Maximizing the Synergistic Effect of CoNi Catalyst on α-MoC for Robust Hydrogen Production

Low-voltage single-atom electron microscopy with carbon-based nanomaterials

The properties of materials are strongly correlated with their atomic scale structures. Achieving a comprehensive understanding of the atomic-scale structure-property relationship requires advancements of imaging and spectroscopy techniques. Aberration-corrected scanning transmission electron microscopy (STEM) has seen rapid development over the past decades and is now routinely employed for atomic-scale characterization. However, quantitative STEM imaging and spectroscopy analysis at the single-atom level is challenging due to the extremely weak signals generated from individual atom, thus imposing stringent requirements for analysis sensitivity. This review discusses the development and application of low-voltage STEM techniques with single-atom sensitivity, primarily based on recent research presented on an invited talk at the 5th 2D23 SALVE Symposium, including annular dark-field (ADF) imaging, functional imaging and electron energy-loss spectroscopy (EELS) analysis. Carbon-based nanomaterials were chosen as model systems for demonstrating the capabilities of single-atom STEM imaging and EELS analysis, due to their structural stability under low accelerating voltages and their rich physical and chemical properties. Moreover, this review summarizes recent advancements and applications of low-voltage single-atom STEM imaging and spectroscopy in the study of functional materials and discusses prospects for future developments.

Fundamental Insights into the Direct Electron Transfer Mechanism on Ag Atomic Cluster

The nonradical oxidation pathway for pollutant degradation in Fenton-like catalysis is favorable for water treatment due to the high reaction rate and superior environmental robustness. However, precise regulation of such reactions is still restricted by our poor knowledge of underlying mechanisms, especially the correlation between metal site conformation of metal atom clusters and pollutant degradation behaviors. Herein, we investigated the electron transfer and pollutant oxidation mechanisms of atomic-level exposed Ag atom clusters (AgAC) loaded on specifically crafted nitrogen-doped porous carbon (NPC). The AgAC triggered a direct electron transfer (DET) between the terminal oxygen (Oα) of surface-activated peroxodisulfate and the electron-donating substituents-containing contaminants (EDTO-DET), rendering it 11-38 times higher degradation rate than the reported carbon-supported metal catalysts system with various single-atom active centers. Heterocyclic substituents and electron-donating groups were more conducive to degradation via the EDTO-DET system, while contaminants with high electron-absorbing capacity preferred the radical pathway. Notably, the system achieved 79.5% chemical oxygen demand (COD) removal for the treatment of actual pharmaceutical wastewater containing 1053 mg/L COD within 30 min. Our study provides valuable new insights into the Fenton-like reactions of metal atom cluster catalysts and lays an important basis for revolutionizing advanced oxidation water purification technologies.

In Situ Engineering Multifunctional Active Sites of Ruthenium-Nickel Alloys for pH-Universal Ampere-Level Current-Density Hydrogen Evolution

Developing robust non-platinum electrocatalysts with multifunctional active sites for pH-universal hydrogen evolution reaction (HER) is crucial for scalable hydrogen production through electrochemical water splitting. Here ultra-small ruthenium-nickel alloy nanoparticles steadily anchored on reduced graphene oxide papers (Ru-Ni/rGOPs) as versatile electrocatalytic materials for acidic and alkaline HER are reported. These Ru-Ni alloy nanoparticles serve as pH self-adaptive electroactive species by making use of in situ surface reconstruction, where surface Ni atoms are hydroxylated to produce bifunctional active sites of Ru-Ni(OH)2 for alkaline HER, and selectively etched to form monometallic Ru active sites for acidic HER, respectively. Owing to the presence of Ru-Ni(OH)2 multi-site surface, which not only accelerates water dissociation to generate reactive hydrogen intermediates but also facilitates their recombination into hydrogen molecules, the self-supported Ru90Ni10/rGOP hybrid electrode only takes overpotential of as low as ≈106 mV to deliver current density of 1000 mA cm-2, and maintains exceptional stability for over 1000 h in 1 m KOH. While in 0.5 m H2SO4, the Ru90Ni10/rGOP hybrid electrode exhibits acidic HER catalytic behavior comparable to commercially available Pt/C catalyst due to the formation of monometallic Ru shell. These electrochemical behaviors outperform some of the best Ru-based catalysts and make it attractive alternative to Pt-based catalysts toward highly efficient HER.

Rapid synthesis of high-purity molybdenum carbide with controlled crystal phases

The synthesis of phase-pure carbide nanomaterials is crucial for understanding their structure-performance relationships, and for advancing their application in catalysis. Molybdenum carbides, in particular, have garnered increasing interest due to their Pt-like surface electronic properties and high catalytic activity. Traditional methods for synthesizing molybdenum carbide are often lengthy and energy-intensive, leading to an uncontrolled phase, low purity, and excessive carbon coverage, which hinder their catalytic performance improvement. This work introduces a novel pulsed Joule heating (PJH) technique that overcomes these limitations, enabling the controlled synthesis of high-purity molybdenum carbides (β-Mo2C, η-MoC1-x, and α-MoC1-x) within seconds by using MoOx/4-Cl-o-phenylenediamine as the hybrid precursor. The PJH method allows precise control over the diffusion of carbon species in the Mo-C system, resulting in a significantly improved phase purity of up to 96.89 wt%. Moreover, the electronic structure of platinum catalysts on molybdenum carbide was modulated through electron metal-support interaction (EMSI) between Pt and MoxC, and contributed to enhanced catalytic performance compared to carbon-supported Pt catalysts during the hydrogen evolution reaction. Overall, this work paves the way for efficient production of high-quality molybdenum carbide nanomaterials, and thus is expected to accelerate their industrial deployments in practical catalytic reactions.

Electrocatalytic Nitrate Reduction on Metallic CoNi-Terminated Catalyst with Industrial-Level Current Density in Neutral Medium

Green ammonia synthesis through electrocatalytic nitrate reduction reaction (eNO3RR) can serve as an effective alternative to the traditional energy-intensive Haber-Bosch process. However, achieving high Faradaic efficiency (FE) at industrially relevant current density in neutral medium poses significant challenges in eNO3RR. Herein, with the guidance of theoretical calculation, a metallic CoNi-terminated catalyst is successfully designed and constructed on copper foam, which achieves an ammonia FE of up to 100% under industrial-level current density and very low overpotential (-0.15 V versus reversible hydrogen electrode) in a neutral medium. Multiple characterization results have confirmed that the maintained metal atom-terminated surface through interaction with copper atoms plays a crucial role in reducing overpotential and achieving high current density. By constructing a homemade gas stripping and absorption device, the complete conversion process for high-purity ammonium nitrate products is demonstrated, displaying the potential for practical application. This work suggests a sustainable and promising process toward directly converting nitrate-containing pollutant solutions into practical nitrogen fertilizers.

Silica Confinement for Stable and Magnetic Co-Cu Alloy Nanoparticles in Nitrogen-Doped Carbon for Enhanced Hydrogen Evolution

Ammonia borane (AB) with 19.6 wt % H2 content is widely considered a safe and efficient medium for H2 storage and release. Co-based nanocatalysts present strong contenders for replacing precious metal-based catalysts in AB hydrolysis due to their high activity and cost-effectiveness. However, precisely adjusting the active centers and surface properties of Co-based nanomaterials to enhance their activity, as well as suppressing the migration and loss of metal atoms to improve their stability, presents many challenges. In this study, mesoporous-silica-confined bimetallic Co-Cu nanoparticles embedded in nitrogen-doped carbon (CoxCu1-x@NC@mSiO2) were synthesized using a facile mSiO2-confined thermal pyrolysis strategy. The obtained product, an optimized Co0.8Cu0.2@NC@mSiO2 catalyst, exhibits enhanced performance with a turnover frequency of 240.9 molH2 ⋅ molmetal ⋅ min-1 for AB hydrolysis at 298 K, surpassing most noble-metal-free catalysts. Moreover, Co0.8Cu0.2@NC@mSiO2 demonstrates magnetic recyclability and extraordinary stability, with a negligible decline of only 0.8 % over 30 cycles of use. This enhanced performance was attributed to the synergistic effect between Co and Cu, as well as silica confinement. This work proposes a promising method for constructing noble-metal-free catalysts for AB hydrolysis.

Insights into the hydrogen generation and catalytic mechanism on Co-based nanocomposites derived from pyrolysis of organic metal precursor

Hydrogen generation from boron hydride is important for the development of hydrogen economy. Cobalt (Co) element has been widely used in the hydrolysis of boron hydride. Pyrolysis is a common method for materials synthesis in catalytic fields. Herein, Co-based nanocomposites derived from the pyrolysis of organic metal precursors and used for hydrolysis of boron hydride are summarized and discussed. The different precursors consisting of MOF, supported, metal, and metal phosphide precursors are summarized. The catalytic mechanism consisting of dissociation mechanism based on oxidative addition-reduction elimination, pre-activation mechanism, SN2 mechanism, four-membered ring mechanism, and acid-base mechanism is intensively discussed. Finally, conclusions and outlooks are conveyed from the design of high-efficiency catalysts, the characterization of catalyst structure, the enhancement of catalytic activities, the investigation of the catalytic mechanism, and the catalytic stability of active structure. This review can provide guidance for designing high-efficiency catalysts and boosting development of hydrogen economy.

Engineering a hollow bowl-like porous carbon-confined Ru-MgO hetero-structured nanopair as a high-performance catalyst for ammonia borane hydrolysis

Exploration of high-performance catalysts holds great importance for on-demand H2 production from ammonia borane (AB) hydrolysis. In this work, a hollow bowl-like porous carbon-anchored Ru-MgO hetero-structured nano-pair with high-intensity interfaces is made, using a tailored design approach. Consequently, the optimized catalyst shows AB hydrolysis activity with a turnover frequency value of 784 min-1 in aqueous media and 1971 min-1 in alkaline solvent. Robust durability is also achieved, with slight deactivation after a ten-cycle test. Combined experimental and theoretical calculations validate the positive function of the interface between Ru and MgO for facilitating H transfer and boosting water activation, thus leading to improved AB hydrolysis performance. This study could be valuable in guiding the upgradation of Ru catalytic systems, to advance their practical applications.

Transition Metal Carbides as Supports for Catalytic Metal Particles: Recent Progress and Opportunities

Transition metal carbides (TMCs) constitute excellent alternatives to traditional oxide-based supports for small metal particles, leading to strong metal-support interactions, which drastically modify the catalytic properties of the supported metal atoms. Moreover, they possess extremely high melting points and good resistance to carbon deposition and sulfur poisoning, and the catalytic activities of some TMCs per se have been shown to be similar to those of Pt-group metals for a considerable number of reactions. Therefore, the use of TMCs as supports can give rise to bifunctional catalysts with multiple active sites. However, at present, only TiC and MoxC have been tested experimentally as supports for metal particles, and it is largely unclear which combinations may best catalyze which chemical reactions. In this Perspective, we review the most significant works on the use of TMCs as supports for catalytic applications, assess the current status of the field, and identify key advances being made and challenges, with an eye to the future.

CoP/Co heterojunction on porous g-C3N4 nanosheets as a highly efficient catalyst for hydrogen generation

Designing non-precious catalysts to synergistically achieve a facilitated exposure of abundant active sites is highly desired but remains a significant challenge. Herein, a hetero-structured catalyst CoP-Co supported on porous g-C3N4 nanosheets (CoP-Co/CN-I) was prepared by pyrolysis and P-inducing strategy. The optimal catalyst achieves a turnover frequency (TOF) of 26 min-1 at room temperature and the apparent activation energy (Ea) is 35.5 kJ·mol-1. The catalytic activity is ranked top among the non-precious metal phosphides or the other supports. Meanwhile, the catalytic activity has no significant decrease even after 5 cycles. The CoP/Co interfaces provide richly exposed active sites, optimize hydrogen/water absorption free energy via electronic coupling, and thus improve the catalytic activity. The experimental results reveal that the CoP/Co heterojunction improves the catalytic activity due to the construction of dual-active sites. This research facilitates the innovative construction of non-noble metal catalysts to meet industrial demand for heterogeneous catalysis.

Spatial engineering of single-atom Fe adjacent to Cu-assisted nanozymes for biomimetic O2 activation

The precise design of single-atom nanozymes (SAzymes) and understanding of their biocatalytic mechanisms hold great promise for developing ideal bio-enzyme substitutes. While considerable efforts have been directed towards mimicking partial bio-inspired structures, the integration of heterogeneous SAzymes configurations and homogeneous enzyme-like mechanism remains an enormous challenge. Here, we show a spatial engineering strategy to fabricate dual-sites SAzymes with atomic Fe active center and adjacent Cu sites. Compared to planar Fe-Cu dual-atomic sites, vertically stacked Fe-Cu geometry in FePc@2D-Cu-N-C possesses highly optimized scaffolds, favorable substrate affinity, and fast electron transfer. These characteristics of FePc@2D-Cu-N-C SAzyme induces biomimetic O2 activation through homogenous enzymatic pathway, resembling functional and mechanistic similarity to natural cytochrome c oxidase. Furthermore, it presents an appealing alternative of cytochrome P450 3A4 for drug metabolism and drug-drug interaction. These findings are expected to deepen the fundamental understanding of atomic-level design in next-generation bio-inspired nanozymes.

Renaissance of Strong Metal-Support Interactions

Strong metal-support interactions (SMSIs) have emerged as a significant and cutting-edge area of research in heterogeneous catalysis. They play crucial roles in modifying the chemisorption properties, interfacial structure, and electronic characteristics of supported metals, thereby exerting a profound influence on the catalytic properties. This Perspective aims to provide a comprehensive summary of the latest advancements and insights into SMSIs, with a focus on state-of-the-art in situ/operando characterization techniques. This overview also identifies innovative designs and applications of new types of SMSI systems in catalytic chemistry and highlights their pivotal role in enhancing catalytic performance, selectivity, and stability in specific cases. Particularly notable is the discovery of SMSI between active metals and metal carbides, which opens up a new era in the field of SMSI. Additionally, the strong interactions between atomically dispersed metals and supports are discussed, with an emphasis on the electronic effects of the support. The chemical nature of SMSI and its underlying catalytic mechanisms are also elaborated upon. It is evident that SMSI modification has become a powerful tool for enhancing catalytic performance in various catalytic applications.

Tailoring Secondary Coordination Sphere Effects in Single-metal-site Catalysts by Surface Immobilization of Supramolecular Cages

Controlling the coordination sphere of heterogeneous single-metal-site catalysts is a powerful strategy for fine-tuning their catalytic properties but is fairly difficult to achieve. To address this problem, we immobilized supramolecular cages where the primary- and secondary coordination sphere are controlled by ligand design. The kinetics of these catalysts were studied in a model reaction, the hydrolysis of ammonia borane, over a temperature range using fast and precise online measurements generating high-precision Arrhenius plots. The results show how catalytic properties can be enhanced by placing a well-defined reaction pocket around the active site. Our fine-tuning yielded a catalyst with such performance that the reaction kinetics are diffusion-controlled rather than chemically controlled.

Positioning hydrogen reaction sites by constructing CdS/CoNiMoS4 heterojunctions for efficient photocatalytic hydrogen evolution

The high gravimetric energy density of hydrogen makes it an ideal chemical fuel to address the issues of fossil fuel depletion and environmental pollution. Even though transition metal sulfides (TMSs) have been extensively investigated as substitutes for noble metals, their effectiveness is still doubtful for practical applications. Herein, we introduce a facile and general strategy to fabricate heterojunctions with CdS nanorods and a multimetallic transition metal sulfide (CoNiMoS4) for enhanced photocatalytic activity. The CdS/CoNiMoS4 heterojunction will serve as a dual-function photocatalyst with enhanced visible light absorption capability offered by CdS and high charge transfer efficiency provided by CoNiMoS4 nanostructures. Moreover, CdS/CoNiMoS4 nanostructures exhibit the best photocatalytic performance to generate H2 with an amount of 31.9 mmol g-1 h-1, with a distinguished stability for over 25 h. This synthetic approach may offer a new strategy to create diverse heterojunctions with Earth-abundant multimetallic components, which may broaden their scope of application in catalysis.

Dual Pd-Acid Sites Confined in a Hierarchical Core-Shell Structure for Hydrogenation of Nitrobenzene

A core-shell structured Pd@TS-1@meso-SiO2 catalyst with confined Pd nanometals has been fabricated by one-pot synthesis, impregnation method and sol-gel method. With the promotion of acid sites and protection of mesoporous silica shell, Pd@TS-1@meso-SiO2 shows higher activity than commercial comparison and higher stability than sample without mesoporous silica shell in the hydrogenation of nitrobenzene. The schematic illustration of the synergy effect is also proposed.

Boosting reactivity of water-gas shift reaction by synergistic function over CeO2-x/CoO1-x/Co dual interfacial structures

Dual-interfacial structure within catalysts is capable of mitigating the detrimentally completive adsorption during the catalysis process, but its construction strategy and mechanism understanding remain vastly lacking. Here, a highly active dual-interfaces of CeO2-x/CoO1-x/Co is constructed using the pronounced interfacial interaction from surrounding small CeO2-x islets, which shows high activity in catalyzing the water-gas shift reaction. Kinetic evidence and in-situ characterization results revealed that CeO2-x modulates the oxidized state of Co species and consequently generates the dual active CeO2-x/CoO1-x/Co interface during the WGS reaction. A synergistic redox mechanism comprised of independent contribution from dual functional interfaces, including CeO2-x/CoO1-x and CoO1-x/Co, is authenticated by experimental and theoretical results, where the CeO2-x/CoO1-x interface alleviates the CO poison effect, and the CoO1-x/Co interface promotes the H2 formation. The results may provide guidance for fabricating dual-interfacial structures within catalysts and shed light on the mechanism over multi-component catalyst systems.

Highly electron-deficient ultrathin Co nanosheets supported on mesoporous Cr2O3 for catalytic hydrogen evolution from ammonia borane

The hydrolysis of ammonia borane (NH3BH3) on metal-based heterogeneous catalysts under light irradiation has been considered as an efficient technique for hydrogen (H2) generation, in which the activity of the catalyst can be improved by increasing the electron density of the active metal. However, studies focused on reducing the electron density of the active metal are rare. Here, we report an electron density manipulation strategy to prepare highly electron-deficient ultrathin Co nanosheets via transferring nanosheets to support mesoporous Cr2O3 by simple one-step in situ reduction (denoted as Co/Cr2O3). X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge structure (XANES) spectra confirm the formation of electron-deficient Co nanosheets and the Co-O-Cr bond due to electron transfer from the nanosheets to mesoporous Cr2O3. Importantly, the Co-O-Cr bond can work as a bridge to accelerate the electron transfer under light irradiation and then improve the electron-deficiency degree of Co nanosheets. As a result, the optimal Co/Cr2O3 exhibits a high intrinsic catalytic performance with the turnover frequency (TOF) value of 106.8 min-1 and significantly reduces the activation energy (Ea) to 16.8 kJ mol-1 under visible light irradiation, which make it among the best ever recorded monometallic Co-based catalyst with enriched electrons. The density functional theory (DFT) calculation results suggest that the electron-deficient Co nanosheets are responsible for the greatly decreased H2O activation and dissociation energy barriers and then the acceleration of the evolution of H2. The work provides a new perspective for designing high efficiency catalysts for H2 production, which is beneficial for relative energy conversion and storage catalysis.

Controlled synthesis of Mo2C micron flowers via vapor-liquid-solid method as enhanced electrocatalyst for hydrogen evolution reaction

Mo2C demonstrates excellent performance in catalysis, and it has been found to possess excellent hydrogen evolution reaction (HER) catalytic activity and highly efficient nitrogen fixation. The catalytic activity of Mo2C is greatly influenced and restricted by the preparation method. Sintering and carbon deposition, which affect the catalytic activity of Mo2C, are inevitable in the traditional vapor-solid-solid (VSS) process. In this study, we report the controllable synthesis of α-Mo2C micron flowers by adjusting the growth temperature via a vapor-liquid-solid (VLS) process. The density of the Mo2C micron flowers is closely related to the concentration of Na2MoO4 aqueous solution. The as-grown Mo2C micron flowers dispersed with Pt are validated to be an enhanced collaborative electrocatalyst for HER against Pt/VSS-Mo2C.

Atomic Aerogel Materials (or Single-Atom Aerogels): An Interesting New Paradigm in Materials Science and Catalysis Science

The concept of "single-atom catalysis" is first proposed by Tao Zhang, Jun Li, and Jingyue Liu in 2011. Single-atom catalysts (SACs) have a very high catalytic activity and greatly improved atom utilization ratio. At present, SACs have become frontier materials in the field of catalysis. Aerogels are highly porous materials with extremely low density and extremely high porosity. These pores play a key role in determining their surface reactivity and mechanical stability. The alliance of SACs and aerogels can fully reflect their structural advantages and lead to new enhancement effects. Herein, a general concept of "atomic aerogel materials" (AAMs) (or single-atom aerogels (SAAs)) is proposed to describe this interesting new paradigm in both material and catalysis fields. Based on the basic units of "gel," the AAMs can be divided into two categories: carrier-level AAMs (with micro-, nano-, or sub-nanometer pore structures) and atomic-level AAMs (with atomic-defective or oxygen-bridged sub-nanopore structures). The basic unit of the former (i.e., single-atom-functionalized aerogels) is the carrier materials in nanostructures, and the latter (i.e., single-atom-built aerogels) is the single metal atoms in atomic structures. The atomic-defective or oxygen-bridged AAMs will be important development directions in versatile heterogeneous catalytic or noncatalytic fields. The design proposals, latent challenges, and coping strategies of this new "atomic nanosystem" in applications are pointed out as well.

Recent Advances and Perspectives on Supported Catalysts for Heterogeneous Hydrogen Production from Ammonia Borane

Ammonia borane (AB), a liquid hydrogen storage material, has attracted increasing attention for hydrogen utilization because of its high hydrogen content. However, the slow kinetics of AB hydrolysis and the indefinite catalytic mechanism remain significant problems for its large-scale practical application. Thus, the development of efficient AB hydrolysis catalysts and the determination of their catalytic mechanisms are significant and urgent. A summary of the preparation process and structural characteristics of various supported catalysts is presented in this paper, including graphite, metal-organic frameworks (MOFs), metal oxides, carbon nitride (CN), molybdenum carbide (MoC), carbon nanotubes (CNTs), boron nitride (h-BN), zeolites, carbon dots (CDs), and metal carbide and nitride (MXene). In addition, the relationship between the electronic structure and catalytic performance is discussed to ascertain the actual active sites in the catalytic process. The mechanism of AB hydrolysis catalysis is systematically discussed, and possible catalytic paths are summarized to provide theoretical considerations for the designing of efficient AB hydrolysis catalysts. Furthermore, three methods for stimulating AB from dehydrogenation by-products and the design of possible hydrogen product-regeneration systems are summarized. Finally, the remaining challenges and future research directions for the effective development of AB catalysts are discussed.

Synergistic Catalysis at the Ni/ZrO2-x Interface toward Low-Temperature CO2 Methanation

The CO₂ methanation reaction, which achieves the carbon cycle and gains value-added chemicals, has attracted much attention, but the design and exploitation of highly active catalysts remain a big challenge. Herein, zirconium dioxide-supported Ni catalysts toward low-temperature CO₂ methanation are obtained via structural topological transformation of NiZrAl-layered double hydroxide (LDH) precursors, which have the feature of an interfacial structure (Ni-O-Zr³⁺-Vö) between Ni nanoparticles and ZrO_2-x support (0 < x < 1). The optimized catalyst (Ni/ZrO_2-x-S2) exhibits exceptional CO₂ conversion (∼72%) at a temperature as low as 230 °C with a ∼100% selectivity to CH₄, without obvious catalyst deactivation within a 110 h reaction at a high gas hourly space velocity of 30,000 mL·g^-1·h^-1. Markedly, the space-time yield of CH₄ reaches up to ∼0.17 molCH4·g_cat^-1·h^-1, which is superior to previously reported Ni catalysts evaluated under similar reaction conditions. Both in situ/operando investigations (diffuse reflectance infrared Fourier transform spectroscopy and X-ray absorption fine structure) and catalytic evaluations substantiate the interfacial synergistic catalysis at the Ni/ZrO_2-x interface: the Zr³⁺-Vö facilitates the activation adsorption of CO₂, while the H₂ molecule experiences dissociation at the metallic Ni sites. This work demonstrates that the metal-support interface effect plays a key role in improving the catalytic behavior toward CO₂ methanation, which can be extended to other high-performance heterogeneous catalysts toward structure-sensitive systems.

Synergistic interface between metal Cu nanoparticles and CoO for highly efficient hydrogen production from ammonia borane

The development of efficient non-noble metal catalysts for the dehydrogenation of hydrogen (H2) storage materials is highly desirable to enable the global production and storage of H2 energy. In this study, Cu x -(CoO)1-x /TiO2 catalysts with a Cu-CoO interface supported on TiO2 are shown to exhibit high catalytic efficiency for ammonia borane (NH3BH3) hydrolysis to generate H2. The best catalytic activity was observed for a catalyst with a Cu : Co molar ratio of 1 : 1. The highest dehydrogenation turnover frequency (TOF) of 104.0 molH2 molmetal -1 min-1 was observed in 0.2 M NaOH at room temperature, surpassing most of the TOFs reported for non-noble catalysts for NH3BH3 hydrolysis. Detailed characterisation of the catalysts revealed electronic interactions at the Cu-CoO heterostructured interface of the catalysts. This interface provides bifunctional synergetic sites for H2 generation, where activation and adsorption of NH3BH3 and H2O are accelerated on the surface of Cu and CoO, respectively. This study details an effective method of rationally designing non-noble metal catalysts for H2 generation via a metal and transition-metal oxide interface.

Promoting Molecular Exchange on Rare-Earth Oxycarbonate Surfaces to Catalyze the Water-Gas Shift Reaction

It is highly desirable to fabricate an accessible catalyst surface that can efficiently activate reactants and desorb products to promote the local surface reaction equilibrium in heterogeneous catalysis. Herein, rare-earth oxycarbonates (Ln₂O₂CO₃, where Ln = La and Sm), which have molecular-exchangeable (H₂O and CO₂) surface structures according to the ordered layered arrangement of Ln₂O₂²⁺ and CO₃^2- ions, are unearthed. On this basis, a series of Ln₂O₂CO₃-supported Cu catalysts are prepared through the deposition precipitation method, which provides excellent catalytic activity and stability for the water-gas shift (WGS) reaction. Density functional theory calculations combined with systematic experimental characterizations verify that H₂O spontaneously dissociates on the surface of Ln₂O₂CO₃ to form hydroxyl by eliminating the carbonate through the release of CO₂. This interchange efficiently promotes the WGS reaction equilibrium shift on the local surface and prevents the carbonate accumulation from hindering the active sites. The discovery of the unique layered structure provides a so-called "self-cleaning" active surface for the WGS reaction and opens new perspectives about the application of rare-earth oxycarbonate nanomaterials in C1 chemistry.

In Situ Investigations on Structural Evolutions during the Facile Synthesis of Cubic α-MoC1-x Catalysts

Cubic α-phase molybdenum carbides (α-MoC_1-x) exhibit great potential in hydrogen production at low temperatures due to their excellent activity in water dissociation. However, the design strategies of α-MoC_1-x are severely restricted by the harsh synthesis conditions, which involve multistep ammonification and carburization or the utilization of a significant amount of noble metals. Herein, high-purity α-MoC_1-x synthesis in a one-step carburization process was achieved with the assistance of a trace amount of Rh (0.02%). The structural evolution of Mo species during phase transition was monitored via qualitative and quantitative analysis by in situ X-ray diffraction (XRD) and in situ X-ray absorption spectroscopy (XAS), respectively. Environmental transmission electron microscopy (ETEM) was used to follow the visual changes. We reveal that the reduction of monoclinic MoO₃ to cubic oxygen-deficient Mo oxide (MoO_x) at low temperatures owing to the promoted H₂ activation on Rh sites is vital to the following carbon atom insertion and transformation to α-MoC_1-x, making the carburization follow the topological route. The systematic analysis of the relationship between the reduction behavior and the structural evolution supplies a feasible strategy for the α-MoC_1-x synthesis, and in situ characterizations shed light on controlling the phase transformation during carburization.

Polymer Hydrogel Supported Ni/Pd Alloys for Hydrogen Gas Production from Hydrolysis of Dimethylamine Borane with a Long Recyclable Lifetime

Hydrogen gas production can be produced from dimethylamine borane by the catalytic effect of metal nanoparticles. Past research efforts were heavily focused on dehydrogenation in organic solvents. In this study, hydrolysis of the borane in aqueous solutions was investigated, which bears two significant advantages: that two-thirds of the hydrogen generated originate from water and that the hydrogen storage materials are non-flammable. Polymer hydrogels serve as good carriers for metal particles as catalysts in aqueous solutions. Kinetic analysis of hydrogen production was performed for Ni/Pd bimetallic nanoclusters dispersed in a polymer hydrogel with a 3-D network structure. The reaction catalyzed by the bimetallic nanoclusters has an activation energy of only 34.95 kJ/mol, considerably lower than that by Ni or other metal catalysts reported. A significant synergistic effect was observed in the Ni/Pd bimetallic catalysts (Ni–Pd = 20/1) with a higher activity than Pd or Ni alone. This proves the alloy nature of the nanoparticles in the borane hydrolysis and the activation of water and borane by both metals to break the O–H and B–H bonds. The hydrogel with the Ni/Pd metal can be recycled with a much longer lifetime than all the previously prepared catalysts. The aqueous borane solutions with a polymer hydrogel can become a more sustainable hydrogen supplier for long-term use.

Recent Progress of Diatomic Catalysts: General Design Fundamentals and Diversified Catalytic Applications

In recent years, some experiments and theoretical work have pointed out that diatomic catalysts not only retain the advantages of monoatomic catalysts, but also introduce a variety of interactions, which exceed the theoretical limit of catalytic performance and can be applied to many catalytic fields. Here, the interaction between adjacent metal atoms in diatomic catalysts is elaborated: synergistic effect, spacing enhancement effect (geometric effect), and electronic effect. With regard to the classification and characterization of various new diatomic catalysts, diatomic catalysts are classified into four categories: heteronuclear/homonuclear, with/without carbon carriers, and their characterization measures are introduced and explained in detail. In the aspect of preparation of diatomic catalysts, the widely used atomic layer deposition method, metal-organic framework derivative method, and simple ball milling method are introduced, with emphasis on the formation mechanism of diatomic catalysts. Finally, the effective control strategies of four diatomic catalysts and the key applications of diatomic catalysts in electrocatalysis, photocatalysis, thermal catalysis, and other catalytic fields are given.

Ptn-Ov synergistic sites on MoOx/γ-Mo2N heterostructure for low-temperature reverse water-gas shift reaction

In heterogeneous catalysis, the interface between active metal and support plays a key role in catalyzing various reactions. Specially, the synergistic effect between active metals and oxygen vacancies on support can greatly promote catalytic efficiency. However, the construction of high-density metal-vacancy synergistic sites on catalyst surface is very challenging. In this work, isolated Pt atoms are first deposited onto a very thin-layer of MoO₃ surface stabilized on γ-Mo₂N. Subsequently, the Pt-MoO_x/γ-Mo₂N catalyst, containing abundant Pt cluster-oxygen vacancy (Pt_n-O_v) sites, is in situ constructed. This catalyst exhibits an unmatched activity and excellent stability in the reverse water-gas shift (RWGS) reaction at low temperature (300 °C). Systematic in situ characterizations illustrate that the MoO₃ structure on the γ-Mo₂N surface can be easily reduced into MoO_x (2 < x < 3), followed by the creation of sufficient oxygen vacancies. The Pt atoms are bonded with oxygen atoms of MoO_x, and stable Pt clusters are formed. These high-density Pt_n-O_v active sites greatly promote the catalytic activity. This strategy of constructing metal-vacancy synergistic sites provides valuable insights for developing efficient supported catalysts.

Materials Research Directions Toward a Green Hydrogen Economy: A Review

A constellation of technologies has been researched with an eye toward enabling a hydrogen economy. Within the research fields of hydrogen production, storage, and utilization in fuel cells, various classes of materials have been developed that target higher efficiencies and utility. This Review examines recent progress in these research fields from the years 2011-2021, exploring the most commonly occurring concepts and the materials directions important to each field. Particular attention has been given to catalyst materials that enable the green production of hydrogen from water, chemical and physical storage systems, and materials used in technical capacities within fuel cells. The quantification of publication and materials trends provides a picture of the current state of development within each node of the hydrogen economy.

Tailoring Oxygen Reduction Reaction Pathway on Spinel Oxides via Surficial Geometrical-Site Occupation Modification Driven by the Oxygen Evolution Reaction

The oxygen reduction reaction (ORR) has been demonstrated as a critical technology for both energy conversion technologies and hydrogen peroxide intermediate production. Herein, an in situ oxygen evolution reaction (OER) surface evolution strategy is applied for changing the surface structure of MnCo₂ O₄ oxide with tetrahedral and octahedral cations vacancies to realize reaction pathway switching from 2e^- ORR and 4e^- ORR. Interestingly, the as-synthesized MnCo₂ O₄ -pristine (MnCo₂ O₄ -P) with the highest surficial Mn/Co octahedron occupation favors two electrons reaction routes exhibiting high H₂ O₂ selectivity (≈80% and reaches nearly 100% at 0.75 V vs RHE); after surface atoms reconstruction, MnCo₂ O₄ -activation (MnCo₂ O₄ -A) with the largest Mn/Co tetrahedron occupation present excellent ORR performance through the four-electron pathway with an ultrahigh onset potential and half-wave potential of 0.78 and 0.92 V, ideal mass activity (MA), and turnover frequencies (TOF) values. Density functional theory (DFT) calculations reveal the concurrent modulations of both Co and Mn by the surface reconstructions, which improve the electroactivity of MnCo₂ O₄ -A toward the 4e^- pathway. This work provides a new perspective to building correlation of OER activation-ORR property, bringing detailed understating for reaction route transformation, and thus guiding the development of certain electrocatalysts with specific purposes.

Ultrafast self-heating synthesis of robust heterogeneous nanocarbides for high current density hydrogen evolution reaction

Designing cost-effective and high-efficiency catalysts to electrolyze water is an effective way of producing hydrogen. Practical applications require highly active and stable hydrogen evolution reaction catalysts working at high current densities (≥1000 mA cm-2). However, it is challenging to simultaneously enhance the catalytic activity and interface stability of these catalysts. Herein, we report a rapid, energy-saving, and self-heating method to synthesize high-efficiency Mo2C/MoC/carbon nanotube hydrogen evolution reaction catalysts by ultrafast heating and cooling. The experiments and density functional theory calculations reveal that numerous Mo2C/MoC hetero-interfaces offer abundant active sites with a moderate hydrogen adsorption free energy ΔGH* (0.02 eV), and strong chemical bonding between the Mo2C/MoC catalysts and carbon nanotube heater/electrode significantly enhances the mechanical stability owing to instantaneous high temperature. As a result, the Mo2C/MoC/carbon nanotube catalyst achieves low overpotentials of 233 and 255 mV at 1000 and 1500 mA cm-2 in 1 M KOH, respectively, and the overpotential shows only a slight change after working at 1000 mA cm-2 for 14 days, suggesting the excellent activity and stability of the high-current-density hydrogen evolution reaction catalyst. The promising activity, excellent stability, and high productivity of our catalyst can fulfil the demands of hydrogen production in various applications.

Atomic Interface-Exciting Catalysis on Cobalt Nitride-Oxide for Accelerating Hydrogen Generation

The rational design of the interface structure between nitride and oxide using the same metallic element and correlating the interfacial active center with a determined catalytic mechanism remain challenging. Herein, a Co₄ N-Co₃ O₄ interface structure is designed to determine the effect of interfacial active centers on hydrogen generation from ammonia borane. An unparalleled catalytic activity toward H₂ production with a turnover frequency up to 79 min^-1 is achieved on Co₄ N-Co₃ O₄ @C catalyst for ten recycles. Experimental analyses and theoretical simulation suggest that the atomic interface-exciting effect (AieE) is responsible for the high catalytic activity. The Co₄ N-Co₃ O₄ interface facilitates the targeted adsorption and activation of NH₃ BH₃ and H₂ O molecules to generate H^* and H₂ . The two active centers of Co_(N)^* and Co_(O)^* at the Co₄ N-Co₃ O₄ interface activate NH₃ BH₃ and H₂ O, respectively. This proof-of-concept research on AieE provides important insights regarding the design of heterogeneous catalysts and promotes the development of the nature and regulation of energy chemical conversion.

Synergistic effects on d-band center via coordination sites of M-N3P1 (M = Co and Ni) in dual single atoms that enhances photocatalytic dechlorination from tetrachlorobispheonl A

Transition metal single atoms (TM-SAs) coordinated with highly electronegative N atoms often suffer from low activity and poor stability, which limiting their application in catalysis. To solve it, a PH₃-assisted annealing strategy is designed to synthesize atomically dispersed TM-SAs (CCoNiP), which is stemmed from a pyrolysis approach of pre-designed CoNi layered double hydroxide (LHD) as a soft-template, and further coordinated with P atoms for adjusting the coordination environment. Characterization results show that the atomically dispersed Co and Ni atoms anchor on the carbon nitride substrate with Co/Ni-N₃P₁ coordination sites. Combined with density functional theory calculations, it is confirmed that multiple coordination sites of Co/Ni-N and Co/Ni-P can modulate d-band center position which increases the catalytic activity of TM-SAs. The formed multiple midgap levels can extend optical absorption ranges. Meanwhile, P-introduction can change the coordination environment, suppress the conversion trend of SAs to high valence state and improve electron separation. All the above characteristics can improve effective degradation from Tetrachlorobisphenol A (TCBPA) under visible light irradiation, achieving 100% removal and 44.1% dechlorination rate.

Bi2O3/BiO2 Nanoheterojunction for Highly Efficient Electrocatalytic CO2 Reduction to Formate

Heterostructure engineering plays a vital role in regulating the material interface, thus boosting the electron transportation pathway in advanced catalysis. Herein, a novel Bi₂O₃/BiO₂ heterojunction catalyst was synthesized via a molten alkali-assisted dealumination strategy and exhibited rich structural dynamics for an electrocatalytic CO₂ reduction reaction (ECO₂RR). By coupling in situ X-ray diffraction and Raman spectroscopy measurements, we found that the as-synthesized Bi₂O₃/BiO₂ heterostructure can be transformed into a novel Bi/BiO₂ Mott-Schottky heterostructure, leading to enhanced adsorption performance for CO₂ and *OCHO intermediates. Consequently, high selectivity toward formate larger than 95% was rendered in a wide potential window along with an optimum partial current density of -111.42 mA cm^-2 that benchmarked with the state-of-the-art Bi-based ECO₂RR catalysts. This work reports the construction and fruitful structural dynamic insights of a novel heterojunction electrocatalyst for ECO₂RR, which paves the way for the rational design of efficient heterojunction electrocatalysts for ECO₂RR and beyond.

Strongly Coupled Nitrogen-Doped Mo2C@CoNi Alloy Hybrid Architecture toward Efficient Hydrogen Evolution Reaction

Development of high-efficiency electrocatalysts for water splitting is a promising channel to produce clean hydrogen energy. Herein, we demonstrate that the combination of nitrogen-doped Mo₂C and CoNi alloy to form a hybrid architecture is an effective way to produce hydrogen from electrochemical water splitting. Benefiting from a combination of mechanisms, the optimized N-Mo₂C@CoNi-650 shows remarkable hydrogen evolution reaction (HER) activity with small overpotentials of 35, 123, and 220 mV to reach the current density of 10, 50, and 100 mA cm^-2 in alkaline media, respectively, outperforming most previously reported HER electrocatalysts. The efficient electrocatalytic performance is ascribed to the highly exposed active sites, fast reaction kinetics, and improved charge-transfer steaming from the synergistic effect between each component. This work presents a new insight into designing and preparing highly efficient electrocatalysts toward the HER.

Metal-Support Synergistic Catalysis in Pt/MoO3-x Nanorods toward Ammonia Borane Hydrolysis with Efficient Hydrogen Generation

Ammonia borane (NH₃BH₃, AB) serves as a promising material for chemical storage of hydrogen owing to its high hydrogen density and superior stability, in which the development of highly efficient heterogeneous catalysts toward AB hydrolysis plays a crucial role. Herein, we report Pt atomic clusters supported on MoO_3-x nanorods using a two-step process: MoO_3-x nanorods were synthesized at various calcination temperatures, followed by a further deposition-precipitation approach to obtain Pt/MoO_3-x catalysts (denoted as Pt/MoO_3-x-T, T = 300, 400, 500, and 600 °C). The optimized Pt/MoO_3-x-500 catalyst exhibits a prominent catalytic performance toward hydrolytic dehydrogenation of AB for H₂ generation, with a turnover frequency value of 2268.6 min^-1, which stands at the top level among the reported catalysts. Moreover, the catalyst shows a remarkable stability with 90% activity remaining after five cycles. A combination investigation including HR-TEM, ac-HAADF-STEM, XPS, in situ CO-IR, XANES, and Bader charge analysis verifies the formation of Pt²⁺-O_v-Mo⁵⁺ (O_v represents oxygen vacancy), whose concentration is dependent on the strength of the metal-support interaction. Studies on the structure-property correlation based on an isotopic kinetic experiment, in situ FT-IR, and DFT calculations further reveal that the Mo⁵⁺-O_v sites accelerate the dissociation of H₂O molecules (rate-determining step), while the adjacent Pt²⁺ species facilitates the cleavage of the B-H bond in the AB molecule to produce H₂. This work provides a fundamental and systematic understanding on the metal-support synergistic catalysis toward robust H₂ production, which is constructive for hydrogen storage and energy catalysis.

Crystalline Phase Induced Raman Enhancement on Molybdenum Carbide

Crystalline phase can greatly influence the Raman enhancement on semiconductor materials. Here, we demonstrate the crystalline phase induced Raman enhancement on molybdenum carbide materials (β-Mo2C and α-MoC). From all the...