Heavier Alkaline Earth Catalysts for the Intermolecular Hydroamination of Vinylarenes, Dienes, and Alkynes

Fluorenyl-tethered N-heterocyclic carbene (NHC): an exclusive C-donor ligand for heteroleptic calcium and strontium chemistry

Exclusive C-donating ligands are rarely used with kinetically labile heavier alkaline earths (Ca, Sr, Ba). We report herein the aptitude of a combination of NHC with fluorenyl connected by a flexible -(CH2)2- linker as a ligand support for heteroleptic Ca- and Sr-N(SiMe3)2 and iodides. The Ca-N(SiMe3)2 complex even catalyzes the intramolecular hydroamination of aminoalkenes to showcase the effectiveness of this ligand framework.

Advances in heavy alkaline earth chemistry provide insight into complexation of weakly polarizing Ra2+, Ba2+, and Sr2+ cations

Numerous technologies-with catalytic, therapeutic, and diagnostic applications-would benefit from improved chelation strategies for heavy alkaline earth elements: Ra2+, Ba2+, and Sr2+. Unfortunately, chelating these metals is challenging because of their large size and weak polarizing power. We found 18-crown-6-tetracarboxylic acid (H4COCO) bound Ra2+, Ba2+, and Sr2+ to form M(HxCOCO)x-2. Upon isolating radioactive 223Ra from its parent radionuclides (227Ac and 227Th), 223Ra2+ reacted with the fully deprotonated COCO4- chelator to generate Ra(COCO)2-(aq) (log KRa(COCO)2- = 5.97 ± 0.01), a rare example of a molecular radium complex. Comparative analyses with Sr2+ and Ba2+ congeners informed on what attributes engendered success in heavy alkaline earth complexation. Chelators with high negative charge [-4 for Ra(COCO)2-(aq)] and many donor atoms [≥11 in Ra(COCO)2-(aq)] provided a framework for stable complex formation. These conditions achieved steric saturation and overcame the weak polarization powers associated with these large dicationic metals.

Catalytic Synthesis of β-(Hetero)arylethylamines: Modern Strategies and Advances

β-(Hetero)arylethylamines appear in a myriad of pharmaceuticals due to their broad spectrum of biological properties, making them prime candidates for drug discovery. Conventional methods for their preparation often require engineered substrates that limit the flexibility of the synthetic routes and the diversity of compounds that can be accessed. Consequently, methods that provide rapid and versatile access to those scaffolds remain limited. To overcome these challenges, synthetic chemists have designed innovative and modular strategies to access the β-(hetero)arylethylamine motif, paving the way for their more extensive use in future pharmaceuticals. This review outlines recent progresses in the synthesis of (hetero)arylethylamines and emphasizes how these innovations have enabled new levels of molecular complexity, selectivity, and practicality.

Anti-Markovnikov Intermolecular Hydroamination of Alkenes and Alkynes: A Mechanistic View

Hydroamination, the addition of an N-H bond across a C-C multiple bond, is a reaction with a great synthetic potential. Important advances have been made in the last decades concerning catalysis of these reactions. However, controlling the regioselectivity in the amine addition toward the formation of anti-Markovnikov products (addition to the less substituted carbon) still remains a challenge, particularly in intermolecular hydroaminations of alkenes and alkynes. The goal of this review is to collect the systems in which intermolecular hydroamination of terminal alkynes and alkenes with anti-Markovnikov regioselectivity has been achieved. The focus will be placed on the mechanistic aspects of such reactions, to discern the step at which regioselectivity is decided and to unravel the factors that favor the anti-Markovnikov regioselectivity. In addition to the processes entailing direct addition of the amine to the C-C multiple bond, alternative pathways, involving several reactions to accomplish anti-Markovnikov regioselectivity (formal hydroamination processes), will also be discussed in this review. The catalysts gathered embrace most of the metal groups of the Periodic Table. Finally, a section discussing radical-mediated and metal-free approaches, as well as heterogeneous catalyzed processes, is also included.

Highly regioselective and diastereoselective synthesis of novel pyrazinoindolones via a base-mediated Ugi-N-alkylation sequence

An efficient base-mediated/metal-free approach has been developed for the synthesis of 1-oxo-1,2,3,4-tetrahydropyrazino[1,2-a]indole-3-carboxamide derivatives via intramolecular indole N-H alkylation of novel bis-amide Ugi-adducts. In this protocol the Ugi reaction of (E)-cinnamaldehyde derivatives, 2-chloroaniline, indole-2-carboxylic acid and different isocyanides was designed for the preparation of bis-amides. The main highlight of this study is the practical and highly regioselective preparation of new polycyclic functionalized pyrazino derivatives. This system is facilitated by Na₂CO₃ mediation in DMSO and 100 °C conditions.

Synthesis, characterisation and reactivity of group 2 complexes with a thiopyridyl scorpionate ligand

Herein we report the reactivity of the proligand tris(2-pyridylthio)methane (HTptm) with various Alkaline Earth (AE) reagents: (1) dialkylmagnesium reagents and (2) AE bis-amides (AE = Mg-Ba). Heteroleptic complexes of general formulae [Mg(Tptm)(R)] (R = Me, ⁿBu; Tptm = {C(S-C₅H₄N)₃}^-) and [AE(Tptm)(N'')] (AE = Mg-Ba; N'' = {N(SiMe₃)₂}^-) were targeted from the reaction of HTptm with R₂Mg or [AE(N'')₂]₂. Reaction of the proligand with dialkylmagnesium reagents led to formation of [{Mg(κ³C,N,N-C{Bu}{S-C₅H₄N}₂)(μ-S-C₅H₄N)}₂] (1) and [{Mg(κ³C,N,N-C{Me}{S-C₅H₄N}₂)(μ-OSiMe₃)}₂] (2) respectively, as a result of a novel transfer of an alkyl group onto the methanide carbon with concomitant C-S bond cleavage. However, reactivity of bis-amide precursors for Mg and Ca did afford the target species [AE(Tptm)(N'')] (3-AE; AE = Mg-Ca), although these proved susceptible to ligand degradation processes. DFT calculations show that alkyl transfer in the putative [Mg(Tptm)(ⁿBu)] (1m') system and amide transfer in 3-Ca is a facile process that induces C-S bond cleavage in the Tptm ligand. 3-Mg and 3-Ca were also tested as catalysts for the hydrophosphination of selected alkenes and alkynes, including the first example of mono-hydrophosphination of 4-ethynylpyridine which was achieved with high conversions and excellent regio- and stereochemical control.

Palladium-Catalyzed Asymmetric Sequential Hydroamination of 1,3-Enynes: Enantioselective Syntheses of Chiral Imidazolidinones

Pd-catalyzed sequential hydroamination of readily available 1,3-enynes is reported. The redox-neutral process provides an efficient route to synthesize a broad scope of imidazolidinones, thiadiazolidines, and imidazolidines. Asymmetric sequential hydroamination generates a series of synthetically valuable, enantioenriched imidazolidinones. Mechanistic studies revealed that the transformation occurred via an intermolecular enyne hydroamination pathway to give an allene intermediate. Subsequent intramolecular hydroamination of the allene intermediate proceeded under the Curtin-Hammett principle to provide enantioenriched imidazolidinone products.

N-Heterocyclic Carbene-Coordinated M(II) (M = Yb, Sm, Ca) Bisamides: Expanding the Limits of Intermolecular Alkene Hydrophosphination

A series of NHC-stabilized amido compounds (NHC)_nM[N(SiMe₃)₂]₂ (M = Yb(II), Sm(II), Ca(II); n = 1, 2) showed remarkable catalytic efficiency in addition of PhPH₂ and PH₃ to alkenes under mild conditions and low catalyst loading. The effect of σ-donor capacity of NHCs on catalytic activity in hydrophosphination of styrene with PhPH₂ and PH₃ was revealed. For the series of three-coordinate complexes 1-4M, a tendency to increase the catalytic activity with growth of σ-donating strength of the carbene ligand was clearly demonstrated. The complex (NHC)₂Sm[N(SiMe₃)₂]₂ (NHC = 1,3-diisopropyl-2H-imidazole-2-ylidene) (5Sm) proved to be the most efficient catalyst, which enabled hardly realizable transformations such as PhPH₂ addition across internal C═C bonds of norbornene and cis- and trans-stilbenes, providing the highest reaction rate for addition of PH₃ to styrene. Excellent regio- and chemoselectivities of alkylation of PH₃ with styrenes allow for a selective and good-yield synthesis of desired organophosphines─either primary, secondary, or tertiary. Stepwise alkylation of PH₃ with various substituted styrenes can be efficiently applied as an approach to nonsymmetric secondary phosphines. The rate equation of the addition of styrene to PH₃ promoted by 5Sm was found: rate = k[styrene]¹[5Sm]¹.

Mechanistic Studies Yield Improved Protocols for Base-Catalyzed Anti-Markovnikov Alcohol Addition Reactions

The catalytic anti-Markovnikov addition of alcohols to simple alkenes is a longstanding synthetic challenge. We recently disclosed the use of organic superbase catalysis for the nucleophilic addition of alcohols to activated styrene derivatives. This article describes mechanistic studies on this reversible reaction, including thermodynamic and kinetic profiling as well as computational modeling. Our findings show the negative entropy of addition is counterbalanced by an enthalpy that is most favored in nonpolar solvents. However, a large negative alcohol rate order under these conditions indicates excess alcohol sequesters the active alkoxide ion pairs, slowing the reaction rate. These observations led to an unexpected solution to a thermodynamically challenging reaction: use of less alcohol enables faster addition, which in turn allows for lower reaction temperatures to counteract Le Chatelier's principle. Thus, our original method has been improved with new protocols that do not require excess alcohol stoichiometry, enable an expanded alkene substrate scope, and allow for the use of more practical catalyst systems. The generality of this insight for other challenging hydroetherification reactions is also demonstrated through new alkenol cyclization and oxa-Michael addition reactions.

s-Block Metal Catalysts for the Hydroboration of Unsaturated Bonds

The addition of a B-H bond to an unsaturated bond (polarized or unpolarized) is a powerful and atom-economic tool for the synthesis of organoboranes. In recent years, s-block organometallics have appeared as alternative catalysts to transition-metal complexes, which traditionally catalyze the hydroboration of unsaturated bonds. Because of the recent and rapid development in the field of hydroboration of unsaturated bonds catalyzed by alkali (Li, Na, K) and alkaline earth (Mg, Ca, Sr, Ba) metals, we provide a detailed and updated comprehensive review that covers the synthesis, reactivity, and application of s-block metal catalysts in the hydroboration of polarized as well as unsaturated carbon-carbon bonds. Moreover, we describe the main reaction mechanisms, providing valuable insight into the reactivity of the s-block metal catalysts. Finally, we compare these s-block metal complexes with other redox-neutral catalytic systems based on p-block metals including aluminum complexes and f-block metal complexes of lanthanides and early actinides. In this review, we aim to provide a comprehensive, authoritative, and critical assessment of the state of the art within this highly interesting research area.

THF-solvated Heavy Alkali Metal Benzyl Compounds (Na, Rb, Cs): Defined Deprotonation Reagents for Alkali Metal Mediation Chemistry

The incorporation of heavy alkali metals into substrates is both challenging and essential for many reactions. Here, we report the formation of THF-solvated alkali metal benzyl compounds [PhCH2 M ⋅ (thf)n ] (M=Na, Rb, Cs). The synthesis was carried out by deprotonation of toluene with the bimetallic mixture n-butyllithium/alkali metal tert-butoxide and selective crystallization from THF of the defined benzyl compounds. Insights into the molecular structure in the solid as well as in solution state are gained by single crystal X-ray experiments and NMR spectroscopic studies. The compounds could be successfully used as alkali metal mediating reagents. The example of caesium showed the convenient use by deprotonating acidic C-H as well as N-H compounds to gain insight into the aminometalation using these reagents.

Synthesis of Arylethylamines via C(sp3)-C(sp3) Palladium-Catalyzed Cross-Coupling

Substituted arylethylamines represent a key structural motif in natural, pharmaceutical, and agrochemical compounds. Access to such scaffolds has been the subject of long-standing synthetic interest. Herein, we report the synthesis of such scaffolds via a palladium-catalyzed C(sp³)-C(sp³) coupling between (chloromethyl)aryls and air-/moisture-stable N,N-dialkylaminomethyltrifluoroborate salts. Rapid hit identification was achieved using microscale high-throughput experimentation and was followed by millimolar-scale reaction parameter optimization. A range of structurally and electronically varied arylethylamine products were obtained in moderate to excellent yields (27-96%, >60 examples). The reaction mechanism is proposed to proceed via formation of a trialkylbenzylammonium species prior to oxidative addition.

Main group bimetallic partnerships for cooperative catalysis

Over the past decade s-block metal catalysis has undergone a transformation from being an esoteric curiosity to a well-established and consolidated field towards sustainable synthesis. Earth-abundant metals such as Ca, Mg, and Al have shown eye-opening catalytic performances in key catalytic processes such as hydrosilylation, hydroamination or alkene polymerization. In parallel to these studies, s-block mixed-metal reagents have also been attracting widespread interest from scientists. These bimetallic reagents effect many cornerstone organic transformations, often providing enhanced reactivities and better chemo- and regioselectivities than conventional monometallic reagents. Despite a significant number of synthetic advances to date, most efforts have focused primarily on stoichiometric transformations. Merging these two exciting areas of research, this Perspective Article provides an overview on the emerging concept of s/p-block cooperative catalysis. Showcasing recent contributions from several research groups across the world, the untapped potential that these systems can offer in catalytic transformations is discussed with special emphasis placed on how synergistic effects can operate and the special roles played by each metal in these transformations. Advancing the understanding of the ground rules of s-block cooperative catalysis, the application of these bimetalic systems in a critical selection of catalytic transformations encompassing hydroamination, cyclisation, hydroboration to C-C bond forming processes are presented as well as their uses in important polymerization reactions.

Alkaline-earth complexes with macrocyclic-functionalised bis(phenolate)s and bis(fluoroalkoxide)s

The synthesis and structural features of several families of unsolvated molecular complexes of the heavy alkaline earths (Ae = calcium, strontium and barium) supported by bis(phenolate)s or bis(fluoroalkoxide)s are described. These dianionic, multidentate ligands are built around diaza-macrocycles that contain either five or six N- and O-heteroatoms. Several of these complexes have been characterised by X-ray diffraction crystallography. A list of comparative features was drawn upon close examination of the molecular structures of these complexes. It highlights the subtle influences of the identity of the central Ae metal, denticity and nature -fluoroalkoxide vs. phenolate- of the anionic tethers in the ligands. All complexes are seven- or eight-coordinate. It is observed in particular that a decrease of the number of heteroatoms in the macrocyclic backbone of the ligand will be compensated by the establishment of intramolecular AeF interactions (accounting for ca. 3.8-6.4% of the pertaining coordination spheres according to bond valence sum analysis), dimerisation of the complex, or, in one case, solvent (thf) retention. Attempts to gauge the Lewis acidity in these series of complexes were carried out by three independent methods (Childs, Gutmann-Beckett and global electrophilicity index). However, conflicting results were obtained and no clear trend can be delineated, even if on the whole, these measurements concur to suggest relatively low Lewis acidity.

Reactivity of a Molecular Calcium Hydride Cation ([CaH]+) Supported by an NNNN Macrocycle

The hydride ligand in the cationic calcium hydride supported by a NNNN-type macrocycle, [(Me₄TACD)₂Ca₂(μ-H)₂(THF)][BAr₄]₂ (1; Me₄TACD = 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecane; THF = tetrahydrofuran; BAr₄ = B(C₆H₃-3,5-Me₂)₄), shows, in addition to its Brönsted basicity toward weak acids, a pronounced nucleophilicity resulting in nucleophilic substitution or insertion (addition) at a silicon or sp² carbon center. Terminal acetylenes RC≡CH (R = SiMe₃, cyclopropyl) as well as 1,4-diphenylbutadiene were deprotonated by 1 to give dinuclear complexes [(Me₄TACD)₂Ca₂(μ-C≡CR)₂][BAr₄]₂ (2a, R = SiMe₃; 2b, R = cyclopropyl) and [(Me₄TACD)₂Ca₂(μ₂-η⁴-1,4-Ph₂C₄H₂)][BAr₄]₂ (3) with H₂ evolution. The addition reaction with BH₃(THF) gave a tetrahydridoborate complex, [(Me₄TACD)Ca(BH₄)(THF)₂][BAr₄] (4), with κ₂-H₂BH₂ coordination in the solid state, suggesting a pronounced Lewis acidic calcium center. The behavior resulting from both Lewis acidity and hydricity becomes apparent in the nucleophilic substitution of fluorobenzene by 1 to give benzene and the dimeric fluoride complex [(Me₄TACD)₂Ca₂(μ-F)₂(THF)][BAr₄]₂·2.5THF (5). Analogous nucleophilic substitution reaction is observed for heterofunctionalized organosilanes XSiR₃ [X = I, N(SiHMe₂)₂, N₃; R = Me₃ or HMe₂], which resulted in the formation of calcium complexes [(Me₄TACD)Ca(X)(THF)_n][BAr₄] (6-8) containing an X ligand along with hydrosilane HSiR₃. An insertion reaction by 1 was observed with CO₂ and CO to give dinuclear formato complex [(Me₄TACD)₂Ca₂(μ-OCHO)₂][BAr₄]₂ (9) and cis-enediolato complex [(Me₄TACD)₂Ca₂(μ-OCH═CHO)][BAr₄]₂·3.5THF (10), respectively. The latter is believed to have been formed as a result of the dimerization of an initially generated formyl or oxymethylene complex, [(Me₄TACD)Ca(OCH)]⁺.

Heavier Alkaline-Earth Catalyzed Dehydrocoupling of Silanes and Alcohols for the Synthesis of Metallo-Polysilylethers

The dehydrocoupling of silanes and alcohols mediated by heavier alkaline-earth catalysts, [Ae{N(SiMe₃ )₂ }₂ ⋅(THF)₂ ] (I-III) and [Ae{CH(SiMe₃ )₂ }₂ ⋅(THF)₂ ], (IV-VI) (Ae=Ca, Sr, Ba) is described. Primary, secondary, and tertiary alcohols were coupled to phenylsilane or diphenylsilane, whereas tertiary silanes are less tolerant towards bulky substrates. Some control over reaction selectivity towards mono-, di-, or tri-substituted silylether products was achieved through alteration of reaction stoichiometry, conditions, and catalyst. The ferrocenyl silylether, FeCp(C₅ H₄ SiPh(OBn)₂ ) (2), was prepared and fully characterized from the ferrocenylsilane, FeCp(C₅ H₄ SiPhH₂ ) (1), and benzyl alcohol using barium catalysis. Stoichiometric experiments suggested a reaction manifold involving the formation of Ae-alkoxide and hydride species, and a series of dimeric Ae-alkoxides [(Ph₃ CO)Ae(μ₂ -OCPh₃ )Ae(THF)] (3 a-c, Ae=Ca, Sr, Ba) were isolated and fully characterized. Mechanistic experiments suggested a complex reaction mechanism involving dimeric or polynuclear active species, whose kinetics are highly dependent on variables such as the identity and concentration of the precatalyst, silane, and alcohol. Turnover frequencies increase on descending Group 2 of the periodic table, with the barium precatalyst III displaying an apparent first-order dependence in both silane and alcohol, and an optimum catalyst loading of 3 mol % Ba, above which activity decreases. With precatalyst III in THF, ferrocene-containing poly- and oligosilylethers with ferrocene pendent to- (P1-P4) or as a constituent (P5, P6) of the main polymer chain were prepared from 1 or Fe(C₅ H₄ SiPhH₂ )₂ (4) with diols 1,4-(HOCH₂ )₂ -(C₆ H₄ ) and 1,4-(CH(CH₃ )OH)₂ -(C₆ H₄ ), respectively. The resultant materials were characterized by NMR spectroscopy, gel permeation chromatography (GPC) and DOSY NMR spectroscopy, with estimated molecular weights in excess of 20,000 Da for P1 and P4. The iron centers display reversible redox behavior and thermal analysis showed P1 and P5 to be promising precursors to magnetic ceramic materials.

Ln(ii) and Ca(ii) NCsp3N pincer type diarylmethanido complexes – promising catalysts for C–C and C–E (E = Si, P, N, S) bond formation

The first examples of Ln(ii) (Ln = Yb, Sm) and Ca [NC_sp3N] pincer type diarylmethanido complexes were synthesized and successfully used as efficient and selective precatalyst for intermolecular C–C and C–E bond formation.

Combined KH/alkaline-earth metal amide catalysts for hydrogenation of alkenes

Breaking saline KH: The combined KH/alkaline-earth metal amide catalysts display much better catalytic activity than their components in the hydrogenation of alkenes, suggesting the degradation and activation of saline KH with the metal amides.

Barium tetraalkylaluminate complexes supported by the super-bulky hydrotris(pyrazolyl)borate ligand

A heteroleptic barium aminobenzyl complex [(Tp^Ad,iPr)Ba(o-CH₂C₆H₄-NMe₂)] (1) was obtained in excellent yield from a simple one-pot reaction. Treatment of [(Tp^Ad,iPr)Ba(o-CH₂C₆H₄-NMe₂)] (1) with two equivalents of AlR₃ (R = Me, Et) led to the formation of barium tetraalkylaluminate complexes [(Tp^Ad,iPr)Ba(AlR₄)]_n (R = Me, n = 2, 2; R = Et, n = 1, 3) as dimers or monomers in the solid state. The Tp^Ad,iPr ligand-free peralkylated barium complex [Ba(AlEt₄)₂]_n was isolated by the addition of ten equivalents of AlEt₃ under the same conditions. The donor-induced aluminate cleavage is not applicable when donor solvents are added to complexes 2 and 3. In the solution of complexes 2 and 3, the alkylaluminate moieties and Tp^Ad,iPr ligands show a rapid fluxional behavior in [D₈]toluene solution over the temperature range of -70 to 25 °C, without any significant decoalescence of the corresponding proton signals.

Catalytic Amination of β-(Hetero)arylethyl Ethers by Phosphazene Base t-Bu-P4

We describe the catalytic amination of β-(hetero)arylethyl ethers with amines using the organic superbase t-Bu-P4 to obtain β-(hetero)arylethylamines. The reaction has a broad substrate scope and allows the transformations of electron-deficient and electron-neutral β-(hetero)arylethyl ethers with various amines including pyrrole, N-alkylaniline, diphenylamine, aniline, indole, and indoline derivatives. Mechanistic studies indicate a two-reaction pathway of MeOH elimination from the substrate to form a (hetero)arylalkene followed by the hydroamination of the alkene.

Stepwise Reduction at Magnesium and Beryllium: Cooperative Effects of Carbenes with Redox Non-Innocent α-Diimines

In the past two decades, the organometallic chemistry of the alkaline earth elements has experienced a renaissance due in part to developments in ligand stabilization strategies. In order to expand the scope of redox chemistry known for magnesium and beryllium, we have synthesized a set of reduced magnesium and beryllium complexes and compared their resulting structural and electronic properties. The carbene-coordinated alkaline earth-halides, (^Et2CAAC)MgBr₂ (1), (SIPr)MgBr₂ (2), (^Et2CAAC)BeCl₂ (3), and (SIPr)BeCl₂ (4) [^Et2CAAC = diethyl cyclic(alkyl)(amino) carbene; SIPr = 1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazole-2-ylidene] were combined with an α-diimine [2,2-bipyridine (bpy) or bis(2,6-diisopropylphenyl)-1,4-diazabutadiene (^DippDAB)] and the appropriate stoichiometric amount of potassium graphite to form singly- and doubly-reduced compounds (^Et2CAAC)MgBr(^DippDAB) (5), (^Et2CAAC)MgBr(bpy) (6), (^Et2CAAC)Mg(^DippDAB) (7), (^Et2CAAC)Be(bpy) (8), and (SIPr)Be(bpy) (9). The doubly-reduced compounds 7-9 exhibit substantial π-bonding interactions across the diimine core, metal center, and π-acidic carbene. Each complex was fully characterized by UV-vis, FT-IR, X-ray crystallography, ¹H, ¹³C, and ⁹Be NMR, or EPR where applicable. We use these compounds to highlight the differences in the organometallic chemistry of the lightest alkaline earth metals, magnesium and beryllium, in an otherwise identical chemical environment.

Preparation of Chiral Allenes through Pd-Catalyzed Intermolecular Hydroamination of Conjugated Enynes: Enantioselective Synthesis Enabled by Catalyst Design

In this study, we establish that conjugated enynes undergo selective 1,4-hydroamination under Pd catalysis to deliver chiral allenes with pendant allylic amines. Several primary and secondary aliphatic and aryl-substituted amines couple with a wide range of mono- and disubstituted enynes in a nonenantioselective reaction where DPEphos serves as the ligand for Pd. Benzophenone imine acts as an ammonia surrogate to afford primary amines in a two-step/one-pot process. Examination of chiral catalysts revealed a high degree of reversibility in the C-N bond formation that negatively impacted enantioselectivity. Consequently, an electron-poor ferrocenyl-PHOX ligand was developed to enable efficient and enantioselective enyne hydroamination.

Alkali metal and stoichiometric effects in intermolecular hydroamination catalysed by lithium, sodium and potassium magnesiates

Main group bimetallic complexes, while being increasingly used in stoichiometric deprotonation and metal-halogen exchange reactions, have not yet made a significant impact in catalytic applications. This paper explores the ability of alkali metal magnesiates to catalyse the intermolecular hydroamination of alkynes and alkenes using sytrene and diphenylacetylene as principle setting model substrates. By systematically studying the role of the alkali-metal and the formulation of the heterobimetallic precatalyst, this study establishes higher order potassium magnesiate [(PMDETA)₂K₂Mg(CH₂SiMe₃)₄] (7) as a highly effective system capable of catalysing hydroamination of styrene and diphenylacetylene with several amines while operating at room temperature. This high reactivity contrasts with the complete lack of catalytic ability of neutral Mg(CH₂SiMe₃)₂, even when harsher reaction conditions are employed (24 h, 80 °C). A pronounced alkali metal effect is also uncovered proving that the alkali metal (Li, Na, or K) is not a mere spectating counterion. Through stoichiometric reactions, and structural and spectroscopic (DOSY NMR) investigations we shed some light on the potential reaction pathway as well as the constitution of key intermediates. This work suggests that the enhanced catalytic activity of 7 can be rationalised in terms of the superior nucleophilic power of the formally dianionic magnesiate {Mg(NR₂)₄}^2- generated in situ during the hydroamination process, along with the ability of potassium to engage in π-interactions with the unsaturated organic substrate, enhancing its susceptibility towards a nucleophilic attack by the amide anion.

Stoichiometric reactions and catalytic dehydrogenations of amine–boranes with calcium aryloxide

A calcium aryloxide complex reacts with amine–boranes to give unprecedented amine–borane coordinated complexes through Ca⋯H interactions, which serve as active species for catalytic dehydrogenation reactions.

Barium complexes with crown-ether-functionalised amidinate and iminoanilide ligands for the hydrophosphination of vinylarenes

Two barium-amide complexes bearing crown-ether-functionalised amidinate and iminoanilide ligands that act as competent precatalysts for the intermolecular hydrophosphination of vinylarenes are presented.

Synthesis and catalytic activity of tridentate N-(2-pyridylethyl)-substituted bulky amidinates of calcium and strontium

Sterically protected tridentate amidinates of calcium have been prepared to study the intramolecular hydroamination of an aminoalkene.

Metal-catalyzed regiodivergent organic reactions

This review discusses metal-catalysed regiodivergent additions, allylic substitutions, CH-activation, cross-couplings and intra- or intermolecular cyclisations.

Copper-catalysed synthesis of alkylidene 2-pyrrolinone derivatives from the combination of α-keto amides and alkynes

A Cu(i)-catalysed addition and cyclisation sequence has been developed for the synthesis of (E)-alkylidene pyrrolinone derivatives. The reactions incorporate simple α-keto amides and alkynes as substrates, and employ a commercially available Cu(i) catalyst. The process tolerates good variation of both starting materials, and delivers the desired pyrrolinones in good yields, with high levels of stereocontrol.

Calcium-catalyzed reactions of element-H bonds

Investigation on organocalcium catalysis is just unfolding during the past decade. Beside conventional Ca salts with strong electron-withdrawing counter anions that may serve as Lewis acid catalysts, many Ca complexes have also been designed recently and found to be good catalysts in activation of element-H (EH) bonds like transition metal catalysts. These findings are interesting and may attract the interest of the chemists. Due to the great abundance, non-toxicity, and biocompatible features of Ca element, Ca-catalyzed reactions can be of great significance from the viewpoint of industry. This short review summarizes the recent advances on Ca-catalyzed reactions of EH bonds. We hope that it may provide a useful guide for interested readers from both the academy and industry.

Amido Ca and Yb(II) Complexes Coordinated by Amidine-Amidopyridinate Ligands for Catalytic Intermolecular Olefin Hydrophosphination

A series of amido Ca and Yb(II) complexes LM[N(SiMe₃)₂](THF) (1Yb, 1-4Ca) coordinated by amidine-amidopyridinate ligands L^1-4 were synthesized via a transamination reaction between proligands L^1-4H and bisamido complexes M[N(SiMe₃)₂]₂(THF)₂ (M = Yb, Ca). The reactions of Yb[N(SiMe₃)₂]₂(THF)₂ with proligands L²H-L⁴H containing CF₃ and C₆H₄F fragments do not allow for preparing the target Yb(II) complexes, while the Ca analogues were synthesized in good yields. Complexes 1Yb and 1-4Ca were evaluated as precatalysts for hydrophosphination of styrene, p-substituted styrenes, α-Me-styrene, and 2,3-dimethylbutadiene with various primary and secondary phosphines (PhPH₂, 2,4,6-Me₃C₆H₂PH₂, 2-C₅NH₄PH₂, Ph₂PH, Cy₂PH). Complexes 1Yb, 1-4Ca performed high catalytic activities in styrene hydrophosphination with PhPH₂ and Ph₂PH and demonstrated high regioselectivity affording exclusively the anti-Markovnikov addition products. For primary PhPH₂ the reactions (1:1 molar ratio of substrates) catalyzed by 1Yb, 1Ca, and 2Ca proved to be highly chemoselective affording the secondary phosphine Ph(PhCH₂CH₂)PH; however, complexes 3Ca and 4Ca led to the formation of both secondary and tertiary phosphines in 80:20 and 86:14 ratios. Styrene hydrophosphinations with 2,4,6-Me₃C₆H₂PH₂ and 2-pyridylphosphine for all complexes 1Yb and 1-4Ca proceeded much more slowly compared to PhPH₂. Addition of 2-C₅NH₄PH₂ to styrene catalyzed by complex 1Yb turned out to be non-regioselective and led to the formation of a mixture of Markovnikov and anti-Markovnikov addition products, while all Ca complexes enabled regioselective anti-Markovnikov addition. Complexes 1Ca and 1Yb containing catalytic centers featuring similar ionic radii performed different catalytic activity: the ytterbium analogue proved to be a more active catalyst for intermolecular hydrophosphination of styrene with Cy₂PH, 2-C₅NH₄PH₂, and PhPH₂, but less active with sterically demanding 2,4,6-Me₃C₆H₂PH₂. Styrenes containing in p-position electron-donating groups (Me, tBu, OMe) performed with noticeably lower rates in the reactions with PhPH₂ compared to styrene. Complexes 1Yb, 1Ca, 2Ca, 3Ca, and 4Ca enabled addition of PhPH₂ toward the double C═C bond of α-Me-styrene, and the reaction rate for this substrate is noticeably lower; however quantitative conversions were reached in ∼40 h. Complexes 1Ca and 2Ca promoted 1,2-addition of PhPH₂ to 2,3-dimethyl butadiene with excellent regio- and chemoselectivity to afford linear secondary phosphines. Hydrophosphination of inert 1-nonene with Ph₂PH with 40% conversion becomes possible due to the application of complex 2Ca (40 h, 70 °C). The rate law for the hydrophosphination of styrene with Ph₂PH catalyzed by 1Ca was found to agree with the idealized equation: v = k[styrene]¹[1Ca]¹.