Chalcogen rich lanthanide clusters from halide starting materials (II): selenido compounds

Dinuclear ytterbium(III) benzamidinate complexes with bridging S32-, Se22- and Te22- ligands: synthesis, structure and magnetic properties

Treatment of Yb(II) complex [L2Yb(THF)2] (L = PhC(NSiMe3)2) with elemental sulfur, selenium or tellurium resulted in the isolation of a series of dinuclear Yb(III) complexes featuring side-on bound S32- (1), Se22- (2) or Te22- (3) moieties, respectively. Magnetic study on these complexes revealed that 3 is a rare lanthanide telluride single-molecule magnet (SMM).

Cerocene and Lanthanocene Chalcogenides: Synthesis, Structure, and Luminescence

A series of lanthanide chalcogenides {[η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln}₂(μ-η²:η²-Te₂) (Ln = Ce 1, La 2), {[η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln(THF)}₂(μ-Se) (Ln = Ce 3, La 4), and {[η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln(THF)}₂(μ-Te) (Ln = Ce 5, La 6) can be readily obtained by the reaction of the alkyl complexes [η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln(CH₂C₆H₄-o-NMe₂) with elemental selenium or tellurium in the presence of 9-borabicyclo[3.3.1]nonane (9-BBN). The reaction of the alkyl complexes [η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln(CH₂C₆H₄-o-NMe₂) with 9-BBN in 1:2 molar ratio afforded the lanthanide (cyclooctane-1,5-diyl)dihydroborate complexes [η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln[(μ-H)₂BC₈H₁₄] (Ln = Ce 7, La 8) concomitant with the (Me₂N-o-C₆H₄CH₂)BC₈H₁₄ release, indicating that [η⁵-1,3-(Me₃C)₂C₅H₃]₂LnH may be the reactive species for the synthesis of lanthanide chalcogenides. All the new compounds were characterized by various spectroscopic methods, and their solid-state structures were further confirmed by single-crystal X-ray diffraction analyses. Luminescence spectroscopy was also employed to characterize complexes 1-6. The Ce(III) complexes 3 and 5 display distinct luminescence properties at room temperature, as compared to the corresponding La(III) complexes 4 and 6. The complex {[η⁵-1,3-(Me₃C)₂C₅H₃]₂Ce(THF)}₂(μ-Te) (5) exhibits unexpectedly red emission in solution which is found to depend strongly on the excitation wavelength.

Stabilization of dichalcogenide ligands in the coordination sphere of a ruthenium system

The synthesis, structure and electronic properties of tetraruthenium dichalcogenide complexes displaying the exclusive coordination mode of dichalcogenide ligands have been discussed. The reactions of Li[BH₂E₃] (E = S or Se) with [ClRu(μ-Cl)(p-cymene)]₂ (p-cymene = η⁶-{p-C₆H₄(ⁱPr)Me}) at room temperature yielded tetrametallic dichalcogenide complexes [{Ru₂Cl₂(p-cymene)₂}₂(μ₄,η²-E₂)], 1-2 (E = S (1) and Se (2)). The solid-state X-ray structure of 1 shows that two {(p-cymene)RuCl}₂ moieties are bridged by a S-S bond. In addition to 2, the reaction of Li[BH₂Se₃] with [ClRu(μ-Cl)(p-cymene)]₂ also yielded a mononuclear tris-homocubane analogue [Ru(p-cymene){Se₇(BH)₃}] (3) which is an analogue of 1,3,3-tris-homocubane and possesses D₃ symmetry. In order to isolate the Cp* analogue of 1, the reaction of [Cp*Ru(μ-Cl)Cl]₂ with Li[BH₂S₃] was carried out, which led to the formation of bis/tris-homocubane derivatives [(Cp*Ru)₂{μ-S_n(BH)₂}] (n = 7 (4) and 6 (5)) along with the formation of ruthenium disulfide complexes [(RuCp*)₂(μ,η²:η²-S₂)(μ,η¹:η¹-S₂)] and [(RuCp*)₂(μ-SBHS-κ¹B:κ²S:κ²S)(μ,η¹:η¹-S₂)]. Complexes 1-5 have been characterized by multi-nuclear NMR, IR, UV-vis spectroscopy, and mass spectrometry and their molecular formulations (except 2) have been determined by single crystal X-ray crystallography. Furthermore, DFT calculations were performed that rationalize the stabilization of the dichalcogenide units (E₂^2-) by the tetrametallic systems in 1-2.

(thf)2Ln(Ge9{Si(SiMe3)3}3)2 (Ln = Eu, Sm): the first coordination of metalloid germanium clusters to lanthanides

We report the synthesis, structure and magnetic properties of the first rare earth complexes of metalloid group 14 clusters [(thf)2Ln(Ge9Hyp3)2] (Ln = Eu, Sm, Hyp = Si(SiMe3)3). X-Ray crystallographic analysis and DFT calculations reveal a novel η2-coordination mode of the Ge9Hyp3 units and a slight distortion of the Ge9 cage.

Multi-electron reduction of sulfur and carbon disulfide using binuclear uranium(iii) borohydride complexes

The first use of a dinuclear UIII/UIII complex in the activation of small molecules is reported. The octadentate Schiff-base pyrrole, anthracene-hinged 'Pacman' ligand LA combines two strongly reducing UIII centres and three borohydride ligands in [M(THF)4][{U(BH4)}2(μ-BH4)(LA)(THF)2] 1-M, (M = Li, Na, K). The two borohydride ligands bound to uranium outside the macrocyclic cleft are readily substituted by aryloxide ligands, resulting in a single, weakly-bound, encapsulated endo group 1 metal borohydride bridging the two UIII centres in [{U(OAr)}2(μ-MBH4)(LA)(THF)2] 2-M (OAr = OC6H2t Bu3-2,4,6, M = Na, K). X-ray crystallographic analysis shows that, for 2-K, in addition to the endo-BH4 ligand the potassium counter-cation is also incorporated into the cleft through η5-interactions with the pyrrolides instead of extraneous donor solvent. As such, 2-K has a significantly higher solubility in non-polar solvents and a wider U-U separation compared to the 'ate' complex 1. The cooperative reducing capability of the two UIII centres now enforced by the large and relatively flexible macrocycle is compared for the two complexes, recognising that the borohydrides can provide additional reducing capability, and that the aryloxide-capped 2-K is constrained to reactions within the cleft. The reaction between 1-Na and S8 affords an insoluble, presumably polymeric paramagnetic complex with bridging uranium sulfides, while that with CS2 results in oxidation of each UIII to the notably high UV oxidation state, forming the unusual trithiocarbonate (CS3)2- as a ligand in [{U(CS3)}2(μ-κ2:κ2-CS3)(LA)] (4). The reaction between 2-K and S8 results in quantitative substitution of the endo-KBH4 by a bridging persulfido (S2)2- group and oxidation of each UIII to UIV, yielding [{U(OAr)}2(μ-κ2:κ2-S2)(LA)] (5). The reaction of 2-K with CS2 affords a thermally unstable adduct which is tentatively assigned as containing a carbon disulfido (CS2)2- ligand bridging the two U centres (6a), but only the mono-bridged sulfido (S)2- complex [{U(OAr)}2(μ-S)(LA)] (6) is isolated. The persulfido complex (5) can also be synthesised from the mono-bridged sulfido complex (6) by the addition of another equivalent of sulfur.

Highly NIR-emissive lanthanide polyselenides

Ln(SePh)(3) (Ln = Ce, Pr, Nd), prepared by reduction of PhSeSePh with elemental Ln and Hg catalyst, reacts with excess elemental Se to give (py)(11)Ln(7)Se(21)HgSePh, an ellipsoidal polyselenide cluster. The molecular structure contains two square arrays of eight- or nine-coordinate Ln fused at one edge to form a V shape that is also capped on the concave side by a centrally located nine-coordinate (Se(3))pyLn(Se(3)) and on the convex side by a 2-fold disordered SeHgSePh. The central Ln coordinates to selenido, triselenido, and pyridine ligands, while all other Ln coordinate to selenido, diselenido, triselenido, and pyridine ligands. Thermal treatment of the Pr compound at 650 °C gave Pr(2)Se(3) and Pr(3)Se(4). NIR emission studies of the Nd compound show four transitions from the excited-state (4)F(3/2) ion to (4)I(9/2), (4)I(11/2), (4)I(13/2), and (4)I(15/2) states. The (4)F(3/2) ion to (4)I(11/2) transition (1075 nm emission) exhibited 43% quantum efficiency. This is the highest quantum efficiency reported for a 'molecular' Nd compound and leads a group of selenide-based clusters that has shown extraordinary quantum efficiency. In terms of efficiency and concentration, these compounds compare favorably with solid-state materials.

Covalent bonding and the trans influence in lanthanide compounds

A pair of mer-octahedral lanthanide chalcogenolate coordination complexes [(THF)(3)Ln(EC(6)F(5))(3) (Ln = Er, E = Se; Ln = Yb, E = S)] have been isolated and structurally characterized. Both compounds show geometry-dependent bond lengths, with the Ln-E bonds trans to the neutral donor tetrahydrofuran (THF) significantly shorter than the Ln-E bonds that are trans to negatively charged EC(6)F(5) ligands. Density functional theory calculations indicate that the structural trans influence evidenced by the differences in these bond lengths results from a covalent Ln-E interaction involving ligand p and Ln 5d orbitals.

U(IV) Chalcogenolates Synthesized via Oxidation of Uranium Metal by Dichalcogenides

Treatment of uranium metal with dichalcogenides in the presence of a catalytic amount of iodine in pyridine affords molecular U(IV) chalcogenolates that do not require stabilizing ancillary ligands. Oxidation of U(0) by PhEEPh yields monomeric seven-coordinate U(EPh)4(py)3 (E = S(1), Se(2)). The dimeric eight-coordinate complexes [U(EPh)2(mu2-EPh)2(CH3CN)2]2 (E = S(3), Se(4)) are obtained by crystallization from solutions of 1 and 2 dissolved in acetonitrile. Oxidation of U(0) by pySSpy and crystallization from thf yields nine-coordinate U(Spy)4(thf) (5). Incorporation of elemental selenium into the oxidation of U(0) by PhSeSePh results in the isolation of [U(py)2(SePh)(mu3-Se)(mu2-SePh)]4.4py (6), a tetrameric cluster in which each U(IV) ion is eight-coordinate and the U4Se4 core forms a distorted cube. The compounds were analyzed spectroscopically and the single-crystal X-ray structures of 1 and 3-6 were determined. The isolation of 1-6 represents six new examples of actinide chalcogenolates and allows insight into the nature of "hard" actinide ion-"soft" chalcogen donor interactions.

V4S9Br4: A Novel High-Spin Vanadium Cluster Thiobromide with Square-Planar Metal Core

The novel vanadium thiobromide, V4S9Br4, with a square-planar metal cluster core was synthesized and characterized by single-crystal X-ray diffraction, measurements of magnetic properties and the heat capacity, and DFT calculations of the electronic structure. At the room temperature, the compound displays paramagnetic properties with an independent spin on each V atom and with a weak exchange constant (J approximately 10 cm(-1)). The paramagnetic state is transformed into a low-spin state (AF-type ordering) at low temperatures. This change is accompanied by a heat-capacity anomaly. The observed magnetic and heat-capacity anomalies can be explained by the thermal excitation of electrons on the closely spaced molecular energy levels in the presence of the Jahn-Teller effect.

Oxoselenido Clusters of the Lanthanides: Rational Introduction of Oxo Ligands and Near-IR Emission from Nd(III)

Reactions of Ln(SePh)3 with SeO2 in THF give octanuclear oxoselenido clusters with the general formula (THF)8Ln8O2Se2(SePh)16 (Ln = Ce, Pr, Nd, Sm). In this isomorphous series, the eight Ln(III) ions are connected in the center by a pair of mu3-O2- ligands and mu5-Se2- ligands, with 14 bridging and two terminal selenolate ligands capping the cluster surface. Thermal decomposition at 700 degrees C of the Nd compound in vacuo led to the formation of a phase mixture of NdSe2, Nd2Se3, and Nd2O3. Near-IR emission experiments on the (THF)8Nd8O2Se2(SePh)16 and the fluorinated thiolate compound (DME)2Nd(SC6F5)3 demonstrate that clusters with oxo ligands are not only highly emissive, but also they emit at wavelengths not found in conventional oxides.

Synthesis and Structure of Ta4S9Br8. An Emergent Family of Early Transition Metal Chalcogenide Clusters

Single crystals of Ta4S9Br8 are obtained by heating Ta, S, and Br2 at 400 degrees C in a 4.0:9.0:4.0 molar ratio in a 44% yield. The structure was determined by X-ray analysis and consists of molecular clusters [Ta4(mu4-S)(mu-S2)4Br8]. The tantalum atoms form a square with long Ta...Ta distances (3.30 angstroms), with four S2 ligands bridging the Ta-Ta edges and one capping the square. Each Ta atom has two terminal bromine atoms. The compound is diamagnetic and has only two electrons for metal-metal bonding. IR and Raman spectral studies with the use of 34S allow to identify characteristic vibrations S-S (537 cm(-1)) and Ta4-mu4-S (407 cm(-1)). The compound is soluble in CH3CN, giving a dark-red solution with a characteristic electronic spectrum, which was assigned on the base of DFT calculations. ESI-MS spectra of the solutions show formation of [[Ta4S9Br8]Br]- associates.

Heterometallic Chalcogenido Clusters Containing Lanthanides and Main Group Metals: Emissive Precursors to Ternary Solid-State Compounds

Heterometallic clusters containing lanthanides and the group 12 metals can be isolated as crystalline compounds in high yields. These products [(py)8Ln4M2Se6(SePh)4 (Ln = Er, Yb, Lu; M = Cd, Hg)] adopt a double cubane structure with the covalent M occupying an opposing pair of external metal sites. Both Er/M compounds are strongly emissive materials, with emission lifetimes of 1.41 ms (Er/Cd) and 0.71 ms (Er/Hg) and with the Er/Cd radiative quantum efficiency twice that of the Er/Hg compound. Thermal decomposition of the Er/Cd and Yb/Cd compounds at 650 degrees C give the ternary solid-state materials CdLn2Se4.

Lanthanide Clusters with Internal Ln: Fragmentation and the Formation of Dimers with Bridging Se2- and Se22- Ligands

Reactions of "LnI(x)(SePh)(3-x)" (Ln = Dy, Ho) with elemental S/Se give (THF)14Ln10S6(Se2)6I6. The compounds are composed of a Ln6S6 double cubane core, with two twisted "Ln2(SeSe)3" units condensed onto opposing rectangular sides of the Ln6S6 fragment. This deposition of Ln2Se6 totally encapsulates the two central Ln's with chalcogen atoms (four S and four Se atoms), excluding neutral THF donors or iodides from the two primary coordination spheres. Reactions of Ln(10) clusters with a stronger Lewis base result in fragmentation and, in the case of Ln = Er, the isolation of (py)6Er2(Se2)(S0.8Se0.2)I2, with two Ln(III) ions spanned by E2- and (EE)2- ligands. The related homochalcogen dimers (py)6Ln2(Se2)(Se)Br2 (Ln = Ho, Yb) were prepared to establish that such molecules could be prepared rationally, and to confirm the isolability of E2- ligands coordinated to only two sterically unconstrained Ln ions.

Synthesis, Structure, and Ligand-Based Reduction Reactivity of Trivalent Organosamarium Benzene Chalcogenolate Complexes (C5Me5)2Sm(EPh)(THF) and [(C5Me5)2Sm(μ-EPh)]2

To compare the ligand-based reduction chemistry of (EPh)(-) ligands in a metallocene environment to the sterically induced reduction chemistry of the (C(5)Me(5))(-) ligands in (C(5)Me(5))(3)Sm, (C(5)Me(5))(2)Sm(EPh) (E = S, Se, Te) complexes were synthesized and treated with substrates reduced by (C(5)Me(5))(3)Sm: cyclooctatetraene; azobenzene; phenazine. Reactions of PhEEPh with (C(5)Me(5))(2)Sm(THF)(2) and (C(5)Me(5))(2)Sm produced THF-solvated monometallic complexes, (C(5)Me(5))(2)Sm(EPh)(THF), and their unsolvated dimeric analogues, [(C(5)Me(5))(2)Sm(mu-EPh)](2), respectively. Both sets of the paramagnetic benzene chalcogenolate complexes were definitively identified by X-crystallography and form homologous series. Only the (TePh)(-) complexes show reduction reactivity and only upon heating to 65 degrees C.

Lanthanide Clusters with Internal Ln Ions: Highly Emissive Molecules with Solid-State Cores

"Er(SePh)(2.5)I(0.5)" reacts with elemental S to give (THF)10Er6S6I6, a double cubane cluster with one face of the Er4S4 cube capped by an additional Er2S2. Reactions with a mixture of elemental S/Se results in the formation of (THF)14Er10S6(Se2)6I6, a cluster composed of an Er6S6 double cubane core, with two "Er2(Se2)3" units condensed onto opposing rectangular sides of the Er6S6 fragment. This deposition of Er2Se6 totally encapsulates the two central Er with chalcogen atoms (4 S, 4 Se) and excludes neutral THF donors or iodides from the two primary coordination spheres. The Er10 compound is the first lanthanide cluster to contain internal, chalcogen encapsulated Ln. This cluster shows strong fluorescence at 1544 nm with a measured decay time of 3 ms and an estimated quantum efficiency of 78%, which is comparable to Er doped solid-state materials. The unusual fluorescence spectral properties of (THF)14Er10S6Se12I6 are unprecedented for a molecular Er complex and are attributed to the low phonon energy host environment provided by the I-, S(2-), and Se2(2-) ligands.

Synthesis and Characterization of a Novel Tantalum Chalcogen-Rich Molecular Cluster with Square Planar Metal Core

Black single crystals of Ta(4)Se(9)I(8) are obtained in a high yield by heating Ta, Se, and I(2) at 300 degrees C in 1:2.2:1.0 molar ratio. In the structure, the tantalum atoms form a square, with four Se(2) ligands bridging the Ta-Ta edges and one capping the square. Each Ta atom has two terminal iodine atoms. The compound is diamagnetic and has only two electrons for metal-metal bonding.

Heterometallic Lanthanide Group 12 Metal Iodides

Neodymium tri-iodide reacts with Group 12 metal (M; M = Zn, Cd, Hg) iodides to form heterometallic compounds. These Lewis acidic M cleave Nd-I bonds to give either ionic ([(THF)(5)NdI(2)][MI(3)THF]; M = Zn, Cd) or charge-neutral [(THF)(5)NdI(micro(2)I)HgI(3)] compounds. Differences in structure are interpreted primarily in terms of M-L bond strengths, rather than Nd-L bond strengths. Experiments with Yb indicate that if there is any excess iodide present in these syntheses then the most readily isolated product is a triiodide salt, i.e., [(THF)(5)YbI(2)][I(3)]. In conventional solvents the presence of Lewis acid is not required for iodide displacement-from pyridine, "YbI(3)" crystallizes as [(py)(5)YbI(2)][I]. These compounds are potentially useful as heterometallic sources of lanthanide-doped iodide matrixes, they illustrate the ease with which iodides are displaced from lanthanide coordination spheres, and they underscore the complexity associated with using lanthanide iodides as Lewis acid catalysts.

Chalcogens as Terminal Ligands to Iron: Synthesis and Structure of Complexes with FeIII−S and FeIII−Se Motifs

Metal complexes with terminal chalcogenido ligands are known for the early transition-metal complexes, yet for the heavier congeners (e.g., sulfido and selenido), there are no analogous examples for the late 3d metal ions. Reported herein is the isolation and characterization of monomeric iron(III) complexes containing sulfido and selenido ligands; isolation was accomplished using the tripodal ligand tris[(N'-tert-butylureaylato)-N-ethylene]aminato ([H3buea]3-). The FeIII-E (E = S2-, Se2-) complexes were prepared from the iron(II) precursor, [FeII(H3buea)]2-, and the elemental forms of the chalogen. The formulation of [FeIIIH3buea(S)]2- and [FeIIIH3buea(Se)]2- as monomeric complexes with Fe-E units is supported by spectroscopic, analytical, and X-ray diffraction studies. For instance, X-band EPR spectra contain well-resolved axial signals, which are consistent with each complex having S = 5/2 ground states. The solid-state molecular structures reveal FeIII-E bond lengths of 2.211(1) and 2.355(1) A for [FeIIIH3buea(S)]2- and [FeIIIH3buea(Se)]2-, respectively. The primary coordination sphere for each complex also contains three deprotonated urea nitrogen atoms from [H3buea]3-; the apical amine nitrogen atom weakly interacts with the iron centers at distances of greater than 2.6 A. The terminal chalcogenido ligands appear to weakly hydrogen-bond with the urea NH groups of the [H3buea]3-; however, open H-bond cavities are observed for [FeIIIH3buea(S)]2- and [FeIIIH3buea(Se)]2-, which may contribute to their observed long-term instability.

Lanthanide−Transition Metal Chalcogenido Cluster Materials

[(THF)3Sm(SePh)2Zn(SePh)2]n decomposes to give a variety of products, including [(THF)8Sm4Se(SePh)8](2+)[Zn8Se(SePh)16](2-), an ionic cluster that can also be prepared in more than 60% yield by stoichiometric addition of Se to a mixture of Sm(SePh)3 and Zn(SePh)2. The isostructural Nd compound [(THF)8Nd4Se(SePh)8](2+)[Zn8Se(SePh)16](2-) was also prepared by the stoichiometric route to establish the viability of this cluster type with redox-inactive Ln. In addition, the salt [Yb(THF)6](3+)[Fe4Se4(SePh)4](3-) was isolated and structurally characterized. These ionic cluster materials illustrate the difficulties associated with doping Ln ions into covalent metal chalcogenido matrixes.

Facile pyrazolylborate ligand degradation at lanthanide centers: X-ray crystal structures of pyrazolylborinate-bridged bimetallics

Adventitious hydrolysis of a number of different complexes with the molecular formula Ln(Tp(Me2))(2)X [Tp(Me2) = (HB(dmpz)(3)), where X is a basic anionic ligand] in various solvents, yielded crystals of highly insoluble dimers of the general formula [Ln(Tp(Me2))(mu-BOp(Me2))](2) (1) [Ln = La, Ce, Sm; BOp(Me2) = (HBO(dmpz)(2))(2)(-); dmpzH = 3,5-dimethylpyrazole]. The results of several single-crystal X-ray determinations are reported. One metal nitrogen distance, that lying across from the two negatively charged bridging oxygen atoms, is 0.06 A longer than the others, suggesting an unusual trans influence at a lanthanide center. The formation of 1 is proposed to involve the intermediacy of Ln(Tp(Me2))(2)OH formed by protonolysis with adventitious water.

Chalcogen-rich lanthanide clusters with fluorinated thiolate ligands

Mixtures of Ln(SC(6)F(5))(3) and Ln(EPh)(3) (E = S, Se) react with elemental E to give chalcogen-rich clusters with fluorinated thiolate ancillary ligands. The structures of both (THF)(6)Yb(4)S(SS)(4)(SC(6)F(5))(2) and (THF)(6)Yb(4)Se(SeSe)(4)(SC(6)F(5))(2) have been established by low-temperature single-crystal X-ray diffraction. Both compounds contain a square array of Yb(III) ions connected by a central mu(4)-E(2-) ligand. The edges of the square Yb(4) array are bridged by four mu(2)(EE) ligands, and two terminal SC(6)F(5) are on the same side of the Ln(4) plane that is capped by the mu(4)-E(2-) ion. Redox inactive (THF)(6)Tm(4)Se(SeSe)(4)(SC(6)F(5))(2) was also prepared to establish the extension of this chemistry to the redox inactive Ln. These clusters are soluble in toluene.

Chalcogen-rich lanthanide clusters: compounds with Te(2-), (TeTe)(2-), TePh, TeTePh, (TeTeTe(Ph)TeTe)(5-), and [(TeTe)(4)TePh](9-) ligands; single source precursors to solid-state lanthanide tellurides

Lanthanide metals react with PhTeTePh and elemental Te in pyridine to give (py)(y)Ln(4)(Te)(TeTe)(2)(TeTeTe(Ph)TeTe)(Te(x)TePh) (Ln = Sm (y = 9; x = 0); Tb, Ho (y = 8, x = 0.1)), and (py)(7)Tm(4)(Te)[(TeTe)(4)TePh](Te(0.6)TePh) clusters. The Sm, Tb, and Ho compounds contain a square array of Ln(III) ions all connected to a central Te(2-) ligand. Two adjacent edges of the square are bridged by ditelluride ligands, with the Ln ion that is eta(2) bound to both of these TeTe ligands also coordinating to a terminal TePh ligand. The other two edges of the square are spanned by ditellurides that both coordinate a TePh ligand that has been displaced from the Ln ion by pyridine, to give the pentaanion (mu-eta(2)-eta(2)-Te(2)Te(Ph)Te(2)).(5-) In the Tm compound, the displaced TePh interacts with all four TeTe units. The compounds are air-, light-, and temperature-sensitive. Upon thermolysis, they decompose to give solid-state TbTe(2-x), HoTe, or TmTe, with elimination of Te and TePh(2).