Membrane/mediator-free rechargeable enzymatic biofuel cell utilizing graphene/single-wall carbon nanotube cogel electrodes

Untangling the Effects of Doping Carbon with Diverse Heteroatoms on the Bioelectrochemistry of Glucose Oxidase

Great enthusiasm for doping carbon materials with nonmetallic heteroatoms for promoting electrical contact of redox enzymes with electrodes in bioelectronics has been aroused. However, systematic studies of different heteroatoms on enzyme activities are still lacking. Herein, choosing glucose oxidase (GOD) as a model enzyme, carbon nanotubes (CNTs) are used as electron carriers to evaluate the effects of heteroatoms' species on the direct electron transfer and catalytic activities of GOD. Experimental data demonstrate that phosphorus (P)-doped CNTs provide the most intimate electrical contact with GOD compared to other elements (B, N, and S) doping, delivering a 3-fold increase in rate constant (k_s, 2.1 s^-1) and an enhanced turnover rate (k_cat, 2.74 × 10^-9 M cm^-2 s^-1) in comparison with CNTs. Meanwhile, theoretical modeling clarifies that the active center of GOD interacts more strongly with P-doped CNTs and maintains their conformation well compared to other CNTs. This study will help to understand the mechanism of heteroatom doping of carbon on the enzymatic electron transfer and shed light on the design of efficient bioelectrocatalytic interfaces.

Energy Harvesting by Mesoporous Reduced Graphene Oxide Enhanced the Mediator-Free Glucose-Powered Enzymatic Biofuel Cell for Biomedical Applications

Harnessing electrochemical energy in an engineered electrical circuit from biochemical substrates in the human body using biofuel cells is gaining increasing research attention in the current decade due to the wide range of biomedical possibilities it creates for electronic devices. In this report, we describe and characterize the construction of just such an enzymatic biofuel cell (EBFC). It is simple, mediator-free, and glucose-powered, employing only biocompatible materials. A novel feature is the two-dimensional mesoporous thermally reduced graphene oxide (rGO) host electrode. An additionally novelty is that we explored the potential of using biocompatible, low-cost filter paper (FP) instead of carbon paper, a conductive polymer, or gold as support for the host electrode. Using glucose (C₆H₁₂O₆) and molecular oxygen (O₂) as the power-generating fuel, the cell consists of a pair of bioelectrodes incorporating immobilized enzymes, the bioanode modified by rGO-glucose oxidase (GOx/rGO), and the biocathode modified by rGO-laccase (Lac/rGO). Scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX), transmission electron microscopy, and Raman spectroscopy techniques have been employed to investigate the surface morphology, defects, and chemical structure of rGO, GOx/rGO, and Lac/rGO. N₂ sorption, SEM/EDX, and powder X-ray diffraction revealed a high Brunauer-Emmett-Teller surface area (179 m² g^-1) mesoporous rGO structure with the high C/O ratio of 80:1 as well. Results from the Fourier transform infrared spectroscopy, UV-visible spectroscopy, and electrochemical impedance spectroscopy studies indicated that GOx remained in its native biochemical functional form upon being embedded onto the rGO matrix. Cyclic voltammetry studies showed that the presence of mesoporous rGO greatly enhanced the direct electrochemistry and electrocatalytic properties of the GOx/rGO and Lac/rGO nanocomposites. The electron transfer rate constant between GOx and rGO was estimated to be 2.14 s^-1. The fabricated EBFC (GOx/rGO/FP-Lac/rGO/FP) using a single GOx/rGO/FP bioanode and a single Lac/rGO/FP biocathode provides a maximum power density (P_max) of 4.0 nW cm^-2 with an open-circuit voltage (V_OC) of 0.04 V and remains stable for more than 15 days with a power output of ∼9.0 nW cm^-2 at a pH of 7.4 under ambient conditions.

Construct α-FeOOH-Reduced Graphene Oxide Aerogel as a Carrier for Glucose Oxidase Electrode

A promising α-FeOOH-reduced graphene oxide aerogel (FeOOH-GA) has been prepared for the assembly of an enzyme electrode. The α-FeOOH-reduced graphene oxide aerogel was characterized by X-ray powder diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The results reveal that graphene oxide is reduced by Fe²⁺ ion and α-FeOOH nanorods anchored on the reduced graphene oxide sheet through the Fe-O-C bond. Analyses using scanning electron microscopy and the Brunauer–Emmett–Teller method show that FeOOH-GA displays a various and interconnected pore structure. The FeOOH-GA was used as a support material on the glass carbon electrode (GCE) for glucose oxidase (GOD). Electrochemistry properties and bioelectrocatalytic activities of Nafion/GOD/FeOOH-GA/GCE were achieved from cyclic voltammetry and electrochemical impedance spectroscopy. The results show that Nafion/GOD/FeOOH-GA/GCE maintains outstanding catalytic activity and electrochemical properties. The FeOOH-GA could immobilize GOD through the hydrophobicity of the reduced graphene oxide and hydroxide radical of α-FeOOH. Appropriate α-FeOOH and diversified pore structure are beneficial for electron transfer, enzyme electrode storage, and interfacial electron transfer rate. All results indicated that the α-FeOOH-reduced graphene oxide aerogel as a carrier could effectively immobilize the tested enzyme.

Flexible and Stretchable Enzymatic Biofuel Cell with High Performance Enabled by Textile Electrodes and Polymer Hydrogel Electrolyte

Biofuel cells with good biocompatibility are promising to be used as the power source for flexible and wearable bioelectronics. We here report a type of highly flexible and stretchable biofuel cells, which are enabled by textile electrodes of graphene/carbon nanotubes (G/CNTs) composite and polymer hydrogel electrolyte. The CNT array covalently grown from a graphene layer not only can be served as a conducting substrate to immobilize enzyme molecules but also can provide efficient charge transport channels between the enzyme and graphene electrode. As a result, the developed biofuel cells deliver a high open-circuit voltage of 0.65 V and output power density of 64.2 μW cm^-2, which are much higher than previously reported results. Benefiting from the unique textile structure of electrodes and the polymer hydrogel electrolyte, the biofuel cells exhibit high retention of power density after 400 bending cycles and even stretched to a high strain of 60%.

Perspectives on C-MEMS and C-NEMS biotech applications

Carbon microelectromechanical system (C-MEMS) and carbon nanoelectromechanical system (C-NEMS) have been identified as promising technologies for a range of biotech applications, including electrochemical biosensors, biofuel cells, neural probes, and dielectrophoretic cell trapping. Research teams around the world have devoted more and more time to this field. After almost two decades of efforts on developing C-MEMS and C-NEMS, a review of the relevant progress and addressing future research opportunities and critical issues is in order. This review first introduces C-MEMS and C-NEMS fabrication processes that fall into two categories: photolithography- and non-photolithography- based techniques. Next, a detailed discussion of the state of the art, and technical challenges and opportunities associated with C-MEMS and C-NEMS devices used in biotech applications are presented. These devices are discussed in the relevant sub-sections of biosensors, biofuel cells, intracorporeal neural probe, dielectrophoresis cell trapping, and cell culture. The review concludes with an exposition of future perspectives in C-MEMS and C-NEMS.

Rational design of N-doped CNTs@C3N4 network for dual-capture of biocatalysts in enzymatic glucose/O2 biofuel cells

Carbonaceous materials are promising electrode materials for enzymatic biofuel cells (EBFCs) due to their excellent electrical conductivity, chemical and physical stability and biocompatibility. Design and preparation of carbon materials with a hollow structure and a rough surface are of great significance for immobilization of enzymes both inside and outside the carbon materials for EBFC applications. We report herein the synthesis of novel carbonaceous materials consisting of bamboo-shaped hollow N-doped carbon nanotubes (N-CNTs) and C3N4 nanosheets (denoted as N-CNTs@C3N4) as electrode materials for dual-capture of enzymes in glucose/O2 EBFCs. The combination of one-dimensional N-CNTs with an open structure and two-dimensional C3N4 nanosheets forms a three-dimensional crosslinking network that significantly enhances the immobilization of enzymes, electrode stability, and mass transfer of substrates, thus boosting the EBFC performance. As a result, EBFCs equipped with N-CNTs@C3N4 can generate a high open circuit potential of 0.93 V and output a maximum power density of 0.57 mW cm-2 at 0.47 V. Additionally, the as-fabricated glucose/O2 EBFCs are capable of directly harvesting energy from various soft drinks, which indicates the promising applications of the N-CNTs@C3N4 nanocomposite as an electrode material for EBFCs.

DNA derived N-doped 3D conductive network with enhanced electrocatalytic activity and stability for membrane-less biofuel cells

Enzymes are promising electrocatalysts in many biological processes. We proposed two strategies, co-immobilization and three-dimensional (3D) space design, to strengthen electron transfer (ET). In this research, DNA base and CNT were mixed in an aqueous solution; then the mixture was dried and ground. Finally, the powder was annealed in N₂ to obtain DNA derived N-doped 3D conductive network (N-G@CNT). N-G@CNT immobilized mediators on itself through adsorption. Such 3D space structure shows high activity toward a set of critical electrochemical reactions and high-performance in enzymatic biofuel cells (EBFCs). It is found that N-G@CNT conductive network possesses an interconnected porous structure and well-developed porosity. As a result, the membrane-less EBFCs equipped with enzyme/mediator co-immobilization N-G@CNT bioelectrodes were measured in a model 5 mM glucose-containing aqueous solution, human serum, and rabbit whole blood, respectively, which can generate 0.34, 0.078, and 0.15 mW cm^-2 power density, respectively. The constant-current discharge method carried out in a model 5 mM glucose-containing aqueous solution shows that the discharge time reached 19 h at a discharge current density of 0.01 mA cm^-2. The membrane EBFCs can deliver a high open circuit voltage of 0.68 V, a short-circuit current density of 2 mA cm^-2, and a maximum power density of 0.5 mW cm^-2.

Recent Advances in the Direct Electron Transfer-Enabled Enzymatic Fuel Cells

Direct electron transfer (DET), which requires no mediator to shuttle electrons from enzyme active site to the electrode surface, minimizes complexity caused by the mediator and can further enable miniaturization for biocompatible and implantable devices. However, because the redox cofactors are typically deeply embedded in the protein matrix of the enzymes, electrons generated from oxidation reaction cannot easily transfer to the electrode surface. In this review, methods to improve the DET rate for enhancement of enzymatic fuel cell performances are summarized, with a focus on the more recent works (past 10 years). Finally, progress on the application of DET-enabled EFC to some biomedical and implantable devices are reported.

Ethanol Biofuel Cells: Hybrid Catalytic Cascades as a Tool for Biosensor Devices

Biofuel cells use chemical reactions and biological catalysts (enzymes or microorganisms) to produce electrical energy, providing clean and renewable energy. Enzymatic biofuel cells (EBFCs) have promising characteristics and potential applications as an alternative energy source for low-power electronic devices. Over the last decade, researchers have focused on enhancing the electrocatalytic activity of biosystems and on increasing energy generation and electronic conductivity. Self-powered biosensors can use EBFCs while eliminating the need for an external power source. This review details improvements in EBFC and catalyst arrangements that will help to achieve complete substrate oxidation and to increase the number of collected electrons. It also describes how analytical techniques can be employed to follow the intermediates between the enzymes within the enzymatic cascade. We aim to demonstrate how a high-performance self-powered sensor design based on EBFCs developed for ethanol detection can be adapted and implemented in power devices for biosensing applications.

Recent progress of graphene based nanomaterials in bioelectrochemical systems

The application of graphene (Gr) to microbial fuel cells (MFCs) and microbial electrolysis cell (MECs) is considered a very promising approach in terms of enhancing their performance. The superior Gr properties of high electrical and thermal conductivities, along with: superior specific surface area, high electron mobility, and mechanical strength, are the key features that endorse this. Factors impeding the advancement of a microbial fuel cell into commercialization involve primarily the cost of their components, and their production on a small scale. Gr with such outstanding characteristics can help mitigate these challenges, when used as electrode material. The application of Gr as an anode material improves the efficiency of electron transfer and bacterial attachment. When used as a cathode material, it supports the oxygen reduction reaction. This investigation, presents a thorough analysis of the feasibility of Gr as an electrode material in both MFC and MEC applications - based on experimental results from the investigation. Current technological advancements in the implementation of Gr in MFC and MEC are also highlighted in this review. To summarise, the investigation exposes critical issues impeding the advancement of microbial fuel cells, and proposes possible solutions to mitigate these challenges.

Applications of chitosan (CHI)-reduced graphene oxide (rGO)-polyaniline (PAni) conducting composite electrode for energy generation in glucose biofuel cell

A glassy carbon electrode (GC) immobilized with chitosan (CHI)@reduced graphene (rGO)-polyaniline (PAni)/ferritin (Frt)/glucose oxidase (GOx) bioelectrode was prepared. The prepared electrode was characterized by using cyclic voltammetry (CV), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) techniques. The morphological characterization was made by scanning electron microsopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. This bioelectrode provided a stable current response of 3.5 ± 0.02 mAcm-2 in 20 mM glucose. The coverage of enzyme on 0.07 cm2 area of electrode modified with CHI@rGO-PAni/Frt was calculated to be 3.80 × 10-8 mol cm-2.

Development of graphene-based enzymatic biofuel cells: A minireview

Enzymatic biofuel cells (EBFCs) have attracted increasing attention due to their potential to harvest energy from a wide range of fuels under mild conditions. Fabrication of effective bioelectrodes is essential for the practical application of EBFCs. Graphene possesses unique physiochemical properties making it an attractive material for the construction of EBFCs. Despite these promising properties, graphene has not been used for EBFCs as frequently as carbon nanotubes, another nanoscale carbon allotrope. This review focuses on current research progress in graphene-based electrodes, including electrodes modified with graphene derivatives and graphene composites, as well as free-standing graphene electrodes. Particular features of graphene-based electrodes such as high conductivity, mechanical flexibility and high porosity for bioelectrochemical applications are highlighted. Reports on graphene-based EBFCs from the last five years are summarized, and perspectives for graphene-based EBFCs are offered.

Immobilized Enzymes on Graphene as Nanobiocatalyst

Using enzymes as bioelectrocatalysts is an important step toward the next level of biotechnology for energy production. In such biocatalysts, a sacrificial cofactor as an electron and proton source is needed. This is a great obstacle for upscaling, due to cofactor instability and product separation issues, which increase the costs. Here, we report a cofactor-free electroreduction of CO2 to a high energy density chemical (methanol) catalyzed by enzyme-graphene hybrids. The biocatalyst consists of dehydrogenases covalently bound on a well-defined carboxyl graphene derivative, serving the role of a conductive nanoplatform. This nanobiocatalyst achieves reduction of CO2 to methanol at high current densities, which remain unchanged for at least 20 h of operation, without production of other soluble byproducts. It is thus shown that critical improvements on the stability and rate of methanol production at a high Faradaic efficiency of 12% are possible, due to the effective electrochemical process from the electrode to the enzymes via the graphene platform.

A Lactate/Oxygen Biofuel Cell: The Coupled Lactate Oxidase Anode and PGM-Free Fe-N-C Cathode

The rapid development of both wearable and implantable biofuel cells has triggered more and more attention on the lactate biofuel cell. The novel lactate/oxygen biofuel cell (L/O-BFC) with the direct electron transfer (DET)-type lactate oxidase (LOx) anode and the platinum group metal (PGM)-free Fe-N-C cathode is designed and constructed in this paper. In such a reasonable design, the surface-controlled direct two-electron electrochemical reaction of the lactate oxidase was determined by cyclic voltammetry (CV) on the carbon nanotube (CNT) modified electrode with favorable high electrochemical active surface area and electronic conductivity. Additionally, the biosensor based on DET-type LOx modified electrode impressively presented linear response to lactate with different concentrations from 0.000 mM to 12.300 mM. In particular, the apparent Michealis-constant (K_M^app) calculated as 0.140 mM clearly indicates that LOx on CNT has strong affinity to the substrate lactate. Meanwhile, 4e^- transfer oxygen reduction reaction (ORR) was proven to take place on the Fe-N-C catalysts inthe 0.1 M PBS system, indicating the advantage by using the Fe-N-C catalysts at the cathode of L/O-BFC. Last but not least, the L/O-BFC with the direct electron transfer (DET)-type lactate oxidase(LOx) anode and the Fe-N-C cathode produced an superior open circuit potential (OCP) of 0.264 V and a maximum output power density (OPD) of 24.430 μW cm^-2 in O₂ saturated 95.020 mM lactate solution. The above results will not only bring about significant interest in developing a DET-type biofuel cell, but also offer guiding direction to explore novel catalyst materials for the biofuel cell. This work enriches the research content and may push developments of the implantable and wearable biofuel cell forward.

Challenges and Opportunities of Carbon Nanomaterials for Biofuel Cells and Supercapacitors: Personalized Energy for Futuristic Self-Sustainable Devices

Various carbon allotropes are fundamental components in electrochemical energy-conversion and energy-storage devices, e.g., biofuel cells (BFCs) and supercapacitors. Recently, biodevices, particularly wearable and implantable devices, are of distinct interest in biomedical, fitness, academic, and industrial fields due to their new fascinating capabilities for personalized applications. However, all biodevices require a sustainable source of energy, bringing widespread attention to energy research. In this review, we detail the progress in BFCs and supercapacitors attributed to carbon materials. Self-powered biosensors for futuristic biomedical applications are also featured. To develop these energy devices, many challenges needed to be addressed. For this reason, there is a need to: optimize the electron transfer between the enzymatic site and electrode; enhance the power efficiency of the device in fluctuating oxygen conditions; strengthen the efficacy of enzymatic reactions at the carbon-based electrodes; increase the electrochemically accessible surface area of the porous electrode materials; and refine the flexibility of traditional devices by introducing a mechanical resiliency of electrochemical devices to withstand daily multiplexed movements. This article will also feature carbon nanomaterial research alongside opportunities to enhance energy technology and address the challenges facing the field of personalized applications. Carbon-based energy devices have proved to be sustainable and compatible energy alternatives for biodevices within the human body, serving as attractive options for further developing diverse domains, including individual biomedical applications.

Tackling the Challenges of Enzymatic (Bio)Fuel Cells

The ever-increasing demands for clean and sustainable energy sources combined with rapid advances in biointegrated portable or implantable electronic devices have stimulated intensive research activities in enzymatic (bio)fuel cells (EFCs). The use of renewable biocatalysts, the utilization of abundant green, safe, and high energy density fuels, together with the capability of working at modest and biocompatible conditions make EFCs promising as next generation alternative power sources. However, the main challenges (low energy density, relatively low power density, poor operational stability, and limited voltage output) hinder future applications of EFCs. This review aims at exploring the underlying mechanism of EFCs and providing possible practical strategies, methodologies and insights to tackle these issues. First, this review summarizes approaches in achieving high energy densities in EFCs, particularly, employing enzyme cascades for the deep/complete oxidation of fuels. Second, strategies for increasing power densities in EFCs, including increasing enzyme activities, facilitating electron transfers, employing nanomaterials, and designing more efficient enzyme-electrode interfaces, are described. The potential of EFCs/(super)capacitor combination is discussed. Third, the review evaluates a range of strategies for improving the stability of EFCs, including the use of different enzyme immobilization approaches, tuning enzyme properties, designing protective matrixes, and using microbial surface displaying enzymes. Fourth, approaches for the improvement of the cell voltage of EFCs are highlighted. Finally, future developments and a prospective on EFCs are envisioned.

Multicomponent bionanocomposites based on clay nanoarchitectures for electrochemical devices

Based on the unique ability of defibrillated sepiolite (SEP) to form stable and homogeneous colloidal dispersions of diverse types of nanoparticles in aqueous media under ultrasonication, multicomponent conductive nanoarchitectured materials integrating halloysite nanotubes (HNTs), graphene nanoplatelets (GNPs) and chitosan (CHI) have been developed. The resulting nanohybrid suspensions could be easily formed into films or foams, where each individual component plays a critical role in the biocomposite: HNTs act as nanocontainers for bioactive species, GNPs provide electrical conductivity (enhanced by doping with MWCNTs) and, the CHI polymer matrix introduces mechanical and membrane properties that are of key significance for the development of electrochemical devices. The resulting characteristics allow for a possible application of these active elements as integrated multicomponent materials for advanced electrochemical devices such as biosensors and enzymatic biofuel cells. This strategy can be regarded as an "a la carte" menu, where the selection of the nanocomponents exhibiting different properties will determine a functional set of predetermined utility with SEP maintaining stable colloidal dispersions of different nanoparticles and polymers in water.

A shriveled rectangular carbon tube with the concave surface for high-performance enzymatic glucose/O2 biofuel cells

In this study, a novel carbon tube was prepared by carbonizing a rectangular polypyrrole (RPPy) tube at a high temperature for the construction of enzymatic biofuel cells with high performance. SEM and TEM images clearly showed that the initial PPy presented a rectangular tube shape, while the carbonized PPy became a shriveled rectangular tube with a concave surface, which might be beneficial for enzyme immobilization and electrochemical applications. The glucose oxidase (GOx)- or laccase (Lac)-modified electrodes based on carbonized RPPy exhibited excellent bioelectrochemical performance. In addition, a biofuel cell (GOx, glucose/O₂, Lac) was assembled, and the open-circuit voltage reached 1.16 V. The maximum power density was measured to 0.350 mW cm^-2, which correlated to the gravimetric power density of 0.265 mW mg^-1 (per mg of GOx) at 0.85 V. The constant-current discharge method was used to further evaluate the continuous discharge capacity. The discharge time reached 49.9 h at a discharge current of 0.2 mA before the voltage was lower than 0.8 V. Furthermore, three of the fabricated biofuel cells in series were able to continually light up a white light-emitting diode (LED) whose turn-on voltage was ca. 2.4 V for more than 48 h. This study suggests that carbonized conducting polymers may become a useful electrode material for the development of enzymatic biofuel cells.

High-power hybrid biofuel cells using layer-by-layer assembled glucose oxidase-coated metallic cotton fibers

Electrical communication between an enzyme and an electrode is one of the most important factors in determining the performance of biofuel cells. Here, we introduce a glucose oxidase-coated metallic cotton fiber-based hybrid biofuel cell with efficient electrical communication between the anodic enzyme and the conductive support. Gold nanoparticles are layer-by-layer assembled with small organic linkers onto cotton fibers to form metallic cotton fibers with extremely high conductivity (>2.1×104 S cm-1), and are used as an enzyme-free cathode as well as a conductive support for the enzymatic anode. For preparation of the anode, the glucose oxidase is sequentially layer-by-layer-assembled with the same linkers onto the metallic cotton fibers. The resulting biofuel cells exhibit a remarkable power density of 3.7 mW cm-2, significantly outperforming conventional biofuel cells. Our strategy to promote charge transfer through electrodes can provide an important tool to improve the performance of biofuel cells.

Three-Dimensional, Enzyme Biohydrogel Electrode for Improved Bioelectrocatalysis

Higher loading of enzymes on electrodes and efficient electron transfer from the enzyme to the electrode are urgently needed to enhance the current density of biofuel cells. The two-dimensional nature of the electrode surface limits the enzyme loading on the surface, and unfavorable interactions with electrode surfaces cause inactivation of the enzyme. Benign biohydrogels are designed here to address enzyme degradation, and the three-dimensional nature of the biohydrogel enhanced the enzyme density per unit area. A general strategy is demonstrated here using a redox active enzyme glucose oxidase embedded in a bovine serum albumin biohydrogel on flexible carbon cloth electrodes. In the presence of ferricyanide as a mediator, this bioelectrode generated a maximum current density (j_max) of 13.2 mA·cm^-2 at 0.45 V in the presence of glucose with a sensitivity of 67 μA·mol^-1·cm^-2 and a half-life of >2 weeks at room temperature. A strong correlation of current density with water uptake by the biohydrogel was observed. Moreover, a soluble mediator (sodium ferricyanide) in the biohydrogel enhanced the current density by ∼1000-fold, and citrate-phosphate buffer has been found to be the best to achieve the maximum current density. A record 2.2% of the loaded enzyme was electroactive, which is greater than the highest value reported (2-fold). Stabilization of the enzyme in the biohydrogel resulted in retention of the enzymatic activity over a wide range of pH (4.0-8.0). We showed here that biohydrogels are excellent media for enzymatic electron transfer reactions required for bioelectronics and biofuel cell applications.

Magnetic Nanoparticle-Reduced Graphene Oxide Nanocomposite as a Novel Bioelectrode for Mediatorless-Membraneless Glucose Enzymatic Biofuel Cells

In this work, an enzymatic biofuel cell (EBC) based on a membraneless and mediatorless glucose enzymatic fuel cell system was constructed for operation in physiological conditions (pH 7.0 and temperature 37 °C). The new platform EBC made of nanocomposite, including magnetic nanoparticles (Fe₃O₄ NPs) and reduced graphene oxide (RGO), was used for the immobilization of glucose oxidase (GOD) as bioanode and bilirubin oxidase (BOD) as biocathode. The EBC bioelectrodes were fabricated without binder or adhesive agents for immobilized enzyme and the first EBC using superparamagnetic properties with Fe₃O₄ NPs has been reported. The performance of the EBC was evaluated with promising results. In EBC tests, the maximum power density of the EBC was 73.7 μW cm⁻² and an open circuit voltage (OCV) as +0.63 V with 5 mM of glucose concentration for the physiological condition of humans. The Fe₃O₄-RGO nanocomposite offers remarkable enhancement in large surface areas, is a favorable environment for enzyme immobilization, and facilitates electron transfer between enzymes and electrode surfaces. Fe₃O₄ and RGO have been implied as new promising composite nanomaterials for immobilizing enzymes and efficient platforms due to their superparamagnetism properties. Thus, glucose EBCs could potentially be used as self-powered biosensors or electric power sources for biomedical device applications.

Nanowire-Mesh-Templated Growth of Out-of-Plane Three-Dimensional Fuzzy Graphene

Graphene, a honeycomb sp² hybridized carbon lattice, is a promising building block for hybrid-nanomaterials due to its electrical, mechanical, and optical properties. Graphene can be readily obtained through mechanical exfoliation, solution-based deposition of reduced graphene oxide (rGO), and chemical vapor deposition (CVD). The resulting graphene films' topology is two-dimensional (2D) surface. Recently, synthesis of three-dimensional (3D) graphitic networks supported or templated by nanoparticles, foams, and hydrogels was reported. However, the resulting graphene films lay flat on the surface, exposing 2D surface topology. Out-of-plane grown carbon nanostructures, such as vertically aligned graphene sheets (VAGS) and vertical carbon nanowalls (CNWs), are still tethered to 2D surface. 3D morphology of out-of-plane growth of graphene hybrid-nanomaterials which leverages graphene's outstanding surface-to-volume ratio has not been achieved to date. Here we demonstrate highly controlled synthesis of 3D out-of-plane single- to few-layer fuzzy graphene (3DFG) on a Si nanowire (SiNW) mesh template. By varying graphene growth conditions (CH₄ partial pressure and process time), we control the size, density, and electrical properties of the NW templated 3DFG (NT-3DFG). 3DFG growth can be described by a diffusion-limited-aggregation (DLA) model. The porous NT-3DFG meshes exhibited high electrical conductivity of ca. 2350 S m^-1. NT-3DFG demonstrated exceptional electrochemical functionality, with calculated specific electrochemical surface area as high as ca. 1017 m² g^-1 for a ca. 7 μm thick mesh. This flexible synthesis will inspire formation of complex hybrid-nanomaterials with tailored optical and electrical properties to be used in future applications such as sensing, and energy conversion and storage.

Creep- and fatigue-resistant, rapid piezoresistive responses of elastomeric graphene-coated carbon nanotube aerogels over a wide pressure range

Lightweight, flexible piezoresistive materials with wide operational pressure ranges are in demand for applications such as human physical activity and health monitoring, robotics, and for functional interfacing between living systems and wearable electronics. Piezoresistivity of many elastomeric foams of polymers and carbon allotropes satisfies much of the required characteristics for these applications except creep and fatigue resistance due to their viscoelasticity, critically limiting the reliability and lifetime of integrated devices. We report the piezoresistive responses from aerogels of graphene-coated single-walled carbon nanotubes (SWCNTs), made using a facile and versatile sol-gel method. Graphene crosslinks the junctions of the underlying random network of SWCNTs, generating lightweight elastomeric aerogels with a mass density of ≈11 mg mL^-1 (volume fraction ≈7.7 × 10^-3) and a Young's modulus of ≈0.4 MPa. The piezoresistivity of these aerogels spans wide compressive pressures up to at least 120 kPa with sensitivity that exhibit ultrafast temporal responses of <27 ms and <3% delay ratio over 10⁴ compressive loading-unloading cycles at rates between 0.1-10 Hz. Most importantly, the piezoresistive responses do not show any creep at least for 1 hour and 80 kPa of compressive static loading. We suggest that the fatigue- and creep-resistant, ultrafast piezoresistive responses of these elastomeric aerogels are highly attractive for use in dynamic and static lightweight, pressure sensing applications such as human activity monitoring and soft robotics.

Al-Based porous coordination polymer derived nanoporous carbon for immobilization of glucose oxidase and its application in glucose/O2 biofuel cell and biosensor

Herein, we report the first example of using the Al-based porous coordination polymers (Al-PCP) as a template for preparation of nanoporous carbon through a two-step carbonized method.

Direct electrochemistry and bioelectrocatalysis of glucose oxidase in CS/CNC film and its application in glucose biosensing and biofuel cells

Due to their unique physicochemical properties, carbon nanochips (CNCs) have been used for studies of the direct electrochemical and electrocatalytic properties of oxidoreductase.

Amphiphilic Polymer Mediators Promoting Electron Transfer on Bioanodes with PQQ-Dependent Glucose Dehydrogenase

Redox-active phenazinium salts bonded to amphiphilic polymer backbones are demonstrated to function as high-performance electron-transfer mediators in enzymatic bioanodes applicable to biofuel cells. The redox-active moieties could be easily tethered to the electrodes by physical adsorption of the hydrophobic regions of the polymer backbones onto the electrode surface. On the other hand, long hydrophilic chains were essential to ensure high mobility of the redox-active moieties in aqueous solutions and to enhance their electron-transfer properties. We found that an amphiphilic mediator with a linear polymer backbone exhibited stable adsorption behavior on the electrode surface and generated high bioelectrocatalytic current (>1.8 ± 0.32 mA/cm²) in the presence of pyrroloquinoline quinone-dependent glucose dehydrogenase and an aqueous solution of glucose fuel. This current was more than two times higher than that of an electrode treated with a low-molecular-weight phenazinium salt. Moreover, the bioelectrode modified with the polymer mediator retained the high electrocatalytic current after 10 exchanges of the glucose fuel. The mediator-modified bioelectrodes are expected to be useful for various bio-related energy and electronic devices.

Enzymatic Biofuel Cells on Porous Nanostructures

Biofuel cells (BFCs) that utilize enzymes as catalysts represent a new sustainable and renewable energy technology. Numerous efforts have been directed to improve the performance of the enzymatic BFCs (EBFCs) with respect to power output and operational stability for further applications in portable power sources, self-powered electrochemical sensing, implantable medical devices, etc. The latest advances in EBFCs based on porous nanoarchitectures over the past 5 years are detailed here. Porous matrices from carbon, noble metals, and polymers promote the development of EBFCs through the electron transfer and mass transport benefits. Some key issues regarding how these nanostructured porous media improve the performance of EBFCs are also discussed.

Immobilization of bilirubin oxidase on graphene oxide flakes with different negative charge density for oxygen reduction. The effect of GO charge density on enzyme coverage, electron transfer rate and current density

Previously we showed that an effective bilirubin oxidase (BOD)-based biocathode using graphene oxide (GO) could be prepared in 2 steps: 1. electrostatic adsorption of BOD on GO; 2. electrochemical reduction of the BOD-GO composite to form a BOD-ErGO (electrochemically reduced GO) film on the electrode. In order to identify an optimal charge density of GO for BOD-ErGO composite preparation, several GO fractions differing in an average flake size and ζ-potential were prepared using centrifugation and consequently employed for BOD-ErGO biocathode preparation. A simple way to express surface charge density of these particular GO nanosheets was developed. The values obtained were then correlated with biocatalytic and electrochemical parameters of the prepared biocathodes, i.e. electrocatalytically active BOD surface coverage (Γ), heterogeneous electron transfer rate (k_S) and a maximum biocatalytic current density. The highest bioelectrocatalytic current density of (597±25)μAcm^-2 and the highest Γ of (23.6±0.9)pmolcm^-2 were obtained on BOD-GO composite having the same moderate negative charge density, but the highest k_S of (79.4±4.6)s^-1 was observed on BOD-GO composite having different negative charge density. This study is a solid foundation for others to consider the influence of a charge density of GO on direct bioelectrochemistry/bioelectrocatalysis of other redox enzymes applicable for construction of biosensors, bioanodes, biocathodes or biofuel cells.

Improved power density of an enzymatic biofuel cell with fibrous supports of high curvature

We developed and characterized two separate enzymatic biofuel cell systems attributing improved performance to electrode support morphological characteristics.

Recent advance in fabricating monolithic 3D porous graphene and their applications in biosensing and biofuel cells

Graphene shows great potential in biosensing and bioelectronics. To facilitate graphene's applications and enhance its performance, recently, three-dimensional (3D) graphene-based materials especially free-standing porous graphene with tunable pore size and void space, have attracted increasing attention for bio-related applications owing to their special features. 3D graphene usually shows the following merits such as an interconnected porous network, a high electronic conductivity, a large active surface area, good chemical/thermal stability and can be more easily handled compared with dispersed graphene sheets. With modified surface properties, graphene can also be bio-friendly. These properties make 3D graphene a perfect candidate as high-performance electrode materials in bioelectronics devices. In this review, we discuss recent advance in fabricating monolithic 3D graphene and their applications in biosensing and biofuel cells.