Passive air sampling of PCBs, PBDEs, and organochlorine pesticides across Europe

AQUA-GAPS/MONET-Derived Concentrations and Trends of PAHs and Polycyclic Musks across Global Waters

Polycyclic aromatic hydrocarbons (PAHs), released from petrogenic, pyrogenic or diagenetic sources (degradation of wood materials), are of global concern due to their adverse effects, and potential for long-range transport. While dissolved PAHs have been frequently reported in the literature, there has been no consistent approach of sampling across water bodies. Passive samplers from the AQUA/GAPS-MONET initiative were deployed at 46 sites (28 marine and 18 freshwater), and analyzed for 28 PAHs and six polycyclic musks (PCMs) centrally. Freely dissolved PAH concentrations were dominated by phenanthrene (mean concentration 1500 pg L-1; median 530 pg L-1) and other low molecular weight compounds. Greatest concentrations of phenanthrene, fluoranthene, and pyrene were typically from the same sites, mostly in Europe and North America. Of the PCMs, only galaxolide (72% of samples) and tonalide (61%) were regularly detected, and were significantly cross-correlated. Benchmarking of PAHs relative to penta- and hexachlorobenzene confirmed that the most remote sites (Arctic, Antarctic, and mountain lakes) displayed below average PAH concentrations. Concentrations of 11 of 28 PAHs, galaxolide and tonalide were positively correlated (P < 0.05) with population density within a radius of 5 km of the sampling site. Characteristic PAH ratios gave conflicting results, likely reflecting multiple PAH sources and postemission changes.

Sources of persistent organic pollutants and their physiological effects on opportunistic urban gulls

Urbanization is associated with drastic shifts in biodiversity. While some species thrive in urban areas, the impact of inhabiting these human-altered environments on organism physiology remains understudied. We investigated how exposure to polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) affects the physiology of yellow-legged gulls (Larus michahellis) inhabiting a densely populated, industrialized city. We analyzed blood samples from 50 gulls (20 immatures and 30 adults) and assessed 27 physiological parameters and biomarkers related to xenobiotic protection, health, and feeding habits in these same individuals. We also tracked the movements of 25 gulls (15 immatures and 10 adults) to identify potential sources of persistent organic pollutants (POPs). Both adult and immature gulls primarily inhabited urban areas, followed by marine habitats. Immature gulls spent more time in freshwater, landfills, and agricultural areas. Bioaccumulated ΣPCB (median = 92.7 ng g-1 ww, 1.86-592) and ΣPBDE (median = 1.44 ng g-1 ww, 0.022-9.58) showed no significant differences between age and sex groups. Notably, immature males exhibited the highest correlations with POP concentrations, particularly with the activity of carboxylesterases (CEs), suggesting a higher sensitivity than adults. These findings highlight the potential of plasmatic CEs in immature yellow-legged gulls as effective tracers of POPs exposure and effects, offering insights into the anthropogenic impacts on urban biodiversity.

Characterization of persistent organic contaminants in the atmosphere of Gadani's ship breaking yards and its surrounding: Implications for sustainable ship recycling practices

Gadani is internationally renowned for its extensive ship-breaking operations, positioning it as one of the globe's primary ship-breaking hubs. A comprehensive study was conducted to evaluate the presence of organic contaminants in the air within Gadani, encompassing the areas surrounding ship-breaking facilities, proximate residential settlements, and adjacent roadways. Passive air samplers were employed to collect a total of 30 air samples. The analytical results unveiled a notably elevated concentration of specific organic compounds, with a pronounced prevalence of polycyclic aromatic hydrocarbons (PAHs), short-chain chlorinated paraffins (SCCPs), and polychlorinated biphenyls (PCBs) at the ship-breaking yard. Notably, dichlorodiphenyltrichloroethanes (DDTs) and DDE were detected at substantially lower levels. In particular, sites in close proximity to ship-breaking activities exhibited elevated concentrations of PCBs (Σ7PCB 0.065429 to 7.345714 ng/sample), PAHs (Σ8PAH 2.44 to 134.23 ng/sample), and SCCPs (0.18 to 25.6 ng/sample). Conversely, DDTs and DDE demonstrated higher concentrations near residential settlements. The evaluation of Molecular Diagnostic Ratios for PAHs revealed anthracene/anthracene + phenanthrene ratios of 0.88, 0.69, and 0.5 for ship-breaking areas, roadside locations, and community surroundings, respectively. Furthermore, the benz[a]anthracene/benz-[a]anthracene + chrysene molecular ratios were measured at 0.77 (ship-breaking sites), 0.82 (roadside), and 0.83 (community), respectively. The molecular ratio of fluoranthene/fluoranthene + pyrene at ship-breaking sites was 0.23, while roadside and community ratios were 0.36 and 0.89, respectively. These findings underscore the significant contribution of ship-recycling activities to the atmospheric release of SCCPs, PCBs, and PAHs, emphasizing the global imperative for responsible ship recycling practices.

Air monitoring of organochlorine pesticides (OCPs) in Bursa Türkiye: Levels, temporal trends and risk assessment

Monitoring concentration levels of persistent organic pollutants (POPs) is required to evaluate the effectiveness of international regulations to minimize the emissions of persistent organic pollutants (POPs) into the environment. In this manner, we evaluated the spatial and temporal variations of 22 organochlorine pesticides (OCPs) using polyurethane foam passive air samplers at ten stations in Bursa in 2017 and 2018. The highest concentration value for Σ22OCPs was detected in Ağaköy (775 pg/m3) and Demirtaş (678 pg/m3) sampling sites, while the lowest value was observed in Uludağ University Campus (UUC, 284 pg/m3) site. HCB, γ-HCH, Endo I, and Mirex were the most frequently detected OCPs, which shows their persistence. Diagnostic ratios of β-/(α + γ)-HCH have pointed to historical and possible illegal OCP usage in the study area. The seasonality of air concentrations (with spring and summer concentrations higher than winter and autumn concentrations) was well exhibited by α-HCH, β-HCH, ɣ-HCH, HCB, Endo I, and Mirex but not aldrin, dieldrin, and α-chlordane (CC). Levels of OCPs detected in ambient air in the current study were relatively similar to or lower than those reported in previous studies conducted in Türkiye. Back trajectory analysis was applied to identify the possible sources of OCPs detected in the sampling regions. The Clausius-Clapeyron approach was used to investigate the temperature dependence of OCP gas-phase atmospheric concentrations. The data showed that long-range atmospheric transport affects ambient air OCP concentrations in the study area.

Trace Metals in Global Air: First Results from the GAPS and GAPS Megacities Networks

Trace metals, as constituents of ambient air, can have impacts on human and environmental health. The Global Atmospheric Passive Sampling (GAPS) and GAPS Megacities (GAPS-MC) networks investigated trace metals in the air at 51 global locations by deploying polyurethane foam disk passive air samplers (PUF-PAS) for periods of 3-12 months. Aluminum and iron exhibited the highest concentrations in air (x̅ = 3400 and 4630 ng/m3, respectively), with notably elevated values at a rural site in Argentina thought to be impacted by resuspended soil. Urban sites had the highest levels of toxic Pb and Cd, with enrichment factors suggesting primarily anthropogenic influences. High levels of As at rural sites were also observed. Elevated trace metal concentrations in cities are associated with local emissions and higher PM2.5 and PM10 concentrations. Brake and tire wear-associated metals Sb, Cu, and Zn are significantly correlated and elevated at urban locations relative to those at background sites. These data demonstrate the versatility of PUF-PAS for measuring trace metals and other particle-associated pollutants in ambient air in a cost-effective and simple manner. The data presented here will serve as a global baseline for assessing future changes in ambient air associated with industrialization, urbanization, and population growth.

Congener-Specific Emissions from Floors and Walls Characterize Indoor Airborne Polychlorinated Biphenyls

To reconcile the federal regulation of material polychlorinated biphenyl (PCB) concentrations with recently implemented state regulations of airborne PCBs, there is a need to characterize the relationship between PCB emissions from surfaces and air concentrations. We hypothesized that the magnitude and congener distribution of emissions from floors and walls fully account for the airborne PCBs measured in rooms constructed during the height of PCB production and sales. We measured emissions of PCB congeners from various wall and floor materials using polyurethane foam passive emission samplers before and after hexane wiping. Our results revealed that PCB emissions from flooring adequately predicted the magnitude and congener distribution of PCBs observed in the room air. Emissions varied by material within a single building (5 × 103 ng m-2 day-1 from wood panel walls to 3 × 104 ng m-2 day-1 from vinyl tile) and within the same room. Yet congener distributions between material emission PCB profiles and room air PCB profiles were statistically similar. Hexane wiping significantly reduced PCB emissions (>60%), indicating the importance of surface films as an ongoing source of airborne PCBs. The magnitude and congener distribution of material bulk concentrations did not explain that of material emissions or air concentrations. Passive measurements of polychlorinated biphenyl emissions from floors in a university building predict the concentrations of PCBs in room air.

The effect of military conflict zone in the Middle East on atmospheric persistent organic pollutant contamination in its north

This study aimed to investigate long-range atmospheric transport of selected POPs released due to the effects of military conflicts in regions to the south of Turkey's borders. Ten locations were selected to deploy passive air samplers at varying distances to the border on a southeast-west transect of the country, proximity-grouped as close, middle, and far. Sampling campaign included winter and transition months when desert dust transport events occur. Hypothesis of the study was that a decreasing trend would be observed with increasing distance to the border. Group comparisons based on statistical testing showed that PBDE-183, Σ₄₅PCB, and dieldrin in winter; PBDE-28, PBDE-99, PBDE-154, p,p'-DDE, Σ₁₄PBDE, and Σ₂₅OCP in the transition period; and PBDE-28, PBDE-85, PBDE-99, PBDE-154, PBDE-190, PCB-52, Σ₄₅PCB, p,p'-DDE, and Σ₂₅OCP over the whole campaign had a decreasing trend on the transect. An analysis of concentration ratio to the background showed that long-range atmospheric transport impacted the study sites, especially those of close group in comparison to the local sources. Back-trajectory analyses indicated that there was transport from the conflict areas to sites in the close-proximity group, while farther sampling locations mostly received air masses from Europe, Russia, and former Soviet Union countries, followed by North Africa, rather than the military conflict areas. In consequence, decrease in concentrations with distance and its relation to molecular weight through proportions, diagnostic ratios, analysis of concentration ratio to the background, and back-trajectory analyses support the effect of transport from the military-conflict area to its north.

Gaseous polycyclic aromatic hydrocarbons over the South China Sea: Implications for atmospheric transport under monsoon influences

The seasonal monsoon variations have significant impact on the atmospheric transport of semi-volatile organic pollutants over the South China Sea (SCS). We analyzed polycyclic aromatic hydrocarbons (PAHs) over the basin and island areas (Yongxing Island and Yongshu Island) in 2017. Gaseous PAHs (0.17-1.4 ng m^-3) showed spatio-temporal distinctions in their composition and sources among the basin and island areas. Mixed combustion sources of PAHs were identified over the SCS, including a petroleum source near the island areas. The transport routes of PAHs were inferred by the air mass back trajectories and potential source contribution factor analysis, identifying strong biomass burning signals from the Indochina Peninsula and other Southeast Asian countries. Emissions from approximately 90 % of the combustion sources were transported to basin areas by monsoons, whereas the island areas were dominated by local emissions. This study emphasizes the main potential terrestrial source of PAHs over the SCS under monsoon influences.

Unexpected air pollutants with potential human health hazards: Nitrification inhibitors, biocides, and persistent organic substances

To better understand the influence of land use and meteorological parameters on air pollutants, we deployed passive air samplers in 15 regions with different land use in eastern Austria. The samplers consisted of polyurethane PUF and polyester PEF filter matrices, which were analyzed for 566 substances by gas-chromatography/mass-spectrometry. In a previous article, we highlighted a widespread contamination of ambient air with pesticides that depends on the surrounding land use and meteorological parameters. Here we report that, in addition to agricultural pesticides, eight other substances were frequently detected in ambient air: Nitrapyrin, a nitrification inhibitor used to increase nitrogen use efficiency of fertilizers and banned in Austria since 1993; biocides against insects (DEET and transfluthrin) used mainly outside agriculture; piperonyl butoxide (PBO), a synergist mixed into pesticide formulations; and four industrially used polychlorinated biphenyls (PCBs), long banned worldwide. Concentrations of the detected substances were positively related to air temperature, but only slightly related to agricultural land use in the sampler's vicinity. The city center showed the highest concentrations of biocides, PCBs and PBO, but also medium concentrations of nitrapyrin. Four sites had no air contamination with these substances; including two national parks dominated by grassland or forest, but also two sites with mixed land use. The potential human toxicity of the detected substances based on globally harmonized hazard classifications was high: seven substances had specific organ toxicity, six were cancerogenic, and two were acutely toxic; however, several substances had incomplete information of hazard profiles. Moreover, all substances were acutely and chronically toxic to aquatic life. We recommend that substances of different origins be included in the air pollution monitoring portfolio to comprehensively assess the potential hazards to humans and the environment.

Air monitoring of tire-derived chemicals in global megacities using passive samplers

Pollution from vehicle tires has received world-wide research attention due to its ubiquity and toxicity. In this study, we measured various tire-derived contaminants semi-quantitatively in archived extracts of passive air samplers deployed in 18 major cities that comprise the Global Atmospheric Passive Sampling (GAPS) Network (GAPS-Megacities). Analysis was done on archived samples, which represent one-time weighted passive air samples from each of the 18 monitoring sites. The target analytes included cyclic amines, benzotriazoles, benzothiazoles, and p-phenylenediamine (PPD) derivatives. Of the analyzed tire-derived contaminants, diphenylguanidine was the most frequently detected analyte across the globe, with estimated concentrations ranging from 45.0 pg/m3 in Beijing, China to 199 pg/m3 in Kolkata, India. The estimated concentrations of 6PPD-quinone and total benzothiazoles (including benzothiazole, 2-methylthio-benzothiazole, 2-methyl-benzothiazole, 2-hydroxy-benzothiazole) peaked in the Latin American and the Caribbean region at 1 pg/m3 and 100 pg/m3, respectively. In addition, other known tire-derived compounds, such as hexa(methoxymethyl)melamine, phenylguanidine, and various transformation products of 6PPD, were also monitored and characterized semi-quantitatively or qualitatively. This study presents some of the earliest data on airborne concentrations of chemicals associated with tire-wear and shows that passive sampling is a viable techniquefor monitoring airborne tire-wear contamination. Due to the presence of many tire-derived contaminants in urban air across the globe as highlighted by this study, there is a need to determine the associated exposure and toxicity of these chemicals to humans.

Research progress of the POP fugacity model: a bibliometrics-based analysis

With the emergence of environmental issues regarding persistent organic pollutants (POPs), fugacity models have been widely used in the concentration prediction and exposure assessment of POPs. Based on 778 relevant research articles published between 1979 and 2020 in the Web of Science Core Collection (WOSCC), the current research progress of the fugacity model on predicting the fate and transportation of POPs in the environment was analyzed by CiteSpace software. The results showed that the research subject has low interdisciplinarity, mainly involving environmental science and environmental engineering. The USA was the most paper-published country, followed by Canada and China. The publications of the Chinese Academy of Sciences, Lancaster University, and Environment Canada were leading. Collaboration between institutions was inactive and low intensity. Keyword co-occurrence analysis showed that polychlorinated biphenyls, organochlorine pesticides, and polycyclic aromatic hydrocarbons were the most concerning compounds, while air, water, soil, and sediment were the most concerning environmental media. Through co-citation cluster analysis, in addition to the in-depth exploration of traditional POPs, research on emerging POPs such as cyclic volatile methyl siloxane and dechlorane plus were new research frontiers. The distribution and transfer of POPs in the soil-air environment have attracted the most attention, and the regional grid model based on fugacity has been gradually improved and developed. The co-citation high-burst detection showed that the research hotspots gradually shifted from pollutant persistence and long-range transport potential to pollutant distribution rules among the different environmental media and the long-distance transmission simulation.

Presence of pesticides in the environment, transition into organic food, and implications for quality assurance along the European organic food chain - A review

The use of synthetic pesticides is not allowed in organic production, but traces of synthetic pesticides are regularly detected in organic food. To safeguard the integrity of organic production, organic certifiers are obliged to investigate the causes for pesticide residues on organic food, entailing high costs to the organic sector. Such residues can have various origins, including both fraud and unintentional contamination from the environment. Because the knowledge about contamination from environmental sources is scattered, this review provides an overview of pathways for unintentional and technically unavoidable contamination of organic food with synthetic pesticides in Europe. It shows that synthetic pesticides are widely present in all environmental compartments. They originate from applications in the region, in distant areas or from historical use. Transition into the food chain has been demonstrated by various studies. However, large uncertainties remain regarding the true pesticide contamination of the environment, their dynamics and the contamination risks for the food chain. Organic operators can take certain measures to reduce the risks of pesticide contamination of their products, but a certain extent of pesticide contamination is technically unavoidable. The present paper indicates that (i) a potential risk for pesticide residues exists on all organic crops and thus organic operators cannot meet a 'zero-tolerance' approach regarding pesticide residues at the moment. (ii) Applying a residue concentration threshold to distinguish between cases of fraud and unavoidable contamination for all pesticides is not adequate given the variability of contamination. More reliable answers can be obtained with a case-by-case investigation, where evidence for all possible origins of pesticide residues is collected and the likelihood of unavoidable contamination and fraud are estimated. Ultimately, for organic certification bodies and control authorities it will remain a challenge to determine whether a pesticide residue is due to neglect of production rules or technically unavoidable.

Legacy and novel brominated flame retardants in air of Ny-Ålesund, Arctic from 2011 to 2019

Concentrations of polybrominated diphenyl ethers (PBDEs) and novel brominated flame retardants (NBFRs) in the atmosphere of Ny-Ålesund, Svalbard, were investigated. Passive air samples were collected for eight consecutive one-year periods from August 2011 to August 2019 at seven Arctic sampling sites. High-resolution gas chromatography coupled with high-resolution mass spectrometry (HRGC-HRMS) and gas chromatography coupled with election capture negative ionization mass spectrometry (GC-NCI-MS) were employed for PBDE and NBFR analysis, respectively. The median concentrations of Ʃ₁₁PBDEs and Ʃ₆NBFRs were 0.6 pg/m³ and 4.0 pg/m³, respectively. Hexabromobenzene and BDE-47 were the most abundant NBFR and PBDE congeners in the atmosphere, accounting for 31% and 24% of ƩNBFR and ƩPBDE concentrations, respectively. ƩNBFR concentration was approximately six times higher than that of ƩPBDEs in the same samples. Among NBFRs, the concentrations of 1,2,3,4,5-pentabromobenzene, 2,3,4,5,6-pentabromobenzene, and 2,3-dibromopropyl-2,4,6-tribromophenyl ether showed increasing temporal variations, with estimated doubling times of 3.0, 3.3, and 2.8 years, respectively. The concentrations of almost all PBDE congeners showed a decreasing variation, with halving times ranging from 2.1 to 9.5 years.

Using homing pigeons to monitor atmospheric organic pollutants in a city heavily involving in coal mining industry

Coal is the most extensively used fossil fuel in China. It is well documented that coal combustion detrimentally affected air quality, yet the contribution of coal mining activity to air pollution is still largely unknown. Homing pigeons have been applied to assess the occurrence of atmospheric pollutants within cities. Herein, we sampled homing pigeons from both urban and mining areas in a typical coal industry city (Datong, China) as biomonitors for assessing local air pollution. Target organic contaminants, including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), and organochlorine pesticides (OCPs) were frequently detected in lung, liver, and fat tissues of the pigeons. The pollutants were predominately accumulated in lung, validating that respiration was the main accumulation route for these compounds in homing pigeons. In addition, pathological damage examination in lung and liver tissues revealed that the exposure to atmospheric pollutants impaired pigeon health. While the concentrations of PCBs and OCPs were similar in pigeons from urban and mining areas, the concentrations of PAHs were higher in pigeons from urban area. In contrast, more elevated levels of PBDEs (particularly BDE-209) were found in the mining area, which was consistent with the greater pathological damages and particulate matter levels. Unlike coal combustion, coal mining activities did not increase atmospheric PAH exposure to homing pigeons, but intensified PBDE contamination along with increasing emission of particulate matters. Overall, homing pigeons are promising biomonitors for assessing the respiratory exposure and risk of atmospheric pollutants within cities.

Determination of the gas/particle phase concentrations of PCBs in urban and rural atmosphere in Erzurum, Turkey

Active sampling was conducted for the first time in Erzurum, Turkey, between August 2012 and January 2013, in order to investigate the presence of 82 polychlorinated biphenyls (PCBs) congeners. Urban and rural ambient air samples, including gas and particle phase atmospheric concentrations (GAPPACs) of PCBs, were collected simultaneously using high volume air sampler (HVAS) at two different sampling points of Erzurum. GAPPACs of PCB samples taken using HVAS in Palandöken Mountain Region (2565 m) and Ataturk University Campus (1870 m) were analyzed in GC-MS following appropriate extraction steps. Throughout the sampling period, total ambient air concentrations (gas phase + particulate phase) were 10 ± 6 and 27 ± 13 pg/m³ (mean) for Palandöken Mountain Region (PMR) and Atatürk University Campus (AUC), respectively. Low molecular weighted PCBs were found to be dominant in both rural an urban sampling sites. Meteorological parameters especially temperature (from Clausius-Clapeyron equation), wind direction, wind velocity, and precipitation were found to be effective on PCB concentration and distribution. The gas-particle distributions of PCBs in the summer and winter period were found to be 82% (gas phase) and 18% (particle phase) in the PMR and 90% (gas phase) and 10% (particle phase) in AUC, through Junge-Pankow adsorption model. In the light of these findings, total PCB concentrations detected in urban atmosphere (due to possible PCB sources) were observed to be higher than those determined in rural area.

Organophosphate esters in Arctic air from 2011 to 2019: Concentrations, temporal trends, and potential sources

Concentrations of seven organophosphate ethers (OPEs) were quantified in passive air samples deployed for eight consecutive one-year periods from August 2011 to August 2019 at seven sampling sites in the area of Ny-Ålesund, Svalbard, Arctic. Non-chlorinated and chlorinated OPEs were approximately equally abundant and the mean atmospheric concentration for the sum of OPEs was around 300 pg/m³. Levels of OPEs were two orders of magnitude higher than those of polybrominated diphenyl ethers in the sampling regions, likely a result of efficient long-range transport and higher environmental release rates. For the two most abundant compounds, tris(2-chloroethyl) phosphate and tris-n-butyl phosphate, increasing temporal trends in atmospheric concentrations were observed, with estimated doubling times of 2.9 and 4.2 years, respectively. Slightly elevated OPE levels at two sampling sites in the vicinity of a research station and the local airport suggest the possible influence of local contamination sources. Re-volatilization from glaciers may also influence levels of OPE in the Arctic atmosphere.

Passive Sampling as a Tool to Assess Atmospheric Pesticide Contamination Related to Vineyard Land Use

The massive use of pesticides in agriculture has led to widespread contamination of the environment, particularly the atmospheric compartment. Thirty-six pesticides, most used in viticulture, were monitored in ambient air using polyurethane foams as passive air samplers (PUF-PAS). Spatiotemporal data were collected from the samplers for 10 months (February–December 2013), using two different sampling times (1 and 2 months) at two different sites in a chateau vineyard in Gironde (France). A high-volume active air sampler was also deployed in June. Samples were extracted with dichloromethane using accelerated solvent extraction (ASE) (PUFs from both passive and active) or microwave-assisted extraction (MAE) (filters from active sampling). Extracts were analyzed by both gas and liquid chromatography coupled with tandem mass spectrometry. A total of 23 airborne pesticides were detected at least once. Concentrations in PUF exposed one month ranged from below the limits of quantification (LOQs) to 23,481 ng PUF−1. The highest concentrations were for folpet, boscalid, chlorpyrifos-methyl, and metalaxyl-m—23,481, 17,615, 3931, and 3324 ng PUF−1. Clear seasonal trends were observed for most of the pesticides detected, the highest levels (in the ng m−3 range or the µg PUF−1 range) being measured during their application period. Impregnation levels at both sites were heterogeneous, but the same pesticides were involved. Sampling rates (Rs) were also estimated using a high-volume active air sampler and varied significantly from one pesticide to another. These results provide preliminary information on the seasonality of pesticide concentrations in vineyard areas and evidence for the effectiveness of PUF-PAS to monitor pesticides in ambient air.

Identifying emerging environmental concerns from long-chain chlorinated paraffins towards German ecosystems

Germany is one of several major European producers of chlorinated paraffins (CPs). This study showed that not only the legacy short-chain products (SCCPs, C_10-13), but also the current-use medium- and long-chain products (MCCPs, C_14-17; LCCPs, C_>17) as well as the very-short-chain impurities (vSCCPs, C_<10) are ubiquitous in the 72 samples collected from the coastal, terrestrial, and freshwater ecosystems across the country. The concentrations of LCCPs surpassed those of the other CPs in 40% of the biota samples. Archived bream samples collected downstream of a CP-manufacturing factory showed decreasing temporal trends of (v)SCCPs and relatively constant levels of MCCPs from 1995 to 2019; however, the overall levels of LCCPs have increased by 290%, reflecting the impact of chemical regulation policies on changes in CP production. A visualization algorithm was developed for integrating CP results from various matrices to illustrate spatial tendencies of CP pollution. Higher levels of (v)SCCPs were indicated in the former West Germany region, while MCCP and LCCP concentrations did not seem to differ between former East and West Germany, suggesting relatively equal production and use of these chemicals after the German Reunification. The results provide an early warning signal of environmental concerns from LCCPs on the eve of their booming global production and use.

Formal waste treatment facilities as a source of halogenated flame retardants and organophosphate esters to the environment: A critical review with particular focus on outdoor air and soil

Extensive use of halogenated flame retardants (HFRs) and organophosphate esters (OPEs) has generated great concern about their adverse effects on environmental and ecological safety and human health. As well as emissions during use of products containing such chemicals, there are mounting concerns over emissions when such products reach the waste stream. Here, we review the available data on contamination with HFRs and OPEs arising from formal waste treatment facilities (including but not limited to e-waste recycling, landfill, and incinerators). Evidence of the transfer of HFRs and OPEs from products to the environment shows that it occurs via mechanisms such as: volatilisation, abrasion, and leaching. Higher contaminant vapour pressure, increased temperature, and elevated concentrations of HFRs and OPEs in products contribute greatly to their emissions to air, with highest emission rates usually observed in the early stages of test chamber experiments. Abrasion of particles and fibres from products is ubiquitous and likely to contribute to elevated FR concentrations in soil. Leaching to aqueous media of brominated FRs (BFRs) is likely to be a second-order process, with elevated dissolved humic matter and temperature of leaching fluids likely to facilitate such emissions. However, leaching characteristics of OPEs are less well-understood and require further investigation. Data on the occurrence of HFRs and OPEs in outdoor air and soil in the vicinity of formal e-waste treatment facilities suggests such facilities exert a considerable impact. Waste dumpsites and landfills constitute a potential source of HFRs and OPEs to soil, and improper management of waste disposal might also contribute to HFR contamination in ambient air. Current evidence suggests minimal impact of waste incineration plants on BFR contamination in outdoor air and soil, but further investigation is required to confirm this.

Spatial and seasonal variations of PAHs in soil, air, and atmospheric bulk deposition along the plain to mountain transect in Hubei province, central China: Air-soil exchange and long-range atmospheric transport

Polycyclic aromatic hydrocarbons (PAHs) are a long-term environmental problem faced by human society. The sources of involuntary PAHs are complex, moreover, secondary emissions of fixed PAHs in the environment occur due to global change and disturbance of human activities. Samples of three environmental media including soil, air, and atmospheric bulk deposition were collected to observe the spatial distribution and seasonal variation, to discuss the source or sink of PAHs and their association with the air mass transport along the plain (Jianghan Plain, JHP) to mountain transect, and explore the geographic scope of the atmospheric transport influence. The results obtained showed that 16 individual PAHs generally existed in all environmental multimedia being studied, and the PAHs concentration in air, soil and deposition flux of atmospheric bulk was higher in JPH than in "Western Hubei Mountains" (WHMs). Considerably high PAHs concentrations were obtained from the soil, air and atmospheric bulk deposition in winter, summer, and both summer and winter, respectively. The air-soil fugacity fraction of PAHs indicated that the soil of Dajiuhu (DJH) is likely to be a sink. Backward air trajectory simulation confirmed that most of the air mass passes over the JHP before reaching DJH, combined with the (transport and persistence level III) TaPL3 model results JHP are acting as sources. However, seasonal changes lead to a shift in the roles of soil sources and sinks. The TaPL3 model calculated that PAHs are transported through water for a wider range of effects and a longer persistence, even up to 10 years.

Soil-air partitioning of semivolatile organic compounds in the Lesser Himalaya region: Influence of soil organic matter, atmospheric transport processes and secondary emissions

After decades of imposed regulations about reducing the primary emissions of persistent organic pollutants (POPs), these pollutants are still present in the environment. Soils are important repositories of such persistent semivolatile organic contaminants (SVOCs), and it is assumed that SVOCs sequestered in these reservoirs are being re-mobilized due to anthropogenic influence. In this study, concentrations of organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs) in soil and air, their fugacities, fluxes and the soil-air partition coefficient (K_SA) were determined for three different land cover types (glacial, remote/mountainous and urban) of the Lesser Himalayan Region (LHR). The concentrations of OCPs, PCBs and PBDEs in soils and air ranged between 0.01 and 2.8, 0.81-4.8, 0.089-0.75 ng g^-1; 0.2-106, 0.027-182, and 0.011-7.26 pg m^-3, respectively. The levels of SVOCs in the soil were correlated with soil organic matter (SOM) indicating that SOM is a substrate for the organic pollutants in soils. The Clausius-Clapeyron plots between ln P and inverse of temperature (1000/T) suggested that long range atmospheric transport was the major input source of PBDEs and higher chlorinated PCBs over the LHR. The uneven and wide distribution of local sources in LHR and up-slope enrichment of SVOCs explained the spatial variability and altitudinal patterns. The soils near mountain and urban lakes act as local sinks of SVOCs such as β-HCH, pp΄-DDT, CB-28, -118, -153, BDE-47, -99, and -154, with soil-air exchange fluxes tending more toward deposition. However, the soils near glacial lakes acted as local sources of more volatile congeners of α-HCH, γ-HCH, op'-DDT, pp'-DDE and lower to medium chlorinated PCBs such as CB-18, -28, -53, -42 and BDE-47, -99, with soil-air exchange tending more toward volatilization flux.

Effects of Organic Carbon Origin on Hydrophobic Organic Contaminant Fate in the Baltic Sea

The transport and fate of hydrophobic organic contaminants (HOCs) in the marine environment are closely linked to organic carbon (OC) cycling processes. We investigated the influence of marine versus terrestrial OC origin on HOC fluxes at two Baltic Sea coastal sites with different relative contributions of terrestrial and marine OC. Stronger sorption of the more than four-ring polycyclic aromatic hydrocarbons and penta-heptachlorinated polychlorinated biphenyls (PCBs) was observed at the marine OC-dominated site. The site-specific partition coefficients between sediment OC and water were 0.2-1.0 log units higher at the marine OC site, with the freely dissolved concentrations in the sediment pore-water 2-10 times lower, when compared with the terrestrial OC site. The stronger sorption at the site characterized with marine OC was most evident for the most hydrophobic PCBs, leading to reduced fluxes of these compounds from sediment to water. According to these results, future changes in OC cycling because of climate change, leading to increased input of terrestrial OC to the marine system, can have consequences for the availability and mobility of HOCs in aquatic systems and thereby also for the capacity of sediments to store HOCs.

Atmospheric deposition of semivolatile organic pollutants in European high mountains: Sources, settling and chemical degradation

Bulk atmospheric deposition samples, including wet and dry deposition, were collected during 2004-2006 in four high mountain European lakes: Skalnate Pleso (Tatra mountains, Slovakia), Gossenköllesee (Alps, Austria), Redon (Pyrenees, Spain), and Lochnagar (Grampian Mountains, Scotland). Samples were analysed for polycyclic aromatic hydrocarbons (PAHs), polychlorobiphenyls (PCBs), hexachlorobenzene (HCB), hexachlorocyclohexanes (HCHs), endosulfans, and polybromodiphenyl ethers (PBDEs). The deposition of PCBs, HCHs, and low brominated BDEs reflected baseline contributions from long range atmospheric transport. This was also the case for PAHs in Redon and Gossenköllesee, endosulfans in Lochnagar and Gossenköllesee and HCB in these three lakes. However, Skalnate received PAHs, endosulfans, and HCB from regional sources as it was the case for endosulfans in Redon. The distinct origin of these pollutants was reflected in the relative composition of some metabolites such as the proportion of endosulfan sulfate vs α- and β-endosulfans or the relative composition of BDE47 and BDE99. Wet deposition was the main process for atmospheric removal of PAHs, HCHs, and HCB. In addition, warm season revolatilization from soils and melting snow with subsequent condensation at low temperature were significant for volatile PAHs, HCB, low chlorinated PCBs, and endosulfans. Reaction with OH radicals was not a significant loss process of HCHs and HCB in remote areas, dominated by wet deposition, whereas PCBs and PAHs were significantly removed by both wet deposition and OH radical oxidation, the latter dominating in the highest altitude sites. Photolysis was the main atmospheric removal process of PBDEs, dominating over atmospheric deposition and OH depletion in all sites.

Factors affecting multiple persistent organic pollutant concentrations in the air above Japan: A panel data analysis

Numerous reports have elucidated different statistical approaches to identify temporal trends in atmospheric persistent organic pollutant (POP) time series. However, the correlation of industrial activity with concentrations of atmospheric POPs in Japan has not yet been determined. Herein, a panel data analysis of a 16-year monitoring program (2003-2018) conducted by the Japanese Ministry of Environment was used to investigate a range of POPs in the atmosphere above Japan. This work focuses on polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs), polybrominated diphenyl ethers (PBDEs), hexachlorobenzene (HCB), and pentachlorobenzene (PeCBz) collected each year at 53 sites across Japan. The panel analysis revealed that PCB, PCN, and PBDE concentrations were influenced by a combination of factors including year, industrial activity (municipal and industrial waste incinerators, cement kilns, steel industry, and secondary zinc production), population, temperature, and atmospheric boundary layer. However, HCB and PeCBz were not significantly affected by these factors. Industrial activity showed stronger positive correlations with all homologues of PCBs, PCNs, and PBDEs as compared to those demonstrated by population. Significant decreasing trends were identified for the atmospheric ∑PBDEs (half-life t_1/2 = 9.4 years), ∑PCNs (t_1/2 = 8.9 years), and ∑PCBs (t_1/2 = 13.5 years) concentrations, while HCB and PeCBz showed slightly increasing or steady levels. As a statistical tool, panel data analysis can contribute to the assessment of spatial and temporal trends of POPs at a national scale, while elucidating different behavioral responses to numerous environmental variables.

Introducing a nested multimedia fate and transport model for organic contaminants (NEM)

Some organic contaminants, including the persistent organic pollutants (POPs), have achieved global distribution through long range atmospheric transport (LRAT). Regulatory efforts, monitoring programs and modelling studies address the LRAT of POPs on national, continental (e.g. Europe) and/or global scales. Whereas national and continental-scale models require estimates of the input of globally dispersed chemicals from outside of the model domain, existing global-scale models either have relatively coarse spatial resolution or are so computationally demanding that it limits their usefulness. Here we introduce the Nested Exposure Model (NEM), which is a multimedia fate and transport model that is global in scale yet can achieve high spatial resolution of a user-defined target region without huge computational demands. Evaluating NEM by comparing model predictions for PCB-153 in air with measurements at nine long-term monitoring sites of the European Monitoring and Evaluation Programme (EMEP) reveals that nested simulations at a resolution of 1°× 1° yield results within a factor of 1.5 of observations at sites in northern Europe. At this resolution, the model attributes more than 90% of the atmospheric burden within any of the grid cells containing an EMEP site to advective atmospheric transport from elsewhere. Deteriorating model performance with decreasing resolution (15°× 15°, 5°× 5° and 1°× 1°), manifested by overestimation of concentrations across most of northern Europe by more than a factor of 3, illustrates the effect of numerical diffusion. Finally, we apply the model to demonstrate how the choice of spatial resolution affect predictions of atmospheric deposition to the Baltic Sea. While we envisage that NEM may be used for a wide range of applications in the future, further evaluation will be required to delineate the boundaries of applicability towards chemicals with divergent fate properties as well as in environmental media other than air.

Passive Air Sampling of PCDD/Fs, PCBs, PAEs, DEHA, and PAHs from Informal Electronic Waste Recycling and Allied Sectors in Indian Megacities

Xenobiotic chemical emissions from the informal electronic waste recycling (EW) sector are emerging problem for developing countries, with scale and impacts that are yet to be evaluated. We report an intensive polyurethane foam disk passive air sampling study in four megacities in India to investigate atmospheric organic pollutants along five transects viz., EW, information technology (IT), industrial, residential, and dumpsites. Intraurban emission sources were estimated and attributed by trajectory modeling and positive matrix factorization (PMF). ∑₁₇PCDD/Fs, ∑₂₅PCBs, ∑₇plasticizers, and ∑₁₅PAHs concentrations ranged from 3.1 to 26 pg/m³ (14 ± 7; Avg ± SD), 0.5-52 ng/m³ (9 ± 12); 7.5-520 ng/m³, (63 ± 107) and 6-33 ng/m³ (17 ± 6), respectively. EW contributed 45% of total PCB concentrations in this study and was evidenced as a major factor by PMF. The dominance of dioxin-like PCBs (dl-PCBs), particularly PCB-126, reflects combustion as the possible primary emission source. PCDD/Fs, PCBs and plasticizers were consistently highest at EW transect, while PAHs were maximum in industrial transect followed by EW. Concentrations of marker plasticizers (DnBP and DEHP) released during EW activities were significantly higher (p < 0.05) in Bangalore than in other cities. Toxic equivalents (TEQs) due to dl-PCBs was maximum in the EW transect and PCB-126 was the major contributor. For both youth and adult, the highest estimated inhalation risks for dl-PCBs and plasticizers were seen at the EW transect in Bangalore, followed by Chennai and New Delhi.

Persistent Organic Pollutants (POPs) and Related Chemicals in the Global Environment: Some Personal Reflections

Persistent organic pollutants (POPs) and related chemicals are fascinating because of their combination of physical-chemical properties and complex effects. Most are man-made, but some also have natural origins. They are persistent in the environment, but they can be broken down variously by biodegradation, atmospheric reactions, and abiotic transformations. They can exist in the gas or particle phases, or both, in the atmosphere and in the dissolved or particulate phases, or both, in water. These combinations mean that they may undergo long-range transport in the atmosphere or oceans, or they may stay close to sources. Hence, emissions from one country are frequently a source of contamination to another country. They are also usually lipophilic, so-combined with persistence-this means they can accumulate in organisms and biomagnify through food chains. We all have a baseline of POPs residues in our tissues, even the unborn fetus via placental transfer and the newly born baby via mother's milk. POPs in biological systems occur in mixtures, so confirming effects caused by POPs on humans and other top predators is never straightforward. Depending on which papers you read, POPs may be relatively benign, or they could be responsible for key subchronic and chronic effects on reproductive potential, on immune response, as carcinogens, and on a range of behavioral and cognitive end points. They could be a factor behind diseases and conditions which have been increasingly reported and studied in modern societies. In short, they are endlessly fascinating to scientists and a nightmare to regulators and policy makers.

Room-to-Room Variability of Airborne Polychlorinated Biphenyls in Schools and the Application of Air Sampling for Targeted Source Evaluation

Airborne polychlorinated biphenyl (PCB) concentrations are higher indoors than outdoors due to their historical use in building materials and their presence in modern paints and surface treatments. For some populations, including school children, PCB levels indoors result in inhalation exposures that may be greater than or equivalent to exposure through diet. In a school, PCB exposure may come from multiple sources. We hypothesized that there are both Aroclor and non-Aroclor sources within a single school and that PCB concentration and congener profiles differ among rooms within a single building. To evaluate this hypothesis and to identify potential localized sources, we measured airborne PCBs in nine rooms in a school. We found that schoolroom concentrations exceed outdoor air concentrations. Schoolroom concentrations and congener profiles also varied from one room to another. The concentrations were highest in the math room (35.75 ng m-3 ± 8.08) and lowest in the practice gym (1.54 ng m-3 ± 0.35). Rooms in the oldest wing of the building, originally constructed between 1920 and 1970, had the highest concentrations. The congener distribution patterns indicate historic use of Aroclor 1254 as well as modern sources of non-Aroclor congeners associated with paint pigments and surface coatings. Our findings suggest this noninvasive source identification method presents an opportunity for targeted source testing for more cost-effective prioritization of materials remediation in schools.

Evaluation of atmospheric sources of PCDD/Fs, PCBs and PBDEs around an MSWI plant using active and passive air samplers

This study evaluated the spatial distributions and concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) in ambient air around a municipal solid waste incineration (MSWI) plant located in eastern China in two sampling campaigns within one year. Twenty high-volume samples and 27 passive air samples were collected from May 2012 to May 2013. The mean sampling rate of the passive sampler was estimated to be 3.8 ± 1.8 m³ d^-1 in summer and autumn, while the mean sampling rate was 2.8 ± 1.0 m³ d^-1 in winter and spring. Hence, the annual mean sampling rate was approximately 3.2 ± 1.4 m³ d^-1. The mean levels of PCDD/Fs, PCBs, PBDEs (excluding BDE-209) and BDE-209 in the passive air samples varied in the ranges of 0.086 ± 0.058-0.76 ± 0.51 pg TEQ m^-3, 39 ± 26-170 ± 120 pg m^-3, 3.3 ± 2.2-36 ± 24 pg m^-3 and 58 ± 39-300 ± 150 pg m^-3, respectively. The levels, congener profiles and spatial distributions of PCDD/Fs, PCBs and PBDEs were investigated. The results showed that the concentrations of PCDD/Fs and PCBs decreased with increasing distance from the emission source and that different sampling sites had slightly different effects. However, this trend was opposite to that observed for PBDEs. Moreover, principal component analysis (PCA) demonstrated that the MSWI emission source was the primary factor for PCDD/Fs in ambient air. Further monitoring should be conducted to evaluate the noticeable impact on the environment and human health due to exposure.

Main sources controlling atmospheric burdens of persistent organic pollutants on a national scale

National long-term monitoring programs on persistent organic pollutants (POPs) in background air have traditionally relied on active air sampling techniques. Due to limited spatial coverage of active air samplers, questions remain (i) whether active air sampler monitoring sites are representative for atmospheric burdens within the larger geographical area targeted by the monitoring programs, and thus (ii) if the main sources affecting POPs in background air across a nation are understood. The main objective of this study was to explore the utility of spatial and temporal trends in concert with multiple modelling approaches to understand the main sources affecting polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in background air across a nation. For this purpose, a comprehensive campaign was carried out in summer 2016, measuring POPs in background air across Norway using passive air sampling. Results were compared to a similar campaign in 2006 to assess possible changes over one decade. We furthermore used the Global EMEP Multi-media Modeling System (GLEMOS) and the Flexible Particle dispersion model (FLEXPART) to predict and evaluate the relative importance of primary emissions, secondary emissions, long-range atmospheric transport (LRAT) and national emissions in controlling atmospheric burdens of PCB-153 on a national scale. The concentrations in air of both PCBs and most of the targeted OCPs were generally low, with the exception of hexachlorobenzene (HCB). A limited spatial variability for all POPs in this study, together with predictions by both models, suggest that LRAT dominates atmospheric burdens across Norway. Model predictions by the GLEMOS model, as well as measured isomeric ratios, further suggest that LRAT of some POPs are dictated by secondary emissions. Our results illustrate the utility of combining observations and mechanistic modelling approaches to help identify the main factors affecting atmospheric burdens of POPs across a nation, which, in turn, may be used to inform both national monitoring and control strategies.

Ambient air monitoring around the dioxin remediation site in Da Nang, Vietnam, using passive air samplers

The concentrations and temporal variations of polychlorodibenzo-p-dioxins and polychlorodibenzofurans (PCDDs/PCDFs) in ambient air between March 2013 and February 2017 were investigated by passive air samplers containing polyurethane foam (PUF) disks in the dioxin remediation area using in-pile thermal desorption (IPTD) technology at Da Nang airport, Vietnam. The PCDD/PCDF concentrations in ambient air at each site depended on the location of the emission sources and the wind direction, the dioxin contamination level of excavated materials, the periods of excavation and transport, and the operation of the IPTD treatment system. The PCDD/PCDF concentrations were the highest in the former Agent Orange mixing and loading area (AOMLA), which was the closest to the IPTD system, with total toxic equivalent (TEQ) values ranging from 0.437 to 15.3 pg/PUF/day. The total TEQ concentrations in the Sen Lake area ranged from 0.138 to 2.41 pg/PUF/day. The lowest concentration of PCDDs/PCDFs occurred in the northern perimeter area, with total TEQ values ranging from 0.164 to 0.972 pg/PUF/day. The decreasing trend of the PCDD/PCDF concentrations in ambient air was confirmed over time at all three monitoring sites, among which there was a strong decrease in the former AOMLA after February 2015. Residents living near the Da Nang airport were at a low risk of being exposed to PCDDs/PCDFs through inhalation during remediation project implementation, while residents living close to the former AOMLA faced elevated risks with an average daily dose of PCDDs/PCDFs through inhalation ranging from 0.017 to 0.82 pg TEQ/kg body weight/day.

Evaluation of an alternative sorbent for passive sampling of the herbicides 2,4-D and Dicamba in the air

The present study aimed to evaluate the Strata-X^® sorbent, commonly used in cartridges, through analysis by high-performance liquid chromatography coupled with mass spectrometry. Due to the different physical-chemical characteristics of the compounds, different conditions of chromatography and mass analysis were necessary. The developed methods were validated in terms of selectivity, linear range, linearity (coefficient of determination, r²), the limit of detection (LOD), the limit of quantification (LOQ), accuracy (recovery, %), and precision (RSD, %). The results allowed us to select efficient extraction methods, using methanol acidified to pH 2 with formic acid, to elute the herbicides 2,4-D and dicamba in both sorbent materials. Besides, the Strata-X^® sorbent was efficient in the sorption of analytes; thus, we indicate it for potential use in air sampling as an alternative to XAD-2.

Passive sampling and benchmarking to rank HOC levels in the aquatic environment

The identification and prioritisation of water bodies presenting elevated levels of anthropogenic chemicals is a key aspect of environmental monitoring programmes. Albeit this is challenging owing to geographical scales, choice of indicator aquatic species used for chemical monitoring, and inherent need for an understanding of contaminant fate and distribution in the environment. Here, we propose an innovative methodology for identifying and ranking water bodies according to their levels of hydrophobic organic contaminants (HOCs) in water. This is based on a unique passive sampling dataset acquired over a 10-year period with silicone rubber exposures in surface water bodies across Europe. We show with these data that, far from point sources of contamination, levels of hexachlorobenzene (HCB) and pentachlorobenzene (PeCB) in water approach equilibrium with atmospheric concentrations near the air/water surface. This results in a relatively constant ratio of their concentrations in the water phase. This, in turn, allows us to (i) identify sites of contamination with either of the two chemicals when the HCB/PeCB ratio deviates from theory and (ii) define benchmark levels of other HOCs in surface water against those of HCB and/or PeCB. For two polychlorinated biphenyls (congener 28 and 52) used as model chemicals, differences in contamination levels between the more contaminated and pristine sites are wider than differences in HCB and PeCB concentrations endorsing the benchmarking procedure.

Net volatilization of PAHs from the North Pacific to the Arctic Ocean observed by passive sampling

The North Pacific-Arctic Oceans are important compartments for semi-volatile organic compounds' (SVOCs) global marine inventory, but whether they act as a "source" or "sink" remains controversial. To study the air-sea exchange and fate of SVOCs during their poleward long-range transport, low-altitude atmosphere and surface seawater were measured for polycyclic aromatic hydrocarbons (PAHs) by passive sampling from July to September in 2014. Gaseous PAH concentrations (0.67-13 ng m^-3) were dominated by phenanthrene (Phe) and fluorene (Flu), which displayed an inverse correlation with latitude, as well as a significant linear relationship with partial pressure and inverse temperature. Concentrations of PAHs in seawater (1.8-16 ng L^-1) showed regional characteristics, with higher levels near the East Asia and lower values in the Bering Strait. The potential impact from the East Asian monsoon was suggested for gaseous PAHs, which - similar to PAHs in surface seawater - were derived from combustion sources. In addition, the data implied net volatilization of PAHs from seawater into the air along the entire cruise; fluxes displayed a similar pattern to regional and monthly distribution of PAHs in seawater. Our results further emphasized that air-sea exchange is an important process for PAHs in the open marine environments.

Evaluating couch polyurethane foam for a potential passive sampler of semivolatile organic compounds

BACKGROUND/OBJECTIVE

Polyurethane foam (PUF), a proven sampling medium for measuring air concentrations of organic compounds, is widely used in upholstered home furniture. We evaluated the potential utility of couch PUF as a passive sampler and as a reservoir for non-flame retardant semivolatile organic compounds (SVOCs).

METHODS

We collected PUF samples from 13 California home couches, measured concentrations (C_PUF) of 64 SVOCs at three different depths (i.e., top, top-middle, and middle from couch surfaces facing outward), and examined concentration changes with depth. To calculate the PUF-air partition coefficient (K_PUF-air = C_PUF/C_air = C_PUF × K_dust-air/C_dust), we used the calculated dust-air partition coefficient (K_dust-air) with the octanol-air partition coefficient (K_oa) and dust concentrations (C_dust) simultaneously collected and measured. We used K_PUF-air to compute fugacity capacity of PUF and chemical mass distribution among various indoor compartments and PUF.

RESULTS

Among 29 detected compounds, 11 compounds were detected in more than 50% of the samples at all depths. Among the 11 compounds, concentrations of phenanthrene, 2-benzylideneoctanal, galaxolide, tonalide, and homosalate decreased with depth. Among the studied SVOCs, more than 20% of the total mass was distributed to couch PUF for phenol and compounds in skin-applied products (i.e., 2-benzylideoneoctanal, galaxolide, and homosalate).

CONCLUSIONS

Our results showed that couch PUF can absorb many SVOCs and may be an important reservoir for some SVOCs. However, it may not be an effective passive sampling medium for those that have relatively high K_oa values. Direct dermal contact with couch seats may be an important exposure route for non-users of skin-applied compounds.

GC-HRMS with Complementary Ionization Techniques for Target and Non-target Screening for Chemical Exposure: Expanding the Insights of the Air Pollution Markers in Moscow Snow

Environmental exposure assessment is an important step in establishing a list of local priority pollutants and finding the sources of the threats for proposing appropriate protection measures. Exposome targeted and non-targeted analysis as well as suspect screening may be applied to reveal these pollutants. The non-targeted screening is a challenging task and requires the application of the most powerful analytical tools available, assuring wide analytical coverage, sensitivity, identification reliability, and quantitation. Moscow, Russia, is the largest and most rapidly growing European city. That rapid growth is causing changes in the environment which require periodic clarification of the real environmental situation regarding the presence of the classic pollutants and possible new contaminants. Gas chromatography - high resolution time-of-flight mass spectrometry (GC-HR-TOFMS) with electron ionization (EI), positive chemical ionization (PCI), and electron capture negative ionization (ECNI) ion sources were used for the analysis of Moscow snow samples collected in the early spring of 2018 in nine different locations. Collection of snow samples represents an efficient approach for the estimation of long-term air pollution, due to accumulation and preservation of environmental contaminants by snow during winter period. The high separation power of GC, complementary ionization methods, high mass accuracy, and wide mass range of TOFMS allowed for the identification of several hundred organic compounds belonging to the various classes of pollutants, exposure to which could represent a danger to the health of the population. Although quantitative analysis was not a primary aim of the study, targeted analysis revealed that some priority pollutants exceeded the established safe levels. Thus, dibutylphthalate concentration was over 10-fold higher than its safe level (0.001 mg/L), while benz[a]pyrene concentration exceeded Russian maximal permissible concentration value of 5 ng/L in three samples. The large amount of information generated during the combination of targeted and non-targeted analysis and screening samples for suspects makes it feasible to apply the big data analysis to observe the trends and tendencies in the pollution exposome across the city.

Atmospheric Occurrence of Organochlorine Pesticides and Inhalation Cancer Risk in Urban Areas at Southeast Brazil

Organochlorine pesticides (OCPs) have been produced for almost a century and some of them are still used, even after they have been proved to be toxic, persistent, bioaccumulative and prone to long-range transport. Brazil has used and produced pesticides in industrial scales for both agricultural and public health purposes. Urban and industrial regions are of special concern due to their high population density and their increased exposure to chemical pollution, many times enhanced by chemical production, application or irregular dumping. Therefore, we aimed to investigate the occurrence of OCPs in outdoor air of urban sites from two major regions of southeast Brazil. Some of these sites have been affected by OCP production and their irregular dumping. Deterministic and probabilistic inhalation cancer risk (CR) assessments were conducted for the human populations exposed to OCPs in ambient air. Ambient air was mainly affected by Ʃ-HCH (median = 340 pg m^-3) and Ʃ-DDT (median = 233 pg m^-3), the only two OCPs registered for domissanitary purposes in Brazil. OCP concentrations tended to be higher in summer than in winter. Dumping sites resulted in the highest OCP atmospheric concentrations and, thus, in the highest CR estimations. Despite of all limitations, probabilistic simulations suggested that people living in the studied regions are exposed to an increased risk of hepatic cancer. Infants and toddlers (0 < 2 y) were exposed to the highest inhalation CRs compared to other age groups. Other exposure pathways (such as ingestion and dermic uptake) are needed for a more comprehensive risk assessment. Moreover, this study also highlights the need to review the human exposure to OCPs through inhalation and their respective CR in other impacted areas worldwide, especially where high levels of OCPs are still being measured.

[Research progress on analytical methods for the determination of hexachlorobutadiene]

Hexachlorobutadiene (HCBD) is one of persistent organic pollutants (POPs) listed in Annex A and Annex C of the Stockholm Convention in 2015 and 2017, respectively. Research on the sources, environmental occurrences, and biological effects of HCBD has a great significance in controlling this newly added POPs. Sensitive and credible methods for the determination of HCBD are preconditions and form the basis for related research work. In recent years, many researchers have included HCBD as one of the analytes in monitoring or methodological studies. Based on the results of these studies, this paper reviews the research progress on analytical methods for the determination of HCBD and focuses on sample pretreatment methods for the analysis of HCBD in various matrices such as air, water, soil, sewage sludge, and biological tissues. The advantages and disadvantages of the methods are also compared to provide reference for further research in this field.For air samples, HCBD was usually collected by passing air through sorbent cartridges. Materials such as Tenax-TA, Carbosieve, Carbopack, Carboxen 1000, or their mixtures were used as the sorbent. HCBD was thermally desorbed and re-concentrated in a trap and finally transferred for instrumental analysis. Limits of detection (LODs) for HCBD in these methods were at the ng/m3 scale. Compared to sampling using pumps, passive air samplers (PAS) such as polyurethane foam PAS (PUF-PAS) do not require external power supply and are more convenient for sampling POPs in air at a large scale. The LOD of the sorbent-impregnated PUF PAS (SIP-PAS) method was much lower (0.03 pg/m3) than that of the PUF-PAS method (20 pg/m3). However, the sampling volumes in the SIP-PAS and PUF-PAS methods (-6 m3) calculated from the log KOA value of HCBD have significant uncertainty, and this must be confirmed in the future.For water samples, HCl or copper sulfate was added to the sample immediately after sampling to prevent any biological activities. HCBD can be extracted from water using methods such as the purge and trap method, liquid-liquid extraction (LLE) method, and solid phase extraction (SPE) method. Among these methods, SPE enabled the simultaneous extraction, purification, and concentration of trace HCBD in a single step. Recoveries of HCBD on Strata-X and Envi-Carb SPE cartridges (63%-64%) were higher than those on Envi-disk, Oasis HLB, and Strata-C18 cartridges (31%-46%). Drying is another key step for obtaining high recoveries of HCBD. Disk SPE involving the combination of a high-vacuum pump and a low-humidity atmosphere is an effective way to eliminate the residual water. In addition, a micro SPE method using functionalized polysulfone membranes as sorbents and employing ultrasonic desorption was developed for extracting HCBD from drinking water. The recovery of HCBD reached 102%, with a relative standard deviation (RSD) of 3.5%.For solid samples such as dust, soil, sediment, sewage sludge, fly ash, and biota tissue, multiple pretreatment methods were used in combination, owing to the more complex matrix. Freeze or air drying, grinding, and sieving of samples were commonly carried out before the extraction. Soxhlet extraction is a typical extraction method for HCBD; however, it requires many organic reagents and is time consuming. The accelerated solvent extraction (ASE) method requires a small amount of organic reagent, and the extraction can be performed rapidly. It was recently applied for the extraction of HCBD from solid samples under 10.34 MPa and at 100 ℃. Purification could be achieved simultaneously by mixing florisil materials with samples in the ASE pool. Nevertheless, employing the ASE methods widely is difficult because of their high costs. Ultrasonic-assisted extraction (UAE) has the same extraction efficiency for HCBD, with much lower costs compared to ASE, and is therefore adopted by most researchers. The type of extraction solvent, solid-to-liquid ratio, ultrasonic temperature, and power affect the extraction efficiency. Ultrasonic extraction at 30 ℃ and 200 W using 30 mL dichloromethane as the extraction solvent resulted in acceptable recoveries (64.0%-69.4%) of HCBD in 2 g fly ash. After extraction, a clean-up step is necessary for the extracts of solid samples. Column chromatography is frequently used for purification. The combined use of several columns or a multilayer column filled with florisil, silica gel, acid silica gel, or alumina can improve the elimination efficiency of interfering substances.Instrumental analysis for HCBD is mainly performed with a gas chromatograph equipped with a mass spectrometer operating in selected ion monitoring mode. DB-5MS, HP-5MS, HP-1, ZB-5MS, and BP-5 can be used as the chromatographic columns. Qualification ions and quantification ions include m/z 225, 223, 260, 227, 190, and 188. GC-MS using an electron ionization (EI) source was more sensitive to HCBD than GC-MS using a positive chemical ionization source (PCI) and atmospheric pressure chemical ionization source (APCI). Gas chromatography-tandem mass spectrometry (GC-MS/MS), gas chromatography-high-resolution mass spectrometry (GC-HRMS), and high-resolution gas chromatography-high-resolution mass spectrometry (HRGC-HRMS) have recently been used for the separation and determination of HCBD and various other organic pollutants. Instrumental detection limits for HCBD in GC-MS/MS, GC-HRMS, and HRGC-HRMS were more than ten times lower than that in GC-MS, indicating the remarkable application potential of these high-performance instruments in HCBD analysis.

Atmospheric polychlorinated biphenyls in a non-metropolitan city in northern India: Levels, seasonality and sources

Recent studies from India reported polychlorinated biphenyls (PCBs) associated with incomplete combustion processes. In this study we have monitored atmospheric PCBs in Agra, a non-metropolitan city of northern India. During first month of summer and winter of 2017, polyurethane foam based passive air sampler (PUF-PAS) was deployed at each of 14 locations across urban, suburban and rural transects and one background site. Range of Σ₂₅PCBs varied between 25 and 1433 pg/m³ (Avg ± Stdev: 460 ± 461) in summer and 26-205 pg/m³ (Avg ± Stdev: 106 ± 59) in winter. Mean Σ₂₅PCBs concentration, showed an urban > suburban > rural trend in summer while, in winter a rural > urban > suburban trend was observed. PCB-52 was the dominant congener and after excluding this congener no significant difference was observed between summer and winter PCB concentrations. Using a combination of K-means cluster and principal component analysis (PCA) four major source types were identified. Open burning source accorded 80% of atmospheric PCBs, majorly indicator PCBs while the remaining 20% was contributed by atmospheric transport, petrogenic combustion and biomass burning. From the ten days back trajectory of the air mass it can be suggested that atmospheric transport from the hotspots resulted in a minor percentage of dioxin like PCBs in Agra. Maximum TEQs was accorded by PCB-77 (30%) and it is consistent with previous observations from Agra. Levels observed in the current study are well within the public health guideline based on inhalation unit risk (10 ng/m³) and United States Environmental Protection Agency's regional screening level high risk tier (4.9 ng/m³) for ambient air.

Polybrominated diphenyl ethers and organochloride pesticides in the organic matter of air suspended particles in Mexico valley: A diagnostic to evaluate public policies

The presence of organochlorine pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs) was analysed in air particulate matter ≤ 2.5 μm (PM_2.5) and ≤10 μm (PM₁₀) collected in the Metropolitan Zone of Mexico Valley (MZMV), during 2013 and 2014, respectively. Spatial and seasonal distributions of PM and their organic content named solvent extracted organic matter (SEOM) were determined. PM mass concentration and SEOM/PM ratios were compared with previous studies in 2006 in Mexico City. PM_2.5 concentration was like found in 2006, however, PM₁₀ decreased ∼43%. The SEOM/PM₁₀ ratio was kept constant, suggesting a decrease in SEOM as well as PM₁₀ emitted from natural sources, probably as a result of changes in the land use due to urban growth. A decrease ∼50% SEOM/PM_2.5 ratio was observed in the same period, linked to adequate strategies and public policies applied by the local and federal governments to control the organic matter emitted from anthropogenic sources. Seven out of sixteen OCPs and five out of six PBDEs were found. The most common POPs were endosulfan I, endosulfan II, endosulfan sulfate, BDE-47 and BDE-99, present on >90% of the sampling days. OCPs in PM_2.5 and PBDEs in PM₁₀ showed seasonal variability. Higher PBDEs concentration in both particle sizes were observed at east and southeast of the MZMV, where one of the biggest landfills and wastewater treatment plants are located. OCPs in PM₁₀ were mainly emitted from agricultural areas located to the southwest, southeast and east of the MZMV. OCPs in PM_2.5 showed a regional contribution from the north and introduced into the valley. OCP degradation products were dominant over native OCPs, indicating no fresh OCP use. POPs comparison with other cities was made. Agreements and commissions created by the Mexican government reduced OCPs emissions, however, more effort must be made to control PBDE emission sources.

Natural archives of long-range transported contamination at the remote lake Letšeng-la Letsie, Maloti Mountains, Lesotho

Naturally accumulating archives, such as lake sediments and wetland peats, in remote areas may be used to identify the scale and rates of atmospherically deposited pollutant inputs to natural ecosystems. Co-located lake sediment and wetland cores were collected from Letšeng-la Letsie, a remote lake in the Maloti Mountains of southern Lesotho. The cores were radiometrically dated and analysed for a suite of contaminants including trace metals and metalloids (Hg, Pb, Cu, Ni, Zn, As), fly-ash particles, stable nitrogen isotopes, polycyclic aromatic hydrocarbons (PAHs) and persistent organic pollutants such as polychlorinated biphenyls (PCBs), polybrominated flame retardants (PBDEs) and hexachlorobenzene (HCB). While most trace metals showed no recent enrichment, mercury, fly-ash particles, high molecular weight PAHs and total PCBs showed low but increasing levels of contamination since c.1970, likely the result of long-range transport from coal combustion and other industrial sources in the Highveld region of South Africa. However, back-trajectory analysis revealed that atmospheric transport from this region to southern Lesotho is infrequent and the scale of contamination is low. To our knowledge, these data represent the first palaeolimnological records and the first trace contaminant data for Lesotho, and one of the first multi-pollutant historical records for southern Africa. They therefore provide a baseline for future regional assessments in the context of continued coal combustion in South Africa through to the mid-21st century.

Passive air sampling for semi-volatile organic chemicals

During passive air sampling, the amount of a chemical taken up in a sorbent from the air without the help of a pump is quantified and converted into an air concentration. In an equilibrium sampler, this conversion requires a thermodynamic parameter, the equilibrium sorption coefficient between gas-phase and sorbent. In a kinetic sampler, a time-averaged air concentration is obtained using a sampling rate, which is a kinetic parameter. Design requirements for kinetic and equilibrium sampling conflict with each other. The volatility of semi-volatile organic compounds (SVOCs) varies over five orders of magnitude, which implies that passive air samplers are inevitably kinetic samplers for less volatile SVOCs and equilibrium samplers for more volatile SVOCs. Therefore, most currently used passive sampler designs for SVOCs are a compromise that requires the consideration of both a thermodynamic and a kinetic parameter. Their quantitative interpretation depends on assumptions that are rarely fulfilled, and on input parameters, that are often only known with high uncertainty. Kinetic passive air sampling for SVOCs is also challenging because their typically very low atmospheric concentrations necessitate relatively high sampling rates that can only be achieved without the use of diffusive barriers. This in turn renders sampling rates dependent on wind conditions and therefore highly variable. Despite the overall high uncertainty arising from these challenges, passive air samplers for SVOCs have valuable roles to play in recording (i) spatial concentration variability at scales ranging from a few centimeters to tens of thousands of kilometers, (ii) long-term trends, (iii) air contamination in remote and inaccessible locations and (iv) indoor inhalation exposure. Going forward, thermal desorption of sorbents may lower the detection limits for some SVOCs to an extent that the use of diffusive barriers in the kinetic sampling of SVOCs becomes feasible, which is a prerequisite to decreasing the uncertainty of sampling rates. If the thermally stable sorbent additionally has a high sorptive capacity, it may be possible to design true kinetic samplers for most SVOCs. In the meantime, the passive air sampling community would benefit from being more transparent by rigorously quantifying and explicitly reporting uncertainty.

Atmospheric concentration, source identification, and health risk assessment of persistent organic pollutants (POPs) in two countries: Peru and Turkey

It is known that some persistent organic pollutants (POPs) are used worldwide, and these pollutants are dangerous for human health. However, there are still countries where measurements of these pollutants have not been adequately measured. Although many studies have been published for determining the concentrations of POPs in Turkey, there are limited studies in Latin American countries like Peru. For this reason, it is essential both to conduct a study in Peru and to compare the study with another country. This study is aimed at determining the atmospheric POPs such as polycyclic aromatic hydrocarbon (PAH), organochlorine pesticide (OCP), and polychlorinated biphenyl (PCB) concentrations using passive air samplers in Yurimaguas (Peru) and Bursa (Turkey). Molecular diagnosis ratios and ring distribution methods were used to determine the sources of PAHs. According to these methods, coal and biomass combustions were among the primary sources of PAHs in Peru, while petrogenic and petroleum were the primary sources of PAHs in Turkey. Then, α-HCH/γ-HCH and β-/(α+γ)-HCH ratios were used to determine the sources of OCPs. According to the α-HCH/γ-HCH ratios, the primary sources of OCPs in both countries were lindane. Similarly, according to β-/(α+γ)-HCH ratios, the HCHs have been historically used in Peru while they were recently utilized in Turkey. Finally, homologous group distributions were used to determine the sources of PCBs. Similar distributions of homologous groups were observed in the sampling sites in both countries. Also, the homologous group distributions obtained have been determined that industrial activities could be effective in the sampling areas in both countries. When the cancer risks that could occur via inhalation were evaluated, no significant cancer risk has been determined in both countries.

Spatial distribution and seasonal variations of atmospheric organophosphate esters (OPEs) in Tianjin, China based on gridded field observations

The atmospheric concentrations of 14 organophosphate esters (OPEs) were monitored by passive air sampling at 33 sites to determine their spatial distributions, and seasonal variations (summer and winter) in Tianjin, North China. The total concentrations of the OPEs (∑₉OPEs) in the summer ranged from 0.08 to 1113 ng/sample with a median of 98.4 ng/sample, which was non-statistically different from the concentrations obtained in the winter (which ranged from 1.93 to 548 ng/sample with a median of 46.2 ng/sample). Among the observed OPEs, the concentrations of TnBP and TCiPP were statistically higher in the summer compared with the winter (p < 0.05). For grouped OPEs, only a significantly higher level of chlorinated OPEs was found in summer than that in winter. In the winter, spatial differences were found to be significantly different between the concentrations of TnBP, TiBP, TCEP, and TEHP in the suburban and rural areas (p < 0.05). Considering the possible point-sources, in the summer, the concentrations of TDCPP, TCiPP, DPEHP, TEHP, and the total concentration of TCPs (denoted as ∑₃TCP, comprised of the concentrations of TCP, TmCP, and ToCP) in an electronic-waste (e-waste) dismantling area were higher than those obtained at the other sampling sites. ∑₉OPEs at the e-waste site and another site located near a manufacturing plant of organophosphate flame retardants (OFRs) were both higher than the median concentrations obtained at the other sampling sites, and TCiPP was the most abundant pollutant. In the winter, the concentrations of ∑₉OPEs at the e-waste site were still higher than their median concentrations at the other sites. Because OPEs are used in aircraft lubricating oils and hydraulic fluids, an airport was thought to be another important source of TiBP and TPhP in the present study. Therefore, the e-waste site, airport, and OFR manufacturing plant may be the major sources of OPEs in the environment.

Spatially high-resolved monitoring and risk assessment of polycyclic aromatic hydrocarbons in an industrial city

Polycyclic aromatic hydrocarbons (PAHs) were monitored at 20 sites in semi-rural, urban, and industrial areas of Ulsan, the largest industrial city in South Korea, for one year. The target compounds were the 16 priority PAHs designated by the US Environmental Protection Agency except for naphthalene, acenaphthene, and acenaphthylene. Gaseous PAHs collected using polyurethane foam-based passive air samplers (PUF-PASs) and particulate PAHs predicted using gas/particle partitioning models were used to estimate the human health risks. The mean total cancer risk through inhalation intake and dermal absorption for all target age groups (children, adolescents, adults, and lifetime) ranged from 0.10 × 10^-7 to 2.62 × 10^-7, lower than the acceptable risk level (10^-6), thus representing a safe level for residents. The cancer risk through dermal absorption and inhalation intake was predicted to be highest in winter, mostly due to the higher concentrations of PAHs, especially high-molecular-weight species with greater toxicity. Additionally, gaseous and particulate PAHs contributed more to dermal absorption and inhalation intake, respectively. As a consequence of local emissions and advection, the risks were higher in the industrial and semi-rural areas. This study suggests that human health risks can be cost-effectively mapped on a local scale using passive air sampling.

Indoor persistent organic pollutants in agricultural areas from Argentina

Persistent Organic Pollutants (POPs) are anthropogenic chemicals extensively used in the past for industrial and agricultural purposes, characterized by their lipophilicity, ubiquity, volatility and environmental persistence. By other hand, chlorpyrifos is the most widely used current pesticide (CUPs) being the main insecticide used for crops in Argentina. The aim of this work was to assess levels of POPs and CUPs in different fractions of airborne particles collected indoor in agricultural areas from Argentina. Particles higher than 2.5 µm were trapped in polyurethane foams (PUF) while particles smaller than 1 µm and volatile compounds were adsorbed on activated charcoal. Compounds were analyzed by gas chromatograph with electron capture detector (GC-ECD). Endosulfans, chlordanes, PCBs, and HCHs were detected in all PUF samples, while endosulfans, chlorpyrifos, PCBs, and HCHs were the most abundant in smaller particles. Majority of pesticides showed higher concentrations during the summer season (1397.7 vs 832.5 pg/m³ ). Even adding up all measured organic compounds, no sample reaches the threshold limit value for indoor pesticides levels (0.1 pg/m³ ), neither in the large or small particle fraction. However, the fact that chronic exposure to POPs has been linked to several diseases raises concern for human health.

Pine needle and semi-permeable membrane device derived organochlorine compounds (OCPs) concentrations in air in Mersin Province to Taurus, Turkey

Organochlorine pesticides (OCPs) were analyzed in three different ages (half-, 1.5-, 2.5-year-old) for needles and semi permeable membrane devices (SPMDs) at three deployment periods from sea level to 1881 meter above sea level. Individual HCHs concentrations ranged between 1.4 and 129 pg/g fw depending on the age and sampling season while 2.5-year-old needles showed higher HCHs levels compared to half and 1.5- year-old. Correlation between elevation and HCH concentration in SPMDs was found but not in needle samples. Concentrations of HCHs in SPMDs indicated clearly cold condensation effect on accumulation in winter period and increased with altitude. Concentrations of DDTs in half and 1.5-year-old needles were lower than 2.5-year-old needles. The highest total concentration of DDTs was detected in 1-year-period SPMD. Higher concentrations were found in 2.5-year-old needles for other OCPs. Seasonal and altitude-dependent changes were not observed for other OCPs in SMPDs. Total accumulation of OCPs in SPMDs were found higher than in needles. On the contrary, an increased accumulation rate was observed for HCHs in SPMD. In general, Total concentrations of DDTs and HCHs were similar to total of other OCPs in all altitudes when dominating endosulfan wasnot taken into account in the computation of total concentration of other OCPs.

Quantification of persistent organic pollutants in dietary supplements using stir bar sorptive extraction coupled with GC-MS/MS and isotope dilution mass spectrometry

In this work, we describe a method developed to quantify persistent organic pollutants (POPs) including polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) in dietary supplement samples using stir-bar sorptive extraction (SBSE)-GC-MS/MS-isotope dilution mass spectrometry (IDMS). This method enables accurate, precise, and sensitive quantification of POPs in plant-extract based dietary supplement products commercially available in the United States. When compared with calibration curves, IDMS provided more accurate and precise measurements. The mean error of measurements using this method was 7.24% with a mean RSD of 8.26%. The application of GC-MS/MS enabled approximately two-order-of-magnitude lower limit of quantifications compared with GC-MS. 12 commercially available plant-extract based dietary supplement samples were analysed using this method. PAHs including naphthalene, acenaphthene, fluorene, phenanthrene, fluoranthene, pyrene, chrysene, and benzo[a]pyrene were detected in most of the products and had average concentrations over 1 ng/g. OCPs were detected less frequently than PAHs in these products, and none of the OCPs had mean concentrations over 1 ng/g. The mean toxin concentration of each product was calculated, and the highest value was 3.20 ng/g. These results were compared with existing guidelines and none of the analytes in the samples were found to be above the daily allowable limits.

Polyurethane foam-based passive air sampling for simultaneous determination of POP- and PAH-related compounds: A case study in informal waste processing and urban areas, northern Vietnam

Polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), hexabromobiphenyl (BB-153), novel brominated flame retardants (NBFRs), and unsubstituted/methylated polycyclic aromatic hydrocarbons (PAHs/Me-PAHs) were simultaneously monitored in the air samples collected from Vietnamese urban and vehicular waste processing areas by using polyurethane foam-based passive air sampling (PUF-PAS) method. Concentrations (pg m^-3) of organic pollutants decreased in the order: PAHs (median 29,000; range 5100-100,000) > Me-PAHs (6000; 1000-33,000) > PCBs (480; 170-1100) > PBDEs (11; 5.3-86) > NBFRs (0.20; n. d. - 51) > BB-153 (n.d.). The difference in total PCB and PBDE concentrations between the urban and waste processing air samples was not statistically significant. Meanwhile, levels of PAHs, Me-PAHs, benzo [a]pyrene equivalents (BaP-EQs), and toxic equivalents of dioxin-like PCBs (WHO-TEQs) were much higher in the waste processing sites. This is the first report on the abundance of mono- and di-CBs (notably CB-11) in the air from a developing country, suggesting their roles as emerging and ubiquitous air pollutants. Our results have indicated potential sources of specific organic pollutants such as dioxin-like PCBs, PAHs, and Me-PAHs from improper treatment of end-of-life vehicles and other vehicle related materials (e.g., waste oils and rubber tires), as well as current emission of PCBs and PBDEs in the urban area in Vietnam. Further atmospheric monitoring studies should be conducted in this developing country that cover both legacy and emerging contaminants with a focus on areas affected by rapid urbanization and informal waste processing activities.

Concentrations and distributions of polybrominated diphenyl ethers (PBDEs) in surface soils and tree bark in Inner Mongolia, northern China, and the risks posed to humans

Three functional zones, namely the industrial (IND), the agricultural (AGR), and the grassland (GRA) areas from Inner Mongolia (a remote province in northern China), were selected to evaluate the levels and distributions of PBDEs and the risks posed to local humans. PBDEs concentrations in surface soils and tree bark were detected and the air levels were estimated based on bark measurements. The total concentrations (∑₈PBDEs) of BDE-28, -47, -100, -99, -154, -153, -183, and -209 in soils were 1.71-64.9 ng/g dry weight (d.w.), 0.720-4.08 ng/g d.w., and 0.604-3.76 ng/g d.w. in the IND, AGR and GRA areas respectively. The average total concentrations in bark and air were 0.792 ng/g d.w. and 0.125 ng/m³ in the AGR areas respectively, which were lower than those (1.69 ng/g d.w. in the bark and 0.476 ng/m³ in the air) in the IND areas. BDE-209 was the dominant congener, consistent with DeBDE being the dominant commercial products used in China. However, except for BDE-209, BDE-28 and BDE-47 in the AGR and GRA areas averagely contributed about half of the total PBDEs concentrations in soils. BDE-28 concentrations in the bark samples of the AGR areas were significantly higher (p < 0.05) than in the IND areas, and the average total hazard quotients (∑₈PBDEs) were higher for humans in the AGR areas (0.12) than in the IND areas (0.08). Degradation of higher-brominated congeners (e.g., BDE-209) and migration of lower-brominated congeners (mainly BDE-28 and BDE-47) may increase the risks to humans in pristine areas.