Hydrogen Production by Selective Dehydrogenation of HCOOH Catalyzed by Ru-Biaryl Sulfonated Phosphines in Aqueous Solution

Heterogeneous Oxidase-Type Catalysis for H2 Generation at Low Temperatures

The long-term objective in the field of heterogeneous catalysis is to develop an enzyme-like catalytic pathway that can achieve exceptional catalytic performance even at low temperatures. Herein, we have demonstrated a heterogeneous oxidase-type catalysis on the ZnO-supported Ru clusters (Ru/ZnO) for efficient H2 generation from an aqueous solution of formaldehyde (HCHO) at low temperatures. Due to its unique reaction pathway, the Ru/ZnO catalysts exhibited a temperature-insensitive activity for H2 generation at the temperature of 15 to 45 °C. Remarkably, even at a low temperature of 5 °C, the Ru/ZnO catalysts still enabled an H2 generation rate of 13.8 mmol gcat-1 h-1 with a turnover frequency (TOF) of 1678 h-1. Additionally, instead of producing a CO2/CO molecule, the HCHO molecule underwent a transformation into formic acid and/or formate as the byproduct. This finding presents a novel class of heterogeneous catalysts to expand the potential application scenarios of liquid hydrogen storage and transportation systems.

Improving yields by switching central metal ions in porphyrazine-catalyzed oxidation of glucose into value-added organic acids with SnO2 in aqueous solution

Photocatalysis has exhibited huge potential in selective conversion of glucose into value-added chemicals. Therefore, modulation of photocatalytic material for selective upgrading of glucose is significant. Here, we have investigated the insertion of different central metal ions, Fe, Co, Mn, and Zn, into porphyrazine loading with SnO2 for access to more efficient transformation of glucose into value-added organic acids in aqueous solution at mild reaction conditions. The best selectivity for organic acids containing glucaric acid, gluconic acid, and formic acid of 85.9% at 41.2% glucose conversion was attained by using the SnO2/CoPz composite after reacting for 3 h. The effects of central metal ions on surficial potential and related possible factors have been studied. Experimental results showed that the introduction of metalloporphyrazine with different central metal ions on the surface of SnO2 has a significant effect on the separation of photogenerated charges, changing the adsorption and desorption of glucose and products on the catalyst surface. The central metal ions of cobalt and iron contributed more to the positive effects toward enhancing conversion of glucose and yields of products, and manganese and zinc contributed more to the negative effects, resulting in the poor yield of products. The differences from the central metals may attribute to the surficial potential change of the composite and the coordination effects between the metal and oxygen atom. An appropriate surficial potential environment of the photocatalyst may achieve a better interactive relationship between the catalyst and reactant, while appropriate ability of producing active species matched with adsorption and desorption abilities would gain a better yield of products. These results have provided valued ideas for designing more efficient photocatalysts in selective oxidation of glucose utilizing clean solar energy in the future.

Diruthenium Catalyst for Hydrogen Production from Aqueous Formic Acid

Diruthenium complexes [{(η⁶-arene)RuCl}₂(μ-κ²:κ²-benztetraimd)]²⁺ containing the bridging bis-imidazole methane-based ligand {1,4-bis(bis(2-ethyl-5-methyl-1H-imidazol-4-yl)methyl)benzene} (benztetraimd) are synthesized for catalytic formic acid dehydrogenation in water at 90 °C. Catalyst [{(η⁶-p-cymene)RuCl}₂(μ-κ²:κ²-benztetraimd)]²⁺ [1-Cl₂] exhibited a remarkably high turnover frequency (1993 h^-1 per Ru atom) and long-term stability over 60 days for formic acid dehydrogenation, while the analogous (η⁶-benzene)diruthenium and mononuclear catalysts displayed low activity with poor long-term stability. Notably, catalyst [1-Cl₂] also displayed an appreciably high turnover number of 93 200 for the bulk-scale reaction. In addition, the in-depth mass and nuclear magnetic resonance investigations under the catalytic and control experimental conditions revealed the active involvement of several crucial catalytic intermediate species, such as Ru-aqua species [{(η⁶-p-cymene)Ru(H₂O)}₂(μ-L)]²⁺ [1-(OH₂)₂], Ru-formato species [{(η⁶-p-cymene)Ru(HCOO)}₂(μ-L)] [1-(HCOO)₂], and Ru-hydrido species [{(η⁶-p-cymene)Ru(H)}₂(μ-L)] [1-(H)₂], in the catalytic formic acid dehydrogenation reaction.

Controlled synthesis of Ru-single-atoms on ordered mesoporous phosphine polymers for microwave-assisted conversion of biomass-derived sugars to artificial sweeteners

Atomically dispersed metal-single-atoms have become a frontier in solid catalysis due to their characteristic electronic properties. However, for biomass conversion, employing metal-single-atoms as catalysts is rather challenging since they suffer from poor selectivity and yield due to inadequate metal-support interactions. We show here that Ru/triphenylphosphine (PPh)-based ordered mesoporous polymers afford high yields of reduced sugars, xylitol (yield ∼95%) and sorbitol (yield ∼65%) in a microwave reactor with formic acid as the only hydrogen donor. We have established a unique relationship within Ru/triphenylphosphine that shows an important ligand effect, in contrast to, Ru/triphenylamine and Ru/catechol. The tailored electronic properties in Ru/phosphine were thoroughly examined by using state-of-the-art experimental techniques viz. EXAFS, XANES, XPS, DRIFTS and HAADF-STEM. The resulting phosphine-modified catalysts show a promotion in activity and selectivity towards less vulnerable aldehydes for hydrogenation, further confirmed by DFT calculations. This finding reveals a new protocol to tailor the activity of metal-single-atoms utilizing functional porous polymers as nanoreactors.

Bis-Imidazole Methane Ligated Ruthenium(II) Complexes: Synthesis, Characterization, and Catalytic Activity for Hydrogen Production from Formic Acid in Water

A series of half sandwich arene-ruthenium complexes [(η⁶-arene)RuCl(κ²-L)]⁺ ([Ru]-1-[Ru]-10) containing bis-imidazole methane-based ligands {4,4'-(phenylmethylene)bis(2-ethyl-5-methyl-1H-imidazole)} (L1), {4,4'-((4-methoxyphenyl)methylene)bis(2-ethyl-5-methyl-1H-imidazole)} (L2), {4,4'-((2-methoxyphenyl)methylene)bis(2-ethyl-5-methyl-1H-imidazole)} (L3), {4,4'-((4-chlorophenyl)methylene)bis(2-ethyl-5-methyl-1H-imidazole)} (L4), and {4,4'-((2-chlorophenyl)methylene)bis(2-ethyl-5-methyl-1H-imidazole)} (L5) are synthesized. The synthesized and purified complexes ([Ru]-1-[Ru]-10) are further employed for hydrogen production from formic acid in aqueous medium. Among the investigated complexes, [(η⁶-p-cymene)RuCl(κ²-L2)]⁺ [Ru]-2, having Ru(II) coordinated 4-methoxy phenyl substituted bis-imidazole methane ligand (L2), outperformed over others, displaying a higher catalytic turnover of 8830 and high efficiency (TOF = 1545 h^-1) with appreciably high long-term stability for formic acid dehydrogenation in water.

Formic Acid as a Potential On-Board Hydrogen Storage Method: Development of Homogeneous Noble Metal Catalysts for Dehydrogenation Reactions

Hydrogen can be used as an energy carrier for renewable energy to overcome the deficiency of its intrinsically intermittent supply. One of the most promising application of hydrogen energy is on-board hydrogen fuel cells. However, the lack of a safe, efficient, convenient, and low-cost storage and transportation method for hydrogen limits their application. The feasibility of mainstream hydrogen storage techniques for application in vehicles is briefly discussed in this Review. Formic acid (FA), which can reversibly be converted into hydrogen and carbon dioxide through catalysis, has significant potential for practical application. Historic developments and recent examples of homogeneous noble metal catalysts for FA dehydrogenation are covered, and the catalysts are classified based on their ligand types. The Review primarily focuses on the structure-function relationship between the ligands and their reactivity and aims to provide suggestions for designing new and efficient catalysts for H₂ generation from FA.

Recent Advances in Photocatalytic Transformation of Carbohydrates Into Valuable Platform Chemicals

In response to the less accessible fossil resources and deteriorating environmental problems, catalytic conversion of the abundant and renewable lignocellulosic biomass to replace fossil resources for the production of value-added chemicals and fuels is of great importance. Depolymerization of carbohydrate and its derivatives can obtain a series of C5-C6 monosaccharides (e.g., glucose and xylose) and their derived platform compounds (e.g., HMF and furfural). Selective transformation of lignocellulose using sustainable solar energy via photocatalysis has attract broad interest from a growing scientific community. The unique photogenerated reactive species (e.g., h+, e−, •OH, •O2−, and 1O2), novel reaction pathways as well as the mild reaction conditions make photocatalysis a “dream reaction.” This review is aimed to provide an overview of the up-to-date contributions achieved in the selective photocatalytic transformation of carbohydrate and its derivatives. Photocatalytic methods, properties and merits of different catalytic systems are well summarized. We then put forward future perspective and challenges in this field.

Synthesis of Hydrophilic Phosphorus Ligands and Their Application in Aqueous-Phase Metal-Catalyzed Reactions

Transition metal-catalyzed reactions in aqueous media are experiencing a constant increase in interest. In homogenous catalysis the use of water as a solvent offers advantages in cost, safety, the possibility of two-phase catalysis and simplified separation strategies. In the life sciences, transition metal catalysis in aqueous systems enables the ligation or modification of biopolymers in buffer systems or even in their cellular environment. In biocatalysis, aqueous systems allow the simultaneous use of enzymes and transition metal catalysts in cascade reactions. The use of water-soluble phosphine ligands still represents the most reliable and popular strategy for transferring metal catalysts into the aqueous phase. This review summarizes the recent advancements in this field since 2009 and describes current synthetic strategies for the preparation of hydrophilic phosphines and phosphites. In addition, recent applications of transition metal catalysis in aqueous solvents using these hydrophilic ligands are presented.

Hydrogen Generation from Catalytic Reforming of Paraformaldehyde and Water by Polymeric Bifunctional Catalysts Comprising Ruthenium and Sulfonic Acid Units

As a clean and sustainable source of energy, hydrogen shows great potential to be the ultimate energy source in future. In this research, paraformaldehyde is used as hydrogen carrier. Several bifunctional catalysts are prepared for the hydrogen generation from paraformaldehyde. The bifunctional catalysts contain two catalytically active sites. One is a sulfonic acid group for paraformaldehyde hydrolysis, and the other is an organometallic group that catalyzes the hydrogen release from formaldehyde. Bifunctional iridium catalysts and bifunctional rhodium catalysts could only generate traces of hydrogen in the initial phase of paraformaldehyde decomposition. Only the bifunctional ruthenium catalyst shows high activity due to its bifunctional catalytically active sites, thus more than 98.0 % of the initially produced gas contains hydrogen. The initial TOF is 685 h^-1 at 363 K when the paraformaldehyde concentration is 20 wt%. A reaction mechanism is proposed for the hydrogen generation from paraformaldehyde in which formaldehyde and formic acid are intermediates Formic acid decomposition is the rate-determining step in the later phase of paraformaldehyde decomposition.

Investigating the reactivity of neutral water-soluble Ru(ii)-PTA carbonyls towards the model imine ligands pyridine and 2,2'-bipyridine

As a continuation of our strategy for preparing new Ru(ii) precursors to be exploited as building blocks in the construction of metal-mediated supramolecular assemblies with improved solubility in water, here we describe the reactivity of selected neutral Ru(ii)-PTA carbonyls (PTA = 1,3,5-triaza-7-phosphaadamantane) towards the model imine ligands pyridine (py) and 2,2'-bipyridine (bpy) and the preparation and characterization of several neutral and cationic water-soluble derivatives: trans,trans,trans-[RuCl2(CO)(py)(PTA)2] (7), cis,cis,trans-[RuCl2(CO)2(py)(PTA)] (9), cis,trans-[Ru(bpy)Cl(CO)(PTA)2]Cl (10), mer-[Ru(bpy)(CO)(PTA)3](Cl)2 (12), cis,trans-[Ru(bpy)(CO)2Cl(PTA)]Cl (13), cis,trans-[Ru(bpy)(CO)2(PTA)2](NO3)2 (14NO3). In addition, we found that light-induced isomerization in some bpy compounds could be induced. The following species, either side-products isolated in low yield or compounds obtained exclusively in solution, were also unambiguously identified: cis,cis,trans-[RuCl2(CO)(py)(PTA)2] (8), trans-[RuCl2(bpy)(CO)(PTA)] (11), cis,cis-[Ru(bpy)Cl(CO)(PTA)2]Cl (15) and cis,cis-[Ru(bpy)(CO)2Cl(PTA)]Cl (16). The X-ray structures of 7, 11·H2O, and 12·7H2O are also reported. All compounds are new and - with few exceptions - show a good solubility in water.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

Cooperative Effects of Heterodinuclear IrIII-MII Complexes on Catalytic H2 Evolution from Formic Acid Dehydrogenation in Water

Novel heterodinuclear Ir^III-M^II complexes (M = Co, Ni, or Cu) with two adjacent reaction sites were synthesized by using 3,5-bis(2-pyridyl)-pyrazole (Hbpp) as a structure-directing ligand and employed as catalysts for H₂ evolution through formic acid dehydrogenation in water. A cooperative effect of the hetero-metal centers was observed in the H₂ evolution in comparison with the corresponding mononuclear Ir^III and M^II complexes as the components of the Ir^III-M^II complexes. The H₂ evolution rate for the Ir^III-M^II complexes was at most 350-fold higher than that of the mononuclear Ir^III complex. The catalytic activity increased in the following order: Ir^III-Cu^II complex < Ir^III-Co^II complex < Ir^III-Ni^II complex . The Ir^III-H intermediates of the Ir^III-M^II complexes were successfully detected by ultraviolet-visible, ¹H nuclear magnetic resonance, and ESI-TOF-MS spectra. The catalytic enhancement of H₂ evolution by the Ir^III-M^II complexes indicates that the Ir^III-H species formed in the Ir^III moiety act as reactive species and the M^II moieties act as acceleration sites by the electronic effect from the M^II center to the Ir^III center through the bridging bpp^- ligand. The Ir^III-M^II complexes may also activate H₂O at the 3d M^II centers as a proton source to facilitate H₂ evolution. In addition, the affinity of formate for the Ir^III-M^II complexes was investigated on the basis of Michaelis-Menten plots; the Ir^III-Co^II and Ir^III-Ni^II complexes exhibited affinities that were relatively higher than that of the Ir^III-Cu^II complex. The catalytic mechanism of H₂ evolution by the Ir^III-M^II complexes was revealed on the basis of spectroscopic detection of reaction intermediates, kinetic analysis, and isotope labeling experiments.

Cobalt-Catalyzed Aqueous Dehydrogenation of Formic Acid

Among the known liquid organic hydrogen carriers, formic acid attracts increasing interest in the context of safe and reversible storage of hydrogen. Here, the first molecularly defined cobalt pincer complex is disclosed for the dehydrogenation of formic acid in aqueous medium under mild conditions. Crucial for catalytic activity is the use of the specific complex 3. Compared to related ruthenium and manganese complexes 7 and 8, this optimal cobalt complex showed improved performance. DFT computations support an innocent non-classical bifunctional outer-sphere mechanism on the triplet state potential energy surface.

Anchoring Pt Single Atoms on Te Nanowires for Plasmon-Enhanced Dehydrogenation of Formic Acid at Room Temperature

Formic acid (HCOOH), as a promising hydrogen carrier, is renewable, safe, and nontoxic. However, the catalytic dehydrogenation of HCOOH is typically conducted at elevated temperature. Here, HCOOH decomposition is successfully achieved for hydrogen production on the developed Pt single atoms modified Te nanowires with the Pt mass loading of 1.1% (1.1%Pt/Te) at room temperature via a plasmon-enhanced catalytic process. Impressively, 1.1%Pt/Te delivers 100% selectivity for hydrogen and the highest turnover frequency number of 3070 h-1 at 25 °C, which is significantly higher than that of Pt single atoms and Pt nanoclusters coloaded Te nanowires, Pt nanocrystals decorated Te nanowires, and commercial Pt/C. A plasmonic hot-electron driven mechanism rather than photothermal effect domains the enhancement of catalytic activity for 1.1%Pt/Te under light. The transformation of HCOO* to CO2 δ -* on Pt atoms is proved to be the rate-determining step by further mechanistic studies. 1.1%Pt/Te exhibits tremendous catalytic activity toward the decomposition of HCOOH owing to its plasmonic hot-electron driven mechanism, which efficiently stimulates the rate-determining step. In addition, hot electrons generated by the Te atoms nearby Pt single atoms are regarded to directly inject into the reactants adsorbed and activated on Pt single atoms.

Highly Efficient Base-Free Dehydrogenation of Formic Acid at Low Temperature

The ruthenium complex [RuH₂ (PPh₃ )₄ ] is a competent catalyst for the selective dehydrogenation of formic acid (FA) at low temperature. It tolerates water and shows excellent performance (TOF up to 36 000 h^-1 at 60 °C). Remarkably, no basic additives are necessary to obtain such high activity and the defined complex is stable for up to 120 days, making this system one of the most effective formic acid dehydrogenation catalysts known to date.

Photocatalytic Dehydrogenation of Formic Acid on CdS Nanorods through Ni and Co Redox Mediation under Mild Conditions

Selective release of hydrogen from formic acid (FA) is deemed feasible to solve issues associated with the production and storage of hydrogen. Here, we present a new efficient photocatalytic system consisting of CdS nanorods (NRs), Ni, and Co to liberate hydrogen from FA. The optimized noble-metal-free catalytic system employs Ni/Co as a redox mediator to relay electrons and holes from CdS NRs to the Ni and Co, respectively, which also deters the oxidation of CdS NRs. As a result, a high hydrogen production activity of 32.6 mmol h^-1  g^-1 from the decomposition of FA was noted. Furthermore, the photocatalytic system exhibits sustained H₂ production rate for 12 h with sequential turnover numbers surpassing 4×10³ , 3×10³ , and 2×10³ for Co-Ni/CdS NRs, Ni/CdS NRs, and CoCl₂ /CdS NRs, respectively.

Towards Hydrogen Storage through an Efficient Ruthenium-Catalyzed Dehydrogenation of Formic Acid

Hydrogen is of fundamental importance for the construction of modern clean-energy supply systems. In this context, the catalytic dehydrogenation of formic acid (FA) is a convenient method to generate H₂ gas from an easily available liquid. One of the issues associated with current catalytic dehydrogenation systems is insufficient stability. Here, we present a robust and recyclable system for FA dehydrogenation by combining a ruthenium 1,1,1-tris(diphenylphosphinomethyl)ethane complex and aluminum trifluoromethanesulfonate (Al(OTf)₃ ). This robust system allows steady H₂ production under pressure and recycling for an additional 14 runs without any apparent loss of activity (turnover frequencies up to 1920 h^-1 , turnover numbers up to 20 000). Notably, the catalyst can also be used for the dehydrogenation of formates and the reverse hydrogenation of bicarbonates and CO₂ .

DFT study of CO2 hydrogenation catalyzed by a cobalt-based system: an unexpected formate anion-assisted deprotonation mechanism

An unexpected formate anion-assisted deprotonation mechanism is unfolded by a DFT study of CO₂ hydrogenation catalyzed by a cobalt-based system.

Ruthenium PNN(O) Complexes: Cooperative Reactivity and Application as Catalysts for Acceptorless Dehydrogenative Coupling Reactions

The novel tridentate PNNOH pincer ligand LH features a reactive 2-hydroxypyridine functionality as well as a bipyridyl-methylphosphine skeleton for meridional coordination. This proton-responsive ligand coordinates in a straightforward manner to RuCl(CO)(H)(PPh3)3 to generate complex 1. The methoxy-protected analogue LMe was also coordinated to Ru(II) for comparison. Both species have been crystallographically characterized. Site-selective deprotonation of the 2-hydroxypyridine functionality to give 1' was achieved using both mild (DBU) and strong bases (KOtBu and KHMDS), with no sign of involvement of the phosphinomethyl side arm that was previously established as the reactive fragment. Complex 1' is catalytically active in the dehydrogenation of formic acid to generate CO-free hydrogen in three consecutive runs as well as for the dehydrogenative coupling of alcohols, giving high conversions to different esters and outperforming structurally related PNN ligands lacking the NOH fragment. DFT calculations suggest more favorable release of H2 through reversible reactivity of the hydroxypyridine functionality relative to the phosphinomethyl side arm.

PdAu bimetallic nanoparticles anchored on amine-modified mesoporous ZrSBA-15 for dehydrogenation of formic acid under ambient conditions

Highly active catalysts for the dehydrogenation of formic acid were screened by using different amine-modified ZrSBA-15 as supports.

Highly Active Carbon Supported Pd-Ag Nanofacets Catalysts for Hydrogen Production from HCOOH

Hydrogen is regarded as a future sustainable and clean energy carrier. Formic acid is a safe and sustainable hydrogen storage medium with many advantages, including high hydrogen content, nontoxicity, and low cost. In this work, a series of highly active catalysts for hydrogen production from formic acid are successfully synthesized by controllably depositing Pd onto Ag nanoplates with different Ag nanofacets, such as Ag{111}, Ag{100}, and the nanofacet on hexagonal close packing Ag crystal (Ag{hcp}). Then, the Pd-Ag nanoplate catalysts are supported on Vulcan XC-72 carbon black to prevent the aggregation of the catalysts. The research reveals that the high activity is attributed to the formation of Pd-Ag alloy nanofacets, such as Pd-Ag{111}, Pd-Ag{100}, and Pd-Ag{hcp}. The activity order of these Pd-decorated Ag nanofacets is Pd-Ag{hcp} > Pd-Ag{111} > Pd-Ag{100}. Particularly, the activity of Pd-Ag{hcp} is up to an extremely high value, i.e., TOF{hcp} = 19 000 ± 1630 h(-1) at 90 °C (lower limit value), which is more than 800 times higher than our previous quasi-spherical Pd-Ag alloy nanocatalyst. The initial activity of Pd-Ag{hcp} even reaches (3.13 ± 0.19) × 10(6) h(-1) at 90 °C. This research not only presents highly active catalysts for hydrogen generation but also shows that the facet on the hcp Ag crystal can act as a potentially highly active catalyst.

Formic acid as a hydrogen storage material – development of homogeneous catalysts for selective hydrogen release

Liquid energy: formic acid is an ideal candidate for catalytic release and storage of hydrogen.

An active, stable and recyclable Ru(ii) tetraphosphine-based catalytic system for hydrogen production by selective formic acid dehydrogenation

Efficient catalytic formic acid dehydrogenation was achieved with Ru(ii) complexes ofmeso-tetraphos-1 under batch and continuous feed conditions.