Density Functional Theory-Computed Mechanisms of Ethylene and Diethyl Ether Formation from Ethanol on γ-Al2O3(100)

Shape-Selective Alkylation of Toluene with Ethanol over a Twin Intergrowth Structured ZSM-5: Modulation of Acidity and Diffusivity via Interface Engineering

ZSM-5 zeolites with modified acidity and diffusivity are employed as catalysts for the shape-selective alkylation of toluene with ethanol to para-ethyltoluene (p-ET). To avoid pore blocking and loss of active sites caused by traditional methods of enhancing para-selectivity using modifiers, here, we constructed twin intergrowth structured ZSM-5 (Z5-T), achieving modulation of the inherent acidity and diffusivity through interface engineering. The characterization results demonstrate that due to the intergrowth interface, the Z5-T catalyst forms more inherent Lewis acid sites and also renders more sinusoidal channels opened to the surface. Z5-T with an appropriate acidity and enhanced shape-selectivity inhibits side reactions such as isomerization and coke formation, demonstrating improved p-ET selectivity (>90%) and catalytic stability (>200 h) in the alkylation of toluene with ethanol.

A multi-faceted structural, thermodynamic, and spectroscopic approach for investigating ethanol dehydration over transition phase aluminas

The surface-catalyzed dehydration of ethanol over transition phase aluminas was studied using a multi-faceted structural and thermodynamic characterization approach, which enabled a detailed examination of the reaction mechanism using INS.

Tuning the catalytic acidity in Al2O3 nanofibers with mordenite nanocrystals for dehydration reactions

Alumina (Al2O3) is one of the most used supports in the chemical industry due to its exceptional thermal stability, surface area, and acidic properties. Mesoscopic structured alumina with adequate acidic properties is important in catalysis to enhance the selectivity and conversion of certain reactions and processes. This study introduces a synthetic method based on electrospinning to produce Al2O3 nanofibers (ANFs) with zeolite mordenite (MOR) nanocrystals (hereafter, hybrid ANFs) to tune the textural and surface acidity properties. The hybrid ANFs with electrospinning form a non-woven network with macropores. ANF-HMOR, i.e., ANFs containing protonated mordenite (HMOR), shows the highest total acidity of ca. 276 μmol g-1 as determined with infrared spectroscopy using pyridine as a molecular probe (IR-Py). IR-Py results reveal that Lewis acid sites are prominently present in the hybrid ANFs. Brønsted acid sites are also observed in the hybrid ANFs and are associated with the HMOR presence. The functionality of hybrid ANFs is evaluated during methanol dehydration to dimethyl ether (DME). The proof of concept reaction reveals that ANF-HMOR is the more active and selective catalyst with 87% conversion and nearly 100% selectivity to DME at 573 K. The results demonstrate that the textural properties and the acid site type and content can be modulated in hybrid ANF structures, synergistically improving the selectivity and conversion during the methanol dehydration reaction. From a broader perspective, our results promote the utilization of hybrid structural materials as a means to tune chemical reactions selectively.

Morphology dependent effect of γ-Al2O3 for ethanol dehydration: nanorods and nanosheets

γ-Al2O3 nanorods gave the improved selectivity of C2H4 in ethanol dehydration due to the selective exposure of {100} facets.

Pair Sites on Nodes of Metal-Organic Framework hcp UiO-66 Catalyze tert-Butyl Alcohol Dehydration

On metal oxide cluster nodes of metal-organic frameworks (MOFs), sites not bonded to linkers (e.g., defects and structural vacancies) control reactivity and catalysis. Attention has been focused on isolated, individual sites, but pair sites have been largely overlooked. We now show that the MOF hcp UiO-66, which incorporates dimeric Zr₆O₈ nodes bridged by μ₂-OH groups, is an excellent platform for identifying and controlling adjacent sites consisting of OH groups and Zr⁴⁺ sites, which catalyze tert-butyl alcohol dehydration much more rapidly than isolated single sites.

Diethyl Ether Conversion to Ethene and Ethanol Catalyzed by Heteropoly Acids

The conversion of diethyl ether (DEE) to ethene and ethanol was studied at a gas-solid interface over bulk and supported Brønsted solid acid catalysts based on tungsten Keggin heteropoly acids (HPAs) at 130-250 °C and ambient pressure. The yield of ethene increased with increasing reaction temperature and reached 98% at 220-250 °C (WHSV = 2.2 h^-1). The most active HPA catalysts were silica-supported H₃PW₁₂O₄₀ and H₄SiW₁₂O₄₀ and the bulk heteropoly salt Cs₂.₅H₀.₅PW₁₂O₄₀. The HPA catalysts outperformed zeolites HZSM-5 and USY reported elsewhere. A correlation between catalyst activity and catalyst acid strength was established, which indicates that Brønsted acid sites play an important role in DEE elimination over HPA catalysts. The results point to the reaction occurring through the consecutive reaction pathway: DEE → C₂H₄ + EtOH followed by EtOH → C₂H₄ + H₂O, where ethene is both a primary product of DEE elimination and a secondary product via dehydration of the primary product EtOH. Evidence is provided that DEE elimination over bulk HPA and high-loaded HPA/SiO₂ catalysts proceeds via the surface-type mechanism.

Predicting the Energetics of Hydrogen Intercalation in Metal Oxides Using Acid-Base Properties

The ability to predict intercalation energetics from first principles is attractive for identifying candidate materials for energy storage, chemical sensing, and catalysis. In this work, we introduce a computational framework that can be used to predict the thermodynamics of hydrogen intercalation in tungsten trioxide (WO₃). Specifically, using density functional theory (DFT), we investigated intercalation energetics as a function of adsorption site and hydrogen stoichiometry. Site-specific acid-base properties determined using DFT were used to develop linear structure screening models that informed a kernel ridge energy prediction model. These regressions provided a series of hydrogen binding energy predictions across stoichiometries ranging from WO₃ to H_0.625WO₃, which were then converted to equilibrium potentials for hydrogen intercalation. Experimental validation using cyclic voltammetry measurements yielded good agreement with the predicted intercalation potentials. This methodology enables fast exploration of a large geometric configuration space and reveals an intuitive physical relationship between acidity, basicity, and the thermodynamics of hydrogen intercalation. Furthermore, the combination of theoretical and experimental results suggests H_0.500WO₃ as a maximum stable stoichiometry for the bronzes that arises from competition with hydrogen evolution rather than the inability of WO₃ to accommodate additional hydrogen. Our experimental results further indicate hydrogen insertion in WO₃ is highly irreversible for low H-stoichiometries, which we propose to be a consequence of the semiconductor-to-metal transition that occurs upon initial H-intercalation. Overall, the agreement between theory and experiment suggests that local acid-base characteristics govern hydrogen intercalation in tungsten trioxide, and this insight can aid the accelerated discovery of redox-active metal oxides for catalytic hydrogenations.

Ethanol-ethylene conversion mechanism on hydrogen boride sheets probed by in situ infrared absorption spectroscopy

Two-dimensional hydrogen boride (HB) sheets were recently demonstrated to act as a solid acid catalyst in their hydrogen-deficient state. However, both the active sites and the mechanism of the catalytic process require further elucidation. In this study, we analyzed the conversion of ethanol adsorbed on HB sheets under vacuum during heating using in situ Fourier transform infrared (FT-IR) absorption spectroscopy with isotope labelling. Up to 450 K, the FT-IR peak associated with the OH group of the adsorbed ethanol molecule disappeared from the spectrum, which was attributed to a dehydration reaction with a hydrogen atom from the HB sheet, resulting in the formation of an ethyl species. At temperatures above 440 K, the number of BD bonds markedly increased in CD₃CH₂OH, compared to CH₃CD₂OH; the temperature dependence of the formation rate of BD bonds was similar to that of the dehydration reaction rate of ethanol on HB sheets under steady-state conditions. The rate-determining step of the dehydration of ethanol on HB was thus ascribed to the dehydrogenation of the methyl group of the ethyl species on the HB sheets, followed by the immediate desorption of ethylene. These results show that the catalytic ethanol dehydration process on HB involves the hydrogen atoms of the HB sheets. The obtained mechanistic insights are expected to promote the practical application of HB sheets as catalysts.

Surface chemistry dictates stability and oxidation state of supported single metal catalyst atoms

Single atom catalysts receive considerable attention due to reducing noble metal utilization and potentially eliminating certain side reactions. Yet, the rational design of highly reactive and stable single atom catalysts is hampered by the current lack of fundamental insights at the single atom limit. Here, density functional theory calculations are performed for a prototype reaction, namely CO oxidation, over different single metal atoms supported on alumina. The governing reaction mechanisms and scaling relations are identified using microkinetic modeling and principal component analysis, respectively. A large change in the oxophilicity of the supported single metal atom leads to changes in the rate-determining step and the catalyst resting state. Multi-response surfaces are introduced and built cheaply using a descriptor-based, closed form kinetic model to describe simultaneously the activity, stability, and oxidation state of single metal atom catalysts. A double peaked volcano in activity is observed due to competing rate-determining steps and catalytic cycles. Reaction orders of reactants provide excellent kinetic signatures of the catalyst state. Importantly, the surface chemistry determines the stability, oxidation, and resting state of the catalyst.

The competition between dehydrogenation and dehydration reactions for primary and secondary alcohols over gallia: unravelling the effects of molecular and electronic structure via a two-pronged theoretical/experimental approach

The relative dehydrogenation/dehydration reactivity imparted by nanostructured gallium(iii) oxide on alcohols was investigated via electronic structure calculations, reactivity tests and DRIFT-IR spectroscopy.

Improving alkane dehydrogenation activity on γ-Al2O3 through Ga doping

Doping the surface of γ-Al₂O₃ with gallium enhances the alkane dehydrogenation catalytic activity.

Hydrogenated Borophene Shows Catalytic Activity as Solid Acid

Hydrogen boride (HB) or hydrogenated borophene sheets are recently realized two-dimensional materials that are composed of only two light elements, boron and hydrogen. However, their catalytic activity has not been experimentally analyzed. Herein, we report the catalytic activity of HB sheets in ethanol reforming. HB sheets catalyze the conversion of ethanol to ethylene and water above 493 K with high selectivity, independent of the contact time, and with an apparent activation energy of 102.8 ± 5.5 kJ/mol. Hence, we identify that HB sheets act as solid-acid catalysts.

Synthesis of Biomass-Derived Ethers for Use as Fuels and Lubricants

Ethers synthesized from biomass-derived compounds have exceptional properties as fuels, lubricants, and specialty chemicals and can serve as replacements for petroleum-derived products. Recent efforts have identified heterogeneous catalysts for the selective synthesis of ethers from alcohols, aldehydes, ketones, furans, esters, olefins, carboxylic acids, and other molecules derived from biomass. This Review highlights the scope of etherification reactions and provides insights into the choice of catalysts and reaction conditions best suited for producing targeted ethers from the available starting materials. First, the properties of ethers for specific applications and the methods by which synthons for ether synthesis can be obtained from biomass are discussed. Then the progress that has been made on the synthesis of ethers via the following methods is summarized: direct etherification of alcohols; reductive etherification of alcohols with aldehydes or ketones; etherification of furanic compounds, esters, and carboxylic acids; and the addition of alcohols to olefins. Next, the mechanisms of these reactions and catalyst properties required to promote them are discussed, with the goal of understanding how reaction conditions can be tuned to optimize catalyst activity and selectivity towards desired ethers. The Review closes by examining the tradeoffs between catalyst selectivity, activity, stability, and reaction conditions required to achieve the most economically and environmentally favorable routes to biomass-derived ethers.

Application of modulation excitation-phase sensitive detection-DRIFTS for in situ/operando characterization of heterogeneous catalysts

A new more general method and guidelines for the implementation of modulation excitation-phase sensitive detection-diffuse reflectance Fourier transform spectroscopy (ME-PSD-DRIFTS).

Scavenging performance and antioxidant activity of γ-alumina nanoparticles towards DPPH free radical: Spectroscopic and DFT-D studies

The radical scavenging performance and antioxidant activity of γ-alumina nanoparticles towards 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical were investigated by spectroscopic and computational methods. The radical scavenging ability of γ-alumina nanoparticles in the media with different polarity (i.e. i-propanol and n-hexane) was evaluated by measuring the DPPH absorbance in UV-Vis absorption spectra. The structure and morphology of γ-alumina nanoparticles before and after adsorption of DPPH were studied using XRD, FT-IR and UV-Vis spectroscopic techniques. The adsorption of DPPH free radical on the clean and hydrated γ-alumina (1 1 0) surface was examined by dispersion corrected density functional theory (DFT-D) and natural bond orbital (NBO) calculations. Also, time-dependent density functional theory (TD-DFT) was used to predict the absorption spectra. The adsorption was occurred through the interaction of radical nitrogen N and NO₂ groups of DPPH with the acidic and basic sites of γ-alumina surface. The high potential for the adsorption of DPPH radical on γ-alumina nanoparticles was investigated. Interaction of DPPH with Brønsted and Lewis acidic sites of γ-alumina was more favored than Brønsted basic sites. The following order for the adsorption of DPPH over the different active sites of γ-alumina was predicted: Brønsted base < Lewis acid < Brønsted acid. These results are of great significance for the environmental application of γ-alumina nanoparticles in order to remove free radicals.

Design of highly selective ethanol dehydration nanocatalysts for ethylene production

Rational design of catalysts for selective conversion of alcohols to olefins is key since product selectivity remains an issue due to competing etherification reactions. Using first principles calculations and chemical rules, we designed novel metal-oxide-protected metal nanoclusters (M₁₃X₄O₁₂, with M = Cu, Ag, and Au and X = Al, Ga, and In) exhibiting strong Lewis acid sites on their surface, active for the selective formation of olefins from alcohols. These symmetrical nanocatalysts, due to their curvature, show unfavorable etherification chemistries, while favoring the olefin production. Furthermore, we determined that water removal and regeneration of the nanocatalysts is more feasible compared to the equivalent strong acid sites on solid acids used for alcohol dehydration. Our results demonstrate an exceptional stability of these new nanostructures with the most energetically favorable being Cu-based. Thus, the high selectivity and stability of these in-silico-predicted novel nanoclusters (e.g. Cu₁₃Al₄O₁₂) make them attractive catalysts for the selective dehydration of alcohols to olefins.