Stereoelectronic and Resonance Effects on the Rate of Ring Opening of N-Cyclopropyl-Based Single Electron Transfer Probes

Rearrangement, Elimination, and Ring-Opening Reactions of Cyclopropyl-Substituted Nitrenium Ions: A Computational and Experimental Investigation

N-(4-Biphenylyl)-N-cyclopropyl nitrenium ion 5 and N-benzyl-N-cyclopropyl nitrenium ion (6) were generated through photolysis of their corresponding N-aminopyridinium ion photoprecursors. In the case of 5, stable products result from a combination of cyclopropyl ring expansion (N-biphenylazetium ion) and ethylene elimination (biphenylisonitrilium ion). When present in high concentrations, methanol can add to the cyclopropyl ring-forming N-3-methoxypropyl-N-biphenyl iminium ion. In contrast, the only detectable product from the N-benzyl-N-cyclopropyl nitrenium ion (6) is benzylisonitrile, resulting from the elimination of ethylene. Density functional theory (DFT) calculations predict the product distributions from the more stable biphenyl system 5 with reasonable accuracy. However, product distributions from the less stable benzyl system 6 are forecast with less accuracy.

Cooperative Photoredox and Cobalt-Catalyzed Acceptorless Dehydrogenative Functionalization of Cyclopropylamides towards Allylic N,O-Acyl-acetal Derivatives

We disclose herein a novel photoredox and cobalt co-catalyzed ring-opening/acceptorless dehydrogenative functionalization of mono-donor cyclopropanes. This sustainable and atom-economic approach allows the rapid assembly of a wide range of allylic N,O-acyl-acetal derivatives. The starting materials are readily available and the reaction features mild conditions, broad substrate scope, and excellent functional group compatibility. The optimized conditions accommodate assorted cycloalkylamides and primary, secondary, and tertiary alcohols, with applications in late-stage functionalization of pharmaceutically relevant compounds, stimulating further utility in medicinal chemistry. Moreover, selective nucleophilic substitutions with various carbon nucleophiles were achieved in a one-pot fashion, offering a reliable avenue to access some cyclic and acyclic derivatives.

Sequential radical and cationic reactivity at separated sites within one molecule in solution

Distonic radical cations (DRCs) with spatially separated charge and radical sites are expected to show both radical and cationic reactivity at different sites within one molecule. However, such "dual" reactivity has rarely been observed in the condensed phase. Herein we report the isolation of crystalline 1λ2,3λ2-1-phosphonia-3-phosphinyl-cyclohex-4-enes 2a,b˙+, which can be considered delocalized DRCs and were completely characterized by crystallographic, spectroscopic, and computational methods. These DRCs contain a radical and cationic site with seven and six valence electrons, respectively, which are both stabilized via conjugation, yet remain spatially separated. They exhibit reactivity that differs from that of conventional radical cations (CRCs); specifically they show sequential radical and cationic reactivity at separated sites within one molecule in solution.

Multicomponent Synthesis of α-Branched Amines via a Zinc-Mediated Carbonyl Alkylative Amination Reaction

Methods for the synthesis of α-branched alkylamines are important due to their ubiquity in biologically active molecules. Despite the development of many methods for amine preparation, C(sp3)-rich nitrogen-containing compounds continue to pose challenges for synthesis. While carbonyl reductive amination (CRA) between ketones and alkylamines is the cornerstone method for α-branched alkylamine synthesis, it is sometimes limited by the sterically demanding condensation step between dialkyl ketones and amines and the more restricted availability of ketones compared to aldehydes. We recently reported a "higher-order" variant of this transformation, carbonyl alkylative amination (CAA), which utilized a halogen atom transfer (XAT)-mediated radical mechanism, enabling the streamlined synthesis of complex α-branched alkylamines. Despite the efficacy of this visible-light-driven approach, it displayed scalability issues, and competitive reductive amination was a problem for certain substrate classes, limiting applicability. Here, we report a change in the reaction regime that expands the CAA platform through the realization of an extremely broad zinc-mediated CAA reaction. This new strategy enabled elimination of competitive CRA, simplified purification, and improved reaction scope. Furthermore, this new reaction harnessed carboxylic acid derivatives as alkyl donors and facilitated the synthesis of α-trialkyl tertiary amines, which cannot be accessed via CRA. This Zn-mediated CAA reaction can be carried out at a variety of scales, from a 10 μmol setup in microtiter plates enabling high-throughput experimentation, to the gram-scale synthesis of medicinally-relevant compounds. We believe that this transformation enables robust, efficient, and economical access to α-branched alkylamines and provides a viable alternative to the current benchmark methods.

Cyclometalated Ruthenium Catalyst Enables Selective Oxidation of N-Substituted Tetrahydroquinolines to Lactams

Herein, we report an unusual α-methylene oxidation of N-substituted tetrahydroquinoline to lactams using the cyclometalated Ru(II)-complex as a catalyst. Cyclic-α-methylene C-H bonds are selectively oxidized under the reaction conditions even in the presence of α-methyl or reactive α-methylene C-H bonds. This methodology is also useful in the late-stage functionalization of pharmaceuticals. Mechanistic study demonstrates that the high-valent Ru(VI)-cis-dioxo species plays an important role in controlling selectivity.

300-fold higher neuro- and immunotoxicity from low-redox transformation of carbamazepine

Current challenges in (eco)toxicology are in understanding the transformation of (reactive) substances, and how transformation affects toxic modes of action. Empirical assessment of transformation products of, practically an infinite number of substances, via experimentation, is impossible. Predicting transformation products for (benchmarking) compounds from conditions, facilitates risk analyses. This study applied calculus to predict transformation products of an important environmental and medicinal/toxicological marker, carbamazepine. As radicals are ubiquitous in humans and the environment, we looked into radical-mediated transformations of carbamazepine as a benchmark. We calculated proportions of their speciation states as function of redox conditions, which we took as pH and O2 concentration, describing transformation via covalent and ionic interactions. Formation of ring-contracted products with neuro-immunological activity is thermodynamically favored under anaerobic conditions and at low pH. Experimentally observed product distributions and toxicities reflect that pattern. Our predictive method may support toxicity predictions for other substances and conditions 'similar' to the current case study via interpolation. This paves the way for a more coherent, effective and easier risk assessment of transformation products.

Photoredox Promoted Barbier-Type Reaction of Alkyl Iodides with N-Alkyl and N-Aryl Imines

The reaction of organozinc reagents with unactivated imines is accelerated when performed in the presence of a photocatalyst under blue light irradiation. Coordination between Lewis acidic zinc iodide and the imine is a key factor responsible for the reaction efficiency. The method can be carried out using alkyl iodides under Barbier conditions.

Photochemical Intermolecular [3σ + 2σ]-Cycloaddition for the Construction of Aminobicyclo[3.1.1]heptanes

The development of synthetic strategies for the preparation of bioisosteric compounds is a demanding undertaking in medicinal chemistry. Numerous strategies have been developed for the synthesis of bicyclo[1.1.1]pentanes (BCPs), bridge-substituted BCPs, and bicyclo[2.1.1]hexanes. However, progress on the synthesis of bicyclo[3.1.1]heptanes, which serve as meta-substituted arene bioisosteres, has not been previously explored. Herein, we disclose the first photoinduced [3σ + 2σ] cycloaddition for the synthesis of trisubstituted bicyclo[3.1.1]heptanes using bicyclo[1.1.0]butanes and cyclopropylamines. This transformation not only uses mild and operationally simple conditions but also provides unique meta-substituted arene bioisosteres. The applicability of this method is showcased by simple derivatization reactions.

Visible-Light Organophotoredox-Mediated [3 + 2] Cycloaddition of Arylcyclopropylamine with Structurally Diverse Olefins for the Construction of Cyclopentylamines and Spiro[4.n] Skeletons

We developed a visible-light-mediated [3 + 2] cycloaddition of arylcyclopropylamine with structurally diverse olefins using QXPT-NPh as a highly efficient organic photoredox catalyst. We first achieved the use of various alkyl-substituted alkenes in intermolecular [3 + 2] cycloadditions with cyclopropylamine. We also developed a general and efficient strategy for the construction of structurally diverse cyclopentane-based spiro[4.n] skeletons with 1,3-difunctional groups, which broadly exist in natural products and synthetic molecules. Furthermore, we proposed a hydrogen-bond mode between the arylcyclopropylamine and the photocatalyst QXPT-NPh.

Activation of aminocyclopropanes via radical intermediates

Aminocyclopropanes are versatile building blocks for accessing high value-added nitrogen-containing products. To control ring-opening promoted by ring strain, the Lewis acid activation of donor-acceptor substituted systems is now well established. Over the last decade, alternative approaches have emerged proceeding via the formation of radical intermediates, alleviating the need for double activation of the cyclopropanes. This tutorial review summarizes key concepts and recent progress in ring-opening transformations of aminocyclopropanes via radical intermediates, divided into formal cycloadditions and 1,3-difunctionalizations.

Synthetic Semiconductor Photoelectrochemistry

In the field of synthetic organic chemistry, photochemical and electrochemical approaches are often considered to be competing technologies that induce single electron transfer (SET). Recently, their fusion, i. e., the "photoelectrochemical" approach, has become the focus of attention. In this approach, both solar and electrical energy are used in creative combinations. Historically, the term "photoelectrochemistry" has been used in more inorganic fields, where a photovoltaic effect exhibited by semiconducting materials is employed. Semiconductors have also been studied intensively as photocatalysts; however, they recently have taken a back seat to molecular photocatalysts. In this account, we would like to revisit semiconductor photocatalysts in the field of synthetic organic chemistry to demonstrate that semiconductor "photoelectrochemical" approaches are more than mere alternatives to molecular photochemical and/or electrochemical approaches.

Interplay between Structure and Mechanism in Reductive Dissociative Electron Transfers to α,β -Epoxyketones

The electrochemical reduction of several α,β -epoxyketones was studied using cyclic (linear sweep) voltammetry, convolution voltammetry, and homogeneous redox catalysis. The results were reconciled to pertinent theories of electron transfer. α,β -Epoxyketones undergo dissociative electron-transfer reactions with C-O bond cleavage, via both stepwise and concerted mechanisms, depending on their structure. For aliphatic ketones, the preferred mechanism of reduction is consistent with the "sticky" concerted model for dissociative electron transfer. Bond cleavage occurs simultaneously with electron transfer, and there is a residual, electrostatic interaction in the ring-opened (distonic) radical anion. In contrast, for aromatic ketones, because the ring-closed radical anions are resonance-stabilized and exist at energy minima, a stepwise mechanism operates (electron transfer and bond cleavage occur in discrete steps). The rate constants for ring opening are on the order of 10⁸  s^-1 , and not significantly affected by substituents on the 3-membered ring (consistent with C-O bond cleavage). These results and conclusions were fully supported and augmented by molecular orbital calculations.