Formation of highly structured cubic micellar lipid nanoparticles of soy phosphatidylcholine and glycerol dioleate and their degradation by triacylglycerol lipase

Non-lamellar lyotropic liquid crystalline nanoparticles as nanocarriers for enhanced drug encapsulation of atorvastatin calcium and proanthocyanidins

Atorvastatin calcium (ATV) and proanthocyanidins (PAC) have a strong antioxidant activity, that can benefit to reduce the atherosclerotic plaque progression. Unfortunately, the bioavailability of ATV is greatly reduced due to its limited drug solubility while the PAC drug is unstable upon exposure to the atmospheric oxygen. Herein, the lyotropic liquid crystalline nanoparticles (LLCNPs) constructed by a binary mixture of soy phosphatidylcholine (SPC) and citric acid ester of monoglyceride (citrem) at different weight ratios were used to encapsulate the hydrophobic ATV and hydrophilic PAC. The LLCNPs were further characterized by small-angle X-ray scattering and dynamic light scattering. Depending on the lipid composition, the systems have a size range of 140-190 nm and were able to encapsulate both drugs in the range of 90-100%. Upon increasing the citrem content of drug-loaded LLCNPs, the hexosomes (H2) was completely transformed to an emulsified inverse micellar (L2). The optimum encapsulation efficiency (EE) of ATV and PAC were obtained in citrem/SPC weight ratio 4:1 (L2) and 1:1 (H2), respectively. There was a substantial change in the mean size and PDI of the nanoparticles upon 30 days of storage with the ATV-loaded LLCNPs exhibiting greater colloidal instability than PAC-loaded LLCNPs. The biphasic released pattern (burst released at the initial stage followed by the sustained released at the later stage) was perceived in ATV formulation, while the burst drug released pattern was observed in PAC formulations that could be attributed by its internal H2 structure. Interestingly, the cytokine studies showed that the PAC-LLCNPs promisingly up regulate the expressions of tumor necrosis factor-alpha (TNF-α) better than the drug-free and ATV-loaded LLCNPs samples. The structural tunability of citrem/SPC nanoparticles and their effect on physicochemical characteristic, biological activities and potential as an alternative drug delivery platform in the treatment of atherosclerosis are discussed.

Development and approval of novel injectables: enhancing therapeutic innovations

INTRODUCTION

Novel injectables possess applications in both local and systemic therapeutics delivery. The advancement in utilized materials for the construction of complex injectables has tremendously upgraded their safety and efficacy.

AREAS COVERED

This review focuses on various strategies to produce novel injectables, including oily dispersions, in situ forming implants, injectable suspensions, microspheres, liposomes, and antibody-drug conjugates. We herein present a detailed description of complex injectable technologies and their related drug formulations permitted for clinical use by the United States Food and Drug Administration (USFDA). The excipients used, their purpose and the challenges faced during manufacturing such formulations have been critically discussed.

EXPERT OPINION

Novel injectables can deliver therapeutic agents in a controlled way at the desired site. However, several challenges persist with respect to their genericization. Astronomical costs incurred by innovator companies during product development, complexity of the product itself, supply limitations with respect to raw materials, intricate manufacturing processes, patent evergreening, product life-cycle extensions, relatively few and protracted generic approvals contribute to the exorbitant prices and access crunch. Moreover, regulatory guidance are grossly underdeveloped and significant efforts have to be directed toward development of effective characterization techniques.

Sustain-release lipid-liquid crystal formulations of pexiganan against Helicobacter pylori infection: in vitro evaluation in C57BL/6 mice

INTRODUCTION

The Gram-negative bacterium Helicobacter pylori, H. pylori, is associated with significant digestive disorders. However, the effectiveness of bacterial eradication is declining due to drug resistance. A potent anti-H. pylori activity is shown by the natural antimicrobial peptide pexiganan.

OBJECTIVE

The current study aimed to evaluate the effectiveness of pexiganan and its lipid-liquid crystals (LLCs) in inducing Helicobacter pylori in mice.

METHODS

In this experimental study, H. pylori infection was first induced in C57BL/6 mice. Secondly, the antibacterial efficacy of pexiganan and its LLCs formulations was investigated to eliminate H. pylori infection.

RESULTS

The H. pylori infection could not be completely eradicated by pexiganan peptide alone. However, incorporating pexiganan within the LLC formulation resulted in an increased elimination of H. pylori. Under the H&E strain, the pexiganan-LLCs formulation revealed minimal mucosal alterations and a lower amount of inflammatory cell infiltration in the stomach compared to the placebo.

CONCLUSION

Clarithromycin was more effective than pexiganan at all tested concentrations. Furthermore, the pexiganan-loaded LLCs exhibited superior efficacy in curing H. pylori infection in a mouse model compared to pexiganan alone. This formulation can enhance H. pylori clearance while mitigating the adverse effects, typically associated with conventional drugs, leading to a viable alternative to current treatment options.

Development of Sustained Release Formulations Based on Lipid-Liquid Crystal to Control the Release of Deoxycholate: In Vitro and In Vivo Assessment

Subcutaneous injections of phosphatidylcholine (PC), sodium deoxycholate (NADC), and a mixture of them were found to be an effective option for treating cellulite. However, it is noteworthy that the injection of NADC may result in inflammation as well as necrosis in the injection area. The preparation of a sustained release formulation based on lipid-liquid crystal that controls the release of NADC could be a potential solution to address the issue of inflammation and necrosis at the site of injection. To present a practical and validated approach for accurately determining the concentration of NADC in LLC formulations, spectrofluorimetry was used based on the International Council for Harmonization (ICH) Q2 guidelines. Based on the validation results, the fluorometric technique has been confirmed as a reliable, efficient, and economical analytical method for quantifying NADC concentrations. The method demonstrated favorable attributes of linearity, precision, and accuracy, with an r2 value of 0.999. Furthermore, it exhibited excellent interday and intraday repeatability, with RSD values below 4%. The recovery percentages ranged from 97 to 100%, indicating the method's ability to accurately measure NADC concentrations. The subcutaneous injection of the LLC-NADC demonstrated a reduction in inflammation and tissue necrosis in skin tissue, along with an increase in fat lysis within 30 days, when compared to the administration of only NADC solution. Moreover, the histopathological assessment confirmed that the use of the LLC formulation did not result in any detrimental side effects for kidney or heart tissue.

An injectable MB/BG@LG sustained release lipid gel with antibacterial and osteogenic properties for efficient treatment of chronic periodontitis in rats

Periodontitis is a chronic inflammatory disease characterized by the colonization of pathogenic microorganisms and the loss of periodontal supporting tissue. However, the existing local drug delivery system for periodontitis has some problems including subpar antibacterial impact, easy loss, and unsatisfactory periodontal regeneration. In this study, a multi-functional and sustained release drug delivery system (MB/BG@LG) was developed by encapsulating methylene blue (MB) and bioactive glass (BG) into the lipid gel (LG) precursor by Macrosol technology. The properties of MB/BG@LG were characterized using a scanning electron microscope, a dynamic shear rotation rheometer, and a release curve. The results showed that MB/BG@LG could not only sustained release for 16 days, but also quickly fill the irregular bone defect caused by periodontitis through in situ hydration. Under 660 ​nm light irradiation, methylene blue-produced reactive oxygen species (ROS) can reduce local inflammatory response by inhibiting bacterial growth. In addition, in vitro and vivo experiments have shown that MB/BG@LG can effectively promote periodontal tissue regeneration by reducing inflammatory response, promoting cell proliferation and osteogenic differentiation. In summary, MB/BG@LG exhibited excellent adhesion properties, self-assembly properties, and superior drug release control capabilities, which improved the clinical feasibility of its application in complex oral environments.

Lyotropic liquid crystals for parenteral drug delivery

The necessity for long-term treatments of chronic diseases has encouraged the development of novel long-acting parenteral formulations intending to improve drug pharmacokinetics and therapeutic efficacy. Lately, one of the novel approaches has been developed based on lipid-based liquid crystals. The lyotropic liquid crystal (LLC) systems consist of amphiphilic molecules and are formed in presence of solvents with the most common types being cubic, hexagonal and lamellar mesophases. LC injectables have been recently developed based on polar lipids that spontaneously form liquid crystal nanoparticles in aqueous tissue environments to create the in-situ long-acting sustained-release depot to provide treatment efficacy over extended periods. In this manuscript, we have consolidated and summarized the various type of liquid crystals, recent formulation advancements, analytical evaluation, and therapeutic application of lyotropic liquid crystals in the field of parenteral sustained release drug delivery.

Recent advances in versatile inverse lyotropic liquid crystals

Owing to the rapid and significant progress in advanced materials and life sciences, nanotechnology is increasingly gaining in popularity. Among numerous bio-mimicking carriers, inverse lyotropic liquid crystals are known for their unique properties. These carriers make accommodation of molecules with varied characteristics achievable due to their complicated topologies. Besides, versatile symmetries of inverse LCNPs (lyotropic crystalline nanoparticles) and their aggregating bulk phases allow them to be applied in a wide range of fields including drug delivery, food, cosmetics, material sciences etc. In this review, in-depth summary, discussion and outlook for inverse lyotropic liquid crystals are provided.

Controlling the pH dependent transition between monoolein Fd3m micellar cubosomes and hexosomes using fatty acetate and fatty acid additive mixtures

HYPOTHESIS

Cubosomes made from the inverse micellar cubic mesophase (I₂) with Fd3m symmetry possess a unique structure of closely packed inverse micelles. These have prospective functionality in sustained drug release. In this study, we hypothesised that similar to fatty acids, various fatty acetate compounds can induce the formation of micellar Fd3m cubosomes in monoolein (MO) nanoparticles. They are different to micellar cubosomes made of MO and a fatty acid, which are pH responsive and can transition from an Fd3m phase to an inverse hexagonal phase (H₂) as pH increases. We hypothesised that by co-doping a fatty acetate and fatty acid into MO, precise control of the Fd3m-H₂ phase transition pH in nanoparticles can be achieved.

EXPERIMENTS

Five unsaturated fatty acetates with hydrocarbon chain lengths between 18 and 24 were added to MO at a weight ratio of 0.45 - 0.60 to form nanoparticles. The nanoparticles were prepared using high-throughput formulation and characterised with synchrotron small angle X-ray scattering (SAXS). MO nanoparticles doped with vaccenyl acetate and vaccenic acid were used to demonstrate the fine control over Fd3m-H₂ phase transition pH.

FINDINGS

Micellar cubosomes (Fd3m phase) were found in MO nanoparticles doped with fatty acetates. The Fd3m structure was stable in a wide pH range of 2.6 - 8 and at temperatures up to 45 °C. In MO nanoparticles doped with the acetate/acid mixture, the Fd3m-H₂ phase transition pH was tuned between pH 5 and pH 7 by adjusting the ratio of vaccenyl acetate and vaccenic acid. As a H₂ phase generally offers faster drug release than an Fd3m phase, the pH responsive lipid nanoparticles developed here may find application in orally administrated formulation, where the vehicles must pass a low pH environment in the stomach before reaching neutral pH in the blood.

The influence of lipid digestion on the fate of orally administered drug delivery vehicles

This review will focus on orally administered lipid-based drug delivery vehicles and specifically the influence of lipid digestion on the structure of the carrier lipids and their entrained drug cargoes. Digestion of the formulation lipids, which are typically apolar triglycerides, generates amphiphilic monoglycerides and fatty acids that can self-assemble into a diverse array of liquid crystalline structures. Tracking the dynamic changes in self-assembly of the lipid digestion products during digestion has recently been made possible using synchrotron-based small angle X-ray scattering. The influence of lipid chain length and degree of unsaturation on the resulting lipid structuring will be described in the context of the critical packing parameter theory. The chemical and structural transformation of the formulation lipids can also have a dramatic impact on the physical state of drugs co-administered with the formulation. It is often assumed that the best strategy for drug development is to maximise drug solubility in the undigested formulation lipids and to incorporate additives to maintain drug solubility during digestion. However, it is possible to improve drug absorption using lipid digestion in cases where the solubility of the dosed drug or one of its polymorphic forms is greater in the digested lipids. Three different fates for drugs administered with digestible lipid-based formulations will be discussed: (1) where the drug is more soluble in the undigested formulation lipids; (2) where the drug undergoes a polymorphic transformation during lipid digestion; and (3) where the drug is more soluble in the digested formulation lipids.

Cell medium-dependent dynamic modulation of size and structural transformations of binary phospholipid/ω-3 fatty acid liquid crystalline nano-self-assemblies: Implications in interpretation of cell uptake studies

Lyotropic non-lamellar liquid crystalline (LLC) nanoparticles, with their tunable structural features and capability of loading a wide range of drugs and reporter probes, are emerging as versatile injectable nanopharmaceuticals. Secondary emulsifiers, such as Pluronic block copolymers, are commonly used for colloidal stabilization of LLC nanoparticles, but their inclusion often compromises the biological safety (e.g., poor hemocompatibility and enhanced cytotoxicity) of the formulation. Here, we introduce a library of colloidally stable, structurally tunable, and pH-responsive lamellar and non-lamellar liquid crystalline nanoparticles from binary mixtures of a phospholipid (phosphatidylglycerol) and three types of omega-3 fatty acids (ω-3 PUFAs), prepared in the absence of a secondary emulsifier and organic solvents. We study formulation size distribution, morphological heterogeneity, and the arrangement of their internal self-assembled architectures by nanoparticle tracking analysis, synchrotron small-angle X-ray scattering, and cryo-transmission electron microscopy. The results show the influence of type and concentration of ω-3 PUFAs in nanoparticle structural transitions spanning from a lamellar (L_α) phase to inverse discontinuous (micellar) cubic Fd3m and hexagonal phase (H₂) phases, respectively. We further report on cell-culture medium-dependent dynamic fluctuations in nanoparticle size, number and morphology, and simultaneously monitor uptake kinetics in two human cell lines. We discuss the role of these multiparametric biophysical transformations on nanoparticle-cell interaction kinetics and internalization mechanisms. Collectively, our findings contribute to the understanding of fundamental steps that are imperative for improved engineering of LLC nanoparticles with necessary attributes for pharmaceutical development.

Transcriptome Variations in Verticillium dahliae in Response to Two Different Inorganic Nitrogen Sources

The fungus Verticillium dahliae causes vascular wilt disease on hundreds of plant species. The main focus of the research to control this fungus has been aimed at infection processes such as penetration peg formation and effector secretion, but the ability of the fungus to acquire and utilize nutrients are often overlooked and may hold additional potential to formulate new disease control approaches. Little is known about the molecular mechanisms of nitrogen acquisition and assimilation processes in V. dahliae. In this present study, RNA sequencing and gene expression analysis were used to examine differentially expressed genes in response to the different nitrogen sources, nitrate and ammonium, in V. dahliae. A total of 3244 and 2528 differentially expressed genes were identified in response to nitrate and ammonium treatments, respectively. The data indicated nitrate metabolism requires additional energy input while ammonium metabolism is accompanied by reductions in particular cellular processes. Gene ontology and Kyoto Encyclopedia of Genes and Genomes pathway analyses of DEGs during nitrate metabolism revealed that many of the genes encoded those involved in protein biosynthetic and metabolic processes, especially ribosome and RNA polymerase biosynthesis, but also other processes including transport and organonitrogen compound metabolism. Analysis of DEGs in the ammonium treatment indicated that cell cycle, oxidoreductase, and certain metabolic activities were reduced. In addition, DEGs participating in the utilization of both nitrate and ammonium were related to L-serine biosynthesis, energy-dependent multidrug efflux pump activity, and glycerol transport. We further showed that the mutants of three differentially expressed transcription factors (VdMcm1, VdHapX, and VDAG_08640) exhibited abnormal phenotypes under nitrate and ammonium treatment compared with the wild type strain. Deletion of VdMcm1 displayed slower growth when utilizing both nitrogen sources, while deletion of VdHapX and VDAG_08640 only affected nitrate metabolism, inferring that nitrogen assimilation required regulation of bZIP transcription factor family and participation of cell cycle. Taken together, our findings illustrate the convergent and distinctive regulatory mechanisms between preferred (ammonium) and alternative nitrogen (nitrate) metabolism at the transcriptome level, leading to better understanding of inorganic nitrogen metabolism in V. dahliae.

Paclitaxel loading in cationic liposome vectors is enhanced by replacement of oleoyl with linoleoyl tails with distinct lipid shapes

Lipid carriers of hydrophobic paclitaxel (PTX) are used in clinical trials for cancer chemotherapy. Improving their loading capacity requires enhanced PTX solubilization. We compared the time-dependence of PTX membrane solubility as a function of PTX content in cationic liposomes (CLs) with lipid tails containing one (oleoyl; DOPC/DOTAP) or two (linoleoyl; DLinPC/newly synthesized DLinTAP) cis double bonds by using microscopy to generate kinetic phase diagrams. The DLin lipids displayed significantly increased PTX membrane solubility over DO lipids. Remarkably, 8 mol% PTX in DLinTAP/DLinPC CLs remained soluble for approximately as long as 3 mol% PTX (the solubility limit, which has been the focus of most previous studies and clinical trials) in DOTAP/DOPC CLs. The increase in solubility is likely caused by enhanced molecular affinity between lipid tails and PTX, rather than by the transition in membrane structure from bilayers to inverse cylindrical micelles observed with small-angle X-ray scattering. Importantly, the efficacy of PTX-loaded CLs against prostate cancer cells (their IC50 of PTX cytotoxicity) was unaffected by changing the lipid tails, and toxicity of the CL carrier was negligible. Moreover, efficacy was approximately doubled against melanoma cells for PTX-loaded DLinTAP/DLinPC over DOTAP/DOPC CLs. Our findings demonstrate the potential of chemical modifications of the lipid tails to increase the PTX membrane loading while maintaining (and in some cases even increasing) the efficacy of CLs. The increased PTX solubility will aid the development of liposomal PTX carriers that require significantly less lipid to deliver a given amount of PTX, reducing side effects and costs.

Investigating the Potential of Phosphatidylcholine-Based Nano-Sized Carriers in Boosting the Oto-Topical Delivery of Caroverine: in vitro Characterization, Stability Assessment and ex vivo Transport Studies

Purpose

Drug delivery into the inner ear across the intact tympanic membrane (TM) has been a challenge in the treatment of inner ear disorders. In this study, nano-sized carriers were formulated for improving the non- invasive oto-topical delivery of caroverine for the treatment of tinnitus.

Methods

Caroverine was loaded into two types of phospholipid-containing systems, namely, nano elastic vesicles (EVs) and phosphatidylcholine-based liquid crystalline nano-particles (PC-LCNPs). The prepared formulations were characterized for their drug loading, particle size, polydispersity index, zeta potential, morphological features by transmission electron microscopy (TEM), and physicochemical stability. In addition, comparative ex vivo transport study was carried out using rabbits’ TM for both types of formulations.

Results

The findings show a significant superiority of PC-LCNPs over the EVs formulations in the drug payload (1% and 0.25%, respectively), physical stability and the efficiency of permeation across rabbits’ TM. The results showed a more than twofold increase in the cumulative drug flux values of PC-LCNPs (699.58 ± 100 µg/cm²) compared to the EVs (250 ± 45 µg/cm²) across the TM.

Conclusion

The current study revealed the smart physicochemical properties of PC-LCNPs demonstrating the potential of this carrier as a new attractive candidate for improving the non-invasive oto-topical delivery of caroverine.

Potential application of novel liquid crystal nanoparticles of isostearyl glyceryl ether for transdermal delivery of 4-biphenyl acetic acid

Novel liquid crystal nanoparticles (LCNs) composed of isostearyl glyceryl ether (GE-IS) and ethoxylated hydrogenated castor oil (HCO-60) were developed for the enhanced transdermal delivery of 4-biphenyl acetic acid (BAA). The physical properties and pharmaceutical properties of the LCNs were measured. The interaction between the intercellular lipid model of the stratum corneum and the LCNs was observed to elucidate the skin permeation mechanism. In the formulation, the LCNs form niosomes with mean particles sizes of 180-300 nm. The skin absorption mechanisms of LCNs are different, depending upon the application and buffer concentration. The LCNs composed of GE-IS and HCO-60 are attractive tools for use as transdermal drug delivery systems carriers for medicines and cosmetics, due to their high efficiency and safety.

Non-Lamellar Liquid Crystalline Nanocarriers for Thymoquinone Encapsulation

Owing to their unique structural features, non-lamellar liquid crystalline nanoparticles comprising cubosomes and hexosomes are attracting increasing attention as versatile investigative drug carriers. Background: Depending on their physiochemical characteristics, drug molecules on entrapment can modulate and reorganize structural features of cubosomes and hexosomes. Therefore, it is important to assess the effect of guest molecules on broader biophysical characteristics of non-lamellar liquid crystalline nanoparticles, since drug-induced architectural, morphological, and size modifications can affect the biological performance of cubosomes and hexosomes. Methods: We report on alterations in morphological, structural, and size characteristics of nanodispersions composed from binary mixtures of glycerol monooleate and vitamin E on thymoquinone (a molecule with wide therapeutic potentials) loading. Results: Thymoquinone loading was associated with a slight increase in the mean hydrodynamic nanoparticle size and led to structural transitions from an internal biphasic feature of coexisting inverse cubic Fd3m and hexagonal (H₂) phases to an internal inverse cubic Fd3m phase (micellar cubosomes) or an internal inverse micellar (L₂) phase (emulsified microemulsions, EMEs). We further report on the presence of “flower-like” vesicular populations in both native and drug-loaded nanodispersions. Conclusions: These nanodispersions have the potential to accommodate thymoquinone and may be considered as promising platforms for the development of thymoquinone nanomedicines.

Engineering Swollen Cubosomes Using Cholesterol and Anionic Lipids

Dispersions of nonlamellar lipid membrane assemblies are gaining increasing interest for drug delivery and protein therapeutic application. A key bottleneck has been the lack of rational design rules for these systems linking different lipid species and conditions to defined lattice parameters and structures. We have developed robust methods to form cubosomes (nanoparticles with porous internal structures) with water channel diameters of up to 171 Å, which are over 4 times larger than archetypal cubosome structures. The water channel diameter can be tuned via the incorporation of cholesterol and the charged lipid DOPA, DOPG, or DOPS. We have found that large molecules can be incorporated into the porous cubosome structure and that these molecules can interact with the internal cubosome membrane. This offers huge potential for accessible encapsulation and protection of biomolecules and development of confined interfacial reaction environments.

Comparison of bulk and microfluidic methods to monitor the phase behaviour of nanoparticles during digestion of lipid-based drug formulations using in situ X-ray scattering

The performance of orally administered lipid-based drug formulations is crucially dependent on digestion, and understanding the colloidal structures formed during digestion is necessary for rational formulation design. Previous studies using the established bulk pH-stat approach (Hong et al. 2015), coupled to synchrotron small angle X-ray scattering (SAXS), have begun to shed light on this subject. Such studies of digestion using in situ SAXS measurements are complex and have limitations regarding the resolution of intermediate structures. Using a microfluidic device, the digestion of lipid systems may be monitored with far better control over the mixing of the components and the application of enzyme, thereby elucidating a finer understanding of the structural progression of these lipid systems. This work compares a simple T-junction microcapillary device and a custom-built microfluidic chip featuring hydrodynamic flow focusing, with an equivalent experiment with the full scale pH-stat approach. Both microfluidic devices were found to be suitable for in situ SAXS measurements in tracking the kinetics with improved time and signal sensitivity compared to other microfluidic devices studying similar lipid-based systems, and producing more consistent and controllable structural transformations. Particle sizing of the nanoparticles produced in the microfluidic devices were more consistent than the pH-stat approach.

Mild photothermal therapy potentiates anti-PD-L1 treatment for immunologically cold tumors via an all-in-one and all-in-control strategy

One of the main challenges for immune checkpoint blockade antibodies lies in malignancies with limited T-cell responses or immunologically “cold” tumors. Inspired by the capability of fever-like heat in inducing an immune-favorable tumor microenvironment, mild photothermal therapy (PTT) is proposed to sensitize tumors to immune checkpoint inhibition and turn “cold” tumors “hot.” Here we present a combined all-in-one and all-in-control strategy to realize a local symbiotic mild photothermal-assisted immunotherapy (SMPAI). We load both a near-infrared (NIR) photothermal agent IR820 and a programmed death-ligand 1 antibody (aPD-L1) into a lipid gel depot with a favorable property of thermally reversible gel-to-sol phase transition. Manually controlled NIR irradiation regulates the release of aPD-L1 and, more importantly, increases the recruitment of tumor-infiltrating lymphocytes and boosts T-cell activity against tumors. In vivo antitumor studies on 4T1 and B16F10 models demonstrate that SMPAI is an effective and promising strategy for treating “cold” tumors.

Cubosomes: The Next Generation of Smart Lipid Nanoparticles?

Cubosomes are highly stable nanoparticles formed from the lipid cubic phase and stabilized by a polymer based outer corona. Bicontinuous lipid cubic phases consist of a single lipid bilayer that forms a continuous periodic membrane lattice structure with pores formed by two interwoven water channels. Cubosome composition can be tuned to engineer pore sizes or include bioactive lipids, the polymer outer corona can be used for targeting and they are highly stable under physiological conditions. Compared to liposomes, the structure provides a significantly higher membrane surface area for loading of membrane proteins and small drug molecules. Owing to recent advances, they can be engineered in vitro in both bulk and nanoparticle formats with applications including drug delivery, membrane bioreactors, artificial cells, and biosensors. This review outlines recent advances in cubosome technology enabling their application and provides guidelines for the rational design of new systems for biomedical applications.

On the advancement of polymeric bicontinuous nanospheres toward biomedical applications

Self-assembled soft nanocarriers that are capable of simultaneous encapsulation of both lipophilic and water soluble payloads have significantly enhanced controlled delivery applications in biomedicine. These nanoarchitectures, such as liposomes, polymersomes and cubosomes, are primarily composed of either amphiphilic polymers or lipids, with the polymeric variants generally possessing greater stability and control over biodistribution and bioresponsive release. Polymersomes have long demonstrated such advantages over their lipid analogs, liposomes, but only recently have bicontinuous nanospheres emerged as a polymeric cubic phase alternative to lipid cubosomes. In this review, we summarize the current state of the field for bicontinuous nanosphere formulation and characterization and suggest future directions for this nascent delivery platform as it is adopted for biomedical applications.

Linking (Pyr)1apelin-13 pharmacokinetics to efficacy: Stabilization and measurement of a high clearance peptide in rodents

Apelin, the endogenous ligand for the APJ receptor, has generated interest due to its beneficial effects on the cardiovascular system. Synthesized as a 77 amino acid preproprotein, apelin is post-translationally cleaved to a series of shorter peptides. Though (Pyr)¹apelin-13 represents the major circulating form in plasma, it is highly susceptible to proteolytic degradation and has an extremely short half-life, making it challenging to quantify. Literature reports of apelin levels in rodents have historically been determined with commercial ELISA kits which suffer from a lack of selectivity, recognizing a range of active and inactive isoforms of apelin peptide. (Pyr)¹apelin-13 has demonstrated beneficial hemodynamic effects in humans, and we wished to evaluate if similar effects could be measured in pre-clinical models. Despite development of a highly selective LC/MS/MS method, in rodent studies where (Pyr)¹apelin-13 was administered exogenously the peptide was not detectable until a detailed stabilization protocol was implemented during blood collection. Further, the inherent high clearance of (Pyr)¹apelin-13 required an extended release delivery system to enable chronic dosing. The ability to deliver sustained doses and stabilize (Pyr)¹apelin-13 in plasma allowed us to demonstrate for the first time the link between systemic concentration of apelin and its pharmacological effects in animal models.

Liquid Crystalline Nanostructures as PEGylated Reservoirs of Omega-3 Polyunsaturated Fatty Acids: Structural Insights toward Delivery Formulations against Neurodegenerative Disorders

Omega-3 polyunsaturated fatty acids (ω-3 PUFAs) are bioactive lipids with considerable impact in medicine and nutrition. These compounds exert structuring effects on the cellular membrane organization, regulate the gene expression, and modulate various signaling cascades and metabolic processes. The purpose of the present work is to demonstrate the structural features of ω-3 PUFA-containing three-dimensional supramolecular lipid assemblies suitable for pharmaceutical applications that require soft porous carriers. We investigate the liquid crystalline structures formed upon mixing of eicosapentaenoic acid (EPA, 20:5) with the lyotropic nonlamellar lipid monoolein and the formation of multicompartment assemblies. Starting with the monoolein-based lipid cubic phase, double membrane vesicles, cubosome precursors, sponge-type particles (spongosomes), mixed intermediate nonlamellar structures, and multicompartment assemblies are obtained through self-assembly at different amphiphilic compositions. The dispersions containing spongosomes as well as nanocarriers with oil and vesicular compartments are stabilized by PEGylation of the lipid/water interfaces using a phospholipid with a poly(ethylene glycol) chain. The microstructures of the bulk mixtures were examined by cross-polarized light optical microscopy. The dispersed liquid crystalline structures and intermediate states were studied by small-angle X-ray scattering, cryogenic transmission electron microscopy, and quasielastic light scattering techniques. They established that PUFA influences the phase type and the sizes of the aqueous compartments of the liquid crystalline carriers. The resulting multicompartment systems and stealth nanosponges may serve as mesoporous reservoirs for coencapsulation of ω-3 PUFA (e.g., EPA) with water-insoluble drugs and hydrophilic macromolecules toward development of combination treatment strategies of neurodegenerative and other diseases.

Insulin- and quercetin-loaded liquid crystalline nanoparticles: implications on oral bioavailability, antidiabetic and antioxidant efficacy

Aim: The present study reports insulin (INS)- and quercetin (QT)-lyotropic liquid crystalline nanoparticles (LCNPs) with improved bioavailability, antidiabetic and antioxidant efficacy following oral administration. Materials & methods: The developed INS-QT-LCNPs were evaluated for simulated gastric fluid stability. In vitro Caco-2 uptake studies were also performed. Furthermore, in vivo pharmacokinetics and pharmacodynamics of INS-QT-LCNPs were evaluated. Results & conclusion: INS entrapped within LCNPs demonstrated excellent stability in simulated gastric fluid. Higher uptake of fluorescein isothiocyanate-INS-LCNPs were observed in Caco-2 cells. INS-LCNPs demonstrated approximately 20% relative bioavailability compared with subcutaneously administered INS. Significant decrease in oxidative stress was confirmed by reduction in malondialdehyde level. Overall, combination strategy not only overcomes poor oral bioavailability of INS and QT, but also prevents the generation of reactive oxygen species, responsible for diabetes-mediated complications.

The lipolytic degradation of highly structured cubic micellar nanoparticles of soy phosphatidylcholine and glycerol dioleate by phospholipase A2 and triacylglycerol lipase

The effects of different lipolytic enzymes on the structure of lipid liquid crystalline nano-particles (LCNP) have been investigated by cryogenic transmission electron microscopy (cryo-TEM) and synchrotron small angle X-ray diffraction (SAXD). Here we used highly structured cubic micellar (Fd3m) nanoparticles of 50/50 (wt%/wt%) soy phosphatidyl choline (SPC)/glycerol dioleate (GDO) as substrate. Two types of lipolytic enzymes were used, phospholipase A2 (PLA2) that catalyses degradation of the phospholipid component, SPC, and porcine pancreatic triacylglycerol lipase (TGL) that facilitate the hydrolysis of the diglyceride, GDO. Evolution of the structure was found to be very different and linked to specificity of the two types of enzymes. PLA2, which hydrolyses the lamellar forming component, SPC, induces a reversed micellar lipid phase, while TGL which hydrolysis the reverse phase forming compound, GDO, induces a lamellar phase.

Injectable in situ forming gel based on lyotropic liquid crystal for persistent postoperative analgesia

Local anesthetics have been widely used for postoperative analgesia. However, multiple injections or local infiltration is required due to the short half-lives of local anesthetics after single injection, which results in poor compliance and increasing medical expense. In this study, an in situ forming gel (ISFG) based on lyotropic liquid crystal was developed to deliver bupivacaine hydrochloride (BUP) for long-acting postoperative analgesia. BUP-ISFG was designed to be administrated as a precursor solution which would spontaneously transform into gel with well-defined internal nanostructures for sustained drug release at the site of administration when exposed to physiological fluid. A lamellar-hexagonal-cubic phase transition occurred during the in situ gelation. The lamellar phase of the precursor solution endows it with low viscosity for good syringeability while the unique nanostructures of hexagonal and cubic phases of the in situ gel provide sustained drug release. Persistent analgesia effect in vivo was achieved with BUP-ISFG, and the plasma BUP concentration was found to be steadier compared to commercially available BUP for injection. In addition, the ISFG displayed acceptable biocompatibility and good biodegradability. The findings are positive about ISFG as a sustained release system for persistent postoperative analgesia.

STATEMENT OF SIGNIFICANCE

To address the issue of insufficient postoperative analgesia associated with short half-lives of local anesthetics after single injection, an in situ forming gel (ISFG) based on lyotropic liquid crystal was developed to deliver bupivacaine hydrochloride (BUP) for postoperative analgesia over three days. The results demonstrated that persistent analgesia effect in vivo was achieved with single injection of BUP-ISFG, and the plasma BUP concentration was found to be steadier compared to commercially available BUP injection. The BUP-ISFG possessed a lamellar-hexagonal-cubic phase transition with corresponding crystal change in 3D nanostructure during the in situ gelation. The relationship between crystal nanostructure and carrier function, might provide some insights to the design and clinical applications of the drug delivery systems based on lyotropic liquid crystal.

Liquid crystalline drug delivery vehicles for oral and IV/subcutaneous administration of poorly soluble (and soluble) drugs

Poorly soluble drug molecules often have low bioavailability issues and absorption problems in the clinical setting. As the number of poorly soluble drugs increases from discovery, developing technologies to enhance their solubility, while also controlling their release is one of the many challenges facing the pharmaceutical industry today. Liquid crystalline systems, nanoparticulate or macro-matrix, self-assemble in the presence of an aqueous environment and can provide a solubility enhancement, while also controlling the drug release rate. This review examines the fundamentals of liquid crystalline systems through the representative literature, concluding with examples of liquid crystalline systems in clinical trials development. The review focus is on the potential of utilizing liquid crystalline systems for poorly soluble drugs, in the areas of oral delivery and IV/subcutaneous, followed by water soluble molecules. Key considerations in utilizing liquid crystalline systems advantages while also discussing potential areas of key research that may be needed will be highlighted.

Characterization of a Liquid Crystal System for Sustained Release of a Peptide BMS-686117

Liquid crystal lipid-based formulations are an effective approach to prolong pharmacokinetics and reduce burst release of a drug on subcutaneous delivery. The objective of this paper was to investigate the influence of phase structures of a lipid-based liquid crystal delivery system and its associated mechanical properties on the release profile of a peptide. It was hypothesized that release of drug molecules are closely related to the mechanical properties that are controlled by phase structures. Experimentally, the relationship between phase structures of lipid liquid crystal system-soy phosphatidyl choline (SPC) and glycerol dioleate (GDO) in water were characterized by polarized light microscopy and small angle X-ray diffraction. Their rheological properties were evaluated with a rheometer and the in vitro release of the peptide as a measure drug release from the LC-depot injection. Three phases: disordered phase, lamellar phase, mixtures of cubic, lamellar, and hexagonal phases were detected by varying formulation compositions. A significant difference in rheological behavior was observed. The disordered phase displayed some attributes of typical Newtonian fluid with lowest viscosity while the lamellar phase showed a shear thinning behavior. Regarding the mechanical strength, the lamellar phase presents the highest storage modulus due to its layer structure followed by mixed phases. Comparing release profiles, the lamellar phase produced a fast release followed by the mixture of phases. In conclusion, this study demonstrates the ability to characterize LC phase structures with microscopy, small angle X-ray diffraction, and rheological measurements and their link to modulating a peptide release profile.

Phase behavior in the biologically important oleic acid/sodium oleate/water system

The phase behavior in the oleic acid/sodium oleate/normal saline (0.15M NaCl aqueous solution) system has been determined. For this purpose visual inspection of samples between crossed polarizers, and Small Angle X-ray diffraction was used to identify the various phases and their unit cell dimensions. A rich phase behavior was observed for the ternary system, featuring reverse micellar, micellar cubic, hexagonal, and cubic phases, and large regions with lamellar phases. As expected the ratio the 'oleic acid/sodium oleate' determines the pH and as a consequence the phase behavior. The results could be modeled by an extended Henderson-Hasselbalch (HH) equation, which takes into account the electrostatic potential at the aqueous lipid interface. The knowledge obtained is important for understanding the lipolysis of triglycerides, as the phase behavior of the end-product of the reaction regulates how well the insoluble product can be dispersed and consequently the kinetics of the process.

An injectable in situ gel with cubic and hexagonal nanostructures for local treatment of chronic periodontitis

Periodontitis is a chronic bacterial infection, and its effective treatment is dependent on the retention of antibiotics of effective concentrations at the periodontal pockets. In this study, a solution-gel based inverse lyotropic liquid crystalline (LLC) system was explored to deliver metronidazole to the periodontal pockets for local treatment of periodontitis. It was found that the metronidazole-loaded LLC precursor spontaneously transformed into gel in the presence of water in the oral cavity. The low viscosity of the precursor would allow its penetration to the rather difficult to reach infection sites, while the adhesiveness and crystalline nanostructures (inverse bicontinuous cubic Pn3m phase and inverse hexagonal phase) of the formed gel would permit its firm adhesion to the periodontal pockets. The LLC system provided sustained drug release over one week in vitro. Results from in vivo study using a rabbit periodontitis model showed that the LLC system was able to maintain the metronidazole concentrations in the periodontal pockets above the minimum inhibition concentration for over 10 days without detectable drug concentration in the blood. Owing to the spontaneous solution-gel transition in the periodontal pockets and unique liquid crystalline nanostructures, the LLC in situ gel provided effective treatment of periodontitis for a prolonged period of time with reduced systematic side effects, compared to metronidazole suspension which was effective for 24 h with detectable metronidazole concentrations in the blood after 6 h.

Direct monitoring of lipid transfer on exposure of citrem nanoparticles to an ethanol solution containing soybean phospholipids by combining synchrotron SAXS with microfluidics

Lipid exchange among citrem nanoparticles and an ethanol micellar solution containing soy phosphatidylcholine was investigated in situ by coupling small angle X-ray scattering with a microfluidic device. The produced soy phosphatidylcholine/citrem nanoparticles have great potential in the development of hemocompatible nanocarriers for drug delivery.

Self-Assembly of Amphiphilic Biotransesterified β-Cyclodextrins: Supramolecular Structure of Nanoparticles and Surface Properties

A series of β-cyclodextrin (βCD) amphiphilic derivatives with varying degrees of substitution were prepared by acylating βCDs on their secondary face using thermolysin to catalyze the transesterification. After dissolution in acetone, the βCD-C_n derivatives (n = 8, 10, 12, 14) were nanoprecipitated in water, where they self-organized into structured particles that were characterized using cryo-transmission electron microscopy (cryo-TEM) images and small-angle X-ray scattering (SAXS) data. Two types of morphologies and ultrastructures were observed depending on the total degree of substitution (TDS) of the parent derivative. The molecules with TDS < 5 formed nanospheres with a multilamellar organization, whereas those with TDS > 5 self-assembled into barrel-like (n = 8, 10, 12) or more tortuous (n = 14) particles with a columnar inverse hexagonal structure. In particular, faceted βCD-C₁₄ particles (TDS = 7) appeared to be composed of several domains with different orientations that were separated by sharp interfaces. Ultrastructural models were proposed on the basis of cryo-TEM images and the analysis of the contrast distribution in different projections of the lattice. Complementary compression isotherm experiments carried out at the air-water interface also suggested that differences in the molecular conformation of the series of derivatives existed depending on whether TDS was lower or higher than 5.

Self-assembled stable sponge-type nanocarries for Brucea javanica oil delivery

Sponge-type nanocarriers (spongosomes) are produced upon dispersion of a liquid crystalline sponge phase formed by self-assembly of an amphiphilic lipid in excess aqueous phase. The inner organization of the spongosomes is built-up by randomly ordered bicontinuous lipid membranes and their surfaces are stabilized by alginate chains providing stealth properties and colloidal stability. The present study elaborates spongosomes for improved encapsulation of Brucea javanica oil (BJO), a traditional Chinese medicine that may strongly inhibit proliferation and metastasis of various cancers. The inner structural organization and the morphology characteristics of BJO-loaded nanocarriers at varying quantities of BJO were determined by cryogenic transmission electron microscopy (Cryo-TEM), small angle X-ray scattering (SAXS) and dynamic light scattering (DLS). Additionally, the drug loading and drug release profiles for BJO-loaded spongosome systems also were determined. We found that the sponge-type liquid crystalline lipid membrane organization provides encapsulation efficiency rate of BJO as high as 90%. In vitro cytotoxicity and apoptosis study of BJO spongosome nanoparticles with A549 cells demonstrated enhanced anti-tumor efficiency. These results suggest potential clinical applications of the obtained safe spongosome formulations.

Addition of n-Alcohols Induces a Variety of Liquid-Crystalline Structures in Surfactant-Rich Cores of Dispersed Block Copolymer/Surfactant Nanoparticles

Poly(acrylamide)-b-complex salts made from a symmetric poly(acrylate-b-acrylamide) block copolymer, where the acrylate charges are neutralized by cationic surfactant counterions, form kinetically stable aqueous dispersions of hierarchical aggregates with a liquid-crystalline complex salt core and a diffuse hydrated shell. By the addition of suitable amounts of long-chain alcohols, such as octanol or decanol, the structure of the internal phase can be varied, producing micellar cubic, hexagonal, lamellar, or reverse hexagonal liquid-crystalline phases. In addition, a disordered reverse micellar phase forms at the highest content of octanol. These core structures are the same as those previously obtained for macroscopic homopolymer poly(acrylate) complex salt/water/n-alcohol systems at the corresponding compositions. The poly(acrylamide)-b-complex salt dispersions are kinetically stable for several weeks, with their colloidal properties and internal structures remaining unchanged. The methodology described here establishes an easy and robust protocol for the preparation of colloidal nanoparticles with variable but controlled internal structures.

Mesoporous self-assembled nanoparticles of biotransesterified cyclodextrins and nonlamellar lipids as carriers of water-insoluble substances

Soft mesoporous hierarchically structured particles were created by the self-assembly of an amphiphilic deep cavitand cyclodextrin βCD-nC₁₀ (degree of substitution n = 7.3), with a nanocavity grafted by multiple alkyl (C₁₀) chains on the secondary face of the βCD macrocycle through enzymatic biotransesterification, and the nonlamellar lipid monoolein (MO). The effect of the non-ionic dispersing agent polysorbate 80 (P80) on the liquid crystalline organization of the nanocarriers and their stability was studied in the context of vesicle-to-cubosome transition. The coexistence of small vesicular and nanosponge membrane objects with bigger nanoparticles with inner multicompartment cubic lattice structures was established as a typical feature of the employed dispersion process. The cryogenic transmission electron microscopy (cryo-TEM) images and small-angle X-ray scattering (SAXS) structural analyses revealed the dependence of the internal organization of the self-assembled nanoparticles on the presence of embedded βCD-nC₁₀ deep cavitands in the lipid bilayers. The obtained results indicated that the incorporated amphiphilic βCD-nC₁₀ building blocks stabilize the cubic lattice packing in the lipid membrane particles, which displayed structural features beyond the traditional CD nanosponges. UV-Vis spectroscopy was employed to characterize the nanoencapsulation of a model hydrophobic dimethylphenylazo-naphthol guest compound (Oil red) in the created nanocarriers. In perspective, these dual porosity carriers should be suitable for co-encapsulation and sustained delivery of peptide, protein or siRNA biopharmaceuticals together with small molecular weight drug compounds or imaging agents.

Sponge Phases and Nanoparticle Dispersions in Aqueous Mixtures of Mono- and Diglycerides

The lipid liquid crystalline sponge phase (L3) has the advantages that it is a nanoscopically bicontinuous bilayer network able to accommodate large amounts of water and it is easy to manipulate due to its fluidity. This paper reports on the detailed characterization of L3 phases with water channels large enough to encapsulate bioactive macromolecules such as proteins. The aqueous phase behavior of a novel lipid mixture system, consisting of diglycerol monooleate (DGMO), and a mixture of mono-, di- and triglycerides (Capmul GMO-50) was studied. In addition, sponge-like nanoparticles (NPs) stabilized by Polysorbate 80 (P80) were prepared based on the DGMO/GMO-50 system, and their structure was correlated with the phase behavior of the corresponding bulk system. These NPs were characterized by dynamic light scattering (DLS), cryo-transmission electron microscopy (Cryo-TEM) and small angle X-ray scattering (SAXS) to determine their size, shape, and inner structure as a function of the DGMO/GMO-50 ratio. In addition, the effect of P80 as stabilizer was investigated. We found that the NPs have aqueous pores with diameters up to 13 nm, similar to the ones in the bulk phase.

Interfacial properties of POPC/GDO liquid crystalline nanoparticles deposited on anionic and cationic silica surfaces

Reversed lipid liquid crystalline nanoparticles (LCNPs) of the cubic micellar (I₂) phase have high potential in drug delivery applications due to their ability to encapsulate both hydrophobic and hydrophilic drug molecules.

Non-lamellar lipid liquid crystalline structures at interfaces

The self-assembly of lipids leads to the formation of a rich variety of nano-structures, not only restricted to lipid bilayers, but also encompassing non-lamellar liquid crystalline structures, such as cubic, hexagonal, and sponge phases. These non-lamellar phases have been increasingly recognized as important for living systems, both in terms of providing compartmentalization and as regulators of biological activity. Consequently, they are of great interest for their potential as delivery systems in pharmaceutical, food and cosmetic applications. The compartmentalizing nature of these phases features mono- or bicontinuous networks of both hydrophilic and hydrophobic domains. To utilize these non-lamellar liquid crystalline structures in biomedical devices for analyses and drug delivery, it is crucial to understand how they interact with and respond to different types of interfaces. Such non-lamellar interfacial layers can be used to entrap functional biomolecules that respond to lipid curvature as well as the confinement. It is also important to understand the structural changes of deposited lipid in relation to the corresponding bulk dispersions. They can be controlled by changing the lipid composition or by introducing components that can alter the curvature or by deposition on nano-structured surface, e.g. vertical nano-wire arrays. Progress in the area of liquid crystalline lipid based nanoparticles opens up new possibilities for the preparation of well-defined surface films with well-defined nano-structures. This review will focus on recent progress in the formation of non-lamellar dispersions and their interfacial properties at the solid/liquid and biologically relevant interfaces.