Purine-stabilized green fluorescent gold nanoclusters for cell nuclei imaging applications

Utilizing Copper Nanoclusters as a Fluorescent Probe for Quantitative Monitoring of Doxorubicin Anticancer Drug

Monitoring the amount of chemotherapeutic drugs in biological fluids is extremely important for dose adjustment or control of side effects during the treatment process. In this study, copper nanoclusters (Cu NCs) were synthesized via a one-pot method using ammonium citrate as the reducing agent. Cu NCs exhibited bright blue fluorescence, good optical properties and outstanding photostability. The produced Cu NCs were characterized in detail by UV‒vis absorption, fluorescence spectroscopy and transmission electron microscopy (TEM). The produced Cu NCs showed a high quantum yield of 0.97. A fluorescence system was used for doxorubicin (DOX) determination using Cu NCs as a nanoprobe. The presence of DOX decreased the fluorescence intensity of the CuNCs at 445 nm but increased the fluorescence intensity of the CuNCs at 619 nm. As a result, quantitative detection of DOX can be achieved by measuring the ratio of fluorescence intensities at 445 and 619 nm (F619/F445). The fluorescence quenching activity of the Cu NCs was determined to have a linear relationship with the amount of DOX anticancer drug in the range of 1-15 ppb, and the usability of the Cu NCs as a sensor for detection in biological fluids was demonstrated. It was determined that this method can be used to measure the amount of DOX in biological samples effectively.

Perspectives of different colour-emissive nanomaterials in fluorescent ink, LEDs, cell imaging, and sensing of various analytes

In the past 2 decades, multicolour light-emissive nanomaterials have gained significant interest in chemical and biological sciences because of their unique optical properties. These materials have drawn much attention due to their unique characteristics towards various application fields. The development of novel nanomaterials has become the pinpoint for different application areas. In this review, the recent progress in the area of multicolour-emissive nanomaterials is summarized. The different emissions (white, orange, green, red, blue, and multicolour) of nanostructure materials (metal nanoclusters, quantum dots, carbon dots, and rare earth-based nanomaterials) are briefly discussed. The potential applications of different colour-emissive nanomaterials in the development of fluorescent inks, light-emitting diodes, cell imaging, and sensing devices are briefly summarized. Finally, the future perspectives of multicolour-emissive nanomaterials are discussed.

Photoluminescent Histidine-Stabilized Gold Nanoclusters as Efficient Sensors for Fast and Easy Visual Detection of Fe Ions in Water Using Paper-Based Portable Platform

Herein is presented a novel and efficient portable paper-based sensing platform using paper-incorporated histidine stabilized gold nanoclusters (His-AuNCs), for the sensitive and selective detection of Fe ions from low-volume real water samples based on photoluminescence (PL) quenching. Highly photoluminescent colloidal His-AuNCs are obtained via a novel microwave-assisted method. The His-AuNCs-based sensor reveals a limit of detection (LOD) as low as 0.2 μM and a good selectivity towards Fe ions, in solution. Further, the fabricated portable sensing device based on paper impregnated with His-AuNCs proves to be suitable for the easy detection of hazardous Fe levels from real water samples, under UV light exposure, through evaluating the level of PL quenching on paper. Photographic images are thereafter captured with a smartphone camera and the average blue intensity ratio (I/I₀) of the His-AuNCs-paper spots is plotted against [Fe²⁺] revealing a LOD of 3.2 μM. Moreover, selectivity and competitivity assays performed on paper-based sensor prove that the proposed platform presents high selectivity and accuracy for the detection of Fe ions from water samples. To validate the platform, sensing assays are performed on real water samples from local sources, spiked with 35 μM Fe ions (i.e., Fe²⁺). The obtained recoveries prove the high sensitivity and accuracy of the proposed His-AuNCs-paper-based sensor pointing towards its applicability as an easy-to-use, fast, quantitative and qualitative sensor suitable for on-site detection of toxic levels of Fe ions in low-volume real water samples.

Monodisperse Gold Nanoparticles: A Review on Synthesis and Their Application in Modern Medicine

Gold nanoparticles (AuNPs) are becoming increasingly popular as drug carriers due to their unique properties such as size tenability, multivalency, low toxicity and biocompatibility. AuNPs have physical features that distinguish them from bulk materials, small molecules and other nanoscale particles. Their unique combination of characteristics is just now being fully realized in various biomedical applications. In this review, we focus on the research accomplishments and new opportunities in this field, and we describe the rising developments in the use of monodisperse AuNPs for diagnostic and therapeutic applications. This study addresses the key principles and the most recent published data, focusing on monodisperse AuNP synthesis, surface modifications, and future theranostic applications. Moving forward, we also consider the possible development of functionalized monodisperse AuNPs for theranostic applications based on these efforts. We anticipate that as research advances, flexible AuNPs will become a crucial platform for medical applications.

Effects of protecting groups on luminescent metal nanoclusters: spectroscopic signatures and applications

Luminescent metal nanoclusters (NCs) have been established as next-generation fluorophores. Their biocompatible and non-toxic nature, along with excellent chemical- and photo-stability, enables them to find applications in multi-disciplinary areas. However, preparing NCs which are stable is always challenging, primarily owing to their small size and propensity to self-aggregate. In this review, we highlight a holistic approach as to how ligands and templates can monitor the stability of NCs, tune their spectroscopic signatures, and alter their applications. The role of small molecules of a large ligand in the preparation of NCs and their associated limitations are also discussed. We have summarized how these NCs can be utilized in sensing several metal ions, pH, viscosity and temperature of many systems which have biological relevance. Additionally, these luminescent metal NCs find usage in cell-imaging, discriminating between cancerous and non-cancerous cell lines and also targeting specific organelles within the cellular environment.

Visualization of third-level information in latent fingerprints by a new fluorogenic L-tyrosine analogue

Incorporation of fluorescent α-amino acids in peptide/protein sequences, at desired positions, is eminently useful for non-invasive detection of cellular events, without impacting their native properties. As an extension to such an approach, we describe the design of two stable, fluorescent l-tyrosine analogs, FHBY and BHBY, exhibiting photophysical properties associated with the AIE-coupled ESIPT mechanism, for fluorescent reporting of latent fingerprints. Notably, FHBY selectively adheres to the papillary ridges of latent fingerprints and reveals up to the third-level of information at one of the lowest reported concentrations of 25 μM.

Synthesis of biocompatible, BSA capped fluorescent CaCO3 pre-nucleation nanoclusters for cell imaging applications

Novel, photostable, multicolour fluorescent, highly biocompatible, water soluble, BSA capped pre-nucleation CaCO3 nanoclusters (FCPN) (∼1.3 nm) are developed using a facile biomineralization process. M. oleifera leaf extract and BSA protein are used as sources of ascorbic acid and capping agent, respectively. The developed FCPN shows fluorescence in the blue, green, and yellow/red region with an average life time of 1.05, 6.23 and 30.60 ns, respectively. The MALDI-MS measurements reveal that these nanoclusters are 16, 50, 73, 222 and 936 molecules big. These FCPN, when incubated (up to 7 days) with MG-63 cells, demonstrate an increase in cell viability percentage with time period as compared to their control samples. Furthermore, these incubated cells were investigated using confocal microscopy to estimate the FCPN diffusion penetration depth using CTCF analysis. It has been observed that blue and green emitting FCPN penetrated 6 μm, whereas red emitting FCPN traversed only 4 μm. The relative quantum yield (Rhodamine 6G = 0.92) of FCPN for green emission was found to be 0.0175 in water. The prepared nanoclusters displayed four months shelf-life. These FCPN were prepared using an environmentally benign, inexpensive, green synthetic route without using toxic reducing agents. Furthermore, the current report discusses the detailed results, obtained from X-ray photoelectron spectroscopy, MALDI-MS, Fourier transform infrared spectroscopy, UV-visible, fluorescence spectroscopy, lifetime measurements, electron microscopy, fluorescence microscopy and confocal microscopy.

Gold nanomaterials for optical biosensing and bioimaging

Gold nanoparticles (AuNPs) are highly compelling nanomaterials for biomedical studies due to their unique optical properties. By leveraging the versatile optical properties of different gold nanostructures, the performance of biosensing and biomedical imaging can be dramatically improved in terms of their sensitivity, specificity, speed, contrast, resolution and penetration depth. Here we review recent advances of optical biosensing and bioimaging techniques based on three major optical properties of AuNPs: surface plasmon resonance, surface enhanced Raman scattering and luminescence. We summarize the fabrication methods and optical properties of different types of AuNPs, highlight the emerging applications of these AuNPs for novel optical biosensors and biomedical imaging innovations, and discuss the future trends of AuNP-based optical biosensors and bioimaging as well as the challenges of implementing these techniques in preclinical and clinical investigations.

Revealing graphitic nitrogen participating in p–π conjugated domain as emissive center of red carbon dots and applied to red room-temperature phosphorescence

The fluorescence center of R-CDs is derived from the p–π conjugation effect of graphitic nitrogen, which can promote effective red RTP emission.

The nucleobase assisted pyrene functionalization of gold nanoparticles

Gold nanoparticles were functionalized with a pyrene fluorophore without compromising the functional behaviour of the fluorophore.

Proof of principle of a purine D-A-D' ligand based ratiometric chemical sensor harnessing complexation induced intermolecular PET

A comprehensive photophysical study of a series of purines, doubly decorated at C2 and C6 positions with identical fragments ranging from electron acceptor to donor groups of different strengths, is presented. The asymmetry of substitutions creates a unique molecular D-A-D' structure possessing two independent electronic charge transfer (CT) systems attributed to each fragment and exhibiting dual-band fluorescence. Moreover, the inherent property of coordination of metal ions by purines was enriched due to a presence of nearby triazoles used as spacers for donor or acceptor fragments. New molecules present a bidentate coordination mode, which makes the assembly of several ligands with one metal cation possible. This property was exploited to create a new concept of a ratiometric chemical fluorescence sensor involving the photoinduced electron transfer between branches of different ligands as a mechanism of fluorescence modulation.

Facile Synthesis of Ultrastable Fluorescent Copper Nanoclusters and Their Cellular Imaging Application

Copper nanoclusters (Cu NCs) are generally formed by several to dozens of atoms. Because of wide range of raw materials and cheap prices, Cu NCs have attracted scientists’ special attention. However, Cu NCs tend to undergo oxidation easily. Thus, there is a dire need to develop a synthetic protocol for preparing fluorescent Cu NCs with high QY and better stability. Herein, we report a one-step method for preparing stable blue-green fluorescent copper nanoclusters using glutathione (GSH) as both a reducing agent and a stabilizing agent. High-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS) and electrospray ionization mass spectrometer (ESI-MS) were used to characterize the resulting Cu NCs. The as-prepared Cu NCs@GSH possess an ultrasmall size (2.3 ± 0.4 nm), blue-green fluorescence with decent quantum yield (6.2%) and good stability. MTT results clearly suggest that the Cu NCs@GSH are biocompatible. After incubated with EB-labeled HEK293T cells, the Cu NCs mainly accumulated in nuclei of the cells, suggesting that the as-prepared Cu NCs could potentially be used as the fluorescent probe for applications in cellular imaging.

Human Nontumorigenic Microglia Synthesize Strongly Fluorescent Au/Fe Nanoclusters, Retaining Bioavailability

The ability for cells to self-synthesize metal-core nanoclusters (mcNCs) offers increased imaging and identification opportunities. To date, much work has been done illustrating the ability for human tumorigenic cell lines to synthesize mcNCs; however, this has not been illustrated for nontumorigenic cell lines. Here, we present the ability for human nontumorigenic microglial cells, which are the major immune cells in the central nervous system, to self-synthesize gold (Au) and iron (Fe) core nanoclusters, following exposures to metallic salts. We also show the ability for cells to internalize presynthesized Au and Fe mcNCs. Cellular fluorescence increased in most exposures and in a dose dependent manner in the case of Au salt. Scanning transmission electron microscopic imaging confirmed the presence of the metal within cells, while transmission electron microscopy images confirmed nanocluster structures and self-synthesis. Interestingly, self-synthesized nanoclusters were of similar size and internal structure as presynthesized mcNCs. Toxicity assessment of both salts and presynthesized NCs illustrated a lack of toxicity from Au salt and presynthesized NCs. However, Fe salt was generally more toxic and stressful to cells at similar concentrations.

Gold nanoclusters/graphene quantum dots complex-based dual-emitting ratiometric fluorescence probe for the determination of glucose

Herein, we report the design of a single-excitation/double-emission ratiometric fluorescence nanosensor for the determination of glucose. The sensing system combines glucose oxidation catalyzed by glucose oxidase, Fenton chemistry, Fe³⁺-sensitive fluorescent gold nanoclusters (AuNCs), and Fe³⁺-inert fluorescent graphene quantum dots (GQDs). We used orange-fluorescent AuNCs co-modified with bovine serum albumin and 3-mercaptopropionic acid as the indicator probe, and GQDs with the same excitation wavelength as the BSA/MPA-AuNCs, but with different emission wavelength, as the reference probe. The fluorescence intensity-ratio between 420 nm and 575 nm (F₄₂₀/F₅₇₅) was used to quantitatively determine glucose with a low detection limit of 0.18 μM, and the nanosensor was successfully used to detect glucose in human serum. This ratiometric fluorescence sensing system, based on AuNCs and GQDs, ensures sensitive and convenient determination of glucose, and has broad application prospects for biomedical-analysis applications.

Differential Interaction of Metal Ions with Gold Nanoclusters and Application in Detection of Cobalt and Cadmium

Interest in biosensing platforms using protein fluorescent gold nanoclusters (FGNCs) has grown significantly in the past due to the unique optical properties they offer. This study investigates the interaction of metal ions with FGNCs, and the structural modifications brought about by the interaction resulting in fluorescence changes of the cluster and its successful application in the detection of two heavy metals, cobalt and cadmium. The binding of cobalt and cadmium to FGNCs synthesized from BSA significantly altered the secondary structure of the protein, causing a change in its hydrophobicity. It also resulted in a change in fluorescence properties of FGNCs by intersystem crossing (ICT) and fluorescence resonance energy transfer (FRET). Cobalt and cadmium could successfully be detected in the range of 5-165 ng/mL (R² = 0.95) and 20-1000 ng/ mL (R² = 0.91), respectively, with appreciable sensitivity. The principle was also applied for the detection of Vitamin B₁₂ in commercially available ampoules, validating the proposed method. Graphical Abstract Proposed detection method of cadmium and cobalt using FGNCs.

Fluorescent gold nanocluster-based sensor for detection of alkaline phosphatase in human osteosarcoma cells

Gold nanoclusters (AuNCs) have attracted much attention as signal transducers in photoluminescence chemical/biological sensors. Herein, we employ bovine serum albumin/3-mercaptopropionic acid co-modified AuNCs as a fluorescence probe, Fe³⁺ as a quencher, and pyrophosphate as an alkaline phosphatase (ALP) substrate and Fe³⁺ chelator to design a novel biosensor for ALP detection, achieving a detection linear range of 0.8-16 U/L and a detection limit of 0.78 U/L. The developed method is successfully applied to the detection of ALP in human osteosarcoma cells and is shown to be suited for ALP inhibitor screening.

Purine-blended nanofiber woven flexible nanomats for SERS-based analyte detection

We report a fabricated nanocomposite as a flexible Surface-Enhanced Raman Scattering (SERS) substrate for uric acid detection up to 10⁻⁷ M (100 nM).

Biocompatible gold nanoclusters: synthetic strategies and biomedical prospects

The latest advances concerning ultra-small gold nanoparticles (≤2 nm) commonly known as gold nanoclusters (AuNCs) are reviewed and discussed in the context of biological and biomedical applications (labeling, delivery, imaging and therapy). A great diversity of synthetic methods has been developed and optimized aiming to improve the chemical structures and physicochemical properties of the resulting AuNCs. The main synthetic approaches were surveyed with emphasis on methods leading to water-soluble AuNCs since aqueous solutions are the preferred media for biological applications. The most representative and recent experimental results are discussed in relationship to their potential for biomedical applications.

Synthesis and fluorescent properties of N(9)-alkylated 2-amino-6-triazolylpurines and 7-deazapurines

The synthesis of novel fluorescent N(9)-alkylated 2-amino-6-triazolylpurine and 7-deazapurine derivatives is described. A new C(2)-regioselectivity in the nucleophilic aromatic substitution reactions of 9-alkylated-2,6-diazidopurines and 7-deazapurines with secondary amines has been disclosed. The obtained intermediates, 9-alkylated-2-amino-6-azido-(7-deaza)purines, were transformed into the title compounds by CuAAC reaction. The designed compounds belong to the push-pull systems and possess promising fluorescence properties with quantum yields in the range from 28% to 60% in acetonitrile solution. Due to electron-withdrawing properties of purine and 7-deazapurine heterocycles, which were additionally extended by triazole moieties, the compounds with electron-donating groups showed intramolecular charge transfer character (ICT/TICT) of the excited states which was proved by solvatochromic dynamics and supported by DFT calculations. In the 7-deazapurine series this led to increased fluorescence quantum yield (74%) in THF solution. The compounds exhibit low cytotoxicity and as such are useful for the cell labelling studies in the future.

Targeting of EGFR, VEGFR2, and Akt by Engineered Dual Drug Encapsulated Mesoporous Silica-Gold Nanoclusters Sensitizes Tamoxifen-Resistant Breast Cancer

Tamoxifen administration enhanced overall disease-free survival and diminished mortality rates in cancer patients. However, patients with breast cancer often fail to respond for tamoxifen therapy due to the development of a drug-resistant phenotype. Functional analysis and molecular studies suggest that protein mutation and dysregulation of survival signaling molecules such as epidermal growth factor receptor, vascular endothelial growth factor receptor 2, and Akt contribute to tamoxifen resistance. Various strategies, including combinatorial therapies, show chemosensitize tamoxifen-resistant cancers. Based on chemotoxicity issues, researchers are actively investigating alternative therapeutic strategies. In the current study, we fabricate a mesoporous silica gold cluster nanodrug delivery system that displays exceptional tumor-targeting capability, thus promoting accretion of drug indices at the tumor site. We employ dual drugs, ZD6474, and epigallocatechin gallate (EGCG) that inhibit EGFR2, VEGFR2, and Akt signaling pathways since changes in these signaling pathways confer tamoxifen resistance in MCF 7 and T-47D cells. Mesoporous silica gold cluster nanodrug delivery of ZD6474 and EGCG sensitize tamoxifen-resistant cells to apoptosis. Western and immune-histochemical analyses confirmed the apoptotic inducing properties of the nanoformulation. Overall, results with these silica gold nanoclusters suggest that they may be a potent nanoformulation against chemoresistant cancers.

In situ fluorescence activation of DNA-silver nanoclusters as a label-free and general strategy for cell nucleus imaging

A facile, general and turn-on nucleus imaging strategy was first developed based on in situ fluorescence activation of C-rich dark silver nanoclusters by G-rich telomeres. After a simple incubation without washing, nanoclusters could selectively stain the nucleus with intense red luminescence, which was confirmed using fixed/living cells and several cell lines.

Methionine-Capped Gold Nanoclusters as a Fluorescence-Enhanced Probe for Cadmium(II) Sensing

Gold nanoclusters (Au NCs) have been considered as novel heavy metal ions sensors due to their ultrafine size, photo-stability and excellent fluorescent properties. In this study, a green and facile method was developed for the preparation of fluorescent water-soluble gold nanoclusters with methionine as a stabilizer. The nanoclusters emit orange fluorescence with excitation/emission peaks at 420/565 nm and a quantum yield of about 1.46%. The fluorescence of the Au NCs is selectively and sensitively enhanced by addition of Cd(II) ions attributed to the Cd(II) ion-induced aggregation of nanoclusters. This finding was further used to design a fluorometric method for the determination of Cd(II) ions, which had a linear response in the concentration range from 50 nM to 35 μM and a detection limit of 12.25 nM. The practicality of the nanoprobe was validated in various environmental water samples and milk powder samples, with a fairly satisfactory recovery percent.

Developing single-entity theranostic: drug-based fluorescent nanoclusters with augmented cytotoxicity

AIM

To develop methotrexate (MTX) templated luminescent gold nanoclusters (NCs) as a single unit nanotheranostic for cancer therapy and to assess its potential as an alternative to the parent drug, for drug delivery vehicles (DDVs).

METHODS

Theranostics were synthesized and extensively characterized. The stability of the theranostic and its bioimaging aptitude were evaluated. The antiproliferative propensity of the theranostic was gauged with cell viability assays and was supplemented with cytometry-based assays. Feasibility of delivering the MTX NCs instead of parent drug on a DDV was also checked.

RESULTS

MTX NCs displayed remarkable physical characteristics and augmented cytotoxicity with a robust stability in phosphate-buffered saline and serum. MTX NCs also demonstrated their amenability to being loaded on a DDV (chitosan folic acid nanoparticles) while retaining their physical and cytotoxic profile.

CONCLUSION

Generation of next level drug-based theranostics with the potential of replacing the free drug in drug delivery platforms.

Detection of Sulfide Using Mercapto Tetrazine-Protected Fluorescent Gold Nanodots: Preparation of Paper-Based Testing Kit for On-Site Monitoring

This work demonstrates the development of a highly sensitive method to detect and quantify sulfide ions (S^2-) in water samples. First, we synthesized 6-mercapto-s-triazolo(4,3-b)-s-tetrazine (MTT) by the reaction between formaldehyde and 4-amino-3-hydrazino-5-mercapto-1,2,4-triazole at room temperature. The synthetic MTT was used as a capping ligand for the synthesis of gold nanodots (AuNDs) via a one-pot green method at room temperature with only a 10 min reaction time. Transmission electron microscopy images exhibited that the MTT-AuNDs have an average particle size of 1.9 nm and an emission maximum at 672 nm upon excitation at 360 nm. The synthesized highly red emissive MTT-AuNDs are used as specific fluorescent probes for the detection of S^2-. The fluorescence of MTT-AuNDs was significantly and dose-dependently quenched by the addition of S^2-. The observed fluorescence quenching was ascribed to the formation of an Au₂S complex, which was determined by Raman and mass spectroscopy. A good linearity was achieved for the increasing concentration of S^2- from 870 nM to 16 μM, and the detection limit was found to be 2 nM (S/N = 3). The S^2- detection system that is described in this study was validated and agreed well with the standard methylene blue method. Furthermore, the present sensor was examined for its use in quantifying S^2- in real water samples obtained from lakes and rivers. In addition, the specificity was checked against the most likely ion interferences in real water. Moreover, a cost-effective and viable paper-based S^2- sensor was fabricated for environmental monitoring based on the use of MTT-AuNDs. The developed system would be an environmentally friendly and easy-to-use detection device for S^2- in water.

Real-time imaging of cancer cell generations and monitoring tumor growth using a nucleus-targeted red fluorescent probe

A red nucleus-targeted fluorescent probe was reported and used for tracing cancer cell generations and monitoring tumor growth.

pH-Regulated Synthesis of Trypsin-Templated Copper Nanoclusters with Blue and Yellow Fluorescent Emission

In this article, a simple protocol to prepare water-soluble fluorescent copper nanoclusters (CuNCs) using trypsin as a stabilizer and hydrazine hydrate as a reducing agent was reported. It was found that the pH of the reaction solution was critical in determining the fluorescence of CuNCs. CuNCs with blue and yellow fluorescent emission were obtained under basic and acidic conditions, respectively. Although the detailed formation mechanisms of these CuNCs required further analysis, the synthetic route was promising for preparing different fluorescent metal NCs for applications. With good water solubility and excellent photostability, the yellow-emitting CuNCs could serve as a fluorescence probe for detection of Hg²⁺ based on the aggregation-induced quenching mechanism. The fluorescence quenching efficiency had fantastic linearity to Hg²⁺ concentrations in the range of 0.1-100 μM, with a limit of detection of 30 nM. Additionally, the yellow-emitting CuNCs exhibited negligible cytotoxicity and were successfully applied to bioimaging of HeLa cells.

Tuning Cross-Coupling Approaches to C3 Modification of 3-Deazapurines

A general approach to C3 modification of purine scaffold through various types of cross-coupling reactions has been established. Tuning substrate electronics and reaction conditions resulted in the development of highly efficient sp²-sp, sp²-sp², and sp²-sp³ cross-coupling conditions for modification of 3-deazaadenine to access C3-modified adenine and hypoxanthine scaffolds. The optimized methodologies to access the corresponding 3-deazaadenosine phosphoramidites for solid-phase DNA synthesis have been demonstrated.

Label-free fluorescence turn-on aptasensor for prostate-specific antigen sensing based on aggregation-induced emission-silica nanospheres

Fluorescent light-up probes based on aggregation-induced emission (AIE)-active molecules have recently attracted great research interest due to the intelligent fluorescence activation mechanism and high sensitivity. In this work, an AIE-silica nanosphere (SiO₂ NP)-based label-free fluorescent aptasensor for the sensitive "turn-on" detection of prostate-specific antigen (PSA) is reported for the first time. The positively charged amino-functionalized SiO₂ NPs were used as efficient nanocapturer to electrostatically adsorb single-stranded PSA aptamer (PA) to form SiO₂ NP-PA nanocomposite as well as adsorb negatively charged tetraphenylethylene derivative 3 (TPE3) to form AIE-SiO₂ NP nanocomposite. The binding of the aptamer to the target PSA could induce a rigid aptamer conformation, resulting in the release of the PA away from the surface of SiO₂ NPs. This made the AIE molecules TPE3 aggregate on the SiO₂ NP surface and emit high fluorescence. With the advantages of simple design and rapid responses, the proposed aptasensor showed high sensitivity and selectivity for PSA with a detection limit of 0.5 ng/mL. The aptasensor was further applied in human serum samples with satisfactory results. Given its versatility, high selectivity, and sensitivity, the proposed method could be extended to other targets by varying the recognition probes. Graphical abstract An AIE-SiO₂ NP-based label-free fluorescent aptasensor for the sensitive "turn-on" detection of PSA is reported for the first time.

Directed adenine functionalization for creating complex architectures for material and biological applications

In this feature article, targeted design strategies are outlined for modified adenine nucleobase derivatives in order to construct metal-mediated discrete complexes, ring-expanded purine skeletons, linear and catenated coordination polymers, shape-selective MOFs, and purine-capped nanoparticles, with a wide range of applications from gas and solvent adsorption to bioimaging agents and anticancer metallodrugs. The success of such design strategies could be ascribed to the rich chemistry of purine and pyrimidine derivatives, versatile coordination behavior, ability to bind a host of metal ions, which could be further tuned by the introduction of additional functionalities, and their inherent propensity to hydrogen bond and exhibit π-π interactions. These noncovalent interactions produce stable frameworks and network solids that are useful as advanced materials, and the biocompatibility of these ligand complexes provides an impetus for assessing novel biological applications.

N9 substituent mediated structural tuning of copper–purine complexes: chelate effect and thin film studies

Six Cu(ii) complexes of strategically designed derivatives of 6-chloropurine, one of which has been explored as a thin film precursor on quartz and Si(111) surfaces by using chemical vapor deposition (CVD).

Fluorescent metal quantum clusters: an updated overview of the synthesis, properties, and biological applications

A brief history of metal quantum clusters, their synthesis methods, physical properties, and an updated overview of their applications is provided.

Stretchable and Thermally Stable Dual Emission Composite Films of On-Purpose Aggregated Copper Nanoclusters in Carboxylated Polyurethane for Remote White Light-Emitting Devices

Stretchable, mechanically stable films with thermally stable dual emission peaked in the blue and orange spectral range are fabricated by condensation and aging of carboxylated polyurethane in the presence of on-purpose aggregated copper nanoclusters. The aggregation of copper clusters leads to the enhancement of their emission in the orange, while polyurethane matrix contributes with the blue emission band, with an overall photoluminescence quantum yield of the films as high as 18%. Composite Cu nanoclusters/polyurethane films are sufficiently transparent over the visible spectral range and are absorbing in the UV range; more than 90% of their emission intensity is preserved after 10 times of cycle of stretch and recovery, as well as aging of up to 10 h at 90 °C, making them useful for optoelectronic devices. Remote white light-emitting devices (LEDs) have been fabricated by placing a down-conversion layer of composite Cu nanoclusters/polyurethane film separated through a silicone resin spacer from the UV LED chip, with Commission Internationale de l'Eclairage color coordinates of (0.34, 0.29), and a high color rendering index of 87.

Ultrasensitive electrochemical DNA biosensor based on functionalized gold clusters/graphene nanohybrids coupling with exonuclease III-aided cascade target recycling

In this work, a novel and ultrasensitive electrochemical biosensor was constructed for DNA detection based on functionalized gold clusters/graphene nanohybrids (AuNCs/GR nanobybrids) and exonuclease III (Exo III)-aided cascade target recycling. By utilizing the capacity of GR as universal template, different metal nanoclusters including AuNCs/GR nanobybrids and PtNCs/GR nanohybrids were synthesized through convenient ultrasonic method. Exo III-aided cascade recycling was initiated by target DNA, generating the final cleavage product (S2), which acted as a linkage between capture probe and the functionalized metal nanoclusters/GR conjugates in the construction of the biosensor. The AuNCs/GR-DNA-enzyme conjugates acted as interfaces of enzyme-catalyzed silver deposition reaction, achieving DNA detection ranging from 0.02 fM to 20 pM with a detection limit of 0.057 fM. In addition, PtNCs/GR-DNA conjugates presented peroxidase-like activity and the functionalized PtNCs/GR nanohybrids-based electrochemical biosensor also realized DNA detection by catalyzing the 3,3',5,5'-tetramethylbenzidine-hydrogen peroxide (TMB-H₂O₂) system to produce electrochemical signal. This metal clusters/GR-based multiple-amplified electrochemical biosensor provided an universal method for DNA detection.