Controlled Formation of Heteroleptic [Pd2(La)2(Lb)2]4+ Cages

A Reduced-Symmetry Pd2L4 Cage from a Heterotopic Dipyridyl Ligand

Two dipyridyl ligands, L3,3 and L3,4, have been used in combination with palladium(II) in the construction of metallosupramolecular species that show anion-dependent behavior in solution. A rare example of a low-symmetry (C2h) lantern-type cage is formed in one instance, [Pd2(L3,3)4]4+, while the isomeric ligand yields a larger double-walled square complex, [Pd4(L3,4)8]8+. [Pd2(L3,3)4](NO3)4 was isolated in crystalline form revealing two anions within the interior of the C2h-symmetry cage. The cage itself is held together by hydrogen bonding between "head-to-tail" pairs of ligands that reinforces the symmetry generated by the ditopic ligands. In solution, the cage with NO3- has sharp 1H nuclear magnetic resonance (NMR) signals at room temperature, while the BF4- analogue has broad signals that sharpen at higher temperatures or upon addition of (Bu4N)(NO3), highlighting the importance of the anion in templating or otherwise influencing self-assembly in solution. Altering the substitution position of one of the pyridyl rings yields a more "open" complex, with [Pd4(L3,4)8](NO3)8 being isolated as a crystalline solid. The double-walled square complex has a greater Pd···Pd separation due to the increased angle that the pyridyl groups subtend at the core of the ligand. NMR spectroscopy and mass spectrometry studies suggest a single species in the presence of nitrate but multiple species with tetrafluoroborate.

Photoswitchable Catalysis by a Self-Assembled Molecular Cage

A heteroleptic [Pd2L2L'2]4+ coordination cage containing a photoswitchable azobenzene-derived ligand catalyzes the Michael addition reaction between methyl vinyl ketone and benzoyl nitromethane within its cavity. The corresponding homoleptic cages are catalytically inactive. The heteroleptic cage can be reversibly disassembled and reassembled using 530 and 405 nm light, respectively, allowing catalysis within the cage to be switched OFF and ON at will.

Self-assembled Co(II) and Co(III) [M2L3] helicates and [M4L6] tetrahedra from an unsymmetrical quaterpyridine ligand

In order to bind guest molecules with exquisite selectivity, biological host molecules often employ low symmetry binding pockets. The majority of metallosupramolecular assemblies, however, rely on symmetrical ligands to form high-symmetry assemblies that enclosing similarly symmetrical cavities. Here we employ an unsymmetrical quaterpyridine ligand in combination with cobalt(II) to form a mixture of low-symmetry [M2L3] helicates and [M4L6] tetrahedra and their subsequent oxidation to Co(III)-containing assemblies.

Shape-Complementary Multicomponent Assembly of Low-Symmetry Co(III)Salphen-Based Coordination Cages

While metal-mediated self-assembly is a popular technique to construct discrete nanosized objects, highly symmetric structures, built from one type of ligand at a time, are dominating reported systems. The tailored integration of a set of different ligands requires sophisticated approaches to avoid narcissistic separation or formation of statistical mixtures. Here, we demonstrate how the combination of three structure-guiding effects (metal-templated macrocyclization, additional bridging ligands and shape-complementarity) based on Co(III)salphen metal nodes allows for a rational and high-yielding synthesis of structurally complex, lantern-shaped cages with up to four differentiable bridges. Three new heteroleptic coordination cages based on dinuclear Co(III)salphen macrocycles were synthesized in a one-pot reaction approach and fully characterized, including single crystal X-ray analyses. One cage groups two of the same ligands, another two different ligands around a symmetric Co2-bis-salphen ring. In the most complex structure, this ring is unsymmetric, rendering all four connections between the two metal centers distinguishable. While heteroleptic assembly around Pd(II) nodes has been shown to be dynamic, beneficial for cage-to-cage transformations, assembly cascades and adaptive systems, the herein introduced cages based on kinetically more inert Co(III)salphen will be advantageous for applications in enzyme-like catalysis and molecular machinery that require enhanced structural and chemical stability.

Stabilization of Lantern-Type Metal-Organic Cages (MOCs) by Protective Control of Ligand Exchange Rates

Self-assembling systems in nature display remarkable complexity with assemblies of different sub-units to generate functional species. Synthetic analogues of such systems are a challenge, often requiring the ability to bias distributions that are under thermodynamic assembly control. Using lantern-type MOCs (metal-organic cages) as a prototypical self-assembling system, herein we explore the role that steric bulk plays in controlling the exchange rate of ligands in paddlewheel-based assemblies, and thus the stability of cages, in competitive self-assembling scenarios. The effective lifetime of the lantern-type MOCs varies over an order of magnitude depending on the steric bulk proximal to the metal nodes with lifetimes of the cages ranging from tens of minutes to several hours. The bulk of the coordinating solvents likewise reduces the rate of ligand exchange, and thus yields longer-lived species. Understanding this subtle effect has implications for controlling the stability of complex assemblies in competitive environments with implications for guest release and application.

Non-statistical assembly of multicomponent [Pd2ABCD] cages

Self-assembled hosts, inspired by biological receptors and catalysts, show application potential in sustainable synthesis, energy conversion and medicine. Implementing multiple functionalities in the form of distinguishable building blocks, however, is difficult without risking narcissistic self-sorting or a statistical mess. Here we report a systematic series of integratively self-assembled heteroleptic cages in which two square-planar PdII cations are bridged by four different bis-pyridyl ligands, A, B, C and D, via synergistic effects to exclusively form a single isomer-the lantern-shaped cage [Pd2ABCD]. This self-sorting goal-forming just one out of 55 possible structures-is reached under full thermodynamic control and can be realized progressively (by combining progenitors, such as [Pd2A2C2] with [Pd2B2D2]), directly from ligands and PdII cations or by mixing all four corresponding homoleptic cages. The rational design of complex multicomponent assemblies that enables the modular incorporation of diverse chemical moieties will advance their applicability in functional nanosystems.

Heteromeric Completive Self-Sorting in Coordination Cage Systems

Heteroleptic coordination cages, nonstatistically assembled from a set of matching ligands, can be obtained by mixing individual components or via cage-to-cage transformations from homoleptic precursors. Based on the latter approach, we here describe a new level of self-sorting in coordination cage systems, namely, 'heteromeric completive self-sorting'. Here, two heteroleptic assemblies of type Pd2A2B2 and Pd2A2C2, sharing one common ligand component A but differing in the other, are shown to coexist in solution. This level of self-sorting can be reached either from a statistical mixture of assemblies based on some ligands B and C or, alternatively, following a first step of integrative self-sorting giving a distinct Pd2B2C2 intermediate. While subtle enthalpic factors dictate the outcome of the self-sorting, we found that it is controllable. From a unique set of three ligands, we demonstrate the transition from strict integrative self-sorting forming a Pd2AB2C cage to heteromeric completive self-sorting to give Pd2A2B2 and Pd2A2C2 by variation of the ligand ratio. Cage-to-cage transformations were followed by NMR and MS experiments. Single crystal X-ray structures for three new heteroleptic cages were obtained, impressively highlighting the versatility of ligand A to either form a π-stacked trans-figure-of-eight arrangement in Pd2A2B2 or occupy two cis-edges in Pd2A2C2 or only a single edge in Pd2AB2C. This study paves the way toward the control of heteroleptic cage populations in a systems chemistry context with emerging features such as chemical information processing, adaptive guest selectivity, or stimuli-responsive catalytic action.

Triamine and Tetramine Edge-Length Matching Drives Heteroleptic Triangular and Tetragonal Prism Assembly

Heteroleptic metal-organic capsules, which incorporate more than one type of ligand, can provide enclosed, anisotropic interior cavities for binding low-symmetry molecules of biological and industrial importance. However, the selective self-assembly of a single mixed-ligand architecture, as opposed to the numerous other possible self-assembly outcomes, remains a challenge. Here, we develop a design strategy for the subcomponent self-assembly of heteroleptic metal-organic architectures with anisotropic internal void spaces. Zn6Tet3Tri2 triangular prismatic and Zn8Tet2Tet'4 tetragonal prismatic architectures were prepared through careful matching of the side lengths of the tritopic (Tri) or tetratopic (Tet, Tet') and panels.

Assembly of Six Types of Heteroleptic Pd2L4 Cages under Kinetic Control

Heteroleptic assemblies composed of several kinds of building blocks have been seen in nature. It is still unclear how natural systems design and create such complicated assemblies selectively. Past efforts on multicomponent self-assembly of artificial metal-organic cages have mainly focused on finding a suitable combination of building blocks to lead to a single multicomponent self-assembly as the thermodynamically most stable product. Here, we present another approach to selectively produce multicomponent Pd(II)-based self-assemblies under kinetic control based on the selective ligand exchanges of weak Pd-L coordination bonds retaining the original orientation of the metal centers in a kinetically stabilized cyclic structure and on local reversibility given in certain areas of the energy landscape in the presence of the assist molecule that facilitates error correction of coordination bonds. The kinetic approach enabled us to build all six types of Pd2L4 cages and heteroleptic tetranuclear cages composed of three kinds of ditopic ligands. Although the cage complexes thus obtained are metastable, they are stable for 1 month or more at room temperature.

Diastereoselective Self-Assembly of Low-Symmetry Pdn L2n Nanocages through Coordination-Sphere Engineering

Metal-organic cages (MOCs) are popular host architectures assembled from ligands and metal ions/nodes. Assembling structurally complex, low-symmetry MOCs with anisotropic cavities can be limited by the formation of statistical isomer libraries. We set out to investigate the use of primary coordination-sphere engineering (CSE) to bias isomer selectivity within homo- and heteroleptic Pdn L2n cages. Unexpected differences in selectivities between alternative donor groups led us to recognise the significant impact of the second coordination sphere on isomer stabilities. From this, molecular-level insight into the origins of selectivity between cis and trans diastereoisomers was gained, highlighting the importance of both host-guest and host-solvent interactions, in addition to ligand design. This detailed understanding allows precision engineering of low-symmetry MOC assemblies without wholesale redesign of the ligand framework, and fundamentally provides a theoretical scaffold for the development of stimuli-responsive, shape-shifting MOCs.

A Lantern-Shaped Pd(II) Cage Constructed from Four Different Low-Symmetry Ligands with Positional and Orientational Control: An Ancillary Pairings Approach

One of the key challenges of metallo-supramolecular chemistry is to maintain the ease of self-assembly but, at the same time, create structures of increasingly high levels of complexity. In palladium(II) quadruply stranded lantern-shaped cages, this has been achieved through either 1) the formation of heteroleptic (multi-ligand) assemblies, or 2) homoleptic assemblies from low-symmetry ligands. Heteroleptic cages formed from low-symmetry ligands, a hybid of these two approaches, would add an additional rich level of complexity but no examples of these have been reported. Here we use a system of ancillary complementary ligand pairings at the termini of cage ligands to target heteroleptic assemblies: these complementary pairs can only interact (through coordination to a single Pd(II) metal ion) between ligands in a cis position on the cage. Complementarity between each pair (and orthogonality to other pairs) is controlled by denticity (tridentate to monodentate or bidentate to bidentate) and/or hydrogen-bonding capability (AA to DD or AD to DA). This allows positional and orientational control over ligands with different ancillary sites. By using this approach, we have successfully used low-symmetry ligands to synthesise complex heteroleptic cages, including an example with four different low-symmetry ligands.

Pathway selection in the self-assembly of Rh4L4 coordination squares under kinetic control

Pathway selection principles in reversible reaction networks such as molecular self-assembly have not been established yet, because achieving kinetic control in reversible reaction networks is more complicated than in irreversible ones. In this study, we discovered that coordination squares consisting of cis-protected dinuclear rhodium(II) corner complexes and linear ditopic ligands are assembled under kinetic control, perfectly preventing the corresponding triangles, by modulating their energy landscapes with a weak monotopic carboxylate ligand (2,6-dichlorobenzoate: dcb-) as the leaving ligand. Experimental and numerical approaches revealed the self-assembly pathway where the cyclization step to form the triangular complex is blocked by dcb-. It was also found that one of the molecular squares assembled into a dimeric structure owing to the solvophobic effect, which was characterized by nuclear magnetic resonance spectroscopy and single-crystal X-ray analysis.

Pd12MnL24 (for n = 6, 8, 12) nanospheres by post-assembly modification of Pd12L24 spheres

In this contribution, we describe a post-assembly modification approach to selectively coordinate transition metals in Pd12L24 cuboctahedra. The herein reported approach involves the preparation of Pd12L24 nanospheres with protonated nitrogen donor ligands that are covalently linked at the interior. The so obtained Pd12(LH+)24 nanospheres are shown to be suitable for coordinative post-modification after deprotection by deprotonation. Selective formation of tetra-coordinated MB in Pd12MB6L24, tri-coordinated MB in Pd12MB8L24 nanospheres and two-coordinated MB in Pd12MB12L24 nanospheres is achieved as a result of different nitrogen donor ligands. A combination of pulsed EPR spectroscopy (DEER) to measure Cu-Cu distances in the different spheres, NMR studies and computational investigations, support the presence of the complexes at precise locations of the Pd12MB6L24 nanosphere. The general post-assembly modification methodology can be extended using other transition metal precursors or supramolecular systems and can guide precise formation and investigation of novel transition metal-complex containing nanospheres with well-defined composition.

Exploiting reduced-symmetry ligands with pyridyl and imidazole donors to construct a second-generation stimuli-responsive heterobimetallic [PdPtL4]4+ cage

A new sequential metalation strategy that enables the assembly of a new more robust reduced symmetry heterobimetallic [PdPtL4]4+ cage C is reported. By exploiting a low-symmetry ditopic ligand (L) that features imidazole and pyridine donor units we were able to selectively form a [Pt(L)4]2+ "open-cage" complex. When this was treated with Pd(ii) ions the cage C assembled. 1H and DOSY nuclear magnetic resonance (NMR) spectroscopy and electrospray ionisation mass spectrometry (ESIMS) data were consistent with the quantitative formation of the cage and the heterobimetallic structure was confirmed by single crystal X-ray crystallography. The cage C was shown to bind anionic guest molecules. NMR studies suggested that these guests interacted with the cavity of the cage in a specific orientation and this was confirmed for the mesylate ion (MsO-) : C host-guest adduct using X-ray crystallography. In addition, the system was shown to be stimulus-responsive and could be opened and closed on demand when treated with appropriate stimuli. If a guest molecule was bound within the cage, the opening and closing was accompanied by the release and re-uptake of the guest molecule.

Phototriggered structures: Latest advances in biomedical applications

Non-invasive control of the drug molecules accessibility is a key issue in improving diagnostic and therapeutic procedures. Some studies have explored the spatiotemporal control by light as a peripheral stimulus. Phototriggered drug delivery systems (PTDDSs) have received interest in the past decade among biological researchers due to their capability the control drug release. To this end, a wide range of phototrigger molecular structures participated in the DDSs to serve additional efficiency and a high-conversion release of active fragments under light irradiation. Up to now, several categories of PTDDSs have been extended to upgrade the performance of controlled delivery of therapeutic agents based on well-known phototrigger molecular structures like o-nitrobenzyl, coumarinyl, anthracenyl, quinolinyl, o-hydroxycinnamate and hydroxyphenacyl, where either of one endows an exclusive feature and distinct mechanistic approach. This review conveys the design, photochemical properties and essential mechanism of the most important phototriggered structures for the release of single and dual (similar or different) active molecules that have the ability to quickly reason of the large variety of dynamic biological phenomena for biomedical applications like photo-regulated drug release, synergistic outcomes, real-time monitoring, and biocompatibility potential.

In vivo biodistribution of kinetically stable Pt2L4 nanospheres that show anti-cancer activity

There is an increasing interest in the application of metal-organic cages (MOCs) in a biomedicinal context, as they can offer non-classical distribution in organisms compared to molecular substrates, while revealing novel cytotoxicity mechanisms. Unfortunately, many MOCs are not sufficiently stable under in vivo conditions, making it difficult to study their structure-activity relationships in living cells. As such, it is currently unclear whether MOC cytotoxicity stems from supramolecular features or their decomposition products. Herein, we describe the toxicity and photophysical properties of highly-stable rhodamine functionalized platinum-based Pt₂L₄ nanospheres as well as their building blocks under in vitro and in vivo conditions. We show that in both zebrafish and human cancer cell lines, the Pt₂L₄ nanospheres demonstrate reduced cytotoxicity and altered biodistribution within the body of zebrafish embryos compared to the building blocks. We anticipate that the composition-dependent biodistribution of Pt₂L₄ spheres together with their cytotoxic and photophysical properties provides the fundament for MOC application in cancer therapy.

Secondary Bracing Ligands Drive Heteroleptic Cuboctahedral PdII12 Cage Formation

The structural complexity of self-assembled metal-organic capsules can be increased by incorporating two or more different ligands into a single discrete product. Such complexity can be useful, by enabling larger, less-symmetrical, or more guests to be bound. Here we describe a rational design strategy for the use of subcomponent self-assembly to selectively prepare a heteroleptic cage with a large cavity volume (2631 ų) from simple, commercially available starting materials. Our strategy involves the initial isolation of a tris(iminopyridyl) Pd^II₃ complex 1, which reacts with tris(pyridyl)triazine ligand 2 to form a heteroleptic sandwich-like architecture 3. The tris(iminopyridyl) ligand within 3 serves as a "brace" to control the orientations of the labile coordination sites on the Pd^II centers. Self-assembly of 3 with additional 2 was thus directed to generate a large Pd^II₁₂ heteroleptic cuboctahedron host. This new cuboctahedron was observed to bind multiple polycyclic aromatic hydrocarbon guests simultaneously.

Theoretical and computational methodologies for understanding coordination self-assembly complexes

This perspective highlights three theoretical and computational methods to capture the coordination self-assembly processes at the molecular level: quantum chemical modeling, molecular dynamics, and reaction network analysis. These methods cover the different scales from the metal-ligand bond to a more global aspect, and approaches that are best suited to understand the coordination self-assembly from different perspectives are introduced. Theoretical and numerical researches based on these methods are not merely ways of interpreting the experimental studies but complementary to them.

Bioinspired complexes confined in well-defined capsules: getting closer to metalloenzyme functionalities

Reproducing the key features offered by metalloprotein binding cavities is an attractive approach to overcome the main bottlenecks of current open artificial models (in terms of stability, efficiency and selectivity). In this context, this featured article brings together selected examples of recent developments in the field of confined bioinspired complexes with an emphasis on the emerging hemicryptophane caged ligands. In particular, we focused on (1) the strategies allowing the insulation and protection of complexes sharing similarities with metalloprotein active sites, (2) the confinement-induced improvement of catalytic efficiencies and selectivities and (3) very recent efforts that have been made toward the development of bioinspired complexes equipped with weakly binding artificial cavities.

Modular enhancement of circularly polarized luminescence in Pd2A2B2 heteroleptic cages

Metal-mediated assembly allows us to combine an achiral emissive ligand A with different chiral ligands (such as B) in a non-statistical fashion, obtaining Pd₂A₂B₂ heteroleptic cages showing circularly polarized luminescence (CPL). By using the 'shape complementary assembly' (SCA) strategy, the cages are exclusively obtained as cis-Pd₂A₂B₂ stereoisomers, as confirmed by NMR, MS and DFT analyses. Their unique chiroptical properties derive from the synergy of all the building blocks. Ligand B imparts the chiral information of its aliphatic backbone, comprising two stereogenic sp³ carbon centres, to the overall structure, causing CD and CPL signal induction for the chromophore on ligand A. The heteroleptic cage shows CPL with a |g_lum| value of 2.5 × 10^-3, which is 3-times higher than that for a progenitor based on aromatic helical building block H, thus opening a rational route towards optimizing the CPL properties of self-assembled nanostructures in a modular way.

Ferrocene-Derived Palladium(II)-Based Metallosupramolecular Structures: Synthesis, Guest Interaction, and Stimulus-Responsiveness Studies

Using ferrocene-based ligand systems, a series of heterobimetallic architectures of the general formula [Pd_mL_n]^x+ were designed with the aim of installing an opening and closing mechanism that would allow the release and binding of guest molecules. Palladium complex formation was achieved through coordination to pyridyl groups, and using 2-, 3-, and 4-pyridyl derivatives provided access to defined PdL, PdL₂, and Pd₂L₄ structures, respectively. The supramolecular complexes were characterized using nuclear magnetic resonance (NMR) and infrared spectroscopy, mass spectrometry, and elemental analysis, and for some examples density functional theory calculations and single-crystal X-ray diffraction analysis. ¹H NMR spectroscopy was used to investigate disassembly and reassembly of the metallosupramolecular structures. The former was induced by cleavage of the relatively labile Pd-N_pyridyl bonds with the introduction of the competing ligands N,N'-dimethylaminopyridine (DMAP) and Cl^- (using tetrabutylammonium chloride) to yield [Pd(DMAP)₄]²⁺ and [PdCl₄]^2-, respectively. The process was found to be reversible for several of the heterodimetallic compounds, with the addition of H⁺ or Ag⁺ triggering complex reassembly. Guest binding studies with several architectures revealed interactions with the anionic guests p-toluenesulfonate and octyl sulfate, but not with neutral molecules. Furthermore, the release of guests was reversibly induced with Cl^- ions as a stimulus.

Probing the Importance of Host Symmetry on Carbohydrate Recognition

The design of molecular cages with low symmetry could allow for more specific tuning of their properties and better mimic the unsymmetrical and complex environment of protein pockets. However, the added value of lowering symmetry of molecular receptors has been rarely demonstrated. Herein, C₃ - and C₁ -symmetrical cages, presenting the same recognition sites, have been synthesized and investigated as hosts for carbohydrate recognition. Structurally related derivatives of glucose, galactose and mannose were found to have greater affinity to the receptor with the lowest symmetry than to their C₃ -symmetrical analogue. According to the host cavity modelling, the C₁ symmetry receptor exhibits a wider opening than its C₃ -symmetrical counterpart, providing easier access and thus promoting guest proximity to binding sites. Moreover, our results show the high stereo- and substrate selectivity of the C₁ symmetry cage with respect to its C₃ counterpart in the recognition of sugars.

Exploiting Supramolecular Interactions to Control Isomer Distributions in Reduced-Symmetry [Pd2L4]4+ Cages

High-symmetry metallosupramolecular architectures (MSAs) have been exploited for a range of applications including molecular recognition, catalysis, and drug delivery. Recently, there have been increasing efforts to enhance those applications by generating reduced-symmetry MSAs. Here we report our attempts to use supramolecular (dispersion and hydrogen-bonding) forces and solvophobic effects to generate isomerically pure [Pd₂(L)₄]⁴⁺ cage architectures from a family of new reduced-symmetry ditopic tripyridyl ligands. The reduced-symmetry tripyridyl ligands featured either solvophilic polyether chains, solvophobic alkyl chains, or amino substituents. We show using NMR spectroscopy, high-performance liquid chromatography, X-ray diffraction data, and density functional theory calculations that the combination of dispersion forces and solvophobic effects does not provide any control of the [Pd₂(L)₄]⁴⁺ isomer distribution with mixtures of all four cage isomers (HHHH, HHHT, cis-HHTT, or trans-HTHT, where H = head and T = tail) obtained in each case. More control was obtained by exploiting hydrogen-bonding interactions between amino units. While the cage assembly with a 3-amino-substituted tripyridyl ligand leads to a mixture of all four possible isomers, the related 2-amino-substituted tripyridyl ligand generated a cis-HHTT cage architecture. Formation of the cis-HHTT [Pd₂(L)₄]⁴⁺ cage was confirmed using NMR studies and X-ray crystallography.

Metallic–Organic Cages (MOCs) with Heterometallic Character: Flexibility-Enhancing MOFs

The dichotomy between metal–organic frameworks (MOFs) and metal–organic cages (MOCs) opens up the research spectrum of two fields which, despite having similarities, both have their advantages and disadvantages. Due to the fact that they have cavities inside, they also have applicability in the porosity sector. Bloch and coworkers within this evolution from MOFs to MOCs manage to describe a MOC with a structure of Cu2 paddlewheel Cu4L4 (L = bis(pyrazolyl)methane) with high precision thanks to crystallographic analyses of X-ray diffraction and also SEM-EDX. Then, also at the same level of concreteness, they were able to find the self-assembly of Pd(II)Cl2 moieties on the available nitrogen donor atoms leading to a [Cu4(L(PdCl2))4] structure. Here, calculations of the DFT density functional allow us to reach an unusual precision given the magnitude and structural complexity, explaining how a pyrazole ring of each bis(pyprazolyl)methane ligand must rotate from an anti to a syn conformation, and a truncation of the MOC structure allows us to elucidate, in the absence of the MOC constraint and its packing in the crystal, that the rotation is almost barrierless, as well as also explain the relative stability of the different conformations, with the anti being the most stable conformation. Characterization calculations with Mayer bond orders (MBO) and noncovalent interaction (NCI) plots discern what is important in the interaction of this type of cage with PdCl2 moieties, also CuCl2 by analogy, as well as simple molecules of water, since the complex is stable in this solvent. However, the L ligand is proved to not have the ability to stabilize an H2O molecule.

Controlled Construction of Heteroleptic [Pd2 (LA )2 (LB )(LC )]4+ Cages: A Facile Approach for Site-Selective endo-Functionalization of Supramolecular Cavities

Construction of supramolecular structures with internal functionalities is a promising approach to build enzyme-like cavities. The endo-functionalized [Pd₁₂ L₂₄ ] and [Pd₂ L₄ ] coordination cages represent the most successful systems in this regard. However, these systems mainly contain one type of endo-moiety. We herein provide a solution for the controlled endo-functionalization of [Pd₂ L₄ ] cages. Site-selective introduction of the endo-functional group was achieved through the formation of heteroleptic [Pd₂ (L^A )₂ (L^B )(L^C )] cages. Using two orthogonal steric control elements is the key for the selective formation of the hetero-assemblies. We demonstrated the construction of two hetero-cages with a single internal functional group as well as a hetero-cage with two distinct endohedral functionalities. The endo-functionalized hetero-cages bound sulfonate guests with fast-exchange dynamics. This strategy provides a new solution for the controlled endo-functionalization of supramolecular cavities.

Symmetry-breaking host-guest assembly in a hydrogen-bonded supramolecular system

Bio-inspired self-assembly is invaluable to create well-defined giant structures from small molecular units. Owing to a large entropy loss in the self-assembly process, highly symmetric structures are typically obtained as thermodynamic products while formation of low symmetric assemblies is still challenging. In this study, we report the symmetry-breaking self-assembly of a defined C₁-symmetric supramolecular structure from an O_h-symmetric hydrogen-bonded resorcin[4]arene capsule and C₂-symmetric cationic bis-cyclometalated Ir complexes, carrying sterically demanding tertiary butyl (^tBu) groups, on the basis of synergistic effects of weak binding forces. The flexible capsule framework shows a large structural change upon guest binding to form a distorted resorcin[4]arene hexameric capsule, providing an asymmetric cavity. Location of the chiral guest inside the anisotropic environment leads to modulation of its Electric Dipole (ED) and Magnetic Dipole (MD) transition moments in the excited state, causing an increased emission quantum yield, longer emission lifetime, and enhancement of the dissymmetry factor (g_lum) in the circularly polarized luminescence.

Endohedrally Functionalized Heteroleptic Coordination Cages for Phosphate Ester Binding

Metallosupramolecular hosts of nanoscopic dimensions, which are able to serve as selective receptors and catalysts, are usually composed of only one type of organic ligand, restricting diversity in terms of cavity shape and functional group decoration. We report a series of heteroleptic [Pd₂ A₂ B₂ ] coordination cages that self-assemble from a library of shape complementary bis-monodentate ligands in a non-statistical fashion. Ligands A feature an inward pointing NH function, able to engage in hydrogen bonding and amenable to being functionalized with amide and alkyl substituents. Ligands B comprise tricyclic aromatic backbones of different shape and electronic situation. The obtained heteroleptic coordination cages were investigated for their ability to bind phosphate diesters as guests. All-atom molecular dynamics (MD) simulations in explicit solvent were conducted to understand the mechanistic relationships behind the experimentally determined guest affinities.

Pseudo-heterolepticity in Low-Symmetry Metal-Organic Cages

Heteroleptic metal-organic cages, formed through integrative self-assembly of ligand mixtures, are highly attractive as reduced symmetry supramolecular hosts. Ensuring high-fidelity, non-statistical self-assembly, however, presents a significant challenge in molecular engineering due to the inherent difficulty in predicting thermodynamic energy landscapes. In this work, two conceptual strategies are described that circumvent this issue, using ligand design strategies to access structurally sophisticated metal-organic hosts. Using these approaches, it was possible to realise cavity environments described by two inequivalent, unsymmetrical ligand frameworks, representing a significant step forward in the construction of highly anisotropic confined spaces.

Orientational self-sorting in cuboctahedral Pd cages

Cuboctahedral coordination cages of the general formula [Pd12L24]24+ (L = low-symmetry ligand) were analyzed theoretically and experimentally. With 350 696 potential isomers, the structural space of these assemblies is vast. Orientational self-sorting refers to the preferential formation of particular isomers within the pool of potential structures. Geometric and computational analyses predict the preferred formation of cages with a cis arrangement at the metal centers. This prediction was corroborated experimentally by synthesizing a [Pd12L24]24+ cage with a bridging 3-(4-(pyridin-4-yl)phenyl)pyridine ligand. A crystallographic analysis of this assembly showed exclusive cis coordination of the 3- and the 4-pyridyl donor groups at the Pd2+ ions.

Guest‐Modulated Circularly Polarized Luminescence by Ligand‐to‐Ligand Chirality Transfer in Heteroleptic Pd II Coordination Cages

Multicomponent metallo‐supramolecular assembly allows the rational combination of different building blocks. Discrete multifunctional hosts with an accessible cavity can be prepared in a non‐statistical fashion. We employ our shape‐complementary assembly (SCA) method to achieve for the first time integrative self‐sorting of heteroleptic Pd^II cages showing guest‐tunable circularly polarized luminescence (CPL). An enantiopure helicene‐based ligand (M or P configuration) is coupled with a non‐chiral emissive fluorenone‐based ligand (A or B) to form a series of Pd₂L₂L′₂ assemblies. The modular strategy allows to impart the chiral information of the helicenes to the overall supramolecular system, resulting in CPL from the non‐chiral component. Guest binding results in a 4‐fold increase of CPL intensity. The principle offers potential to generate libraries of multifunctional materials with applications in molecular recognition, enantioselective photo‐redox catalysis and information processing.

Assembly of a Heterometallic Cu(II)-Pd(II) Cage by Post-assembly Metal Insertion

Porous structures based on multi-metallic motifs are receiving growing interest, but their general preparation still remains a challenge. Here, we report the self-assembly and structure of a Cu^II metal-organic cage (MOC) that is functionalized with free bis(pyrazolyl)methane sites. The homometallic Cu₄L₄ cage is isolated as a water-stable crystalline solid, and its formation is dependent on metal-ligand stoichiometry and the pre-organization of the Cu₂ paddlewheel. We show by X-ray diffraction and SEM-EDX that Pd^II chloride can be quantitatively inserted into the free chelating sites of the MOC to yield a [Cu₄(L(PdCl₂))₄] structure. Moreover, the solvent employed in the metalation dictates the solid-state isomerism of the heterometallic cage─a further handle to control the MOC's structural diversity and permanent porosity.

Transformation networks of metal-organic cages controlled by chemical stimuli

The flexibility of biomolecules enables them to adapt and transform as a result of signals received from the external environment, expressing different functions in different contexts. In similar fashion, coordination cages can undergo stimuli-triggered transformations owing to the dynamic nature of the metal-ligand bonds that hold them together. Different types of stimuli can trigger dynamic reconfiguration of these metal-organic assemblies, to switch on or off desired functionalities. Such adaptable systems are of interest for applications in switchable catalysis, selective molecular recognition or as transformable materials. This review highlights recent advances in the transformation of cages using chemical stimuli, providing a catalogue of reported strategies to transform cages and thus allow the creation of new architectures. Firstly we focus on strategies for transformation through the introduction of new cage components, which trigger reconstitution of the initial set of components. Secondly we summarize conversions triggered by external stimuli such as guests, concentration, solvent or pH, highlighting the adaptation processes that coordination cages can undergo. Finally, systems capable of responding to multiple stimuli are described. Such systems constitute composite chemical networks with the potential for more complex behaviour. We aim to offer new perspectives on how to design transformation networks, in order to shed light on signal-driven transformation processes that lead to the preparation of new functional metal-organic architectures.

Shape Complementary Coordination Self-Assembly of a Redox-Active Heteroleptic Complex

We present here the coordination self-assembly of a new heteroleptic (bpyPd)₄L¹L₂² coordination complex (1) from one novel pyridinium-functionalized bis-2,4,6-tris(pyridin-3-yl)-1,3,5-triazine (bis-3-TPT, L¹) macrocyclic ligand, two separate 3-TPT (L²) ligands, and four cis-blocking bpyPd(NO₃)₂ (bpy = 2,2'-bipyridine). While homoleptic self-assemblies with either L¹ or L² gave dynamic mixtures of products, a single thermodynamic heteroleptic complex was obtained driven by the shape complementarity of building blocks. Moreover, the redox-active nature of the heteroleptic assembly facilitates the highly efficient catalytic aerobic photo-oxidation of aromatic secondary alcohols under mild conditions.

Beyond Platonic: How to Build Metal-Organic Polyhedra Capable of Binding Low-Symmetry, Information-Rich Molecular Cargoes

The field of metallosupramolecular chemistry has advanced rapidly in recent years. Much work in this area has focused on the formation of hollow self-assembled metal-organic architectures and exploration of the applications of their confined nanospaces. These discrete, soluble structures incorporate metal ions as 'glue' to link organic ligands together into polyhedra.Most of the architectures employed thus far have been highly symmetrical, as these have been the easiest to prepare. Such high-symmetry structures contain pseudospherical cavities, and so typically bind roughly spherical guests. Biomolecules and high-value synthetic compounds are rarely isotropic, highly-symmetrical species. To bind, sense, separate, and transform such substrates, new, lower-symmetry, metal-organic cages are needed. Herein we summarize recent approaches, which taken together form the first draft of a handbook for the design of higher-complexity, lower-symmetry, self-assembled metal-organic architectures.

Heteroleptic metallosupramolecular aggregates/complexation for supramolecular catalysis

Supramolecular catalysis is reviewed with an eye on heteroleptic aggregates/complexation. Since most of the current metallosupramolecular catalytic systems are homoleptic in nature, the idea of breaking/reducing symmetry has ignited a vivid search for heteroleptic aggregates that are made up by different components. Their higher degree of functional diversity and structural heterogeneity allows, as demonstrated by Nature by the multicomponent ATP synthase motor, a more detailed and refined configuration of purposeful machinery. Furthermore, (metallo)supramolecular catalysis is shown to extend beyond the single "supramolecular unit" and to reach far into the field and concepts of systems chemistry and information science.

Computational Modeling of Supramolecular Metallo-organic Cages-Challenges and Opportunities

Self-assembled metallo-organic cages have emerged as promising biomimetic platforms that can encapsulate whole substrates akin to an enzyme active site. Extensive experimental work has enabled access to a variety of structures, with a few notable examples showing catalytic behavior. However, computational investigations of metallo-organic cages are scarce, not least due to the challenges associated with their modeling and the lack of accurate and efficient protocols to evaluate these systems. In this review, we discuss key molecular principles governing the design of functional metallo-organic cages, from the assembly of building blocks through binding and catalysis. For each of these processes, computational protocols will be reviewed, considering their inherent strengths and weaknesses. We will demonstrate that while each approach may have its own specific pitfalls, they can be a powerful tool for rationalizing experimental observables and to guide synthetic efforts. To illustrate this point, we present several examples where modeling has helped to elucidate fundamental principles behind molecular recognition and reactivity. We highlight the importance of combining computational and experimental efforts to speed up supramolecular catalyst design while reducing time and resources.

Heterotrimetallic Double Cavity Cages: Syntheses and Selective Guest Binding

A strategy for the generation of heterotrimetallic double cavity (DC) cages [Pd_nPt_mL₄]⁶⁺ (DC1: n=1, m=2; and DC2: n=2, m=1) is reported. The DC cages were generated by combining an inert platinum(II) tetrapyridylaldehyde complex with a suitably substituted pyridylamine and Pd^II ions. ¹H and DOSY nuclear magnetic resonance spectroscopy (NMR) and electrospray ionization mass spectrometry (ESIMS) data were consistent with the formation of the DC architectures. DC1 and DC2 were shown to interact with several different guest molecules. The structure of DC1, which features two identical cavities, binding two 2,6‐diaminoanthraquinone (DAQ) guest molecules was determined by single‐crystal X‐ray crystallography. In addition, DC1 was shown to bind two molecules of 5‐fluorouracil (5‐FU) in a statistical (non‐cooperative) manner. In contrast, DC2, which features two different cage cavities, was found to interact with two different guests, 5‐FU and cisplatin, selectively.

Visible-Light Switching of Metallosupramolecular Assemblies

A photoswitchable ligand and palladium(II) ions form a dynamic mixture of self-assembled metallosupramolecular structures. The photoswitching ligand is an ortho-fluoroazobenzene with appended pyridyl groups. Combining the E-isomer with palladium(II) salts affords a double-walled triangle with composition [Pd3 L6 ]6+ and a distorted tetrahedron [Pd4 L8 ]8+ (1 : 2 ratio at 298 K). Irradiation with 410 nm light generates a photostationary state with approximately 80 % of the E-isomer of the ligand and results in the selective disassembly of the tetrahedron, the more thermodynamically stable structure, and the formation of the triangle, the more kinetically inert product. The triangle is then slowly transformed back into the tetrahedron over 2 days at 333 K. The Z-isomer of the ligand does not form any well-defined structures and has a thermal half-life of 25 days at 298 K. This approach shows how a thermodynamically preferred self-assembled structure can be reversibly pumped to a kinetic trap by small perturbations of the isomer distribution using non-destructive visible light.

Molecular Assemblies Offering Hydrogen-Bonding Cavities: Influence of Macrocyclic Cavity and Hydrogen Bonding on Dye Adsorption

This work presents a set of Hg macrocycles of amide-phosphine-based ligands offering H-bonding cavities of different dimensions. Such macrocycles are shown to selectively adsorb anionic dyes followed by neutral dyes as well as Prontosil, a biologically relevant antibiotic, within their cavities with the aid of H-bonding-assisted encapsulation. Kinetic experiments supported by spectroscopic and docking studies illustrate the importance of the cavity structure as well as H-bonds for the selective adsorption of dyes.

Heteroleptic tripalladium(II) cages

There is a concerted attempt to develop self-assembled metallo-cages of greater structural complexity, and heteroleptic Pd II cages are emerging as prime candidates in these efforts. Most of these are dinuclear: few examples of higher nuclearity have been reported. We demonstrate here a robust method for the formation of tripalladium(II) cages from the 2:3:3 combination of a tritopic ligand, Pd II , and a selection of ditopic ligands of the correct size and geometry.

Cooperativity of steric bulk and H-bonding in coordination sphere engineering: heteroleptic PdII cages and bowls by design

Recently developed self-assembly strategies allow to rationally reduce the symmetry of metallosupramolecular architectures. In addition, the combination of multiple ligand types without creating compound mixtures has become possible. Among several approaches to realize non-statistical heteroleptic assembly, Coordination Sphere Engineering (CSE) makes use of secondary repulsive or attractive interactions in direct vicinity of the metal nodes. Previously, we used steric congestion to turn dinuclear [Pd2L4] cages with fourfold symmetry into [Pd2L3X2] (X = solvent, halide) bowl structures. Here, we introduce a new subtype of this strategy based on balancing hydrogen bonding and repulsive interactions between ligands carrying quinoline (LQu) and 1,8-naphthyridine (LNa) donors to generate trans-[Pd2L2] and [Pd2L3L'] cages, assisted by templation of encapsulated fullerenes. Combined with steric congestion caused by acridine (LAc) donors, we further report the first example of a heteroleptic [Pd2L2L'X2] bowl. Formation, structure and fullerene binding ability of these metallo-supramolecular hosts were studied by NMR, mass spectrometry and single crystal X-ray diffraction.

Molecular engineering of confined space in metal–organic cages

The host–guest chemistry of metal–organic cages can be modified through tailoring of structural aspects such as size, shape and functionality. In this review, strategies, opportunities and challenges of such molecular engineering are discussed.