Porous Phosphorescent Coordination Polymers for Oxygen Sensing

Dopants Induce Persistent Room Temperature Phosphorescence in Triarylamine Boronate Esters

Purely organic materials exhibiting room temperature phosphorescence (RTP) are promising candidates for oxygen sensors and information encryption owing to their cost-effective and environmentally friendly nature. Herein, we report a bimolecular RTP system where DTBU acts as the guest and TBBU serves as the host. In contrast to previously reported results, we find that both pure DTBU and TBBU do not exhibit RTP in the solid state even under N2 atmosphere. A DTBU/TBBU system with a low doping ratio (0.1 mol %) exhibits persistent yellowish-green afterglow with a lifetime of 340 ms and is highly sensitive to oxygen. A DTBU/TBBU system with a higher doping ratio (10 mol %) maintains a phosphorescence lifetime of 179 ms under air. Applications of DTBU/TBBU at varied doping ratios in both oxygen sensing and information encryption are demonstrated. We propose that the T1 state of TBBU acts as an energy transfer intermediate between Tn and T1 of DTBU, ultimately leading to the generation of persistent RTP. Overall, this work demonstrates the critical importance of material purity in the design of RTP systems, and how an understanding of host-guest doping enables their photophysical properties to be precisely tuned.

In-plane oxygen diffusion measurements in polymer films using time-resolved imaging of programmable luminescent tags

Oxygen diffusion properties in thin polymer films are key parameters in industrial applications from food packaging, over medical encapsulation to organic semiconductor devices and have been continuously investigated in recent decades. The established methods have in common that they require complex pressure-sensitive setups or vacuum technology and usually do not come without surface effects. In contrast, this work provides a low-cost, precise and reliable method to determine the oxygen diffusion coefficient D in bulk polymer films based on tracking the phosphorescent pattern of a programmable luminescent tag over time. Our method exploits two-dimensional image analysis of oxygen-quenched organic room-temperature phosphors in a host polymer with high spatial accuracy. It avoids interface effects and accounts for the photoconsumption of oxygen. As a role model, the diffusion coefficients of polystyrene glasses with molecular weights between 13k and 350k g/mol are determined to be in the range of (0.8-1.5) × 10-7 cm2/s, which is in good agreement with previously reported values. We finally demonstrate the reduction of the oxygen diffusion coefficient in polystyrene by one quarter upon annealing above its glass transition temperature.

A Doped Lanthanide-Based Coordination Polymer Exhibiting High Relative Sensitivity to Ratiometric Luminescent Thermometers at 440 K

Ratiometric luminescent thermometers with excellent performance often require the luminescent materials to possess high thermal stability and relative sensitivity (Sr). However, such luminescent materials are very rare, especially in physiological (298-323 K) and high-temperature (>373 K) regions. Here we report the synthesis and luminescent property of [Tb0.995Eu0.005(pfbz)2(phen)Cl] (3), which not only exhibits high Sr in physiological temperature but also has a Sr up to 7.47% K-1 at 440 K, the largest Sr at 440 K in known lanthanide-based coordination compound luminescent materials.

Cd(II)/Mn(II)/Co(II)/Ni(II)/Zn(II) Coordination Polymers Built from Dicarboxylic Acid/Tetracarboxylic Acid Ligands: Their Structural Diversity and Fluorescence Properties

Six Cd(II)/Mn(II)/Co(II)/Ni(II)/Zn(II) coordination complexes are formulated as [Cd₂(X^2-)₂(μ₃-O)_2/3]_n (1), [Mn₂(X^2-)₂(μ₃-O)_2/3]_n (2), {[Co_1.5(Y^4-)_0.5(4,4'-bpy)_1.5(OH^-)]·2H₂O}_n (3), {[Ni(X^2-)(4,4'-bpy)(H₂O)₂]·4H₂O}_n (4), [Zn(m-bdc^2-)(bebiyh)]_n (5), and [Cd(5-tbia^2-)(bebiyh)]_n (6) (H₂X = 3,3'-(2,3,5,6-tetramethyl-1,4-phenylene) dipropionic acid. H₄Y = 2,2'-(2,3,5,6-tetramethyl-1,4-phenylene)bis(methylene) dimalonic acid, bebiyh = 1,6-bis(2-ethyl-1H-benzo[d]imidazol-1-yl)hexane, m-H₂bdc = 1,3-benzenedicarboxylic acid, and 5-H₂tbia = 5-(tert-butyl)isophthalic acid) were obtained by hydrothermal reactions and structurally characterized. Complexes 1 and 2 have a 6-connected 3D architecture and with several point symbols of (3⁶·4⁶·5³). Complex 3 features a 5-connected 3D net structure with a point symbol of (5·6⁹). Complex 4 possesses a 4-connected 2D net with a vertex symbol of (4⁴·6²). Complex 5 is a 3-connected 2D network with a point symbol of (6³). Complex 6 is a (3,3)-connected 2D network with a point symbol of (6³)₂. In addition, complexes 1 and 4 present good photoluminescence behaviors. The electronic structures of 1 and 4 were investigated with the density functional theory (DFT) method to understand the photoluminescence behaviors.

Utilizing Metal-Thiocatecholate Functionalized UiO-66 Framework for Photocatalytic Hydrogen Evolution Reaction

Exploiting clean energy is essential for sustainable development and sunlight-driven photocatalytic water splitting represents one of the most promising approaches toward this goal. Metal-organic frameworks (MOFs) are competent photocatalysts owing to their tailorable functionality, well-defined structure, and high porosity. Yet, the introduction of the unambiguous metal-centered active site into MOFs is still challenging since framework motifs capable of anchoring metal ions firmly are lacking. Herein, the assembly using 1,4-dicarboxylbenzene-2,3-dithiol (H₂ dcbdt) and Zr-Oxo clusters to give a thiol-functionalized UiO-66 type framework, UiO-66-dcbdt, is reported. The thiocatechols on the struts are allowed to capture transition metal (TM) ions to generate UiO-66-dcbdt-M (M  = Fe, Ni, Cu) with unambiguous metal-thiocatecholate moieties for photocatalytic hydrogen evolution reaction (HER). UiO-66-dcbdt-Cu is found the best catalyst exhibiting an HER rate of 4.18 mmol g^-1  h^-1  upon irradiation with photosensitizing Ru-polypyridyl complex. To skip the use of the external sensitizer, UiO-66-dcbdt-Cu is heterojunctioned with titanium dioxide (TiO₂ ) and achieves an HER rate of 12.63 mmol g^-1  h^-1  (32.3 times that of primitive TiO₂ ). This work represents the first example of MOF assembly employing H₂ dcbdt as the mere linker followed by chelation with TM ions and undoubtedly fuels the rational design of MOF photocatalysts bearing well-defined active sites.

Ratiometric oxygen sensors of cyclometalated iridium(III) with enhanced quantum yields and variable dynamic ranges

Four luminescent ratiometric oxygen sensors, pairing phosphorescent cyclometalated iridium with coumarin or BODIPY fluorophores, are presented here. These compounds realize three key improvements over our previous designs, namely higher phosphorescence quantum yields, the ability to access intermediate dynamic ranges better suited for typical atmospheric O₂ levels, and the possibility of using visible excitation instead of UV. These ratiometric sensors are accessed via very simple, 1-step syntheses involving direct reaction of the chloro-bridged cyclometalated iridium dimer with the pyridyl-substituted fluorophore. They have phosphorescent quantum yields up to 29% with short to intermediate phosphoresence lifetimes ranging from 1.7 to 5.3 μs in three of the sensors, with the fourth having a long lifetime of 440 μs that is very responsive to oxygen. In one case, visible excitation of 430 nm is used to provide dual emission instead of UV excitation.

Synthesis, Molecular, and Supramolecular Structures of Two Azide-Bridged Cd(II) and Cu(II) Coordination Polymers

Two 1D coordination polymers were synthesized by reaction of two ligands, 2-amino-4-picoline (2A4Pic) and quinoline-6-carboxylic acid (Qu-6-COOH) with two metal (II) nitrate (M = Cd and Cu) in the presence of azide as a linker. The synthesized metal complexes [Cd(2A4Pic)2(N3)2]n; (1) and [Cu(Qu-6-COO)(N3)(H2O)]n; (2) were isolated in single crystals and their X-ray structures revealed a 1D polymeric structure. Due to symmetry considerations, the asymmetric formula is half a [Cd(2A4Pic)2(N3)2] unit for 1 and one [Cu(Qu-6-COO)(N3)(H2O)] unit for 2. In complex 1, the Cd(II) is hexa-coordinated with two 2A4Pic molecules and four μ(1,1) azide units. Hence, the CdN6 coordination environment has a slightly distorted octahedral geometry. In 2, the Cu(II) is hexa-coordinated with three different ligands (Qu-6-COO¯, H2O and μ(1,1) N3¯) where all are connectors between the crystallographically related Cu(II) sites. Additionally, complex 2 distorted CuN2O4 octahedral geometry. In both complexes, the polymer arrays are connected by N…H hydrogen bonds and π–π stacking interactions. Based on Hirshfeld analysis, the percentages of N…H contacts are 43.1 and 27.4% for 1 and 2, respectively, while %C...C are 5.6 and 9.3%, respectively. Analysis of Cu-N, Cu-O, and Cd-N bonds using DFT calculations showed predominantly closed-shell coordination interactions with little covalent characters. Additionally, the negatively charged ligand groups were found to compensate the positive charge of the central metal ion to a larger extent than the electrically neutral ligands.

Afterglow/Fluorescence Dual-Emissive Ratiometric Oxygen Probe for Tumor Hypoxia Imaging

Hypoxia is a common feature of many diseases such as solid tumors. The measurement and imaging of oxygen (O₂) are extremely important for disease diagnosis and therapy evaluation. In this work, the afterglow/fluorescence dual-emissive ratiometric O₂ probe based on a photochemical reaction-based afterglow system is reported. The afterglow is highly sensitive to O₂ because the O₂ content is directly related to the ¹O₂ yield and eventually affects the afterglow intensity. The O₂-insensitive fluorescence of an emitter can serve as an internal reference. As the O₂ concentration changes from 0.08 to 18.5 mg L^-1, the ratio value shows a remarkable 53-fold increase. Compared with the intensity of a single peak, the ratiometric signal can eliminate the interference of the probe concentration to achieve higher accuracy. This afterglow/fluorescence dual-emissive ratiometric O₂ probe is successfully applied to hypoxia imaging in tumor-bearing mice, which may further promote the development of O₂ sensing in the biomedical field.

Efficient room-temperature phosphorescence of covalent organic frameworks through covalent halogen doping

Organic room-temperature phosphorescence, a spin-forbidden radiative process, has emerged as an interesting but rare phenomenon with multiple potential applications in optoelectronic devices, biosensing and anticounterfeiting. Covalent organic frameworks (COFs) with accessible nanoscale porosity and precisely engineered topology can offer unique benefits in the design of phosphorescent materials, but these are presently unexplored. Here, we report an approach of covalent doping, whereby a COF is synthesized by copolymerization of halogenated and unsubstituted phenyldiboronic acids, allowing for random distribution of functionalized units at varying ratios, yielding highly phosphorescent COFs. Such controlled halogen doping enhances the intersystem crossing while minimizing triplet-triplet annihilation by diluting the phosphors. The rigidity of the COF suppresses vibrational relaxation and allows a high phosphorescence quantum yield (Φ_Phos ≤ 29%) at room temperature. The permanent porosity of the COFs and the combination of the singlet and triplet emitting channels enable a highly efficient COF-based oxygen sensor, with an ultra-wide dynamic detection range (~10³-10^-5 torr of partial oxygen pressure).

High Intrinsic Phosphorescence Efficiency and Density Functional Theory Modeling of Ru(II)-Bipyridine Complexes with π-Aromatic-Rich Cyclometalated Ligands: Attributions of Spin-Orbit Coupling Perturbation and Efficient Configurational Mixing of Singlet Excited States

A series of π-aromatic-rich cyclometalated ruthenium(II)-(2,2'-bipyridine) complexes ([Ru(bpy)2(πAr-CM)]+) in which πAr-CM is diphenylpyrazine or 1-phenylisoquinoline were prepared. The [Ru(bpy)2(πAr-CM)]+ complexes had remarkably high phosphorescence rate constants, k RAD(p), and the intrinsic phosphorescence efficiencies (ιem(p) = k RAD(p)/(νem(p))3) of these complexes were found to be twice the magnitudes of simply constructed cyclometalated ruthenium(II) complexes ([Ru(bpy)2(sc-CM)]+), where νem(p) is the phosphorescence frequency and sc-CM is 2-phenylpyridine, benzo[h]quinoline, or 2-phenylpyrimidine. Density functional theory (DFT) modeling of the [Ru(bpy)2(CM)]+ complexes indicated numerous singlet metal-to-ligand charge transfers for 1MLCT-(Ru-bpy) and 1MLCT-(Ru-CM), excited states in the low-energy absorption band and 1ππ*-(aromatic ligand) (1ππ*-LAr) excited states in the high-energy band. DFT modeling of these complexes also indicated phosphorescence-emitting state (Te) configurations with primary MLCT-(Ru-bpy) characteristics. The variation in ιem(p) for the spin-forbidden Te (3MLCT-(Ru-bpy)) excited state of the complex system that was examined in this study can be understood through the spin-orbit coupling (SOC)-mediated sum of intensity stealing (∑SOCM-IS) contribution from the primary intensity of the low-energy 1MLCT states and second-order intensity perturbation from the significant configuration between the low-energy 1MLCT and high-energy intense 1ππ*-LAr states. In addition, the observation of unusually high ιem(p) magnitudes for these [Ru(bpy)2(πAr-CM)]+ complexes can be attributed to the values for both intensity factors in the ∑SOCM-IS formalism being individually greater than those for [Ru(bpy)2(sc-CM)]+ ions.

Vapor-Induced Conversion of a Centrosymmetric Organic-Inorganic Hybrid Crystal into a Proton-Conducting Second-Harmonic-Generation-Active Material

Chemical responsivity in materials is essential to build systems with switchable functionalities. However, polarity-switchable materials are still rare because inducing a symmetry breaking of the crystal structure by adsorbing chemical species is difficult. In this study, we demonstrate that a molecular organic-inorganic hybrid crystal of (NEt₄)₂[MnN(CN)₄] (1) undergoes polarity switching induced by water vapor and transforms into a rare example of proton-conducting second-harmonic-generation-active material. Centrosymmetric 1 transforms into noncentrosymmetric polar 1·3H₂O and 1·MeOH by accommodating water and methanol molecules, respectively. However, only water vapor causes a spontaneous single-crystal-to-single-crystal transition. Moreover, 1·3H₂O shows proton conduction with 2.3 × 10^-6 S/cm at 298 K and a relative humidity of 80%.

Tailored Inorganic-Organic Architectures via Metalloligands

This article discusses the design principles and strategies and the structural outcome of various supramolecular architectures constructed by utilizing well-defined coordination complexes as the metalloligands. We have included selected examples of metalloligands, offering either pyridyl or arylcarboxylic acid groups as the appended functional groups, for illustrating the construction of their supramolecular architectures. Both geometrical position and the number of the appended functional groups emerging from a metalloligand were found to critically regulate the structural aspects and dimensionality of the resultant material. The article concludes by delineating the structure-directing lessions as well as the potential applications of the metalloligand-based supramolecular architectures for the generation of next-level materials.

Porous matrix materials in optical sensing of gaseous oxygen

The review provides comparison of porous materials that act as a matrix for luminescent oxygen indicators. These include silica-gels, sol–gel materials based on silica and organically modified silica (Ormosils), aerogels, electrospun polymeric nanofibers, metal–organic frameworks, anodized alumina, and various other microstructured sensor matrices. The influence of material structure and composition on the efficiency of oxygen quenching and dynamic response times is compared and the advantages and disadvantages of the materials are summarized to give a guide for design and practical application of sensors with desired sensitivity and response time.

Multivariate Strategy Preparation of Nanoscale Ru-Doped Metal-Organic Frameworks with Boosted Photoactivity for Bioimaging and Reactive Oxygen Species Generation

How to incorporate chromophores into MOFs is a key for the development of multifunctional photoactive systems. The poor internalization by cancer cells and low efficiency of ROS generation hamper the potential clinic application of Ru-based molecular agents. In this work, a nanoscale Ru-doped metal-organic framework Hf-UiO-Ru (Hf-Ru) with framework-boosted photoactivities was prepared via a multivariate strategy for use in bioimaging and ROS generation. The as-synthesized Hf-Ru nanocrystals not only maintain the well regular morphology and crystal structure in comparison with that of the Hf-UiO-66 prototype but also give an oxygen-independent emission with a much longer lifetime, higher quantum yield, and stronger ROS generation than molecular Ru(dcbpy)₃. Additionally, the enhanced cellular uptake and high brightness in fluorescence and CT imaging of Hf-Ru nanocrystals have also been well studied in vitro. This multivariate strategy may be utilized as a general paradigm to develop a photoactive nanosystem for bioimaging and cancer treatment.

Selective luminescent sensing of metal ions and nitroaromatics over a porous mixed-linker cadmium(ii) based metal–organic framework

A potential luminescent sensor based on porous metal organic framework for the detection of metal ions (Al3+, Fe3+ or Cr3+) and nitro-explosive, 2,4,6-tri-nitrophenol has been discovered. MOF is capable of detecting aqueous phase analyte through luminescent sensing.

Encapsulating NH4Br in a metal organic framework: achieving remarkable proton conduction in a wide relative humidity range

Proton-conducting materials are key components for constructing high-energy-density electronic devices. In this work, by accumulating NH₄Br into the nanospace of the classical metal organic framework MIL-101-Cr, a proton conductivity as high as 1.53 × 10^-1 S cm^-1 was achieved at 363 K and 100% RH. The proton conduction of NH₄Br@MIL-101-Cr was also high even at lower relative humidity; for instance, it was ∼10^-2 S cm^-1 at 75% RH. The activation energy was calculated to be 0.11 eV for NH₄Br@MIL-101-Cr, indicative of tight H-bond networks and a low barrier to proton transfer, and confirming the occurrence of pure proton conduction as well.

Construction of a mixed ligand MOF as "green catalyst" for the photocatalytic degradation of organic dye in aqueous media

In the past few years, metal-organic frameworks (MOFs) have emerged as a class of fascinating materials for photocatalysis. Herein, a new MOF formulated as [Zn(bpe)(fdc)]·2DMF (BUT-206, bpe = 1,2-bis(4-pyridyl) ethylene, H2fdc = 2,5-furan dicarboxylic acid, DMF = N,N-dimethylformamide) is reported, which was synthesized under solvothermal conditions and applied for photocatalytic degradation of dyes (crystal violet and rhodamine B). Noteworthily, BUT-206 exhibited high photocatalytic activity toward the degradation of crystal violet without using any photosensitizer or cocatalyst under UV-irradiation. The photocatalytic degradation of crystal violet by BUT-206 was effective with a degradation efficiency of 92.5% within 120 minutes. The effects of key parameters including pH, amount of photocatalyst and initial concentration of dye on the dye degradation processes were examined, and the kinetics of dye degradation was established by the pseudo-first order kinetic equation. Furthermore, BUT-206 showed good cyclic stability in photocatalytic performance for up to five regeneration cycles, making it a potential green catalyst for dye degradation.

Metal-Organic Framework-Based Stimuli-Responsive Polymers

Metal-organic framework (MOF) based stimuli-responsive polymers (coordination polymers) exhibit reversible phase-transition behavior and demonstrate attractive properties that are capable of altering physical and/or chemical properties upon exposure to external stimuli, including pH, temperature, ions, etc., in a dynamic fashion. Thus, their conformational change can be imitated by the adsorption/desorption of target analytes (guest molecules), temperature or pressure changes, and electromagnetic field manipulation. MOF-based stimuli responsive polymers have received great attention due to their advanced optical properties and variety of applications. Herein, we summarized some recent progress on MOF-based stimuli-responsive polymers (SRPs) classified by physical and chemical responsiveness, including temperature, pressure, electricity, pH, metal ions, gases, alcohol and multi-targets.

Near-IR Charge-Transfer Emission at 77 K and Density Functional Theory Modeling of Ruthenium(II)-Dipyrrinato Chromophores: High Phosphorescence Efficiency of the Emitting State Related to Spin-Orbit Coupling Mediation of Intensity from Numerous Low-Energy Singlet Excited States

Efficient charge-transfer (CT) phosphorescence in the near-IR (NIR) spectral region is reported for four substituted Ru-(R-dipyrrinato) complexes, [Ru(bpy)₂(R-dipy)](PF₆), where bpy is 2,2'-bipyridine and the substituent R is phenyl (ph), 2,4,6-trimethylphenyl, 4-carboxyphenyl (HOOC-ph), or 4-pyridinyl. The experimentally determined phosphorescence efficiency, ι_em(p) = k_RAD(p)/(ν_em(p))³ (where k_RAD(p) and ν_em(p) are the phosphorescence rate constant and the phosphorescence frequency, respectively), of the [Ru(bpy)₂(R-dipy)]⁺ complexes was approximately double that of [Ru(bpy)(Am)₄]²⁺ complexes (Am = ammine ligand) in the NIR region. Density functional theory (DFT) modeling indicated two strikingly different electronic configurations of the triplet emitting state (T_e) in the two types of complexes. The T_e of [Ru(bpy)₂(R-dipy)]⁺ complexes shows a CT-type corresponding to the metal-to-ligand charge transfer (MLCT)-(Ru-(R-dipy)) and the ππ*-(R-dipy) moiety configurations, and the T_e state in the [Ru(bpy)(Am)₄]²⁺ complexes corresponds to an approximately MLCT excited state consisting of mostly MLCT-(Ru-bpy) with a minimal ππ*(bpy) contribution. DFT modeling also indicated that the low-energy singlet excited states in the T_e geometry (S_n(T)) of the [Ru(bpy)₂(ph-dipy)]⁺ complex consist of numerous CT-S_n(T)-type states of the Ru-dipy and Ru-bpy moieties, whereas the [Ru(bpy)(Am)₄]²⁺ ions show quite simple MLCT-S_n(T)-type states of the Ru-bpy moiety. Based on experimental observations, DFT modeling, and the plain spin-orbit coupling (SOC) principle, we conclude that the remarkably high ι_em(p) amplitudes of the [Ru(bpy)₂(R-dipy)]⁺ complexes relative to those of [Ru(bpy)(Am)₄]²⁺ complexes can be attributed to the relatively substantial contribution of intrinsic SOC-mediated intensity stealing from the numerous low-energy CT-type S_n(T) states.

Effective adsorption of mercury by Zr(IV)-based metal-organic frameworks of UiO-66-NH2 from aqueous solution

In this study, Zr-based metal-organic frameworks (MOFs) of UiO-66 and UiO-66-NH₂ were synthesized and applied to removal of mercury from aqueous solution. The characterizations of UiO-66 and UiO-66-NH₂ were examined by X-ray diffraction (XRD), scanning electron microscope (SEM), and thermogravimetric analysis (TGA). To investigate the adsorption properties of UiO-66-NH₂ for mercury, the experiments of kinetics, isotherm, pH, temperature, and salt concentration were conducted, and the results were compared with those by UiO-66. The result showed that UiO-66-NH₂ has a higher adsorption capacity for mercury than UiO-66. The maximum adsorption capacity of UiO-66-NH₂ was 223.8 ± 17.8 mg g^-1 at 313 K. The salt concentration of NaCl has a significant effect on the adsorption of mercury on UiO-66, while UiO-66-NH₂ can maintain the stable adsorption capacity for mercury in the concentration range of 0.1-0.5 M NaCl. Adsorption thermodynamics result indicated that the adsorption process of mercury on UiO-66-NH₂ was spontaneous and endothermic. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses showed that the mercury was successfully adsorbed on the surface of UiO-66-NH₂ and amino functional group as a soft base played a major role to react with mercury during the adsorption process. Graphical abstract.

Slight ligand modifications within multitopic linear hydroxamates promotes connectivity differences in Cu(ii) 1-D coordination polymers

Two novel hydroxamic acids have been used in constructing two 1-D coordination polymers. Slight structural differences promote connectivity changes upon Cu(ii) metalation as rationalised using DFT calculations and Hirschfeld surface analysis.

A novel multichromic Zn(II) cationic coordination polymer based on a new flexible viologen ligand exhibiting aniline detection in the solid state

In this work, a novel multichromic cationic coordination polymer, named [Zn4(BTC)3(bcbpy)2]·5H2O (1), based on a new flexible viologen ligand 1,1'-bis(3-cyanobenzyl)-[4,4'-bipyridine]-1,1'-diium (H2bcbpy·2Cl), Zn(NO3)2·6H2O and pyromellitic acid (H4BTC) was synthesized. Compound 1 has good photosensitive activity and can respond to sunlight at room temperature. The colour of compound 1 changes rapidly in response to UV light and blue ray irradiation within 5 s. We rarely obtained the crystal structures after irradiation under UV light and blue ray. At the same time, compound 1 shows the hydrochromism phenomenon when heated at 120 °C, and it also shows the ability of detecting aniline and NO2- under low-concentration conditions (10-4 M).

Porous and Nonporous Coordination Polymers Induced by Pseudohalide Ions for Luminescence and Gas Sorption

The three-dimensional (3D) coordination polymers [Cd(tpmd)(NCX)₂]_n [X = O (1), S (2), and BH₃ (3); tpmd = N,N,N',N'-tetrakis(pyridin-4-yl)methanediamine] have been determined to display their network structures through coordinated anionic ligands. Polymers 1 and 2 show nonporous structures, whereas polymer 3 shows a porous coordination framework. On the basis of the Cd(II) network structures, the 3D coordination polymer [Zn(tpmd)(NCBH₃)₂]_n·nMeOH (4) was self-assembled. In the cases of polymers 1 and 2, pseudohalide ions acted to form nonporous network structures; however, in polymers 3 and 4, NCBH₃^- helps to construct porous network structures. Polymers 1-4 show strong ultraviolet luminescence emissions, depending on the pseudohalide ions present, compared to the tpmd ligands. Interestingly, coordination polymers 3 and 4 that possess NCBH₃^- ions exhibit high porosities and gas sorption properties. The polymers appeared to absorb N₂, H₂, CO₂, and CH₄. In the case of polymer 4, the structure is almost identical with that of polymer 3, except for the Cd(II) ion. However, polymer 4 has a larger void volume and higher gas absorption ability for N₂ gas than polymer 3. For the sorption of gases, polymers 3 and 4 showed similar behaviors.

Coordination Polymers Based on Highly Emissive Ligands: Synthesis and Functional Properties

Coordination polymers are constructed from metal ions and bridging ligands, linking them into solid-state structures extending in one (1D), two (2D) or three dimensions (3D). Two- and three-dimensional coordination polymers with potential voids are often referred to as metal-organic frameworks (MOFs) or porous coordination polymers. Luminescence is an important property of coordination polymers, often playing a key role in their applications. Photophysical properties of the coordination polymers can be associated with intraligand, metal-centered, guest-centered, metal-to-ligand and ligand-to-metal electron transitions. In recent years, a rapid growth of publications devoted to luminescent or fluorescent coordination polymers can be observed. In this review the use of fluorescent ligands, namely, 4,4'-stilbenedicarboxylic acid, 1,3,4-oxadiazole, thiazole, 2,1,3-benzothiadiazole, terpyridine and carbazole derivatives, naphthalene diimides, 4,4',4''-nitrilotribenzoic acid, ruthenium(II) and iridium(III) complexes, boron-dipyrromethene (BODIPY) derivatives, porphyrins, for the construction of coordination polymers are surveyed. Applications of such coordination polymers based on their photophysical properties will be discussed. The review covers the literature published before April 2020.

Flexible Luminescent MOF: Trapping of Less Stable Conformation of Rotational Isomers, In Situ Guest-Responsive Turn-Off and Turn-On Luminescence and Mechanistic Study

Flexible and dynamic Cu^I metal-organic framework [Cu(I)-MOF (1)] with well-defined nanoporous channel built with flexible terpyridine ligand offers a scaffold for the inclusion of different classes of guest molecules through a single-crystal-to-single-crystal (SCSC) transformation in the vapor phase at ambient conditions with visual color change. Thus, Cu(I)-MOF (1) offers a potential platform for molecular recognition and undergoes guest-responsive structural dynamism that can be triggered by interfacial interactions. Despite having the stable conformation of the rotational isomers, it selectively encapsulates the less stable conformation (eclipsed and gauche) into its cavity from their vapor phases in the SCSC process. All of the guest-exchanged processes are reversible. It shows selectivity toward less polar guest in a class. The intermediate of all of the guest-exchanged processes appeared as a black material (H₂O@Cu(I)-MOF) (1z) prior to the encapsulation of each guest that happens through the SCSC manner followed by encapsulation of the guests replacing H₂O in situ at ambient conditions through SCSC transformation. This confirms that the process is a two-step process leading to a common intermediate. The MOF loses its luminescence behavior with H₂O removing lattice solvents in situ and appears as a black material, and it regains its luminescence property with the guests replacing H₂O. Thus, the MOF displays both luminescence "turn-off" and "turn-on" before and after incorporation of the guests, respectively, leading to a common turn-off mechanism. A fluorescence titration experiment shows selectivity toward aniline among benzene and its derivatives.

Highly efficient and acid-resistant metal-organic frameworks of MIL-101(Cr)-NH2 for Pd(II) and Pt(IV) recovery from acidic solutions: Adsorption experiments, spectroscopic analyses, and theoretical computations

Cr-based metal-organic frameworks (MOFs) of MIL-101(Cr)-NH₂ was post-synthesized from nitro-functionalized MIL-101(Cr) (MIL-101(Cr)-NO₂) through a reduction process. Adsorption behaviors and interactions of MIL-101(Cr)-NH₂ and MIL-101(Cr)-NO₂ with platinum group metal (PGM) anions of Pd(II) (PdCl₄^2-) and Pt(IV) (PtCl₆^2-), were investigated through batch adsorption experiments, spectroscopic analyses, and theoretical computations. According to adsorption kinetics and isotherms, the uptakes of Pd(II) and Pt(IV) by in MIL-101(Cr)-NH₂ were found to be much higher than their uptakes by MIL-101(Cr)-NO₂. The abundant protonated amine groups (BDC-NH₃⁺) in MIL-101(Cr)-NH₂ were verified to be the main adsorptive binding sites by XPS and FTIR spectroscopy, and FE-SEM imageries. Additionally, BDC-NH₃⁺ shows extremely high affinities (b value) and binding energies (E_bind) for PdCl₄^2- and PtCl₆^2- through electrostatic attraction, resulting in much higher adsorption capacities of MIL-101(Cr)-NH₂ for these PGMs as compared to those of MIL-101(Cr)-NO₂. Moreover, the MOFs' Cr nodes without terminal -OH indicated positive electrostatic potentials, and certain values of E_bind for PGM anions. Thus, the few-amount cationic Cr sites could also make little contributions to the adsorption of PGM anions in MIL-101(Cr)-NH₂ or MIL-101(Cr)-NO₂. Furthermore, the perfect regeneration and reusability of MIL-101(Cr)-NH₂ over five of adsorption-desorption cycles, suggesting its potential in practical applications.