Mechanism of Au(III)-Mediated Alkoxycyclization of a 1,6-Enyne

Experimental and Theoretical Investigation of Ion Pairing in Gold(III) Catalysts

The ion pairing structure of the possible species present in solution during the gold(III)-catalyzed hydration of alkynes: [(ppy)Au(NHC)Y]X2 and [(ppy)Au(NHC)X]X [ppy = 2-phenylpyridine, NHC = NHCiPr = 1,3-bis(2,6-di-isopropylphenyl)-imidazol-2-ylidene; NHC = NHCmes = 1,3-bis(2,4,6-trimethylphenyl)-imidazol-2-ylidene X = Cl-, BF4-, OTf-; Y = H2O and 3-hexyne] are determined. The nuclear overhauser effect nuclear magnetic resonance (NMR) experimental measurements integrated with a theoretical description of the system (full optimization of different ion pairs and calculation of the Coulomb potential surface) indicate that the preferential position of the counterion is tunable through the choice of the ancillary ligands (NHCiPr, NHCmes, ppy, and Y) in [(ppy)Au(NHC)(3-hexyne)]X2 activated complexes that undergo nucleophilic attack. The counterion can approach near NHC, pyridine ring of ppy, and gold atom. From these positions, the anion can act as a template, holding water in the right position for the outer-sphere attack, as observed in gold(I) catalysts.

Energetics of key Au(III)-substrate adducts relevant to catalytic hydroarylation of alkynes

(P,C)-cyclometalated Au(III) complexes have shown remarkable ability to catalyze the intermolecular hydroarylation of alkynes. Evidence of an outer-sphere mechanism has been provided in a previous study and is confirmed here by analysing the experimental data and DFT calculations. In this work, we propose evaluation of critical energies of dissociation of Au(III) complexes with different substrates via energy-resolved mass spectrometry (ERMS) experiments and kinetic modelling. The kinetic model is based on a multi-collisional approach. On the one hand, the classification confirms the mechanism previously proposed; on the other hand, it supports the collisional model and its application to particularly fragile adducts.

Mechanism of Alkyne Hydroarylation Catalyzed by (P,C)-Cyclometalated Au(III) Complexes

Over the last 5-10 years, gold(III) catalysis has developed rapidly. It often shows complementary if not unique features compared to gold(I) catalysis. While recent work has enabled major synthetic progress in terms of scope and efficiency, very little is yet known about the mechanism of Au(III)-catalyzed transformations and the relevant key intermediates have rarely been authenticated. Here, we report a detailed experimental/computational mechanistic study of the recently reported intermolecular hydroarylation of alkynes catalyzed by (P,C)-cyclometalated Au(III) complexes. The cationic (P,C)Au(OAc^F)⁺ complex (OAc^F = OCOCF₃) was authenticated by mass spectrometry (MS) in the gas phase and multi-nuclear NMR spectroscopy in solution at low temperatures. According to density functional theory (DFT) calculations, the OAc^F moiety is κ²-coordinated to gold in the ground state, but the corresponding κ¹-forms featuring a vacant coordination site sit only slightly higher in energy. Side-on coordination of the alkyne to Au(III) then promotes nucleophilic addition of the arene. The energy profiles for the reaction between trimethoxybenzene (TMB) and diphenylacetylene (DPA) were computed by DFT. The activation barrier is significantly lower for the outer-sphere pathway than for the alternative inner-sphere mechanism involving C-H activation of the arene followed by migratory insertion. The π-complex of DPA was characterized by MS. An unprecedented σ-arene Au(III) complex with TMB was also authenticated both in the gas phase and in solution. The cationic complexes [(P,C)Au(OAc^F)]⁺ and [(P,C)Au(OAc^F)(σ-TMB)]⁺ stand as active species and off-cycle resting state during catalysis, respectively. This study provides a rational basis for the further development of Au(III) catalysis based on π-activation.

Tunable Gold-catalyzed Reactions of Propargyl Alcohols and Aryl Nucleophiles

Gold‐catalyzed transformations of 1,3‐diarylpropargyl alcohols and various aryl nucleophiles were studied. Selective tunable synthetic methods were developed for 1,1,3‐triarylallenes, diaryl‐indenes and tetraaryl‐allyl target products by C3 nucleophilic substitution and subsequent intra‐ or intermolecular hydroarylation, respectively. The reactions were scoped with regards to gold(I)/(III) catalysts, solvent, temperature, and electronic and steric effects of both the diarylpropargyl alcohol and the aryl nucleophiles. High yields of triaryl‐allenes and diaryl‐indenes by gold(III) catalysis were observed. Depending on the choice of aryl nucleophile and control of reaction temperature, different product ratios have been obtained. Alternatively, tetraaryl‐allyl target products were formed by a sequential one‐pot tandem process from appropriate propargyl substrates and two different aryl nucleophiles. Corresponding halo‐arylation products (I and Br; up to 95 % 2‐halo‐diaryl‐indenes) were obtained in a one‐pot manner in the presence of the respective N‐halosuccinimides (NIS, NBS).

Phosphorus-Based Organocatalysis for the Dehydrative Cyclization of N-(2-Hydroxyethyl)amides into 2-Oxazolines

A metal-free, biomimetic catalytic protocol for the cyclization of N-(2-hydroxyethyl)amides to the corresponding 2-oxazolines (4,5-dihydrooxazoles), promoted by the 1,3,5,2,4,6-triazatriphosphorine (TAP)-derived organocatalyst tris(o-phenylenedioxy)cyclotriphosphazene (TAP-1) has been developed. This approach requires less precatalyst compared to the reported relevant systems, with respect to the phosphorus atom (the maximum turnover number (TON) ∼ 30), and exhibits a broader substrate scope and higher functional-group tolerance, providing the functionalized 2-oxazolines with retention of the configuration at the C(4) stereogenic center of the 2-oxazolines. Widely accessible β-amino alcohols can be used in this approach, and the cyclization of N-(2-hydroxyethyl)amides provides the desired 2-oxazolines in up to 99% yield. The mechanism of the reaction was studied by monitoring the reaction using spectral and analytical methods, whereby an ¹⁸O-labeling experiment furnished valuable insights. The initial step involves a stoichiometric reaction between the substrate and TAP-1, which leads to the in situ generation of the catalyst, a catechol cyclic phosphate, as well as to a pyrocatechol phosphate and two possible active intermediates. The dehydrative cyclization was also successfully conducted on the gram scale.

Studies on gold(I) and gold(III) alcohol functionalised NHC complexes

Five pairs of novel chiral alcohol functionalised gold(i) and gold(iii) NHC complexes derived from chiral amino alcohols, were synthesized and characterised (NMR, IR, HRMS). Single crystal X-ray diffraction data of gold(i) and gold(iii) complexes are reported and discussed. The chiral imidazolium preligands were readily synthesized via the oxalamides, subsequent reduction and final orthoformate condensation. An improved method was used for generation of gold(i) NHC complexes (up to 92%) and further oxidation afforded the corresponding gold(iii) NHC complexes (up to 99%). All the Au(i) and Au(iii) NHC complexes proved far more catalytically active in a 1,6-enyne alkoxycyclization test reaction than our previously tested N,N- and P,N-ligated Au(iii) complexes. Comparative gold(i) and gold(iii) catalytic studies demonstrated different catalytic ability, depending on the NHC ligand flexibility and bulkiness. Excellent yields (92-99%) of target alkoxycyclization product were obtained with both gold(i) and gold(iii) complexes with the bulky N1-Mes-N2-ethanol based NHC ligand.

P,N-Chelated Gold(III) Complexes: Structure and Reactivity

Gold(III) complexes are versatile catalysts offering a growing number of new synthetic transformations. Our current understanding of the mechanism of homogeneous gold(III) catalysis is, however, limited, with that of phosphorus-containing complexes being hitherto underexplored. The ease of phosphorus oxidation by gold(III) has so far hindered the use of phosphorus ligands in the context of gold(III) catalysis. We present a method for the generation of P,N-chelated gold(III) complexes that circumvents ligand oxidation and offers full counterion control, avoiding the unwanted formation of AuCl₄^-. On the basis of NMR spectroscopic, X-ray crystallographic, and density functional theory analyses, we assess the mechanism of formation of the active catalyst and of gold(III)-mediated styrene cyclopropanation with propargyl ester and intramolecular alkoxycyclization of 1,6-enyne. P,N-chelated gold(III) complexes are demonstrated to be straightforward to generate and be catalytically active in synthetically useful transformations of complex molecules.

Au(III) complexes with tetradentate-cyclam-based ligands

Chiral cyclam (1,4,8,11-tetraazacyclotetradecane) derivatives were synthesized stepwise from chiral mono-Boc-1,2-diamines and (dialkyl)malonyl dichloride via open diamide-bis(N-Boc-amino) intermediates (65-91%). Deprotection and ring closure with a second malonyl unit afforded the cyclam tetraamide precursors (80-95%). The new protocol allowed the preparation of the target cyclam derivatives (53-59%) by a final optimized hydride reduction. Both the open tetraamine intermediates and the cyclam derivatives successfully coordinated with AuCl₃ to give moderate to excellent yields (50-96%) of the corresponding novel tetra-coordinated N,N,N,N-Au(III) complexes with alternating five- and six-membered chelate rings. The testing of the catalytic ability of the cyclam-based N,N,N,N-Au(III) complexes demonstrated high catalytic activity of some complexes in selected test reactions (full conversion in 1-24 h, 62-97% product yields).

Gold-Catalyzed Synthesis of Small Rings

Three- and four-membered rings, widespread motifs in nature and medicinal chemistry, have fascinated chemists ever since their discovery. However, due to energetic considerations, small rings are often difficult to assemble. In this regard, homogeneous gold catalysis has emerged as a powerful tool to construct these highly strained carbocycles. This review aims to provide a comprehensive summary of all the major advances and discoveries made in the gold-catalyzed synthesis of cyclopropanes, cyclopropenes, cyclobutanes, cyclobutenes, and their corresponding heterocyclic or heterosubstituted analogs.

Catalytic Activity of trans-Bis(pyridine)gold Complexes

Gold catalysis has become one of the fastest growing fields in chemistry, providing new organic transformations and offering excellent chemoselectivities under mild reaction conditions. Methodological developments have been driven by wide applicability in the synthesis of complex structures, whereas the mechanistic understanding of Au(III)-mediated processes remains scanty and have become the Achilles’ heel of methodology development. Herein, the systematic investigation of the reactivity of bis(pyridine)-ligated Au(III) complexes is presented, based on NMR spectroscopic, X-ray crystallographic, and DFT data. The electron density of pyridines modulates the catalytic activity of Au(III) complexes in propargyl ester cyclopropanation of styrene. To avoid strain induced by a ligand with a nonoptimal nitrogen–nitrogen distance, bidentate bis(pyridine)–Au(III) complexes convert into dimers. For the first time, bis(pyridine)Au(I) complexes are shown to be catalytically active, with their reactivity being modulated by strain.

Hydration of alkynes catalyzed by [Au(X)(L)(ppy)]X in the green solvent γ-valerolactone under acid-free conditions: the importance of the pre-equilibrium step

Stable and robust [Au(H₂O)(NHC)(ppy)](X)₂ successfully catalyses the hydration of alkynes in GVL, under acid-free conditions. DFT calculation and NMR measurements suggest that pre-equilibrium is the key step of the whole process.