Rapid Purification and Size Separation of Gold Nanoparticles via Diafiltration

Diversity of fungus-mediated synthesis of gold nanoparticles: properties, mechanisms, challenges, and solving methods

Fungi-mediated synthesis of Gold nanoparticles (AuNPs) has advantages in: high efficiency, low energy consumption, no need for extra capping and stabilizing agents, simple operation, and easy isolation and purification. Many fungi have been found to synthesize AuNPs inside cells or outside cells, providing different composition and properties of particles when different fungi species or reaction conditions are used. This is good to produce AuNPs with different properties, but may cause challenges to precisely control the particle shape, size, and activities. Besides, low concentrations of substrate and fungal biomass are needed to synthesize small-size particles, limiting the yield of AuNPs in a large scale. To find clues for the development methods to solve these challenges, the reported mechanisms of the fungi-mediated synthesis of AuNPs were summarized. The mechanisms of intracellular AuNPs synthesis are dependent on gold ions absorption by the fungal cell wall via proteins, polysaccharides, or electric absorption, and the reduction of gold ions via enzymes, proteins, and other cytoplasmic redox mediators in the cytoplasm or cell wall. The extracellular synthesis of AuNPs is mainly due to the metabolites outside fungal cells, including proteins, peptides, enzymes, and phenolic metabolites. These mechanisms cause the great diversity of the produced AuNPs in functional groups, element composition, shapes, sizes, and properties. Many methods have been developed to improve the synthesis efficiency by changing: chloroauric acid concentrations, reaction temperature, pH, fungal mass, and reaction time. However, future studies are still required to precisely control the: shape, size, composition, and properties of fungal AuNPs.

Tailor-Made Gold Nanomaterials for Applications in Soft Bioelectronics and Optoelectronics

In modern nanoscience and nanotechnology, gold nanomaterials are indispensable building blocks that have demonstrated a plethora of applications in catalysis, biology, bioelectronics, and optoelectronics. Gold nanomaterials possess many appealing material properties, such as facile control over their size/shape and surface functionality, intrinsic chemical inertness yet with high biocompatibility, adjustable localized surface plasmon resonances, tunable conductivity, wide electrochemical window, etc. Such material attributes have been recently utilized for designing and fabricating soft bioelectronics and optoelectronics. This motivates to give a comprehensive overview of this burgeoning field. The discussion of representative tailor-made gold nanomaterials, including gold nanocrystals, ultrathin gold nanowires, vertically aligned gold nanowires, hard template-assisted gold nanowires/gold nanotubes, bimetallic/trimetallic gold nanowires, gold nanomeshes, and gold nanosheets, is begun. This is followed by the description of various fabrication methodologies for state-of-the-art applications such as strain sensors, pressure sensors, electrochemical sensors, electrophysiological devices, energy-storage devices, energy-harvesting devices, optoelectronics, and others. Finally, the remaining challenges and opportunities are discussed.

Affinity Constants of Bovine Serum Albumin for 5 nm Gold Nanoparticles (AuNPs) with ω-Functionalized Thiol Monolayers Determined by Fluorescence Spectroscopy

A detailed understanding of the binding of serum proteins to small (dcore <10 nm) nanoparticles (NPs) is essential for the mediation of protein corona formation in next generation nanotherapeutics. While a number of studies have investigated the details of protein adsorption on large functionalized NPs, small NPs (with a particle surface area comparable in size to the protein) have not received extensive study. This study determined the affinity constant (Ka) of BSA when binding to three different functionalized 5 nm gold nanoparticles (AuNPs). AuNPs were synthesized using three ω-functionalized thiols (mercaptoethoxy-ethoxy-ethanol (MEEE), mercaptohexanoic acid (MHA), and mercaptopentyltrimethylammonium chloride (MPTMA)), giving rise to particles with three different surface charges. The binding affinity of bovine serum albumin (BSA) to the different AuNP surfaces was investigated using UV-visible absorbance spectroscopy, dynamic light scattering (DLS), and fluorescence quenching titrations. Fluorescence titrations indicated that the affinity of BSA was actually highest for small AuNPs with a negative surface charge (MHA-AuNPs). Interestingly, the positively charged MPTMA-AuNPs showed the lowest Ka for BSA, indicating that electrostatic interactions are likely not the primary driving force in binding of BSA to these small AuNPs. Ka values at 25 °C for MHA, MEEE, and MPTMA-AuNPs were 5.2 ± 0.2 × 107, 3.7 ± 0.2 × 107, and 3.3 ± 0.16 × 107 M-1 in water, respectively. Fluorescence quenching titrations performed in 100 mM NaCl resulted in lower Ka values for the charged AuNPs, while the Ka value for the MEEE-AuNPs remained unchanged. Measurement of the hydrodynamic diameter (Dh) by dynamic light scattering (DLS) suggests that adsorption of 1-2 BSA molecules is sufficient to saturate the AuNP surface. DLS and negative-stain TEM images indicate that, despite the lower observed Ka values, the binding of MPTMA-AuNPs to BSA likely induces significant protein misfolding and may lead to extensive BSA aggregation at specific BSA:AuNP molar ratios.

Hyper-crosslinked Isoporous Block Copolymer Membranes with Robust Solvent Resistance and Customized Pore Sizes for Precise Separation

Isoporous block copolymer membranes are viewed as the next-generation separation membranes for their unique structures and urgent application in precise separation. However, an obvious weakness for such membranes is their poor solvent-resistance which limits their applications to aqueous solution, and isoporous membranes with superior solvent-resistance and tunable pore size have been rarely prepared before. Herein, self-supporting isoporous membranes with excellent solvent resistance are prepared by the facile yet robust hyper-crosslinking approach which is able to create a rigid network in whole membranes. The hyper-crosslinking is found to be a novel and non-destructive approach that does not change pore size and isoporous structure during the reaction, and the resulting hyper-crosslinked isoporous membranes display superior structural and separation stability to a broad range of solvents with varied polarities for months to years. More importantly, hyper-crosslinking has proved to be a universal strategy that is applicable to isoporous membranes with varied pore size and pore chemistry, offering an important opportunity to prepare solvent-resistant isoporous membranes with customizable pore size and pore functionality that are important to realize their accurate separations in organic solvents. This concept is demonstrated finally by precise and on-demand separation of nanoparticles with the prepared membranes.

Bidimensional Dynamic Magnetic Levitation: Sequential Separation of Microplastics by Density and Size

There is a current gap in sample preparation techniques integrating the separation of microplastics according to their different material types and particle sizes. We describe herein the Bidimensional Dynamic Magnetic Levitation (2D-MagLev) technique, enabling the resolution of mixtures of microplastics sorting them by plastic type and particle size. Separations are carried out in a bespoke flow cell sandwiched between two ring magnets and connected to programmable pumps for flow control. The first separation dimension is based on sequential increases in the concentration of a paramagnetic salt (MnCl2), enabling magnetic levitation of microplastics with determined densities. The second dimension is based on increasing flow rate gradients and maintaining constant MnCl2 concentrations. This fractionates the magnetically levitating microplastics according to their different particle sizes. Microplastics are therefore collected by their increasing density, and the particles corresponding to each density are fractionated from smaller to larger size. Using polyethylene microspheres with defined density (1.03-1.13 g cm-3) and size (98-390 μm) as microplastic mimicking materials, we investigated their optimum threshold velocities for their size fractionation, potential effects of medium viscosity and sample loading, and types of flow rate gradients (linear, step). Performing a separation using a combination of step gradients in both MnCl2 concentration and flow rate, mixtures comprising microplastics of two different densities and three different particle sizes were separated. 2D-MagLev is simple, fast, versatile, and robust, opening new avenues to facilitate the study of the environmental presence and impact of microplastics.

DNA Origami-Based Letterpress Printing of Gold Nanostructures with Predesigned Morphologies

Creating customizable metallic nanostructures in a simple and controllable manner has been a long-standing goal in nanoscience. In this study, we use DNA origami as a letterpress printing plate and gold nanoparticles as ink to produce predesigned gold nanostructures. The letterpress plate is reusable, enabling the repetitive production of predesigned gold nanostructures. Furthermore, by modifying the DNA origami letterpress plate on magnetic beads, we can simplify the printing processes. We have successfully printed gold nanoparticle dimers, trimers, straight and quadrilateral tetramers, and other nanostructures. Our approach improves the flexibility and stability of metallic nanostructures, simplifying both their design and their operation. It promises universal applicability in the fabrication of metamaterials, biosensors, and surface plasma nanooptics.

Efficient water-based purification of metal-organic polyhedra by centrifugal ultrafiltration

An efficient water-based purification strategy for metal-organic polyhedra (MOPs) using commercially available centrifugal ultrafiltration membranes was developed. Having a diameter above 3 nm, MOPs were almost fully retained by the filters, while free ligands and other impurities were washed away. MOP retention also enabled efficient counter-ion exchange. This method paves the way for the application of MOPs with biological systems.

Tunable-wavelength nanosecond laser tailoring of plasmon resonance spectra of gold nanoparticle colloids

Metal nanoparticles have applications across a range of fields of science and industry. While there are numerous existing methods to facilitate their large-scale production, most face limitations, particularly in achieving reproducible processes and minimizing undesirable impurities. Common issues are varying particle sizes and aggregates with unfavorable spectral properties. Researchers are currently developing methods to separate or modify nanoparticle sizes and shapes post-synthesis and to eliminate impurities. One promising approach involves laser light irradiation and enables the changing of nanoparticle sizes and shapes while controlling crucial spectral parameters. In this work, we present a novel extension of this method by irradiating nanoparticle colloids with variable-wavelength nanosecond laser pulses on both sides of the extinction band. Our results demonstrate the use of gradual laser wavelength tuning to optimize the photothermal reshaping of gold nanorods and achieve precise control over the plasmon resonance band. By irradiating both sides of the plasmon resonance band, we execute a multistep tuning process, controlling the band's width and spectral position. A statistical analysis of SEM images reveals differences in the nanorod morphology when irradiated on the long- or short-wavelength side of the plasmon resonance band. The fine-tuning of plasmonic spectral properties is desirable for various applications, including the development of sensors and filters and the exploitation of the photothermal effect. The findings of this study can be extended to other plasmonic nanostructures.

pH-Mediated Size-Selective Adsorption of Gold Nanoparticles on Diblock Copolymer Brushes

Precise control of nanoparticles at interfaces can be achieved by designing stimuli-responsive surfaces that have tunable interactions with nanoparticles. In this study, we demonstrate that a polymer brush can selectively adsorb nanoparticles according to size by tuning the pH of the buffer solution. Specifically, we developed a facile polymer brush preparation method using a symmetric polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) block copolymer deposited on a grafted polystyrene layer. This method is based on the assembly of a PS-b-P2VP thin film oriented with parallel lamellae that remains after exfoliation of the top PS-b-P2VP layer. We characterized the P2VP brush using X-ray reflectivity and atomic force microscopy. The buffer pH is used to tailor interactions between citrate-coated gold nanoparticles (AuNPs) and the top P2VP block that behaves like a polymer brush. At low pH (∼4.0) the P2VP brushes are strongly stretched and display a high density of attractive sites, whereas at neutral pH (∼6.5) the P2VP brushes are only slightly stretched and have fewer attractive sites. A quartz crystal microbalance with dissipation monitored the adsorption thermodynamics as a function of AuNP diameter (11 and 21 nm) and pH of the buffer. Neutral pH provides limited penetration depth for nanoparticles and promotes size selectivity for 11 nm AuNP adsorption. As a proof of concept, the P2VP brushes were exposed to various mixtures of large and small AuNPs to demonstrate selective capture of the smaller AuNPs. This study shows the potential of creating devices for nanoparticle size separations using pH-sensitive polymer brushes.

Dissolved metal ion removal by online hollow fiber ultrafiltration for enhanced size characterization of metal-containing nanoparticles with single-particle ICP-MS

Single particle-inductively coupled plasma mass spectrometry (SP-ICP-MS) is a powerful tool for size-characterization of metal-containing nanoparticles (MCNs) at environmentally relevant concentrations, however, coexisting dissolved metal ions greatly interfere with the accuracy of particle size analysis. The purpose of this study is to develop an online technique that couples hollow fiber ultrafiltration (HFUF) with SP-ICP-MS to improve the accuracy and size detection limit of MCNs by removing metal ions from suspensions of MCNs. Through systematic optimization of conditions including the type and concentration of surfactant and complexing agent, carrier pH, and ion cleaning time, HFUF completely removes metal ions but retains the MCNs in suspension. The optimal conditions include using a mixture of 0.05 vol.% FL-70 and 0.5 mmol/L Na₂S₂O₃ (pH = 8.0) as the carrier and 4 min as the ion cleaning time. At these conditions, HFUF-SP-ICP-MS accurately determines the sizes of MCNs, and the results agree with the size distribution determined by transmission electron microscopy, even when metal ions also are present in the sample. In addition, reducing the ionic background through HFUF also lowers the particle size detection limit with SP-ICP-MS (e.g., from 28.3 to 14.2 nm for gold nanoparticles). This size-based ion-removal principle provided by HFUF is suitable for both cations (e.g., Ag⁺) and anions (e.g., AuCl₄^-) and thus has good versatility compared to ion exchange purification and promising prospects for the removal of salts and macromolecules before single particle analysis.

Polyacrylamide gel electrophoresis: a versatile tool for the separation of nanoclusters

Atomically precise nanoclusters comprising 1-100 atoms have emerged as a new class of nanomaterials with intriguing size-dependent physicochemical properties. The significant changes in the properties of nanoclusters were observed in tailoring the number of metal atoms and ligands that determines their functions and applicability. Since 1990, thiolated gold nanoclusters have been studied. The separation of monodispersed clusters was crucial and time-consuming. To address these shortcomings, several separation techniques have made it possible to separate the series of metal nanoclusters with a precise composition of metals and ligands. Among these techniques, polyacrylamide gel electrophoresis was utilized for hydrophilic cluster separation. This review shall focus on the principle, operation and application of the polyacrylamide gel electrophoresis technique to encourage a greater understanding of the characteristics and usefulness of this method.

Microfluidic SERS devices: brightening the future of bioanalysis

A new avenue has opened up for applications of surface-enhanced Raman spectroscopy (SERS) in the biomedical field, mainly due to the striking advantages offered by SERS tags. SERS tags provide indirect identification of analytes with rich and highly specific spectral fingerprint information, high sensitivity, and outstanding multiplexing potential, making them very useful in in vitro and in vivo assays. The recent and innovative advances in nanomaterial science, novel Raman reporters, and emerging bioconjugation protocols have helped develop ultra-bright SERS tags as powerful tools for multiplex SERS-based detection and diagnosis applications. Nevertheless, to translate SERS platforms to real-world problems, some challenges, especially for clinical applications, must be addressed. This review presents the current understanding of the factors influencing the quality of SERS tags and the strategies commonly employed to improve not only spectral quality but the specificity and reproducibility of the interaction of the analyte with the target ligand. It further explores some of the most common approaches which have emerged for coupling SERS with microfluidic technologies, for biomedical applications. The importance of understanding microfluidic production and characterisation to yield excellent device quality while ensuring high throughput production are emphasised and explored, after which, the challenges and approaches developed to fulfil the potential that SERS-based microfluidics have to offer are described.

Monte Carlo simulation of dead-end diafiltration of bidispersed particle suspensions

A two-dimensional Monte Carlo simulation of dead-end diafiltration of bidispersed particle suspensions was performed. The diafiltration process involves separation of components based on their size by using a permeable membrane. The continuous model was applied to study separation of mixture of disks with diameter d and D (D>d). It was assumed that the membrane at the bottom was permeable to the particles of the smaller diameter d, and impermeable to the particles of the larger diameter D. The process of vertical filtration was accompanied by the simultaneous Brownian motion of the particles and downward movement of the piston. The mixtures with different numerical concentrations of particles, diameter ratio, and initial size of the systems in the vertical direction L_{y} have been studied. The time dependencies of the rejection coefficient k and relative height of suspension h/L_{y} revealed the presence of complete and incomplete separation regimes. The presence of filtration and diffusion-driven stratification of the disks in the vertical direction was observed. The phenomenon of incomplete separation was explained by the formation of an impenetrable barrier from larger particles at the bottom of the deposit.

Impact of Sterilization on the Colloidal Stability of Ligand-Free Gold Nanoparticles for Biomedical Applications

Sterilization is a major prerequisite for the utilization of nanoparticle colloids in biomedicine, a process well examined for particles derived from chemical synthesis although highly underexplored for electrostatically stabilized ligand-free gold nanoparticles (AuNPs). Hence, in this work, we comprehensively examined and compared the physicochemical characteristics of laser-generated ligand-free colloidal AuNPs exposed to steam sterilization and sterile filtration as a function of particle size and mass concentration and obtained physicochemical insight into particle growth processes. These particles exhibit long-term colloidal stability (up to 3 months) derived from electrostatic stabilization without using any ligands or surfactants. We show that particle growth attributed to cluster-based ripening occurs in smaller AuNPs (∼5 nm) following autoclaving, while larger particles (∼10 and ∼30 nm) remain stable. Sterile filtration, as an alternative effective sterilizing approach, has no substantial impact on the colloidal stability of AuNPs, regardless of particle size, although a mass loss of 5-10% is observed. Finally, we evaluated the impact of the sterilization procedures on potential particle functionality in proton therapy, using the formation of reactive oxygen species (ROS) as a readout. In particular, 5 nm AuNPs exhibit a significant loss in activity upon autoclaving, probably dedicated to specific surface area reduction and surface restructuring during particle growth. The filtered analog enhanced the ROS release by up to a factor of ∼2.0, at 30 ppm gold concentration. Our findings highlight the need for carefully adapting the sterilization procedure of ligand-free NPs to the desired biomedical application with special emphasis on particle size and concentration.

Effective Separation of Cancer-Derived Exosomes in Biological Samples for Liquid Biopsy: Classic Strategies and Innovative Development

Liquid biopsy has remarkably facilitated clinical diagnosis and surveillance of cancer via employing a non-invasive way to detect cancer-derived components, such as circulating tumor DNA and circulating tumor cells from biological fluid samples. The cancer-derived exosomes, which are nano-sized vesicles secreted by cancer cells have been investigated in liquid biopsy as their important roles in intracellular communication and disease development have been revealed. Given the challenges posed by the complicated humoral microenvironment, which contains a variety of different cells and macromolecular substances in addition to the exosomes, it has attracted a large amount of attention to effectively isolate exosomes from collected samples. In this review, the authors aim to analyze classic strategies for separation of cancer-derived exosomes, giving an extensive discussion of advantages and limitations of these methods. Furthermore, the innovative multi-strategy methods to realize efficient isolation of cancer-derived exosomes in practical applications are also presented. Additionally, the possible development trends of exosome separation in to the future is discussed in this review.

Partial Removal of Sugar from Apple Juice by Nanofiltration and Discontinuous Diafiltration

Partial removal of sugars in fruit juices without compromising their biofunctional properties represents a significant technological challenge. The current study was aimed at evaluating the separation of sugars from phenolic compounds in apple juice by using three different spiral-wound nanofiltration (NF) membranes with a molecular weight cut-off (MWCO) in the range of 200–500 Da. A combination of diafiltration and batch concentration processes was investigated to produce apple juice with reduced sugar content and improved health properties thanks to the preservation and concentration of phenolic compounds. For all selected membranes, permeate flux and recovery rate of glucose, fructose, and phenolic compounds, in both diafiltration and concentration processes, were evaluated. The concentration factor of target compounds as a function of the volume reduction factor (VRF) as well as the amount of adsorbed compound on the membrane surface from mass balance analysis were also evaluated. Among the investigated membranes a thin-film composite membrane with an MWCO of 200–300 Da provided the best results in terms of the preservation of phenolic compounds in the selected operating conditions. More than 70% of phenolic compounds were recovered in the retentate stream while the content of sugars was reduced by about 60%.

Recycling of Solvent Allows for Multiple Rounds of Reproducible Nanoparticle Synthesis

Metal nanoparticles have superior properties for a variety of applications. In many cases, the improved performance of metal nanoparticles is tightly correlated with their size and atomic composition. To date, colloidal synthesis is the most commonly used technique to produce metal nanoparticles. However, colloidal synthesis is currently a laboratory scale technique that has not been applied at larger scales. One of the greatest challenges facing large-scale colloidal synthesis of metal nanoparticles is the large volume of long-chain hydrocarbon solvents and surfactants needed for the synthesis, which can dominate the cost of nanoparticle production. In this work, we demonstrate a protocol, based on solvent distillation, which enables the reuse of colloidal nanoparticle synthesis surfactants and solvents for over 10 rounds of successive syntheses and demonstrates that pure solvents and surfactants are not necessarily needed to produce uniform nanocrystals. We show that this protocol can be applied to the production of a wide variety of mono- and bimetallic nanoparticles with reproducible sizes and compositions, which leads to reproducible performance as heterogeneous catalysts. A techno-economic assessment demonstrates the potential of this technique to greatly reduce the solvent-related costs of colloidal metal nanoparticle synthesis, which could contribute to its wider application at commercial scale.

Pushing the Boundaries of Multicomponent Alloy Nanostructures: Hybrid Approach of Liquid Phase Separation and Selective Leaching Processes

ConspectusAlloying, or mixing of multiple metallic elements, is the classical way of novel materials development since the Bronze age. Increased numbers of principal elements expand the compositional space for alloy design vastly, leading to nearly endless possibilities of unexpected and unique materials properties. In contrast to bulk alloying processes represented by casting of molten metal mixtures, the fabrication of multicomponent alloy (MCA) nanostructures such as nanoparticles and nanofoams with more than three elements is often challenging, and a few methodologies for directly synthesizing alloy nanostructures up to denary systems have been suggested recently. However, forming alloy nanoparticles inside another metal matrix, instead of inside aqueous media in wet-chemical synthesis, is a fairly well understood strategy in terms of physical metallurgy. Extracting those alloy nanophases from the matrix could provide an alternative way to fabricate novel MCA nanostructures.In this Account, we describe a hybrid approach of metallurgical bottom-up and chemical top-down processes for fabricating MCA nanostructures including nanoparticles and nanofoams. The former utilizes a liquid-state phase separation process that resembles "oil and water" but occurs at the nanoscale due to thermodynamic mixing relations among alloying elements and a rapid quenching process. Thermodynamic prediction of the immiscible boundary in a temperature-composition space (miscibility gap) plays a key role in designing precursor alloys for MCA nanostructures. Selective leaching, the chemical top-down process for extracting the alloy nanostructures from the precursors, uses the chemical reactivity difference between the embedded nanostructures and the matrix phase against a certain chemical solution. We discuss here that the precise control of alloy composition and cooling rate based on thermodynamic assessments enables researchers to prepare phase-separating precursor alloys for fabricating both nanoparticles and nanofoams with a broad size range from a few nanometers to a few hundred nanometers. Depending on the alloy systems, the atomic structure of alloy nanostructures could be controlled from fully amorphous to nanocrystalline and even to quasicrystalline structure. We demonstrate how the different sizes of alloy nanostructures fabricated by a single hybrid procedure can be effectively exploited for investigating size-dependent physical properties. The future and potential research directions for this hybrid approach are also briefly discussed. This unique approach for fabricating nanosized alloys provides an extended methodology to discover novel metallic nanomaterials with promising properties in diverse compositional spaces of MCA systems.

Thermodynamics of nanocrystal–ligand binding through isothermal titration calorimetry

Manipulations of nanocrystal (NC) surfaces have propelled the applications of colloidal NCs across various fields such as bioimaging, catalysis, electronics, and sensing applications.

Size Distributions of Gold Nanoparticles in Solution Measured by Single-Particle Mass Photometry

Specialized applications of nanoparticles often call for particular, well-characterized particle size distributions in solution, but this property can prove difficult to measure. High-throughput methods, such as dynamic light scattering, detect nanoparticles in solution with an efficiency that scales with diameter to the sixth power. This diminishes the accuracy of any determination that must span a range of particle sizes. The accurate classification of broadly distributed systems thus requires very large numbers of measurements. Mass-filtered particle-sensing techniques offer a better dynamic range but are labor-intensive and so have low throughput. Progress in many areas of nanotechnology requires a faster, lower-cost, and more accurate measure of particle size distributions, particularly for diameters smaller than 20 nm. Here, we present a tailored interferometric microscope system, combined with a high-speed image-processing strategy, optimized for real-time particle tracking that determines accurate size distributions in nominal 5, 10, and 15 nm colloidal gold nanoparticle systems by automatically sensing and classifying thousands of single particles sampled from solution at rates as high as 4000 particles per minute. We demonstrate this method by sensing the irreversible binding of gold nanoparticles to poly-d-lysine functionalized coverslips. Variations in the single-particle signal as a function of time and mass, calibrated by TEM, show clear evidence for the presence of diffusion-limited transport that most affects larger particles in solution.

Current advances in bio-fabricated quantum dots emphasising the study of mechanisms to diversify their catalytic and biomedical applications

Quantum dots (QDs), owing to their single atom-like electronic structure due to quantum confinement, are often referred to as artificial atoms. This unique physical property results in the diverse functions exhibited by QDs. A wide array of applications have been achieved by the surface functionalization of QDs, resulting in exceptional optical, antimicrobial, catalytic, cytotoxic and enzyme inhibition properties. Ordinarily, traditionally prepared QDs are subjected to post synthesis functionalization via a variety of methods, such as ligand exchange or covalent and non-covalent conjugation. Nevertheless, solvent toxicity, combined with the high temperature and pressure conditions during the preparation of QDs and the low product yield due to multiple steps in the functionalization, limit their overall use. This has driven scientists to investigate the development of greener, environmental friendly and cost-effective methods that can circumvent the complexity and strenuousness associated with traditional processes of bio-functionalization. In this review, a detailed analysis of the methods to bio-prepare pre-functionalized QDs, with elucidated mechanisms, and their application in the areas of catalysis and biomedical applications has been conducted. The environmental and health and safety aspects of the bio-derived QDs have been briefly discussed to unveil the future of nano-commercialization.

Effect of colloid-size copper-based pesticides and wood-preservatives against microbial activities of Gram-positive Bacillus species using five-day biochemical oxygen demand test

Copper-based pesticides and wood preservatives could end up in the environment during production, use, and end-of-life via different pathways that could cause unintended ecological and adverse health effects. This paper provides the effect of colloid-size Cu-based pesticides (CuPRO and Kocide), micronized Cu azole (MCA-1 and MCA-2) and alkaline Cu quaternary (ACQ) treated woods, Cu²⁺, Cu²⁺ spiked untreated wood (UTW), and CuCO₃ solutions against Gram-positive Bacillus species using five-day biochemical oxygen demand (BOD₅) standard test. The total Cu leached from MCA-1, MCA-2, and ACQ in Milli-Q water after 5 days were ~0.1, ~0.11, and ~0.64 g/kg of wood, respectively. However, the form of Cu leached from MCA woods was mostly ionic (> 90%). The total organic carbon (TOC) content of any tested wood (UTW/MCA-1/MCA-2/ACQ) was ~99% of its corresponding total carbon (TC) content, whereas the TOC of any tested wood sawdust exceeded that of its corresponding piece/block by > 300%. The dissolved oxygen (DO) consumption value in the presence of Cu²⁺, CuCO₃, CuPRO, and Kocide solutions was significantly influenced by Cu particles/ions. However, the DO consumption value in the presence of UTW/MCA-1/MCA-2/ACQ woods was significantly influenced by organics leached from woods. On the other hand, the DO consumption of MCA sawdust was greater than (300%) that of MCA pieces/block. The findings of this study provide more insight into how organics leached from woods significantly reduce the toxic effects of Cu ions against Gram-positive Bacillus species.

Synthesis and bioconjugation of alkanethiol-stabilized gold bipyramid nanoparticles

Gold bipyramid (GBP) nanoparticles are promising for a range of biomedical applications, including biosensing and surface-enhanced Raman spectroscopy, due to their favorable optical properties and ease of chemical functionalization. Here we report improved synthesis methods, including preparation of gold seed particles with an increased shelf life of ∼1 month, and preparation of GBPs with significantly shortened synthesis time (< 1 h). We also report methods for the functionalization and bioconjugation of the GBPs, including functionalization with alkanethiol self-assembled monolayers (SAMs) and bioconjugation with proteins via carbodiimide cross-linking. Binding of specific antibodies to the nanoparticle-bound proteins was subsequently observed via localized surface plasmon resonance sensing. Rabbit IgG and goat anti-Rabbit IgG antibodies were used as a model system for antibody-antigen interactions. As-synthesized, SAM-functionalized, and bioconjugated bipyramids were characterized using scanning electron microscopy, UV-vis spectroscopy, zeta potential, and dynamic light scattering.

A novel approach to imaging engorged ticks: Micro-CT scanning of Ixodes ricinus fed on blood enriched with gold nanoparticles

Micro-computed tomography (micro-CT) is an exceptional imaging modality which is limited in visualizing soft biological tissues that need pre-examination contrasting steps, which can cause serious deformation to sizeable specimens like engorged ticks. The aim of this study was to develop a new technique to bypass these limitations and allow the imaging of fed ticks in their natural state. To accomplish this, adult Ixodes ricinus females were allowed to engorge in vitro on blood supplemented with PEGylated gold nanoparticles (PEG-AuNPs). In total, 73/120 females divided into 6 groups engorged on blood enriched with 0.07-2.16 mg PEG-AuNPs per ml of blood. No toxic effect was observed for any of the tested groups compared to the control group, in which 12/20 females engorged on clear blood. The ticks were scanned on a Bruker micro-CT SkyScan 1276. The mean radiodensity of the examined ticks exceeded 0 Hounsfield Units only in the case of the two groups with the highest concentration. The best contrast was observed in ticks engorged on blood with the highest tested concentration of 2.16 mg/mL PEG-AuNPs. In these ticks, the midgut and rectal sac were clearly visible. Also, the midgut lumen volume was computed from segmented image data. The reduction in midgut volume was documented during the egg development process. According to this pilot study, micro-CT of ticks engorged on blood supplemented with contrasting agents in vitro may reveal additional information regarding the engorged ticks' anatomy.

Eco-friendly synthesis of silver nanoparticles by Bacillus subtilis and their antibacterial activity

Bacillus subtilis was used for biogenic of silver nanoparticles. Characterization of the prepared silver nanoparticles was done by UV-Vis spectroscopy, Transmission Electron Microscopy (TEM), and Fourier Transform Infrared Spectroscopy (FT-IR). The particle size of the prepared nanoparticles ranges from 3 to 20 nm with spherical or roughly spherical forms. The antimicrobial efficacy of the produced nanoparticles was investigated against five strains of multidrug resistant microorganisms including: Staphylococcus aureus (MRSA), Staphylococcu s epidermidis, Klebsiella. pneumoniae, Escherichia coli and Candida albicans tested as yeast. During this study, the minimum inhibitory concentrations (MICs) and the minimum lethal concentrations (MLCs) of synthesized silver nanoparticles were detected using selected strains of the genus Bacillus by a broth dilution method. The rate of MIC of the prepared silver nano-particles versus the investigated clinical isolates exhibit a massive anti-microbial efficacy; (230 µgml-1) for MRSA; 180 for Staphylococcus epidermidis, 200 for Escherichia coli and 100 µgml-1 for Candida albicans. On the other hand, the lowest anti-microbial efficacy (300 µgml-1) was appeared for Klebsiella pneumonia. The obtained results demonstrated the effectiveness of the biogenic nanoparticles and the possibility of using them as a new method in combating infectious diseases.

Role of water chemistry on stability, aggregation, and dissolution of uncoated and carbon-coated copper nanoparticles

Intentional or accidental release of copper nanoparticles (Cu-NPs) from consumer products during manufacturing, use, and end-of-life management could pose health and ecological risks. This paper presents a detailed study on the role of water chemistry on the fate of uncoated and carbon-coated Cu-NPs dispersed in aqueous cetyltrimethylammonium bromide (CTAB) surfactant in the presence and absence of humic acids (HAs). A range of water chemistry and HAs had minimum impact on hydrodynamic diameter and zeta-potential values of uncoated and carbon-coated Cu-NPs. The water pH significantly (p < 0.001) affected the aggregation of uncoated Cu-NPs unlike that of carbon-coated Cu-NPs; however, the presence of HAs increased the stability of uncoated Cu-NPs. Although CTAB is considered as an efficient dispersant to stabilize Cu-NPs, the effect descended with time for uncoated Cu-NPs. The dissolution of Cu over time decreased with increasing pH for both uncoated (0.5-50% weight) and carbon-coated (0.5-40% weight) Cu-NPs. However, carbon-coated Cu-NPs exhibited significant dissolution (p < 0.001) at neutral pH than uncoated Cu-NPs may be due to the additional carbon it acquired during coating. Increasing HAs concentration from 0 to 15 mg L^-1 at pH 5.5 inhibited aggregations but enhanced dissolution of the uncoated and carbon-coated Cu-NPs. These findings inform risk analysis of Cu-NPs including how Cu-NPs fate, mobility and bioavailability are modulated by particles coating and dispersant, HAs presence, water chemistry and exposure time in dispersion media.

A modified and simplified method for purification of gold nanoparticles

2 nm gold nanoparticles (AuNPs) have promising applications within drug and protein delivery, bioimaging, and biosensing. By performing ligand place-exchange reactions, AuNPs protected with alkanethiolate ligands can be functionalized to regulate their behaviors. In this reaction, a new ligand is incorporated by mixing a thiol with the AuNPs. To remove the excess new ligand as well as the displaced thiolate, dialysis has previously been the most widely used method. However, this purification method is time-consuming and fails to remove unwanted thiols completely. In this study, we describe a fast and efficient procedure to purify AuNP aqueous solution through liquid-liquid extraction using dichloromethane.•We demonstrate a facile way to purify AuNPs after ligand place-exchange reactions through liquid-liquid extraction.•Liquid-liquid extraction is a simple, inexpensive and efficient method for AuNP purification.•This protocol enables us to completely purify AuNPs in a few hours and can be used as a much quicker and more scaleable valid alternative to dialysis.

Surface Coating Structure and Its Interaction with Cytochrome c in EG6-Coated Nanoparticles Varies with Surface Curvature

The composition, orientation, and conformation of proteins in biomolecular coronas acquired by nanoparticles in biological media contribute to how they are identified by a cell. While numerous studies have investigated protein composition in biomolecular coronas, relatively little detail is known about how the nanoparticle surface influences the orientation and conformation of the proteins associated with them. We previously showed that the peripheral membrane protein cytochrome c adopts preferred poses relative to negatively charged 3-mercaptopropionic acid (MPA)-gold nanoparticles (AuNPs). Here, we employ molecular dynamics simulations and complementary experiments to establish that cytochrome c also assumes preferred poses upon association with nanoparticles functionalized with an uncharged ligand, specifically ω-(1-mercaptounde-11-cyl)hexa(ethylene glycol) (EG₆). We find that the display of the EG₆ ligands is sensitive to the curvature of the surface-and, consequently, the effective diameter of the nearly spherical nanoparticle core-which in turn affects the preferred poses of cytochrome c.

Influence of water chemistry on colloid-size Cu-based pesticides particles: A case of Cu(OH)2 commercial fungicide/bactericide

The intensive, widespread, and ever-increasing applications of Cu-based pesticides in agriculture could potentially increase environmental exposures via different routes. Unlike ionic/bulk forms, the fate, transport, and toxicity of colloid-size Cu-based pesticides are not well studied. This paper provides evaluation outcomes of granule and dispersion characterizations, stability, and dissolution of colloid-size particles of Cu(OH)₂ commercial pesticide product at a range of water chemistry. The evaluated product contained about 35% weight of metallic Cu equivalent and Cu(OH)₂ particles with sizes < 1 μm of which a fraction of nanoscale particles exist. The presence of Ca²⁺ at ionic strengths of >0.01 M and 0.001-0.2 M significantly influenced (p < 0.001) particle size (PS) and ζ-potential values, respectively at all investigated pH values. Cu dissolution at pH 5.5 was significant (p < 0.001) and exceeded Cu dissolutions at pH 7.0 by 87-90% and at pH 8.5 by 87-95% in all dispersions. The order of Cu dissolution was pH 5.5 > pH 7.0 > pH 8.5 in all dispersions. Cu dissolution was relatively reduced by 53% by increasing HA from 0 to 5 mg L^-1 and enhanced by 55% by increasing HA from 5 to 15 mg L^-1, however, the overall Cu dissolution was decreased by 27% by increasing HA from 0 to 15 mg L^-1. Thus, HAs reduced the dissolution of Cu at pH < 7. The findings provide an insight into how water chemistry influences the fate and transport of colloid-size Cu-based pesticides particles.

Tangential flow microfluidics for the capture and release of nanoparticles and extracellular vesicles on conventional and ultrathin membranes

Membranes have been used extensively for the purification and separation of biological species. A persistent challenge is the purification of species from concentrated feed solutions such as extracellular vesicles (EVs) from biological fluids. We investigated a new method to isolate micro- and nano-scale species termed tangential flow for analyte capture (TFAC), which is an extension of traditional tangential flow filtration (TFF). Initially, EV purification from plasma on ultrathin nanomembranes was compared between both normal flow filtration (NFF) and TFAC. NFF resulted in rapid formation of a protein cake which completely obscured any captured EVs and also prevented further transport across the membrane. On the other hand, TFAC showed capture of CD63 positive small EVs (sEVs) with minimal contamination. We explored the use of TFAC to capture target species over membrane pores, wash and then release in a physical process that does not rely upon affinity or chemical interactions. This process of TFAC was studied with model particles on both ultrathin nanomembranes and conventional thickness membranes (polycarbonate track-etch). Successful capture and release of model particles was observed using both membranes. Ultrathin nanomembranes showed higher efficiency of capture and release with significantly lower pressures indicating that ultrathin nanomembranes are well-suited for TFAC of delicate nanoscale particles such as EVs.

Assessing the Surface Oxidation State of Free-Standing Gold Nanoparticles Produced by Laser Ablation

The surface chemistry of gold nanoparticles produced by the pulsed laser ablation in liquids method is investigated by X-ray photoelectron spectroscopy (XPS). The presence of surface oxide expected on these systems is investigated using synchrotron radiation in conditions close to their original state in solvent but free from substrate or solvent effects which could affect the interpretation of spectroscopic observations. For that purpose we performed the experiment on a controlled free-standing nanoparticle beam produced by combination of an atomizer and an aerodynamic lens system. These results are compared with those obtained by the standard situation of deposited nanoparticles on silicon substrate. An accurate analysis based on Bayesian statistics concludes that the existence of oxide in the free-standing conditions cannot be solely confirmed by the recorded core-level 4f spectra. If present, our data indicate an upper limit of 2.15 ± 0.68% of oxide. However, a higher credence to the hypothesis of its existence is brought by the structureless valence profile of the free-standing beam. Moreover, the cross-comparison with the deposited nanoparticles case clearly evidences an important misleading substrate effect. Experiment with free-standing nanoparticles is then demonstrated to be the right way to further investigate oxidation states on Au nanoparticles.

Structural and optical properties of penicillamine-protected gold nanocluster fractions separated by sequential size-selective fractionation

Polydisperse water-soluble gold nanoclusters (AuNCs) protected by penicillamine have been synthesized in this work. The sequential size-selective precipitation (SSSP) technique has been applied for the size fractionation and purification of the monolayer-protected AuNCs. Through continuously adding acetone to a crude AuNC aqueous solution and controlling the volume percentage of acetone, we successfully separated the polydisperse AuNCs with diameters ranging from 0.5 to 5.4 nm into four different fractions sequentially. High-resolution transmission electron microscopy (HRTEM) shows that the four fractions are well-dispersed spherical particles of diameter 3.0 ± 0.6, 2.3 ± 0.5, 1.7 ± 0.4, and 1.2 ± 0.4 nm. Proton nuclear magnetic resonance spectroscopy suggests that disulfide, excess ligands and gold(I) complexes were removed from the AuNCs fractions. These results demonstrate the considerable potential of the SSSP technique for size-based separation and purification of AuNCs, achieving not only the isolation of larger nanoclusters (NCs) from small NCs in a continuous fashion, but also for the removal of small-molecule impurities. Based on the results from the mass spectrometry and thermogravimetric analysis, the average composition of the four fractions can be represented by Au₃₈(SR)₁₈, Au₂₈(SR)₁₅, Au₁₈(SR)₁₂, and Au₁₁(SR)₈, respectively. This indicates that the SSSP separation is mainly dependent on the core size and the ratio of Au atoms to ligands of AuNCs. X-ray photoelectron spectroscopy (XPS) has also been applied to observe the molecular dependence on the gold and sulfur chemical state of organosulfur monolayers of the fractions. The photoluminescence spectra of these AuNCs in the range of 900-790 nm was investigated at room temperature. The results show that the peak emission energy of the size-selected AuNCs undergoes a blue shift when the size is decreased, which can be attributed to the quantum confinement effect.

High-Level Extraction of Recyclable Nanocatalysts by Using Polyphosphazene Microparticles

Improper disposal of metal nanoparticles has caused serious environmental and pathological problems because of their active nanotoxicity. Therefore, there is an urgent need to develop a strategy for efficiently removing redundant metal nanoparticles from water, while also permitting restoration of their catalytic activities to those of pristine particles for reapplication. Herein, we present intrinsically nitrogen-rich cross-linked polyphosphazene microparticles to capture silver nanoparticles (AgNPs) from aqueous media by a simple one-step method. The described microparticles exhibit an outstanding adsorption capacity for AgNPs of approximately 59.35 mg/g, exceeding those of other adsorbents. The adsorption kinetics of AgNPs on these microparticles obeyed a pseudo-second-order kinetic model. More importantly, the recovered AgNPs maintained good catalytic activity in the reduction of methylene blue by sodium borohydride. Based on their simple preparation, high adsorption efficiency, and nondestructive effect on the catalytic activity of the recovered AgNPs, the described polyphosphazene microparticles display promising potential for the removal and recovery of AgNPs from water.

Systematic determination of the relationship between nanoparticle core diameter and toxicity for a series of structurally analogous gold nanoparticles in zebrafish

Predictive models for the impact of nanomaterials on biological systems remain elusive. Although there is agreement that physicochemical properties (particle diameter, shape, surface chemistry, and core material) influence toxicity, there are limited and often contradictory, data relating structure to toxicity, even for core diameter. Given the importance of size in determining nanoscale properties, we aimed to address this data gap by examining the biological effects of a defined series of gold nanoparticles (AuNPs) on zebrafish embryos. Five AuNPs samples with narrowly spaced core diameters (0.8-5.8 nm) were synthesized and functionalized with positively charged N,N,N-trimethylammonium ethanethiol (TMAT) ligands. We assessed the bioactivity of these NPs in a high-throughput developmental zebrafish assay at eight concentrations (0.5-50 µg/mL) and observed core diameter-dependent bioactivity. The smaller diameter AuNPs were the most toxic when expressing exposures based on an equal mass. However, when expressing exposures based on total surface area, toxicity was independent of the core diameter. When holding the number of nanoparticles per volume constant (at 6.71 × 10¹³/mL) in the exposure medium across AuNPs diameters, only the 5.8 nm AuNPs exhibited toxic effects. Under these exposure conditions, the uptake of AuNPs in zebrafish was only weakly associated with core diameter, suggesting that differential uptake of TMAT-AuNPs was not responsible for toxicity associated with the 5.8 nm core diameter. Our results indicate that larger NPs may be the most toxic on a per particle basis and highlight the importance of using particle number and surface area, in addition to mass, when evaluating the size-dependent bioactivity of NPs.

One-Pot Synthesis of Epirubicin-Capped Silver Nanoparticles and Their Anticancer Activity against Hep G2 Cells

Epirubicin-capped silver nanoparticles (NPs) were synthesized through a one-pot method by using epirubicin as both the functional drug and the reducing agent of Ag⁺ to Ag⁰. The preparation process was accomplished in 1 h. In addition, the obtained epirubicin-capped silver nanoparticle was characterized by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and infrared spectroscopy. The results showed that a layer of polymer epirubicin had formed around the silver nanoparticle, which was 30-40 nm in diameter. We further investigated the antitumor activity of the prepared epirubicin-capped silver nanoparticle, and the half maximal inhibitory concentration (IC₅₀) against Hep G2 cells was 1.92 μg/mL, indicating a good antitumor property of the nanoparticle at low dosage.

Peripheral Membrane Proteins Facilitate Nanoparticle Binding at Lipid Bilayer Interfaces

Molecular understanding of the impact of nanomaterials on cell membranes is critical for the prediction of effects that span environmental exposures to nanoenabled therapies. Experimental and computational studies employing phospholipid bilayers as model systems for membranes have yielded important insights but lack the biomolecular complexity of actual membranes. Here, we increase model membrane complexity by incorporating the peripheral membrane protein cytochrome c and studying the interactions of the resulting membrane systems with two types of anionic nanoparticles. Experimental and computational studies reveal that the extent of cytochrome c binding to supported lipid bilayers depends on anionic phospholipid number density and headgroup chemistry. Gold nanoparticles functionalized with short, anionic ligands or wrapped with an anionic polymer do not interact with silica-supported bilayers composed solely of phospholipids. Strikingly, when cytochrome c was bound to these bilayers, nanoparticles functionalized with short anionic ligands attached to model biomembranes in amounts proportional to the number of bound cytochrome c molecules. In contrast, anionic polymer-wrapped gold nanoparticles appeared to remove cytochrome c from supported lipid bilayers in a manner inversely proportional to the strength of cytochrome c binding to the bilayer; this reflects the removal of a weakly bound pool of cytochrome c, as suggested by molecular dynamics simulations. These results highlight the importance of the surface chemistry of both the nanoparticle and the membrane in predicting nano-bio interactions.

Continuous synthesis of gold nanoparticles in micro- and millifluidic systems

Gold nanomaterials have diverse applications ranging from healthcare and nanomedicine to analytical sciences and catalysis. Microfluidic and millifluidic reactors offer multiple advantages for their synthesis and manufacturing, including controlled or fast mixing, accurate reaction time control and excellent heat transfer. These advantages are demonstrated by reviewing gold nanoparticle synthesis strategies in flow devices. However, there are still challenges to be resolved, such as reactor fouling, particularly if robust manufacturing processes are to be developed to achieve the desired targets in terms of nanoparticle size, size distribution, surface properties, process throughput and robustness. Solutions to these challenges are more effective through a coordinated approach from chemists, engineers and physicists, which has at its core a qualitative and quantitative understanding of the synthesis processes and reactor operation. This is important as nanoparticle synthesis is complex, encompassing multiple phenomena interacting with each other, often taking place at short timescales. The proposed methodology for the development of reactors and processes is generic and contains various interconnected considerations. It aims to be a starting point towards rigorous design procedures for the robust and reproducible continuous flow synthesis of gold nanoparticles.

Graphical Abstract:

Sorting Metal Nanoparticles with Dynamic and Tunable Optical Driven Forces

Precise sorting of colloidal nanoparticles is a challenging yet necessary task for size-specific applications of nanoparticles in nanophotonics and biochemistry. Here we present a new strategy for all-optical sorting of metal nanoparticles with dynamic and tunable optical driven forces generated by phase gradients of light. Size-dependent optical forces arising from the phase gradients of optical line traps can drive nanoparticles of different sizes with different velocities in solution, leading to their separation along the line traps. By using a sequential combination of optical lines to create differential trapping potentials, we realize precise sorting of silver and gold nanoparticles in the diameter range of 70-150 nm with a resolution down to 10 nm. Separation of the nanoparticles agrees with the analysis of optical forces acting on them and with simulations of their kinetic motions. The results provide new insights into all-optical nanoparticle manipulation and separation and reveal that there is still room to sort smaller nanoparticle with nanometer precision using dynamic phase-gradient forces.

Synergistic Toxicity Produced by Mixtures of Biocompatible Gold Nanoparticles and Widely Used Surfactants

Nanoparticle safety is usually determined using solutions of individual particles that are free of additives. However, the size-dependent properties of nanoparticles can be readily altered through interactions with other components in a mixture. In applications, nanoparticles are commonly combined with surfactants or other additives to increase dispersion or to enhance product performance. Surfactants might also influence the biological activity of nanoparticles; however, little is known about such effects. We investigated the influence of surfactants on nanoparticle biocompatibility by studying mixtures of ligand-stabilized gold nanoparticles and Polysorbate 20 in embryonic zebrafish. These mixtures produced synergistic toxicity at concentrations where the individual components were benign. We examined the structural basis for this synergy using solution-phase analytical techniques. Spectroscopic and X-ray scattering studies suggest that the Polysorbate 20 does not affect the nanoparticle core structure. DOSY NMR showed that the hydrodynamic size of the nanoparticles increased, suggesting that Polysorbate 20 assembles on the nanoparticle surfaces. Mass spectrometry showed that these assemblies have both increased uptake and increased toxicity in zebrafish, as compared to the gold nanoparticles alone. We probed the generality of this synergy by performing toxicity assays with two other common surfactants, Polysorbate 80 and sodium dodecyl sulfate. These surfactants also caused synergistic toxicity, although the extent and time frame of the response depends upon the surfactant structure. These results demonstrate a need for additional, foundational studies to understand the effects of surfactants on nanoparticle biocompatibility and challenge traditional models of nanoparticle safety where the matrix is assumed to have only additive effects on nanoparticle toxicity.