Evaluation of dysprosia aerogels as drug delivery systems: a comparative study with random and ordered mesoporous silicas

Mesoporous Materials as Elements of Modern Drug Delivery Systems for Anti-Inflammatory Agents: A Review of Recent Achievements

Interest in the use of mesoporous materials as carriers of medicinal substances has been steadily increasing in the last two decades. Mesoporous carriers have application in the preparation of delivery systems for drugs from various therapeutic groups; however, their use as the carriers of anti-inflammatory agents is particularly marked. This review article, with about 170 references, summarizes the achievements in the application of mesoporous materials as the carriers of anti-inflammatory agents in recent years. This article will discuss a variety of mesoporous carriers as well as the characteristics of their porous structure that determine further use of these materials in the field of medical applications. Special attention will be paid to the progress observed in the construction of stimuli-responsive drug carriers and systems providing site-specific drug delivery. Subsequently, a review of the literature devoted to the use of mesoporous matrices as the carriers of anti-inflammatory drugs was carried out.

Aerogels in drug delivery: From design to application

Aerogels are the lightest processed solid materials on Earth and with the largest empty volume fraction in their structure. Composition versatility, modularity, and feasibility of industrial scale manufacturing are behind the fast emergence of aerogels in the drug delivery field. Compared to other 3D materials, the high porosity (interconnected mesopores) and high specific surface area of aerogels may allow faster loading of small-molecule drugs, less constrained access to inner regions of the matrix, and more efficient interactions of the biological milieu with the polymer matrix. Processing in supercritical CO₂ medium for both aerogel production (drying) and drug loading (impregnation) has remarkable advantages such as absence of an oxidizing environment, clean manufacture, and easiness for the scale-up under good manufacturing practices. The aerogel solid skeleton dictates the chemical affinity to the different drugs, which in turn determines the loading efficiency and the release pattern. Aerogels can be used to increase the solubility of BCS Class II and IV drugs because the drug can be deposited in amorphous state onto the large surface area of the skeleton, which facilitates a rapid contact with the body fluids, dissolution, and release. Conversely, tuning the aerogel structure by functionalization with drug-binding moieties or stimuli-responsive components, application of coatings and incorporation of drug-loaded aerogels into other matrices may enable site-specific, stimuli-responsive, or prolonged drug release. The present review deals with last decade advances in aerogels for drug delivery. An special focus is paid first on the loading efficiency of active ingredients and release kinetics under biorelevant conditions. Subsequent sections deal with aerogels intended to address specific therapeutic demands. In addition to oral delivery, the physical properties of the aerogels appear to be very advantageous for mucosal administration routes, such as pulmonary, nasal, or transdermal. A specific section devoted to recent achievements in gene therapy and theranostics is also included. In the last section, scale up strategies and life cycle assessment are comprehensively addressed.

Curcumin-loaded metal oxide aerogels: supercritical drying and stability

Curcumin, known as a potential antioxidant and anti-inflammatory agent, has major limitations for its therapeutic use because of its lack of water solubility and relatively low bioavailability. We report for the first time the loading of different metal oxide aerogels with curcumin. The aerogels were prepared via the sol–gel process and dried under supercritical conditions. Mixing curcumin with the metal precursors prior to the formation of the solid network ensures maximum entrapment. The curcumin–network interactions stabilize the organic moiety and create hybrid aerogels as potential vehicles for curcumin in various media. The aerogels were characterized by FTIR spectroscopy, thermogravimetric analysis, electron microscopy, and fluorescence spectroscopy to confirm their hybrid nature. The stability study by fluorescence spectroscopy revealed three distinct behaviors depending on the nature of the metal oxide: (i) a minor interaction between curcumin and the solid network slightly affecting the microenvironment; (ii) a quenching phenomenon when iron is present explained by a coordination between the iron ions and curcumin; and (iii) a strong complexation of the metal ions with curcumin after gelation.

Metal oxide aerogels are investigated as encapsulation media for curcumin, a polyphenol having potential uses in medicine, probing, and sensing.

Poly(Urethane-Acrylate) Aerogels via Radical Polymerization of Dendritic Urethane-Acrylate Monomers

The purpose of this work was to investigate the effect of multifunctionality on material properties of synthetic polymer aerogels. For this purpose, we present the synthesis and characterization of monolithic dendritic-type urethane-acrylate monomers based on an aliphatic/flexible (Desmodur N3300), or an aromatic/rigid (Desmodur RE) triisocyanate core. The terminal acrylate groups (three at the tip of each of the three branches, nine in total) were polymerized with 2,2'-azobis(isobutyronitrile) (AIBN) via free radical chemistry. The resulting wet-gels were dried with supercritical fluid (SCF) CO₂. Aerogels were characterized with ATR-FTIR and solid-state 13C NMR. The porous network was probed with N₂-sorption and scanning electron microscopy (SEM). The thermal stability of aerogels was studied with thermogravimetric analysis (TGA). Most aerogels were macroporous materials (porosity > 80%), with high thermal stability (up to 300 °C). Aerogels were softer at low monomer concentrations and more rigid at higher concentrations. The material properties were compared with those of analogous aerogels bearing only one acrylate moiety at the tip of each branch and the same cores, and with those of analogous aerogels bearing norbornene instead of acrylate moieties. The nine-terminal acrylate-based monomers of this study caused rapid decrease of the solubility of the growing polymer and made possible aerogels with much smaller particles and much higher surface areas. For the first time, aliphatic/flexible triisocyanate-based materials could be made with similar properties in terms of particle size and surface areas to their aromatic/rigid analogues. Finally, it was found that with monomers with a high number of crosslinkable groups, material properties are determined by multifunctionality and thus aerogels based on 9-acrylate- and 9-norbornene-terminated monomers were similar. Materials with aromatic cores are carbonizable with satisfactory yields (20⁻30% w/w) to mostly microporous materials (BET surface areas: 640⁻740 m² g-1; micropore surface areas: 360⁻430 m² g-1).

A facile template route to periodic mesoporous organosilicas nanospheres with tubular structure by using compressed CO2

Periodic mesoporous organosilicas (PMOs) nanospheres with tubular structure were prepared with compressed CO₂ using cationic and anionic mixed surfactant (CTAB/SDS) and triblock copolymer Pluronic P123 as bi-templates. TEM, N₂ adsorption-desorption, solid NMR, and FTIR were employed to characterize the obtained materials. Compressed CO₂ severed as acidic reagent to promote the hydrolysis of organosilicas, and could tune the morphology and structure of the obtained PMOs nanomaterials simple by adjusting the CO₂ pressure during the synthesis process. Rhodamine B (RB) and Ibuprofen (IBU), as the model dye and drug, were loaded into the prepared nanomaterials to reveal its adsorption and desorption ability. Furthermore, different molars of the surfactant (CTAB/SDS) and organosilane precursor (BTEB) were investigated to show the effect of the surfactant concentration on the morphology and structure of the PMOs prepared with compressed CO₂, and some different structures were obtained. A possible mechanism for the synthesis of PMOs with tubular structure using compressed CO₂ was proposed based on the experimental results.

Biocompatible and target specific hydrophobically modified glycol chitosan nanoparticles

Cardiovascular disease is the leading cause of death in the United States. Atherosclerosis is a major cause for cardiovascular diseases. Drugs that treat atherosclerosis usually act nonspecifically. To enhance drug delivery specificity, the authors developed a hydrophobically modified glycol chitosan (HGC) nanoparticle that can specifically target activated endothelial cells. The biocompatibility of these nanoparticles toward red blood cells and platelets was evaluated through hemolysis, platelet activation, platelet thrombogenicity, and platelet aggregation assays. The biocompatibility of these nanoparticles toward vascular endothelial cells was evaluated by their effects on endothelial cell growth, metabolic activity, and activation. The results demonstrated that HGC nanoparticles did not cause hemolysis, or affect platelet activation, thrombogenicity, and aggregation capability in vitro. The nanoparticles did not impair vascular endothelial cell growth or metabolic activities in vitro, and did not cause cell activation either. When conjugated with intercellular adhesion molecular 1 antibodies, HGC nanoparticles showed a significantly increased targeting specificity toward activated endothelial cells. These results suggested that HGC nanoparticles are likely compatible toward red blood cells, platelets, and endothelial cells, and they can be potentially used to identify activated endothelial cells at atherosclerotic lesion areas within the vasculature, and deliver therapeutic drugs.

Synthesis and biomedical applications of aerogels: Possibilities and challenges

Aerogels are an exceptional group of nanoporous materials with outstanding physicochemical properties. Due to their unique physical, chemical, and mechanical properties, aerogels are recognized as promising candidates for diverse applications including, thermal insulation, catalysis, environmental cleaning up, chemical sensors, acoustic transducers, energy storage devices, metal casting molds and water repellant coatings. Here, we have provided a comprehensive overview on the synthesis, processing and drying methods of the mostly investigated types of aerogels used in the biological and biomedical contexts, including silica aerogels, silica-polymer composites, polymeric and biopolymer aerogels. In addition, the very recent challenges on these aerogels with regard to their applicability in biomedical field as well as for personalized medicine applications are considered and explained in detail.

Aqueous-Based Fabrication of Low-VOC Nanostructured Block Copolymer Films as Potential Marine Antifouling Coatings

The ability to fabricate nanostructured films by exploiting the phenomenon of microphase separation has made block copolymers an invaluable tool for a wide array of coating applications. Standard approaches to engineering nanodomains commonly involve the application of organic solvents, either through dissolution or annealing protocols, resulting in the release of volatile organic compounds (VOCs). In this paper, an aqueous-based method of fabricating low-VOC nanostructured block copolymer films is presented. The reported procedure allows for the phase transfer of water insoluble triblock copolymer, poly(styrene-block-2 vinylpyridine-block-ethylene oxide) (PS-b-P2VP-b-PEO), from a water immiscible phase to an aqueous environment with the assistance of a diblock copolymeric phase transfer agent, poly(styrene-block-ethylene oxide) (PS-b-PEO). Phase transfer into the aqueous phase results in self-assembly of PS-b-P2VP-b-PEO into core-shell-corona micelles, which are characterized by dynamic light scattering techniques. The films that result from coating the micellar solution onto Si/SiO2 surfaces exhibit nanoscale features that disrupt the ability of a model foulant, a zoospore of Ulva linza, to settle. The multilayered architecture consists of a pH-responsive P2VP-"shell" which can be stimulated to control the size of these features. The ability of these nanostructured thin films to resist protein adsorption and serve as potential marine antifouling coatings is supported through atomic force microscopy (AFM) and analysis of the settlement of Ulva linza zoospore. Field trials of the surfaces in a natural environment show the inhibition of macrofoulants for 1 month.

Mesochanneled hierarchically porous aluminosiloxane aerogel microspheres as a stable support for pH-responsive controlled drug release

The molecular-scale self-assembly of a 3D aluminosiloxane (Al-O-Si) hybrid gel network was successfully performed via the cocondensation of hydrolyzed alumina (AlOOH) and (3-aminopropyl)trimethoxysilane (APS). It was transformed into a microspherical aerogel framework of Al-O-Si containing mesochannels with tunable hierarchically bimodal meso/macroporosities by a subcritical drying technique. Good homogeneity of AlOOH and APS brought during the synthesis guaranteed a uniform distribution of two metal oxides in a single body. A systematic characterization of the aerogel support was carried out using FTIR, SEM, TEM, nitrogen adsorption/desorption analysis, WAXS, SAXS, and ξ-potential measurement in order to explore the material for drug uptake and release. The drug loading and release capacity and chemical stability of an aluminosiloxane aerogel were studied using two nonsteroidal antiinflammatory drugs, ibuprofen and aspirin. A comprehensive evaluation of the aluminosiloxane aerogel with ordered mesoporous MCM-41 was also performed. Aerogel supports showed a high drug loading capacity and a pH-responsive controlled-release property compared to MCM-41. Meanwhile, kinetic modeling studies indicate that the drug releases with a zero-order profile following the Korsmeyer-Peppas model. The biocompatibility of aluminosiloxane aerogels was established via ex vivo and in vivo studies. We also outline the use of aluminosiloxane aerogel as a support for a possible 3D matrix for an osteoconductive structure for bone tissue engineering.

Fabrication of single-hole glutathione-responsive degradable hollow silica nanoparticles for drug delivery

In the present study, a kind of single-hole glutathione (GSH)-responsive degradable hollow silica nanoparticles (G-DHSNs) was synthesized and used as carriers of doxorubicin (DOX) (DOX-G-DHSNs). The G-DHSNs were accurately designed and fabricated with a simple and convenient method, and without any extra pernicious component. The composition, morphology and properties of the G-DHSNs had been characterized by (1)HNMR spectra, Fourier transform infrared spectrograph, thermo gravimetric analysis, transmission electron microscope, and scanning electron microscope. The degradation study of G-DHSNs showed that the G-DHSNs would be broken into pieces after interacting with GSH. Besides, the negligible hemolytic activity and low cytotoxicity of the G-DHSNs demonstrated its excellent biocompatibility. pH- and GSH-triggered release of DOX followed by the decomposition of G-DHSNs within TCA8113 cancer cells was further confirmed by flow cytometry and confocal laser scanning microscopy studies. All of these results indicated that G-DHSNs can be used as safe and promising drug nanocarriers.