Ring-Opening Metathesis Polymer Sphere-Supported seco-Porphyrazines: Efficient and Recyclable Photooxygenation Catalysts

Metal Complexes of Porphyrinoids Containing Nonpyrrolic Heterocycles

The replacement of one or more pyrrolic building block(s) of a porphyrin by a nonpyrrolic heterocycle leads to the formation of so-called pyrrole-modified porphyrins (PMPs), porphyrinoids of broad structural variability. The wide range of coordination environments (type, number, charge, and architecture of the donor atoms) that the pyrrole-modified frameworks provide to the central metal ions, the frequent presence of donor atoms at their periphery, and their often observed nonplanarity or conformational flexibility distinguish the complexes of the PMPs clearly from those of the traditional square-planar, dianionic, N₄-coordinating (hydro)porphyrins. Their different coordination properties suggest their utilization in areas beyond which regular metalloporphyrins are suitable. Following a general introduction to the synthetic methodologies available to generate pyrrole-modified porphyrins, their general structure, history, coordination chemistry, and optical properties, this Review highlights the chemical, electronic (optical), and structural differences of specific classes of metalloporphyrinoids containing nonpyrrolic heterocycles. The focus is on macrocycles with similar "tetrapyrrolic" architectures as porphyrins, thusly excluding the majority of expanded porphyrins. We highlight the relevance and application of these metal complexes in biological and technical fields as chemosensors, catalysts, photochemotherapeutics, or imaging agents. This Review provides an introduction to the field of metallo-PMPs as well as a comprehensive snapshot of the current state of the art of their synthesis, structures, and properties. It also aims to provide encouragement for the further study of these intriguing and structurally versatile metalloporphyrinoids.

Olefin Cross Metathesis as a Versatile Method for the Facile Functionalization of Porous Polymers

Olefin cross metathesis has been employed for the first time for the postpolymerization chemical modification of porous polymers. High quality microspheres of poly(divinylbenzene) were synthesized by the precipitation polymerization of divinylbenzene-55 in porogenic solvents, and the olefin cross metathesis reactions of the pendent (polymer-bound) vinyl groups not consumed by polymerization were performed with diverse coupling partners in dichloromethane using the Grubbs 2 catalyst, leading to microspheres decorated with a wide range of functional groups.

S-seco-porphyrazine as a new member of the seco-porphyrazine family - Synthesis, characterization and photocytotoxicity against cancer cells

An important subgroup within the porphyrazine (Pz) family constitutes seco-porphyrazines, in the chemical structure of which one pyrrole unit is opened in the oxidative process. So far, there are only limited data on N-seco- and C-seco-Pzs. Here, the synthesis of a novel member of the Pzs seco-family, represented by an S-seco-tribenzoporphyrazine analogue, 22,23-bis(4-(3,5-dibutoxycarbonylphenoxy)butylsulfanyl)tribenzo[b,g,l]-22,23-dioxo-22,23-seco-porphyrazinato magnesium(II), is reported, with moderate 34% yield. The new derivative was characterized using NMR spectroscopy, UV-Vis spectroscopy, and mass spectrometry. In the photochemical study performed following the indirect chemical method with 1,3-diphenylisobenzofuran, S-seco-Pz revealed a high singlet oxygen quantum yield of 0.27 in DMF. Potential photocytotoxicity of S-seco-Pz was assessed in vitro on three cancer cell lines - two oral squamous cell carcinoma cell lines derived from the tongue (CAL 27, HSC-3) and human cervical epithelial adenocarcinoma cells (HeLa). In the biological study, the macrocycle was tested in its free form and after loading into liposomes. It is worth noting that S-seco-Pz was found to be non-toxic in the dark, with cell viability levels over 80%. The photocytotoxic IC₅₀ values for free S-seco-Pz were 0.61, 0.18, and 4.1 µM for CAL 27, HSC-3 and HeLa cells, respectively. Four different liposomal compositions were analyzed, and the cationic liposomes revealed the highest photokilling efficacy, with the IC₅₀ values for CAL 27, HSC-3, and HeLa cells at 0.24, 0.25, and 0.31 µM, respectively. The results of the photocytotoxicity study indicate that the new S-seco-tribenzoporphyrazine can be considered as a potential photosensitizer in photodynamic therapy of cancer, along with the developed cationic liposomal nanocarrier.

Development and Application of a Recyclable High-Load Magnetic Co/C Hybrid ROMP-Derived Benzenesulfonyl Chloride Reagent and Utility of Corresponding Analogues

The development and application of high-load, recyclable magnetic Co/C hybrid ROMP-derived benzenesulfonyl chloride and analogues is reported. The regeneration and utility of these reagents in the methylation/alkylation of various carboxylic acids is demonstrated via efficient retrieval of the magnetic reagent with a neodymium magnet. Additional reactions employing the analogue sulfonic acid and in situ generated magnetic benzenesulfonyl azide are also reported.

Advances in the synthesis of acyclic peroxides

This review summarises the many developments in the synthesis of acyclic peroxides, with a particular focus on the past 20 years, and seeks to update organic chemists about these new approaches.

Application of Silica-Supported Alkylating Reagents in a One-Pot, Sequential Protocol to Diverse Benzoxathiazepine 1,1-Dioxides

Applications of silica-ROMP reagents in a one-pot, sequential protocol have been developed for the synthesis of a variety of diverse benzoxathiazepine 1,1-dioxides. This protocol includes sulfonylation, intramolecular SNAr, alkylation with silica-supported oligomeric benzyl (Si-OBPn) and triazole (Si-OTPn) phosphates, and intermolecular SNAr addition with a number of secondary amines in one-pot to afford a variety of unique benzoxathiazepine 1,1-dioxides sultams in good to excellent yields.

Synthesis of High-Load, Hybrid Silica-Immobilized Heterocyclic Benzyl Phosphate (Si-OHBP) and Triazolyl Phosphate (Si-OHTP) Alkylating Reagents

The development of new ROMP-derived silica-immobilized heterocyclic phosphate reagents and their application in purification-free protocols is reported. Grafting of norbornenyl norbornenyl-functionalized (Nb-tagged) silica particles with functionalized Nb-tagged heterocyclic phosphate monomers efficiently yield high-load, hybrid silica-immobilized oligomeric heterobenzyl phosphates (Si-OHBP) and heterotriazolyl phosphates (Si-OHTP) as efficient alkylation agents. Applications of these reagents for the diversification of N-, O-, and S-nucleophilic species, for efficient heterobenzylation and hetero(triazolyl)methylation have been validated.

Silica-Supported Oligomeric Benzyl Phosphate (Si-OBP) and Triazole Phosphate (Si-OTP) Alkylating Reagents

The syntheses of silica-supported oligomeric benzyl phosphates (Si-OBP(n)) and triazole phosphates (Si-OTP(n)) using ring-opening metathesis polymerization (ROMP) for use as efficient alkylating reagents is reported. Ease of synthesis and grafting onto the surface of norbornenyl-tagged (Nb-tagged) silica particles has been demonstrated for benzyl phosphate and triazole phosphate monomers. It is shown that these silica polymer hybrid reagents, Si-OBP(n) and Si-OTP(n), can be used to carry out alkylation reactions with an array of different nucleophiles to afford the corresponding benzylated and (triazolyl)methylated products in good yield and high purity.

Singlet oxygen generation on porous superhydrophobic surfaces: effect of gas flow and sensitizer wetting on trapping efficiency

We describe physical-organic studies of singlet oxygen generation and transport into an aqueous solution supported on superhydrophobic surfaces on which silicon-phthalocyanine (Pc) particles are immobilized. Singlet oxygen ((1)O2) was trapped by a water-soluble anthracene compound and monitored in situ using a UV-vis spectrometer. When oxygen flows through the porous superhydrophobic surface, singlet oxygen generated in the plastron (i.e., the gas layer beneath the liquid) is transported into the solution within gas bubbles, thereby increasing the liquid-gas surface area over which singlet oxygen can be trapped. Higher photooxidation rates were achieved in flowing oxygen, as compared to when the gas in the plastron was static. Superhydrophobic surfaces were also synthesized so that the Pc particles were located in contact with, or isolated from, the aqueous solution to evaluate the relative effectiveness of singlet oxygen generated in solution and the gas phase, respectively; singlet oxygen generated on particles wetted by the solution was trapped more efficiently than singlet oxygen generated in the plastron, even in the presence of flowing oxygen gas. A mechanism is proposed that explains how Pc particle wetting, plastron gas composition and flow rate as well as gas saturation of the aqueous solution affect singlet oxygen trapping efficiency. These stable superhydrophobic surfaces, which can physically isolate the photosensitizer particles from the solution may be of practical importance for delivering singlet oxygen for water purification and medical devices.

Generating singlet oxygen bubbles: a new mechanism for gas-liquid oxidations in water

Laser-coupled microphotoreactors were developed to bubble singlet oxygen [(1)O(2) ((1)Δ(g))] into an aqueous solution containing an oxidizable compound. The reactors consisted of custom-modified SMA fiberoptic receptacles loaded with 150 μm silicon phthalocyanine glass sensitizer particles, where the particles were isolated from direct contact with water by a membrane adhesively bonded to the bottom of each device. A tube fed O(2) gas to the reactor chambers. In the presence of O(2), singlet oxygen was generated by illuminating the sensitizer particles with 669 nm light from an optical fiber coupled to the top of the reactor. The generated (1)O(2) was transported through the membrane by the O(2) stream and formed bubbles in solution. In solution, singlet oxygen reacted with probe compounds (9,10-anthracene dipropionate dianion, trans-2-methyl-2-pentanoate anion, N-benzoyl-D,L-methionine, or N-acetyl-D,L-methionine) to give oxidized products in two stages. The early stage was rapid and showed that (1)O(2) transfer occurred via bubbles mainly in the bulk water solution. The later stage was slow; it arose only from (1)O(2)-probe molecule contact at the gas/liquid interface. A mechanism is proposed that involves (1)O(2) mass transfer and solvation, where smaller bubbles provide better penetration of (1)O(2) into the flowing stream due to higher surface-to-volume contact between the probe molecules and (1)O(2).

Microwave assisted solid-phase synthesis of substituted tetraazaporphyrins and a phthalocyanine-peptide conjugate

Various asymmetrically substituted phthalocyanines (Pcs) and porphyrazines (Pzs) have been synthesized in good yields using a solid-phase synthesis method with a poly(ethylene glycol) (PEG) resin attached to an indole linker as the solid support. These compounds are formed by cross condensation of maleonitrile or phthalonitrile with another phthalonitrile covalently bonded to the solid support with an amino linking group. The polymer bound Pc or Pz is separated by filtration, and washing the symmetrical Pc or Pz by-product. The amine Pc -appended to polyethylene glycol resin is further reacted to yield azide whilst still on the solid support. Cleavage of the Pc or Pz off the solid support results in 3:1 asymmetric Pz or Pz with high degree of purity, requiring minimal further purification. The use of hydrophilic PEG-based resin allows the symmetrical compound to be removed completely by washing whereas the acid labile indole linker makes it easier to cleave the product under mild conditions. The conjugation abilities of these compounds have been demonstrated by the successful conjugation of one of the azide Pcs with a peptide elaborated with an alkyne function. Use of microwave for the synthesis of these compounds results in shorter reaction times, higher yields and higher degree of purity.

Formation of superhydrophobic microspheres of poly(vinylidene fluoride- hexafluoropropylene)/graphene composite via gelation

We report on the spontaneous formation of superhydrophobic poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)/graphene composite microspheres with uniform size via gelation. When the suspension of PVDF-HFP/graphene (0.25 wt. % with respect to PVDF-HFP) in DMF adsorbs water vapor, it changes to a hybrid gel. A dried porous gel is obtained after solvent exchange and freeze drying. Morphology characterization shows that this hybrid gel is composed of PVDF-HFP/graphene microspheres with a diameter of 8-10 μm. In contrast, PVDF-HFP solution gives rise to a cellular microstructure following the same experimental procedures. We further elucidate the formation mechanism on the basis of the characterization by freeze fracture transmission electron microscopy, X-ray diffraction, and differential scanning calorimetry characterizations. Furthermore, contact angle measurements of water on PVDF-HFP/graphene indicates that the hydrophobic nature of PVDF-HFP combined with the micro/nanoscale hierarchical texture creates a superhydrophobic surface. Such superhydrophobic microspheres may have potential applications as water-repellent catalyst-supporting materials.

Monomer-on-monomer (MoM) Mitsunobu reaction: facile purification utilizing surface-initiated sequestration

A monomer-on-monomer (MoM) Mitsunobu reaction utilizing norbornenyl-tagged (Nb-tagged) reagents is reported, whereby purification was rapidly achieved by employing ring-opening metathesis polymerization, which was initiated by any of three methods utilizing Grubbs catalyst: (i) free catalyst in solution, (ii) surface-initiated catalyst-armed silica, or (iii) surface-initiated catalyst-armed Co/C magnetic nanoparticles.

Synthesis and chemistry of 2,3-dioxabicyclo[2.2.2]octane-5,6-diols

1,4-Disubstituted 2,3-dioxabicyclo[2.2.2]oct-5-enes were dihydroxylated with osmium tetroxide to yield diols anti to the peroxide linkage in a highly selective manner. Reduction of the peroxide bond furnished cyclohexane-1,2,3,4-tetraols with toxocarol relative stereochemistry in excellent yield. This new methodology was employed to synthesize the natural product (1S,2R,3S,4R,5R)-2-methyl-5-(propan-2-yl)cyclohexane-1,2,3,4-tetrol (1) in a short sequence from (R)-alpha-phellandrene. Moreover, during the study of the chemistry of 2,3-dioxabicyclo[2.2.2]octane-5,6-diols a hitherto unknown rearrangement was discovered which has wide applicability for the synthesis of 1,4-dicarbonyls, including optically enriched synthons. A broad range of mechanistic investigations applicable to this rearrangement are also reported.

Physicochemical characterization of subporphyrazines--lower subphthalocyanine homologues

Physicochemical characterization of boron(III) subporphyrazines (SubPzs)--lower subphthalocyanine (SubPc) homologues--has been carried out for the first time. The SubPz macrocycle can act both as an oxidizing and a reducing entity, giving rise to stable radical anion or radical cation species, respectively. SubPzs are luminescent and exhibit fluorescence quantum yields that are in the range known for SubPcs. The peripheral substitution plays a dramatic role with respect to the luminescence properties. Moreover, as with SubPcs, deactivation of the singlet excited state of the SubPzs by intersystem crossing affords long-lived triplet excited states, which are amenable to being used as singlet-oxygen generators. Subporphyrazines are also promising electro- and photoactive materials for molecular photovoltaics.

Porphyrazines: Designer Macrocycles by Peripheral Substituent Change

It is rare that such a diverse array of applications can be realized from a single basic molecular unit, however, such is the power of the tetrapyrrolic macrocycle motif. Indeed, their potential in areas such as chemical dyes, optical sensors, optoelectronics, and biomedical agents is a function of their rich electronic and optical properties. While the naturally occurring porphyrins and the synthetic phthalocyanines have been extensively studied, the related tetraazaporphyrins or porphyrazines remain comparatively underdeveloped. Since porphyrazines maintain a unique position in this family: analogous derivatives are virtually inaccessible for the porphyrins, and direct fusion of heteroatomic substituents onto the porphyrazine β-positions results in a more pronounced effect compared with the substitution of an equivalent group onto the benzenoid rings of the phthalocyanine; a driving force exists to further explore the synthesis and applications of these novel macrocycles. This review will provide a historical overview of the synthetic strategies towards functionalized porphyrazines and describe new strategies towards the preparation and applications of heteroatom-appended porphyrazines, particularly in the context of their multimetallic complexes, catalysis, surface chemistry, and as biomedical agents.

Immobilized Triazine-Type Dehydrocondensing Reagents for Carboxamide Formation: ROMP-Trz-Cl and ROMP(OH)-Trz-Cl

New triazine-type dehydrocondensing reagents, such as ROMP-Trz-Cl and ROMP(OH)-Trz-Cl, were synthesized by a ring opening metathesis polymerization (ROMP) method, and these showed higher loading than conventional polymer-supported condensing reagents. These polymers effect the formation of amides in good yields by addition of a mixture of carboxylic acid, amine and NMM. ROMP(OH)-Trz-Cl, which contains hydroxyl groups in the polymer chain, gave amides in good yields even in MeOH.