Immunoglobulin-type domains of titin: same fold, different stability?

Visualization of cardiac thick filament dynamics in ex vivo heart preparations

RATIONALE

Cardiac muscle cells are terminally differentiated after birth and must beat continually throughout one's lifetime. This mechanical process is driven by the sliding of actin-based thin filaments along myosin-based thick filaments, organized within sarcomeres. Despite costly energetic demand, the half-life of the proteins that comprise the cardiac thick filaments is ∼10 days, with individual molecules being replaced stochastically, by unknown mechanisms.

OBJECTIVES

To allow for the stochastic replacement of molecules, we hypothesized that the structure of thick filaments must be highly dynamic in vivo.

METHODS AND RESULTS

To test this hypothesis in adult mouse hearts, we replaced a fraction of the endogenous myosin regulatory light chain (RLC), a component of thick filaments, with GFP-labeled RLC by adeno-associated viral (AAV) transduction. The RLC-GFP was properly localized to the heads of the myosin molecules within thick filaments in ex vivo heart preparations and had no effect on heart size or actin filament siding in vitro. However, the localization of the RLC-GFP molecules was highly mobile, changing its position within the sarcomere on the minute timescale, when quantified by fluorescence recovery after photobleaching (FRAP) using multiphoton microscopy. Interestingly, RLC-GFP mobility was restricted to within the boundaries of single sarcomeres. When cardiomyocytes were lysed, the RLC-GFP remained strongly bound to myosin heavy chain, and the intact myosin molecules adopted a folded, compact configuration, when disassociated from the filaments at physiological ionic conditions.

CONCLUSIONS

These data demonstrate that the structure of the thick filament is highly dynamic in the intact heart, with a rate of molecular exchange into and out of thick filaments that is ∼1500 times faster than that required for the replacement of molecules through protein synthesis or degradation.

Stretching the story of titin and muscle function

The discovery of the giant protein titin, also known as connectin, dates almost half a century back. In this review, I recapitulate major advances in the discovery of the titin filaments and the recognition of their properties and function until today. I briefly discuss how our understanding of the layout and interactions of titin in muscle sarcomeres has evolved and review key facts about the titin sequence at the gene (TTN) and protein levels. I also touch upon properties of titin important for the stability of the contractile units and the assembly and maintenance of sarcomeric proteins. The greater part of my discussion centers around the mechanical function of titin in skeletal muscle. I cover milestones of research on titin's role in stretch-dependent passive tension development, recollect the reasons behind the enormous elastic diversity of titin, and provide an update on the molecular mechanisms of titin elasticity, details of which are emerging even now. I reflect on current knowledge of how muscle fibers behave mechanically if titin stiffness is removed and how titin stiffness can be dynamically regulated, such as by posttranslational modifications or calcium binding. Finally, I highlight novel and exciting, but still controversially discussed, insight into the role titin plays in active tension development, such as length-dependent activation and contraction from longer muscle lengths.

The N2A region of titin has a unique structural configuration

The N2A segment of titin is a main signaling hub in the sarcomeric I-band that recruits various signaling factors and processing enzymes. It has also been proposed to play a role in force production through its Ca²⁺-regulated association with actin. However, the molecular basis by which N2A performs these functions selectively within the repetitive and extensive titin chain remains poorly understood. Here, we analyze the structure of N2A components and their association with F-actin. Specifically, we characterized the structure of its Ig domains by elucidating the atomic structure of the I81-I83 tandem using x-ray crystallography and computing a homology model for I80. Structural data revealed these domains to present heterogeneous and divergent Ig folds, where I81 and I83 have unique loop structures. Notably, the I81-I83 tandem has a distinct rotational chain arrangement that confers it a unique multi-domain topography. However, we could not identify specific Ca²⁺-binding sites in these Ig domains, nor evidence of the association of titin N2A components with F-actin in transfected C2C12 myoblasts or C2C12-derived myotubes. In addition, F-actin cosedimentation assays failed to reveal binding to N2A. We conclude that N2A has a unique architecture that predictably supports its selective recruitment of binding partners in signaling, but that its mechanical role through interaction with F-actin awaits validation.

Membrane anchoring of Epstein-Barr virus gp42 inhibits fusion with B cells even with increased flexibility allowed by engineered spacers

We recently described the architecture of the Epstein-Barr virus (EBV) fusion-triggering complex consisting of the EBV B cell receptor human leukocyte antigen (HLA) class II and the EBV-encoded proteins gp42 and gH/gL. The architecture of this structure positioned the main body of gp42, comprising the C-type lectin domain (CTLD), away from the membrane and distant from where the membrane-bound form of gp42 might be tethered. gp42 is a type II membrane glycoprotein, with functional gp42 formed by cleavage near the gp42 amino-terminal transmembrane domain. This cleavage results in an approximately 50-amino-acid unstructured region that is responsible for binding gH/gL with nanomolar affinity. Our previous studies had shown that membrane-bound gp42 is not functional in B cell fusion. To investigate whether we could restore gp42 function by extending it from the membrane, we introduced one, two, and four structured immunoglobulin-like domains from muscle protein titin into a membrane-bound form of gp42 and tested function in binding to gHgL and HLA class II and function in fusion. We hypothesized that cleavage of gp42 generates a soluble functional form that relieves steric hindrance imposed on gHgL by membrane-bound gp42. All of the linker mutants had a dominant-negative effect on gp42 function, indicating that gp42 fusion function could not be restored simply by the addition of one to four titin domains.

IMPORTANCE

Epstein-Barr virus (EBV) is associated with numerous diseases from benign mononucleosis to Burkitt's and Hodgkin's lymphoma, nasopharyngeal and gastric carcinoma, and lymphoproliferative disorders in patients with immune dysfunction resulting from immune suppression. Among the glycoproteins important for fusion, gp42, along with gH/gL, determines EBV tropism between epithelial and B cells. The function of gp42 is dependent on N-terminal cleavage, since membrane-bound gp42 cannot mediate fusion. We further investigated whether insertion of a linker into membrane-bound gp42 would relieve steric hindrance imposed on membrane-bound gp42 and restore fusion function. However, adding one, two, or four structured immunoglobulin-like domains to membrane gp42 did not restore fusion activity, indicating that the architecture and membrane orientation of the B cell fusion-triggering complex of EBV may be easily perturbed and that gp42 cleavage is essential for B cell fusion.

A structure-based model fails to probe the mechanical unfolding pathways of the titin I27 domain

We discuss the use of a structure based Cα-Go model and Langevin dynamics to study in detail the mechanical properties and unfolding pathway of the titin I27 domain. We show that a simple Go-model does detect correctly the origin of the mechanical stability of this domain. The unfolding free energy landscape parameters x(u) and ΔG(‡), extracted from dependencies of unfolding forces on pulling speeds, are found to agree reasonably well with experiments. We predict that above v = 10(4) nm/s the additional force-induced intermediate state is populated at an end-to-end extension of about 75 Å. The force-induced switch in the unfolding pathway occurs at the critical pulling speed v(crit) ≈ 10(6)-10(7) nm/s. We argue that this critical pulling speed is an upper limit of the interval where Bell's theory works. However, our results suggest that the Go-model fails to reproduce the experimentally observed mechanical unfolding pathway properly, yielding an incomplete picture of the free energy landscape. Surprisingly, the experimentally observed intermediate state with the A strand detached is not populated in Go-model simulations over a wide range of pulling speeds. The discrepancy between simulation and experiment is clearly seen from the early stage of the unfolding process which shows the limitation of the Go model in reproducing unfolding pathways and deciphering the complete picture of the free energy landscape.

The sequence signature of an Ig-fold

Ig superfamily (IgSF) constitutes the largest superfamily in human genome. In particular, Ig-like domains are the most abundant structural module within cell surface receptors, functioning in nervous as well as immune system. Here I describe some key sequence signature of an I-set Ig-like domain from known structures of IgSF members. These signature residues define the I-set Ig-like domain, which should aid structural and functional studies of cell surface receptors.

Individual globular domains and domain unfolding visualized in overstretched titin molecules with atomic force microscopy

Titin is a giant elastomeric protein responsible for the generation of passive muscle force. Mechanical force unfolds titin's globular domains, but the exact structure of the overstretched titin molecule is not known. Here we analyzed, by using high-resolution atomic force microscopy, the structure of titin molecules overstretched with receding meniscus. The axial contour of the molecules was interrupted by topographical gaps with a mean width of 27.7 nm that corresponds well to the length of an unfolded globular (immunoglobulin and fibronectin) domain. The wide gap-width distribution suggests, however, that additional mechanisms such as partial domain unfolding and the unfolding of neighboring domain multimers may also be present. In the folded regions we resolved globules with an average spacing of 5.9 nm, which is consistent with a titin chain composed globular domains with extended interdomain linker regions. Topographical analysis allowed us to allocate the most distal unfolded titin region to the kinase domain, suggesting that this domain systematically unfolds when the molecule is exposed to overstretching forces. The observations support the prediction that upon the action of stretching forces the N-terminal ß-sheet of the titin kinase unfolds, thus exposing the enzyme's ATP-binding site and hence contributing to the molecule's mechanosensory function.

The capsular polysaccharide Vi from Salmonella typhi is a B1b antigen

Vaccination with purified capsular polysaccharide Vi Ag from Salmonella typhi can protect against typhoid fever, although the mechanism for its efficacy is not clearly established. In this study, we have characterized the B cell response to this vaccine in wild-type and T cell-deficient mice. We show that immunization with typhoid Vi polysaccharide vaccine rapidly induces proliferation in B1b peritoneal cells, but not in B1a cells or marginal zone B cells. This induction of B1b proliferation is concomitant with the detection of splenic Vi-specific Ab-secreting cells and protective Ab in Rag1-deficient B1b cell chimeras generated by adoptive transfer-induced specific Ab after Vi immunization. Furthermore, Ab derived from peritoneal B cells is sufficient to confer protection against Salmonella that express Vi Ag. Expression of Vi by Salmonella during infection did not inhibit the development of early Ab responses to non-Vi Ags. Despite this, the protection conferred by immunization of mice with porin proteins from Salmonella, which induce Ab-mediated protection, was reduced postinfection with Vi-expressing Salmonella, although protection was not totally abrogated. This work therefore suggests that, in mice, B1b cells contribute to the protection induced by Vi Ag, and targeting non-Vi Ags as subunit vaccines may offer an attractive strategy to augment current Vi-based vaccine strategies.

Defining the geometry of the two-component proteasome degron

The eukaryotic 26S proteasome controls cellular processes by degrading specific regulatory proteins. Most proteins are targeted for degradation by a signal or degron that consists of two parts: a proteasome-binding tag, typically covalently attached polyubiquitin chains, and an unstructured region that serves as the initiation region for proteasomal proteolysis. Here we have characterized how the arrangement of the two degron parts in a protein affects degradation. We found that a substrate is degraded efficiently only when its initiation region is of a certain minimal length and is appropriately separated in space from the proteasome-binding tag. Regions that are located too close or too far from the proteasome-binding tag cannot access the proteasome and induce degradation. These spacing requirements are different for a polyubiquitin chain and a ubiquitin-like (UbL) domain. Thus, arrangement and location of the proteasome initiation region affect a protein’s fate and play a central role in selecting proteins for proteasome-mediated degradation.

Cold denaturation and aggregation: a comparative NMR study of titin I28 in bulk and in a confined environment

An NMR study of the thermal stability of titin I28 in the temperature range from -16 to 65 degrees C showed that this protein can undergo cold denaturation at physiological conditions. This is the second case of a protein undergoing unbiased cold denaturation. Comparison of the stability curves in buffer and in crowded conditions shows that it is possible to measure thermodynamics parameters for unfolding even when proteins aggregate at high temperature. The use of confinement in polyacrylamide gels, with the addition of polyethylene glycol, allows easy access to subzero temperatures that might enable studies of cold denaturation of many proteins.

Cytoplasmic Ig-domain proteins: cytoskeletal regulators with a role in human disease

Immunoglobulin domains are found in a wide variety of functionally diverse transmembrane proteins, and also in a smaller number of cytoplasmic proteins. Members of this latter group are usually associated with the actin cytoskeleton, and most of them bind directly to either actin or myosin, or both. Recently, studies of inherited human disorders have identified disease-causing mutations in five cytoplasmic Ig-domain proteins: myosin-binding protein C, titin, myotilin, palladin, and myopalladin. Together with results obtained from cultured cells and mouse models, these clinical studies have yielded novel insights into the unexpected roles of Ig domain proteins in mechanotransduction and signaling to the nucleus. An emerging theme in this field is that cytoskeleton-associated Ig domain proteins are more than structural elements of the cell, and may have evolved to fill different needs in different cellular compartments. Cell Motil. Cytoskeleton 2009. (c) 2009 Wiley-Liss, Inc.

Contribution of the myosin binding protein C motif to functional effects in permeabilized rat trabeculae

Myosin binding protein C (MyBP-C) is a thick-filament protein that limits cross-bridge cycling rates and reduces myocyte power output. To investigate mechanisms by which MyBP-C affects contraction, we assessed effects of recombinant N-terminal domains of cardiac MyBP-C (cMyBP-C) on contractile properties of permeabilized rat cardiac trabeculae. Here, we show that N-terminal fragments of cMyBP-C that contained the first three immunoglobulin domains of cMyBP-C (i.e., C0, C1, and C2) plus the unique linker sequence termed the MyBP-C "motif" or "m-domain" increased Ca(2+) sensitivity of tension and increased rates of tension redevelopment (i.e., k(tr)) at submaximal levels of Ca(2+). At concentrations > or =20 microM, recombinant proteins also activated force in the absence of Ca(2+) and inhibited maximum Ca(2+)-activated force. Recombinant proteins that lacked the combination of C1 and the motif did not affect contractile properties. These results suggest that the C1 domain plus the motif constitute a functional unit of MyBP-C that can activate the thin filament.

Model for stretching and unfolding the giant multidomain muscle protein using single-molecule force spectroscopy

Single-molecule manipulation has allowed the forced unfolding of multidomain proteins. Here we outline a theory that not only explains these experiments but also points out a number of difficulties in their interpretation and makes suggestions for further experiments. For titin we reproduce force-extension curves, the dependence of break force on pulling speed, and break-force distributions and also validate two common experimental views: Unfolding titin Ig domains can be explained as stepwise increases in contour length, and increasing force peaks in native Ig sequences represent a hierarchy of bond strengths. Our theory is valid for essentially any molecule that can be unfolded in atomic force microscopy; as a further example, we present force-extension curves for the unfolding of RNA hairpins.

Salt-induced changes in pork myofibrillar tissue investigated by FT-IR microspectroscopy and light microscopy

FT-IR microspectroscopy and light microscopy were used to investigate pork muscle musculus semitendinosus samples, taken from three animals, that were subjected to brine salting at different concentrations (0.9, 3, 6, and 9% NaCl). Differences in spectral characteristics and in microstructure were observed in meat from animals differing in initial pH and varying salt concentrations. The FT-IR data displayed changes in the amide I region from 1700 to 1600 cm(-1). This spectral range was analyzed by principal component analysis (PCA) and partial least-squares regression (PLSR). These methods revealed correlations between the spectral data and the different animals, salt content, moisture content, pH value, and myofiber diameter. A shrinking share of alpha-helical components was related to an increase in salt concentration in the muscle. At the same time, a greater share in nonhydrogenated C=O groups (1668 cm(-1)) was related to an increase in salt concentration in the meat. The share of aggregated beta-strands differed with respect to the different animals but was not influenced by salt concentration. The meat at higher pHs (>6) had less aggregated beta-strands than that at lower pHs (5.6-5.7). It could be demonstrated that simultaneous with changes in microstructure, pH value, salt, and moisture content were alterations in the protein amide I region as measured by FT-IR microspectroscopy, revealing a relationship between these biophysical and chemical parameters and secondary protein structure attributes.

The structural principles of multidomain organization of the giant polypeptide chain of the muscle titin protein: SAXS/WAXS studies during the stretching of oriented titin fibres

Elasticity of titin is a key parameter that determines the mechanical properties of muscle. These include reversibility, i.e., the muscle's capacity to change its length many-fold and return to its original state, and the transduction of passive tension generated by the stretched muscle. The morphology and elastic properties of oriented fibres of titin molecules were studied using SAXS and WAXS (small- and wide-angle X-ray scattering, respectively) and mechanical techniques. We succeeded in obtaining oriented filaments of purified titin suitable for diffraction measurements. Our X-ray data suggest a model of titin as a nanoscale, morphological, and aperiodical array of rigid Ig- and Fn3-type domains covalently connected by conformationally variable short loops. The line group symmetry of the model can be defined as SM with axial translation tau(infinity). Both tension transduction and high elasticity of titin can be explained in terms of crystalline polymer physics. Titin stretching experiments show that each individual titin macromolecule can adopt a novel two-phase state within the fibre. Conversion between high elasticity and strength can be explained as a phase transition under external tension. In the terms of the concept of orientational melting the origin of the functional heterogeneity along the titin strand becomes interpretable.

The role of unstructured extensions in the rotational diffusion properties of a globular protein: the example of the titin i27 module

The possibility of predicting the overall shape of a macromolecule in solution from its diffusional properties has gained increasing importance in the structural genomic era. Here we explore and quantify the influence that unstructured and flexible regions have on the motions of a globular protein, a situation that can occur from the presence of such regions in the natural sequence or from additional tags. I27, an immunoglobulin-like module from the muscle protein titin, whose structure and properties are well characterized, was selected for our studies. The backbone dynamics and the overall tumbling of three different constructs of I27 were investigated using (15)N NMR relaxation collected at two (15)N frequencies (60.8 and 81.1 MHz) and fluorescence depolarization spectroscopy after labeling of a reactive cysteine with an extrinsic fluorophore. Our data show that the presence of disordered tags clearly exerts a frictional drag that increases with the length of the tags, thus affecting the module tumbling in solution. We discuss the use and the limitations of current approaches to hydrodynamic calculations, especially when having to take into account local flexibility.

A Natively Unfolded Toxin Domain Uses Its Receptor as a Folding Template

Natively unfolded proteins range from molten globules to disordered coils. They are abundant in eukaryotic genomes and commonly involved in molecular interactions. The essential N-terminal translocation domains of colicin toxins from Escherichia coli are disordered bacterial proteins that bind at least one protein of the Tol or Ton family. The colicin N translocation domain (ColN-(1-90)), which binds to the C-terminal domain of TolA (TolA-(296-421)), shows a disordered far-UV CD spectrum, no near-UV CD signal, and non-cooperative thermal unfolding. As expected, TolA-(296-421) displays both secondary structure in far-UV CD and tertiary structure in near-UV CD. Furthermore it shows a cooperative unfolding transition at 65 degrees C. CD spectra of the 1:1 complex show both increased secondary structure and colicin N-specific near-UV CD signals. A new cooperative thermal transition at 35 degrees C is followed by the unchanged unfolding behavior of TolA-(296-421). Fluorescence and surface plasmon resonance confirm that the new unfolding transition accompanies dissociation of ColN-(1-90). Hence upon binding the disordered structure of ColN-(1-90) converts to a cooperatively folded domain without altering the TolA-(296-421) structure.

Protein stability in nanocages: a novel approach for influencing protein stability by molecular confinement

Confinement of a protein in a small inert space and microviscosity are known to increase its thermodynamic stability in a way similar to the mechanisms that stabilize protein fold in the cell. Here, to examine the influence of confinement on protein stability we choose four test cases of single domain proteins characterized by a wide range of melting temperatures, from approximately 73 degrees C of titin I27 to approximately 36 degrees C of yeast frataxin. All proteins are stabilized when confined in the gel, the most dramatic stabilization being that of yeast frataxin, whose melting temperature increased by almost 5 degrees C in the gel. In addition to being simple to use, this approach allows us to change the viscosity of the solvent without changing its composition or altering the structure of the proteins. The dimensions of the pores of the gels fall in the nanometer range, hence they are similar to those of the chaperone cavity. This method could therefore be used as a novel and powerful approach for protein folding studies.

Stretching and visualizing titin molecules: combining structure, dynamics and mechanics

The details of the global and local structure and function of titin, a giant filamentous intrasarcomeric protein are largely undiscovered. Here we discuss a combination of bulk-solution and novel single-molecule techniques that may lend unique insights into titin's molecular dynamic, structural and mechanical characteristics.

Structure, stability and dynamics of the central domain of cardiac myosin binding protein C (MyBP-C): implications for multidomain assembly and causes for cardiomyopathy

The large multidomain muscle protein myosin binding protein C (MyBP-C) has been implicated for some time in cardiac disease while until recently little was known about its structure and function. Here we present a detailed study of the central domain C5 of the cardiac isoform of MyBP-C. This domain is unusual in several aspects. Firstly it contains two sizeable insertions compared to the non-cardiac isoforms. The first insertion comprises the linker between domains cC4 and cC5 that is elongated by ten amino acid residues, the second insertion comprises an elongation of the CD-loop in the middle of the domain by approximately 30 amino acid residues. Secondly two point mutations linked to familial hypertrophic cardiomyopathy (FHC) have been identified in this domain. This work shows that the general fold of cC5 is in agreement with the IgI family of beta-sandwich structures. The long cardiac-specific linker between cC4 and cC5 is not a linker at all but an integral part of the fold of cC5, as evidenced by an unfolded mutant in which this segment was removed. The second insertion is shown to be unstructured, highly dynamic and mostly extended according to NMR relaxation measurements and analytical ultracentrifugation. The loss of several key interactions conserved in the CD-loop of the IgI fold is assumed to be responsible for the low stability of cC5 compared to other IgI domains from titin and MyBP-C itself. The low thermodynamic stability of cC5 is most evident in one of the two FHC-linked mutations, N755K (Asn115 in this construct) which is mainly unfolded with a small proportion of a native-like folded species. In contrast, the second FHC-linked mutation, R654H (Arg14 in this construct) is as well folded and stable as the wild-type. This residue is located in the extended beta-bulge at the N terminus of the protein, pointing towards the surface of the CFGA' beta-sheet. This position is in agreement with recent data pointing to a function of Arg654 in an intermolecular interaction with MyBP-C domain cC8.

Expression of proteins using the third domain of the Escherichia coli periplasmic-protein TolA as a fusion partner

The third domain of the periplasmic protein TolA from Escherichia coli (TolAIII) was used as a fusion partner in the expression of various proteins from bacteria and eukaryotes. TolAIII is small domain, expressed in high yields as a soluble protein in the cytoplasm of E. coli. Proteins were linked to the C-terminus of TolAIII by a short flexible linker containing sites for endopeptidases. Three different vectors were prepared, containing sites for enterokinase, thrombin or factor Xa. Fusion proteins also contain a His(6)-Ser(2) tag at their N-terminus for easier purification. Up to 90 mg fusion protein per liter bacterial culture was obtained using these vectors. Colicin N R-domain was expressed with this system as a fusion and processed further for functional studies. The yield of final pure R-domain was doubled as compared to the direct expression. The system may prove to be useful in the preparation of other peptides and proteins.

Sarcomeric visco-elasticity of chemically skinned skeletal muscle fibres of the rabbit at rest

The giant muscle protein titin (connectin), contained in the gap filament that connect a thick filament to the Z-line in a sarcomere, is generally considered to be responsible for the passive force (tension) and visco-elasticity in resting striated muscle. However, whether it can account for all the features of the resting tension response remains unclear. In this paper, we examine the basic features of the 'sarcomeric visco-elasticity' in a single resting mammalian muscle fibre and attempt to account for various tension components on the basis of known structural features of a sarcomere. At sarcomere length of approximately 2.6 microm, the force response to a ramp stretch of 2-5% is complex but can be resolved into four functionally different components. The behaviour displayed by the components ranges from pure viscous type (directly proportional to stretch velocity, ranging from 0.1 to 30 lengths s(-1)) to predominantly elastic type (insensitive to stretch velocity at 1-2 s time scale); simulations show two components of visco-elasticity with characteristically different relaxation times. The velocity-sensitive components (only) are enhanced by filament lattice compression (dextran - 500 kD) and by increased medium viscosity (dextran - 12 kD); also, the relaxation time of visco-elasticity is longer with increased medium viscosity. Amplitude of all the components and the relaxation time of visco-elasticity are increased at longer sarcomere length (range approximately 2.5 - 3.0 microm). The study, and quantitative analyses, extend our previous work on intact muscle fibres and suggest that the velocity-sensitive tension components in intact sarcomere arise from interactions between sarcomeric filaments, filament segments and inter-filamentary medium; the two components of visco-elasticity arise from distinct regions of titin (connectin) molecules.

High level expression of His-tagged colicin pore-forming domains and reflections on the sites for pore formation in the inner membrane

There exists ample evidence for the assumption that pore-forming colicins cannot exert their toxicity within the producing cell and that they must gain access to the outer face of the cytoplasmic membrane to achieve this. We wished to construct pET-vectors to produce pore-forming domains of colicin A and N with N-terminal hexa-histidine tags under the control of a T7 promoter. This was only possible when the correct immunity protein was also present. Hence it appears that this system exhibits the peculiarity that there is a toxicity associated with the over produced pore-forming domain. However, when the ratio of colicin to immunity protein is compared it is still clear that direct insertion into the cytoplasmic membrane does not occur and that membrane translocation of the colicin at limited sites may be occurring. This article reviews previous literature on the subject in terms of a model for limited sites of colicin action.

Titin; a multidomain protein that behaves as the sum of its parts

Titin is a giant, multidomain muscle protein forming a major component of the sarcomere in vertebrate striated muscle. As for many other multidomain proteins, the properties of titin are often studied by characterisation of the constituent domains in isolation. This raises the question of to what extent the properties of the isolated domains are representative of the domains in the wild-type protein. We address this question for the I-band region of titin, which is of particular biological interest due to its role in muscle elasticity, by determining the properties of five immunoglobulin domains from the I-band in three different contexts; firstly as isolated domains with the boundaries defined conservatively, secondly, with a two amino acid extension at both the N and C terminus and thirdly as part of multidomain constructs. We show that adjacent domains in the titin I-band have very different kinetic properties which, in general, undergo only a small change in the presence of neighbouring domains and conclude that, provided that care is taken in the choice of domain boundaries, the properties of the titin I-band are essentially "the sum of its parts". From this and other work we propose that variation in kinetic properties between adjacent domains may be a general property of the I-band thereby preventing misfolding events on muscle relaxation.

Titin-actin interaction in mouse myocardium: passive tension modulation and its regulation by calcium/S100A1

Passive tension in striated muscles derives primarily from the extension of the giant protein titin. However, several studies have suggested that, in cardiac muscle, interactions between titin and actin might also contribute to passive tension. We expressed recombinant fragments representing the subdomains of the extensible region of cardiac N2B titin (tandem-Ig segments, the N2B splice element, and the PEVK domain), and assayed them for binding to F-actin. The PEVK fragment bound F-actin, but no binding was detected for the other fragments. Comparison with a skeletal muscle PEVK fragment revealed that only the cardiac PEVK binds actin at physiological ionic strengths. The significance of PEVK-actin interaction was investigated using in vitro motility and single-myocyte mechanics. As F-actin slid relative to titin in the motility assay, a dynamic interaction between the PEVK domain and F-actin retarded filament sliding. Myocyte results suggest that a similar interaction makes a significant contribution to the passive tension. We also investigated the effect of calcium on PEVK-actin interaction. Although calcium alone had no effect, S100A1, a soluble calcium-binding protein found at high concentrations in the myocardium, inhibited PEVK-actin interaction in a calcium-dependent manner. Gel overlay analysis revealed that S100A1 bound the PEVK region in vitro in a calcium-dependent manner, and S100A1 binding was observed at several sites along titin's extensible region in situ, including the PEVK domain. In vitro motility results indicate that S100A1-PEVK interaction reduces the force that arises as F-actin slides relative to the PEVK domain, and we speculate that S100A1 may provide a mechanism to free the thin filament from titin and reduce titin-based tension before active contraction.

Stability and folding rates of domains spanning the large A-band super-repeat of titin

Titin is a very large (>3 MDa) protein found in striated muscle where it is believed to participate in myogenesis and passive tension. A prominent feature in the A-band portion of titin is the presence of an 11-domain super-repeat of immunoglobulin superfamily and fibronectin-type-III-like domains. Seven overlapping constructs from human cardiac titin, each consisting of two or three domains and together spanning the entire 11-domain super-repeat, have been expressed in Escherichia coli. Fluorescence unfolding experiments and circular dichroism spectroscopy have been used to measure folding stabilities for each of the constructs and to assign unfolding rates for each super-repeat domain. Immunoglobulin superfamily domains were found to fold correctly only in the presence of their C-terminal fibronectin type II domain, suggesting close and possibly rigid association between these units. The domain stabilities, which range from 8.6 to 42 kJ mol(-1) under physiological conditions, correlate with previously reported mechanical forces required to unfold titin domains. Individual domains vary greatly in their rates of unfolding, with a range of unfolding rate constants between 2.6 x 10(-6) and 1.2 s(-1). This variation in folding behavior is likely to be an important determinant in ensuring independent folding of domains in multi-domain proteins such as titin.

Modularity and homology: modelling of the titin type I modules and their interfaces

Titin is a giant muscle protein with a highly modular architecture consisting of multiple repeats of two sequence motifs, named type I and type II. Type I motifs are homologous to members of the fibronectin type 3 (Fn3) superfamily, one of the motifs most widespread in modular proteins. Fn3 domains are thought to mediate protein-protein interactions and to act as spacers. In titin, Fn3 modules are present in two different super-repeated patterns, likely to be involved in sarcomere assembly through interactions with A-band proteins. Here, we discuss results from homology modelling the whole family of Fn3 domains in titin. Homology modelling is a powerful tool that will play an increasingly important role in the post-genomic era. It is particularly useful for extending experimental structure determinations of parts of multidomain proteins that contain multiple copies of the same motif. The 3D structures of a representative titin type I domain and of other extracellular Fn3 modules were used as a template to model the structures of the 132 copies in titin. The resulting models suggest residues that contribute to the fold stability and allow us to distinguish these from residues likely to have functional importance. In particular, analysis of the models and mapping of the consensus sequence onto the 3D structure suggest putative surfaces of interaction with other proteins. From the structures of isolated modules and the pattern of conservation in the multiple alignment of the whole titin Ig and Fn3 families, it is possible to address the question of how tandem modules are assembled. Our predictions can be validated experimentally.

Flexibility and extensibility in the titin molecule: analysis of electron microscope data

Muscle elasticity derives directly from titin extensibility, which stems from three distinct types of spring-like behaviour of the I-band portion of the molecule. With progressively greater forces and sarcomere lengths, the molecule straightens and then unfolds, first in the PEVK-region and then in individual immunoglobulin domains. Here, we report quantitative analysis of flexibility and extensibility in isolated titin molecules visualized by electron microscopy. Conformations displayed by molecules dried on a substrate vary from a random coil to rod-like, demonstrating highly flexible and easily deformable tertiary structure. The particular conformation observed depends on the "wettability" of the substrate during specimen preparation: higher wettability favours coiled conformations, whereas lower wettability results in more extended molecules. Extension is shown to occur during liquid dewetting. Statistical methods of conformational analysis applied to a population of coiled molecules gave an average persistence length 13.5(+/-4.5) nm. The close correspondence of this value to an earlier one from light-scattering studies confirms that conformations observed by microscopy closely reflected the equilibrium conformation in solution. Analysis of hydrodynamic forces exerted during dewetting also indicates that the force causing straightening of the molecules and extension of the PEVK-region is in the picoNewton range, whereas unfolding of the immunoglobulin and fibronectin domains may require forces about tenfold higher. The microscope data directly illustrate the relationship between titin conformation and the magnitude of applied force. They also suggest the presence of torsional stiffness in the molecule, which may affect considerations of elasticity.

Mapping the Folding Pathway of an Immunoglobulin Domain

BACKGROUND

Do proteins that have the same structure fold by the same pathway even when they are unrelated in sequence? To address this question, we are comparing the folding of a number of different immunoglobulin-like proteins. Here, we present a detailed protein engineering phi value analysis of the folding pathway of TI I27, an immunoglobulin domain from human cardiac titin.

RESULTS

TI I27 folds rapidly via a kinetic intermediate that is destabilized by most mutations. The transition state for folding is remarkably native-like in terms of solvent accessibility. We use phi value analysis to map this transition state and show that it is highly structured; only a few residues close to the N-terminal region of the protein remain completely unfolded. Interestingly, most mutations cause the transition state to become less native-like. This anti-Hammond behavior can be used as a novel means of obtaining additional structural information about the transition state.

CONCLUSIONS

The residues that are involved in nucleating the folding of TI I27 are structurally equivalent to the residues that form the folding nucleus in an evolutionary unrelated fibronectin type III protein. These residues form part of the common structural core of Ig-like domains. The data support the hypothesis that interactions essential for defining the structure of these beta sandwich proteins are also important in nucleation of folding.

Modular motif, structural folds and affinity profiles of the PEVK segment of human fetal skeletal muscle titin

The extension of the PEVK segment of the giant elastic protein titin is a key event in the elastic response of striated muscle to passive stretch. PEVK behaves mechanically as an entropic spring and is thought to be a random coil. cDNA sequencing of human fetal skeletal PEVK reveals a modular motif with tandem repeats of modules averaging 28 residues and with superrepeats of seven modules. Conformational studies of bacterially expressed 53-kDa fragment (TP1) by circular dichroism suggest that this soluble protein contains substantial polyproline II (PPII) type left-handed helices. Urea and thermal titrations cause gradual and reversible decrease in PPII content. The absence of sharp melting in urea and thermal titrations suggests that there is no long range cooperativity among the PPII helices. Studies with solid phase and surface plasmon resonance assays indicate that TP1 interacts with actin and some but not all cloned nebulin fragments with high affinity. Interestingly, Ca(2+)/calmodulin and Ca(2+)/S100 abolish nebulin/PEVK interaction. We suggest that in aqueous solution, PEVK is an open and flexible chain of relatively stable structural folds of the polyproline II type. PEVK region of titin may be involved in interfilament association with thin filaments in a calcium/calmodulin-sensitive manner. This adhesion may modulate titin extensibility and elasticity.

Mechanical design of proteins studied by single-molecule force spectroscopy and protein engineering

Mechanical unfolding and refolding may regulate the molecular elasticity of modular proteins with mechanical functions. The development of the atomic force microscopy (AFM) has recently enabled the dynamic measurement of these processes at the single-molecule level. Protein engineering techniques allow the construction of homomeric polyproteins for the precise analysis of the mechanical unfolding of single domains. alpha-Helical domains are mechanically compliant, whereas beta-sandwich domains, particularly those that resist unfolding with backbone hydrogen bonds between strands perpendicular to the applied force, are more stable and appear frequently in proteins subject to mechanical forces. The mechanical stability of a domain seems to be determined by its hydrogen bonding pattern and is correlated with its kinetic stability rather than its thermodynamic stability. Force spectroscopy using AFM promises to elucidate the dynamic mechanical properties of a wide variety of proteins at the single molecule level and provide an important complement to other structural and dynamic techniques (e.g., X-ray crystallography, NMR spectroscopy, patch-clamp).

Mechanical design of proteins studied by single-molecule force spectroscopy and protein engineering

Mechanical unfolding and refolding may regulate the molecular elasticity of modular proteins with mechanical functions. The development of the atomic force microscopy (AFM) has recently enabled the dynamic measurement of these processes at the single-molecule level. Protein engineering techniques allow the construction of homomeric polyproteins for the precise analysis of the mechanical unfolding of single domains. alpha-Helical domains are mechanically compliant, whereas beta-sandwich domains, particularly those that resist unfolding with backbone hydrogen bonds between strands perpendicular to the applied force, are more stable and appear frequently in proteins subject to mechanical forces. The mechanical stability of a domain seems to be determined by its hydrogen bonding pattern and is correlated with its kinetic stability rather than its thermodynamic stability. Force spectroscopy using AFM promises to elucidate the dynamic mechanical properties of a wide variety of proteins at the single molecule level and provide an important complement to other structural and dynamic techniques (e.g., X-ray crystallography, NMR spectroscopy, patch-clamp).

I-band titin in cardiac muscle is a three-element molecular spring and is critical for maintaining thin filament structure

In cardiac muscle, the giant protein titin exists in different length isoforms expressed in the molecule's I-band region. Both isoforms, termed N2-A and N2-B, comprise stretches of Ig-like modules separated by the PEVK domain. Central I-band titin also contains isoform-specific Ig-motifs and nonmodular sequences, notably a longer insertion in N2-B. We investigated the elastic behavior of the I-band isoforms by using single-myofibril mechanics, immunofluorescence microscopy, and immunoelectron microscopy of rabbit cardiac sarcomeres stained with sequence-assigned antibodies. Moreover, we overexpressed constructs from the N2-B region in chick cardiac cells to search for possible structural properties of this cardiac-specific segment. We found that cardiac titin contains three distinct elastic elements: poly-Ig regions, the PEVK domain, and the N2-B sequence insertion, which extends approximately 60 nm at high physiological stretch. Recruitment of all three elements allows cardiac titin to extend fully reversibly at physiological sarcomere lengths, without the need to unfold Ig domains. Overexpressing the entire N2-B region or its NH(2) terminus in cardiac myocytes greatly disrupted thin filament, but not thick filament structure. Our results strongly suggest that the NH(2)-terminal N2-B domains are necessary to stabilize thin filament integrity. N2-B-titin emerges as a unique region critical for both reversible extensibility and structural maintenance of cardiac myofibrils.

Stretching single-domain proteins: phase diagram and kinetics of force-induced unfolding

Single-molecule force spectroscopy reveals unfolding of domains in titin on stretching. We provide a theoretical framework for these experiments by computing the phase diagrams for force-induced unfolding of single-domain proteins using lattice models. The results show that two-state folders (at zero force) unravel cooperatively, whereas stretching of non-two-state folders occurs through intermediates. The stretching rates of individual molecules show great variations reflecting the heterogeneity of force-induced unfolding pathways. The approach to the stretched state occurs in a stepwise "quantized" manner. Unfolding dynamics and forces required to stretch proteins depend sensitively on topology. The unfolding rates increase exponentially with force f till an optimum value, which is determined by the barrier to unfolding when f = 0. A mapping of these results to proteins shows qualitative agreement with force-induced unfolding of Ig-like domains in titin. We show that single-molecule force spectroscopy can be used to map the folding free energy landscape of proteins in the absence of denaturants.

M band proteins myomesin and skelemin are encoded by the same gene: analysis of its organization and expression

The complete exon-intron organization of the murine gene encoding sarcomeric myomesin has been determined. The gene is composed of 38 exons and 37 introns, spanning approximately 105 kb of DNA. Intron positions and phases are essentially identical to those identified in M-protein. They are related to the modular structure of myomesin, which is composed almost entirely of immunoglobulin and fibronectin type III domains. Nearly all repeats follow a two exon-one domain structure. The start and end of each domain are defined by introns in phase I, while internal introns are more divergent in position and very rarely use phase I. Genomic Southern blotting and reverse transcription-polymerase chain reaction revealed that differential splicing of a single exon gives rise to two polypeptides, described in the literature as myomesin and skelemin, respectively. A single transcriptional start point was detected in both skeletal and cardiac muscle. Analysis of the presumptive promoter region revealed several potential regulatory elements. CAT expression assays using promoter deletion constructs identified three regions that seem to be important for the muscle-specific transcriptional activation of the myomesin gene. These results provide the basis for a comparative analysis of the regulation of myomesin and M-protein genes in vivo.

The assembly of immunoglobulin-like modules in titin: implications for muscle elasticity

Titin, a giant muscle protein, forms filaments that span half of the sarcomere and cover, along their length, quite diversified functions. The region of titin located in the sarcomere I-band is believed to play a major rôle in extensibility and passive elasticity of muscle. In the I-band, the titin sequence contains tandem immunoglobulin-like (Ig) modules intercalated by a potentially non-globular region. By a combined approach making use of small angle X-ray scattering and nuclear magnetic resonance techniques, we have addressed the questions of what are the average mutual orientation of poly-Igs and the degree of flexibility around the domain interfaces. Various recombinant fragments containing one, two and four titin I-band tandem domains were analysed. The small-angle scattering data provide a picture of the domains in a mostly extended configuration with their long axes aligned head-to-tail. There is a small degree of bending and twisting of the modules with respect to each other that results in an overall shortening in their maximum linear dimension compared with that expected for the fully extended, linear configurations. This shortening is greatest for the four module construct ( approximately 15%). 15N NMR relaxation studies of one and two-domain constructs show that the motions around the interdomain connecting regions are restricted, suggesting that titin behaves as a row of beads connected by rigid hinges. The length of the residues in the interface seems to be the major determinant of the degree of flexibility. Possible implications of our results for the structure and function of titin in muscles are discussed.

The three-dimensional structure of a type I module from titin: a prototype of intracellular fibronectin type III domains

BACKGROUND

Titin is a huge protein ( approximately 3 MDa) that is present in the contractile unit (sarcomere) of striated muscle and has a key role in muscle assembly and elasticity. Titin is mainly composed of two types of module (type I and II). Type I modules are found exclusively in the region of titin localised in the A band, where they are arranged in a super-repeat pattern that correlates with the ultrastructure of the thick filament. No structure of a titin type I module has been reported so far.

RESULTS

We have determined the structure of a representative type I module, A71, using nuclear magnetic resonance (NMR) spectroscopy. The structure has the predicted fibronectin type III fold. Titin-specific conserved residues are either located at the putative module-module interfaces or along one side of the protein surface. Several proline residues that contribute to two stretches in a polyproline II helix conformation are solvent-exposed and line up as a continuous ribbon extending over more than two-thirds of the module surface. Homology models of the type I module N-terminal to A71 (A70) and the double module A70-A71 were used to discuss possible intermodule interactions and their role in module-module orientation.

CONCLUSIONS

As residues at the module-module interfaces are highly conserved, we speculate that similar interactions govern all of the interfaces between type I modules in titin. This conservation would lead to a regular multiple array of similar surface structures. Such an arrangement would allow arrays of contiguous type I modules to expose multiple proline stretches in a highly regular way and these may act as binding sites for other thick filament proteins.

Unfolding of titin immunoglobulin domains by steered molecular dynamics simulation

Titin, a 1-microm-long protein found in striated muscle myofibrils, possesses unique elastic and extensibility properties in its I-band region, which is largely composed of a PEVK region (70% proline, glutamic acid, valine, and lysine residue) and seven-strand beta-sandwich immunoglobulin-like (Ig) domains. The behavior of titin as a multistage entropic spring has been shown in atomic force microscope and optical tweezer experiments to partially depend on the reversible unfolding of individual Ig domains. We performed steered molecular dynamics simulations to stretch single titin Ig domains in solution with pulling speeds of 0.5 and 1.0 A/ps. Resulting force-extension profiles exhibit a single dominant peak for each Ig domain unfolding, consistent with the experimentally observed sequential, as opposed to concerted, unfolding of Ig domains under external stretching forces. This force peak can be attributed to an initial burst of backbone hydrogen bonds, which takes place between antiparallel beta-strands A and B and between parallel beta-strands A' and G. Additional features of the simulations, including the position of the force peak and relative unfolding resistance of different Ig domains, can be related to experimental observations.

Conformational stability studies of the pleckstrin DEP domain: definition of the domain boundaries

Pleckstrin is the major substrate of protein kinase C in platelets. It contains at its N- and C-termini two pleckstrin homology (PH) domains which have been proposed to mediate protein-protein and protein-lipid interactions. A new module, called DEP, has recently been identified by sequence analysis in the central region of pleckstrin. In order to study this module, several recombinant polypeptides corresponding to the DEP module and N- and C-termini extended forms have been expressed. Using circular dichroism (CD) and nuclear magnetic resonance (NMR) techniques, the domain boundaries have been determined that yield a soluble and folded pleckstrin DEP domain. This comprises 93 amino acids with an alpha/beta fold in agreement with secondary structure predictions. Stability studies indicate that the regions surrounding the DEP domain do not contribute to its stability suggesting that the phosphorylation sites at S113, T114 and S117 are in an unstructured region. Identification of the regions of pleckstrin that are folded shall facilitate determination of its structure and function.

Discovery of critical Tol A-binding residues in the bactericidal toxin colicin N: a biophysical approach

Colicins translocate across the Escherichia coli outer membrane and periplasm by interacting with several receptors. After first binding to outer membrane surface receptors via their central region, they interact with TolA or TonB proteins via their N-terminal regions. Finally, the toxic C-terminal region is inserted into or across the cytoplasmic membrane. We have measured the binding of colicin N to TolA by isothermal titration microcalorimetry (ITC) and tryptophan fluorescence. The isolated N-terminal domain exhibits a higher affinity for TolA (Kd = 1 microM) than does the whole colicin (18 microM), and similar behaviour has been observed when the N-terminal domain of the g3p protein of the bacteriophage fd, which also binds TolA, is examined in isolation and in situ. This may indicate a similar mechanism in which a cryptic TolA binding site is revealed after primary receptor binding. The isolated colicin N N-terminal domain appears to be unstructured in circular dichroism and fluorescence studies. We have used mutagenesis and ITC to characterize the TolA binding site and have shown it to be of a different sequence and much further from the N-terminus than previously thought.

Structure and expression of the gene encoding murine M-protein, a sarcomere-specific member of the immunoglobulin superfamily

The complete exon-intron organization of the murine gene encoding M-protein, a structural protein of sarcomeric myofibrils, was determined. The gene is composed of 37 exons and 36 introns, spanning approximately 75 kb of DNA. Intron positions are related to the modular structure of M-protein, which is composed essentially of immunoglobulin and fibronectin type III domains. Almost all repeats follow a two exon-one domain structure. The beginning and end of each domain are defined by introns in phase I; internal introns are more divergent in position and very rarely use phase I. A single transcriptional start point was detected in both skeletal and cardiac muscle. Analysis of the prospective promoter region revealed several potential regulatory elements. CAT expression assays using promoter deletion constructs identified three regions that seem to be most important for the muscle-specific transcription activation of the M-protein gene. These results provide the first complete characterization of a gene for a member of the intracellular branch of the immunoglobulin superfamily.

Folding and stability of a fibronectin type III domain of human tenascin

The folding of an isolated fibronectin type III domain of human tenascin, a large extra-cellular matrix protein, has been characterised. The isolated module, which has no disulphide bonds, can be reversibly unfolded by chemical denaturant and temperature. Equilibrium unfolding, measured using a number of different probes, fits to a two-state transition, with consistent measures of DeltaGH2OD-N. Folding and refolding rate constants have been determined over a range of denaturant concentrations. The refolding kinetics are bi-phasic, and in the transition region the slow phase dominates refolding kinetics. Outside the transition region the folding of the fast-folding species fits to a two-state model. There is no evidence for significant accumulation of partially folded intermediates.

Elasticity and unfolding of single molecules of the giant muscle protein titin

The giant muscle protein titin, also called connectin, is responsible for the elasticity of relaxed striated muscle, as well as acting as the molecular scaffold for thick-filament formation. The titin molecule consists largely of tandem domains of the immunoglobulin and fibronectin-III types, together with specialized binding regions and a putative elastic region, the PEVK domain. We have done mechanical experiments on single molecules of titin to determine their visco-elastic properties, using an optical-tweezers technique. On a fast (0.1s) timescale titin is elastic and force-extension data can be fitted with standard random-coil polymer models, showing that there are two main sources of elasticity: one deriving from the entropy of straightening the molecule; the other consistent with extension of the polypeptide chain in the PEVK region. On a slower timescale and above a certain force threshold, the molecule displays stress-relaxation, which occurs in rapid steps of a few piconewtons, corresponding to yielding of internal structures by about 20 nm. This stress-relaxation probably derives from unfolding of immunoglobulin and fibronectin domains.