SpyAvidin hubs enable precise and ultrastable orthogonal nanoassembly

Engineering protein nanoparticles for drug delivery

Protein nanoparticles offer a highly tunable platform for engineering multifunctional drug delivery vehicles that can improve drug efficacy and reduce off-target effects. While many protein nanoparticles have demonstrated the ability to tolerate genetic and posttranslational modifications for drug delivery applications, this review will focus on three protein nanoparticles of increasing size. Each protein nanoparticle possesses distinct properties such as highly tunable stability, capacity for splitting or fusing subunits for modular surface decoration, and well-characterized conformational changes with impressive capacity for large protein cargos. While many of the genetic and posttranslational modifications leverage these protein nanoparticle's properties, the shared techniques highlight engineering approaches that have been generalized across many protein nanoparticle platforms.

Heme-substituted protein assembly bridged by synthetic porphyrin: achieving controlled configuration while maintaining rotational freedom

The use of biological host-guest interactions, specifically the binding of hemoprotein to heme, has attracted significant research interest in the design of artificial protein assemblies. However, because of the inherent flexibility of the propionic acid group of heme, it is difficult to control the positioning and orientation of the protein unit and to construct well-ordered structures. Herein, we report a heme-substituted protein dimer composed of the native hemoprotein HasA, which accommodates a tetraphenylporphyrin bearing an additional metal coordination site. The specific binding of the tetraphenylporphyrin with an additional metal coordination site that protrudes in a fixed direction confines the configuration of the dimer structure to a defined bent form. The small-angle X-ray scattering profile shows the dimer structure with a bent form and suggests dynamic rotational behavior while keeping its bent-core structure, resembling a bevel gear. This unique dimer structure demonstrates that the design of heme-substituted protein assemblies can be expanded to protein assemblies while maintaining the rotational freedom of the individual protein units.

Profibrogenic macrophage-targeted delivery of mitochondrial protector via exosome formula for alleviating pulmonary fibrosis

Pulmonary fibrosis (PF) is a devastating lung disease with limited treatment options. During this pathological process, the profibrogenic macrophage subpopulation plays a crucial role, making the characterization of this subpopulation fundamentally important. The present study revealed a positive correlation between pulmonary macrophages with higher mitochondrial mass (Mømitohigh) and fibrosis. Among the Mømitohigh subpopulation of CD206+ M2, characterized by higher expression of dynamin 1-like (Drp1), as determined by flow cytometry and RNA-seq analysis, a therapeutic intervention was developed using an exosome-based formula composed of pathfinder and therapeutics. A pathfinder exosome called "exosomeMMP19 (ExoMMP19)", was constructed to display matrix metalloproteinase-19 (MMP19) on the surface to locally break down the excessive extracellular matrix (ECM) in the fibrotic lung. A therapeutic exosome called "exosome therapeutics (ExoTx)", was engineered to display D-mannose on the surface while encapsulating siDrp1 inside. Prior delivery of ExoMMP19 degraded excessive ECM and thus paved the way for ExoTx to be delivered into Mømitohigh, where ExoTx inhibited mitochondrial fission and alleviated PF. This study has not only identified Mømitohigh as profibrotic macrophages but it has also provided a potent strategy to reverse PF via a combination of formulated exosomes.

Study on the properties of a dual-system-based protein scaffold for orthogonal self-assembly

Protein scaffolds possessing the ability to efficiently organize enzymes to improve the catalytic performance, enzyme stability and provide an optimal micro-environment for biocatalysis. Here, SpyCatcher fused to the C-terminus of Treptavidin (a variant of streptavidin) to construct a chimeric tetramers protein scaffold (Tr-SC) with dual orthogonal conjugation moieties. The results showed that the expressed Tr-SC scaffold was an active tetramer with good stability under 80 °C and pH 6.5-8.5, which could bind 4 SpyTag-mCherry and 4 Biotin-EGFP. Tr-SC scaffold can bind 1-4 ligands alone under different conditions. The order in which protein scaffolds bind to proteins has little effect on the final complex structure. It is more difficult for SpyTag-mCherry than Biotin-EGFP to bind to Tr-SC, so incomplete conjugates of a hexameric complex composed of 2 SpyTag-mCherry and 4 Biotin-EGFP form when the molar ratio of scaffold and two ligands is 1:4:4. Therefore, it was suggest that the Tr-SC can first bind to excess SpyTag-protein and mixed with Biotin-protein to promote the formation of higher multimers. The results can be important reference for more extensive use of Tr-SC to construct heterologous protein polymers and assembly of heterologous enzyme molecular machine in vitro to carry on efficient cascade reaction in the future.

Multivalent protein-drug conjugates - An emerging strategy for the upgraded precision and efficiency of drug delivery to cancer cells

With almost 20 million new cases per year, cancer constitutes one of the most important challenges for public health systems. Unlike traditional chemotherapy, targeted anti-cancer strategies employ sophisticated therapeutics to precisely identify and attack cancer cells, limiting the impact of drugs on healthy cells and thereby minimizing the unwanted side effects of therapy. Protein drug conjugates (PDCs) are a rapidly growing group of targeted therapeutics, composed of a cancer-recognition factor covalently coupled to a cytotoxic drug. Several PDCs, mainly in the form of antibody-drug conjugates (ADCs) that employ monoclonal antibodies as cancer-recognition molecules, are used in the clinic and many PDCs are currently in clinical trials. Highly selective, strong and stable interaction of the PDC with the tumor marker, combined with efficient, rapid endocytosis of the receptor/PDC complex and its subsequent effective delivery to lysosomes, is critical for the efficacy of targeted cancer therapy with PDCs. However, the bivalent architecture of contemporary clinical PDCs is not optimal for tumor receptor recognition or PDCs internalization. In this review, we focus on multivalent PDCs, which represent a rapidly evolving and highly promising therapeutics that overcome most of the limitations of current bivalent PDCs, enhancing the precision and efficiency of drug delivery to cancer cells. We present an expanding set of protein scaffolds used to generate multivalent PDCs that, in addition to folding into well-defined multivalent molecular structures, enable site-specific conjugation of the cytotoxic drug to ensure PDC homogeneity. We provide an overview of the architectures of multivalent PDCs developed to date, emphasizing their efficacy in the targeted treatment of various cancers.

Strain stiffening of Ndc80 complexes attached to microtubule plus ends

In the mitotic spindle, microtubules attach to chromosomes via kinetochores. The microtubule-binding Ndc80 complex is an integral part of kinetochores, and is essential for kinetochores to attach to microtubules and to transmit forces from dynamic microtubule ends to the chromosomes. The Ndc80 complex has a rod-like appearance with globular domains at its ends that are separated by a long coiled coil. Its mechanical properties are considered important for the dynamic interaction between kinetochores and microtubules. Here, we present a novel method that allows us to time trace the effective stiffness of Ndc80 complexes following shortening microtubule ends against applied force in optical trap experiments. Applying this method to wild-type Ndc80 and three variants (calponin homology (CH) domains mutated or Hec1 tail unphosphorylated, phosphorylated, or truncated), we reveal that each variant exhibits strain stiffening; i.e., the effective stiffness increases under tension that is built up by a depolymerizing microtubule. The strain stiffening relation is roughly linear and independent of the state of the microtubule. We introduce structure-based models that show that the strain stiffening can be traced back to the specific architecture of the Ndc80 complex with a characteristic flexible kink, to thermal fluctuations of the microtubule, and to the bending elasticity of flaring protofilaments, which exert force to move the Ndc80 complexes. Our model accounts for changes in the amount of load-bearing attachments at various force levels and reproduces the roughly linear strain stiffening behavior, highlighting the importance of force-dependent binding affinity.

Non-Covalently Associated Streptavidin Multi-Arm Nanohubs Exhibit Mechanical and Thermal Stability in Cross-Linked Protein-Network Materials

Constructing protein-network materials that exhibit physicochemical and mechanical properties of individual protein constituents requires molecular cross-linkers with specificity and stability. A well-known example involves specific chemical fusion of a four-arm polyethylene glycol (tetra-PEG) to desired proteins with secondary cross-linkers. However, it is necessary to investigate tetra-PEG-like biomolecular cross-linkers that are genetically fused to the proteins, simplifying synthesis by removing additional conjugation and purification steps. Non-covalently, self-associating, streptavidin homotetramer is a viable, biomolecular alternative to tetra-PEG. Here, a multi-arm streptavidin design is characterized as a protein-network material platform using various secondary, biomolecular cross-linkers, such as high-affinity physical (i.e., non-covalent), transient physical, spontaneous chemical (i.e., covalent), or stimuli-induced chemical cross-linkers. Stimuli-induced, chemical cross-linkers fused to multi-arm streptavidin nanohubs provide sufficient diffusion prior to initiating permanent covalent bonds, allowing proper characterization of streptavidin nanohubs. Surprisingly, non-covalently associated streptavidin nanohubs exhibit extreme stability, which translates into material properties that resemble hydrogels formed by chemical bonds even at high temperatures. Therefore, this study not only establishes that the streptavidin nanohub is an ideal multi-arm biopolymer precursor but also provides valuable guidance for designing self-assembling nanostructured molecular networks that can properly harness the extraordinary properties of protein-based building blocks.

Intramolecular covalent bonds in Gram-positive bacterial surface proteins

Gram-positive bacteria experience considerable mechanical perturbation when adhering to host surfaces during colonization and infection. They have evolved various adhesion proteins that are mechanically robust to ensure strong surface adhesion. Recently, it was discovered that these adhesion proteins contain rare, extra intramolecular covalent bonds that stabilize protein structures and participate in surface bonding. These intramolecular covalent bonds include isopeptides, thioesters, and ester bonds, which often form spontaneously without the need for additional enzymes. With the development of single-molecule force spectroscopy techniques, the detailed mechanical roles of these intramolecular covalent bonds have been revealed. In this review, we summarize the recent advances in this area of research, focusing on the link between the mechanical stability and function of these covalent bonds in Gram-positive bacterial surface proteins. We also highlight the potential impact of these discoveries on the development of novel antibiotics and chemical biology tools.

Protein Mediated Enzyme Immobilization

Enzyme immobilization is an essential technology for commercializing biocatalysis. It imparts stability, recoverability, and other valuable features that improve the effectiveness of biocatalysts. While many avenues to join an enzyme to solid phases exist, protein-mediated immobilization is rapidly developing and has many advantages. Protein-mediated immobilization allows for the binding interaction to be genetically coded, can be used to create artificial multienzyme cascades, and enables modular designs that expand the variety of enzymes immobilized. By designing around binding interactions between protein domains, they can be integrated into functional materials for protein immobilization. These materials are framed within the context of biocatalytic performance, immobilization efficiency, and stability of the materials. In this review, supports composed entirely of protein are discussed first, with systems such as cellulosomes and protein cages being discussed alongside newer technologies like spore-based biocatalysts and forizymes. Protein-composite materials such as polymersomes and protein-inorganic supraparticles are then discussed to demonstrate how protein-mediated strategies are applied to many classes of solid materials. Critical analysis and future directions of protein-based immobilization are then discussed, with a particular focus on both computational and design strategies to advance this area of research and make it more broadly applicable to many classes of enzymes.

Protein Nanoparticles: Uniting the Power of Proteins with Engineering Design Approaches

Protein nanoparticles, PNPs, have played a long-standing role in food and industrial applications. More recently, their potential in nanomedicine has been more widely pursued. This review summarizes recent trends related to the preparation, application, and chemical construction of nanoparticles that use proteins as major building blocks. A particular focus has been given to emerging trends related to applications in nanomedicine, an area of research where PNPs are poised for major breakthroughs as drug delivery carriers, particle-based therapeutics or for non-viral gene therapy.

Protein Assembly by Design

Proteins are nature's primary building blocks for the construction of sophisticated molecular machines and dynamic materials, ranging from protein complexes such as photosystem II and nitrogenase that drive biogeochemical cycles to cytoskeletal assemblies and muscle fibers for motion. Such natural systems have inspired extensive efforts in the rational design of artificial protein assemblies in the last two decades. As molecular building blocks, proteins are highly complex, in terms of both their three-dimensional structures and chemical compositions. To enable control over the self-assembly of such complex molecules, scientists have devised many creative strategies by combining tools and principles of experimental and computational biophysics, supramolecular chemistry, inorganic chemistry, materials science, and polymer chemistry, among others. Owing to these innovative strategies, what started as a purely structure-building exercise two decades ago has, in short order, led to artificial protein assemblies with unprecedented structures and functions and protein-based materials with unusual properties. Our goal in this review is to give an overview of this exciting and highly interdisciplinary area of research, first outlining the design strategies and tools that have been devised for controlling protein self-assembly, then describing the diverse structures of artificial protein assemblies, and finally highlighting the emergent properties and functions of these assemblies.

Controlled and Stable Patterning of Diverse Inorganic Nanocrystals on Crystalline Two-Dimensional Protein Arrays

Controlled patterning of nanoparticles on bioassemblies enables synthesis of complex materials for applications in optics, nanoelectronics, and sensing. Biomolecular self-assembly offers molecular control for engineering patterned nanomaterials, but current approaches have been limited in their ability to combine high nanoparticle coverage with generality that enables incorporation of multiple nanoparticle types. Here, we synthesize photonic materials on crystalline two-dimensional (2D) protein sheets using orthogonal bioconjugation reactions, organizing quantum dots (QDs), gold nanoparticles (AuNPs), and upconverting nanoparticles along the surface-layer (S-layer) protein SbsB from the extremophile Geobacillus stearothermophilus. We use electron and optical microscopy to show that isopeptide bond-forming SpyCatcher and SnoopCatcher systems enable the simultaneous and controlled conjugation of multiple types of nanoparticles (NPs) at high densities along the SbsB sheets. These NP conjugation reactions are orthogonal to each other and to Au-thiol bond formation, allowing tailorable nanoparticle combinations at sufficient labeling efficiencies to permit optical interactions between nanoparticles. Fluorescence lifetime imaging of SbsB sheets conjugated to QDs and AuNPs at distinct attachment sites shows spatially heterogeneous QD emission, with shorter radiative decays and brighter fluorescence arising from plasmonic enhancement at short interparticle distances. This specific, stable, and efficient conjugation of NPs to 2D protein sheets enables the exploration of interactions between pairs of nanoparticles at defined distances for the engineering of protein-based photonic nanomaterials.

Dual-Functionalizable Streptavidin-SpyCatcher-Fused Protein-Polymer Hydrogels as Scaffolds for Cell Culture

Hydrogels possessing the ability to control cell functions have great potential as artificial substrates for cell culture. Herein, we report dual-functionalizable protein-polymer hybrid hydrogels prepared by thiol oxidation catalyzed by horseradish peroxidase and a phenolic molecule. A chimera protein of streptavidin (SA) and the SpyCatcher protein, with a cysteine residue at its N-terminus, (C-SA-SC) was constructed and co-cross-linked with thiol-functionalized four-arm polyethylene glycol (PEG-SH) to obtain hydrogels possessing two orthogonal conjugation moieties. Hydrogel formation using C-SA-SC conjugated with biotinylated or SpyTagged functional molecules (premodification strategy) resulted in the formation of hydrogels with a uniform distribution of the functional molecules. Postmodification of the functional molecules of the C-SA-SC hydrogel with biotin or SpyTag could alter the three-dimensional (3D) spatial distribution of the functional molecules within the hydrogels depending on the mode of conjugation (SA/biotin or SpyCatcher/SpyTag), the size of the functional molecules, and the length of time of the modification. NIH-3T3 cells cultured on a C-SA-SC hydrogel, dual-functionalized with a biotinylated-Arg-Gly-Asp-Ser (RGDS) peptide and a basic fibroblast growth factor (bFGF) with SpyTag, showed cell adhesion to the PEG-SH-based hydrogels and cell morphological changes in response to the immobilized RGDS peptide and the bFGF. Moreover, the cells showed higher proliferation on the dual-functionalized C-SA-SC hydrogel than the cells cultured on hydrogels without either the RGDS peptide or the bFGF, demonstrating the benefits of dual-functionalizable hydrogels. The C-SA-SC hydrogel presented in this study is capable of being orthogonally functionalized by two different functional molecules with different 3D distributions of each molecule within the hydrogel and thus has the potential for use as a cell culturing scaffold for creating artificial cellular microstructures.

Power to the protein: enhancing and combining activities using the Spy toolbox

Proteins span an extraordinary range of shapes, sizes and functionalities. Therefore generic approaches are needed to overcome this diversity and stream-line protein analysis or application. Here we review SpyTag technology, now used in hundreds of publications or patents, and its potential for detecting and controlling protein behaviour. SpyTag forms a spontaneous and irreversible isopeptide bond upon binding its protein partner SpyCatcher, where both parts are genetically-encoded. New variants of this pair allow reaction at a rate approaching the diffusion limit, while reversible versions allow purification of SpyTagged proteins or tuned dynamic interaction inside cells. Anchoring of SpyTag-linked proteins has been established to diverse nanoparticles or surfaces, including gold, graphene and the air/water interface. SpyTag/SpyCatcher is mechanically stable, so is widely used for investigating protein folding and force sensitivity. A toolbox of scaffolds allows SpyTag-fusions to be assembled into defined multimers, from dimers to 180-mers, or unlimited 1D, 2D or 3D networks. Icosahedral multimers are being evaluated for vaccination against malaria, HIV and cancer. For enzymes, Spy technology has increased resilience, promoted substrate channelling, and assembled hydrogels for continuous flow biocatalysis. Combinatorial increase in functionality has been achieved through modular derivatisation of antibodies, light-emitting diodes or viral vectors. In living cells, SpyTag allowed imaging of protein trafficking, retargeting of CAR-T cell killing, investigation of heart contraction, and control of nucleosome position. The simple genetic encoding and rapid irreversible reaction provide diverse opportunities to enhance protein function. We describe limitations as well as future directions.

Generation of biparatopic antibody through two-step targeting of fragment antibodies on antigen using SpyTag and SpyCatcher

Biparatopic fragment antibodies can overcome deficiencies in avidity of conventional antibody fragments. Here, we describe a technology for generating biparatopic antibodies through two-step targeting using a pair of polypeptides, SpyTag and SpyCatcher, that spontaneously react to form a covalent bond between antibody fragments. In this method, two antibody fragments, each targeting different epitopes of the antigen, are fused to SpyTag and to SpyCatcher. When the two polypeptides are serially added to the antigen, their proximity on the antigen results in covalent bond formation and generation of a biparatopic antibody. We validated the system with purified recombinant antigen. Results in antigen-overexpressing cells were promising although further optimization will be required. Because this strategy results in high-affinity targeting with a bipartite molecule that has considerably lower molecular weight than an antibody, this technology is potentially useful for diverse applications.

Multifunctional streptavidin–biotin conjugates with precise stoichiometries

Multifunctional streptavidin-biotin conjugates with defined stoichiometry and number of open binding pockets provide molecularly precise alternatives to the statistical mixture of products that typically forms.

A generic cell surface ligand system for studying cell-cell recognition

Dose-response experiments are a mainstay of receptor biology studies and can reveal valuable insights into receptor function. Such studies of receptors that bind cell surface ligands are currently limited by the difficulty in manipulating the surface density of ligands at a cell–cell interface. Here, we describe a generic cell surface ligand system that allows precise manipulation of cell surface ligand densities over several orders of magnitude. These densities are robustly quantifiable, a major advance over previous studies. We validate the system for a range of immunoreceptors, including the T-cell receptor (TCR), and show that this generic ligand stimulates via the TCR at a similar surface density as its native ligand. We also extend our work to the activation of chimeric antigen receptors. This novel system allows the effect of varying the surface density, valency, dimensions, and affinity of the ligand to be investigated. It can be readily broadened to other receptor–cell surface ligand interactions and will facilitate investigation into the activation of, and signal integration between, cell surface receptors.

This study describes a generic cell-surface ligand system that allows precise manipulation of ligand densities, valency, dimensions, and affinity. The system is validated for a range of immunoreceptors, including the T-cell receptor, and can be readily broadened to other cell-surface receptor-ligand interactions.

Molecular determinants of the Ska-Ndc80 interaction and their influence on microtubule tracking and force-coupling

Errorless chromosome segregation requires load-bearing attachments of the plus ends of spindle microtubules to chromosome structures named kinetochores. How these end-on kinetochore attachments are established following initial lateral contacts with the microtubule lattice is poorly understood. Two microtubule-binding complexes, the Ndc80 and Ska complexes, are important for efficient end-on coupling and may function as a unit in this process, but precise conditions for their interaction are unknown. Here, we report that the Ska-Ndc80 interaction is phosphorylation-dependent and does not require microtubules, applied force, or several previously identified functional determinants including the Ndc80-loop and the Ndc80-tail. Both the Ndc80-tail, which we reveal to be essential for microtubule end-tracking, and Ndc80-bound Ska stabilize microtubule ends in a stalled conformation. Modulation of force-coupling efficiency demonstrates that the duration of stalled microtubule disassembly predicts whether a microtubule is stabilized and rescued by the kinetochore, likely reflecting a structural transition of the microtubule end.

Surface display of classical swine fever virus E2 glycoprotein on gram-positive enhancer matrix (GEM) particles via the SpyTag/SpyCatcher system

The E2 envelope protein is the main protective antigen of classical swine fever virus (CSFV). Importantly, gram-positive enhancer matrix (GEM) particles can work as an immunostimulant and/or carrier system to improve the immune effect of antigens. In this study, the artificially designed E2-Spy was expressed and glycosylated in Pichia pastoris, and subsequently conjugated with SpyCatcher-PA which was expressed in Escherichia coli. The conjugated E2-Spy-PA was displayed on the surface of GEM particles, generating the E2-Spy-PA-GEM complex. Blocking ELISA analysis and neutralization assays showed that both E2-Spy and E2-Spy-PA-GEM complexes induced high levels of anti-CSFV antibodies in mice. Furthermore, statistical analyses indicated that the E2-Spy-PA-GEM complex exhibited enhanced immunogenicity compared with E2-Spy alone.

Spy&Go purification of SpyTag-proteins using pseudo-SpyCatcher to access an oligomerization toolbox

Peptide tags are a key resource, introducing minimal change while enabling a consistent process to purify diverse proteins. However, peptide tags often provide minimal benefit post-purification. We previously designed SpyTag, forming an irreversible bond with its protein partner SpyCatcher. SpyTag provides an easy route to anchor, bridge or multimerize proteins. Here we establish Spy&Go, enabling protein purification using SpyTag. Through rational engineering we generated SpyDock, which captures SpyTag-fusions and allows efficient elution. Spy&Go enabled sensitive purification of SpyTag-fusions from Escherichia coli, giving superior purity than His-tag/nickel-nitrilotriacetic acid. Spy&Go allowed purification of mammalian-expressed, N-terminal, C-terminal or internal SpyTag. As an oligomerization toolbox, we established a panel of SpyCatcher-linked coiled coils, so SpyTag-fusions can be dimerized, trimerized, tetramerized, pentamerized, hexamerized or heptamerized. Assembling oligomers for Death Receptor 5 stimulation, we probed multivalency effects on cancer cell death. Spy&Go, combined with simple oligomerization, should have broad application for exploring multivalency in signaling.

Modular functionalization of crystalline graphene by recombinant proteins: a nanoplatform for probing biomolecules

Graphene, as well as other two-dimensional materials, is a promising candidate for use in bioimaging, therapeutic drug delivery, and bio-sensing applications. Here, we developed a protocol to functionalize graphene with recombinant proteins using genetically encoded SpyTag-SpyCatcher chemistry. SpyTag forms a covalent isopeptide bond with its genetically encoded partner SpyCatcher through spontaneous amidation under physiological conditions. The functionalization protocol developed is based on the use of short proteins as a linker, where two graphene-binding-peptides (GBPs) are attached to both ends of SpyTag (referred to as GStG), followed by the covalent conjugation with SpyCatcher-fusion proteins. The proposed method enables the decoration of crystalline graphene with various proteins, such as fluorescent proteins and affibody molecules that bind to cancerous cells. This scheme, which takes advantage of the cleanness of single-crystal graphene and the robustness of SpyTag-SpyCatcher chemistry, provides a versatile platform on which to study the biomolecule-surface and cell-substrate interactions and, indeed, may lead to a new way of designing biomedical devices. The interaction between peptides and graphene was clearly shown using molecular dynamics simulation and proven using specially designed experiments.

New Routes and Opportunities for Modular Construction of Particulate Vaccines: Stick, Click, and Glue

Vaccines based on virus-like particles (VLPs) can induce potent B cell responses. Some non-chimeric VLP-based vaccines are highly successful licensed products (e.g., hepatitis B surface antigen VLPs as a hepatitis B virus vaccine). Chimeric VLPs are designed to take advantage of the VLP framework by decorating the VLP with a different antigen. Despite decades of effort, there have been few licensed chimeric VLP vaccines. Classic approaches to create chimeric VLPs are either genetic fusion or chemical conjugation, using cross-linkers from lysine on the VLP to cysteine on the antigen. We describe the principles that make these classic approaches challenging, in particular for complex, full-length antigens bearing multiple post-translational modifications. We then review recent advances in conjugation approaches for protein-based non-enveloped VLPs or nanoparticles, to overcome such challenges. This includes the use of strong non-covalent assembly methods (stick), unnatural amino acids for bio-orthogonal chemistry (click), and spontaneous isopeptide bond formation by SpyTag/SpyCatcher (glue). Existing applications of these methods are outlined and we critically consider the key practical issues, with particular insight on Tag/Catcher plug-and-display decoration. Finally, we highlight the potential for modular particle decoration to accelerate vaccine generation and prepare for pandemic threats in human and veterinary realms.

The synthesis of a smart streptavidin-functionalized poly(N-isopropylacrylamide) composite and its application in the separation and detection of virus nucleic acid

A new kind of polymeric material (PNIPAAm-co-SA) was prepared by conjugating a thermosensitive polymer, Poly (N-isopropylacrylamide) (PNIPAAm) with streptavidin (SA). This smart prepared composite displayed a controllable conformation change between an expanded and a collapsed form, below or above its lower critical solution temperature (LCST). Differential scanning calorimetry (DSC) analysis demonstrated that the PNIPAAm-co-SA bioconjugate showed the same LCST as the original synthetic polymer, PNIPAAm, which was also 32°C. Based on the specific interaction between SA and biotin, a higher capture efficiency of PNIPAAm-co-SA, which was almost 100% in PBS buffer solution and above 70% in serum was obtained, respectively. And the high affinity between PNIPAAm-co-SA and biotin was still maintained after three heating cycles. Subsequently, the variola virus (small pox, VV) oligonucleotide sequence was chosen as a model to demonstrate the sensitivity of the biosensor which was fabricated based on PNIPAAm-co-SA. The biosensor exhibited the ability to separate and enrich targets from complicated system with its phase transition ability, and high sensitivity toward VV-targets were achieved. Moreover, other types of targets such as proteins and cells, could be detected by changing the biotin-captures, which indicated the broad applicability of biosensors based on this smart polymer material.

Multivalency of NDC80 in the outer kinetochore is essential to track shortening microtubules and generate forces

Presence of multiple copies of the microtubule-binding NDC80 complex is an evolutionary conserved feature of kinetochores, points of attachment of chromosomes to spindle microtubules. This may enable multivalent attachments to microtubules, with implications that remain unexplored. Using recombinant human kinetochore components, we show that while single NDC80 complexes do not track depolymerizing microtubules, reconstituted particles containing the NDC80 receptor CENP-T bound to three or more NDC80 complexes do so effectively, as expected for a kinetochore force coupler. To study multivalency systematically, we engineered modules allowing incremental addition of NDC80 complexes. The modules’ residence time on microtubules increased exponentially with the number of NDC80 complexes. Modules with two or more complexes tracked depolymerizing microtubules with increasing efficiencies, and stalled and rescued microtubule depolymerization in a force-dependent manner when conjugated to cargo. Our observations indicate that NDC80, rather than through biased diffusion, tracks depolymerizing microtubules by harnessing force generated during microtubule disassembly.

Before a cell divides, its genome duplicates so that each copy can be given to the daughter cells. In a dividing cell, the chromosomes – the structures that store genetic information – look like an ‘X’. This is because each chromosome is formed of two identical, rod-like, ‘sister chromatids’ which are attached by their middle. Each daughter cell should inherit one of the chromatids.

As division progresses, both sister chromatids in a pair fasten to ‘microtubules’, string-like structures made of a large number of identical proteins stacked together. These strings attach each chromatids to opposite sides of the cell. Then, the ends of the microtubules that bind to a chromatid start to peel off and disassemble. The microtubules get shorter and shorter, which creates a force that pulls the chromatids apart.

Microtubules latch on a chromatid via a large structure known as the kinetochore, which has tether-like protein complexes called NDC80 at its surface. NDC80 links the kinetochore with the microtubules, yet little is known about this connection. In particular, it is unclear how this complex relays the forces from the shortening microtubules to the chromatids, and how many NDC80 complexes are required for this process.

To study how these proteins interact without any molecular background ‘noise’ from the cell, Volkov, Huis in ‘t Veld et al. engineered simplified versions of the microtubule-kinetochore-NDC80 connection using components of human kinetochores. These versions, named ‘modules’, contained different numbers of NDC80 complexes, from one to four copies.

Volkov, Huis in ‘t Veld et al. found that single NDC80 complexes did not follow the microtubules as they shortened, while the connections with two or more NDC80 complexes did. When a few modules, each with two or three NDC80s, were closeby, they also bound to the end of the same shortening microtubule, and captured more force as a team. NDC80 complexes therefore work together to connect to microtubule ends and harness their energy.

The artificial kinetochore-microtubule-NDC80 connections developed by Volkov, Huis in ‘t Veld et al. provides a new method to study how cells divide, and it could reveal how other proteins and biological processes participate in this mechanism. It could also help understand how chromatids are kept from separating incorrectly during division, which is an error that could be fatal for the cell.

SpyCatcher-SpyTag mediated in situ labelling of progeny baculovirus with quantum dots for tracking viral infection in living cells

A non-invasive labelling strategy is proposed to label baculovirus via genetic insertion of a SpyTag into the viral glycoprotein, followed by specific conjugation with the SpyCatcher protein on modified quantum dots (QDs) through an isopeptide bond. The labelling method is convenient and efficient and shows little attenuation of viral infectivity. Therefore, it is a biologically compatible technique for tracking viral infection.

Ferritin-based drug delivery systems: Hybrid nanocarriers for vascular immunotargeting

Ferritin subunits of heavy and light polypeptide chains self-assemble into a spherical nanocage that serves as a natural transport vehicle for metals but can include diverse cargoes. Ferritin nanoparticles are characterized by remarkable stability, small and uniform size. Chemical modifications and molecular re-engineering of ferritin yield a versatile platform of nanocarriers capable of delivering a broad range of therapeutic and imaging agents. Targeting moieties conjugated to the ferritin external surface provide multivalent anchoring of biological targets. Here, we highlight some of the current work on ferritin as well as examine potential strategies that could be used to functionalize ferritin via chemical and genetic means to enable its utility in vascular drug delivery.

Multicomponent self-assembly as a tool to harness new properties from peptides and proteins in material design

Nature is enriched with a wide variety of complex, synergistic and highly functional protein-based multicomponent assemblies.

B12-dependent photoresponsive protein hydrogels for controlled stem cell/protein release

Thanks to the precise control over their structural and functional properties, genetically engineered protein-based hydrogels have emerged as a promising candidate for biomedical applications. Given the growing demand for creating stimuli-responsive "smart" hydrogels, here we show the synthesis of entirely protein-based photoresponsive hydrogels by covalently polymerizing the adenosylcobalamin (AdoB₁₂)-dependent photoreceptor C-terminal adenosylcobalamin binding domain (CarH_C) proteins using genetically encoded SpyTag-SpyCatcher chemistry under mild physiological conditions. The resulting hydrogel composed of physically self-assembled CarH_C polymers exhibited a rapid gel-sol transition on light exposure, which enabled the facile release/recovery of 3T3 fibroblasts and human mesenchymal stem cells (hMSCs) from 3D cultures while maintaining their viability. A covalently cross-linked CarH_C hydrogel was also designed to encapsulate and release bulky globular proteins, such as mCherry, in a light-dependent manner. The direct assembly of stimuli-responsive proteins into hydrogels represents a versatile strategy for designing dynamically tunable materials.

Autocatalytic association of proteins by covalent bond formation: a Bio Molecular Welding toolbox derived from a bacterial adhesin

Unusual intramolecular cross-links present in adhesins from Gram-positive bacteria have been used to develop a generic process amenable to biotechnology applications. Based on the crystal structure of RrgA, the Streptococcus pneumoniae pilus adhesin, we provide evidence that two engineered protein fragments retain their ability to associate covalently with high specificity, in vivo and in vitro, once isolated from the parent protein. We determined the optimal conditions for the assembly of the complex and we solved its crystal structure at 2 Å. Furthermore, we demonstrate biotechnological applications related to antibody production, nanoassembly and cell-surface labeling based on this process we named Bio Molecular Welding.

Design of a molecular support for cryo-EM structure determination

Despite the recent rapid progress in cryo-electron microscopy (cryo-EM), there still exist ample opportunities for improvement in sample preparation. Macromolecular complexes may disassociate or adopt nonrandom orientations against the extended air-water interface that exists for a short time before the sample is frozen. We designed a hollow support structure using 3D DNA origami to protect complexes from the detrimental effects of cryo-EM sample preparation. For a first proof-of-principle, we concentrated on the transcription factor p53, which binds to specific DNA sequences on double-stranded DNA. The support structures spontaneously form monolayers of preoriented particles in a thin film of water, and offer advantages in particle picking and sorting. By controlling the position of the binding sequence on a single helix that spans the hollow support structure, we also sought to control the orientation of individual p53 complexes. Although the latter did not yet yield the desired results, the support structures did provide partial information about the relative orientations of individual p53 complexes. We used this information to calculate a tomographic 3D reconstruction, and refined this structure to a final resolution of ∼15 Å. This structure settles an ongoing debate about the symmetry of the p53 tetramer bound to DNA.

Detection, phenotyping, and quantification of antigen-specific T cells using a peptide-MHC dodecamer

Here we report a peptide-MHC (pMHC) dodecamer as a "next generation" technology that is a significantly more sensitive and versatile alternative to pMHC tetramers for the detection, isolation, and phenotypic analysis of antigen-specific T cells. In particular, dodecamers are able to detect two- to fivefold more antigen-specific T cells in both human and murine CD4(+)and CD8(+)αβ T-cell compartments compared with the equivalent tetramers. The low-affinity, tetramer-negative, dodecamer-positive T cells showed comparable effector cytokine responses as those of high-affinity, tetramer-positive T cells. Dodecamers are able to detect early stage CD4(+)CD8(+)double-positive thymocytes on which T-cell receptors are 10- to 30-fold less dense than mature T cells. Dodecamers also show utility in the analysis of γδ T cells and in cytometry by time-of-flight applications. This construct has a simple structure with a central scaffold protein linked to four streptavidin molecules, each having three pMHC ligands or other molecules. The dodecamer is straightforward and inexpensive to produce and is compatible with current tetramer technology and commercially available streptavidin conjugates.

Programmable polyproteams built using twin peptide superglues

Programmed connection of amino acids or nucleotides into chains introduced a revolution in control of biological function. Reacting proteins together is more complex because of the number of reactive groups and delicate stability. Here we achieved sequence-programmed irreversible connection of protein units, forming polyprotein teams by sequential amidation and transamidation. SpyTag peptide is engineered to spontaneously form an isopeptide bond with SpyCatcher protein. By engineering the adhesin RrgA from Streptococcus pneumoniae, we developed the peptide SnoopTag, which formed a spontaneous isopeptide bond to its protein partner SnoopCatcher with >99% yield and no cross-reaction to SpyTag/SpyCatcher. Solid-phase attachment followed by sequential SpyTag or SnoopTag reaction between building-blocks enabled iterative extension. Linear, branched, and combinatorial polyproteins were synthesized, identifying optimal combinations of ligands against death receptors and growth factor receptors for cancer cell death signal activation. This simple and modular route to programmable "polyproteams" should enable exploration of a new area of biological space.

Artificial supramolecular protein assemblies as functional high-order protein scaffolds

Artificial supramolecular protein assemblies can serve as novel high-order scaffolds that can display various functional proteins with defined valencies and organization, offering unprecedented functional bio-architectures.

Synthetic Biology: A New Tool for the Trade

Protein-protein interactions are fundamental to many biological processes. Yet, the weak and transient noncovalent bonds that characterize most protein-protein interactions found in nature impose limits on many bioengineering experiments. Here, a new class of genetically encodable peptide-protein pairs--isopeptag-N/pilin-N, isopeptag/pilin-C, and SpyTag/SpyCatcher--that interact through autocatalytic intermolecular isopeptide bond formation is described. Reactions between peptide-protein pairs are specific, robust, orthogonal, and able to proceed under most biologically relevant conditions both in vitro and in vivo. As fusion constructs, they provide a handle on molecules of interest, both organic and inorganic, that can be grasped with an iron grip. Such stable interactions provide robust post-translational control over biological processes and open new opportunities in synthetic biology for engineering programmable and self-assembling protein nanoarchitectures.

Engineered catalytic biofilms: Site-specific enzyme immobilization onto E. coli curli nanofibers

Biocatalytic transformations generally rely on purified enzymes or whole cells to perform complex transformations that are used on industrial scale for chemical, drug, and biofuel synthesis, pesticide decontamination, and water purification. However, both of these systems have inherent disadvantages related to the costs associated with enzyme purification, the long-term stability of immobilized enzymes, catalyst recovery, and compatibility with harsh reaction conditions. We developed a novel strategy for producing rationally designed biocatalytic surfaces based on Biofilm Integrated Nanofiber Display (BIND), which exploits the curli system of E. coli to create a functional nanofiber network capable of covalent immobilization of enzymes. This approach is attractive because it is scalable, represents a modular strategy for site-specific enzyme immobilization, and has the potential to stabilize enzymes under denaturing environmental conditions. We site-specifically immobilized a recombinant α-amylase, fused to the SpyCatcher attachment domain, onto E. coli curli fibers displaying complementary SpyTag capture domains. We characterized the effectiveness of this immobilization technique on the biofilms and tested the stability of immobilized α-amylase in unfavorable conditions. This enzyme-modified biofilm maintained its activity when exposed to a wide range of pH and organic solvent conditions. In contrast to other biofilm-based catalysts, which rely on high cellular metabolism, the modified curli-based biofilm remained active even after cell death due to organic solvent exposure. This work lays the foundation for a new and versatile method of using the extracellular polymeric matrix of E. coli for creating novel biocatalytic surfaces.