Investigating the Cause of the Alkaline Transition of Phytocyanins

pH and solvent H/D isotope effects on the thermodynamics and kinetics of electron transfer for electrode-immobilized native and urea-unfolded stellacyanin

The thermodynamics of Cu(II) to Cu(I) reduction and the kinetics of the electron transfer (ET) process for Rhus vernicifera stellacyanin (STC) immobilized on a decane-1-thiol coated gold electrode have been measured through cyclic voltammetry at varying pH and temperature, in the presence of urea and in D(2)O. Immobilized STC undergoes a limited conformational change that mainly results in an enhanced exposure of one or both copper binding histidines to solvent which slightly stabilizes the cupric state and increases histidine basicity. The large immobilization-induced increase in the pK(a) for the acid transition (from 4.5 to 6.3) makes this electrode-SAM-protein construct an attractive candidate as a biomolecular ET switch operating near neutral pH in molecular electronics. Such a potential interest is increased by the robustness of this interface against chemical unfolding as it undergoes only moderate changes in the reduction thermodynamics and in the ET rate in the presence of up to 8 M urea. The sensitivity of these parameters to solvent H/D isotope effects testifies to the role of protein solvation as effector of the thermodynamics and kinetics of ET.

How the local geometry of the Cu-binding site determines the thermal stability of blue copper proteins

Identifying the factors that govern the thermal resistance of cupredoxins is essential for understanding their folding and stability, and for improving our ability to design highly stable enzymes with potential biotechnological applications. Here, we show that the thermal unfolding of plastocyanins from two cyanobacteria--the mesophilic Synechocystis and the thermophilic Phormidium--is closely related to the short-range structure around the copper center. Cu K-edge X-ray absorption spectroscopy shows that the bond length between Cu and the S atom from the cysteine ligand is a key structural factor that correlates with the thermal stability of the cupredoxins in both oxidized and reduced states. These findings were confirmed by an additional study of a site-directed mutant of Phormidium plastocyanin showing a reverse effect of the redox state on the thermal stability of the protein.

Modulation of copper site properties by remote residues determines the stability of plastocyanins

The metal cofactor determines the thermal stability in cupredoxins, but how the redox state of copper modulates their melting points remains unknown. The metal coordination environment is highly conserved in cyanobacterial plastocyanins. However, the oxidised form is more stable than the reduced one in thermophilic Phormidium, but the opposite occurs in mesophilic Synechocystis. We have performed neutral amino-acid substitutions at loops of Phormidium plastocyanin far from the copper site. Notably, mutation P49G/G50P confers a redox-dependent thermal stability similar to that of the mesophilic plastocyanin. Moreover, X-ray absorption spectroscopy reveals that P49G/G50P mutation makes the electron density distribution at the oxidised copper site shift towards that of Synechocystis plastocyanin.

Alkaline transition of pseudoazurin Met16X mutant proteins: protein stability influenced by the substitution of Met16 in the second sphere coordination

Several blue copper proteins are known to change the active site structure at alkaline pH (alkaline transition). Spectroscopic studies of Met16Phe, Met16Tyr, Met16Trp, and Met16Val pseudoazurin variants were performed to investigate the second sphere role through alkaline transition. The visible electronic absorption and resonance Raman spectra of Met16Phe, Met16Tyr, and Met16Trp variants showed the increasing of axial component at pH approximately 11 like wild-type PAz. The visible electronic absorption and far-UV CD spectra of Met16Val demonstrated that the destabilization of the protein structure was triggered at pH>11. Resonance Raman (RR) spectra of PAz showed that the intensity-weighted averaged Cu-S(Cys) stretching frequency was shifted to higher frequency region at pH approximately 11. The higher frequency shift of Cu-S(Cys) bond is implied the stronger Cu-S(Cys) bond at alkaline transition pH approximately 11. The visible electronic absorption and far-UV CD spectra of Met16X PAz revealed that the Met16Val variant is denatured at pH>11, but Met16Phe, Met16Tyr, and Met16Trp mutant proteins are not denatured even at pH>11. These observations suggest that Met16 is important to maintain the protein structure through the possible weak interaction between methionine -SCH3 part and coordinated histidine imidazole moiety. The introduction of pi-pi interaction in the second coordination sphere may be contributed to the enhancement of protein structure stability.

Spectroscopic characterization of a high-potential lipo-cupredoxin found in Streptomyces coelicolor

For many streptomycetes, a distinct dependence on the "bioavailability" of copper ions for their morphological development has been reported. Analysis of the Streptomyces coelicolor genome reveals a number of gene products encoding for putative copper-binding proteins. One of these appears as an unusual copper-binding protein with a lipoprotein signal sequence and a cupredoxin-like domain harboring a putative Type-1 copper-binding motif. Cloning of this gene from S. coelicolor and subsequent heterologous expression in Escherichia coli has allowed for a thorough spectroscopic interrogation of this putative copper-binding protein. Optical and electron paramagnetic resonance spectroscopies have confirmed the presence of a "classic" Type-1 copper site with the axial ligand to the copper a methionine. Paramagnetic NMR spectroscopy on both the native Cu(II) form and Co(II)-substituted protein has yielded active-site structural information, which on comparison with that of other cupredoxin active sites reveals metal-ligand interactions most similar to the "classic" Type-1 copper site found in the amicyanin family of cupredoxins. Despite this high structural similarity, the Cu(II)/(I) midpoint potential of the S. coelicolor protein is an unprecedented +605 mV vs normal hydrogen electrode at neutral pH (amicyanin approximately +250 mV), with no active-site protonation of the N-terminal His ligand observed. Suggestions for the physiological role/function of this high-potential cupredoxin are discussed.

Thermodynamics of the alkaline transition in phytocyanins

The thermodynamics of the alkaline transition which influences the spectral and redox properties of the type 1 copper center in phytocyanins has been determined spectroscopically. The proteins investigated include Rhus vernicifera stellacyanin, cucumber basic protein and its Met89Gln variant, and umecyanin, the stellacyanin from horseradish roots, along with its Gln95Met variant. The changes in reaction enthalpy and entropy within the protein series show partial compensatory behavior. Thus, the reaction free energy change (hence the pK (a) value) is rather variable. This indicates that species-dependent differences in reaction thermodynamics, although containing an important contribution from changes in the hydrogen-bonding network of water molecules in the hydration sphere of the protein (which feature enthalpy-entropy compensation), are to a large extent protein-based. The data for axial ligand variants are consistent with the hypothesis of a copper-binding His as the deprotonating residue responsible for this transition.

Reduction Potential Tuning at a Type 1 Copper Site Does Not Compromise Electron Transfer Reactivity

Type 1 (T1) copper sites promote biological electron transfer (ET) and typically possess a weakly coordinated thioether sulfur from an axial Met [Cu(II)-Sdelta approximately 2.6 to 3.3 A] along with the conserved His2Cys equatorial ligands. A strong axial bond [Cu(II)-Oepsilon1 approximately 2.2 A] is sometimes provided by a Gln (as in the stellacyanins), and the axial ligand can be absent (a Val, Leu or Phe in the axial position) as in ceruloplasmin, Fet3p, fungal laccases and some plantacyanins (PLTs). Cucumber basic protein (CBP) is a PLT which has a relatively short Cu(II)-S(Met89) axial bond (2.6 A). The Met89Gln variant of CBP has an electron self-exchange (ESE) rate constant (k(ese), a measure of intrinsic ET reactivity) approximately 7 times lower than that of the wild-type protein. The Met89Val mutation to CBP results in a 2-fold increase in k(ese). As the axial interaction decreases from strong Oepsilon1 of Gln to relatively weak Sdelta of Met to no ligand (Val), ESE reactivity is therefore enhanced by approximately 1 order of magnitude while the reduction potential increases by approximately 350 mV. The variable coordination position at this ubiquitous ET site provides a mechanism for tuning the driving force to optimize ET with the correct partner without significantly compromising intrinsic reactivity. The enhanced reactivity of a three-coordinate T1 copper site will facilitate intramolecular ET in fungal laccases and Fet3p.

Tunable pK of Amino Acid Residues at the Air−Water Interface Gives an L-zyme (Langmuir Enzyme)

Various amino acid-carrying amphiphiles were synthesized, and the pK values of the attached amino acid residues were investigated at the air-water interface and in aqueous vesicles using pi-A isotherm measurements, (1)H NMR titration, and IR spectroscopy in reflection-adsorption mode. The epsilon-amino group of the Lys residue embedded at the air-water interface displays a significant pK shift (4 or 5 unit) compared with that observed in bulk water, while the pK shift in aqueous vesicles was not prominent (ca. 1 unit). Moreover, pK values of the amino acids at the air-water interface can be tuned simply by control of the subphase ionic strength as well as by molecular design of the amphiphiles. A simple equation based on the dominant contribution by the electrostatic energy to the pK shift reproduces well the surface pressure difference between protonated and unprotonated species, suggesting a reduction in the apparent dielectric constant at the air-water interface. Hydrolysis of a p-nitrophenyl ester derivative was used as a model reaction to demonstrate the use of the Lys-functionalized monolayer. Efficient hydrolysis was observed, even at neutral pH, after tuning of pK for the Lys residue in the monolayer, which is a similar case to that occurring in biological catalysis.