Two-dimensional nanocrystals of molecular Janus particles

Simultaneously Flame Retarding and Toughening of Epoxy Resin Composites Based on Two-Dimensional Polyhedral Oligomeric Silsesquioxane/Polyoxometalate Supramolecular Nanocrystals with Ultralow Loading

For industrial practical applications, it is difficult to simultaneously endow epoxy resin (EP) composites with superior flame retardancy, smoke suppression, toughness, and low-dielectric constants. Herein, unique polyhedral oligomeric silsesquioxane/polyoxometalate (POM(Mo)-POSS(ibu-Li)) nanosheets were synthesized via a simple one-pot method using laboratory-made lithium-containing hepta-isobutyl-POSS (ibu-Li-POSS) and the low-cost industrial chromogenic agent H3PMo12O40 as raw materials. The incorporation of 2 wt % POM(Mo)-POSS(ibu-Li) nanoflakes into EP significantly enhanced the compatibility between nanoadditives and the EP matrix. Compared with EP, the flexural and impact strengths increased by 36.2 and 78.2%, respectively. Therefore, POM(Mo)-POSS(ibu-Li) has significant advantages in enhancing the toughness of EP compared with existing flame retardants. The dielectric constant and loss were apparently reduced to meet the increasing requirements of EP-type electronic packaging materials and components. Notably, the synthesized POM(Mo)-POSS(ibu-Li) contained various flame-retardant and smoke-suppression elements such as P, Mo, and Si. The ultralow loading (2 wt %) of POM(Mo)-POSS(ibu-Li) significantly reduced the peak heat release rate, peak of smoke production rate, and CO production rate by 43.9, 40.6, and 65.8%, respectively. Meanwhile, the value of LOI increased directly from 24.0% for EP to 30.2% and passed the V-0 rating in the UL-94 test. However, incorporating 5 wt % POSS derivatives into EP alone to ensure that the prepared composites pass the V-0 rating of the UL-94 test has always been an extraordinarily difficult problem. Therefore, the dilemmas of poor dielectric properties, inherent flammability, and brittleness of EP were completely overcome through the successful application of POM(Mo)-POSS(ibu-Li) supramolecular nanosheets.

Preparation of T8 and double-decker silsesquioxane-based Janus-type molecules: molecular modeling and DFT insights

We present a methodology for the synthesis of inorganic-organic Janus-type molecules based on mono-T8 and difunctionalized double-decker silsesquioxanes (DDSQs) via hydrosilylation reactions, achieving exceptionally high yields and selectivities. The synthesized compounds were extensively characterized using various spectroscopic techniques, and their sizes and spatial arrangements were predicted through molecular modelling and density functional theory (DFT) calculations. Quantum chemical calculations were employed to examine the interactions among four molecules of the synthesized compounds. These computational results allowed us to determine the propensity for molecular aggregation, identify the functional groups involved in these interactions, and understand the changes in interatomic distances during aggregation. Understanding the aggregation behaviour of silsesquioxane molecules is crucial for tailoring their properties for specific applications, such as nanocomposites, surface coatings, drug delivery systems, and catalysts. Through a combination of experimental and computational approaches, this study provides valuable insights into the design and optimization of silsesquioxane-based Janus-type molecules for enhanced performance across various fields.

Precise Assembly of Polyoxometalates at Single-cluster Levels

Polyoxometalate (POM) clusters with atomic precision structures are promising candidates construct functional nanomaterials via self-assembly. Non-covalent interactions at molecular levels can govern the self-assembly of POM clusters, for which the precise control of POM-based assemblies can be realized at single-cluster levels. This mini-review focuses on the synthesis and properties of POM-based nanostructures, including amphiphilic POM assemblies and co-assemblies of POM clusters and other subnanometer building blocks. Several synthetic strategies have been developed for rational control of POM-based assemblies in terms of morphologies, compositions and properties. 1D subnanometer POM assemblies demonstrate remarkable enhanced mechanical properties due to the topological interactions between nanowires and surroundings. The in-depth understanding of POM-based assemblies may help in the design of functional nanomaterials in fundamental perspectives and applications.

Leveraging Macromolecular Isomerism for Phase Complexity in Janus Nanograins

It remains intriguing whether macromolecular isomerism, along with competing molecular interactions, could be leveraged to create unconventional phase structures and generate considerable phase complexity in soft matter. Herein, we report the synthesis, assembly, and phase behaviors of a series of precisely defined regioisomeric Janus nanograins with distinct core symmetry. They are named B₂DB₂ where B stands for iso-butyl-functionalized polyhedral oligomeric silsesquioxanes (POSS) and D stands for dihydroxyl-functionalized POSS. While BPOSS prefers crystallization with a flat interface, DPOSS prefers to phase-separate from BPOSS. In solution, they form 2D crystals owing to strong BPOSS crystallization. In bulk, the subtle competition between crystallization and phase separation is strongly influenced by the core symmetry, leading to distinct phase structures and transition behaviors. The phase complexity was understood based on their symmetry, molecular packing, and free energy profiles. The results demonstrate that regioisomerism could indeed generate profound phase complexity.

First Ultrathin Pure Polyoxometalate 2D Material as a Peroxidase-Mimicking Catalyst for Detecting Oxidative Stress Biomarkers

Although two-dimensional (2D) materials with ultrathin geometry and extraordinary electrical attributes have attracted substantial concern, exploiting new-type 2D materials is still a great challenge. In this work, an unprecedented single-layer pure polyoxometalate (POM) 2D material (2D-1) was prepared by ultrasonically exfoliating a one-dimensional (1D)-chain heterometallic crystalline germanotungstate Na₄[Ho(H₂O)₆]₂[Fe₄(H₂O)₂(pic)₆Ge₂W₂₀O₇₂]·16H₂O (1) (Hpic = picolinic acid). The 1D polymeric chain of 1 is assembled from particular {Ge₂W₂₀}-based [Fe₄(H₂O)₂(pic)₆Ge₂W₂₀O₇₂]^10- segments through bridging [Ho(H₂O)₆]³⁺ cations. 2D-1 is formed by π-π interaction driving force among adjacent 1D polymeric chains of 1. Also, the peroxidase-mimicking properties of 2D-1 toward detecting H₂O₂ were evaluated and good detection result was observed with a limit of detection (LOD) of 58 nM. Density functional theory (DFT) calculation further confirms that 2D-1 displays outstanding catalytic activity and active sites are located on Fe centers and Hpic ligands. Under the catalysis of uricase, uric acid can be transformed to allantoin and H₂O₂, and then, H₂O₂ oxidizes TMB to its blue ox-TMB in the presence of 2D-1 as a catalyst. Then, we utilized this cascade reaction to detect uric acid, which also exhibits prominent results. This research opens a door to prepare ultrathin pure POM 2D materials and broadens the scope of potential applications of POMs in biology and iatrology.

Self-assembly of fullerene C60-based amphiphiles in solutions

Fullerene C₆₀ is an all-carbon cage molecule with rich physicochemical properties. It is highly symmetric and hydrophobic, which can be used as a building block for the preparation of amphiphiles that self-assemble into diverse supramolecular structures in aqueous solutions. Meanwhile, C₆₀ is also lipophobic, which is different from the alkyl chains in traditional surfactants. By attaching alkyl chains to the C₆₀ sphere, a new type of lipophobic-lipophilic amphiphiles can be constructed which undergo self-assembly in n-alkanes. When inorganic clusters such as polyoxometalate are linked to the C₆₀ sphere, organic-inorganic hybrids will be obtained which can self-assemble in polar organic solvents. Pristine C₆₀ has also been modified by polar groups such as hydroxy and carboxy, which are linked to hydrophobic moieties and form a new class of amphiphiles. In this review, the self-assembly of C₆₀-based amphiphiles in aqueous and nonaqueous solutions will be summarized. The characteristics exhibited by C₆₀-based amphiphiles during the self-assembly will be discussed with close comparison to traditional surfactants, and the influences of the aggregate formation on the physicochemical properties of the C₆₀ sphere will be described. Finally, a brief summary will be given together with a promising perspective in near future.

Cationic peptides template the assembly of polyoxometalates into ultrathin nanosheet with in-plane ordered arrangement

Ultrathin polyoxometalates nanosheets with in-plane alignment have been constructed in aqueous solution with the assistance of cationic peptides. Different POMs varying in topology, size, and charges could be templated into...

A robust platform to construct molecular patchy particles with a pentiptycene skeleton toward controlled mesoscale structures

A new pentiptycene skeleton with orthogonally reactive sites and inherent D2h-symmetry to construct molecular pathy particles toward mesoscale structures.

Screw dislocation-induced pyramidal crystallization of dendron-like macromolecules featuring asymmetric geometry

We report herein that dendron-shaped macromolecules AB n crystallize into well-ordered pyramid-like structures from mixed solvents, instead of spherical motifs with curved structures, as found in the bulk. The design of the asymmetric molecular architecture and the choice of mixed solvents are applied as strategies to manipulate the crystallization process. In mixed solvents, the solvent selection for the Janus macromolecule and the existence of dominant crystalline clusters contribute to the formation of flat nanosheets. Whereas during solvent evaporation, the bulkiness of the asymmetric macromolecules easily creates defects within 2D nanosheets which lead to their spiral growth through screw dislocation. The size of the nanosheets and the growth into 2D nanosheets or 3D pyramidal structures can be regulated by the solvent ratio and solvent compositions. Moreover, macromolecules of higher asymmetry generate polycrystals of lower orderliness, probably due to higher localized stress.

Recent Advances about the Applications of Click Reaction in Chemical Proteomics

Despite significant advances in biological and analytical approaches, a comprehensive portrait of the proteome and its dynamic interactions and modifications remains a challenging goal. Chemical proteomics is a growing area of chemical biology that seeks to design small molecule probes to elucidate protein composition, distribution, and relevant physiological and pharmacological functions. Click chemistry focuses on the development of new combinatorial chemical methods for carbon heteroatom bond (C-X-C) synthesis, which have been utilized extensively in the field of chemical proteomics. Click reactions have various advantages including high yield, harmless by-products, and simple reaction conditions, upon which the molecular diversity can be easily and effectively obtained. This paper reviews the application of click chemistry in proteomics from four aspects: (1) activity-based protein profiling, (2) enzyme-inhibitors screening, (3) protein labeling and modifications, and (4) hybrid monolithic column in proteomic analysis.

Crystallization Induced Self-Assembly: A Strategy to Achieve Ultra-Small Domain Sizes

Achieving self-assembled nanostructures with ultra-small feature sizes (e. g., below 5 nm) is an important prerequisite for the development of block copolymer lithography. In this work, the preparation and self-assembly of a series of giant molecules composed of vinyl polyhedral oligomeric silsesquioxane (VPOSS) tethered with monodispersed oligo(L-lactide) chains are presented. Small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) results demonstrate that ultra-small domain sizes (down to 3 nm) of phase separated lamellar morphology are achieved in bulk, driven by the strong tendency and fast kinetics for crystallization of VPOSS moieties. Moreover, upon gamma ray radiation, VPOSS cages in the lamellar structure can be crosslinked via polymerization of the vinyl groups. After pyrolysis at high temperature, ultra-thin two-dimensional nano-silica sheets can be obtained.

Programmable two-dimensional nanocrystals assembled from POSS-containing peptoids as efficient artificial light-harvesting systems

Inspired by the formation of hierarchically structured natural biominerals (e.g., bone and tooth), various sequence-defined polymers have been synthesized and exploited for design and synthesis of functional hybrid materials. Here, we synthesized a series of organic-inorganic hybrid peptoids by using polyhedral oligomeric silsesquioxane (POSS) nanoclusters as side chains at a variety of backbone locations. We further demonstrated the use of these hybrid peptoids as sequence-defined building blocks to assemble a new class of programmable two-dimensional (2D) nanocrystals. They are highly stable and exhibit an enhanced mechanical property and electron scattering due to the incorporated POSS nanoclusters. By varying peptoid side-chain chemistry, we further demonstrated the precise displacement of a large variety of function groups within these 2D nanocrystals and developed a highly efficient aqueous light-harvesting system for live cell imaging. Because these 2D nanocrystals are biocompatible and highly programmable, we expect that they offer unique opportunities for applications.

Thickness control of 2D nanosheets assembled from precise side-chain giant molecules

The performance of 2D nanomaterials hinges on both the chemical compositions and the morphological structures across different length scales. Among all the three dimensions, thickness is the only one that falls into the nanometer scale and, to some extent, determines the intrinsic properties of 2D nanomaterials. In this study, we report the preparation and precise thickness control of 2D nanosheets assembled from a library of monodispersed amphiphilic giant molecules composed of functional polyhedral oligomeric silsesquioxanes (POSSs) as the side groups. Solution self-assembly of such giant molecules resulted in 2D nanosheets with similar structural configurations, where a bilayer of hydrophobic isobutyl POSS (BPOSS) is sandwiched by two monolayers of hydrophilic POSS bearing carboxylic acid groups (APOSS). The thickness of the obtained nanosheets could be tuned through adjusting the chemical compositions of the pendant POSS cages. Intriguingly, we found that the thickness of the 2D nanosheets was not necessarily proportional to the contour length of the giant molecule nor the total number of POSS cages tethered to the main chain. Indeed, the number ratio of BPOSS to APOSS, rather than the exact number, played a deterministic role in the thickness control. To explain the unusual thickness dependence, we built up a structure model with an in-plane orientation of the giant molecules in the nanosheets, from which a formula was further deduced to semi-quantitatively describe the inverse relationship between the overall thickness and the number ratio of BPOSS to APOSS.

Stable and soluble oligomers of porous organic cages through post-synthesized modification

The porous organic cage oligomers as giant molecules were fabricated through post-synthesized modification in a controlled way and moderate yields.

Spherical Supramolecular Structures Constructed via Chemically Symmetric Perylene Bisimides: Beyond Columnar Assembly

Like other discotic molecules, self-assembled supramolecular structures of perylene bisimides (PBIs) are commonly limited to columnar or lamellar structures due to their distinct π-conjugated scaffolds and unique rectangular shape of perylene cores. The discovery of PBIs with supramolecular structures beyond layers and columns may expand the scope of PBI-based materials. A series of unconventional spherical packing phases in PBIs, including A15 phase, σ phase, dodecagonal quasicrystalline (DQC) phase, and body-centered cubic (BCC) phase, is reported. A strategy involving functionalization of perylene core with several polyhedral oligomeric silsesquioxane (POSS) cages achieved spherical assemblies of PBIs, instead of columnar assemblies, due to the significantly increased steric hindrance at the periphery. This strategy may also be employed for the discovery of unconventional spherical assemblies in other related discotic molecules by the introduction of similar bulky functional groups at their periphery. An unusual inverse phase transition sequence from a BCC phase to a σ phase was observed by increasing annealing temperature.

Triblock Copolymer/Polyoxometalate Nanocomposite Electrolytes with Inverse Hexagonal Cylindrical Nanostructures

The primary issue of polymer electrolytes is to achieve high ion conductivity while retaining mechanical properties. A nanocomposite electrolyte with the inverse hexagonal cylindrical phase (three-dimensionally continuous domains for ion conduction and embedded domains for mechanical support) is prepared through the electrostatic self-assembly of a polyoxometalate (H₃ PW₁₂ O₄₀ , PW) and a triblock copolymer poly(N-vinyl pyrrolidone)-block-polystyrene-block-poly(N-vinyl pyrrolidone) (PSP). The cylindrical nanocomposite exhibits a conductivity of 1.32 mS cm^-1 and a storage modulus of 4.6 × 10⁷  Pa at room temperature. These two values are higher than those of pristine PSP by two orders of magnitudes and a factor of six, respectively. PW clusters are used as multifunctional nano-additives (morphological inducer, proton conductor, and nano-enhancer) and their incorporation achieves the simultaneous improvement in both conductive and mechanical performance.

Supramolecular Self-Assembly of Perylene Bisimide-Based Rigid Giant Tetrahedra

Recently, ordered structures constructed from rigid three-dimensional (3D) shaped polyhedra have been drawing general interest, with the tetrahedron being the simplest one but showing complicated assembly behaviors. Rigid tetrahedron building blocks have been shown to form quasicrystalline and crystalline phases with high packing fractions by both simulation and experiments. Nevertheless, the study of 3D tetrahedral building blocks is limited, especially in the field of supramolecular self-assembly. Here, we present an experimental study of rigid giant tetrahedral molecules constructed by attaching four bulky polyhedral oligomeric silsesquioxane (POSS) cages to a tetrahedral perylene bisimide (PBI) scaffold. Self-assembly of these giant tetrahedra is mediated by π-π interaction between the tetrahedral PBI-based scaffolds and their overall tetrahedral symmetry. A monolithic nearly centimeter-sized hexagonal supramolecular structure was observed in the giant tetrahedron with short flexible linkers between PBI and POSS cages, while a micrometer-sized crystalline helical structure formed in that with completely rigid aromatic linkers. Their significant difference in electrical conductivity could be explained by two completely different packing models of the giant tetrahedra.

Magnifying the Structural Components of Biomembranes: A Prototype for the Study of the Self-Assembly of Giant Lipids

How biomembranes are self-organized to perform their functions remains a pivotal issue in biological and chemical science. Understanding the self-assembly principles of lipid-like molecules hence becomes crucial. Herein, we report the mesostructural evolution of amphiphilic sphere-rod conjugates (giant lipids), and study the roles of geometric parameters (head-tail ratio and cross-sectional area) during this course. As a prototype system, giant lipids resemble natural lipidic molecules by capturing their essential features. The self-assembly behavior of two categories of giant lipids (I-shape and T-shape, a total of 8 molecules) is demonstrated. A rich variety of mesostructures is constructed in solution state and their molecular packing models are rationally understood. Giant lipids recast the phase behavior of natural lipids to a certain degree and the abundant self-assembled morphologies reveal distinct physiochemical behaviors when geometric parameters deviate from natural analogues.

Magnetic and Biocompatible Fullerenol/Fe(III) Microcapsules with Antioxidant Activities

Fullerene C₆₀ (refers to C₆₀ hereafter) has a unique three-dimensional architecture and intriguing physicochemical properties. It has great potential applications in materials chemistry and life science. However, a big obstacle for the widespread application of C₆₀ lies in the limited strategies to make supramolecular structures with diverse morphologies and functions. Herein, we report a strategy to prepare C₆₀-based, magnetic microcapsules which can be used as external antioxidants to effectively attenuate oxidative stress. The microcapsules are composed of fullerenol, a highly water-soluble C₆₀ multiadduct, and iron ions (Fe³⁺) released from a rusty nail. They can be easily obtained through coordination between the hydrophilic functional groups in fullerenol and Fe³⁺ with polystyrene microspheres as templates. The fullerenol/Fe³⁺ microcapsules have good colloidal stability both in water and serum. Their biocompatibility has been confirmed by in vitro tests on HEK293 and Hela cells. Electron spin resonance measurements indicate that the fullerenol/Fe³⁺ microcapsules can effectively scavenge hydroxyl radicals (OH·^-) produced by H₂O₂, which greatly improves the living environment of the cells. The fullerenol/Fe³⁺ microcapsules exhibit ferromagnetic properties and can respond to the external magnetic field, enabling magnetic manipulation, and/or separation in practical applications.

Toward Cluster Materials with Ordered Structures via Self-Assembly of Heterocluster Janus Molecules

Cluster materials have attracted much attention because of their unique chemical and physical properties, hitherto unseen in bulk materials. Inspired by the lipid self-assembly principle, a series of heterocluster Janus molecules (HCJMs) with atomic precision have been rationally designed and synthesized by connecting different clusters via covalent bonds for the construction of nanomaterials and nano-objects. Due to their amphiphilicity, HCJMs self-assemble into cluster-containing nanomaterials or nano-objects with versatile ordered structures beyond those observed in conventional crystals. Their hybrid composition and nanoscale size are also greatly advantageous in the study of their fine structure by electron microscopy techniques, and enable their formation mechanisms to be unraveled. Finally, the influence of the characteristics of the HCJMs on the structure and properties of the self-assembled nano-objects are explored comprehensively. This synthesis strategy will promote further development of cluster materials with advanced functions via rational molecular design toward the construction of hierarchical nanostructures via molecular self-assembly.

Engineering self-assembly of giant molecules in the condensed state based on molecular nanoparticles

In biological systems, it is well-known that the activities and functions of biomacromolecules are dictated not only by their primary chemistries, but also by their secondary, tertiary, and quaternary hierarchical structures. Achieving control of similar levels in synthetic macromolecules is yet to be demonstrated. Most of the critical molecular parameters associated with molecular and hierarchical structures, such as size, composition, topology, sequence, and stereochemistry, are heterogenous, which impedes the exploration and understanding of structure formation and manipulation. Alternatively, in the past few years we have developed a unique giant molecule system based on molecular nanoparticles, in which the above-mentioned molecular parameters, as well as interactions, are precisely defined and controlled. These molecules could self-assemble into a myriad of unconventional and unique structures in the bulk, thin films, and solution. Giant molecules thus offer a robust platform to manipulate the hierarchical structures via precise and modular assemblies of building blocks in an amplified size level compared with small molecules. It has been found that they are not only scientifically intriguing, but also technologically relevant.

Hierarchical Hybrid Nanostructures Constructed by Fullerene and Molecular Tweezer

For the construction of well-defined hierarchical superstructures of pristine [60]fullerene (C₆₀) arrays, pyrene-based molecular tweezers (PT) were used as host molecules for catching and arranging C₆₀ guest molecules. The formation of host-guest complexes was systematically studied in solution as well as in the solid state. Two-dimensional proton nuclear magnetic resonance spectroscopic studies revealed that PT-host and C₆₀-guest complexes were closely related to the molecular self-assembly of PT. Ultraviolet and fluorescence spectroscopic titrations indicated the formation of stable 1:1 and 2:1 (PT/C₆₀) complexes. From the nonlinear curve-fitting analysis, equilibrium constants for the 1:1 (log K₁) and 2:1 (log K₂) complexes were estimated to be 4.96 and 5.01, respectively. X-ray diffraction results combined with transmission electron microscopy observations clearly exhibited the construction of well-defined layered superstructures of the PT-host and C₆₀-guest complexes. From electron mobility measurements, it was demonstrated that the well-defined hierarchical hybrid nanostructure incorporating a C₆₀ array exhibited a high electron mobility of 1.7 × 10^-2 cm² V^-1 s^-1. This study can provide a guideline for the hierarchical hybrid nanostructures of host-guest complex and its applications.

Cyclodextrin-/photoisomerization-modulated assembly and disassembly of an azobenzene-grafted polyoxometalate cluster

Herein, a mono-lacunary Keggin-type polyoxometalate (POM), [SiW11O39]8-, grafted with an azobenzene group through Sn ion bridging was prepared, and the formed organic-inorganic hybrid cluster was characterized via elemental analysis, NMR, TGA, and IR techniques. A vesicular structure of the hybrid cluster assembly in aqueous media was observed in the TEM image, and it dissociated in the presence of α-/β-, γ-cyclodextrins (α-/β-, γ-CDs); this dissociation was driven by the host-guest interactions. The monodispersed inclusion complex further reassembled into smaller micelles under irradiation with 365 nm light, and this transformation was reversibly controlled by alternating the irradiation with 450 nm light. Moreover, in the case of the POM-Azo/β-CD system, reassembly from the monodispersed state to the vesicular state was achieved by the addition of a competitive guest molecule. Thus, the reversible host-guest interactions combining reversible photoisomerization of the azobenzene group provided multiple ways to modulate the assembly and disassembly of the POM hybrid as well as the changes between different assemblies. The present study inspires the potential use of these kind of hybrid POMs in enhanced catalytic reactions and recycling.

Bi-continuous emulsion using Janus particles

Bi-continuous emulsion stabilized with amphiphilic Janus particles was achieved.

Symmetry-guided, divergent assembly of regio-isomeric molecular Janus particles

Varying a single regio-configuration diverges the assembly outcome into distinct morphologies as mandated by their molecular symmetries.

Programmed Hierarchical Hybrid Nanostructures from Fullerene-Dendrons and Pyrene-Dendrons

The construction of fullerene (C₆₀ ) hierarchical nanostructures with the help of amphiphilic molecules remains a challenging task in nanoscience and nanotechnology. Utilizing the host-guest complex concept, sub-10 nm layered superstructures are constructed from a monofunctionalized C₆₀ dendron (C₆₀ D, guest) and tweezer-like pyrene dendron (PD, host). Since C₆₀ D and PD are asymmetric shape amphiphiles having liquid crystal (LC) dendrons, both C₆₀ D and PD construct head-to-head bilayer superstructures by themselves. From fluorescence titration experiments, it is realized that the host-guest complex shows 1:1 stoichiometric binding with a binding constant (K_sv = 2.45 × 10⁵ m^-1 ). Based on the morphological observations and scattering analyses, it is found that buckle-like asymmetric building blocks (C₆₀ D·PD) are self-assembled by the host-guest complex and construct multilayer hybrid nanostructures. The hierarchical hybrid nanostructures consist of the self-assembled C₆₀ D·PD bilayer with a 2D C₆₀ ·P nanoarray sandwiched between LC dendrons. This advanced strategy is expected to be a practicable and rational guideline for the fabrication of programmed hierarchical hybrid nanostructures.

Anisotropic Particles Templated by Cerberus Emulsions

A strategy to the batch-scale fabrication of anisotropic particles with diverse morphologies and various chemical compositions is reported by applying the highly structured fluids of Cerberus emulsions as templates. The Cerberus emulsions are produced simply by traditional one-step vortex mixing the surfactant aqueous solution with three immiscible oils which are selectively photocurable or incurable. Anisotropic particles are subsequently fabricated by UV-induced polymerization. The diversity in the morphology of the particles is provided by the various controllable geometries of the Cerberus droplets. Various droplet morphologies of "engulfed-linear", "partial-engulfed-linear", and "linear-singlet" are obtained by employing various oil combinations. Precise control of the volume fraction of each segment within the droplet is realized on the basis of the three-phase diagram of the oils. The wide size range is achieved from hundreds of micrometers continuously down to nanometers, with topology remaining. In addition, for a matrix droplet with a fixed morphology, the multiplicity in the chemical composition and in the geometry of the resultant anisotropic particles is realized by selectively polymerizing one, two, or three of the oil lobes. Morphologies of "crescent moon", "etched-Janus", and "sandwich-Janus" are obtained with homogeneous or multiple distinct chemical compositions. The reported strategy is universal and can be extended to a huge family of polymeric anisotropic particles.

Self-Assembly of Polyoxometalate-Peptide Hybrids in Solution: Elucidating the Contributions of Multiple Possible Driving Forces

Incorporating the building blocks of nature (e.g., peptides and DNA) into inorganic polyoxometalate (POM) clusters is a promising approach to improve the compatibilities of POMs in biological fields. To extend their biological applications, it is necessary to understand the importance of different non‐covalent interactions during self‐organization. A series of Anderson POM–peptide hybrids have been used as a simple model to demonstrate the role of different interactions in POM–peptide (biomolecules) systems. Regardless of peptide chain length, these hybrids follow similar solution behaviors, forming hollow, spherical supramolecular structures in acetonitrile/water mixed solvents. The incorporation of peptide tails introduces interesting stimuli‐responsive properties to temperature, hybrid concentration, solvent polarity and ionic strength. Unlike the typical bilayer amphiphilic vesicles, they are found to follow the blackberry‐type assemblies of hydrophilic macroions, which are regulated by electrostatic interaction and hydrogen bonding. The formation of electrostatic assemblies before the supramolecular formation is confirmed by ion‐mobility mass spectrometry (IMS‐MS).

Two-Dimensional Fullerene Assembly from an Exfoliated van der Waals Template

Two-dimensional (2D) materials are commonly prepared by exfoliating bulk layered van der Waals crystals. The creation of synthetic 2D materials from bottom-up methods is an important challenge as their structural flexibility will enable chemists to tune the materials properties. A 2D material was assembled using C₆₀ as a polymerizable monomer. The C₆₀ building blocks are first assembled into a layered solid using a molecular cluster as structure director. The resulting hierarchical crystal is used as a template to polymerize its C₆₀ monolayers, which can be exfoliated down to 2D crystalline nanosheets. Derived from the parent template, the 2D structure is composed of a layer of inorganic cluster, sandwiched between two monolayers of polymerized C₆₀ . The nanosheets can be transferred onto solid substrates and depolymerized by heating. Electronic absorption spectroscopy reveals an optical gap of 0.25 eV, narrower than that of the bulk parent crystalline solid.

Mesoscale Graphene-like Honeycomb Mono- and Multilayers Constructed via Self-Assembly of Coclusters

Honeycomb structure endows graphene with extraordinary properties. But could a honeycomb monolayer superlattice also be generated via self-assembly of colloids or nanoparticles? Here we report the construction of mono- and multilayer molecular films with honeycomb structure that can be regarded as self-assembled artificial graphene (SAAG). We construct fan-shaped molecular building blocks by covalently connecting two kinds of clusters, one polyoxometalate and four polyhedral oligomeric silsesquioxanes. The precise shape control enables these complex molecules to self-assemble into a monolayer 2D honeycomb superlattice that mirrors that of graphene but on the mesoscale. The self-assembly of the SAAG was also reproduced via coarse-grained molecular simulations of a fan-shaped building block. It revealed a hierarchical process and the key role of intermediate states in determining the honeycomb structure. Experimental images also show a diversity of bi- and trilayer stacking modes. The successful creation of SAAG and its stacks opens up prospects for the preparation of novel self-assembled nanomaterials with unique properties.