Multivalent Binding Motifs for the Noncovalent Functionalization of Graphene

Rubredoxin Protein Scaffolds Sourced from Diverse Environmental Niches as an Artificial Hydrogenase Platform

Nickel-substituted rubredoxin (NiRd) from Desulfovibrio desulfuricans has previously been shown to act as both a structural and functional mimic of the [NiFe] hydrogenase. However, improvements both in turnover frequency and overpotential are needed to rival the native [NiFe] hydrogenase enzymes. Characterization of a library of NiRd mutants with variations in the secondary coordination sphere suggested that protein dynamics played a substantial role in modulating activity. In this work, rubredoxin scaffolds were selected from diverse organisms to study the effects of distal sequence variation on catalytic activity. It was found that though electrochemical catalytic activity was only slightly impacted across the series, the Rd sequence from a psychrophilic organism exhibited substantially higher levels of solution-phase hydrogen production. Additionally, Eyring analyses suggest that catalytic activation properties relate to the growth temperature of the parent organism, implying that the general correlation between the parent organism environment and catalytic activity often seen in naturally occurring enzymes may also be observed in artificial enzymes. Selecting protein scaffolds from hosts that inhabit diverse environments, particularly low-temperature environments, represents an alternative approach for engineering artificial metalloenzymes.

Graphene-Based Wearable Temperature Sensors: A Review

Flexible sensing electronics have received extensive attention for their potential applications in wearable human health monitoring and care systems. Given that the normal physiological activities of the human body are primarily based on a relatively constant body temperature, real-time monitoring of body surface temperature using temperature sensors is one of the most intuitive and effective methods to understand physical conditions. With its outstanding electrical, mechanical, and thermal properties, graphene emerges as a promising candidate for the development of flexible and wearable temperature sensors. In this review, the recent progress of graphene-based wearable temperature sensors is summarized, including material preparation, working principle, performance index, classification, and related applications. Finally, the challenges and future research emphasis in this field are put forward. This review provides important guidance for designing novel and intelligent wearable temperature-sensing systems.

An SECM-Based Spot Analysis for Redoxmer-Electrode Kinetics: Identifying Redox Asymmetries on Model Graphitic Carbon Interfaces

The fundamental process in non-aqueous redox flow battery (NRFB) operation revolves around electron transfer (ET) between a current collector electrode and redox-active organic molecules (redoxmers) in solution. Here, we present an approach utilizing scanning electrochemical microscopy (SECM) to evaluate interfacial ET kinetics between redoxmers and various electrode materials of interest at desired locations. This spot-analysis method relies on the measurement of heterogeneous electron transfer rate constants (k_f or k_b ) as a function of applied potential (E-E⁰ '). As demonstrated by COMSOL simulations, this method enables the quantification of Butler-Volmer kinetic parameters, the standard heterogeneous rate constant, k⁰ , and the transfer coefficient, α. Our method enabled the identification of inherent asymmetries in the ET kinetics arising during the reduction of ferrocene-based redoxmers, compared to their oxidation which displayed faster rate constants. Similar behavior was observed on a wide variety of carbon electrodes such as multi-layer graphene, highly ordered pyrolytic graphite, glassy carbon, and chemical vapor deposition-grown graphite films. However, aqueous systems and Pt do not exhibit such kinetic effects. Our analysis suggests that differential adsorption of the redoxmers is insufficient to account for our observations. Displaying a greater versatility than conventional electroanalytical methods, we demonstrate the operation of our spot analysis at concentrations up to 100 mM of redoxmer over graphite films. Looking forward, our method can be used to assess non-idealities in a variety of redoxmer/electrode/solvent systems with quantitative evaluation of kinetics for applications in redox-flow battery research.

Rapid Access to Chiral and Tripodal Cavitands from β-Pinene

We report Pd-catalyzed cyclotrimerization of (+)-α-bromoenone, obtained from monoterpene β-pinene, into an enantiopure cyclotrimer. This C3 symmetric compound has three bicyclo[3.1.1]heptane rings fused to its central benzene with each ring carrying a carbonyl group. The cyclotrimer undergoes diastereoselective threefold alkynylation with the lithium salts of five terminal alkynes (41-63 %, de=4-83 %). The addition enabled a rapid synthesis of a small library of novel chiral cavitands that, in shape, resemble a tripod stand. These molecular tripods include a tris-bicycloannelated benzene head attached to three alkyne legs twisted in one direction to form a nonpolar cavity with polar groups as feet. Tripods with methylpyridinium and methylisoquinolinium legs, respectively, form inclusion complexes with anti-inflammatory and chiral drugs (R)/(S)-ibuprofen and (R)/(S)-naproxen. The mode of binding shows drug molecules docked in the cavity of the host through ion-ion, cation-π, and C-H-π contacts that, in addition of desolvation, give rise to complexes having millimolar to micromolar stability in water. Our findings open the door to creating a myriad of enantiopure tripods with tunable functions that, in the future, might give novel chemosensors, catalysts or sequestering agents.

Selective Polyetheretherketone Implants Combined with Graphene Cause Definitive Cell Adhesion and Osteogenic Differentiation

INTRODUCTION

Polyetheretherketone (PEEK) has good biosafety and chemical stability for bone repair. However, PEEK is biologically inert and cannot promote bone apposition. This study investigated whether graphene-modified PEEK (G-PEEK) could improve cell adhesion and osteogenic differentiation.

METHODS

G-PEEK was prepared by melted blending and was characterized. In vitro, the biocompatibility of G-PPEK and the ability to promote cell adhesion and osteogenic differentiation in rabbit bone marrow mesenchymal stem cells (rBMSCs) were examined using live and dead cell double staining, the cell counting kit-8 (CCK-8) assay, immunofluorescence and quantitative real-time PCR (qRT‒PCR). An in vivo rabbit extra-articular graft-to-bone healing model was established. At 4 and 12 weeks after surgery, CT analysis and histological evaluation were performed.

RESULTS

In vitro, G-PEEK significantly improved the adhesion and proliferation of rBMSCs, with good biocompatibility. In vivo, G-PEEK promoted new bone formation at the site of the bone defect.

CONCLUSION

G-PEEK showed excellent osteogenesis performance, which promises new applications in implant materials.

A Spectroscopically Observed Iron Nitrosyl Intermediate in the Reduction of Nitrate by a Surface-Conjugated Electrocatalyst

We report an iron-based graphite-conjugated electrocatalyst (GCC-FeDIM) that combines the well-defined nature of homogeneous molecular electrocatalysts with the robustness of a heterogeneous electrode. A suite of spectroscopic methods, supported by the results of DFT calculations, reveals that the electrode surface is functionalized by high spin (S = 5/2) Fe(III) ions in an FeN₄Cl₂ coordination environment. The chloride ions are hydrolyzed in aqueous solution, with the resulting cyclic voltammogram revealing a Gaussian-shaped wave assigned to 1H⁺/1e^- reduction of surface Fe(III)-OH surface. A catalytic wave is observed in the presence of NO₃^-, with an onset potential of -1.1 V vs SCE. At pH 6.0, GCC-FeDIM rapidly reduces NO₃^- to ammonium and nitrite with 88 and 6% Faradaic efficiency, respectively. Mechanistic studies, including in situ X-ray absorption spectroscopy, suggest that electrocatalytic NO₃^- reduction involves an iron nitrosyl intermediate. The Fe-N bond length (1.65 Å) is similar to that observed in {Fe(NO)}⁶ complexes, which is supported by the results of DFT calculations.

Biofunctionalization of Graphene-Based FET Sensors through Heterobifunctional Nanoscaffolds: Technology Validation toward Rapid COVID-19 Diagnostics and Monitoring

The biofunctionalization of graphene field-effect transistors (GFETs) through vinylsulfonated-polyethyleneimine nanoscaffold is presented for enhanced biosensing of severe acute respiratory-related coronavirus 2 (SARS-CoV-2) spike protein and human ferritin, two targets of great importance for the rapid diagnostic and monitoring of individuals with COVID-19. The heterobifunctional nanoscaffold enables covalent immobilization of binding proteins and antifouling polymers while the whole architecture is attached to graphene by multivalent π-π interactions. First, to optimize the sensing platform, concanavalin A is employed for glycoprotein detection. Then, monoclonal antibodies specific against SARS-CoV-2 spike protein and human ferritin are anchored, yielding biosensors with limit of detections of 0.74 and 0.23 nm, and apparent affinity constants (K D G F E T ) of 6.7 and 8.8 nm, respectively. Both biosensing platforms show good specificity, fast time response, and wide dynamic range (0.1-100 nm). Moreover, SARS-CoV-2 spike protein is also detected in spiked nasopharyngeal swab samples. To rigorously validate this biosensing technology, the GFET response is matched with surface plasmon resonance measurements, exhibiting linear correlations (from 2 to 100 ng cm-2) and good agreement in terms of K D values. Finally, the performance of the biosensors fabricated through the nanoscaffold strategy is compared with those obtained through the widely employed monopyrene approach, showing enhanced sensitivity.

The laccase mediator system at carbon nanotubes for anthracene oxidation and femtomolar electrochemical biosensing

We investigated the use of POXA1b laccase from Pleurotus ostreatus for the oxidation of anthracene into anthraquinone. We show that different pathways can occur depending on the nature of the redox mediator combined to laccase, leading to different structural isomers. The laccase combined with 2,2'-azine-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) leads to the formation of 1,4-anthraquinone and/or 1,2-anthraquinone. The unprecedented role of carbon nanotubes (CNTs) as redox mediators for oxidation of anthracene into 9,10-anthraquinone is shown and corroborated by density-functional theory (DFT) calculations. Owing to the efficient adsorption of anthraquinones at CNT electrodes, anthracene can be detected with low limit-of-detection using either laccase in solution, CNT-supported laccase or laccase immobilized at magnetic beads exploiting the adhesive property of a chimeric hydrophobin-laccase.

Supramolecular Nanopatterns of Molecular Spoked Wheels with Orthogonal Pillars: The Observation of a Fullerene Haze

Molecular spoked wheels with intraannular functionalizable pillars are synthesized in a modular approach. The functionalities at their ends are variable, and a propargyl alcohol, a [6,6]-phenyl-C61-butyrate, and a perylene monoimide are investigated. All compounds form two-dimensional crystals on highly oriented pyrolytic graphite at the solid-liquid interface. As determined by submolecularly resolved scanning tunneling microscopy, the pillars adopt equilibrium distances of 6.0 nm. The fullerene has a residual mobility, limited by the length of the flexible connector unit. The experimental results are supported and rationalized by molecular dynamics simulations. These also show that, in contrast, the more rigidly attached perylene monoimide units remain oriented along the surface normal and maintain a smallest distance of 2 nm above the graphite substrate. The robust packing concept also holds for cocrystals with molecular hexagons that expand the pillar-pillar distances by 15 % and block unspecific intercalation.

Surface Engineering of Graphene through Heterobifunctional Supramolecular-Covalent Scaffolds for Rapid COVID-19 Biomarker Detection

Graphene is a two-dimensional semiconducting material whose application for diagnostics has been a real game-changer in terms of sensitivity and response time, variables of paramount importance to stop the COVID-19 spreading. Nevertheless, strategies for the modification of docking recognition and antifouling elements to obtain covalent-like stability without the disruption of the graphene band structure are still needed. In this work, we conducted surface engineering of graphene through heterofunctional supramolecular-covalent scaffolds based on vinylsulfonated-polyamines (PA-VS). In these scaffolds, one side binds graphene through multivalent π-π interactions with pyrene groups, and the other side presents vinylsulfonated pending groups that can be used for covalent binding. The construction of PA-VS scaffolds was demonstrated by spectroscopic ellipsometry, Raman spectroscopy, and contact angle measurements. The covalent binding of -SH, -NH₂, or -OH groups was confirmed, and it evidenced great chemical versatility. After field-effect studies, we found that the PA-VS-based scaffolds do not disrupt the semiconducting properties of graphene. Moreover, the scaffolds were covalently modified with poly(ethylene glycol) (PEG), which improved the resistance to nonspecific proteins by almost 7-fold compared to the widely used PEG-monopyrene approach. The attachment of recognition elements to PA-VS was optimized for concanavalin A (ConA), a model lectin with a high affinity to glycans. Lastly, the platform was implemented for the rapid, sensitive, and regenerable recognition of SARS-CoV-2 spike protein and human ferritin in lab-made samples. Those two are the target molecules of major importance for the rapid detection and monitoring of COVID-19-positive patients. For that purpose, monoclonal antibodies (mAbs) were bound to the scaffolds, resulting in a surface coverage of 436 ± 30 ng/cm². K_D affinity constants of 48.4 and 2.54 nM were obtained by surface plasmon resonance (SPR) spectroscopy for SARS-CoV-2 spike protein and human ferritin binding on these supramolecular scaffolds, respectively.

Graphite Conjugation of a Macrocyclic Cobalt Complex Enhances Nitrite Electroreduction to Ammonia

This work reports on the generation of a graphite-conjugated diimine macrocyclic Co catalyst (GCC-CoDIM) that is assembled at o-quinone edge defects on graphitic carbon electrodes. X-ray photoelectron spectroscopy and X-ray absorption spectroscopy confirm the existence of a new Co surface species with a coordination environment that is the same as that of the molecular analogue, [Co(DIM)Br₂]⁺. GCC-CoDIM selectively reduces nitrite to ammonium with quantitative Faradaic efficiency and at a rate that approaches enzymatic catalysis. Preliminary mechanistic investigations suggest that the increased rate is accompanied by a change in mechanism from the molecular analogue. These results provide a template for creating macrocycle-based electrocatalysts based on first-row transition metals conjugated to an extreme redox-active ligand.

Faradaic effects in electrochemically gated graphene sensors in the presence of redox active molecules

Field-effect transistors (FETs) based on graphene are promising devices for the direct sensing of a range of analytes in solution. We show here that the presence of redox active molecules in the analyte solution leads to the occurrence of heterogeneous electron transfer with graphene generating a Faradaic current (electron transfer) in a FET configuration resulting in shifts of the Dirac point. Such a shift occurs if the Faradaic current is significantly high, e.g. due to a large graphene area. Furthermore, the redox shift based on the Faradaic current, reminiscent of a doping-like effect, is found to be non-Nernstian and dependent on parameters known from electrode kinetics in potentiodynamic methods, such as the electrode area, the standard potential of the redox probes and the scan rate of the gate voltage modulation. This behavior clearly differentiates this effect from other transduction mechanisms based on electrostatic interactions or molecular charge transfer doping effects, which are usually behind a shift of the Dirac point. These observations suggest that large-area unmodified/pristine graphene in field-effect sensors behaves as a non-polarized electrode in liquid. Strategies for ensuring a polarized interface are discussed.

Recent advances in graphene monolayers growth and their biological applications: A review

Development of two-dimensional high-quality graphene monolayers has recently received great concern owing to their enormous applications in diverging fields including electronics, photonics, composite materials, paints and coatings, energy harvesting and storage, sensors and metrology, and biotechnology. As a result, various groups have successfully developed graphene layers on different substrates by using the chemical vapor deposition method and explored their physical properties. In this direction, we have focused on the state-of-the-art developments in the growth of graphene layers, and their functional applications in biotechnology. The review starts with the introduction, which contains outlines about the graphene and their basic characteristics. A brief history and inherent applications of graphene layers followed by recent developments in growth and properties are described. Then, the application of graphene layers in biodevices is reviewed. Finally, the review is summarized with perspectives and future challenges along with the scope for future technological applications.

Formation of Highly Ordered Self-Assembled Monolayers on Two-Dimensional Materials via Noncovalent Functionalization

Functionalized two-dimensional materials (2DMs) are attracting much attention due to their promising applications in nanoscale devices. Producing continuous and homogeneous surface assemblies with a high degree of order has been challenging. In this work, we demonstrate that by noncovalently self-assembling molecular platforms on 2DMs, high-quality and highly ordered monolayers can be generated. The high degree of order and uniformity of the self-assembled monolayer layers were confirmed by a variety of analytic techniques including time-of-flight secondary ion mass spectrometry, scanning tunnelling microscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. Furthermore, by selectively enhancing the molecular vibrations of the molecular platform, via a combination of graphene-enhanced Raman spectroscopy (GERS) and surface-enhanced Raman spectroscopy (SERS), we were able to determine the orientation of self-assembled molecular platforms with respect to the surface normal. The selective enhancement of the vibrational modes occurs by taking advantage of the distance dependence of the Raman enhancement either by the graphene surface (GERS) or the silver nanoparticules (SERS) that are located on top of the self-assembled monolayer.

Palladium catalysed C-H arylation of pyrenes: access to a new class of exfoliating agents for water-based graphene dispersions

A new and diverse family of pyrene derivatives was synthesised via palladium-catalysed C-H ortho-arylation of pyrene-1-carboxylic acid. The strategy affords easy access to a broad scope of 2-substituted and 1,2-disubstituted pyrenes. The C1-substituent can be easily transformed into carboxylic acid, iodide, alkynyl, aryl or alkyl functionalities. This approach gives access to arylated pyrene ammonium salts, which outperformed their non-arylated parent compound during aqueous Liquid Phase Exfoliation (LPE) of graphite and compare favourably to state-of-the-art sodium pyrene-1-sulfonate PS1. This allowed the production of concentrated and stable suspensions of graphene flakes in water.

Synthesis and photophysics of new pyridyl end-capped 3D-dithia[3.3]paracyclophane-based Janus tectons: surface-confined self-assembly of their model pedestal on HOPG

Once synthesized, these new tectons demonstrated both ionic and coordination bonding. Surprisingly, P forms a quasi-square self-assembly independently of the underlying HOPG lattice.

Effect of Stacking Interactions on the Translation of Structurally Related Bis(thiosemicarbazonato)nickel(II) HER Catalysts to Modified Electrode Surfaces

A series of crystalline nickel(II) complexes (1-3) based on inexpensive bis(thiosemicarbazone) ligands diacetylbis(4-methyl-3-thiosemicarbazone) (H₂ATSM), diacetylbis(4,4-dimethyl-3-thiosemicarbazone) (H₂ATSDM), and diacetylbis[4-(2,2,2-trifluoroethyl)-3-thiosemicarbazone] (H₂ATSM-F₆) were synthesized and characterized by single-crystal X-ray diffraction and NMR, UV-visible, and Fourier transform infrared spectroscopies. Modified electrodes GC-1-GC-3 were prepared with films of 1-3 deposited on glassy carbon and evaluated as potential hydrogen evolution reaction (HER) catalysts. HER studies in 0.5 M aqueous H₂SO₄ (10 mA cm^-2) revealed dramatic shifts in the overpotential from 0.740 to 0.450 V after extended cycling for 1 and 2. The charge-transfer resistances for GC-1-GC-3 were determined to be 270, 160, and 630 Ω, respectively. Characterization of the modified surfaces for GC-1 and GC-2 by scanning electron microscopy and Raman spectroscopy revealed similar crystalline coatings before HER that changed to surface-modified crystallites after conditioning. The surface of GC-3 had an initial glasslike appearance before HER that delaminated after HER. The differences in the surface morphology and the effect of conditioning are correlated with crystal-packing effects. Complexes 1 and 2 pack as columns of interacting complexes in the crystallographic a direction with short interplanar spacings between 3.37 and 3.54 Å. Complex 3 packs as columns of isolated molecules in the crystallographic b direction with long-range interplanar spacings of 9.40 Å.

Multidentate Anchors for Surface Functionalization

The bottom-up functionalization of solid surfaces shows increasing importance for a wide range of interdisciplinary applications. Multidentate anchors with more than two contact points can bind to solid surfaces with strong chemisorption, well-defined upright configuration, and tailored functionality. The surface functionalization using multidentate anchors with three (tripodal), four (quadripodal), or more binding points is summarized herein, with a focus on those beyond classical tripodal anchors. In particular, the molecular design on how to achieve multisite interaction between anchor and substrate and the introduction of functional groups to thin films are discussed.

Dual-Tweezer Behavior of an Octapodal Pyrene Porphyrin-Based System as a Host for Fullerenes

The incorporation of eight pyrene units in a single porphyrin core exhibits a great synergistic effect, resulting in high affinity toward C₆₀ and C₇₀. This octapyrene porphyrin is easily accessible by a straightforward two-step synthetic approach that involves an octuple Suzuki reaction. The new supramolecular platform can present single- or double-tweezer fullerene hosting behavior. The switch from double- to single-tweezer behavior is triggered by the simple coordination of Zn²⁺ to the porphyrin. Both the octapyrene porphyrin 2HPOP and its zinc metalloporphyrin analogue ZnPOP show very high affinity for C₆₀ and C₇₀, while simultaneously allowing the discrimination of C₇₀ over C₆₀ in a C₆₀/C₇₀ mixture. The use of 2HPOP and ZnPOP for the enrichment of real fullerene mixtures is also demonstrated.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Carbon Nanotube Chemical Sensors

Carbon nanotubes (CNTs) promise to advance a number of real-world technologies. Of these applications, they are particularly attractive for uses in chemical sensors for environmental and health monitoring. However, chemical sensors based on CNTs are often lacking in selectivity, and the elucidation of their sensing mechanisms remains challenging. This review is a comprehensive description of the parameters that give rise to the sensing capabilities of CNT-based sensors and the application of CNT-based devices in chemical sensing. This review begins with the discussion of the sensing mechanisms in CNT-based devices, the chemical methods of CNT functionalization, architectures of sensors, performance parameters, and theoretical models used to describe CNT sensors. It then discusses the expansive applications of CNT-based sensors to multiple areas including environmental monitoring, food and agriculture applications, biological sensors, and national security. The discussion of each analyte focuses on the strategies used to impart selectivity and the molecular interactions between the selector and the analyte. Finally, the review concludes with a brief outlook over future developments in the field of chemical sensors and their prospects for commercialization.

Modulating Electrocatalysis on Graphene Heterostructures: Physically Impermeable Yet Electronically Transparent Electrodes

The electronic properties and extreme thinness of graphene make it an attractive platform for exploring electrochemical interactions across dissimilar environments. Here, we report on the systematic tuning of the electrocatalytic activity toward the oxygen reduction reaction (ORR) via heterostructures formed by graphene modified with a metal underlayer and an adlayer consisting of a molecular catalyst. Systematic voltammetric testing and electrochemical imaging of patterned electrodes allowed us to confidently probe modifications on the ORR mechanisms and overpotential. We found that the surface configuration largely determined the ORR mechanism, with adlayers of porphyrin molecular catalysts displaying a higher activity for the 2e^- pathway than the bare basal plane of graphene. Surprisingly, however, the underlayer material contributed substantially to lower the activation potential for the ORR in the order Pt > Au > SiO _x, strongly suggesting the involvement of the solution-excluded metal on the reaction. Computational investigations suggest that ORR enhancements originate from permeation of metal d-subshell electrons through the graphene layer. In addition, these physically impermeable but electronically transparent electrodes displayed tolerance to cyanide poisoning and stability toward long-term cycling, highlighting graphene as an effective protection layer of noble metal while enabling electrochemical interactions. This work has implications in the mechanistic understanding of 2D materials and core-shell-type heterostructures for electrocatalytic reactions.

Standing, lying, and sitting: translating building principles of the cell membrane to synthetic 2D material interfaces

Lessons can be drawn from cell membranes in controlling noncovalent functionalization of 2D materials to optimize interactions with the environment.

Controlling the Molecular Direction of Dinuclear Ruthenium Complexes on HOPG Surface through Noncovalent Bonding

We synthesized three types of binuclear Ru complexes (1-3) that contain pyrene anchors for the adsorption of 1-3 onto nanocarbon materials via noncovalent π-π interactions, in order to investigate their adsorption onto and their desorption from highly ordered pyrolytic graphite (HOPG). The adsorption saturation for 1 (6.22 pmol/cm²), 2 (2.83 pmol/cm²), and 3 (3.53 pmol/cm²) on HOPG was obtained from Langmuir isotherms. The desorption rate from HOPG electrodes decreased in the order 3 (2.4 × 10^-5 s^-1) > 2 (1.4 × 10^-5 s^-1) ≫ 1 (1.8 × 10^-6 s^-1). These results indicate that the number of pyrene anchors and their position of substitution in such complexes strongly affect the desorption behavior. However, neither the free energy of adsorption (ΔG_ads) nor the heterogeneous electron-transfer rate (k_ET) showed any significant differences among 1-3, albeit that the surface morphologies of the modified HOPG substrates showed domain structures that were characteristic for each Ru complex. In the case of 3, the average height changed from ∼2 to ∼4 nm upon increasing the concentration of the solution of 3 that was used for the surface modification. In contrast, the height for 1 and 2 remained constant (1.5-2 nm) upon increasing the concentration of the complexes in the corresponding solutions. While the molecular orientation of the Ru-Ru axis of 3 relative to the HOPG surface normal changed from parallel to perpendicular, the Ru-Ru axis in 1 and 2 remained parallel, which leads to an increased stability of 1 and 2.

Size Regulation and Stability Enhancement of Pt Nanoparticle Catalyst via Polypyrrole Functionalization of Carbon-Nanotube-Supported Pt Tetranuclear Complex

A novel multiwall carbon nanotube (MWCNT) and polypyrrole (PPy) composite was found to be useful for preparing durable Pt nanoparticle catalysts of highly regulated sizes. A new pyrene-functionalized Pt₄ complex was attached to the MWCNT surface which was functionalized with PPy matrix to yield Pt₄ complex/PPy/MWCNT composites without decomposition of the Pt₄ complex units. The attached Pt₄ complexes in the composite were transformed into Pt⁰ nanoparticles with sizes of 1.0-1.3 nm at a Pt loading range of 2 to 4 wt %. The Pt nanoparticles in the composites were found to be active and durable catalysts for the N-alkylation of aniline with benzyl alcohol. In particular, the Pt nanoparticles with PPy matrix exhibited high catalyst durability in up to four repetitions of the catalyst recycling experiment compared with nonsize-regulated Pt nanoparticles prepared without PPy matrix. These results demonstrate that the PPy matrix act to regulate the size of Pt nanoparticles, and the PPy matrix also offers stability for repeated usage for Pt nanoparticle catalysis.

Spatial and Lateral Control of Functionality by Rigid Molecular Platforms

Surface mounted molecular devices have received significant attention in the scientific community because of their unique ability to construct functional materials. The key involves the platform on which the molecular device works on solid substrates, such as in solid-liquid or solid-vacuum interfaces. Here, we outline the concept of rigid molecular platforms to immobilize active functionality atop flat surfaces in a controllable manner. Most of these (multipodal) platforms have at least three anchoring groups to control the spatial arrangement of the protruding functional moieties and form mechanically stable and electronically tuned contacts to the underlying substrate. Another approach is based on employing of flat aromatic scaffolds bearing perpendicular functionalities that form stable lateral assemblies on various surfaces. Emphasis is placed on the need for controllable assembly and separation of these tailor-made molecules that expose functionalities at the molecular scale. The discussions are focused on the different molecular designs realizing functional 3D architectures on surfaces, the role of various anchoring strategies to control the spatial arrangement, and structural considerations controlling physical features like the coupling to the surface or the available space for sterically demanding molecular operations.

Spongelike Porous Silica Nanosheets: From "Soft" Molecular Trapping to DNA Delivery

Spongelike porous silica nanosheets, with nanometer thicknesses and pores whose diameters are on the hundreds-of-nanometers scale, have been used as a novel carrier for molecular immobilization of different guests. Enhanced properties of encapsulation were shown for drug molecules of different dimensions due to "softness" caused by the specific nanometric features of the porous structure. The encapsulating effect of the structure results in sustained and stimuli-responsive release behavior of immobilized guest molecules. By studying the adsorption process of DNA molecules on spongelike porous nanosheets or on solid nanoparticles by use of a quartz crystal microbalance, we show that better elasticity of surfaces of the porous nanosheets over that of solid nanoparticles can improve the immobilization of guest molecules. The coating of porous silica nanosheets onto various substrates was also found to effectively mediate DNA delivery to mammalian cells.

Non-covalent graphene nanobuds from mono- and tripodal binding motifs

Dispersion forces govern the interaction of graphene with mono- and tripodal pyrene–[60]fullerene derivatives and direct the formation of graphene nanobuds.

Noncovalent immobilization and surface characterization of lanthanide complexes on carbon electrodes

Surface immobilization and spectroscopic characterization of redox-active molecular lanthanide complexes is demonstrated on carbon electrodes.

Exfoliation and supramolecular functionalization of graphene with an electron donor perylenediimide derivative

Exfoliation of graphene with 1-N-methylpiperazine-perylenediimide (Pip-PDI) and supramolecular formation of Pip-PDI/graphene ensembles.

Molecular dynamics simulations of solvent-exfoliation and stabilization of graphene with the assistance of compressed carbon dioxide and pyrene–polyethylene glycol

Understanding the solvent-exfoliation and stabilization of graphene with cpCO₂and pyrene–polyethylene glycol from molecular dynamics simulations.

A novel aptameric biosensor based on the self-assembled DNA-WS2 nanosheet architecture

It has been reported that tungsten disulfide (WS₂) can bind single-stranded DNA (ssDNA) with high affinity while it has less affinity toward double stranded DNA (dsDNA). In this work, for the first time, the high affinity between WS₂ and ssDNA was used to construct stable sensing interface for ATP detection. A DNA sequence with -SH at one end was first immobilized on Au electrode. WS₂ nanosheets were immobilized on the SH-DNA/Au electrode surface due to the strong affinity between WS₂ and ssDNA. Then the WS₂ nanosheets were used to immobilize ATP binding aptamer (ABA) through the high affinity between WS₂ and ssDNA, too. When ATP reacts with the ABA aptamer, duplex will be formed and dissociated from the WS₂ nanosheets. On the basis of this, an electrochemical aptasensor for ATP was fabricated. This ATP sensor showed high sensitivity, selectivity and stability due to the unique WS₂-ssDNA interactions and the specific aptamer-target recognition. Furthermore, this strategy was generalized to detect Hg²⁺ using a mercury-specific aptamer (MSO). This strategy can be expected to offer a promising approach for designing high-performance electrochemical aptasensors for a spectrum of targets.

Graphene Oxide Nanosheets Stimulate Ruffling and Shedding of Mammalian Cell Plasma Membranes

Graphene oxide (GO) has attracted intense interest for use in living systems and environmental applications. GO's compatibility with mammalian cells is sometimes inferred from its low cytotoxicity, but such conclusions ignore non-lethal effects that will influence GO's utility. Here we demonstrate, with rat basophilic leukemia (RBL) cells, profound plasma membrane (PM) ruffling and shedding induced by GO using confocal and live cell fluorescence microscopy, as well as scanning electron microscopy. These membrane structures contain immunoglobulin E receptors, are resistant to detergents, and lack detectable fluorescence labeling of F-actin and fibronectin. The formation of these membrane structures correlates with a loss of contact inhibition between RBL cells. We observe similar cellular responses towards GO for NIH-3T3 fibroblast cells and MDA-MB-231 human breast cancer cells. These findings reveal a previously unreported cellular response towards foreign nanomaterials. Membrane ruffling and shedding raise fundamental questions about how GO interacts with the PM, as well as its potential to modulate cellular mechanosensing for tissue engineering, stem cell differentiation, and other biomedical applications.

Controlling the Direction of the Molecular Axis of Rod-Shaped Binuclear Ruthenium Complexes on Single-Walled Carbon Nanotubes

We report the synthesis of a mixed-valence ruthenium complex, bearing pyrene moieties on one side of the ligands as anchor groups. Composites consisting of mixed-valence ruthenium complexes and SWNTs were prepared by noncovalent π-π interactions between the SWNT surface and the pyrene anchors of the Ru complex. In these composites, the long axis of the Ru complexes was aligned in parallel to the principal direction of the SWNT. The optimized conformation of these complexes on the SWNT surface was calculated by molecular mechanics. The composites were examined by UV/Vis absorption and FT-IR spectroscopy, XPS, and SEM analysis. Furthermore, their electrochemical properties were evaluated. Cyclic voltammograms of the composites showed reversible oxidation waves at peak oxidation potentials (Epox ) = 0.86 and 1.08 V versus Fc(+) /Fc, which were assigned to the Ru(II) -Ru(II) /Ru(II) -Ru(III) and the Ru(II) -Ru(III) /Ru(III) -Ru(III) oxidation events of the dinuclear ruthenium complex, respectively. Based on these observations, we concluded that the electrochemical properties and mixed-valence state of the dinuclear ruthenium complexes were preserved upon attachment to the SWNT surface.