Mineralization of Synthetic Polymer Scaffolds: A Bottom-Up Approach for the Development of Artificial Bone

Effect of the anti-Alzheimer drug GSK-3β antagonist on numerical modeling of the energy dissipation through the resin-dentin interface

OBJECTIVES

The aim of this study was to determine the viscoelastic performance and energy dissipation of conditioned dentin infiltrated with polymeric nanoparticles (NPs) doped with tideglusib (TDg) (TDg-NPs).

METHODS

Dentin conditioned surfaces were infiltrated with NPs and TDg-NPs. Bonded interfaces were created, stored for 24 h and submitted to mechanical and thermal challenging. Resin-dentin interfaces were evaluated through nano-DMA/complex-loss-storage moduli-tan delta assessment and atomic force microscopy (AFM) analysis.

RESULTS

Dentin infiltrated with NPs and load cycled attained the highest complex modulus at hybrid layer and bottom of hybrid layer. Intertubular dentin treated with undoped NPs showed higher complex modulus than peritubular dentin, after load cycling, provoking energy concentration and breakdown at the interface. After infiltrating with TDg-NPs, complex modulus was similar between peri-intertubular dentin and energy dissipated homogeneously. Tan delta at intertubular dentin was higher than at peritubular dentin, after using TDg-NPs and load cycling. This generated the widest bandwidth of the collagen fibrils and bridge-like mineral structures that, as sight of energy dissipation, fastened active dentin remodeling. TDg-NPs inducted scarce mineralization after thermo-cycling, but these bridging processes limited breakdown zones at the interface.

SIGNIFICANCE

TDg-based NPs are then proposed for effective dentin remineralization and tubular seal, from a viscoelastic approach.

Surface functionalization of hydroxyapatite nanoparticles for biomedical applications

This review completely covers the various aspects of hydroxyapatite (HAp) nanoparticles and their role in different biological situations, and provides the surface and interface contents on (i) hydroxyapatite nanoparticles and their hybridization with organic molecules, (ii) surface designing of hydroxyapatite nanoparticles to provide their biocompatibility and photofunction, and (iii) coating technology of hydroxyapatite nanoparticles. In particular, we summarized how the HAp nanoparticles interact with the different ions and molecules and highlighted the potential for hybridization between HAp nanoparticles and organic molecules, which is driven by the interactions of the HAp nanoparticle surface ions with several functional groups of biological molecules. In addition, we highlighted the studies focusing on the interfacial interactions between the HAp nanoparticles and proteins for exploring the enhanced biocompatibility. Such studies focus on how these interactions affect the hydration layers and protein adsorption. However, the hydration layer state involves diverse molecular interactions that can alter the shape of the adsorbed proteins, thereby affecting cell adhesion and spreading on the surfaces. We also summarized the relationship between the surface properties of the HAp nanoparticles and the hydration layer. Furthermore, we spotlighted the cytocompatible photoluminescent probes that can be developed by designing HAp/organic nanohybrid structures. We then emphasized the importance of photofunctionalization in theranostics, which involves the integration of diagnostics and therapy based on the surface design of the HAp nanoparticles. Furthermore, the coating techniques using HAp nanoparticles and HAp nanoparticle/polymer composites were outlined for fusing base biomaterials with biological tissues. The advantages of HAp/biocompatible polymer composite coatings include the ability to effectively cover porous or irregularly shaped surfaces while controlling the thickness of the coating layer, and the addition of HAp nanoparticles to the polymer matrix improves the mechanical properties, increases the roughness, and forms the morphologies that mimic bone nanostructures. Therefore, the fundamental design of hydroxyapatite nanoparticles and their surfaces was suggested from various aspects for biomedical applications.

Bioinspired mechanical mineralization of organogels

Mineralization is a long-lasting method commonly used by biological materials to selectively strengthen in response to site specific mechanical stress. Achieving a similar form of toughening in synthetic polymer composites remains challenging. In previous work, we developed methods to promote chemical reactions via the piezoelectrochemical effect with mechanical responses of inorganic, ZnO nanoparticles. Herein, we report a distinct example of a mechanically-mediated reaction in which the spherical ZnO nanoparticles react themselves leading to the formation of microrods composed of a Zn/S mineral inside an organogel. The microrods can be used to selectively create mineral deposits within the material resulting in the strengthening of the overall resulting composite.

Advances in biomimetic collagen mineralisation and future approaches to bone tissue engineering

With an ageing world population and ~20% of adults in Europe being affected by bone diseases, there is an urgent need to develop advanced regenerative approaches and biomaterials capable to facilitate tissue regeneration while providing an adequate microenvironment for cells to thrive. As the main components of bone are collagen and apatite mineral, scientists in the tissue engineering field have attempted in combining these materials by using different biomimetic approaches to favour bone repair. Still, an ideal bone analogue capable of mimicking the distinct properties (i.e., mechanical properties, degradation rate, porosity, etc.) of cancellous bone is to be developed. This review seeks to sum up the current understanding of bone tissue mineralisation and structure while providing a critical outlook on the existing biomimetic strategies of mineralising collagen for bone tissue engineering applications, highlighting where gaps in knowledge exist.

Synthesis, characterisation and evaluation of hyperbranched N-(2-hydroxypropyl) methacrylamides for transport and delivery in pancreatic cell lines in vitro and in vivo

Hyperbranched polymers have many promising features for drug delivery, owing to their ease of synthesis, multiple functional group content, and potential for high drug loading with retention of solubility. Here we prepared hyperbranched N-(2-hydroxypropyl)methacrylamide (HPMA) polymers with a range of molar masses and particle sizes, and with attached dyes, radiolabel or the anticancer drug gemcitabine. Reversible addition-fragmentation chain transfer (RAFT) polymerisation enabled the synthesis of pHPMA polymers and a gemcitabine-comonomer functionalised pHPMA polymer pro-drug, with diameters of the polymer particles ranging from 7-40 nm. The non-drug loaded polymers were well-tolerated in cancer cell lines and macrophages, and were rapidly internalised in 2D cell culture and transported efficiently to the centre of dense pancreatic cancer 3D spheroids. The gemcitabine-loaded polymer pro-drug was found to be toxic both to 2D cultures of MIA PaCa-2 cells and also in reducing the volume of MIA PaCa-2 spheroids. The non-drug loaded polymers caused no short-term adverse effects in healthy mice following systemic injection, and derivatives of these polymers labelled with ⁸⁹Zr-were tracked for their distribution in the organs of healthy and MIA PaCa-2 xenograft bearing Balb/c nude mice. Tumour accumulation, although variable across the samples, was highest in individual animals for the pHPMA polymer of ∼20 nm size, and accordingly a gemcitabine pHPMA polymer pro-drug of ∼18 nm diameter was evaluated for efficacy in the tumour-bearing animals. The efficacy of the pHPMA polymer pro-drug was very similar to that of free gemcitabine in terms of tumour growth retardation, and although there was a survival benefit after 70 days for the polymer pro-drug, there was no difference at day 80. These data suggest that while polymer pro-drugs of this type can be effective, better tumour targeting and enhanced in situ release remain as key obstacles to clinical translation even for relatively simple polymers such as pHPMA.

Biomimetic Organic-Inorganic Nanocomposite Scaffolds to Regenerate Cranial Bone Defects in a Rat Animal Model

While bone regenerates itself after an injury, a critical bone defect requires external interventions. Engineering approaches to restore bone provide a temporary scaffold to support the damage and provide beneficial biological cues for bone repair. Biomimetically generated scaffolds replicate the naturally occurring phenomena in bone regeneration. In this study, a gelatin-calcium phosphate nanocomposite was synthesized by an efficient and cost-effective double-diffusion biomimetic approach. Calcium and phosphate ions are impregnated in the gelatin, mimicking the natural bone mineralization process. Glutaraldehyde from 0.5 to 2 w/v% was used for gelatin cross-linking and mechanical properties of the scaffold, and its biological support for rat bone marrow mesenchymal stromal cells was analyzed. Analysis of scanning electron microscopy images of the nanocomposite scaffolds and Fourier transform infrared (FTIR) and X-ray diffraction (XRD) characterizations of these scaffolds confirmed precipitation of calcium phosphates in the gelatin. Moreover, lysozyme degradation assay showed that scaffold degradation reversely correlates with the concentration of the cross-linking agent. Increased glutaraldehyde concentrations enhanced the mechanical properties of the scaffolds, bringing them closer to those of cancellous bone. Rat bone marrow mesenchymal stromal cells maintained their viability on these scaffolds compared to standard cell culture plates. In addition, these cells showed differentiation into bone lineage as evaluated from alkaline phosphatase activity up to 21 days and Alizarin red staining of the cells over 28 days. Eventually, scaffolds were implanted in a cranial defect in a rat animal model with a 5 mm diameter. Bone regeneration was studied over 90 days. Analysis of histological sections of the injury and computer tomography images revealed that nanocomposite scaffolds cross-linked with 1% w/v glutaraldehyde provide the maximum bone regeneration after 90 days. Collectively, our data show that nanocomposite scaffolds developed here provide effective regeneration for extensive bone defects in vivo.

Diffusion-Controlled Crystallization of Calcium Phosphate in a Hydrogel toward a Homogeneous Octacalcium Phosphate/Agarose Composite

Diffusion-controlled crystallization in a hydrogel has been investigated to synthesize organic/inorganic hybrid composites and obtain a fundamental understanding of the detailed mechanism of biomineralization. Although calcium phosphate/hydrogel composites have been intensively studied and developed for the application of bone substitutes, the synthesis of homogeneous and integrated composites remains challenging. In this work, diffusion-controlled systems were optimized by manipulating the calcium ion flux at the interface, concentration gradient, and diffusion coefficient to synthesize homogeneous octacalcium phosphate/hydrogel composites with respect to the crystal morphology and density. The ion flux and local pH play an important role in determining the morphology, density, and phase of the crystals. This study suggests a model system that can reveal the relation between local conditions and the resulting crystal phase in diffusion-limited systems and provides a synthetic method for homogeneously organized organic/inorganic composites.

An Insight into Nano Silver Fluoride-Coated Silk Fibroin Bioinspired Membrane Properties for Guided Tissue Regeneration

The current work focuses on the development of a novel electrospun silk fibroin (SF) nonwoven mat as a GTR membrane with antibacterial, biomineralization and biocompatible properties. The γ-poly glutamic acid (γ-PGA)-capped nano silver fluoride (NSF) and silver diamine fluoride (SDF) were first synthesized, which were dip-coated onto electrospun silk fibroin mats (NSF-SF and SDF-SF). UV-Vis spectroscopy and TEM depicted the formation of silver nanoparticles. NSF-SF and SDF-SF demonstrated antibacterial properties (against Porphyromonas gingivalis) with 3.1 and 6.7 folds higher relative to SF, respectively. Post-mineralization in simulated body fluid, the NSF-SF effectively promoted apatite precipitation (Ca/P ~1.67), while the SDF-SF depicted deposition of silver nanoparticles, assessed by SEM-EDS. According to the FTIR-ATR deconvolution analysis, NSF-SF portrayed ~75% estimated hydroxyapatite crystallinity index (CI), whereas pure SF and SDF-SF demonstrated ~60%. The biocompatibility of NSF-SF was ~82% when compared to the control, while SDF-coated samples revealed in vitro cytotoxicity, further needing in vivo studies for a definite conclusion. Furthermore, the NSF-SF revealed the highest tensile strength of 0.32 N/mm and 1.76% elongation at break. Therefore, it is substantiated that the novel bioactive and antibacterial NSF-SF membranes can serve as a potential candidate, shedding light on further in-depth analysis for GTR applications.

Engineering a Self-Assembling Leucine Zipper Hydrogel System with Function-Specific Motifs for Tissue Regeneration

Protein-based self-assembling hydrogels can exhibit remarkably tunable properties as a scaffold for regenerative medicine applications. In this study, we sought to develop a leucine zipper (LZ) based self-assembling hydrogel with function-specific motifs for tissue-specific regeneration. As a proof-of-concept approach, we incorporated (a) calcium-binding domains ESQES and QESQSEQS derived from dentin matrix protein 1 (DMP1) and (b) an heparin-binding domain adjacent preceded by an MMP2 (matrix metalloprotease 2) cleavage site to facilitate loading of heparin binding growth factors, such as BMP-2, VEGF, and TGF-β1, and their release in vivo by endogenous MMP2 proteolytic cleavage. These scaffolds were characterized and evaluated in vitro and in vivo. In vivo studies highlighted the potential of the engineered LZ hydrogel with respect to osteogenic differentiation of stem cells. The premineralized LZ scaffold loaded with HMSCs showed an enhanced osteoinductive property when compared with the control nonmineralized scaffold. The LZ backbone with heparin-binding domain containing an MMP2 cleavage site facilitated tethering of heparin-binding growth factors, such as VEGF, TGF-β1 and BMP2 and demonstrated controlled release of these active growth factor both in vitro and in vivo and demonstrated growth factor specific activity in vivo (BMP-2 and TGF-β1). Overall, we present a versatile protein based self-assembling system with tunable properties for tissue regeneration.

Recent advances in the application of mesoporous silica-based nanomaterials for bone tissue engineering

Silica nanomaterials (SNMs) and their composites have recently been investigated as scaffolds for bone tissue engineering. SNM scaffolds possess the ability to encourage bone cell growth and also allow the simultaneous delivery of biologically active biomolecules that are encapsulated in the mesopores. Their high mechanical strength, low cytotoxicity, ability to stimulate both the proliferation and osteogenic differentiation of progenitor cells make the SNMs appropriate scaffolds. Their physiochemical properties facilitate the cell spreading process, allow easy access to nutrients and help the cell-cell communication process during bone tissue engineering. The ability to deliver small biomolecules, such as dexamethasone, different growth factors, vitamins and mineral ions depends on the morphology, porosity, and crystallinity of SNMs and their composites with other polymeric materials. In this review, the abilities of SNMs to perform as suitable scaffolds for bone tissue engineering are comprehensively discussed.

A comparative study on agarose acetate and PDLLA scaffold for rabbit femur defect regeneration

The development of degradable polymer scaffolds is a key issue in bone regeneration. Poly(D, L-lactide) (PDLLA) and its derivatives have usually been applied to the construction of degradable scaffolds, but these scaffolds had problems with acidic degradation products and quick loss of mechanic strength during the later degradation, which usually led to scaffold collapse and cavity formation because of the slower rate of bone regeneration. In the present paper, a polysaccharide derivative, agarose acetate (AGA), was synthesized and a novel porous AGA scaffold was successfully developed through a salt-leaching process. The AGA scaffold had over 90% porosity without swelling in water, and compared to collapse and acidic products of PDLLA scaffold during degradation, the AGA scaffold maintained a stable morphology and a nearly neutral pH value over 18 months' degradation in PBS. A bone mesenchymal stem cells (BMSCs) adhesion and proliferation experiment showed that more cells adhered to the AGA scaffold than to the PDLLA scaffold. A subcutaneous implant test showed that the AGA scaffold slowly degraded and did not cause an inflammatory response surrounding the implantation lesion site. AGA scaffold was implanted into femur defects in New Zealand white rabbits to test its in vivo performance. Results indicated that the AGA scaffold accelerated the process of bone regeneration compared to the PDLLA group and, with time, new bone was formed from the margin toward the center of the scaffolds, and the scaffold left in place retained its porous structure without collapsing. Meanwhile, the AGA scaffold showed a low degradation rate and kept its shape during the in vivo degradation compared to the PDLLA scaffold. This performance could have the benefit of integrated regenerative bone being formed instead of cavities due to the quickly degraded scaffold disappearing. These results demonstrate that the AGA scaffold has significant potential in bone regeneration applications.

Development of osteopromotive poly (octamethylene citrate glycerophosphate) for enhanced bone regeneration

The design and development of bioactive materials that are inherently conducive for osteointegration and bone regeneration with tunable mechanical properties and degradation remains a challenge. Herein, we report the development of a new class of citrate-based materials with glycerophosphate salts, β-glycerophosphate disodium (β-GP-Na) and glycerophosphate calcium (GP-Ca), incorporated through a simple and convenient one-pot condensation reaction, which might address the above challenge in the search of suitable orthopedic biomaterials. Tensile strength of the resultant poly (octamethylene citrate glycerophosphate), POC-βGP-Na and POC-GP-Ca, was as high as 28.2 ± 2.44  MPa and 22.76 ± 1.06  MPa, respectively. The initial modulus ranged from 5.28 ± 0.56  MPa to 256.44 ± 22.88  MPa. The mechanical properties and degradation rate of POC-GP could be controlled by varying the type of salts, and the feeding ratio of salts introduced. Particularly, POC-GP-Ca demonstrated better cytocompatibility and the corresponding composite POC-GP-Ca/hydroxyapatite (HA) also elicited improved osteogenic differentiation of human mesenchymal stem cells (hMSCs) in vitro, as compared to POC-βGP-Na/HA and POC/HA. The superior in-vivo performance of POC-GP-Ca/HA microparticle scaffolds in promoting bone regeneration over POC-βGP-Na/HA and POC/HA was further confirmed in a rabbit femoral condyle defect model. Taken together, the tunability of mechanical properties and degradation rates, together with the osteopromotive nature of POC-GP polymers make these materials, especially POC-GP-Ca well suited for bone tissue engineering applications. STATEMENT OF SIGNIFICANCE: The design and development of bioactive materials that are inherently conducive for osteointegration and bone regeneration with tunable mechanical properties and degradation remains a challenge. Herein, we report the development of a new class of citrate-based materials with glycerophosphate salts, β-glycerophosphate disodium (β-GPNa) and glycerophosphate calcium (GPCa), incorporated through a simple and convenient one-pot condensation reaction. The resultant POC-GP polymers showed significantly improved mechanical property and tunable degradation rate. Within the formulation investigated, POC-GPCa/HA composite further demonstrated better bioactivity in favoring osteogenic differentiation of hMSCs in vitro and promoted bone regeneration in rabbit femoral condyle defects. The development of POC-GP expands the repertoire of the well-recognized citrate-based biomaterials to meet the ever-increasing needs for functional biomaterials in tissue engineering and other biomedical applications.

Silk fibroin-derived polypeptides additives to promote hydroxyapatite nucleation in dense collagen hydrogels

Silk fibroin-derived polypeptides (FDPs) are polypeptides resulting from the enzymatic separation of the hydrophobic crystalline (Cp) and hydrophilic electronegative amorphous (Cs) components of silk fibroin (SF). The role of these polypeptides in promoting the nucleation of hydroxyapatite (HA) has been previously investigated, yet is still not fully understood. Here we study the potential of HA mineralization via FDPs incorporated at 1:10, 1:2 and 1:1 in a plastically compressed (PC) and dense collagen (DC) scaffold. Scaffolds were immersed in simulated body fluid (SBF) at physiological conditions (pH = 7.4, 37°C) to promote biomineralization. The effect of Cs and Cp to promote HA nucleation was investigated at different time points, and compared to pure DC scaffolds. Characterization of Cs and Cp fragments using Liquid Chromatography-Mass Spectrometry (LCMS) showed little difference in the amino acid composition of the FDPs. Results obtained in vitro using Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM) X-Ray Diffraction (XRD) and mass analysis showed little difference between scaffolds that incorporated Cs, Cp, and DC hydrogels. These results demonstrated that silk FDPs incorporation are not yet suitable to promote HA nucleation in vivo without further refining the collagen-FDP system.

Developing a Strontium-Releasing Graphene Oxide-/Collagen-Based Organic-Inorganic Nanobiocomposite for Large Bone Defect Regeneration via MAPK Signaling Pathway

Significant efforts have been dedicated to fabricating favorable biomaterial-based bone substitutes for the repair of large bone defects. However, the development of bone biomaterials with suitable physiochemical and osteoinductive properties remains a challenge. Here, novel strontium-graphene oxide (Sr-GO) nanocomposites that allow long-term release of Sr ions are fabricated, which are used to reinforce collagen (Col) scaffolds through covalent cross-linking. The prepared Sr-GO-Col scaffold demonstrates significantly high water retention rates and excellent mechanical properties compared with unmodified Col scaffolds. The Sr-GO-modified Col scaffolds display a strong effect on adipose-derived stem cells by facilitating cell adhesion and osteogenic differentiation and by promoting the secretion of angiogenic factors to stimulate the in vitro tube formation of endothelial cells. Additionally, the secretion of angiogenic VEGF and osteogenic BMP-2 proteins is increased, which may be attributed to the synergistic effects of GO and Sr on the activation of the MAPK signaling pathway. The Sr-GO-Col constructs were then transplanted into rat critical-size calvarial bone defects, which showed the best bone regeneration and angiogenesis outcome at 12 weeks. Moreover, histological staining results show that the Sr-GO-Col group achieved complete defect bridging with the newly formed bone tissue and the residual Sr-GO nanoparticles are phagocytosed and degraded by multinucleated giant cells. These findings reveal that the incorporation of inorganic Sr-GO nanocomposites into biocompatible Col scaffolds is a viable strategy for fabricating favorable substitutes that enhance the regeneration of large bone defects.

Tissue engineered bone mimetics to study bone disorders ex vivo: Role of bioinspired materials

Recent advances in materials development and tissue engineering has resulted in a substantial number of bioinspired materials that recapitulate cardinal features of bone extracellular matrix (ECM) such as dynamic inorganic and organic environment(s), hierarchical organization, and topographical features. Bone mimicking materials, as defined by its self-explanatory term, are developed based on the current understandings of the natural bone ECM during development, remodeling, and fracture repair. Compared to conventional plastic cultures, biomaterials that resemble some aspects of the native environment could elicit a more natural molecular and cellular response relevant to the bone tissue. Although current bioinspired materials are mainly developed to assist tissue repair or engineer bone tissues, such materials could nevertheless be applied to model various skeletal diseases in vitro. This review summarizes the use of bioinspired materials for bone tissue engineering, and their potential to model diseases of bone development and remodeling ex vivo. We largely focus on biomaterials, designed to re-create different aspects of the chemical and physical cues of native bone ECM. Employing these bone-inspired materials and tissue engineered bone surrogates to study bone diseases has tremendous potential and will provide a closer portrayal of disease progression and maintenance, both at the cellular and tissue level. We also briefly touch upon the application of patient-derived stem cells and introduce emerging technologies such as organ-on-chip in disease modeling. Faithful recapitulation of disease pathologies will not only offer novel insights into diseases, but also lead to enabling technologies for drug discovery and new approaches for cell-based therapies.

Tuning the c-Axis Orientation of Calcium Phosphate Hybrid Thin Films Using Polymer Templates

The orientation of the c-axis in octacalcium phosphate (OCP) nanocrystals that were incorporated into hybrid thin films was successfully tuned using poly(vinyl alcohol) (PVA) thin-film templates of varying thicknesses. This approach was inspired by biomineralization. Thicker PVA templates enhanced the c-axis orientation of the OCP crystals perpendicular to the substrate. Using this approach with a 900 nm thick PVA template, OCP/PVA hybrid thin films (1.8 μm thick) with a c-axis orientation perpendicular to the substrate were formed. Hydroxyapatite (HAP) hybrid thin films that also exhibited a perpendicular c-axis orientation were obtained through the topotactic transformation of the OCP/PVA hybrid thin films in aqueous solution. The thickness change of the polymer templates had a significant effect on the structure of the OCP nanocrystals in the hybrid thin films. The structural control of the OCP hybrid thin films that were formed through the biomineralization-inspired approach allowed the formation of HAP hybrid thin films with controlled structures.

Peptide Self-Assembly into Hydrogels for Biomedical Applications Related to Hydroxyapatite

Amphiphilic peptides can be self-assembled by establishing physical cross-links involving hydrogen bonds and electrostatic interactions with divalent ions. The derived hydrogels have promising properties due to their biocompatibility, reversibility, trigger capability, and tunability. Peptide hydrogels can mimic the extracellular matrix and favor the growth of hydroxyapatite (HAp) as well as its encapsulation. Newly designed materials offer great perspectives for applications in the regeneration of hard tissues such as bones, teeth, and cartilage. Furthermore, development of drug delivery systems based on HAp and peptide self-assembly is attracting attention.

Hierarchical Biomineralization: from Nature's Designs to Synthetic Materials for Regenerative Medicine and Dentistry

Biomineralization is a highly dynamic, yet controlled, process that many living creatures employ to develop functional tissues such as tooth enamel, bone, and others. A major goal in materials science is to create bioinspired functional structures based on the precise organization of building blocks across multiple length scales. Therefore, learning how nature has evolved to use biomineralization could inspire new ways to design and develop synthetic hierarchical materials with enhanced functionality. Toward this goal, this review dissects the current understanding of structure-function relationships of dental enamel and bone using a materials science perspective and discusses a wide range of synthetic technologies that aim to recreate their hierarchical organization and functionality. Insights into how these strategies could be applied for regenerative medicine and dentistry are also provided.

Toward Growing Robots: A Historical Evolution from Cellular to Plant-Inspired Robotics

This paper provides the very first definition of "growing robots": a category of robots that imitates biological growth by the incremental addition of material. Although this nomenclature is quite new, the concept of morphological evolution, which is behind growth, has been extensively addressed in engineering and robotics. In fact, the idea of reproducing processes that belong to living systems has always attracted scientists and engineers. The creation of systems that adapt reliably and effectively to the environment with their morphology and control would be beneficial for many different applications, including terrestrial and space exploration or the monitoring of disasters or dangerous environments. Different approaches have been proposed over the years for solving the morphological adaptation of artificial systems, e.g., self-assembly, self-reconfigurability, evolution of virtual creatures, plant inspiration. This work reviews the main milestones in relation to growing robots, starting from the original concept of a self-replicating automaton to the achievements obtained by plant inspiration, which provided an alternative solution to the challenges of creating robots with self-building capabilities. A selection of robots representative of growth functioning is also discussed, grouped by the natural element used as model: molecule, cell, or organism growth-inspired robots. Finally, the historical evolution of growing robots is outlined together with a discussion of the future challenges toward solutions that more faithfully can represent biological growth.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Periodic Surface-Ring Pattern Formation for Hydroxyapatite Thin Films Formed by Biomineralization-Inspired Processes

Surface morphology is a key factor that might significantly influence the properties of biomaterials. In this study, periodic surface-ring structures have been constructed for calcium phosphate thin films via biomineralization-inspired crystallization process. The patterned octacalcium phosphate crystals have been obtained on poly(2-hydroxyethyl methacrylate) (PHEMA) matrix in the presence of poly(acrylic acid) (PAA). The patterned surface morphologies of the crystal thin films could be tuned by the amount of PAA additives. In addition, the rapid and topotactic transformation to hydroxyapatite (HAP) thin films with surface-ring structures has also been achieved. This study may provide new strategy toward the design of functional calcium phosphate-based thin-film hybrids.

Structure and properties of various hybrids fabricated by silk nanofibrils and nanohydroxyapatite

To harvest silk fibroin (SF) based organic/inorganic composites with various general properties (e.g. hard or soft), the strategies of vacuum filtration and centrifugation were employed in this work to produce a film and hydrogel of SF-nanofibril/nanohydroxyapatite, respectively. It was found that the SF-nanofibril mediated the mineralization of hydroxyapatites (HAP) in situ and the morphology of such organic/inorganic nanohybrids presented a "flower-like" structure, mainly because of the strong interaction between SF-nanofibrils and nanohydroxyapatites. On the other hand, the extracellular matrix (ECM) like SF/HAP hydrogel illustrated not only an adequate mechanical strength, but also a remarkable thixotropy, with the storage modulus (G') being able to recover to 85% within 50 seconds when a large shearing strain (5000%) was applied. Moreover, the mechanical properties of these well-organized materials were adjustable for varied demands, and the whole fabrication process was simple and eco-friendly. Therefore, all results indicate that hybrids of SF-nanofibril/nanohydroxyapatite have promise in applications, particularly in bone tissue engineering.

Chitosan nanocomposites based on distinct inorganic fillers for biomedical applications

Chitosan (CHI), a biocompatible and biodegradable polysaccharide with the ability to provide a non-protein matrix for tissue growth, is considered to be an ideal material in the biomedical field. However, the lack of good mechanical properties limits its applications. In order to overcome this drawback, CHI has been combined with different polymers and fillers, leading to a variety of chitosan-based nanocomposites. The extensive research on CHI nanocomposites as well as their main biomedical applications are reviewed in this paper. An overview of the different fillers and assembly techniques available to produce CHI nanocomposites is presented. Finally, the properties of such nanocomposites are discussed with particular focus on bone regeneration, drug delivery, wound healing and biosensing applications.

The role of amino acids in hydroxyapatite mineralization

Polar and charged amino acids (AAs) are heavily expressed in non-collagenous proteins (NCPs), and are involved in hydroxyapatite (HA) mineralization in bone. Here, we review what is known on the effect of single AAs on HA precipitation. Negatively charged AAs, such as aspartic acid, glutamic acid (Glu) and phosphoserine are largely expressed in NCPs and play a critical role in controlling HA nucleation and growth. Positively charged ones such as arginine (Arg) or lysine (Lys) are heavily involved in HA nucleation within extracellular matrix proteins such as collagen. Glu, Arg and Lys intake can also increase bone mineral density by stimulating growth hormone production. In vitro studies suggest that the role of AAs in controlling HA precipitation is affected by their mobility. While dissolved AAs are able to inhibit HA precipitation and growth by chelating Ca2+ and PO43- ions or binding to nuclei of calcium phosphate and preventing their further growth, AAs bound to surfaces can promote HA precipitation by attracting Ca2+ and PO43- ions and increasing the local supersaturation. Overall, the effect of AAs on HA precipitation is worth being investigated more, especially under conditions closer to the physiological ones, where the presence of other factors such as collagen, mineralization inhibitors, and cells heavily influences HA precipitation. A deeper understanding of the role of AAs in HA mineralization will increase our fundamental knowledge related to bone formation, and could lead to new therapies to improve bone regeneration in damaged tissues or cure pathological diseases caused by excessive mineralization in tissues such as cartilage, blood vessels and cardiac valves.

Soft Surfaces for the Reversible Control of Thin-Film Microstructure and Optical Reflectance

A micromechano-optical material is rapidly and reversibly switched between distinct states of reflectance by simply stretching and relaxing the hybrid structure. The material is fabricated and controlled by leveraging the ability of soft elastic substrates to regulate the growth and morphological evolution of a chemically deposited polycrystalline thin film.

Zinc-modified nanopolymers improve the quality of resin-dentin bonded interfaces

INTRODUCTION

Demineralized collagen fibers at the hybrid layer are susceptible to degradation. Remineralization may aid to improve bond longevity.

OBJECTIVES

The aim of the present study was to infiltrate zinc and calcium-loaded polymeric nanoparticles into demineralized dentin to facilitate hybrid layer remineralization.

MATERIALS AND METHODS

Zinc or calcium-loaded polymeric nanoparticles were infiltrated into etched dentin, and Single Bond Adhesive was applied. Bond strength was tested after 24 h and 6 months storage. Nanomechanical properties, dye-assisted confocal laser microscopy, and Masson's trichrome staining evaluation were performed to assess for the hybrid layer morphology, permeability, and remineralization ability after 24 h and 3 months. Data were analyzed by ANOVA and Student-Newman-Keuls multiple comparisons tests (p < 0.05).

RESULTS

Immediate bond strength was not affected by nanoparticles infiltration (25 to 30 MPa), while after 6 months, bond strengths were maintained (22 to 24 MPa). After 3 months, permeability occurred only in specimens in which nanoparticles were not infiltrated. Dentin remineralization, at the bottom of the hybrid layer, was observed in all groups. After microscopy analysis, zinc-loaded nanoparticles were shown to facilitate calcium deposition throughout the entire hybrid layer. Young's modulus at the hybrid layer increased from 2.09 to 3.25 GPa after 3 months, in specimens with zinc nanoparticles; meanwhile, these values were reduced from 1.66 to 0.49 GPa, in the control group.

CONCLUSION

Infiltration of polymeric nanoparticles into demineralized dentin increased long-term bond strengths. Zinc-loaded nanoparticles facilitate dentin remineralization within the complete resin-dentin interface.

CLINICAL RELEVANCE

Resin-dentin bond longevity and dentin remineralization at the hybrid layer were facilitated by zinc-loaded nanoparticles.

Hydroxyapatite formation on graphene oxide modified with amino acids: arginine versus glutamic acid

Hydroxyapatite (HA, Ca5(PO4)3OH) is the main inorganic component of hard tissues, such as bone and dentine. HA nucleation involves a set of negatively charged phosphorylated proteins known as non-collagenous proteins (NCPs). These proteins attract Ca(2+) and PO4(3-) ions and increase the local supersaturation to a level required for HA precipitation. Polar and charged amino acids (AAs) are highly expressed in NCPs, and seem to be responsible for the mineralizing effect of NCPs; however, the individual effect of these AAs on HA mineralization is still unclear. In this work, we investigate the effect of a negatively charged (Glu) and positively charged (Arg) AA bound to carboxylated graphene oxide (CGO) on HA mineralization in simulated body fluids (SBF). Our results show that Arg induces HA precipitation faster and in larger amounts than Glu. We attribute this to the higher stability of the complexes formed between Arg and Ca(2+) and PO4(3-) ions, and also to the fact that Arg exposes both carboxyl and amino groups on the surface. These can electrostatically attract both Ca(2+) and PO4(3-) ions, thus increasing local supersaturation more than Glu, which exposes carboxyl groups only.

A Dual Role of Graphene Oxide Sheet Deposition on Titanate Nanowire Scaffolds for Osteo-implantation: Mechanical Hardener and Surface Activity Regulator

Scaffold biomaterials with open pores and channels are favourable for cell growth and tissue regeneration, however the inherent poor mechanical strength and low surface activity limit their applications as load-bearing bone grafts with satisfactory osseointegration. In this study, macro-porous graphene oxide (GO) modified titanate nanowire scaffolds with desirable surface chemistry and tunable mechanical properties were prepared through a simple hydrothermal process followed by electrochemical deposition of GO nanosheets. The interconnected and porous structure of the GO/titanate nanowire scaffolds provides a large surface area for cellular attachment and migration and displays a high compressive strength of approximately 81.1 MPa and a tunable Young’s modulus over the range of 12.4–41.0 GPa, which satisfies site-specific requirements for implantation. Surface chemistry of the scaffolds was modulated by the introduction of GO, which endows the scaffolds flexibility in attaching and patterning bioactive groups (such as -OH, -COOH and -NH₂). In vitro cell culture tests suggest that the GO/titanate nanowire scaffolds act as a promising biomaterial candidate, in particular the one terminated with -OH groups, which demonstrates improved cell viability, and proliferation, differentiation and osteogenic activities.

Amifostine-conjugated pH-sensitive calcium phosphate-covered magnetic-amphiphilic gelatin nanoparticles for controlled intracellular dual drug release for dual-targeting in HER-2-overexpressing breast cancer

We developed a surfactant-free method utilizing amifostine to stably link a targeting ligand (Herceptin) to amphiphilic gelatin (AG)-iron oxide@calcium phosphate (CaP) nanoparticles with hydrophobic curcumin (CUR) and hydrophilic doxorubicin (DOX) encapsulated in the AG core and CaP shell (AGIO@CaP-CD), respectively. This multi-functional nanoparticle system has a pH-sensitive CaP shell and degradable amphiphilic gelatin (AG) core, which enables controllable sequential release of the two drugs. The dual-targeting system of AGIO@CaP-CD (HER-AGIO@CaP-CD) with a bioligand and magnetic targeting resulted in significantly elevated cellular uptake in HER2-overexpressing SKBr3 cells and more efficacious therapy than delivery of targeting ligand alone due to the synergistic cell multi-drug resistance/apoptosis-inducing effect of the CUR and DOX combination. This nanoparticle combined with Herceptin and iron oxide nanoparticles not only provided a dual-targeting functionality, but also encapsulated CUR and DOX as a dual-drug delivery system for the combination therapy. This study further demonstrated that the therapeutic efficacy of this dual-targeting co-delivery system can be improved by modifying the application duration of magnetic targeting, which makes this combination therapy system a powerful new tool for in vitro/in vivo cancer therapy, especially for HER2-positive cancers.

Nanotechnology in dentistry: prevention, diagnosis, and therapy

Nanotechnology has rapidly expanded into all areas of science; it offers significant alternative ways to solve scientific and medical questions and problems. In dentistry, nanotechnology has been exploited in the development of restorative materials with some significant success. This review discusses nanointerfaces that could compromise the longevity of dental restorations, and how nanotechnolgy has been employed to modify them for providing long-term successful restorations. It also focuses on some challenging areas in dentistry, eg, oral biofilm and cancers, and how nanotechnology overcomes these challenges. The recent advances in nanodentistry and innovations in oral health-related diagnostic, preventive, and therapeutic methods required to maintain and obtain perfect oral health, have been discussed. The recent advances in nanotechnology could hold promise in bringing a paradigm shift in dental field. Although there are numerous complex therapies being developed to treat many diseases, their clinical use requires careful consideration of the expense of synthesis and implementation.

Experimental and numerical measurements of adhesion energies between PHEMA and PGLYMA with hydroxyapatite crystal

Synthetic orthopaedic materials consisting of a single bioinert polymeric material do not meet the complex biological and physical requirements of scaffold-guided bone tissue repair and regeneration. Of particular interest is the design of biocompatible hydrogel-hydroxyapatite composite bone substitutes with outstanding interfacial adhesion that would warranty the ability for the composite to withstand functional loadings without exhibiting brittle fractures during the dynamic guided tissue regeneration. For this purpose, the hydroxylated side chain of chemically cross-linked poly (2-hydroxyethyl methacrylate) (pHEMA) is substitute with a carboxylated side chain to make poly (glycerol methacrylate) (pGLYMA). Here, we carry out atomistic simulations and atomic force microscopy to predict and experimentally determine the interfacial adhesion energies of pHEMA and pGLYMA with the surface of single-crystalline hydroxyapatite (HA) whiskers. Both experimental and numerical results showed that pGLYMA has stronger adhesion forces with HA and may be used for preparing a high-affinity polymer-HA composite. The high adhesive interactions between pGLYMA and HA were found to be due to strong electrostatic energies.

Biomimetic approaches in bone tissue engineering: Integrating biological and physicomechanical strategies

The development of responsive biomaterials capable of demonstrating modulated function in response to dynamic physiological and mechanical changes in vivo remains an important challenge in bone tissue engineering. To achieve long-term repair and good clinical outcomes, biologically responsive approaches that focus on repair and reconstitution of tissue structure and function through drug release, receptor recognition, environmental responsiveness and tuned biodegradability are required. Traditional orthopedic materials lack biomimicry, and mismatches in tissue morphology, or chemical and mechanical properties ultimately accelerate device failure. Multiple stimuli have been proposed as principal contributors or mediators of cell activity and bone tissue formation, including physical (substrate topography, stiffness, shear stress and electrical forces) and biochemical factors (growth factors, genes or proteins). However, optimal solutions to bone regeneration remain elusive. This review will focus on biological and physicomechanical considerations currently being explored in bone tissue engineering.

Osteoblast compatibility of minerals substituted hydroxyapatite reinforced poly(sorbitol sebacate adipate) nanocomposites for bone tissue application

The main focus of this investigation is to explore novel minerals (M) substituted hydroxyapatite (M-HAP) as reinforcing agents to strengthen poly(sorbitol sebacate adipate) (PSSA), a biodegradable polymer for soft and hard tissue applications.

Poly(γ-glutamic acid) induced homogeneous mineralization of the poly(ethylene glycol)-co-2-hydroxyethyl methacrylate cryogel for potential application in bone tissue engineering

Homogeneous mineralization of a polymeric cryogel could be induced by poly(γ-glutamic acid) and benefit the cell response of the cryogel.

Bioinspired structural materials

Natural structural materials are built at ambient temperature from a fairly limited selection of components. They usually comprise hard and soft phases arranged in complex hierarchical architectures, with characteristic dimensions spanning from the nanoscale to the macroscale. The resulting materials are lightweight and often display unique combinations of strength and toughness, but have proven difficult to mimic synthetically. Here, we review the common design motifs of a range of natural structural materials, and discuss the difficulties associated with the design and fabrication of synthetic structures that mimic the structural and mechanical characteristics of their natural counterparts.

A comparative study of zwitterionic ligands-mediated mineralization and the potential of mineralized zwitterionic matrices for bone tissue engineering

Cationic and anionic residues of the extracellular matrices (ECM) of bone play synergistic roles in recruiting precursor ions and templating the nucleation, growth and crystalline transformations of calcium apatite in natural biomineralization. We previously reported that zwitterionic sulfobetaine ligands can template extensive 3-dimensional (3-D) hydroxyapaptite (HA)-mineralization of photo-crosslinked polymethacrylatehydrogels. Here, we compared the potency of two other major zwitterionic ligands, phosphobetaine and carboxybetaine, with that of the sulfobetaine in mediating 3-D mineralization using the crosslinked polymethacrylate hydrogel platform. We confirmed that all three zwitterionic hydrogels were able to effectively template 3-D mineralization, supporting the general ability of zwitterions to mediate templated mineralization. Among them, however, sulfobetaine and phosphobetaine hydrogels templated denser 3-D mineralizationthan the carboxybetaine hydrogel, likely due to their higher free water fractions and better maintenance of zwitterionic nature throughout the pH-changes during the in vitro mineralization process. We further demonstrated that the extensively mineralized zwitterionic hydrogels could be exploited for efficient retention (e.g. 99% retention after 24-h incubation in PBS) of osteogenic growth factor recombinant bone morphogenetic protein-2 (rhBMP-2) and subsequent sustained local release with retained bioactivity. Combined with the excellent cytocompatibility of all three zwitterionic hydrogels and the significantly improved cell adhesive properties of their mineralized matrices, these materials could find promising applications in bone tissue engineering.

Fabrication of polyHEMA grids by micromolding in capillaries for cell patterning and single-cell arrays

Control of cell adhesion and growth by microfabrication technology and surface chemistry is important in an increasing number of applications in biotechnology and medicine. In this study, we developed a method to fabricate (2-hydroxyethyl methacrylate) (polyHEMA) grids on glass by micromolding in capillaries (MIMIC). As a non-fouling biomaterial, polyHEMA was used to inhibit the nonspecific bonding of cells, whereas the glass surface provided a cell adhesive background. The polyHEMA chemical barrier was directly obtained using MIMIC without surface modification, and the microchannel networks used for capillarity were easily achieved by reversibly bonding the polydimethylsiloxane (PDMS)mold and the glass. After fabrication of the polyHEMA micropattern, individual cytophilic microwells surrounded by cytophobic sidewalls were presented on the glass surface. The polyHEMA micropattern proved effective in controlling the shape and spreading of cells, and square-shaped mouse osteoblast MC3T3-E1 cells were obtained in microwell arrays after incubation for 3 days. Moreover, the widths of the microwells in this micropattern were optimized for use as single-cell arrays. The proposed method could be a convenient tool in the field of drug screening, stem cell research, and tissue engineering.

Effect of addition of hyaluronic acids on the osteoconductivity and biodegradability of synthetic octacalcium phosphate

The present study was designed to investigate whether three sodium hyaluronic acid (HyA) medical products, Artz(®), Suvenyl(®) and a chemically modified derivative of sodium HyA Synvisc(®), can be used as suitable vehicles for an osteoconductive octacalcium phosphate (OCP). OCP granules (300-500 μm diameter) were mixed with these sodium HyAs with molecular weights of 90 × 10(4) (Artz(®)), 190 × 10(4) (Suvenyl(®)) and 600 × 10(4) (Synvisc(®)) (referred to as HyA90, HyA190 and HyA600, respectively). OCP-HyA composites were injected using a syringe into a polytetrafluoroethylene ring, placed on the subperiosteal region of mouse calvaria for 3 and 6 weeks, and then bone formation was assessed by histomorphometry. The capacity of the HyAs for osteoclast formation from RAW264 cells with RANKL was examined by TRAP staining in vitro. Bone formation was enhanced by the OCP composites with HyA90 and HyA600, compared to OCP alone, through enhanced osteoclastic resorption of OCP. HyA90 and HyA600 facilitated in vitro osteoclast formation. The results suggest that the osteoconductive property of OCP was accelerated by the HyAs-associated osteoclastic resorption of OCP, and therefore that HyA/OCP composites are attractive bone substitutes which are injectable and bioactive materials.

Super-adhesive polymer-silica nanocomposite layers

Atomized spray plasma deposition (ASPD) using a precursor mixture of 2-hydroxyethyl methacrylate and methacryloyl-functionalized 15 nm silica nanoparticles leads to the formation of poly(2-hydroxyethyl methacrylate)-silica nanocomposite layers. The direct application of these coatings to overlapping glass-glass joints gives rise to excellent in situ adhesion reaching 84 MPa shear bond strength and 6 GPa shear modulus prior to the onset of adherent (bulk glass) failure. This significant enhancement in interfacial adhesion arises due to the silica nanoparticle surface methacryloyl groups enhancing cross-linking throughout the nanocomposite layer.

Interactions between inorganic and organic phases in bone tissue as a source of inspiration for design of novel nanocomposites

Mimicking the nanostructure of bone and understanding the interactions between the nanoscale inorganic and organic components of the extracellular bone matrix are crucial for the design of biomaterials with structural properties and a functionality similar to the natural bone tissue. Generally, these interactions involve anionic and/or cationic functional groups as present in the organic matrix, which exhibit a strong affinity for either calcium or phosphate ions from the mineral phase of bone. This study reviews the interactions between the mineral and organic extracellular matrix components in bone tissue as a source of inspiration for the design of novel nanocomposites. After providing a brief description of the various structural levels of bone and its main constituents, a concise overview is presented on the process of bone mineralization as well as the interactions between calcium phosphate (CaP) nanocrystals and the organic matrix of bone tissue. Bioinspired synthetic approaches for obtaining nanocomposites are subsequently addressed, with specific focus on chemical groups that have affinity for CaPs or are involved in stimulating and controlling mineral formation, that is, anionic functional groups, including carboxyl, phosphate, sulfate, hydroxyl, and catechol groups.