Effects of multiple ligand binding on kinetic isotope effects in PQQ-dependent methanol dehydrogenase

Understanding the chemistry of the artificial electron acceptors PES, PMS, DCPIP and Wurster's Blue in methanol dehydrogenase assays

Methanol dehydrogenases (MDH) have recently taken the spotlight with the discovery that a large portion of these enzymes in nature utilize lanthanides in their active sites. The kinetic parameters of these enzymes are determined with a spectrophotometric assay first described by Anthony and Zatman 55 years ago. This artificial assay uses alkylated phenazines, such as phenazine ethosulfate (PES) or phenazine methosulfate (PMS), as primary electron acceptors (EAs) and the electron transfer is further coupled to a dye. However, many groups have reported problems concerning the bleaching of the assay mixture in the absence of MDH and the reproducibility of those assays. Hence, the comparison of kinetic data among MDH enzymes of different species is often cumbersome. Using mass spectrometry, UV-Vis and electron paramagnetic resonance (EPR) spectroscopy, we show that the side reactions of the assay mixture are mainly due to the degradation of assay components. Light-induced demethylation (yielding formaldehyde and phenazine in the case of PMS) or oxidation of PES or PMS as well as a reaction with assay components (ammonia, cyanide) can occur. We suggest here a protocol to avoid these side reactions. Further, we describe a modified synthesis protocol for obtaining the alternative electron acceptor, Wurster's blue (WB), which serves both as EA and dye. The investigation of two lanthanide-dependent methanol dehydrogenases from Methylorubrum extorquens AM1 and Methylacidiphilum fumariolicum SolV with WB, along with handling recommendations, is presented. Lanthanide-dependent methanol dehydrogenases. Understanding the chemistry of artificial electron acceptors and redox dyes can yield more reproducible results.

Impact of the lanthanide contraction on the activity of a lanthanide-dependent methanol dehydrogenase - a kinetic and DFT study

Interest in the bioinorganic chemistry of lanthanides is growing rapidly as more and more lanthanide-dependent bacteria are being discovered. Especially the earlier lanthanides have been shown to be preferentially utilized by bacteria that need these Lewis acids as cofactors in their alcohol dehydrogenase enzymes. Here, we investigate the impact of the lanthanide ions lanthanum(iii) to lutetium(iii) (excluding Pm) on the catalytic parameters (vmax, KM, kcat/KM) of a methanol dehydrogenase (MDH) isolated from Methylacidiphilum fumariolicum SolV. Kinetic experiments and DFT calculations were used to discuss why only the earlier lanthanides (La-Gd) promote high MDH activity. Impact of Lewis acidity, coordination number preferences, stability constants and other properties that are a direct result of the lanthanide contraction are discussed in light of the two proposed mechanisms for MDH.

Similar but Not the Same: First Kinetic and Structural Analyses of a Methanol Dehydrogenase Containing a Europium Ion in the Active Site

Since the discovery of the biological relevance of rare earth elements (REEs) for numerous different bacteria, questions concerning the advantages of REEs in the active sites of methanol dehydrogenases (MDHs) over calcium(II) and of why bacteria prefer light REEs have been a subject of debate. Here we report the cultivation and purification of the strictly REE-dependent methanotrophic bacterium Methylacidiphilum fumariolicum SolV with europium(III), as well as structural and kinetic analyses of the first methanol dehydrogenase incorporating Eu in the active site. Crystal structure determination of the Eu-MDH demonstrated that overall no major structural changes were induced by conversion to this REE. Circular dichroism (CD) measurements were used to determine optimal conditions for kinetic assays, whereas inductively coupled plasma mass spectrometry (ICP-MS) showed 70 % incorporation of Eu in the enzyme. Our studies explain why bacterial growth of SolV in the presence of Eu3+ is significantly slower than in the presence of La3+ /Ce3+ /Pr3+ : Eu-MDH possesses a decreased catalytic efficiency. Although REEs have similar properties, the differences in ionic radii and coordination numbers across the series significantly impact MDH efficiency.

Effect of amines as activators on the alcohol-oxidizing activity of pyrroloquinoline quinone-dependent quinoprotein alcohol dehydrogenase

Pyrroloquinoline quinone-dependent quinoprotein alcohol dehydrogenases (PQQ-ADH) require ammonia or primary amines as activators in in vitro assays with artificial electron acceptors. We found that PQQ-ADH from Pseudomonas putida KT2440 (PpADH) was activated by various primary amines, di-methylamine, and tri-methylamine. The alcohol oxidation activity of PpADH was strongly enhanced and the affinity for substrates was also improved by pentylamine as an activator.

Rare earth metals are essential for methanotrophic life in volcanic mudpots

Growth of Methylacidiphilum fumariolicum SolV, an extremely acidophilic methanotrophic microbe isolated from an Italian volcanic mudpot, is shown to be strictly dependent on the presence of lanthanides, a group of rare earth elements (REEs) such as lanthanum (Ln), cerium (Ce), praseodymium (Pr) and neodymium (Nd). After fractionation of the bacterial cells and crystallization of the methanol dehydrogenase (MDH), it was shown that lanthanides were essential as cofactor in a homodimeric MDH comparable with one of the MDHs of Methylobacterium extorquens AM1. We hypothesize that the lanthanides provide superior catalytic properties to pyrroloquinoline quinone (PQQ)-dependent MDH, which is a key enzyme for both methanotrophs and methylotrophs. Thus far, all isolated MxaF-type MDHs contain calcium as a catalytic cofactor. The gene encoding the MDH of strain SolV was identified to be a xoxF-ortholog, phylogenetically closely related to mxaF. Analysis of the protein structure and alignment of amino acids showed potential REE-binding motifs in XoxF enzymes of many methylotrophs, suggesting that these may also be lanthanide-dependent MDHs. Our findings will have major environmental implications as metagenome studies showed (lanthanide-containing) XoxF-type MDH is much more prominent in nature than MxaF-type enzymes.

Aromatic amino acid auxotrophs constructed by recombinant marker exchange in Methylophilus methylotrophus AS1 cells expressing the aroP-encoded transporter of Escherichia coli

The isolation of auxotrophic mutants, which is a prerequisite for a substantial genetic analysis and metabolic engineering of obligate methylotrophs, remains a rather complicated task. We describe a novel method of constructing mutants of the bacterium Methylophilus methylotrophus AS1 that are auxotrophic for aromatic amino acids. The procedure begins with the Mu-driven integration of the Escherichia coli gene aroP, which encodes the common aromatic amino acid transporter, into the genome of M. methylotrophus. The resulting recombinant strain, with improved permeability to certain amino acids and their analogues, was used for mutagenesis. Mutagenesis was carried out by recombinant substitution of the target genes in the chromosome by linear DNA using the FLP-excisable marker flanked with cloned homologous arms longer than 1,000 bp. M. methylotrophus AS1 genes trpE, tyrA, pheA, and aroG were cloned in E. coli, sequenced, disrupted in vitro using a Kmr marker, and electroporated into an aroP carrier recipient strain. This approach led to the construction of a set of marker-less M. methylotrophus AS1 mutants auxotrophic for aromatic amino acids. Thus, introduction of foreign amino acid transporter genes appeared promising for the following isolation of desired auxotrophs on the basis of different methylotrophic bacteria.

Kinetic isotope effects and ligand binding in PQQ-dependent methanol dehydrogenase

The reaction of PQQ (2,7,9-tricarboxypyrroloquinoline quinone)-dependent MDH (methanol dehydrogenase) from Methylophilus methylotrophus has been studied under steady-state conditions in the presence of an alternative activator [GEE (glycine ethyl ester)] and compared with similar reactions performed with ammonium (used more generally as an activator in steady-state analysis of MDH). Studies of initial velocity with methanol (protiated methanol, C1H3O1H) and [2H]methanol (deuteriated methanol, C2H3O2H) as substrate, performed with different concentrations of GEE and PES (phenazine ethosulphate), indicate competitive binding effects for substrate and PES on the stimulation and inhibition of enzyme activity by GEE. GEE is more effective at stimulating activity than ammonium at low concentrations, suggesting tighter binding of GEE to the active site. Inhibition of activity at high GEE concentration is less pronounced than at high ammonium concentration. This suggests a close spatial relationship between the stimulatory (KS) and inhibitory (KI) binding sites in that binding of GEE to the KS site sterically impairs the binding of GEE to the KI site. The binding of GEE is also competitive with the binding of PES, and GEE is more effective than ammonium in competing with PES. This competitive binding of GEE and PES lowers the effective concentration of PES at the site competent for electron transfer. Accordingly, the oxidative half-reaction, which is second-order with respect to PES concentration, is more rate-limiting in steady-state turnover with GEE than with ammonium. The smaller methanol C-1H/C-2H kinetic isotope effects observed with GEE are consistent with a larger contribution made by the oxidative half-reaction to rate limitation. Cyanide is much less effective at suppressing 'endogenous' activity in the presence of GEE than with ammonium, which is attributed to impaired binding of cyanide to the catalytic site through steric interaction with GEE bound at the KS site. The kinetic model developed previously for reactions of MDH with ammonium [Hothi, Basran, Sutcliffe and Scrutton (2003) Biochemistry 42, 3966-3978] is consistent with data obtained with GEE, although a more detailed structural interpretation is given here. Molecular-modelling studies rationalize the kinetic observations in terms of a complex binding scenario at the molecular level involving two spatially distinct inhibitory sites (KI and KI'). The KI' site caps the entrance to the active site and is interpreted as the PES binding site. The KI site is adjacent to, and, for GEE, overlaps with, the KS site, and is located in the active-site cavity close to the PQQ cofactor and the catalytic site for methanol oxidation.

Tryptophan tryptophylquinone cofactor biogenesis in the aromatic amine dehydrogenase of Alcaligenes faecalis

The heterologous expression of tryptophan trytophylquinone (TTQ)-dependent aromatic amine dehydrogenase (AADH) has been achieved in Paracoccus denitrificans. The aauBEDA genes and orf-2 from the aromatic amine utilization (aau) gene cluster of Alcaligenes faecalis were placed under the regulatory control of the mauF promoter from P. denitrificans and introduced into P. denitrificans using a broad-host-range vector. The physical, spectroscopic and kinetic properties of the recombinant AADH were indistinguishable from those of the native enzyme isolated from A. faecalis. TTQ biogenesis in recombinant AADH is functional despite the lack of analogues in the cloned aau gene cluster for mauF, mauG, mauL, mauM and mauN that are found in the methylamine utilization (mau) gene cluster of a number of methylotrophic organisms. Steady-state reaction profiles for recombinant AADH as a function of substrate concentration differed between 'fast' (tryptamine) and 'slow' (benzylamine) substrates, owing to a lack of inhibition by benzylamine at high substrate concentrations. A deflated and temperature-dependent kinetic isotope effect indicated that C-H/C-D bond breakage is only partially rate-limiting in steady-state reactions with benzylamine. Stopped-flow studies of the reductive half-reaction of recombinant AADH with benzylamine demonstrated that the KIE is elevated over the value observed in steady-state turnover and is independent of temperature, consistent with (a) previously reported studies with native AADH and (b) breakage of the substrate C-H bond by quantum mechanical tunnelling. The limiting rate constant (k(lim)) for TTQ reduction is controlled by a single ionization with pK(a) value of 6.0, with maximum activity realized in the alkaline region. Two kinetically influential ionizations were identified in plots of k(lim)/K(d) of pK(a) values 7.1 and 9.3, again with the maximum value realized in the alkaline region. The potential origin of these kinetically influential ionizations is discussed.

Mechanisms of ammonia activation and ammonium ion inhibition of quinoprotein methanol dehydrogenase: a computational approach

The mechanism of methanol oxidation by quinoprotein methanol dehydrogenase (MDH.PQQ) in combination with methanol (MDH.PQQ.methanol) involves Glu-171--CO2(-) general base removal of the hydroxyl proton of methanol in concert with hydride equivalent transfer to the >C5=O quinone carbon of pyrroloquinoline quinone (PQQ) and rearrangement to hydroquinone (PQQH2) with release of formaldehyde. Molecular dynamics (MD) studies of the structures of MDH.PQQ.methanol in the presence of activator NH3 and inhibitor NH4(+) have been carried out. In the MD structure of MDH.PQQ.methanol.NH3, the hydrated NH3 resides at a distance of approximately 24 A away from methanol and the ortho-quinone portion of PQQ. As such, influence of NH3 on the oxidation reaction is not probable. We find that NH4(+) competes with the substrate by hydrogen-bonding to Glu-171CO2(-) such that the MDH.PQQ.methanol.NH4(+) complex is not reactive. Ammonia readily forms imines with quinone. Imines are present in solution as neutral (>C5=NH) and protonated (>C5=NH2(+)) species. MD simulations establish that the >C5=NH2(+) derivative of MDH.PQQ(NH2(+).methanol structure is unreactive because of the nonproductive means of methanol binding. The structure obtained by the MD simulations with the neutral >C5=NH imine of MDH.PQQ(NH).methanol structure is similar to the reactive MDH.PQQ.methanol complex. This active site geometry allows for catalysis of hydride equivalent transfer to the >C5=NH of PQQ(NH) by concerted Glu-171CO(2)(-) general-base removal of the H-OCH3 proton and Arg-324H+ general-acid proton transfer to the imine nitrogen. Enzyme-bound <C5(H)NH2 derivative of PQQ [PQQ(NH)] and CH(2)O product are formed.

The quinoprotein dehydrogenases for methanol and glucose

This review summarises our current understanding of two of the main types of quinoprotein dehydrogenase in which pyrroloquinoline quinone (PQQ) is the only prosthetic group. These are the soluble methanol dehydrogenase and the membrane glucose dehydrogenase (mGDH). The membrane GDH has an additional N-terminal domain by which it is tightly anchored to the membrane, and a periplasmic domain whose structure has been modelled on the X-ray structure of the alpha-subunit of MDH which contains PQQ in the active site. This review discusses their structures and mechanisms, concentrating particularly on the pathways for electron transfer from the reduced PQQ, through the protein, to their electron acceptors. In MDH, this is the specific cytochrome c(L), the electron transfer pathway probably involving the unique disulphide ring in the active site. By contrast, mGDH contains a permanently bound ubiquinone, which acts as a single electron carrier, mediating electron transfer through the protein to the membrane ubiquinone.

Hydrogen tunneling in quinoproteins

It is now widely accepted that substrate C-H bond breakage by quinoprotein enzymes occurs by quantum mechanical tunneling. This paradigm shift in the conceptual framework for these reactions away from semi-classical transition state theory (i.e., including zero-point energy but with no tunneling correction) has been driven over recent years by experimental studies of the temperature dependence of kinetic isotope effects for these reactions in the TTQ-dependent enzymes methylamine dehydrogenase and aromatic amine dehydrogenase, which produced observations also inconsistent with the simple Bell correction model of tunneling. However, these data-specifically, the strong temperature dependence of reaction rates and the variable temperature dependence of kinetic isotope effects-are consistent with other tunneling models (denoted full tunneling models) in which protein and/or substrate fluctuations generate a configuration compatible with tunneling. These models accommodate substrate/protein (environment) fluctuations required to attain a configuration with degenerate quantum states and, when necessary, motion required to increase the probability of tunneling in these states. Furthermore, tunneling mechanisms in quinoproteins are supported by computational studies employing variational transition state theory with multidimensional tunneling corrections; these studies are also discussed in this review. Potential pitfalls in analyzing the temperature dependence of kinetic isotope effects as probes of tunneling are also discussed with reference to PQQ-dependent methanol dehydrogenase.

In silico studies of the mechanism of methanol oxidation by quinoprotein methanol dehydrogenase

The mechanism of bacterial methanol dehydrogenase involves hydride equivalent transfer from substrate to the ortho-quinone PQQ to provide a C5-reduced intermediate that subsequently rearranges to the hydroquinone PQQH(2). We have studied the PQQ reduction by molecular dynamic (MD) simulations in aqueous solution. Among the five simulated structures, either Asp297 or Glu171 or both are ionized. Reasonable structures are obtained only when both carboxyl groups are ionized. This is not unexpected since the kinetic pH optimum is 9.0. In the structure of the enzyme.PQQ.HOCH(3) complex, the hydrogen bonded Glu171-CO(2)(-).H-OCH(3) is in a position to act as a general base catalyst for hydride equivalent transfer to C5 of PQQ. We thus suggest that Glu171 plays the role of general base catalyst in PQQ reduction rather than Asp297 as previously suggested. The reduction is assisted by Arg324, which hydrogen bonds to the ortho-quinone moiety of PQQ. The rearrangement of the C5-reduced intermediate to provide hydroquinone PQQH(2) is also assisted by proton abstraction by Glu171-CO(2)(-) and the continuous hydrogen bonding of Arg324 throughout the entire reaction. These features as well as the mapping of the channel for substrate and water into the active site entrance are the observations of major importance.