Crossing the Insulator-to-Metal Barrier with a Thiazyl Radical Conductor

Band-like transport in solution-processed perylene diimide dianion films with high Hall mobility

It is crucial to prepare high-mobility organic polycrystalline film through solution processing. However, the delocalized carrier transport of polycrystalline films in organic semiconductors has rarely been investigated through Hall-effect measurement. This study presents a strategy for building strong intermolecular interactions to fabricate solution-crystallized p-type perylene diimide (PDI) dianion films with a closer intermolecular π-π stacking distance of 3.25 Å. The highly delocalized carriers enable a competitive Hall mobility of 3 cm2 V-1 s-1, comparable to that of the reported high-mobility organic single crystals. The PDI dianion films exhibit a high electrical conductivity of 17 S cm-1 and typical band-like transport, as evidenced by the negative temperature linear coefficient of mobility proportional to T-3/2. This work demonstrates that, as the intermolecular π-π interactions become strong enough, they will display high mobility and conductivity, providing a new approach to developing high-mobility organic semiconductor materials.

Magnetic coupling and spin ordering in bisdithiazolyl, thiaselenazolyl, and bisdiselenazolyl molecular materials

The use of purely organic materials is a promising approach for the miniaturization of devices due to their interesting optical, electronic and magnetic properties. Bisdithiazolyl-based bisDTA compounds have emerged as promising candidates for radical-based single component conductors exhibiting simultaneously magnetic properties. Our computational work focuses on the intriguing magnetism of 4 isostructural pyridine-bridged bisDTA-multifunctional materials triggered by their magnetic and conducting properties being strongly dependent on the different S/Se ratios in the neutral radical skeleton: specifically, bisdithiazolyl (S,S) displays no magnetic order at low temperatures, thiaselenazolyl (Se,S) exhibits spin-canted antiferromagnetism (AFM), and both (S,Se) and bisdiselenazolyl (Se,Se) behave as bulk ferromagnets (FM). Our results reveal that (1) the magnetic response depends on the existence of an intricate network of both AFM and FM spin exchange J_AB couplings between neighbouring radicals; and (2) the structural arrangement of π-stacked pairs of radicals sits on a point in the configurational space that is very close to a crossover region where J_AB switches from AFM to FM. Indeed, for bulk FM, the experimental response is only accounted for when considering an ab initio optimised crystal structure able to portray adequately the electronic structure of bisDTAs in the region close to the temperature at which magnetic ordering emerges. Magneto-structural correlation maps show the large sensitivity of J_AB to very small structural changes with temperature along the π-stacks that lead to drastic changes in the magnetic properties. Clearly, the understanding of magnetism in the title bisDTA compounds is decisive to rationally tailor the properties of multifunctional materials by subtle structural modifications of their crystal packing.

Electronic structure and magnetic coupling in selenium substituted pyridine-bridged bisdithiazolyl multifunctional molecular materials

Bisdithiazolyl radicals have furnished in recent years multiple examples of molecular materials with promising conductive and magnetic properties. The electronic band structure and magnetic ordering in four different isostructural pyridine-bridged bisdithiazolyl and Selenium substituted compounds have been studied by means of hybrid DFT based methods as implemented in the CRYSTAL code. The full rationalization of the properties of these multifunctional magnetic molecular materials requires a careful description of their complex open-shell electronic structure. The results describe the systems as narrow band (0.2-0.3 eV dispersion) open-shell semiconductors with a gap of 1.15-1.40 eV between the valence and conducting bands. The bands defining the insulating gap are dominated by orbital contributions arising from the heteroatoms sitting in the outer rings. A low energy closed-shell metallic solution is found at 0.25-0.35 eV above the magnetic solutions thus suggesting a complex mechanism for electric conduction with band and hopping contributions. The observed trend of the conductivity is in line with the variation of the insulating gap but more rigorous modelling is required to take into account the details of the band structure of the systems. For all the systems the spin density is well localised on the molecular units and is independent of the magnetic solution. Thus the system can be described as an ensemble of well-defined S = 1/2 magnetic centres using a two-body Heisenberg-Dirac-van Vleck spin Hamiltonian. The lowest energy electronic solutions are in line with the observed magnetic behaviour at low temperature. The set of competing magnetic exchange interactions that emerges from using a suitable mapping to consistently describe the low energy magnetic solutions explains the variety of magnetic responses (absence of long-range magnetic order, antiferromagnetism or ferromagnetism) of the four studied compounds at low temperatures.

Benzo[1,2,3]dithiazole Compounds: A History of Synthesis and Their Renewed Applicability in Materials and Synthetic Chemistry, Originating from the Herz Reaction

The benzo[1,2,3]dithiazole is a unique heteroaromatic functionality whose conjugated profile instils some fascinating electronic properties. This has been historically recognized in the design and manufacture of organic dyes early last century. Although, with the benefit of increased diagnostic techniques and improved understanding, these structures are attracting greater attention in additional research settings, including applications as organic radicals and semiconductors. In addition, the benzodithiazole functionality has been shown to be a valuable synthetic intermediate in the preparation of a variety of other privileged aromatic and heteroaromatic targets, many of which are important APIs. In this review, the authors aim to critically analyse the potential applicability of these compounds to the fields of not only small-scale laboratory synthetic and medicinal chemistry but also commercial-scale processes and increasingly materials chemistry.

Conducting neutral gold bisdithiolene complex [Au(dspdt)2]˙

[Au(dspdt)2] (dspdt = 2,3-dihydro-5,6-selenophenedithiolate) is an unprecedented example of a neutral gold bisdithiolene complex with a unique structure composed of interacting dimer and trimer chains displaying relatively high electrical conductivity (0.1 S cm-1 at room temperature).

A chemical perspective on high pressure crystal structures and properties

The general availability of third generation synchrotron sources has ushered in a new era of high pressure research. The crystal structure of materials under compression can now be determined by X-ray diffraction using powder samples and, more recently, from multi-nano single crystal diffraction. Concurrently, these experimental advancements are accompanied by a rapid increase in computational capacity and capability, enabling the application of sophisticated quantum calculations to explore a variety of material properties. One of the early surprises is the finding that simple metallic elements do not conform to the general expectation of adopting 3D close-pack structures at high pressure. Instead, many novel open structures have been identified with no known analogues at ambient pressure. The occurrence of these structural types appears to be random with no rules governing their formation. The adoption of an open structure at high pressure suggested the presence of directional bonds. Therefore, a localized atomic hybrid orbital description of the chemical bonding may be appropriate. Here, the theoretical foundation and experimental evidence supporting this approach to the elucidation of the high pressure crystal structures of group I and II elements and polyhydrides are reviewed. It is desirable and advantageous to extend and apply established chemical principles to the study of the chemistry and chemical bonding of materials at high pressure.

Air-Stable Thin Films with High and Anisotropic Electrical Conductivities Composed of a Carbon-Centered Neutral π-Radical

Air-stable thin films (50-720 nm thickness) composed of a carbon-centered neutral π-radical with high and anisotropic electrical conductivities were fabricated by vapor deposition of 4,8,12-trioxotriangulene (TOT). The thin films were air-stable over 15 months and were the aggregate of TOT microcrystals, in which a one-dimensional π-stacking column was formed through the strong singly occupied molecular orbital (SOMO)-SOMO interaction with two-electron-multicenter bond among the spin-delocalized π-planes. The orientations of the one-dimensional column of TOT were changed depending on the deposition rate and substrates, where face-on-oriented thin films were epitaxially grown on the graphite 0001 surface, and edge-on-oriented thin films were grown on glass, SiO2, and indium tin oxide substrates under a high-deposition rate condition. The films showed high electrical conductivities of 2.5 × 10-2 and 5.9 × 10-5 S cm-1 along and perpendicular to the π-stacking column, respectively, for an edge-on oriented thin film.

The Importance of Electronic Dimensionality in Multiorbital Radical Conductors

The exceptional performance of oxobenzene-bridged bis-1,2,3-dithiazolyls 6 as single-component neutral radical conductors arises from the presence of a low-lying π-lowest unoccupied molecular orbital, which reduces the potential barrier to charge transport and increases the kinetic stabilization energy of the metallic state. As part of ongoing efforts to modify the solid-state structures and transport properties of these so-called multiorbital materials, we report the preparation and characterization of the acetoxy, methoxy, and thiomethyl derivatives 6 (R = OAc, OMe, SMe). The crystal structures are based on ribbonlike arrays of radicals laced together by S···N' and S···O' secondary bonding interactions. The steric and electronic effects of the exocyclic ligands varies, affording one-dimensional (1D) π-stacked radicals for R = OAc, 1D cofacial dimer π-stacks for R = SMe, and a pseudo two-dimensional (2D) brick-wall arrangement for R = OMe. Variable-temperature magnetic and conductivity measurements reveal strong antiferromagnetic interactions and Mott insulating behavior for the two radical-based structures (R = OAc, OMe), with lower room-temperature conductivities (σ_RT ≈ 1 × 10^-4 and ∼1 × 10^-3 S cm^-1, respectively) and higher thermal activation energies ( E_act = 0.24 and 0.21 eV, respectively) than found for the ideal 2D brick-wall structure of 6 (R = F), where σ_RT ≈ 1 × 10^-2 S cm^-1 and E_act = 0.10 eV. The performance of R = OMe, OAc relative to that of R = F, is consistent with the results of density functional theory band electronic structure calculations, which indicate a lower kinetic stabilization energy of the putative metallic state arising from their reduced electronic dimensionality.

Pancakes under Pressure: A Case Study on Isostructural Dithia- and Diselenadiazolyl Radical Dimers

The isostructural dimers of the 1,4-phenylene-bridged bis-1,2,3,5-dithia- and bis-1,2,3,5-diselenadiazolyl diradicals 1,4-S/Se are small band gap semiconductors. The response of their molecular and solid state electronic structures to pressure has been explored over the range 0-10 GPa. The crystal structures, which consist of cofacially aligned (pancake) π-dimers packed into herringbone arrays, experience a continuous, near-isotropic compression. While the intramolecular covalent E-E (E = S/Se) bonds remain relatively unchanged with pressurization, the intradimer E···E separations are significantly shortened. Molecular and band electronic structure calculations using density functional theory methods indicate that compression of the π-dimers leads to a widening of the gap Δ E between the highest occupied and lowest unoccupied molecular orbitals of the dimer, an effect that offsets the expected decrease in the valence-to-conduction band gap E_g occasioned by pressure-induced spreading of the valence and conduction bands. Consistent with the predicted consequences of this competition between intra- and interdimer interactions, variable temperature high pressure conductivity measurements reveal at best an order-of-magnitude increase in conductivity with pressure for the two compounds over the pressure range 0-10 GPa. While a small reduction in the thermal activation energy E_act with increasing pressure is observed, extrapolation of the rate of decrease suggests a projected onset of metallization ( E_act ≈ 0) in excess of 20 GPa.

Effect of Substitution on the Hysteretic Phase Transition in a Bistable Phenalenyl-Based Neutral Radical Molecular Conductor

The ability to tune the physical properties of bistable organic functional materials by means of chemistry can facilitate their development for molecular electronic switching components. The butylamine-containing biphenalenyl boron neutral radical, [Bu]₂ B, crystalline compound has recently attracted significant attention by displaying a hysteretic phase transition accompanied by simultaneous bistability in magnetic, electrical, and optical properties close to room temperature. In this report, substitutional doping was applied to [Bu]₂ B by crystallizing solid solutions of bistable [Bu]₂ B and its non-radical-containing counterpart [Bu]₂ Be. With increasing doping degree, the hysteretic phase transition is gradually suppressed in terms of reducing the height, but conserves the width of the hysteresis loop as observed through magnetic susceptibility and electrical conductivity measurements. At the critical doping level of about 6 %, the abrupt transformation of the crystal structure to that of the pure [Bu]₂ Be crystal packing was observed, accompanied by a complete collapse of the hysteresis loop. Further study of the structure-properties relationships of bistable neutral radical conductors based on the [Bu]₂ B host can be conducted utilizing a variety of biphenalenyl-based molecular conductors.

A Concise Synthetic Strategy for Accessing Ambient Stable Bisphenalenyls toward Achieving Electroactive Open-Shell π-Conjugated Materials

Open-shell, π-conjugated molecules represent exciting next-generation materials due to their unique optoelectronic and magnetic properties and their potential to exploit unpaired spin densities to engineer exceptionally close π-π interactions. However, prior syntheses of ambient stable, open-shell molecules required lengthy routes and displayed intermolecular spin-spin coupling with limited dimensionality. Here we report a general fragment-coupling strategy with phenalenone that enables the rapid construction of both biradicaloid (Ph₂- s-IDPL, 1) and radical [10(OTf)] bisphenalenyls in ≤7 steps from commercial starting materials. Significantly, we have discovered an electronically stabilized π-radical cation [10(OTf)] that shows multiple intermolecular closer-than-vdW contacts (<3.4 Å) in its X-ray crystal structure. DFT simulations reveal that each of these close π-π interactions allows for intermolecular spin-spin coupling to occur and suggests that 10(OTf) achieves electrostatically enhanced intermolecular covalent-bonding interactions in two dimensions. Single crystal devices were fabricated from 10(OTf) and demonstrate average electrical conductivities of 1.31 × 10^-2 S/cm. Overall, these studies highlight the practical synthesis and device application of a new π-conjugated material, based on a design principle that promises to facilitate spin and charge transport.

Benzoquinone-Bridged Heterocyclic Zwitterions as Building Blocks for Molecular Semiconductors and Metals

In pursuit of closed-shell building blocks for single-component organic semiconductors and metals, we have prepared benzoquino-bis-1,2,3-thiaselenazole QS, a heterocyclic selenium-based zwitterion with a small gap (λ_max = 729 nm) between its highest occupied and lowest unoccupied molecular orbitals. In the solid state, QS exists in two crystalline phases and one nanocrystalline phase. The structures of the crystalline phases (space groups R3 c and P2₁/ c) have been determined by high-resolution powder X-ray diffraction methods at ambient and elevated pressures (0-15 GPa), and their crystal packing patterns have been compared with that of the related all-sulfur zwitterion benzoquino-bis-1,2,3-dithiazole QT (space group Cmc2₁). Structural differences between the S- and Se-based materials are interpreted in terms of local intermolecular S/Se···N'/O' secondary bonding interactions, the strength of which varies with the nature of the chalcogen (S vs Se). While the perfectly two-dimensional "brick-wall" packing pattern associated with the Cmc2₁ phase of QT is not found for QS, all three phases of QS are nonetheless small band gap semiconductors, with σ_RT ranging from 10^-5 S cm^-1 for the P2₁/ c phase to 10^-3 S cm^-1 for the R3 c phase. The bandwidths of the valence and conduction bands increase with applied pressure, leading to an increase in conductivity and a decrease in thermal activation energy E_act. For the R3 c phase, band gap closure to yield an organic molecular metal with a σ_RT of ∼10² S cm^-1 occurs at 6 GPa. Band gaps estimated from density functional theory band structure calculations on the ambient- and high-pressure crystal structures of QT and QS correlate well with those obtained experimentally.

Nitrogen Oxides and Nitric Acid Enable the Sustainable Hydroxylation and Nitrohydroxylation of Benzenes under Visible Light Irradiation

A new type of waste recycling strategy is described in which nitrogen oxides or nitric acid are directly employed in photocatalyzed hydroxylations and nitrohydroxylations of benzenes. Through these transformations, otherwise costly denitrification can be combined with the synthesis of valuable compounds for various applications.

TTF–PTM dyads: from switched molecular self assembly in solution to radical conductors in solid state

Dyads formed by tetrathiafulvalene (TTF) linked to perchlorotriphenylmethyl (PTM) radicals exhibit interesting physical properties such as bistability in solution or conductivity in solid state.

The quest for rationalizing the magnetism in purely organic semiquinone-bridged bisdithiazolyl molecular magnets

Semiquinone-bridged bisdithiazolyl-based radicals (XBBO) are appealing purely organic magnetic building blocks for the synthesis of new functional materials. Remarkably, for the phenyl-derivative PhBBO, the rationalization of its magnetism becomes a proof of concept that DFT can dramatically fail to evaluate JAB magnetic interactions between purely organic radical pairs. Instead, wavefunction-based methods are required. Once JAB's are fully characterized, the magnetic topology of PhBBO is disclosed to consist of ferromagnetic FM π-stacks that are very weakly coupled (by FM and AFM JAB interactions). The magnetic susceptibility χT(T) and magnetization M(H) of PhBBO are then calculated using a first-principles bottom-up approach. The study of the unit cell contraction upon cooling from room temperature to zero-Kelvin is relevant to propose a suitable model for the phase transition that occurs at 4.5 K. A simplistic picture tells us that the antiparallel-aligned 1D-FM-chains convert into domains of weakly either FM- or AFM-coupled 1D-FM-chains. Accordingly, the presence of these domains may introduce geometrical spin frustration below 4.5 K.

Theoretical study of the H/D isotope effect on phase transition of hydrogen-bonded organic conductor κ-H3(Cat-EDT-TTF)2

κ-H₃(Cat-EDT-TTF)₂ (H-TTF) is a hydrogen-bonded π-electron system. Only its isotopologue, D-TTF, shows the phase transition. We obtained a symmetric single-well effective-PEC for H-TTF and low-barrier effective-PEC for D-TTF.

The metallic state in neutral radical conductors: dimensionality, pressure and multiple orbital effects

Pressure-induced changes in the solid-state structures and transport properties of three oxobenzene-bridged bisdithiazolyl radicals 2 (R = H, F, Ph) over the range 0-15 GPa are described. All three materials experience compression of their π-stacked architecture, be it (i) 1D ABABAB π-stack (R = Ph), (ii) quasi-1D slipped π-stack (R = H), or (iii) 2D brick-wall π-stack (R = F). While R = H undergoes two structural phase transitions, neither of R = F, Ph display any phase change. All three radicals order as spin-canted antiferromagnets, but spin-canted ordering is lost at pressures <1.5 GPa. At room temperature, their electrical conductivity increases rapidly with pressure, and the thermal activation energy for conduction Eact is eliminated at pressures ranging from ∼3 GPa for R = F to ∼12 GPa for R = Ph, heralding formation of a highly correlated (or bad) metallic state. For R = F, H the pressure-induced Mott insulator to metal conversion has been tracked by measurements of optical conductivity at ambient temperature and electrical resistivity at low temperature. For R = F compression to 6.2 GPa leads to a quasiquadratic temperature dependence of the resistivity over the range 5-300 K, consistent with formation of a 2D Fermi liquid state. DFT band structure calculations suggest that the ease of metallization of these radicals can be ascribed to their multiorbital character. Mixing and overlap of SOMO- and LUMO-based bands affords an increased kinetic energy stabilization of the metallic state relative to a single SOMO-based band system.

Band Structure Engineering by Substitutional Doping in Solid-State Solutions of [5-Me-PLY(O,O)]2B(1-x)Be(x) Radical Crystals

We report the substitutional doping of solid-state spiro-bis(5-methyl-1,9-oxido-phenalenyl)boron radical ([2]2B) by co-crystallization of this radical with the corresponding spiro-bis(5-methyl-1,9-oxido-phenalenyl)beryllium compound ([2]2Be). The pure compounds crystallize in different space groups ([2]2B, P1̅, Z = 2; [2]2Be, P2₁/c, Z = 4) with distinct packing arrangements, yet we are able to isolate crystals of composition [2]2B(1-x)Be(x), where x = 0-0.59. The phase transition from the P1̅ to the P2₁/c space group occurs at x = 0.1, but the conductivities of the solid solutions are enhanced and the activation energies reduced for values of x = 0-0.25. The molecular packing is driven by the relative concentration of the spin-bearing ([2]2B) and spin-free ([2]2Be) molecules in the crystals, and the extended Hückel theory band structures show that the progressive incorporation of spin-free [2]2Be in the lattice of the [2]2B radical (overall bandwidth, W = 1.4 eV, in the pure compound) leads to very strong narrowing of the bandwidth, which reaches a minimum at [2]2Be (W = 0.3 eV). The results provide a graphic picture of the structural transformations undergone by the lattice, and at certain compositions we are able to identify distinct structures for the [2]2B and [2]2Be molecules in a single crystalline phase.

Synthesis and properties of the 3-tert-butyl-7-trifluoromethyl-1,4-dihydro-1-phenyl-1,2,4-benzotriazin-4-yl radical

The novel 3-tert-benzotriazinyl radical carrying the trifluoromethyl group was synthesized and exhibited pure 1D ferromagnetic interaction in the columnar structure.

When a single hole aligns several spins: double exchange in organic systems

The double exchange is a well-known and technically important phenomenon in solid state physics. Ionizing a system composed of two antiferromagnetically coupled high-spin units, the ground state of which is a singlet state, may actually produce a high-spin ground state. This work illustrates the possible occurrence of such a phenomenon in organic chemistry. The here-considered high-spin units are triangulenes, the ground state of which is a triplet. Bridging two of them through a benzene ring produces a molecular architecture of singlet ground state. A careful exploitation of a series of unrestricted density functional calculations enables one to avoid spin contamination in the treatment of the doublet states and shows that under ionization the system becomes of quartet multiplicity in its ground state. The possibility to align more than three spins from conjugated hydrocarbon polyradicals is explored, considering partially hydrogenated triangulenes. A dramatic example shows that ionization of a singlet ground state molecule may generate a decuplet.