Supramolecular materials via polymerization of mesophases of hydrated amphiphiles

Lipid cubic phase with an organic-inorganic hybrid structure formed by organoalkoxysilane lipid

A lipid cubic phase encompassing a cross-linked siloxane structure was formed by the self-assembly of a synthetic organoalkoxysilane lipid in water. The spontaneous sol-gel reaction of the alkoxysilane moiety on the lipid head group produced an organic-inorganic hybrid material with a double gyroid Ia3d cubic structure.

Cross-linkable, phosphobetaine-based, zwitterionic amphiphiles that form lyotropic bicontinuous cubic phases

The design, synthesis, and lyotropic liquid crystal phase behaviour of six cross-linkable, phosphobetaine-based, zwitterionic amphiphiles are described. Two form a QII phase with aq. NH4Cl solution, giving 3D-nanoporous membrane materials that can be used for water desalination and are not susceptible to ion exchange like traditional ionic analogues.

The Journey of 1-Keto-1,2,3,4-Tetrahydrocarbazole Based Fluorophores: From Inception to Implementation

Carbazole is a unique template associated with several biological activities. It is due to the diverse and versatile biological properties of carbazole derivatives that they are of immense interest to the research community. 1-keto-1,2,3,4-tetrahydrocarbazoles are important synthetic intermediates to obtain carbazole derivatives. Several members of this family emit fluorescence on photoexcitation. In the context of biochemical and biophysical research, designing and characterising small molecule environment sensitive fluorophores is extremely significant. This article aims to be a state of the art review with synthetic and photophysical details of a variety of fluorophores based on 1-keto-1,2,3,4-tetrahydrocarbazole skeleton.

Nanomechanical Properties of Artificial Lipid Bilayers Composed of Fluid and Polymerizable Lipids

Polymerization enhances the stability of a planar supported lipid bilayer (PSLB) but it also changes its chemical and mechanical properties, attenuates lipid diffusion, and may affect the activity of integral membrane proteins. Mixed bilayers composed of fluid lipids and poly(lipids) may provide an appropriate combination of polymeric stability coupled with the fluidity and elasticity needed to maintain the bioactivity of reconstituted receptors. Previously (Langmuir, 2019, 35, 12483-12491) we showed that binary mixtures of the polymerizable lipid bis-SorbPC and the fluid lipid DPhPC form phase-segregated PSLBs composed of nanoscale fluid and poly(lipid) domains. Here we used atomic force microscopy (AFM) to compare the nanoscale mechanical properties of these binary PSLBs with single-component PSLBs. The elastic (Young's) modulus, area compressibility modulus, and bending modulus of bis-SorbPC PSLBs increased upon polymerization. Before polymerization, breakthrough events at forces below 5 nN were observed, but after polymerization, the AFM tip could not penetrate the PSLB up to an applied force of 20 nN. These results are attributed to the polymeric network in poly(bis-SorbPC), which increases the bilayer stiffness and resists compression and bending. In binary DPhPC/poly(bis-SorbPC) PSLBs, the DPhPC domains are less stiff, more compressible, and are less resistant to rupture and bending compared to pure DPhPC bilayers. These differences are attributed to bis-SorbPC monomers and oligomers present in DPhPC domains that disrupt the packing of DPhPC molecules. In contrast, the poly(bis-SorbPC) domains are stiffer and less compressible relative to pure PSLBs; this difference is attributed to DPhPC filling the nm-scale pores in the polymerized domains that are created during bis-SorbPC polymerization. Thus, incomplete phase segregation increases the stability of poly(bis-SorbPC) but has the opposite, detrimental effect for DPhPC. Overall, these results provide guidance for the design of partially polymerized bilayers for technological uses.

Gamma Radiation- and Ultraviolet-Induced Polymerization of Bis(amino acid)fumaramide Gel Assemblies

Controlling the polymerization of supramolecular self-assembly through external stimuli holds great potential for the development of responsive soft materials and manipulation at the nanoscale. Vinyl esters of bis(leu or val)fumaramide (1a and 2a) have been found to be gelators of various organic solvents and were applied in this investigation of the influence of organogelators’ self-assembly on solid-state polymerization induced by gamma and ultraviolet irradiation. Here, we report our investigation into the influences of self-assemblies of bis(amino acid vinyl ester)fumaramides on gamma-ray- and ultraviolet-induced polymerization. The gelator molecules self-assembled by non-covalent interactions, mainly through hydrogen bonds between the amide group (CONH) and the carboxyl group (COO), thus forming a gel network. NMR and FTIR spectroscopy were used to investigate and characterize supramolecular gels. TEM and SEM microscopy were used to investigate the morphology of gels and polymers. Morphology studies showed that the gels contained a filamentous structure of nanometer dimensions that was exhaustive in a three-dimensional network. The prepared derivatives contained reactive alkyl groups suitable for carrying out the polymerization reaction initiated by gamma or ultraviolet radiation in the supramolecular aggregates of selected gels. It was found that the polymerization reaction occurred only in the network of the gel and was dependent on the structure of aggregates or the proximity and orientation of double bonds in the gel network. Polymers were formed by the gels exposure to gamma and ultraviolet radiation in toluene, and water/DMF gels with transcripts of their gel structure into polymers. The polymeric material was able to immobilize various solvents by swelling. Furthermore, methyl esters of bis(leu and val)fumaramide (1b and 2b) were synthesized; these compounds showed no gelling properties, and the crystal structure of the valine derivative 2b was determined.

Effects of structural modification of (alkyldiene-imidazolium bromide)-based gemini monomers on the formation of the lyotropic bicontinuous cubic phase

Seven homologues of an amphiphilic gemini monomer were synthesized and screened for the ability to form a bicontinuous cubic (Q) lyotropic liquid crystal phase. Four of these homologues form a Q phase with glycerol or water that can be cross-linked with retention of the nanoporous structure, with one exhibiting a well-ordered Q phase with a wider phase window than the parent monomer.

Stable cross-linked lyotropic gyroid mesophases from single-head/single-tail cross-linkable monomers

A single-head/single-tail surfactant with a polymerizable group at each end is presented as a new simplified motif for intrinsically cross-linkable, gyroid-phase lyotropic mesogens. The resulting nanoporous polymer networks exhibit excellent structural stability in various solvents and are capable of molecular size discrimination.

A Note about Crosslinking Density in Imprinting Polymerization

Imprinting polymerization is an exciting technique since it leads to specific binding sites, which are the basis of a variety of applications, such as sensors, detectors, and catalysts. The specific binding sites are created using templates and then fixing the structure of the binding site with crosslinking. The literature review of imprinting polymerizations shows that the crosslinking density governs the physical properties of the resulting molecularly imprinted polymer (MIP). It is also a factor governing the capacity and the selectivity of MIPs. Reviewing polymer science data and theory, the crosslinking density commonly used in MIP synthesis is unusually high. The data reviewed here suggest that more research is needed to determine the optimal crosslinking density for MIPs.

Substrate-supported Model Membrane as a Versatile Analytical/Biosensing Platform

Biological membranes composed of a lipid bilayer and associated proteins work as a platform for highly selective and sensitive detection in nature. Substrate-supported lipid bilayers (SLBs) are a model system of the biological membrane that are mechanically stable, accessible to highly sensitive analytical techniques, and amenable to micro-fabrication, such as patterning. The surface of SLBs can effectively suppress the non-specific binding of proteins, and enhance selective detection by specific interactions. These features render SLBs highly attractive for the development of devices that utilize artificially mimicked cellular functions. Furthermore, SLBs can be combined with nanoscopic spaces, such as nano-channels and nano-pores, that can reduce the detection volume and suppress the non-specific background noise, enhancing the signal-to-background noise (S/B) ratio. SLBs therefore provide promising platforms for a wide range of biomedical and environmental analyses.

Alkali Metal Salts of 10,12-Pentacosadiynoic Acid and Their Dosimetry Applications

Wide-dose-range 2D radiochromic films for radiotherapy, such as GAFchromic EBT, are based on the lithium salt of 10,12-pentacosadiynoic acid (Li-PCDA) as the photosensitive component. We show that there are two solid forms of Li-PCDA-a monohydrated form A and an anhydrous form B. The form used in commercial GAFchromic films is form A due to its short needle-shaped crystals, which provide favorable coating properties. Form B provides an enhanced photoresponse compared to that of form A, but adopts a long needle crystal morphology, which is difficult to process. The two forms were characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, CP-MAS ¹³C solid-state NMR spectroscopy, and thermogravimetric analysis. In sum, these data suggest a chelating bridging bidentate coordination mode for the lithium ions. The sodium salt of PCDA (Na-PCDA) is also reported, which is an ionic cocrystal with a formula of Na⁺PCDA^-·3PCDA. The PCDA and PCDA^- ligands display monodentate and bridging bidentate coordination to the sodium ion in contrast to the coordination sphere of the Li-PCDA forms. In contrast to its lithium analogues, Na-PCDA is photostable.

The crystal engineering of radiation-sensitive diacetylene cocrystals and salts

In this work we develop photoreactive cocrystals/salts of a commercially-important diacetylene, 10,12-pentacosadiynoic acid (PCDA, 1) and report the first X-ray crystal structures of PCDA based systems. The topochemical reactivity of the system is modified depending on the coformer used and correlates with the structural parameters. Crystallisation of 1 with 4,4'-azopyridine (2), 4,4'-bipyridyl (3), and trans-1,2-bis(4-pyridyl)ethylene (4) results in unreactive 2 : 1 cocrystals or a salt in the case of 4,4'-bipiperidine (5). However, salt formation with morpholine (6), diethylamine (7), and n-butylamine (8), results in highly photoreactive salts 12·7 and 1·8 whose reactivity can be explained using topochemical criteria. The salt 1·6 is also highly photoreactive and is compared to a model morpholinium butanoate salt. Resonance Raman spectroscopy reveals structural details of the photopolymer including its conformational disorder in comparison to less photoactive alkali metal salts and the extent of solid state conversion can be monitored by CP-MAS NMR spectroscopy. We also report an unusual catalysis in which amine evaporation from photopolymerised PCDA ammonium salts effectively acts as a catalyst for polymerisation of PCDA itself. The new photoreactive salts exhibit more reactivity but decreased conjugation compared to the commercial lithium salt and are of considerable practical potential in terms of tunable colours and greater range in UV, X-ray, and γ-ray dosimetry applications.

Lipid-based mesophases as matrices for nanoscale reactions

Lipidic mesophases are versatile bioorganic materials that have been effectively employed as nanoscale matrices for membrane protein crystallization, drug delivery and as food emulsifiers over the last 30 years. In this review, the focus is upon studies that have employed non-lamellar lipid mesophases as matrices for organic, inorganic and enzymatic reactions. The ability of lipidic mesophases to incorporate hydrophilic, amphiphilic and hydrophobic molecules, together with the high interfacial area of the lipidic cubic and inverse hexagonal phases has been exploited in heterogeneous catalysis as well as for enzyme immobilization. The unique nanostructure of these mesophases is the driving force behind their ability to act as templates for synthesis, resulting in the creation of highly ordered polymeric and inorganic materials with complex geometries.

Nanodomain Formation in Planar Supported Lipid Bilayers Composed of Fluid and Polymerized Dienoyl Lipids

Polymerization of synthetic phospholipid monomers has been widely used to enhance the stability of lipid membranes in applications such as membrane-based biosensing, where the inherent instability of fluid-phase lipid bilayers can be problematic. However, lipid polymerization typically decreases membrane fluidity, which may be required to maintain the activity of reconstituted integral proteins and peptides. Prior work has shown that a bilayer composed of binary mixtures of poly(lipid) and fluid lipid exhibits enhanced stability and supports the function of incorporated biomolecules. This work examines the structural basis of these findings using planar supported lipid bilayers (PSLBs) composed of binary mixtures of a polymerizable lipid, 1,2-bis[10-(2',4'-hexadienoloxy)decanoyl]-sn-glycero-3-phosphocholine (bis-SorbPC), and a nonpolymerizable lipid, 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC). Fluorescence recovery after photobleaching (FRAP) measurements showed that long-range lateral diffusion was minimally affected when the poly(lipid) mole ratio was ≤0.7. Atomic force microscopy, used to examine phase segregation in these PSLBs, showed that DPhPC forms a continuous lipid matrix that is 0.2-0.4 nm thicker than the island-like poly(bis-SorbPC) domains, with lateral dimensions of ≤200 nm. The nanoscale phase segregation allows for long-range lateral diffusion of lipid probes in the DPhPC matrix. The combination of fluidity and stability in these materials should make them useful in membrane-based biosensing applications.

Surface Modification by Polyzwitterions of the Sulfabetaine-Type, and Their Resistance to Biofouling

Films of zwitterionic polymers are increasingly explored for conferring fouling resistance to materials. Yet, the structural diversity of polyzwitterions is rather limited so far, and clear structure-property relationships are missing. Therefore, we synthesized a series of new polyzwitterions combining ammonium and sulfate groups in their betaine moieties, so-called poly(sulfabetaine)s. Their chemical structures were varied systematically, the monomers carrying methacrylate, methacrylamide, or styrene moieties as polymerizable groups. High molar mass homopolymers were obtained by free radical polymerization. Although their solubilities in most solvents were very low, brine and lower fluorinated alcohols were effective solvents in most cases. A set of sulfabetaine copolymers containing about 1 mol % (based on the repeat units) of reactive benzophenone methacrylate was prepared, spin-coated onto solid substrates, and photo-cured. The resistance of these films against the nonspecific adsorption by two model proteins (bovine serum albumin-BSA, fibrinogen) was explored, and directly compared with a set of references. The various polyzwitterions reduced protein adsorption strongly compared to films of poly(nbutyl methacrylate) that were used as a negative control. The poly(sulfabetaine)s showed generally even somewhat higher anti-fouling activity than their poly(sulfobetaine) analogues, though detailed efficacies depended on the individual polymer-protein pairs. Best samples approach the excellent performance of a poly(oligo(ethylene oxide) methacrylate) reference.

Investigation of Spontaneous Polycondensation of N-(O, O-Ditetradecyl) Phosphorylalanine in Highly Ordered Films by Ftir Spectroscopy

Spontaneous polycondensation to polypeptides on both cast films and Langmuir-Blodgett films (LB films) of N-(O, O-ditetradecyl)phosphorylalanine (DNTP-L-Ala) was studied by FTIR transmission spectroscopy.

Molecular Design of Zwitterionic Polymer Interfaces: Searching for the Difference

The widespread occurrence of zwitterionic compounds in nature has incited their frequent use in designing biomimetic materials. Therefore, zwitterionic polymers are a thriving field. A particular interest for this particular polymer class has currently focused on their use in establishing neutral, low-fouling surfaces. After highlighting strategies to prepare model zwitterionic surfaces as well as those that are more suitable for practical purposes relying strongly on radical polymerization methods, we present recent efforts to diversify the structure of the hitherto quite limited variety of zwitterionic monomers and of the derived polymers. We identify key structural variables, consider their influence on essential properties such as overall hydrophilicity and long-term stability, and discuss promising targets for the synthesis of new variants.

Formation of nanopores in DiynePC-DPPC complex lipid bilayers triggered by on-demand photo-polymerization

Vesicles have unique characteristics that enable the release of drugs as well as encapsulation while maintaining biocompatibility. A photo-polymerizable liposome composed of 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (23:2 DiynePC) has been investigated as vehicles for triggered delivery of drugs to cells. In this study, we confirmed for the first time that supported lipid bilayers (SLBs) prepared with a 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)/DiynePC mixture generated pores ca. 100-300 nm in size on the membrane after UV polymerization. This direct observation was done by analyzing the SLBs formed with the DPPC/DiynePC mixture by employing atomic force microscopy (AFM) in a liquid environment. However, photo-polymerization did not occur in the 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC)/DiynePC mixed bilayer and pores were not formed. A theoretical study was performed to explore the phase behavior of the lipid mixtures. A coarse-grained model of DiynePC was developed that is comparable with the Martini force field; the parameters were validated against atomistic simulations. Transition from fluidic to gel phase was observed only when DiynePC was mixed with DPPC, whereas the DOPC mixture remained fluidic over the entire domain. This implies a correlation between the formation of DiynePC-rich gel phase domains and the generation of pores after polymerization. The size of the pores were found to be controlled by the amount of polymerizable lipid which results in higher release rate of encapsulated calcein from the vesicles with larger pores.

Can PEI microgels become biocompatible upon betainization?

Polyethylene imine (PEI) microgels prepared via micro emulsion polymerization technique were treated with 1,3-propane sultone to obtained betainized PEI (b-PEI) microgels. The betainization reaction generated zwitterions on PEI microgel that are positive charges from quarternized amine groups of PEI, and the newly formed negative charges from SO₃^- groups from the modifying agent, 1,3-propane sultone offered interesting properties. The smaller size of b-PEI microgels that are obtained by simple filtration were increased with betainization from 512±14 to 1114±86nm. Also, the betainization of PEI microgel provided negative zeta potential values at high pH values as 9, 10, 11, and 12. Moreover, the b-PEI microgels render more effective dye absorption capabilities for anionic or cationic organic dyes such as Methyl Orange (MO) and Methylene Blue (MB) separately with the significant increase dye adsorption capacity of 354±31 and 274±19mg/g respectively. Moreover, antibacterial properties of b-PEI microgels tested on the E. coli ATCC 8739 and S. aureus ATCC 6538 were diminished whereas bare PEI has low MIC and MBC values (strong antibacterial properties). Interestingly, the PEI microgels known for their strong antibacterial and toxic nature found to be biocompatible upon betainization reaction. The biocompatibility test were carried with WST-1 tests and double staining methods. The cytotoxicity, apoptotic and necrotic cell tests were shown that PEI microgels induce no cytotoxicity up to 400μg/mL whereas PEI microgels possessed 50% toxicity at this concentration, suggesting that b-PEI microgels become biocompatible upon betainization with, 3-propane sultone.

Synthesis of Norbornene Derived Helical Copolymer by Simple Molecular Marriage Approach to Produce Smart Nanocarrier

A novel library of norbornene derived helical copolymer has been synthesized through the coupling of two homopolymers via Molecular Marriage Approach. The helicity is governed by the non-covalent interactions like hydrogen bonding, π-π stacking and the influence of hydrophobic and hydrophilic motifs. The detailed characterization of the copolymer (Copoly 1) has been provided and the super structures are confirmed through dynamic light scattering (DLS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The observed size of the aggregates was about 200 nm. The density functional theory (DFT) is favorably supported for the formation of proposed structure of Copoly 1. Circular dichroism (CD) measurement has confirmed the one handed helical structure of the copolymer. Reservoir capability of this pH responsive polymer (Copoly 1) to encapsulate anti-cancer drug doxorubicin (DOX) warrants its potential applications in the field of bio-medical sciences.

Detailed Structural Analysis of a Self-Assembled Vesicular Amphiphilic NCN-Pincer Palladium Complex by Using Wide-Angle X-Ray Scattering and Molecular Dynamics Calculations

Wide-angle X-ray scattering experiments and all-atomistic molecular dynamics calculations were performed to elucidate the detailed structure of bilayer vesicles constructed by self-assembly of an amphiphilic palladium NCN-pincer complex. We found an excellent agreement between the experimental and calculated X-ray spectra, and between the membrane thickness determined from a TEM image and that calculated from an electron-density profile, which indicated that the calculated structure was highly reliable. The analysis of the simulated bilayer structure showed that in general the membrane was softer than other phospholipid bilayer membranes. In this bilayer assemblage, the degree of alignment of complex molecules in the bilayer membrane was quite low. An analysis of the electron-density profile shows that the bilayer assemblage contains a space through which organic molecules can exit. Furthermore, the catalytically active center is near this space and is easily accessible by organic molecules, which permits the bilayer membrane to act as a nanoreactor. The free energy of permeation of water through the bilayer membrane of the amphiphilic complex was 12 kJ mol^-1 , which is much lower than that for phospholipid bilayer membranes in general. Organic molecules are expected to pass though the bilayer membrane. The self-assembled vesicles were shown to be catalytically active in a Miyaura-Michael reaction in water.

A versatile platform for lanthanide(iii)-containing organogelators: fabrication of the Er(iii)-incorporated polymer nanocomposite from an organogel template

An Er(iii)-containing polymer nanocomposite that showed an enhanced NIR emission was prepared from an organogel template via post-gelation polymerisation.

Effect of an n-Alkoxy-2,4-hexadiene Polymerizable Tail System on the Mesogenic Properties and Cross-Linking of Mono-Imidazolium-Based Ionic Liquid Crystal Monomers

We demonstrate that an ether-based n-alkoxy-2,4-hexadiene polymerizable tail system is an effective and modular alternative to traditional ester-based polymerizable tail groups (i.e., acrylate, methacrylate, sorbate) and alkyl-1,3-diene tails for the design of radically polymerized ionic liquid crystal (ILC) monomers. Several series of nonsymmetric 1-vinylimidazolium-bromide-based ILC monomers containing these different polymerizable tail systems were synthesized and compared for their ability to form thermotropic liquid crystal (TLC) phases and to be photo-cross-linked with TLC phase retention. The n-alkoxy-2,4-hexadiene tail system was found to be more favorable/conducive to TLC phase formation than acrylate, methacrylate, and sorbate tails. It was more similar to the alkyl-1,3-diene tail system in terms of its more favorable effect on TLC behavior; however, it is more modular/easier to synthesize, more resistant to thermal Diels-Alder side reaction, and more isomerically pure, making it better for ILC monomer design. Also, the n-alkoxy-2,4-hexadiene tail system was found to be very amenable to radical photo-cross-linking with TLC phase retention. To demonstrate this feature, an example cross-linkable ILC monomer with this tail system was synthesized and polymerized in the smectic A TLC phase, and the monomer and polymerized material were characterized for their ionic conductivity behavior.

Surface-Cross-Linked Micelles as Multifunctionalized Organic Nanoparticles for Controlled Release, Light Harvesting, and Catalysis

Surfactant micelles are dynamic entities with a rapid exchange of monomers. By "clicking" tripropargylammonium-containing surfactants with diazide cross-linkers, we obtained surface-cross-linked micelles (SCMs) that could be multifunctionalized for different applications. They triggered membrane fusion through tunable electrostatic interactions with lipid bilayers. Antenna chromophores could be installed on them to create artificial light-harvesting complexes with efficient energy migration among tens to hundreds of chromophores. When cleavable cross-linkers were used, the SCMs could break apart in response to redox or pH signals, ejecting entrapped contents quickly as a result of built-in electrostatic stress. They served as caged surfactants whose surface activity was turned on by environmental stimuli. They crossed cell membranes readily. Encapsulated fluorophores showed enhanced photophysical properties including improved quantum yields and greatly expanded Stokes shifts. Catalytic groups could be installed on the surface or in the interior, covalently attached or physically entrapped. As enzyme mimics, the SCMs enabled rational engineering of the microenvironment around the catalysts to afford activity and selectivity not possible with conventional catalysts.

Ionic Liquid Crystals: Versatile Materials

This Review covers the recent developments (2005-2015) in the design, synthesis, characterization, and application of thermotropic ionic liquid crystals. It was designed to give a comprehensive overview of the "state-of-the-art" in the field. The discussion is focused on low molar mass and dendrimeric thermotropic ionic mesogens, as well as selected metal-containing compounds (metallomesogens), but some references to polymeric and/or lyotropic ionic liquid crystals and particularly to ionic liquids will also be provided. Although zwitterionic and mesoionic mesogens are also treated to some extent, emphasis will be directed toward liquid-crystalline materials consisting of organic cations and organic/inorganic anions that are not covalently bound but interact via electrostatic and other noncovalent interactions.

Photopolymerization of Dienoyl Lipids Creates Planar Supported Poly(lipid) Membranes with Retained Fluidity

Polymerization of substrate-supported bilayers composed of dienoylphosphatidylcholine (PC) lipids is known to greatly enhance their chemical and mechanical stability; however, the effects of polymerization on membrane fluidity have not been investigated. Here planar supported lipid bilayers (PSLBs) composed of dienoyl PCs on glass substrates were examined to assess the degree to which UV-initiated polymerization affects lateral lipid mobility. Fluorescence recovery after photobleaching (FRAP) was used to measure the diffusion coefficients (D) and mobile fractions of rhodamine-DOPE in unpolymerized and polymerized PSLBs composed of bis-sorbyl phosphatidylcholine (bis-SorbPC), mono-sorbyl-phosphatidylcholine (mono-SorbPC), bis-dienoyl-phosphatidylcholine (bis-DenPC), and mono-dienoyl phosphatidylcholine (mono-DenPC). Polymerization was performed in both the Lα and Lβ phase for each lipid. In all cases, polymerization reduced membrane fluidity; however, measurable lateral diffusion was retained which is attributed to a low degree of polymerization. The D values for sorbyl lipids were less than those of the denoyl lipids; this may be a consequence of the distal location of polymerizable group in the sorbyl lipids which may facilitate interleaflet bonding. The D values measured after polymerization were 0.1-0.8 of those measured before polymerization, a range that corresponds to fluidity intermediate between that of a Lα phase and a Lβ phase. This D range is comparable to ratios of D values reported for liquid-disordered (Ld) and liquid-ordered (Lo) lipid phases and indicates that the effect of UV polymerization on lateral diffusion in a dienoyl PSLB is similar to the transition from a Ld phase to a Lo phase. The partial retention of fluidity in UV-polymerized PSLBs, their enhanced stability, and the activity of incorporated transmembrane proteins and peptides is discussed.

Construction of a smart temperature-responsive GPx mimic based on the self-assembly of supra-amphiphiles

Glutathione peroxidase (GPx) is a major defense against hydroperoxides as a kind of seleno-enzyme that protects cells from oxidative damage. A supramolecular vesicle with controllable GPx activity and morphology has been successfully constructed by the self-assembly of supra-amphiphiles formed by host-guest recognition between cyclodextrin and adamantane derivatives. By introducing thermosensitive poly(N-isopropylacrylamide) (PNIPAM) scaffolds and the catalytic moiety selenium into adamantane and cyclodextrin, respectively, the complex of catalysis-functionalized cyclodextrin with thermosensitivity-functionalized adamantane directed the formation of a supramolecular vesicle which acted as a GPx mimic at 37 °C. The self-assembled nanoenzyme exhibited an obvious temperature responsive characteristic and high GPx-like catalytic activity promoting the reduction of hydrogen peroxide (H2O2) with glutathione (GSH) as the reducing substrate at 37 °C. However, the vesicle disassembled when the temperature decreased to 25 °C due to the transition of PNIPAM between the coil and the globule. Interestingly, the catalytic activity changed along with the transformation of morphologies. The vesicle structure self-assembled at 37 °C provided the favorable microenvironment for the enzymatic reaction, hence we successfully developed a temperature-responsive nanoenzyme model. Moreover, the catalytic activity of the thermosensitive GPx mimic exhibited excellent reversibility and typical saturation kinetics behaviour similar to a natural enzyme catalyst. It is assumed that the proposed GPx model not only has remarkable advantages such as easy functionalization and facile preparation but also provided a new way to develop intelligent responsive materials.

Formation of lipid membrane-incorporated small π-molecules bearing hydrophilic groups

Lipid membrane-incorporated π-conjugated guest molecules (LMIGs) have been classified into four categories, including stable LMIGs, the precipitation or dissolution of some of the guest molecules from the LMIGs and the formation of small aggregates.

Construction of pillar[6]arene-based CO2 and UV dual-responsive supra-amphiphile and application in controlled self-assembly

A gas and photo dual-responsive host–guest recognition was established in an aqueous medium. This recognition motif was further applied for the construction of a supra-amphiphile, which reversibly self-assembled into vesicles upon UV/vis irradiation or bubbling with N₂/CO₂.

Different stabilities of liposomes containing saturated and unsaturated lipids toward the addition of cyclodextrins

The liposomal collapse resulting from the addition of heptakis(2,6-di-O-methyl)cyclodextrin was more difficult to observe in the presence of unsaturated lipids compared to saturated lipids.

Monitoring the Competence of a New Keto-tetrahydrocarbazole Based Fluorosensor Under Homogeneous, Micro-Heterogeneous and Serum Albumin Environments

We present here a detailed photophysical study of a recently synthesised fluorophore 8-methyl-8,9-dihydro-5H-[1,3]dioxolo[4,5-b]carbazol-6(7H)-one. This is a synthetic precursor of bio-active carbazole skeleton Clausenalene. Spectroscopic investigation of the fluorophore has been carried out in different protic and aprotic solvents, as well as in binary solvent mixtures, using absorption, steady-state and time-resolved fluorescence techniques. This fluorophore is particularly responsive to the hydrogen bonding nature as well as polarity of the solvent molecules. When considered in micelles and β-cyclodextrin, this behaves as a reporter of its immediate microenvironment. Steady state and time resolved fluorometric and circular dichroism techniques have been used to explore the binding interaction of the fluorophore with transport proteins, bovine serum albumin and human serum albumin. The probable binding sites of the fluorophore in the proteinous environments have been evaluated from fluorescence resonance energy transfer study. Laser flash photolysis experiments also have been performed to observe the triplet excited state interaction between the fluorophore and albumin proteins.

Supramolecular polymeric vesicles formed by p-sulfonatocalix[4]arene and chitosan with multistimuli responses

Supramolecular polymeric vesicles are constructed by the complexation of p-sulfonatocalix[4]arene and chitosan, where the multivalent electrostatic interactions between the anionic sulfonate tetramer and cationic polyammoniums served as the dominant driving force. The supra-amphiphilic assemblies are disassembled upon exposure to a pH stimulus since the partial deprotonation of chitosan accompanied by a pH increase. Adding a competitive guest can also disrupt the assembly, representing the host-guest inclusion response. Interestingly, an abnormal temperature-response is observed, possibly as a result of the temperature-directed fusion process.

Development of an aquacatalytic system based on the formation of vesicles of an amphiphilic palladium NNC-pincer complex

Two amphiphilic palladium NNC-pincer complexes bearing hydrophilic tri(ethylene glycol) chains and hydrophobic dodecyl chains were designed and prepared for the development of a new aquacatalytic system.

Liposome collapse resulting from an allosteric interaction between 2,6-dimethyl-β-cyclodextrins and lipids

The addition of a large excess of heptakis(2,6-di-O-methyl)-β-cyclodextrin (DMe-β-CDx) led to the collapse of several liposomes via the formation of water-soluble lipid–DMe-β-CDx complex with allosteric interactions.

Facile fabrication of cross-linked vesicle via “surface clicking” of calixarene-based supra-amphiphiles

A cross-linked binary vesicle was constructed by calixarene-induced aggregation followed by a “click” reaction, showing improved performance over a dynamic vesicle.

Palladium–gold bimetallic nanoparticle catalysts prepared by “controlled release” from metal-loaded interfacially cross-linked reverse micelles

Bimetallic Pd–Au nanoparticles prepared by a novel method were active catalysts for green oxidation of alcohol in water.