumor applications.
Collapse
Affiliation(s)
- Yue He
- Chongqing Key Laboratory of Biochemistry and Molecular PharmacologyChongqing Research Center for Pharmaceutical EngineeringSchool of pharmacyChongqing Medical University Chongqing 400016 P. R. China
| | - Jingyuan Wan
- Chongqing Key Laboratory of Biochemistry and Molecular PharmacologyChongqing Research Center for Pharmaceutical EngineeringSchool of pharmacyChongqing Medical University Chongqing 400016 P. R. China
| | - Yang Yang
- Chongqing Key Laboratory of Ultrasound Molecular ImagingInstitute of Ultrasound ImagingChongqing Medical University Chongqing 400016 P. R. China
| | - Pei Yuan
- Chongqing Key Laboratory of Biochemistry and Molecular PharmacologyChongqing Research Center for Pharmaceutical EngineeringSchool of pharmacyChongqing Medical University Chongqing 400016 P. R. China
| | - Cheng Yang
- Chongqing Key Laboratory of Biochemistry and Molecular PharmacologyChongqing Research Center for Pharmaceutical EngineeringSchool of pharmacyChongqing Medical University Chongqing 400016 P. R. China
| | - Zhigang Wang
- Chongqing Key Laboratory of Ultrasound Molecular ImagingInstitute of Ultrasound ImagingChongqing Medical University Chongqing 400016 P. R. China
| | - Liangke Zhang
- Chongqing Key Laboratory of Biochemistry and Molecular PharmacologyChongqing Research Center for Pharmaceutical EngineeringSchool of pharmacyChongqing Medical University Chongqing 400016 P. R. China
| |
Collapse
|
10
|
Azizi Vahed T, Naimi-Jamal MR, Panahi L. Alginate-coated ZIF-8 metal-organic framework as a green and bioactive platform for controlled drug release. J Drug Deliv Sci Technol 2019. [DOI: 10.1016/j.jddst.2018.12.022] [Citation(s) in RCA: 38] [Impact Index Per Article: 7.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
|
11
|
López-Álvarez M, López-Puente V, Rodríguez-Valencia C, Angelomé PC, Liz-Marzán LM, Serra J, Pastoriza-Santos I, González P. Osteogenic effects of simvastatin-loaded mesoporous titania thin films. Biomed Mater 2018; 13:025017. [DOI: 10.1088/1748-605x/aa95f1] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
|
12
|
Azizi Vahed T, Naimi-Jamal MR, Panahi L. (Fe)MIL-100-Met@alginate: a hybrid polymer–MOF for enhancement of metformin's bioavailability and pH-controlled release. NEW J CHEM 2018. [DOI: 10.1039/c8nj01946k] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
Abstract
Metformin hydrochloride (Met) was combined with iron(iii) chloride and trimesic acid (1,3,5-benzene tricarboxylic acid, BTC) as an organic linker in a short and simple method, providing a MOF in which the drug is a part of the constituent.
Collapse
Affiliation(s)
- Tahereh Azizi Vahed
- Research Laboratory of Green Organic Synthesis & Polymers
- Department of Chemistry
- Iran University of Science and Technology
- Tehran
- Islamic Republic of Iran
| | - M. Reza Naimi-Jamal
- Research Laboratory of Green Organic Synthesis & Polymers
- Department of Chemistry
- Iran University of Science and Technology
- Tehran
- Islamic Republic of Iran
| | - Leila Panahi
- Research Laboratory of Green Organic Synthesis & Polymers
- Department of Chemistry
- Iran University of Science and Technology
- Tehran
- Islamic Republic of Iran
| |
Collapse
|
13
|
Duan G, Bagheri AR, Jiang S, Golenser J, Agarwal S, Greiner A. Exploration of Macroporous Polymeric Sponges As Drug Carriers. Biomacromolecules 2017; 18:3215-3221. [PMID: 28820944 DOI: 10.1021/acs.biomac.7b00852] [Citation(s) in RCA: 53] [Impact Index Per Article: 7.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Achieving high drug loading capacity and controlling drug delivery are two main challenges related to drug carriers. In this study, polymeric macroporous sponges with very high pore volume and large porosity are introduced as a new-type of drug carrier. Due to the high pore volume (285 and 166 cm3/g for the sponges with densities of 3.5 and 6.0 mg/cm3, respectively), the sponges exhibit very high drug loading capacities with average values of 1870 ± 114 and 2697 ± 73 mg/g in the present study, which is much higher than the meso and microporous drug carriers (<1500 mg/g). In order to control the release profiles, an additional poly(p-xylylene) (PPX) coating was deposited by chemical vapor deposition on the drug loaded sponge. Consequently, Artemisone (ART) release in the aqueous medium could be retarded, depending on the density of the sponge and the thickness of the coating. In future, the new 3D polymeric sponges would be highly beneficial as drug carriers for the programmed release of drugs for treatment of chronic diseases.
Collapse
Affiliation(s)
- Gaigai Duan
- Macromolecular Chemistry, Bavarian Polymer Institute, University of Bayreuth , Universitätsstrasse 30, 95440 Bayreuth, Germany
| | - Amir Reza Bagheri
- Macromolecular Chemistry, Bavarian Polymer Institute, University of Bayreuth , Universitätsstrasse 30, 95440 Bayreuth, Germany
| | - Shaohua Jiang
- Macromolecular Chemistry, Bavarian Polymer Institute, University of Bayreuth , Universitätsstrasse 30, 95440 Bayreuth, Germany
| | - Jacob Golenser
- Department of Microbiology and Molecular Genetics, The Kuvin Centre for the Study of Infectious and Tropical Diseases, The Hebrew University of Jerusalem , Jerusalem, Israel
| | - Seema Agarwal
- Macromolecular Chemistry, Bavarian Polymer Institute, University of Bayreuth , Universitätsstrasse 30, 95440 Bayreuth, Germany
| | - Andreas Greiner
- Macromolecular Chemistry, Bavarian Polymer Institute, University of Bayreuth , Universitätsstrasse 30, 95440 Bayreuth, Germany
| |
Collapse
|
14
|
Lyu Y, Ren H, Yu M, Li X, Li D, Mu C. Using oxidized amylose as carrier of linalool for the development of antibacterial wound dressing. Carbohydr Polym 2017; 174:1095-1105. [PMID: 28821032 DOI: 10.1016/j.carbpol.2017.07.033] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/09/2017] [Revised: 07/11/2017] [Accepted: 07/11/2017] [Indexed: 12/15/2022]
Abstract
This study aimed to prepare antibacterial wound dressings based on collagen and linalool/oxidized amylose inclusion complex. Encapsulation with oxidized amylose was used as an effective way to introduce linalool into collagen matrix. Our results showed that the content of linalool in the composite dressings was efficiently increased thanks to the solubilization effect of oxidized amyloses. The developed composite dressings possessed porous structure. They had abilities to keep the wound in moist environment and meanwhile prevent the excess exudates accumulation. The incorporation of linalool conferred the composite dressings with excellent antibacterial activities as expected. Moreover, the composite dressing with the highest content of linalool presented enhanced blood compatibility and good cell biocompatibility. This composite dressing effectively promoted granulation tissue formation and accelerated wound healing. It effectively prevented inflammation in regenerated skin tissue and scar formation too. Overall, the developed antibacterial wound dressings hold great potential for use in wound healing applications.
Collapse
Affiliation(s)
- Yongbo Lyu
- Department of Pharmaceutical and Bioengineering, School of Chemical Engineering, Sichuan University, Chengdu 610065, PR China
| | - He Ren
- Department of Pharmaceutical and Bioengineering, School of Chemical Engineering, Sichuan University, Chengdu 610065, PR China
| | - Mengchao Yu
- State Key Laboratory of Pharmaceutical Biotechnology, Collaborative Innovation Center of Chemistry for Life Sciences, Jiangsu Engineering Research Center for MicroRNA Biology and Biotechnology, NJU Advanced Institute for Life Sciences (NAILS), School of Life Sciences, Nanjing University, Nanjing 210023, PR China
| | - Xinying Li
- College of Chemistry and Environment Protection Engineering, Southwest University for Nationalities, Chengdu 610041, PR China
| | - Defu Li
- Department of Pharmaceutical and Bioengineering, School of Chemical Engineering, Sichuan University, Chengdu 610065, PR China.
| | - Changdao Mu
- Department of Pharmaceutical and Bioengineering, School of Chemical Engineering, Sichuan University, Chengdu 610065, PR China.
| |
Collapse
|
15
|
Study the role of poly(diethyl aminoethyl methacrylate) as a modified and grafted shell for TiO2 and ZnO nanoparticles, application in flutamide delivery. REACT FUNCT POLYM 2017. [DOI: 10.1016/j.reactfunctpolym.2017.04.016] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/23/2023]
|
16
|
Yang Z, Lu L, Kiely CJ, Berger BW, McIntosh S. Single Enzyme Direct Biomineralization of CdSe and CdSe-CdS Core-Shell Quantum Dots. ACS APPLIED MATERIALS & INTERFACES 2017; 9:13430-13439. [PMID: 28358193 DOI: 10.1021/acsami.7b00133] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
Biomineralization is the process by which biological systems synthesize inorganic materials. Herein, we demonstrate an engineered cystathionine γ-lyase enzyme, smCSE that is active for the direct aqueous phase biomineralization of CdSe and CdSe-CdS core-shell nanocrystals. The nanocrystals are formed in an otherwise unreactive buffered solution of Cd acetate and selenocystine through enzymatic turnover of the selenocystine to form a reactive precursor, likely H2Se. The particle size of the CdSe core nanocrystals can be tuned by varying the incubation time to generated particle sizes between 2.74 ± 0.63 nm and 4.78 ± 1.16 nm formed after 20 min and 24 h of incubation, respectively. Subsequent purification and introduction of l-cysteine as a sulfur source facilitates the biomineralization of a CdS shell onto the CdSe cores. The quantum yield of the resulting CdSe-CdS core-shell particles is up to 12% in the aqueous phase; comparable to that reported for more traditional chemical synthesis routes for core-shell particles of similar size with similar shell coverage. This single-enzyme route to functional nanocrystals synthesis reveals the powerful potential of biomineralization processes.
Collapse
Affiliation(s)
- Zhou Yang
- Department of Chemical and Biomolecular Engineering, Lehigh University , Bethlehem, Pennsylvania 18015, United States
| | - Li Lu
- Department of Materials Science and Engineering, Lehigh University , Bethlehem, Pennsylvania 18015, United States
| | - Christopher J Kiely
- Department of Chemical and Biomolecular Engineering, Lehigh University , Bethlehem, Pennsylvania 18015, United States
- Department of Materials Science and Engineering, Lehigh University , Bethlehem, Pennsylvania 18015, United States
| | - Bryan W Berger
- Department of Chemical and Biomolecular Engineering, Lehigh University , Bethlehem, Pennsylvania 18015, United States
- Program in Bioengineering, Lehigh University , Bethlehem, Pennsylvania 18015, United States
| | - Steven McIntosh
- Department of Chemical and Biomolecular Engineering, Lehigh University , Bethlehem, Pennsylvania 18015, United States
| |
Collapse
|
17
|
Electrochemical deposition of mineralized BSA/collagen coating. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2016; 66:66-76. [DOI: 10.1016/j.msec.2016.04.088] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/21/2015] [Revised: 01/29/2016] [Accepted: 04/24/2016] [Indexed: 01/18/2023]
|
18
|
Wang X, Li W. Biodegradable mesoporous bioactive glass nanospheres for drug delivery and bone tissue regeneration. NANOTECHNOLOGY 2016; 27:225102. [PMID: 27102805 DOI: 10.1088/0957-4484/27/22/225102] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Bioactive inorganic materials are attractive for hard tissue regeneration, and they are used as delivery vehicles for pharmaceutical molecules, scaffolds and components for bio-composites. We demonstrated mesoporous bioactive glass (BG) nanospheres that exhibited the capacity to deliver pharmaceutical molecules. Mesoporous BG nanospheres with variable Ca to Si ratios were synthesized using sol-gel chemistry. By controlling the hydrolysis and condensation conditions, the diameter of the mesoporous BG nanospheres was changed from 300 nm to 1500 nm. The porous structure and surface area of the BG nanospheres were shown to be dependent on their composition. The surface area of the BG nanospheres decreased from 400 ± 2 m(2) g(-1) to 56 ± 0.1 m(2) g(-1) when the Ca/Si ratio increased from 5 to 50 at.%. When the mesoporous BG nanospheres were loaded with ibuprofen (IBU), they exhibited a sustained release profile in simulated body fluid (SBF). In the meantime, the IBU-loaded BG nanospheres degraded in SBF, and induced apatite layer formation on the surface as a result of their good bioactivity. When the BG nanospheres were used as a composite filler to poly (ε-caprolactone) (PCL), they were shown to be effective at improving the in vitro bioactivity of PCL microspheres.
Collapse
Affiliation(s)
- Xiaojian Wang
- Department of Materials Science and Engineering, Jinan University, Guangzhou 510632, People's Republic of China
| | | |
Collapse
|
19
|
Nanocomposite scaffold with enhanced stability by hydrogen bonds between collagen, polyvinyl pyrrolidone and titanium dioxide. Colloids Surf B Biointerfaces 2015; 140:287-296. [PMID: 26764111 DOI: 10.1016/j.colsurfb.2015.12.005] [Citation(s) in RCA: 28] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/14/2015] [Revised: 11/30/2015] [Accepted: 12/01/2015] [Indexed: 11/24/2022]
Abstract
In this study, three-dimensional (3D) nanocomposite scaffolds, as potential substrates for skin tissue engineering, were fabricated by freeze drying the mixture of type I collagen extracted from porcine skin and polyvinyl pyrrolidone (PVP)-coated titanium dioxide (TiO2) nanoparticles. This procedure was performed without any cross-linker or toxic reagents to generate porosity in the scaffold. Both morphology and thermal stability of the nanocomposite scaffold were examined. The swelling behavior, mechanical properties and hydrolytic degradation of the composite scaffolds were carefully investigated. Our results revealed that collagen, PVP and TiO2 are bonded together by four main hydrogen bonds, which is an essential action for the formation of nanocomposite scaffold. Using Coasts-Redfern model, we were able to calculate the thermal degradation apparent activation energy and demonstrated that the thermal stability of nanocomposites is dependent on amount of PVP incorporated. Furthermore, SEM images showed that the collagen fibers are wrapped and stabilized on scaffolds by PVP molecules, which improve the ultimate tensile strength (UTS). The UTS of PVP-contained scaffold is four times higher than that of scaffold without PVP, whereas ultimate percentage of elongation (UPE) is decreased, and PVP can enhance the degradation resistance.
Collapse
|
20
|
Sowmiya M, Senthilkumar K. Adsorption of proline, hydroxyproline and glycine on anatase (001) surface: a first-principle study. Theor Chem Acc 2015. [DOI: 10.1007/s00214-015-1783-7] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
21
|
Ma H, Shen J, Yang Q, Zhou J, Xia S, Cao J. Effect of the Introduction of Fish Collagen on the Thermal and Mechanical Properties of Poly(lactic acid). Ind Eng Chem Res 2015. [DOI: 10.1021/acs.iecr.5b02969] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
Affiliation(s)
- Hui Ma
- College of Material and Textile
Engineering, Jiaxing University, Jiaxing, Zhejiang 314001, People’s Republic of China
| | - Jiajia Shen
- College of Material and Textile
Engineering, Jiaxing University, Jiaxing, Zhejiang 314001, People’s Republic of China
| | - Qun Yang
- College of Material and Textile
Engineering, Jiaxing University, Jiaxing, Zhejiang 314001, People’s Republic of China
| | - Jie Zhou
- College of Material and Textile
Engineering, Jiaxing University, Jiaxing, Zhejiang 314001, People’s Republic of China
| | - Shuangshuang Xia
- College of Material and Textile
Engineering, Jiaxing University, Jiaxing, Zhejiang 314001, People’s Republic of China
| | - Jianda Cao
- College of Material and Textile
Engineering, Jiaxing University, Jiaxing, Zhejiang 314001, People’s Republic of China
| |
Collapse
|
22
|
Karlsson J, Atefyekta S, Andersson M. Controlling drug delivery kinetics from mesoporous titania thin films by pore size and surface energy. Int J Nanomedicine 2015; 10:4425-36. [PMID: 26185444 PMCID: PMC4501225 DOI: 10.2147/ijn.s83005] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022] Open
Abstract
The osseointegration capacity of bone-anchoring implants can be improved by the use of drugs that are administrated by an inbuilt drug delivery system. However, to attain superior control of drug delivery and to have the ability to administer drugs of varying size, including proteins, further material development of drug carriers is needed. Mesoporous materials have shown great potential in drug delivery applications to provide and maintain a drug concentration within the therapeutic window for the desired period of time. Moreover, drug delivery from coatings consisting of mesoporous titania has shown to be promising to improve healing of bone-anchoring implants. Here we report on how the delivery of an osteoporosis drug, alendronate, can be controlled by altering pore size and surface energy of mesoporous titania thin films. The pore size was varied from 3.4 nm to 7.2 nm by the use of different structure-directing templates and addition of a swelling agent. The surface energy was also altered by grafting dimethylsilane to the pore walls. The drug uptake and release profiles were monitored in situ using quartz crystal microbalance with dissipation (QCM-D) and it was shown that both pore size and surface energy had a profound effect on both the adsorption and release kinetics of alendronate. The QCM-D data provided evidence that the drug delivery from mesoporous titania films is controlled by a binding-diffusion mechanism. The yielded knowledge of release kinetics is crucial in order to improve the in vivo tissue response associated to therapeutic treatments.
Collapse
Affiliation(s)
- Johan Karlsson
- Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg, Sweden
| | - Saba Atefyekta
- Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg, Sweden
| | - Martin Andersson
- Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg, Sweden
| |
Collapse
|
23
|
Shi J, Zhang W, Zhang S, Wang X, Jiang Z. Synthesis of organic–inorganic hybrid microcapsules through in situ generation of an inorganic layer on an adhesive layer with mineralization-inducing capability. J Mater Chem B 2015; 3:465-474. [DOI: 10.1039/c4tb01802h] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A facile and efficient route is developed to prepare (PDA–PEI)/titania hybrid microcapsules by in situ generation of an inorganic layer on an adhesive layer with mineralization-inducing capability under mild conditions.
Collapse
Affiliation(s)
- Jiafu Shi
- School of Environmental Science and Engineering
- Tianjin University
- Tianjin 300072
- China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin)
| | - Wenyan Zhang
- Key Laboratory for Green Chemical Technology of Ministry of Education
- School of Chemical Engineering and Technology
- Tianjin University
- Tianjin 300072
- China
| | - Shaohua Zhang
- Key Laboratory for Green Chemical Technology of Ministry of Education
- School of Chemical Engineering and Technology
- Tianjin University
- Tianjin 300072
- China
| | - Xiaoli Wang
- Key Laboratory for Green Chemical Technology of Ministry of Education
- School of Chemical Engineering and Technology
- Tianjin University
- Tianjin 300072
- China
| | - Zhongyi Jiang
- Key Laboratory for Green Chemical Technology of Ministry of Education
- School of Chemical Engineering and Technology
- Tianjin University
- Tianjin 300072
- China
| |
Collapse
|
24
|
Khan MK, Hamad WY, Maclachlan MJ. Tunable mesoporous bilayer photonic resins with chiral nematic structures and actuator properties. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2014; 26:2323-8. [PMID: 24446312 DOI: 10.1002/adma.201304966] [Citation(s) in RCA: 37] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/06/2013] [Revised: 11/11/2013] [Indexed: 05/24/2023]
Abstract
Chiral nematic structures with different helical pitch from layer to layer are embedded into phenol-formaldehyde bilayer resin composite films using cellulose nanocrystals (CNCs) as templates. Selective removal of CNCs results in mesoporous resins with different pore size and helical pitch between the layers. Consequently, these materials exhibit photonic properties by selectively reflecting lights of two different wavelengths and concomitant actuation properties.
Collapse
Affiliation(s)
- Mostofa K Khan
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC, V6T 1Z1, Canada
| | | | | |
Collapse
|
25
|
Chen W, Zhang JZ, Hu J, Guo Q, Yang D. Preparation of amphiphilic copolymers for covalent loading of paclitaxel for drug delivery system. ACTA ACUST UNITED AC 2013. [DOI: 10.1002/pola.27009] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Affiliation(s)
- Wulian Chen
- State Key Laboratory of Molecular Engineering of Polymers; Department of Macromolecular Science; Fudan University; Shanghai 200433 China
| | - Jin Z. Zhang
- Department of Chemistry and Biochemistry; University of California; Santa Cruz California 95064
| | - Jianhua Hu
- State Key Laboratory of Molecular Engineering of Polymers; Department of Macromolecular Science; Fudan University; Shanghai 200433 China
- Key Laboratory of Smart Drug Delivery, Ministry of Education and PLA, Fudan University; Shanghai 201203 China
| | - Qisang Guo
- Mdical Center for Diagnostics & Treat of Cervical Disease, Obstetrics and Gynecology Hospital, Fudan University; Shanghai 200011 China
| | - Dong Yang
- State Key Laboratory of Molecular Engineering of Polymers; Department of Macromolecular Science; Fudan University; Shanghai 200433 China
| |
Collapse
|
26
|
Wang X, Chen D, Cao L, Li Y, Boyd BJ, Caruso RA. Mesoporous titanium zirconium oxide nanospheres with potential for drug delivery applications. ACS APPLIED MATERIALS & INTERFACES 2013; 5:10926-10932. [PMID: 24150740 DOI: 10.1021/am4031104] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
Mesoporous titanium zirconium (TiZr) oxide nanospheres with variable Ti to Zr ratios were synthesized using sol-gel chemistry followed by solvothermal treatment. These oxide nanospheres exhibited similar diameters (~360 nm), high surface areas (from 237 ± 2 to 419 ± 4 m(2) g(-1)), and uniform pore diameters (~3.7 nm). Three drugs, ibuprofen, dexamethasone, and erythromycin, were loaded into the TiZr oxide nanospheres. The TiZr oxide nanospheres exhibited a high loading capacity, up to 719 mg g(-1), and sustained release profiles in phosphate buffered saline (PBS) at pH 7.4. The mesoporous TiZr oxide nanospheres also exhibited hydrolytic stability, as evidenced by the retention of the integrity of the mesostructures after drug release in PBS for 21 days.
Collapse
Affiliation(s)
- Xiaojian Wang
- CSIRO Materials Science and Engineering , Private Bag 33, Clayton South, Victoria 3169, Australia
| | | | | | | | | | | |
Collapse
|