Alginate Nanofibrous Mats with Adjustable Degradation Rate for Regenerative Medicine

Self-Assembly Reinforced Alginate Fibers for Enhanced Strength, Toughness, and Bone Regeneration

Material reinforcement commonly exists in a contradiction between strength and toughness enhancement. Herein, a reinforced strategy through self-assembly is proposed for alginate fibers. Sodium alginate (SA) microstructures with regulated secondary structures are assembled in acidic and ethanol as reinforcing units for alginate fibers. Acidity increases the flexibility of the helix and contributes to enhanced extendibility. Ethanol is responsible for formation of a stiff β-sheet, which enhances the modulus and strength. The structurally engineered SA assembly exhibits robust mechanical compatibility, and thus reinforced alginate fibers possess an improved tensile strength of 2.1 times, a prolonged elongation of 1.5 times, and an enhanced toughness of 3.0 times compared with SA fibers without reinforcement. The reinforcement through self-assembly provides an understanding of strengthening and toughening mechanism based on secondary structures. Due to a similar modulus with bones, reinforced alginate fibers exhibit good efficacy in accelerating bone regeneration in vivo.

Plant-Based, Hydrogel-like Microfibers as an Antioxidant Platform for Skin Burn Healing

Natural polymers from organic wastes have gained increasing attention in the biomedical field as resourceful second raw materials for the design of biomedical devices which can perform a specific bioactive function and eventually degrade without liberating toxic residues in the surroundings. In this context, patches and bandages, that need to support the skin wound healing process for a short amount of time to be then discarded, certainly constitute good candidates in our quest for a more environmentally friendly management. Here, we propose a plant-based microfibrous scaffold, loaded with vitamin C (VitC), a bioactive molecule which acts as a protecting agent against UV damages and as a wound healing promoter. Fibers were fabricated via electrospinning from various zein/pectin formulations, and subsequently cross-linked in the presence of Ca2+ to confer them a hydrogel-like behavior, which we exploited to tune both the drug release profile and the scaffold degradation. A comprehensive characterization of the physico-chemical properties of the zein/pectin/VitC scaffolds, either pristine or cross-linked, has been carried out, together with the bioactivity assessment with two representative skin cell populations (human dermal fibroblast cells and skin keratinocytes, HaCaT cells). Interestingly, col-1a gene expression of dermal fibroblasts increased after 3 days of growth in the presence of the microfiber extraction media, indicating that the released VitC was able to stimulate collagen mRNA production overtime. Antioxidant activity was analyzed on HaCaT cells via DCFH-DA assay, highlighting a fluorescence intensity decrease proportional to the amount of loaded VitC (down to 50 and 30%), confirming the protective effect of the matrices against oxidative stress. Finally, the most performing samples were selected for the in vivo test on a skin UVB-burn mouse model, where our constructs demonstrated to significantly reduce the inflammatory cytokines expression in the injured area (50% lower than the control), thus constituting a promising, environmentally sustainable alternative to skin patches.

An exploration of alginate oligosaccharides modulating intestinal inflammatory networks via gut microbiota

Alginate oligosaccharides (AOS) can be obtained by acidolysis and enzymatic hydrolysis. The products obtained by different methods have different structures and physiological functions. AOS have received increasing interest because of their many health-promoting properties. AOS have been reported to exert protective roles for intestinal homeostasis by modulating gut microbiota, which is closely associated with intestinal inflammation, gut barrier strength, bacterial infection, tissue injury, and biological activities. However, the roles of AOS in intestinal inflammation network remain not well understood. A review of published reports may help us to establish the linkage that AOS may improve intestinal inflammation network by affecting T helper type 1 (Th1) Th2, Th9, Th17, Th22 and regulatory T (Treg) cells, and their secreted cytokines [the hub genes of protein-protein interaction networks include interleukin-1 beta (IL-1β), IL-2, IL-4, IL-6, IL-10 and tumor necrosis factor alpha (TNF-α)] via the regulation of probiotics. The potential functional roles of molecular mechanisms are explored in this study. However, the exact mechanism for the direct interaction between AOS and probiotics or pathogenic bacteria is not yet fully understood. AOS receptors may be located on the plasma membrane of gut microbiota and will be a key solution to address such an important issue. The present paper provides a better understanding of the protecting functions of AOS on intestinal inflammation and immunity.

Alginate-based nanocarriers for the delivery and controlled-release of bioactive compounds

Alginate-based nanocarriers are propitious vehicles used for the delivery of bioactive compounds (bioactives). In this area, calcium alginate and sodium alginate are the most promising wall materials because they are nontoxic, comparatively cheap, simple in production, biocompatible and biodegradable. In this review, we have highlighted different alginate-based nanocarriers such as nanoparticles, nanofibers, nanoemulsions, nanocomplexes, and nanohydrogels; also entrapment of different bioactives within alginate nanocarriers and their bioavailability in the gastric environment has been comprehensively discussed. Being biopolymers, alginates can be exploited as emulsifiers/ encapsulants for entrapment and delivery of different bioactives such as vitamins, minerals, essential fatty acids, peptides, essential oils, bioactive oils, polyphenols and carotenoids. Furthermore, the use of alginate-based nanocarriers in combination with other polysaccharides/ emulsifiers was recognized as the most effective and favorable approach for the protection, delivery and sustained release of bioactives.

ELECTROSPUN SODIUM ALGINATE/POLY(ETHYLENE OXIDE) NANOFIBERS FOR WOUND HEALING APPLICATIONS: CHALLENGES AND FUTURE DIRECTIONS

Alginate is an interesting natural biopolymer to be considered for biomedical applications due to its advantages and good biological properties. These biological properties make electrospun alginate nanofibers suitable for various uses in the biomedical field, such as wound healing dressings, drug delivery systems, or both. Unfortunately, the fabrication of alginate nanofibers by electrospinning is very challenging because of the high viscosity of the solution, high surface tension and rigidity in water due to hydrogen bonding, and also their diaxial linkages. This review presents an overview of the factors affecting the electrospinning process of sodium alginate/poly(ethylene oxide) (SA/PEO), the application of SA/PEO in drug delivery systems for wound healing applications, and the degradation and swelling properties of SA/PEO. The challenges and future directions of SA/PEO in the medical field are also discussed.

Recovery of Model Pharmaceutical Compounds from Water and Organic Solutions with Alginate-Based Composite Membranes

In this work, we combined the non-solvent induced phase separation (NIPS) and further cross-linking by cations towards the preparation of nanofiltration membranes based on sodium alginate, a biodegradable, natural polymer. Acetone, ethanol, toluene, and hexane were used as non-solvents, and cations of calcium, silver, and aluminum—for polymer cross-linking, respectively. Results showed the precipitation strength of non-solvent played a noticeable role in the membrane’s performance; for instance, the toluene permeability changed by four orders of magnitude with the decrease of precipitation strength of the non-solvent: acetone (P_toluene = 0.1 kg∙m⁻²∙h⁻¹∙bar⁻¹) < ethanol (3 kg∙m⁻²∙h⁻¹∙bar⁻¹) < hexane (41 kg∙m⁻²∙h⁻¹∙bar⁻¹) < toluene (415 kg∙m⁻²∙h⁻¹∙bar⁻¹). It was shown that simultaneous precipitation and crosslinking in aqueous solutions AlCl₃ or AgNO₃ must be used in the preparation of alginate membranes for the highly selective recovery of pharmaceutical compounds from organic media. These membranes show rejection R = 90–93% of substances with MW = 626 g/mol and ethanol permeability P_EtOH = 1.5–2.5 kg∙m⁻²∙h⁻¹∙bar⁻¹. For the highly selective recovery of pharmaceutical compounds from water, the method of obtaining membranes must be changed. Precipitation in toluene and then crosslinking in aqueous solutions of AlCl₃ or AgNO₃ must be used sequentially instead of simultaneous precipitation and crosslinking in aqueous solutions of the same inorganic salts. The permeability of such membranes varied from 0.44 to 7.8 kg∙m⁻²∙h⁻¹∙bar⁻¹ depending on the crosslinking cation in the alginate. The rejection of model substances with MW 350 and 626 g/mol were on the level of 99%. Alginate membranes can be used to solve separation problems in the pharmaceutical field, for example, to isolate antibiotics from their extractants and remove the same antibiotics from aqueous pharmaceutical waste to prevent their accumulation in the environment and the emergence of resistant genes and bacteria.

Self-Enriching Electrospun Biosensors for Impedimetric Sensing of Zika Virus

Zika virus (ZIKV) infection is associated with the Guillain-Barré syndrome, and when non-vector congenital transmission occurs, fetal brain abnormalities are expected. After ZIKV infection, the blood, breast milk, and other body fluids contain low viral loads. Their detection is challenging as it requires the processing of larger input volumes of the clinical samples. Pre-enrichment is a valuable strategy to increase the analyte concentration. Therefore, the authors propose the use of a hierarchal composite polyaniline-(electrospun nanofiber) hydrogel mat (ENM) for the simultaneous enrichment and impedimetric sensing of ZIKV viral particles. The electrospinning conditions of polyvinyl alcohol and alginate, including blend formulation, were optimized through a factorial design. Disintegration and gelatinization were controlled via cross-linking to improve the hydrogel properties. Hierarchization was achieved by in situ chemical deposition of conductive polyaniline. The carboxyl groups of the ENM were used for the covalent immobilization of anti-ZIKV polyclonal antibodies used in the specific recognition of ZIKV within the medium of Vero cell culture. The specific capture and desorption of virions were studied at different pHs. ENMs were characterized by scanning electron microscopy and FTIR. Atomic force microscopy along with UV-vis and electrochemical impedance spectroscopies was used to monitor the antibody immobilization, ZIKV capture, and elution processes. Our results show that 14.2 mg (0.25 cm³) of ENM can capture 38.7 ± 2.5 μg of ZIKV with a desorption rate of 99.97% (38.29 ± 2.7 μg ZIKV), which is reusable for at least three times. Therefore, the capture capacity (micrograms of ZIKV captured per milligram of ENM) of polyaniline-hierarchized mats was 2.72 μg ZIKV/mg. The impedance LOD value was determined to be 2.76 μg of ZIKV particles (approximately 6.6 × 103 PFU/mL). As a result, we present a fast small-scale purification system that can simultaneously monitor ZIKV electrochemically and optically.

A critical review on the electrospun nanofibrous membranes for the adsorption of heavy metals in water treatment

Electrospun nanofibrous membranes (ENFMs) have many superior advantages, such as large specific surface area, high porosity, easy modification, good flexibility, and easy separation for recycling, which are consider as excellent adsorbents. In this paper, the research progress in the adsorption of heavy metals in water treatment by ENFMs is reviewed. Three types of ENFMs, including organic polymer ENFMs, organic polymer/inorganic material composite ENFMs and inorganic ENFMs are summarized, and their adsorption capacities for heavy metals in water are compared. The adsorption selectivity and capacity of ENFMs for heavy metals are depended largely on the type and number of functional groups on the surface of membranes, and usually the more the functional groups, the higher the adsorption capacity. The adsorption mechanisms of ENFMs are also mainly determined by the type of functional groups on the membrane. At present, the main challenge is to achieve the mass production of high-quality nanofibers and their actual application in the treatment of heavy metal-containing wastewater. Therefore, more consideration should be focused on the improvement of stability, mechanical strength and reusability of ENFMs. This review may provide an insight for the development of ENFMs-based adsorbents for heavy metals separation and water purification in the future.

How does counter-cation substitution influence inter- and intramolecular hydrogen bonding and electrospinnability of alginates

Despite numerous applications of nanofibrous alginate (Alg) mat, its facile fabrication via electrospinning is still challenging. The low alginate content compared to the carrier polymer and existence of impurities are the main drawbacks of existing approaches. The purpose of this research is both to study and improve alginate electrospinnability by focusing on the effect of inter- and intramolecular hydrogen bonding. Based on hard and soft acids and bases (HSAB) theory, the Na⁺ cations (carboxylate counter-cation) were substituted with a harder acid, Li⁺ cation, to increase the strength of ionic interaction and decrease the density of hydrogen bonding. Viscosity and electrical conductivity measurements as well as FTIR and ¹H NMR revealed a lower intramolecular hydrogen bonding density in Li-Alg. SEM images showed improvement of alginate electrospinnability for Li-Alg compared to the salts of Na-Alg and K-Alg. This study sheds more light on underlying reasons hindering alginate electrospinning and introduces a simple method for fabrication of nanofibers with high alginate content.

Electrospinning Highly Concentrated Sodium Alginate Nanofibres without Surfactants by Adding Fluorescent Carbon Dots

In this study, sodium alginate (SA) nanofibres were obtained by electrospinning via the assistance of traditional poly(ethyl oxide) (PEO) and dimethyl sulfoxide (DMSO) with a high SA/PEO ratio of up to 94:6. However, surfactants with more or less toxicities were replaced by nontoxic and fluorescent carbon dots (CDs) to improve spinnability. Experimental details were conducted by fixing the ratio of SA/PEO to 90:10. Then, the electrospinning products of solutions with different compositions were observed with scanning electron microscopy. Properties such as conductivity, surface tension and rheology of the solutions were investigated to determine the key influencing factors. Moreover, since CDs have excellent fluorescence properties, the fluorescent properties of the nanofibre membrane that was blended with CDs were then collected. In addition, in vitro cytotoxicity assessment of the nanofibres were conducted to evaluate the toxicities and biocompatibility.

Alginate-based composite materials for wound dressing application:A mini review

Alginate biopolymer has been used in the design and development of several wound dressing materials in order to improve the efficiency of wound healing. Mainly, alginate improves the hydrophilic nature of wound dressing materials in order to create the required moist wound environment, remove wound exudate and increase the speed of skin recovery of the wound. In addition, alginate can easily cross-link with other organic and inorganic materials and they can promote wound healing in clinical applications. This review article addresses the importance of alginates and the roles of derivative polymeric materials in wound dressing biomaterials. Additionally, studies on recent alginate-based wound dressing materials are discussed.

Electrospun Alginate Nanofibers Toward Various Applications: A Review

Alginate has been a material of choice for a spectrum of applications, ranging from metal adsorption to wound dressing. Electrospinning has added a new dimension to polymeric materials, including alginate, which can be processed to their nanosize levels in order to afford unique nanostructured materials with fascinating properties. The resulting nanostructured materials often feature high porosity, stability, permeability, and a large surface-to-volume ratio. In the present review, recent trends on electrospun alginate nanofibers from over the past 10 years toward advanced applications are discussed. The application of electrospun alginate nanofibers in various fields such as bioremediation, scaffolds for skin tissue engineering, drug delivery, and sensors are also elucidated.

Nanofibrous Scaffolds Support a 3D in vitro Permeability Model of the Human Intestinal Epithelium

Advances in drug research not only depend on high throughput screening to evaluate large numbers of lead compounds but also on the development of in vitro models which can simulate human tissues in terms of drug permeability and functions. Potential failures, such as poor permeability or interaction with efflux drug transporters, can be identified in epithelial Caco-2 monolayer models and can impact a drug candidate's progression onto the next stages of the drug development process. Whilst monolayer models demonstrate reasonably good prediction of in vivo permeability for some compounds, more developed in vitro tools are needed to assess new entities that enable closer in vivo in vitro correlation. In this study, an in vitro model of the human intestinal epithelium was developed by utilizing nanofibers, fabricated using electrospinning, to mimic the structure of the basement membrane. We assessed Caco-2 cell response to these materials and investigated the physiological properties of these cells cultured on the fibrous supports, focusing on barrier integrity and drug-permeability properties. The obtained data illustrate that 2D Caco-2 Transwell® cultures exhibit artificially high trans-epithelial electrical resistance (TEER) compared to cells cultured on the 3D nanofibrous scaffolds which show TEER values similar to ex vivo porcine tissue (also measured in this study). Furthermore, our results demonstrate that the 3D nanofibrous scaffolds influence the barrier integrity of the Caco-2 monolayer to confer drug-absorption properties that more closely mimic native gut tissue particularly for studying passive epithelial transport. We propose that this 3D model is a suitable in vitro model for investigating drug absorption and intestinal metabolism.

Current development of biodegradable polymeric materials for biomedical applications

In the last half-century, the development of biodegradable polymeric materials for biomedical applications has advanced significantly. Biodegradable polymeric materials are favored in the development of therapeutic devices, including temporary implants and three-dimensional scaffolds for tissue engineering. Further advancements have occurred in the utilization of biodegradable polymeric materials for pharmacological applications such as delivery vehicles for controlled/sustained drug release. These applications require particular physicochemical, biological, and degradation properties of the materials to deliver effective therapy. As a result, a wide range of natural or synthetic polymers able to undergo hydrolytic or enzymatic degradation is being studied for biomedical applications. This review outlines the current development of biodegradable natural and synthetic polymeric materials for various biomedical applications, including tissue engineering, temporary implants, wound healing, and drug delivery.

Influence of topography of nanofibrous scaffolds on functionality of engineered neural tissue

Properly engineered scaffolds combined with functional neurons can be instrumental for the effective repair of the neural tissue. In particular, it is essential to investigate how three-dimensional (3D) systems and topographical features can impact on neuronal activity to obtain engineered functional neural tissues. In this study, polyphenylene sulfone (PPSu) scaffolds constituted by randomly distributed or aligned electrospun nanofibers were fabricated to evaluate the neural activity in 3D culture environments for the first time. The obtained results demonstrated that the nanofibers can successfully support the adhesion and growth of neural stem cells (NSCs) and enhance neuronal differentiation compared to 2D substrates. In addition, NSCs could spread and migrate along the aligned fibers. The percentage of active NSC-derived neurons and the overall network activity in the fibrous substrates were also remarkably enhanced. Finally, the data of neuronal activity showed not only that the neurons cultured on the nanofibers are part of a functional network, but also that their activity increases, and the direction of neural signals can be controlled in the aligned 3D scaffolds.

Anomaly Detection in Nanofibrous Materials by CNN-Based Self-Similarity

Automatic detection and localization of anomalies in nanofibrous materials help to reduce the cost of the production process and the time of the post-production visual inspection process. Amongst all the monitoring methods, those exploiting Scanning Electron Microscope (SEM) imaging are the most effective. In this paper, we propose a region-based method for the detection and localization of anomalies in SEM images, based on Convolutional Neural Networks (CNNs) and self-similarity. The method evaluates the degree of abnormality of each subregion of an image under consideration by computing a CNN-based visual similarity with respect to a dictionary of anomaly-free subregions belonging to a training set. The proposed method outperforms the state of the art.

Bio-based materials with novel characteristics for tissue engineering applications - A review

Recently, a wider spectrum of bio-based materials and materials-based novel constructs and systems has been engineered with high interests. The key objective is to help for an enhanced/better quality of life in a secure way by avoiding/limiting various adverse effects of some in practice traditional therapies. In this context, different methodological approaches including in vitro, in vivo, and ex vivo techniques have been exploited, so far. Among them, bio-based therapeutic constructs are of supreme interests for an enhanced and efficient delivery in the current biomedical sector of the modern world. The development of new types of novel, effective and highly reliable materials-based novel constructs for multipurpose applications is essential and a core demand to tackle many human health related diseases. Bio-based materials possess several complementary functionalities, e.g. unique chemical structure, bioactivity, non-toxicity, biocompatibility, biodegradability, recyclability, etc. that position them well in the modern world's materials sector. In this context, the utilization of biomaterials provides extensive opportunities for experimentation in the field of interdisciplinary and multidisciplinary scientific research. With an aim to address the global dependence on petroleum-based polymers, researchers have been redirecting their interests to the engineering of biological materials for targeted applications in different industries including cosmetics, pharmaceuticals, and other biotechnological or biomedical applications. Herein, we reviewed biotechnological advancements at large and tissue engineering from a biomaterials perspective in particular and envision directions of future developments.

Alginate-lavender nanofibers with antibacterial and anti-inflammatory activity to effectively promote burn healing

One of the current challenges in wound care is the development of multifunctional dressings that can both protect the wound from external agents and promote the regeneration of the new tissue. Here, we show the combined use of two naturally derived compounds, sodium alginate and lavender essential oil, for the production of bioactive nanofibrous dressings by electrospinning, and their efficacy for the treatment of skin burns induced by midrange ultraviolet radiation (UVB). We demonstrate that the engineered dressings reduce the risk of microbial infection of the burn, since they stop the growth of Staphylococcus aureus. Furthermore, they are able to control and reduce the inflammatory response that is induced in human foreskin fibroblasts by lipopolysaccharides, and in rodents by UVB exposure. In particular, we report a remarkable reduction of pro-inflammatory cytokines when fibroblasts or animals are treated with the alginate-based nanofibers. The down-regulation of cytokines production and the absence of erythema on the skin of the treated animals confirm that the here described dressings are promising as advanced biomedical devices for burn management.

Electrospinning of natural polymers for advanced wound care: towards responsive and adaptive dressings

Nanofibrous dressings produced by electrospinning proteins and polysaccharides are highly promising candidates in promoting wound healing and skin regeneration.

Zwitterionic Nanofibers of Super-Glue for Transparent and Biocompatible Multi-Purpose Coatings

Here we show that macrozwitterions of poly(ethyl 2-cyanoacrylate), commonly called Super Glue, can easily assemble into long and well defined fibers by electrospinning. The resulting fibrous networks are thermally treated on glass in order to create transparent coatings whose superficial morphology recalls the organization of the initial electrospun mats. These textured coatings are characterized by low liquid adhesion and anti-staining performance. Furthermore, the low friction coefficient and excellent scratch resistance make them attractive as solid lubricants. The inherent texture of the coatings positively affects their biocompatibility. In fact, they are able to promote the proliferation and differentiation of myoblast stem cells. Optically-transparent and biocompatible coatings that simultaneously possess characteristics of low water contact angle hysteresis, low friction and mechanical robustness can find application in a wide range of technological sectors, from the construction and automotive industries to electronic and biomedical devices.